Comparison of heat pump performance using fin-and-tube and microchannel heat exchangers under frost conditions
Integrity signals
Registry
Cites
Statistics
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
When a microchannel heat exchanger works in winter, frost forms and accumulates faster on the fin surface, leading to decreased airflow rate, increased thermal resistance, and reduced heating capacity of heat pump units.
“However, when the MCHX works in the winter, the frost will form and accumulate faster on the fin surface [6,7], which will lead to a decrease in airflow rate and an increase in the thermal resistance, thus reducing the heating capacities of the heat pump units [8][9][10].”
From Performance Improvement of Microchannel Heat Exchangers with Modified Louver Fins under Frosting Conditions (2023) · cites this paper as [7]
The frosting time of MCHX is 20-50% shorter than that of conventional fin-and-tube heat exchangers.
“Previous studies have shown that the frosting time of MCHX is 20 -50% shorter than that of conventional FTHX [11,12].”
Uneven refrigerant distribution was the main factor affecting the frosting performance of the MCHX heat pump system.
“Shao et al. [12] claimed that uneven refrigerant distribution was the main factor affecting the frosting performance of the MCHX heat pump system.”
Refrigerant distribution in microchannel heat exchangers is the key factor for microchannel heat pump thermal performance during frost period.
“revealed that refrigerant distribution in the microchannel heat exchangers is the key factor for microchannel heat pump thermal performance during the frost period.”
Frost period of finned-tube heat pump system is much longer than that of microchannel heat pump system.
“They reported that the frost period of the finned-tube heat pump system was much longer than that of the microchannel heat pump system”
Cites
Lemmon, E. W., Huber, M. L., & McLinden, M. O. (2007) · Cited by 4,207 · see citing works
New equations for heat and mass transfer in turbulent pipe and channel flow
Gnielinski, V. (1976) · Medical Entomology and Zoology · Cited by 4,037 · see citing works
Analysis of heat and mass transfer
Eckert, E. R. G., & Drake, R. M. (1971) · Medical Entomology and Zoology · Cited by 1,977 · see citing works
A general correlation for flow boiling in tubes and annuli
Gungor, K., & Winterton, R. H. S. (1986) · International Journal of Heat and Mass Transfer · doi:10.1016/0017-9310(86)90205-x · Cited by 1,291 · see citing works
Reference Fluid Thermodynamic and Transport Properties (REFPROP)
Lemmon, E. W. (2007) · Medical Entomology and Zoology · Cited by 991 · see citing works
Evaporation heat transfer and pressure drop of refrigerant R-134a in a small pipe
Yan, Y.-Y., & Lin, T. (1998) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(98)00127-6 · Cited by 380 · see citing works
Air-side thermal hydraulic performance of multi-louvered fin aluminum heat exchangers
Kim, M.-H., & Bullard, C. W. (2002) · International Journal of Refrigeration · doi:10.1016/s0140-7007(01)00025-1 · Cited by 280 · see citing works
Yao, Y., Jiang, Y., Deng, S., & Ma, Z. (2004) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.03.013 · Cited by 196 · see citing works
Evaporative heat transfer and pressure drop of R410A in microchannels
Yun, R., Heo, J. H., & Kim, Y. (2005) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2005.08.005 · Cited by 159 · see citing works
Seker, D., Karatas, H., & Egrican, N. (2004) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2003.12.003 · Cited by 147 · see citing works
Dimensionless correlations of frost properties on a cold plate
Yang, D.-K., & Lee, K.-S. (2004) · International Journal of Refrigeration · doi:10.1016/s0140-7007(03)00118-x · Cited by 134 · see citing works
Design and multi-objective optimization of heat exchangers for refrigerators
Gholap, A., & Khan, J. A. (2007) · Applied Energy · doi:10.1016/j.apenergy.2007.02.014 · Cited by 130 · see citing works
(1967) · ASHRAE winter conference papers · Cited by 128 · see citing works
R-744 gas cooler model development and validation
Yin, J. M., Bullard, C. W., & Hrnjak, P. S. (2001) · International Journal of Refrigeration · doi:10.1016/s0140-7007(00)00082-7 · Cited by 118 · see citing works
Huang, D., Li, Q., & Yuan, X. (2009) · Applied Energy · doi:10.1016/j.apenergy.2008.11.023 · Cited by 118 · see citing works
Technical Note A heat transfer and friction correlation for wavy fin-and-tube heat exchangers
Wang, C., Jang, J. Y., & Chiou, N.-F. (1999) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(98)00288-9 · Cited by 111 · see citing works
Flow resistance with boiling refrigerants-Part II
Pierre, B. (1964) · ASHRAE journal · Cited by 99 · see citing works
Development of a microchannel evaporator model for a CO2 air-conditioning system
Kim, M.-H., & Bullard, C. W. (2001) · Energy · doi:10.1016/s0360-5442(01)00042-1 · Cited by 78 · see citing works
Modeling of frosting behavior on a cold plate
Yang, D.-K., & Lee, K.-S. (2005) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2004.08.001 · Cited by 77 · see citing works
Çomaklı, K., Şimşek, F., Çomaklı, Ö., & Şahin, B. (2009) · Applied Energy · doi:10.1016/j.apenergy.2009.03.003 · Cited by 70 · see citing works
Defrost improvement by heat pump refrigerant charge compensating
Zhiyi, W., Xinmin, W., & Zhiming, D. (2008) · Applied Energy · doi:10.1016/j.apenergy.2008.02.020 · Cited by 65 · see citing works
Fan supplied heat exchanger fin performance under frosting conditions
Chen, H., Thomas, L., & Besant, R. W. (2003) · International Journal of Refrigeration · doi:10.1016/s0140-7007(02)00011-7 · Cited by 59 · see citing works
Seker, D., Karatas, H., & Egrican, P. D. N. (2004) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2003.12.004 · Cited by 56 · see citing works
Barbosa, J. R., Jr., de Melo, C. M. R., Hermes, C. J. L., & Waltrich, P. J. (2009) · Applied Energy · doi:10.1016/j.apenergy.2008.11.027 · Cited by 56 · see citing works
Performance of finned-tube heat exchangers under frosting conditions: I. Simulation model
Kondepudi, S. N., & O'Neal, D. L. (1993) · International Journal of Refrigeration · doi:10.1016/0140-7007(93)90045-a · Cited by 54 · see citing works
STUDY OF FROST FORMATION BASED ON A THEORETICAL MODEL OF THE FROST LAYER.
Hayashi, Y., Aoki, K., & YUHARA, H. (1977) · Cited by 51 · see citing works
Effects of thermal conduction in microchannel gas coolers for carbon dioxide
Asinari, P., Cecchinato, L., & Fornasieri, E. (2004) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2004.04.001 · Cited by 49 · see citing works
Xia, Y., & Jacobi, A. M. (2004) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2004.01.019 · Cited by 44 · see citing works
Numerical modeling of serpentine microchannel condensers
Shao, L.-L., Yang, L., Zhang, C., & Gu, B. Q. (2009) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2009.02.007 · Cited by 42 · see citing works
Self-citationNumerical analysis on a microchannel evaporator designed for CO2 air-conditioning systems
Yun, R., Kim, Y., & Park, C. (2006) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.10.036 · Cited by 37 · see citing works
(2002) · Purdue e-Pubs (Purdue University System) · Cited by 19 · see citing works
(2000) · Purdue e-Pubs (Purdue University System) · Cited by 15 · see citing works
Flagged first, then by citations
Cited by
Sorted by citations
A review of heat transfer and pressure drop characteristics of single and two-phase microchannels
Asadi, M., Xie, G., & Sunden, B. A. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.07.090 · Cited by 245 · see citing works
A comprehensive review on microchannel heat sinks for electronics cooling
Yu, Z., Li, M., & Cao, B. (2023) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ad12d4 · Cited by 229 · see citing works
Amer, M., & Wang, C.-C. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.01.120 · Cited by 218 · see citing works
Review of energy efficiency and system performance of residential heat pump water heaters
Willem, H., Lin, Y., & Lekov, A. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.02.023 · Cited by 199 · see citing works
Wang, H., Peterson, R., Harada, K. J., Miller, E., Ingram-Goble, R., Fisher, L., Yih, J., & Ward, C. (2010) · Energy · doi:10.1016/j.energy.2010.10.020 · Cited by 181 · see citing works
Icephobic Strategies and Materials with Superwettability: Design Principles and Mechanism
Jamil, M. I., Ali, A., Haq, F., Zhang, Q., Zhan, X., & Chen, F. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b03276 · Cited by 153 · see citing works
Tang, J., Gong, G., Su, H., Wu, F., & Herman, Č. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.02.042 · Cited by 122 · see citing works
Wang, F., Wang, Z., Zheng, Y., Lin, Z., Hao, P., Huan, C., & Wang, T. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.11.018 · Cited by 118 · see citing works
Tuo, H., & Hrnjak, P. (2013) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2013.06.002 · Cited by 99 · see citing works
Liquid infused surfaces with anti-icing properties
Wang, G., & Guo, Z. (2019) · Nanoscale · doi:10.1039/c9nr06934h · Cited by 91 · see citing works
Patil, M. S., Seo, J.-H., & Lee, M.-Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.11.107 · Cited by 86 · see citing works
Chung, Y., Yoo, J. W., Kim, G. T., & Kim, M. S. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.10.085 · Cited by 81 · see citing works
Determination method of defrosting start-time based on temperature measurements
Kim, M.-H., & Lee, K.-S. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.02.071 · Cited by 79 · see citing works
Xu, B., Han, Q., Chen, J., Li, F., Wang, N., Li, D., & Pan, X. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.09.026 · Cited by 71 · see citing works
Kosmadakis, G. M., Landelle, A., Lazova, M., Manolakos, D., Kaya, A., Huisseune, H., Karavas, C.-S. G., Tauveron, N., Revellin, R., Haberschill, P., et al. (2016) · Energy · doi:10.1016/j.energy.2016.10.047 · Cited by 68 · see citing works
Xiong, T., Liu, G., Huang, S., Yan, G. F., & Yu, J. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117820 · Cited by 66 · see citing works
Byrne, P., Miriel, J., & Lénat, Y. (2011) · Applied Energy · doi:10.1016/j.apenergy.2011.03.002 · Cited by 63 · see citing works
A frost-free dedicated outdoor air system with exhaust air heat recovery
Zhang, Z., Zhang, C., Ge, M.-C., & Yu, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.09.091 · Cited by 63 · see citing works
Self-citationPotential use of smart coatings for icephobic applications: A review
Shamshiri, M., Jafari, R., & Momen, G. (2021) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2021.127656 · Cited by 61 · see citing works
Wang, Y., Zong, S., Song, Y., Cao, F., He, Y., & Gao, Q. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117606 · Cited by 60 · see citing works
A study on thermohydraulic characteristics of fluid flow through microchannels
Sharma, J. P., Sharma, A., Jilte, R. D., Kumar, R., & Ahmadi, M. H. (2019) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-019-08741-4 · Cited by 56 · see citing works
Barbosa, J. R., Jr., de Melo, C. M. R., Hermes, C. J. L., & Waltrich, P. J. (2009) · Applied Energy · doi:10.1016/j.apenergy.2008.11.027 · Cited by 56 · see citing works
Huang, W., Zhang, T., Ji, J., & Xu, N. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2018.12.033 · Cited by 54 · see citing works
Experimental investigation of frost formation on a parallel flow evaporator
Wu, J., Ouyang, G., Hou, P., & Xiao, H. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.11.006 · Cited by 53 · see citing works
Slippery Photothermal Trap for Outstanding Deicing Surfaces
Jamil, M. I., Wang, Q., Ali, A., Hussain, M. A., Aziz, T., Zhan, X., & Zhang, Q. (2021) · Journal of Bionic Engineering · doi:10.1007/s42235-021-0046-7 · Cited by 53 · see citing works
Desiccant coated heat exchanger and its applications
Zhao, L., Wang, R. Z., & Ge, T. (2021) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2021.06.008 · Cited by 52 · see citing works
Konrad, M. E., & MacDonald, B. D. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113739 · Cited by 52 · see citing works
Heat and mass transfer comparisons of desiccant coated microchannel and fin-and-tube heat exchangers
Sun, X., Dai, Y., Ge, T., Zhao, Y., & Wang, R. Z. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.01.071 · Cited by 50 · see citing works
Performance comparison of air-source heat pump water heater with different expansion devices
Peng, J.-W., Li, H., & Zhang, C. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.01.113 · Cited by 49 · see citing works
Self-citationHuang, W., Ji, J., Xu, N., & Li, G. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.03.048 · Cited by 49 · see citing works
Liu, X., Yu, J., & Yan, G. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114634 · Cited by 47 · see citing works
Lazova, M., Huisseune, H., Kaya, A., Lecompte, S., Kosmadakis, G. M., & Paepe, M. D. (2016) · Energies · doi:10.3390/en9060432 · Cited by 44 · see citing works
Review on frosting, defrosting and frost management techniques in industrial food freezers
Badri, D., Toublanc, C., Rouaud, O., & Michel Havet, C. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111545 · Cited by 43 · see citing works
Li, K., Xia, D., Luo, S., Zhao, Y., Tu, R., Zhou, X., Zhang, H., & Su, L. (2022) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117766 · Cited by 40 · see citing works
Process simulation and analysis of a closed-loop heat pump clothes dryer
Cao, X. S., Zhang, J., Li, Z., Shao, L.-L., & Zhang, C. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.117545 · Cited by 40 · see citing works
Self-citationMeng, J., Liu, M., Zhang, W., Cao, R., Li, Y., Zhang, H., Gu, X., Du, Y. C., & Geng, Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.007 · Cited by 39 · see citing works
A new method of defrosting evaporator coils
Mader, G., & Thybo, C. (2012) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.01.033 · Cited by 37 · see citing works
Ko, Y.-M., Song, J., Lee, J. W., Sohn, S., Song, C.-H., Khoshvaght-Aliabadi, M., Kim, Y., & Kang, Y. T. (2024) · Energy · doi:10.1016/j.energy.2023.129609 · Cited by 37 · see citing works
Xiong, T., Ying, Y., Han, B., Yan, G., & Yu, J. (2021) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2021.09.003 · Cited by 35 · see citing works
Chen, S.-L., Chen, K., Zhu, X., Jin, X.-Q., & Du, Z.-M. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.119702 · Cited by 31 · see citing works
Performance enhancement of a thermally activated cooling system using microchannel heat exchangers
Wang, H., & Peterson, R. B. (2011) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2011.05.026 · Cited by 31 · see citing works
Kong, X.-Q., Li, J.-Y., Wang, B., & Li, Y. (2020) · Solar Energy · doi:10.1016/j.solener.2019.11.104 · Cited by 29 · see citing works
Sarmiento, A. P., de Sá Sarmiento, F. I. P., Shooshtari, A., & Ohadi, M. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.123680 · Cited by 29 · see citing works
Yoo, J., Chung, Y., Kim, G. T., Song, C.-W., Yoon, P., Sa, Y., & Kim, M. S. (2018) · International journal of refrigeration · doi:10.1016/j.ijrefrig.2018.08.014 · Cited by 22 · see citing works
Xiong, T., Liu, G., Gao, Q., Yan, G., & Yu, J. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2022.105654 · Cited by 26 · see citing works
Achieving deep dehumidification through a heat pump-boosted desiccant wheel system
Cheng, J., Wang, Z., Cao, X. S., Li, X., & Zhang, C. (2024) · Energy Conversion and Management · doi:10.1016/j.enconman.2024.118604 · Cited by 26 · see citing works
Self-citationA Study on Electric Vehicle Heat Pump Systems in Cold Climates
Zhang, Z., Li, W., Shi, J., & Chen, J. (2016) · Energies · doi:10.3390/en9110881 · Cited by 26 · see citing works
Qiao, H., Aute, V., & Radermacher, R. (2017) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2017.08.020 · Cited by 25 · see citing works
Zhang, Z., Cao, X. S., Yang, Z., Shao, L.-L., & Zhang, C. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.02.080 · Cited by 24 · see citing works
Self-citationFlat tube heat exchangers: Experimental analysis of frosting and water retention
Westhaeuser, J., Brauchle, L., Albrecht, J.-C., Tegethoff, W., Lemke, N., & Koehler, J. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119319 · Cited by 24 · see citing works
Li, F., Shi, K., Sun, X., Yue, B., Huang, D., Zhao, R., & Zhao, Y. (2024) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2024.03.011 · Cited by 22 · see citing works
Ma, D., Chen, Q., & Yan, G. F. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.123359 · Cited by 22 · see citing works
Li, K., Xia, D., Bao, J., Luo, S., Zhang, H., Liu, N., Su, L., & Sheng, L. (2021) · Case Studies in Thermal Engineering · doi:10.1016/j.csite.2021.101281 · Cited by 22 · see citing works
Experimental investigation of Al–Cu composed tube–fin heat exchangers for air conditioner
Wang, S., Cheng, S., Yu, H., Rao, Z., & Liu, Z. (2013) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2013.08.007 · Cited by 22 · see citing works
Experimental analysis of an air–water heat pump with micro-channel heat exchanger
Brignoli, R., Cecchinato, L., & Zilio, C. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.08.027 · Cited by 21 · see citing works
Physics-informed deep residual neural network for finned-tube evaporator performance prediction
Liang, X.-Y., Zhang, B., & Zhang, C. (2024) · Energy · doi:10.1016/j.energy.2024.131822 · Cited by 21 · see citing works
Self-citationSustainable anti-frosting surface for efficient thermal transport
Wen, R.-F., Ying, Y., Ma, X.-H., & Yang, R. (2022) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2022.100937 · Cited by 24 · see citing works
Tian, Z., Ma, L., Gu, B. Q., Yang, L., & Liu, F. (2015) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2015.10.032 · Cited by 21 · see citing works
Self-citationApproaching optimum COP by refrigerant charge management in transcritical CO2 heat pump water heater
He, Y.-J., Liang, X., Cheng, J., Shao, L.-L., & Zhang, C. (2020) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2020.06.011 · Cited by 21 · see citing works
Self-citationQu, X., Shi, J., Qi, Z., & Chen, J. (2011) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2011.04.051 · Cited by 20 · see citing works
Analysis of cyclic frosting and defrosting of a vehicle heat pump
Westhaeuser, J., Schatz, H., Albrecht, J.-C., Tegethoff, W. J., Lemke, N., & Koehler, J. (2023) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2023.05.011 · Cited by 18 · see citing works
A novel defrosting method in gasoline vapor recovery application
Liang, J., Sun, L. M., & Li, T. (2018) · Energy · doi:10.1016/j.energy.2018.08.172 · Cited by 18 · see citing works
Saadatfar, B., Fakhrai, R., & Fransson, T. (2013) · Cited by 17 · see citing works
Yang, X., Liu, X., Dong, X.-J., Meng, Y., Hou, Y., & Lai, T.-W. (2022) · Energy Storage and Saving · doi:10.1016/j.enss.2022.05.001 · Cited by 16 · see citing works
Zhu, J., Sun, H., Liu, X.-H., Sun, Z.-L., & Lei, Z. (2022) · International journal of refrigeration · doi:10.1016/j.ijrefrig.2022.06.031 · Cited by 15 · see citing works
Cheng, J., Cao, X. S., Shao, L.-L., & Zhang, C. (2023) · Energy · doi:10.1016/j.energy.2023.127989 · Cited by 16 · see citing works
Self-citationDesign and analysis of a novel dual source vapor injection heat pump using exhaust and ambient air
Li, J., Fan, Y., Zhao, X., Bai, X., Zhou, J., Badiei, A., Myers, S., & Ma, X. (2020) · Energy and Built Environment · doi:10.1016/j.enbenv.2020.11.004 · Cited by 16 · see citing works
Han, X., Fan, W., Qu, M., Chen, J., & Chen, Q. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.03.011 · Cited by 15 · see citing works
Sun, H., Zhu, J., Liu, X.-H., Sun, Z., & Lei, Z. (2022) · International journal of refrigeration · doi:10.1016/j.ijrefrig.2022.03.023 · Cited by 13 · see citing works
Superhydrophobic Microchannel Heat Exchanger for Electric Vehicle Heat Pump Performance Enhancement
Sui, Y., Sui, Z., Liang, G., & Wu, W. (2023) · Sustainability · doi:10.3390/su151813998 · Cited by 14 · see citing works
Experimental Study on Frost Height of Round Plate Fin-Tube Heat Exchangers for Mobile Heat Pumps
Lee, M., Kim, Y., & Lee, D.-Y. (2012) · Energies · doi:10.3390/en5093479 · Cited by 14 · see citing works
Li, K., Luo, S., Yu, J., Tang, Q., Su, L., & Fang, Y. (2020) · International Journal of Energy Research · doi:10.1002/er.5519 · Cited by 13 · see citing works
Lyu, W., Xu, Z., Xu, Y., Wang, Z., Jiang, C., Li, X., Li, J., & Gou, X. (2025) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2025.07.025 · Cited by 12 · see citing works
Luo, B., Li, F., Wu, S., Shi, K., Ding, Y., Zhao, R., Huang, D., & Shi, W. (2025) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2025.01.030 · Cited by 11 · see citing works
Liu, X., Chen, H., Wang, X., & Kefayati, G. (2020) · Energies · doi:10.3390/en13051065 · Cited by 11 · see citing works
Jagirdar, M., & Lee, P. S. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.12.111 · Cited by 10 · see citing works
Toward Anti-icing and De-icing Surfaces: Effects of Surface Topography and Temperature
Heydari, G. (2016) · KTH Publication Database DiVA (KTH Royal Institute of Technology) · Cited by 10 · see citing works
Yousaf, S., Bradshaw, C. R., Kamalapurkar, R., & San, O. (2025) · Science and Technology for the Built Environment · doi:10.1080/23744731.2025.2460374 · Cited by 9 · see citing works
A multi-mode packaged dedicated outdoor air system embedded with a four-coil heat pump
Cheng, J., Cao, X. S., Shao, L.-L., & Zhang, C. (2023) · Energy and Buildings · doi:10.1016/j.enbuild.2023.113222 · Cited by 9 · see citing works
Self-citationSpontaneous Formation of a Sustainable Antifreeze Coating by Peptide Self-Assembly
Kaganovich, M., Gibeon, E., Bakalinsky, A. S., Shalev, D. E., Braslavsky, I., & Reches, M. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c22816 · Cited by 8 · see citing works
A prediction model of air-source heat pump system performance with frost-retarded heater
Wu, S., Sun, Y. J., Wang, F., Ma, Z., Zhao, R., & Huang, D. (2024) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2024.123315 · Cited by 8 · see citing works
Xiong, T., Liu, G., & Yan, G. (2023) · Applied Sciences · doi:10.3390/app13116378 · Cited by 6 · see citing works
James, A., Raj, A. K., Srinivas, M., Mohanraj, M. P., & Jayaraj, S. (2023) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2023.101720 · Cited by 5 · see citing works
Wang, S., Cheng, J.-H., & Zhang, C. (2025) · Energy and Buildings · doi:10.1016/j.enbuild.2025.116052 · Cited by 4 · see citing works
Self-citationConsistent control strategy for CO2 refrigeration systems based on refrigerant charge management
He, Y.-J., Tai, Y.-D., Zhao, X., & Zhang, C. (2022) · International Journal of Refrigeration · doi:10.1016/j.ijrefrig.2022.09.009 · Cited by 4 · see citing works
Self-citationFeng, Y., Zhang, W., Zhang, Z., Shao, X., Liu, P., & Wang, X. (2022) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-022-11774-x · Cited by 4 · see citing works
Moghadam, S. G., Momen, G., & Jafari, R. (2025) · Journal of Ionic Liquids · doi:10.1016/j.jil.2025.100139 · Cited by 3 · see citing works
Chen, Y., Song, Y., Xie, H., Yang, M., Cao, F., Pang, X., Bai, G., Wang, X., & Wang, X. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.130795 · Cited by 3 · see citing works
Zhang, Z., Chen, M., Zhang, W., & Wang, X. (2021) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101827 · Cited by 3 · see citing works
Advancements in dynamic simulation techniques for refrigeration cycles: A comprehensive review
Murthy, A. A., Praveen Shenoy, K., Krishan, G., Patil, I. S., Gangadharan, K. V., & Cholleti, E. R. (2024) · Energy 360. · doi:10.1016/j.energ.2024.100007 · Cited by 2 · see citing works
Zheng, H., Jiang, S., Wang, F., & Wang, X. (2024) · 2024 7th International Conference on Computer Information Science and Application Technology (CISAT) · doi:10.1109/cisat62382.2024.10695276
Wang, S., Ke, H., Li, X., & Cheng, S. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.12.010 · Cited by 2 · see citing works
Safikhani, H., & Shabani, H. (2020) · International Journal of Engineering · doi:10.5829/ije.2020.33.12c.17 · Cited by 2 · see citing works
NUMERICAL MODEL FOR MICROCHANNEL CONDENSERS AND GAS COOLERS WITH AN IMPROVED AIR-SIDE APPROACH
Ballester, S. M. (2012) · doi:10.4995/thesis/10251/17453 · Cited by 2 · see citing works
Economic analysis of air-water heat pump technologies with a screening method
Mader, G. (2015) · KTH Publication Database DiVA (KTH Royal Institute of Technology) · Cited by 2 · see citing works
Wang, Y., Zheng, W., Wu, W., Jiang, Y., & Sun, C. (2025) · Energy · doi:10.1016/j.energy.2025.138423 · Cited by 1 · see citing works
Lee, M.-Y. (2012) · Advances in Mechanical Engineering · doi:10.1155/2012/863731 · Cited by 2 · see citing works
Calabrese, N., Mastrullo, R. M. A., & Mauro, A. W. (2012) · ENEA Open Archive (National Agency for New Technologies, Energy and Sustainable Economic Development)
- Authors
- Shao, L.-L., Yang, L., & Zhang, C.-L.
- Affiliations
- Shanghai Jiao Tong University (CN)
- Corresponding author
- Zhang, Chun-Lu
- ORCID
- Zhang, Chun-Lu
- Venue
- Applied Energy
- Publisher
- Elsevier BV
- Published
- 2010-04
- Volume
- 87
- Issue
- 4
- Pages
- 1187-1197
- ISSN
- 0306-2619 (ISSN-L)
- OpenAlex
- W2157064791
- Cited by
- 112
- References
- 32
- Citations by year
- 2026: 6 · 2025: 8 · 2024: 9 · 2023: 9 · 2022: 10 · 2021: 11 · 2020: 6 · 2019: 7 · 2018: 5 · 2017: 7 · 2016: 9 · 2015: 4 · 2014: 4 · 2013: 3 · 2012: 8
- FWCI
- 9.35
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Applied Energy (publishedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Refrigeration and Air Conditioning Technologies
- Physical Sciences › Engineering › Mechanical Engineering › Heat Transfer and Optimization
- Physical Sciences › Engineering › Mechanical Engineering › Adsorption and Cooling Systems
- Keywords
- heat pumps, microchannel heat exchangers, finned tube heat exchanger, evaporator performance, fan speed, fin density, refrigerant charge reduction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
