The DOI matches its Crossref record; 81 of the 81 references it cites were found in a registry or an index.
A review of fabrication polymer scaffolds for biomedical applications using additive manufacturing techniques
Abstract
This paper presents the current state-of-the art of additive manufacturing (AM) applications in the biomedical field, especially in tissue engineering. Multiple advantages of additive manufacturing allow to precise three-dimensional objects fabrication with complex structure using various materials. Depending on the purpose of the manufactured part, different AM technologies are implemented, in which a specific material can be utilized. In the biomedical field, there are used several techniques such as: Binder Jetting, Material Extrusion, Material Jetting, Powder Bed Fusion, Sheet Lamination, Vat Polymerization. This article focuses on the utilization of polymer materials (natural and synthetic) taking into account hydrogels in scaffolds fabrication. Assessment of polymer scaffolds mechanical properties enables personalized patient care, as well as prevents damage after implantation in human body. By controlling process parameters it is possible to obtain optimised mechanical properties of manufactured parts.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Alginate: Properties and biomedical applications
Lee, K. Y., & Mooney, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.003 · Cited by 8,095
Porosity of 3D biomaterial scaffolds and osteogenesis
Karageorgiou, V., & Kaplan, D. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.002 · Cited by 6,622
Hydrogel: Preparation, characterization, and applications: A review
Ahmed, E. M. (2015) · Journal of Advanced Research · doi:10.1016/j.jare.2013.07.006 · Cited by 5,800
Scaffolds in tissue engineering bone and cartilage
Hutmacher, D. W. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00121-6 · Cited by 4,994
Hydrogels for biomedical applications
Hoffman, A. S. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(01)00239-3 · Cited by 4,864
Hydrogels for biomedical applications
Hoffman, A. S. (2012) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2012.09.010 · Cited by 3,396
Polyionic hydrocolloids for the intestinal delivery of protein drugs: alginate and chitosan—a review
George, M., & Abraham, T. E. (2006) · Journal of Controlled Release · doi:10.1016/j.jconrel.2006.04.017 · Cited by 2,012
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
Zein, I., Hutmacher, D. W., Tan, K. C., & Teoh, S. H. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00232-0 · Cited by 1,874
Alginate Hydrogels as Biomaterials
Augst, A. D., Kong, H. J., & Mooney, D. J. (2006) · Macromolecular Bioscience · doi:10.1002/mabi.200600069 · Cited by 1,839
3D bioactive composite scaffolds for bone tissue engineering
Turnbull, G., Clarke, J., Picard, F., Riches, P., Jia, L., Han, F., Li, B., & Shu, W. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.10.001 · Cited by 1,332
Bioactive calcium phosphate materials and applications in bone regeneration
Jeong, J., Kim, J. H., Shim, J. H., Hwang, N. S., & Heo, C. Y. (2019) · Biomaterials Research · doi:10.1186/s40824-018-0149-3 · Cited by 1,054
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,027
Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing
Kim, S. H., Yeon, Y. K., Lee, J. M., Chao, J. R., Lee, Y. J., Seo, Y. B., Sultan, M. T., Lee, O. J., Lee, J. S., Yoon, S.-I., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03759-y · Cited by 972
Wu, W., Geng, P., Li, G., Zhao, D., Zhang, H., & Zhao, J. (2015) · Materials · doi:10.3390/ma8095271 · Cited by 881
Scaffolds and cells for tissue regeneration: different scaffold pore sizes—different cell effects
Bružauskaitė, I., Bironaitė, D., Bagdonas, E., & Bernotienė, E. (2016) · Cytotechnology · doi:10.1007/s10616-015-9895-4 · Cited by 797
Additive manufacturing of biomaterials
Bose, S., Ke, D., Sahasrabudhe, H., & Bandyopadhyay, A. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.08.003 · Cited by 738
3D Printing in Pharmaceutical and Medical Applications – Recent Achievements and Challenges
Jamróz, W., Szafraniec, J., Kurek, M., & Jachowicz, R. (2018) · Pharmaceutical Research · doi:10.1007/s11095-018-2454-x · Cited by 707
3D bioprinting of tissues and organs for regenerative medicine
Vijayavenkataraman, S., Yan, W.-C., Lu, W. F., Wang, C.-H., & Fuh, J. Y. H. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.07.004 · Cited by 630
Measurements of the mechanical response of unidirectional 3D-printed PLA
Song, Y., Li, Y., Song, W., Yee, K., Lee, K.-Y., & Tagarielli, V. L. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.03.051 · Cited by 624
Methods of synthesis of hydrogels … A review
Akhtar, M. F., Hanif, M., & Ranjha, N. M. (2016) · Saudi Pharmaceutical Journal · doi:10.1016/j.jsps.2015.03.022 · Cited by 597
Yuan, L., Ding, S., & Wen, C. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2018.12.003 · Cited by 593
Engineering alginate as bioink for bioprinting
Jia, J., Richards, D. J., Pollard, S., Tan, Y., Rodriguez, J., Visconti, R. P., Trusk, T. C., Yost, M. J., Yao, H., Markwald, R. R., et al. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.06.034 · Cited by 549
Vedadghavami, A., Minooei, F., Mohammadi, M. H., Khetani, S., Rezaei Kolahchi, A., Mashayekhan, S., & Sanati-Nezhad, A. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.07.028 · Cited by 540
Novel Biomaterials Used in Medical 3D Printing Techniques
Tappa, K., & Jammalamadaka, U. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9010017 · Cited by 490
Selective laser sintering in biomedical engineering
Mazzoli, A. (2013) · Medical & Biological Engineering & Computing · doi:10.1007/s11517-012-1001-x · Cited by 469
Chan, V., Zorlutuna, P., Jeong, J. H., Kong, H., & Bashir, R. (2010) · Lab on a Chip · doi:10.1039/c004285d · Cited by 468
Current advances and future perspectives of 3D printing natural-derived biopolymers
Liu, J., Sun, L., Xu, W., Wang, Q., Yu, S., & Sun, J. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.11.077 · Cited by 428
Hydrogels: Methods of Preparation, Characterisation and Applications
H. Gulrez, S. K., Al-Assaf, S., & O, G. (2011) · Progress in Molecular and Environmental Bioengineering - From Analysis and Modeling to Technology Applications · doi:10.5772/24553 · Cited by 403
Mechanical behaviour of alginate-gelatin hydrogels for 3D bioprinting
Giuseppe, M. D., Law, N., Webb, B., A. Macrae, R., Liew, L. J., Sercombe, T. B., Dilley, R. J., & Doyle, B. J. (2018) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.12.018 · Cited by 394
Fabrication of soft tissue engineering scaffolds by means of rapid prototyping techniques
Landers, R., Pfister, A., Hübner, U., John, H., Schmelzeisen, R., & Mülhaupt, R. (2002) · Journal of Materials Science · doi:10.1023/a:1016189724389 · Cited by 367
Tan, D. K., Maniruzzaman, M., & Nokhodchi, A. (2018) · Pharmaceutics · doi:10.3390/pharmaceutics10040203 · Cited by 329
Lin, H., & Yeh, Y. (2004) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30065 · Cited by 303
Polyelectrolyte gelatin-chitosan hydrogel optimized for 3D bioprinting in skin tissue engineering
Ng, W. L., Yeong, W. Y., & Naing, M. W. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.2016.01.009 · Cited by 293
On the development and characterisation of crosslinked sodium alginate/gelatine hydrogels
Saarai, A., Kasparkova, V., Sedlacek, T., & Saha, P. (2013) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2012.11.010 · Cited by 285
3D printing for the design and fabrication of polymer-based gradient scaffolds
Bracaglia, L. G., Smith, B. T., Watson, E., Arumugasaamy, N., Mikos, A. G., & Fisher, J. P. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.03.030 · Cited by 251
Chen, Q., Zhu, C., & Thouas, G. A. (2012) · Progress in Biomaterials · doi:10.1186/2194-0517-1-2 · Cited by 240
A new nested ensemble technique for automated diagnosis of breast cancer
Abdar, M., Zomorodi-Moghadam, M., Zhou, X., Gururajan, R., Tao, X., Barua, P. D., & Gururajan, R. (2020) · Pattern Recognition Letters · doi:10.1016/j.patrec.2018.11.004 · Cited by 240
Binder-jetting 3D printing and alloy development of new biodegradable Fe-Mn-Ca/Mg alloys
Hong, D., Chou, D.-T., Velikokhatnyi, O. I., Roy, A., Lee, B., Swink, I., Issaev, I., Kuhn, H. A., & Kumta, P. N. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.08.032 · Cited by 234
3-dimensional bioprinting for tissue engineering applications
Gu, B. K., Choi, D. J., Park, S. J., Kim, M. S., Kang, C. M., & Kim, C.-H. (2016) · Biomaterials Research · doi:10.1186/s40824-016-0058-2 · Cited by 232
Advances in keratinocyte delivery in burn wound care
ter Horst, B., Chouhan, G., Moiemen, N. S., & Grover, L. M. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2017.06.012 · Cited by 222
3D bioprinting of liver-mimetic construct with alginate/cellulose nanocrystal hybrid bioink
Wu, Y., Lin, Z. Y. (., Wenger, A. C., Tam, K. C., & Tang, X. (. (2018) · Bioprinting · doi:10.1016/j.bprint.2017.12.001 · Cited by 207
Detection of abnormal heart conditions based on characteristics of ECG signals
Hammad, M., Maher, A., Wang, K., Jiang, F., & Amrani, M. (2018) · Measurement · doi:10.1016/j.measurement.2018.05.033 · Cited by 190
Parameter optimization for 3D bioprinting of hydrogels
Webb, B., & Doyle, B. J. (2017) · Bioprinting · doi:10.1016/j.bprint.2017.09.001 · Cited by 186
Performance analysis of classification algorithms on early detection of liver disease
Abdar, M., Moghadam, M. Z., Daş, R., & Ting, I. (2016) · Expert Systems with Applications · doi:10.1016/j.eswa.2016.08.065 · Cited by 163
Yeo, M., Lee, J.-S., Chun, W., & Kim, G. H. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.5b01764 · Cited by 159
Liu, A., Xue, G.-H., Sun, M., Shao, H., Ma, C., Gao, Q., Gou, Z., Yan, S., Liu, Y., & He, Y. (2016) · Scientific Reports · doi:10.1038/srep21704 · Cited by 135
Elomaa, L., Pan, C., Shanjani, Y., Malkovskiy, A. V., Seppälä, J. V., & Yang, Y. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb01468a · Cited by 131
Biomaterials and Scaffolds in Reparative Medicine
Chaikof, E. L., Matthew, H. W. T., Kohn, J., Mikos, A. G., Prestwich, G. D., & Yip, C. M. (2002) · Annals of the New York Academy of Sciences · doi:10.1111/j.1749-6632.2002.tb03057.x · Cited by 124
Zhang, J., Vo, A. Q., Feng, X., Bandari, S., & Repka, M. A. (2018) · AAPS PharmSciTech · doi:10.1208/s12249-018-1097-x · Cited by 120
Lamichhane, S., Bashyal, S., Keum, T., Noh, G., Seo, J. E., Bastola, R., Choi, J., Sohn, D. H., & Lee, S. K. (2019) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2018.11.008 · Cited by 115
Reconstruction and Development of a 3D Printer Using FDM Technology
Kun, K. (2016) · Procedia Engineering · doi:10.1016/j.proeng.2016.06.657 · Cited by 103
Selective laser sintering and its application in biomedical engineering
Duan, B., & Wang, M. (2011) · MRS Bulletin · doi:10.1557/mrs.2011.270 · Cited by 97
Hammad, M. A., & Wang, K. (2018) · Computers & Security · doi:10.1016/j.cose.2018.11.003 · Cited by 97
3D Printing with Biomaterials:
van Wijk, A., & Iris, V. W. (2015) · IOS Press eBooks · doi:10.3233/978-1-61499-486-2-i · Cited by 94
Manufacture and Characterisation of Porous PLA Scaffolds
Rodrigues, N., Benning, M., Ferreira, A. M., Dixon, L. I., & Dalgarno, K. W. (2016) · Procedia CIRP · doi:10.1016/j.procir.2015.07.025 · Cited by 88
Neiman, J. A. S., Raman, R., Chan, V., Rhoads, M. G., Raredon, M. S. B., Velazquez, J. J., Dyer, R. L., Bashir, R., Hammond, P. T., & Griffith, L. G. (2014) · Biotechnology and Bioengineering · doi:10.1002/bit.25494 · Cited by 79
Hybrid particle swarm optimization for rule discovery in the diagnosis of coronary artery disease
Moghadam, M. Z., Abdar, M., Davarzani, Z., Zhou, X., Pławiak, P., & Acharya, U. R. (2019) · Expert Systems · doi:10.1111/exsy.12485 · Cited by 77
XiaoHui, S., Wei, L., Song, P., Qing-yong, S., QingSong, W., YuSheng, S., Liu, K., & Wenguang, L. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7135-x · Cited by 75
Shahriari, D., Koffler, J. Y., Lynam, D. A., Tuszynski, M. H., & Sakamoto, J. S. (2015) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35600 · Cited by 68
Possibilities of Preoperative Medical Models Made by 3D Printing or Additive Manufacturing
Salmi, M. (2016) · Journal of Medical Engineering · doi:10.1155/2016/6191526 · Cited by 67
Extrusion-Based 3D Printing for Pharmaceuticals: Contemporary Research and Applications
Algahtani, M. S., Mohammed, A. A., & Ahmad, J. (2019) · Current Pharmaceutical Design · doi:10.2174/1381612825666190110155931 · Cited by 67
Shuai, C., Yang, B. L., Peng, S., & Li, Z. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5001-2 · Cited by 66
Cancelable biometric authentication system based on ECG
Hammad, M. A., Luo, G., & Wang, K. (2018) · Multimedia Tools and Applications · doi:10.1007/s11042-018-6300-2 · Cited by 66
Powder Bed Fusion: The Working Process, Current Applications and Opportunities
Fina, F., Gaisford, S., & Basit, A. W. (2018) · AAPS advances in the pharmaceutical sciences series · doi:10.1007/978-3-319-90755-0_5 · Cited by 65
Very deep feature extraction and fusion for arrhythmias detection
Amrani, M., Hammad, M. A., Jiang, F., Wang, K., & Amrani, A. (2018) · Neural Computing and Applications · doi:10.1007/s00521-018-3616-9 · Cited by 64
Kumaresan, T., Gandhinathan, R., Ramu, M., Ananthasubramanian, M., & Kamarajan, B. P. (2016) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-016-1049-x · Cited by 61
Mohseni, M., Hutmacher, D. W., & Castro, N. J. (2018) · Polymers · doi:10.3390/polym10010040 · Cited by 60
The Shape of Things to Come: Emerging Applications of 3D Printing in Healthcare
Trenfield, S. J., Madla, C. M., Basit, A. W., & Gaisford, S. (2018) · AAPS advances in the pharmaceutical sciences series · doi:10.1007/978-3-319-90755-0_1 · Cited by 57
3D Printing of Poly(3‐hydroxybutyrate) Porous Structures Using Selective Laser Sintering
Pereira, T., de Oliveira, M. F., Maia, I. A., da Silva, J. V. L., da Costa, M. F., & Thiré, R. M. D. S. M. (2012) · Macromolecular Symposia · doi:10.1002/masy.201100237 · Cited by 53
Chohan, J. S., Singh, R., & Boparai, K. S. (2016) · Measurement · doi:10.1016/j.measurement.2016.09.001 · Cited by 52
Development and clinical evaluation of laser-sintered ankle foot orthoses
Deckers, J. P., Vermandel, M., Geldhof, J., Vasiliauskaite, E., Forward, M., & Plasschaert, F. S. (2017) · Plastics Rubber and Composites Macromolecular Engineering · doi:10.1080/14658011.2017.1413760 · Cited by 49
Shumilova, A. A., Прокопьевич, М. М., Кириченко, А. К., Nikolaeva, E. D., Volova, T. G., & Shishatskaya, E. I. (2016) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35933 · Cited by 39
Szymczyk‐Ziółkowska, P., Junka, A., Ziółkowski, G., Smutnicka, D., Bartoszewicz, M., & Chlebus, E. (2013) · PubMed · doi:10.5277/abb130109 · Cited by 38
Self-citationNaghieh, S., Badrossamay, M., Foroozmehr, E., & Kharaziha, M. (2017) · International Journal of Swarm Intelligence and Evolutionary Computation · doi:10.4172/2090-4908.1000150 · Cited by 37
Tai, B. L., Kao, Y.-T., Payne, N., et al. (2018) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2018.08.004 · Cited by 33
Dumitrescu, I.-B. (2018) · FARMACIA · doi:10.31925/farmacia.2018.3.1 · Cited by 31
Paste Extruder—Hardware Add-On for Desktop 3D Printers
Amza, C. G., Zapciu, A., & Popescu, D. (2017) · Technologies · doi:10.3390/technologies5030050 · Cited by 30
Singh, J. P., Pandey, P. M., & Verma, A. K. (2016) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2014-0148 · Cited by 27
Modern noninvasive methods for monitoring glucose levels in patients: a review
Dziergowska, K., Łabowska, M. B., Gąsior‐Głogowska, M., Kmiecik, B., & Detyna, J. D. (2019) · Bio-Algorithms and Med-Systems · doi:10.1515/bams-2019-0052 · Cited by 18
Self-citationKmiecik, B., Łabowska, M. B., & Detyna, J. D. (2019) · Journal of Applied Biomedicine · doi:10.1016/j.bbe.2019.04.001 · Cited by 4
Self-citationStructure and Mechanical Properties of Soft Tissues during Selected Pathological Processes
Kmiecik, B., Skotny, A., & Detyna, J. D. (2017) · Journal of Blood Disorders & Transfusion · doi:10.4172/2327-5146.1000285 · Cited by 3
Self-citation
Cited by
Arif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395
3D printing technology; methods, biomedical applications, future opportunities and trends
Bozkurt, Y., & Karayel, E. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.050 · Cited by 384
Recent advances of additive manufacturing in implant fabrication – A review
Mobarak, M. H., Islam, M. A., Hossain, N., Al Mahmud, M. Z., Rayhan, M. T., Nishi, N. J., & Chowdhury, M. A. (2023) · Applied Surface Science Advances · doi:10.1016/j.apsadv.2023.100462 · Cited by 307
Tshephe, T. S., Akinwamide, S. O., Olevsky, E., & Olubambi, P. A. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e09041 · Cited by 293
Biomedical Application of Decellularized Scaffolds
Zhang, F., Gao, H., Jiang, X., Yang, F., Zhang, J., Song, S., & Shen, J. (2023) · ACS Applied Bio Materials · doi:10.1021/acsabm.3c00778 · Cited by 10
Metadata
- Authors
- Szymczyk-Ziółkowska, P., Łabowska, M. B., Detyna, J., Michalak, I., & Gruber, P.
- Venue
- Biocybernetics and Biomedical Engineering
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 40
- Issue
- 2
- Pages
- 624-638
- ISSN
- 0208-5216 (ISSN-L)
- OpenAlex
- W3007901038
- Cited by
- 266
- References
- 81
- FWCI
- 13.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.