Towards hospital-on-chip supported by 2D MXenes-based 5th generation intelligent biosensors
Open accessThe DOI matches its Crossref record; 127 of the 127 references it cites were found in a registry or an index.
Abstract
Existing public health emergencies due to fatal/infectious diseases such as coronavirus disease (COVID-19) and monkeypox have raised the paradigm of 5th generation portable intelligent and multifunctional biosensors embedded on a single chip. The state-of-the-art 5th generation biosensors are concerned with integrating advanced functional materials with controllable physicochemical attributes and optimal machine processability. In this direction, 2D metal carbides and nitrides (MXenes), owing to their enhanced effective surface area, tunable physicochemical properties, and rich surface functionalities, have shown promising performances in biosensing flatlands. Moreover, their hybridization with diversified nanomaterials caters to their associated challenges for the commercialization of stability due to restacking and oxidation. MXenes and its hybrid biosensors have demonstrated intelligent and lab-on-chip prospects for determining diverse biomarkers/pathogens related to fatal and infectious diseases. Recently, on-site detection has been clubbed with solution-on-chip MXenes by interfacing biosensors with modern-age technologies, including 5G communication, internet-of-medical-things (IoMT), artificial intelligence (AI), and data clouding to progress toward hospital-on-chip (HOC) modules. This review comprehensively summarizes the state-of-the-art MXene fabrication, advancements in physicochemical properties to architect biosensors, and the progress of MXene-based lab-on-chip biosensors toward HOC solutions. Besides, it discusses sustainable aspects, practical challenges and alternative solutions associated with these modules to develop personalized and remote healthcare solutions for every individual in the world.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electric Field Effect in Atomically Thin Carbon Films
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Zhang, Y., Dubonos, S. V., Grigorieva, I. V., & Firsov, A. A. (2004) · Science · doi:10.1126/science.1102896 · Cited by 66,834
Two‐Dimensional Nanocrystals Produced by Exfoliation of Ti3AlC2
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., Hultman, L., Gogotsi, Y., & Barsoum, M. W. (2011) · Advanced Materials · doi:10.1002/adma.201102306 · Cited by 11,855
ELECTRODE SYSTEMS FOR CONTINUOUS MONITORING IN CARDIOVASCULAR SURGERY
Clark, L. C., & Lyons, C. (1962) · Annals of the New York Academy of Sciences · doi:10.1111/j.1749-6632.1962.tb13623.x · Cited by 3,945 · cited 2×
“Clark and Lyons 127 (1962)(Clark and Lyons, 2006) reported the first biosensor to detect glucose based on 128 Jo urn al Pr e-p roo f”
BackgroundWearable biosensors for healthcare monitoring
Kim, J., Campbell, A. S., de Ávila, B. E.-F., & Wang, J. (2019) · Nature Biotechnology · doi:10.1038/s41587-019-0045-y · Cited by 3,373 · cited 4×
“However, in order to improve detection efficacy, simplify operation, and advance diagnostic quality, the 2 nd generation of biosensors was introduced with a modified monitoring technique (Ansari and Malhotra, 2022; Kim et al., 2019; Xin Fig.”
InfluentialNovel Electronic and Magnetic Properties of Two‐Dimensional Transition Metal Carbides and Nitrides
Khazaei, M., Arai, M., Sasaki, T., Chung, C., Venkataramanan, N. S., Estili, M., Sakka, Y., & Kawazoe, Y. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202502 · Cited by 1,998 · cited 1×
“For example, to envision the exfoliating and etching prospects of 82 MAX precursors, the static-exfoliation energies were predicted using force constants (Khazaei et al., 2013).”
Oxidation Stability of Colloidal Two-Dimensional Titanium Carbides (MXenes)
Zhang, C. J., Pinilla, S., McEvoy, N., Cullen, C. P., Anasori, B., Long, E., Park, S.-H., Seral-Ascaso, A., Shmeliov, A., Krishnan, D., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00745 · Cited by 1,725
6G Internet of Things: A Comprehensive Survey
Nguyen, D. C., Ding, M., Pathirana, P. N., Seneviratne, A., Li, J., Niyato, D., Dobre, O., & Poor, H. V. (2022) · IEEE Internet of Things Journal · doi:10.1109/jiot.2021.3103320 · Cited by 1,452
Alzheimer’s disease: pathogenesis, diagnostics, and therapeutics
Tiwari, S., Atluri, V., Kaushik, A., Yndart, A., & Nair, M. (2019) · International Journal of Nanomedicine · doi:10.2147/ijn.s200490 · Cited by 1,308
Self-citationTen Years of Progress in the Synthesis and Development of MXenes
Naguib, M., Barsoum, M. W., & Gogotsi, Y. (2021) · Advanced Materials · doi:10.1002/adma.202103393 · Cited by 1,257 · cited 10×
“…HF, LiF and HCl mixture, fluorine-incorporated liquefied salt, and fluoride salts), non-fluorinated etching, such as electrochemistry and alkaline rich hydrothermal etching process, and non-aqueous liquid phased etching method employing Lewis acidic salts (Jiang et al., 2020; Naguib et al., 2021).”
InfluentialAdvances in the Synthesis of 2D MXenes
Wei, Y., Zhang, P., Soomro, R. A., Zhu, Q., & Xu, B. (2021) · Advanced Materials · doi:10.1002/adma.202103148 · Cited by 1,216 · cited 9×
“In this section, the strategies evolved to produce diversified MXenes utilizing selective etching have been reviewed comprehensively (Jiang et al., 2020; Naguib et al., 2021; Wei et al., 2021).”
InfluentialMXene and MXene-based composites: synthesis, properties and environment-related applications
Zhan, X., Si, C., Zhou, J., & Sun, Z. (2020) · Nanoscale Horizons · doi:10.1039/c9nh00571d · Cited by 1,135 · cited 2×
“Also, designing MXene complex structures using carbon substances or macro-compounds or dispersing in ionic salted liquids have been proven strategies for an efficient antioxidant MXene (Chaudhary et al., 2021a; Du et al., 2021; Iqbal et al., 2021; Wu et al., 2017; Zhan et al., 2020).”
BackgroundMethodElastic properties of 2D Ti 3 C 2 T x MXene monolayers and bilayers
Lipatov, A., Lu, H., Alhabeb, M., Anasori, B., Gruverman, A., Gogotsi, Y., & Sinitskii, A. (2018) · Science Advances · doi:10.1126/sciadv.aat0491 · Cited by 1,064
Graphene-based wireless bacteria detection on tooth enamel
Mannoor, M. S., Tao, H., Clayton, J. D., Sengupta, A., Kaplan, D. L., Naik, R. R., Verma, N., Omenetto, F. G., & McAlpine, M. C. (2012) · Nature Communications · doi:10.1038/ncomms1767 · Cited by 1,014
Highly Conductive Optical Quality Solution‐Processed Films of 2D Titanium Carbide
Dillon, A. D., Ghidiu, M. J., Krick, A. L., Griggs, J., May, S. J., Gogotsi, Y., Barsoum, M. W., & Fafarman, A. T. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600357 · Cited by 988
Photoluminescent Ti3C2 MXene Quantum Dots for Multicolor Cellular Imaging
Xue, Q., Zhang, H., Zhu, M., Pei, Z., Li, H., Wang, Z., Huang, Y., Huang, Y., Deng, Q., Zhou, J., et al. (2017) · Advanced Materials · doi:10.1002/adma.201604847 · Cited by 980 · cited 3×
“Xue et al. (2017) performed multicolor RAW264.”
Scalable Manufacturing of Free‐Standing, Strong Ti3C2Tx MXene Films with Outstanding Conductivity
Zhang, J., Kong, N., Uzun, S., Levitt, A., Seyedin, S., Lynch, P. A., Qin, S., Han, M., Yang, W., Liu, J., et al. (2020) · Advanced Materials · doi:10.1002/adma.202001093 · Cited by 972
Jiang, X., Kuklin, A. V., Baev, A., Ge, Y., Ågren, H., Zhang, H., & Prasad, P. N. (2020) · Physics Reports · doi:10.1016/j.physrep.2019.12.006 · Cited by 914 · cited 10×
“…HF, LiF and HCl mixture, fluorine-incorporated liquefied salt, and fluoride salts), non-fluorinated etching, such as electrochemistry and alkaline rich hydrothermal etching process, and non-aqueous liquid phased etching method employing Lewis acidic salts (Jiang et al., 2020; Naguib et al., 2021).”
InfluentialScalable Synthesis of Ti3C2Tx MXene
Shuck, C. E., Sarycheva, A., Anayee, M., Levitt, A., Zhu, Y., Uzun, S., Balitskiy, V., Zahorodna, V., Gogotsi, O., & Gogotsi, Y. (2020) · Advanced Engineering Materials · doi:10.1002/adem.201901241 · Cited by 868
Wu, X., Wang, Z., Yu, M., Xiu, L., & Qiu, J. (2017) · Advanced Materials · doi:10.1002/adma.201607017 · Cited by 800 · cited 2×
“Also, designing MXene complex structures using carbon substances or macro-compounds or dispersing in ionic salted liquids have been proven strategies for an efficient antioxidant MXene (Chaudhary et al., 2021a; Du et al., 2021; Iqbal et al., 2021; Wu et al., 2017; Zhan et al., 2020).”
MethodAntioxidants Unlock Shelf-Stable Ti3C2T (MXene) Nanosheet Dispersions
Zhao, X., Vashisth, A., Prehn, E., Sun, W., Shah, S. A., Habib, T., Chen, Y., Tan, Z., Lutkenhaus, J. L., Radovic, M., et al. (2019) · Matter · doi:10.1016/j.matt.2019.05.020 · Cited by 747
Wearable salivary uric acid mouthguard biosensor with integrated wireless electronics
Kim, J., Imani, S., de Araujo, W. R., Warchall, J., Valdés-Ramírez, G., Paixão, T. R. L. C., Mercier, P. P., & Wang, J. (2015) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2015.07.039 · Cited by 678
Nanostructured metal oxide-based biosensors
Solanki, P. R., Kaushik, A., Agrawal, V. V., & Malhotra, B. D. (2011) · NPG Asia Materials · doi:10.1038/asiamat.2010.137 · Cited by 663 · cited 5×
“Therefore, researchers are now implementing intelligent 5 th generation biosensors to protect precious life from these dangerous diseases (Lei et al., 2019; Li et al., 2022; Novoselov et al., 2004; Pan et al., 2022; Patel et al., 2016; Solanki et al., 2011; Verma and Bhardwaj, 2015).”
InfluentialSelf-citationXie, Y., & Kent, P. R. C. (2013) · Physical Review B · doi:10.1103/physrevb.87.235441 · Cited by 630 · cited 1×
“This curtails the V. Chaudhary et al. Biosensors and Bioelectronics 220 (2023) 114847 electrical conductance of the material due to decreased charge transport density (Jiang et al., 2020; Xie and Kent, 2013).”
BackgroundOrganic–Inorganic Hybrid Nanocomposite-Based Gas Sensors for Environmental Monitoring
Kaushik, A., Kumar, R., Arya, S. K., Nair, M., Malhotra, B. D., & Bhansali, S. (2015) · Chemical Reviews · doi:10.1021/cr400659h · Cited by 534
Self-citationImproving oxidation stability of 2D MXenes: synthesis, storage media, and conditions
Iqbal, A., Hong, J., Ko, T. Y., & Koo, C. M. (2021) · Nano Convergence · doi:10.1186/s40580-021-00259-6 · Cited by 534 · cited 2×
“…may result in the loss of MXene’s unique properties, including electrical and thermal conductance, hydrophilic nature, and increased V. Chaudhary et al. Biosensors and Bioelectronics 220 (2023) 114847 pseudo-capacitance, adversely affecting the projected sensor performance (Iqbal et al., 2021).”
BackgroundMethodMani, V., Chikkaveeraiah, B. V., Patel, V., Gutkind, J. S., & Rusling, J. F. (2009) · ACS Nano · doi:10.1021/nn800863w · Cited by 532
2D Metal Carbides and Nitrides (MXenes): Structure, Properties and Applications
(2019) · Springer eBooks · doi:10.1007/978-3-030-19026-2 · Cited by 496
Sensing with MXenes: Progress and Prospects
Ho, D. H., Choi, Y. Y., Jo, S. B., Myoung, J., & Cho, J. H. (2021) · Advanced Materials · doi:10.1002/adma.202005846 · Cited by 482 · cited 4×
“Due to this, DNA array can be detected more than a million times rapid genome arrangement (Chakraborty et al., 2018; Dwivedi et al., 2021; Ho et al., 2021; Lei et al., 2019; Naguib et al., 2021; Novoselov et al., 2004; Patel et al., 2016; Solanki et al., 2011; Wu et al., 2022; Zhang et al., 2022).”
InfluentialA MXene‐Based Wearable Biosensor System for High‐Performance In Vitro Perspiration Analysis
Lei, Y., Zhao, W., Zhang, Y., Jiang, Q., He, J., Baeumner, A. J., Wolfbeis, O. S., Wang, Z. L., Salama, K. N., & Alshareef, H. N. (2019) · Small · doi:10.1002/smll.201901190 · Cited by 441
A review on environmental gas sensors: Materials and technologies
Dhall, S., Mehta, B. R., Tyagi, A. K., & Sood, K. (2021) · Sensors International · doi:10.1016/j.sintl.2021.100116 · Cited by 439 · cited 2×
“However, by designing and developing hybrids/nanocomposites 464 with other substances, various challenges associated with particular 2D materials can be 465 addressed further(Chaudhary et al., 2021a; Dhall et al., 2021; Hashtroudi et al., 2020).”
BackgroundMaterial aspects of triboelectric energy generation and sensors
Kim, D. W., Lee, J. H., Kim, J. K., & Jeong, U. (2020) · NPG Asia Materials · doi:10.1038/s41427-019-0176-0 · Cited by 428 · cited 1×
“…biosensors and the fundamentals of green chemistry(Batra et al., 2022; Chaudhary, 2022) to address ecological concerns resulting in repurpose, reuse, degradable, recyclable biosensors, addressed under 5th generation of biosensors (Chaudhary et al., 2022c; Kim et al., 2020; Pathania et al., 2022).”
BackgroundHigh‐performance flexible sensing devices based on polyaniline/MXene nanocomposites
Zhao, L., Wang, K., Wei, W., Wang, L., & Han, W. (2019) · InfoMat · doi:10.1002/inf2.12032 · Cited by 420 · cited 8×
“The stumbling blocks in scalable manufacturing of MXene are controlling reactor capacity, persistent transfer and homogenous blending of precursors, regulating thermal reactions and preserving safety considerations, and achieving optimal reaction parameters to attain required physicochemical attributes (Naguib et al.,…”
BackgroundMethodInfluentialChemical Sensors Based on Fiber Optics
Seitz, W. R. (1984) · Analytical Chemistry · doi:10.1021/ac00265a001 · Cited by 417 · cited 1×
“…from 1 st generation to 5 th generation with prospects of 6 th generation modules; subparts adapted from: Glucose biosensor ((Clark and Lyons, 2006)), Immunosensor ((Mani et al., 2009)), Optical biosensor ((Seitz, 1984)), Lab-on-chip ((Kukhtin et al., 2019)), Hospital-on-chip ((Yang et al., 2021)).”
Abdolhosseinzadeh, S., Schneider, R., Verma, A., Heier, J., Nüesch, F., & Zhang, C. (. (2020) · Advanced Materials · doi:10.1002/adma.202000716 · Cited by 406
An investigation into the factors governing the oxidation of two-dimensional Ti3C2MXene
Chae, Y., Kim, S. J., Cho, S.-Y., Choi, J., Maleski, K., Lee, B.-J., Jung, H.-T., Gogotsi, Y., Lee, Y., & Ahn, C. W. (2019) · Nanoscale · doi:10.1039/c9nr00084d · Cited by 403 · cited 1×
“…range to avoid nucleation propagation, preservation of MXene in organic or inorganic dispersions, cease edge atoms through absorption of anionic salts, and treat MXene with reduction gases (Chae et al., 2019; Lee et al., 2020; Natu et al., 2019; Zhang et al., 2017; Zhao et al., 2019).”
Artificial intelligence biosensors: Challenges and prospects
Jin, X., Liu, C., Xu, T., Su, L., & Zhang, X. (2020) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2020.112412 · Cited by 399 · cited 2×
“…artificial intelligence (AI), bioinformatics, data clouding and 5G communications in biomedical sectors have transformed the LOC module biosensors into 5th generation biosensors with smart, remote and intelligent prospects (Jin et al., 2020; Kim et al., 2019; Singh et al., 2021; Xin et al., 2020).”
BackgroundTransition metal carbides go 2D
Gogotsi, Y. (2015) · Nature Materials · doi:10.1038/nmat4386 · Cited by 394 · cited 2×
“…et al., 2018; Chaudhary et al., 2022c; Ho et al., 2021; Jiang et al., 2020; Naguib et al., 2021; Wei et al., 2021 Chaudhary et al. et al. (Gogotsi, 2015) reported the bi-layer substrate of copper, which was reduced onto molybdenum foil having a size of ~100 μ m to form molybdenum carbide…”
Chaudhary, V., Kaushik, A., Furukawa, H., & Khosla, A. (2022) · ECS Sensors Plus · doi:10.1149/2754-2726/ac5ac6 · Cited by 386 · cited 6×
“Optimizing the material ’ s unique physicochemical attributes is the key to obtaining outstanding quality and fulfilling industrial material demands for the targeted application (Chaudhary, 2021a, 2022; Chaudhary et al., 2017, 2022a; Chaudhary and Chavali, 2021; Chaudhary and Kaur, 2015).”
InfluentialSelf-citationNatu, V., Hart, J. L., Sokol, M., Chiang, H., Taheri, M. L., & Barsoum, M. W. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201906138 · Cited by 379 · cited 1×
“…range to avoid nucleation propagation, preservation of MXene in organic or inorganic dispersions, cease edge atoms through absorption of anionic salts, and treat MXene with reduction gases (Chae et al., 2019; Lee et al., 2020; Natu et al., 2019; Zhang et al., 2017; Zhao et al., 2019).”
Borysiuk, V. N., Mochalin, V. N., & Gogotsi, Y. (2015) · Nanotechnology · doi:10.1088/0957-4484/26/26/265705 · Cited by 371
Recent Advances in Functional 2D MXene‐Based Nanostructures for Next‐Generation Devices
Huang, W., Hu, L., Tang, Y., Xie, Z., & Zhang, H. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202005223 · Cited by 359
Oxidation-resistant titanium carbide MXene films
Lee, Y., Kim, S. J., Kim, Y.-J., Lim, Y., Chae, Y., Lee, B.-J., Kim, Y.-T., Han, H., Gogotsi, Y., & Ahn, C. W. (2020) · Journal of Materials Chemistry A · doi:10.1039/c9ta07036b · Cited by 357
Zhou, T., & Zhang, T. (2021) · Small Methods · doi:10.1002/smtd.202100515 · Cited by 350 · cited 2×
“…area and rapid charge transfer systems, one-dimensional (1D) nanomaterials, such as carbon nanotubes (CNTs), metal nanowires, and macromolecule nanofibers, have lately surpassed the obstacles related to typical biosensors based on bulk materials (Ansari and Malhotra, 2022; Zhou and Zhang, 2021).”
BackgroundZhang, H., Wang, Z., Zhang, Q., Wang, F., & Liu, Y. (2019) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2018.10.016 · Cited by 331 · cited 30×
“The first concern related to 5th generation biosensors is catered by V. Chaudhary et al. Biosensors and Bioelectronics 220 (2023) 114847 architecting advanced functional nanoplatforms and engineering their physicochemical attributes.”
BackgroundInfluentialRatiometric photoluminescence sensing based on Ti3C2MXene quantum dots as an intracellular pH sensor
Chen, X., Sun, X., Xu, W., Pan, G., Zhou, D., Zhu, J., Wang, H., Bai, X., Dong, B., & Song, H. (2018) · Nanoscale · doi:10.1039/c7nr06958h · Cited by 316
Large-gap two-dimensional topological insulator in oxygen functionalized MXene
Weng, H., Ranjbar, A., Liang, Y., Song, Z., Khazaei, M., Yunoki, S., Arai, M., Kawazoe, Y., Fang, Z., & Dai, X. (2015) · Physical Review B · doi:10.1103/physrevb.92.075436 · Cited by 314
Zhang, Y., Jiang, X., Zhang, J., Zhang, H., & Li, Y. (2019) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2019.01.043 · Cited by 289
Biosensor Technology for Pesticides—A review
Verma, N., & Bhardwaj, A. (2015) · Applied Biochemistry and Biotechnology · doi:10.1007/s12010-015-1489-2 · Cited by 284 · cited 4×
“These biosensor technologies are based on nanomaterials as biological sensing components integrated with internet-of-things (IoTs) and rapid data processing modules within a transducer arrangement (Kaushik et al., 2018; Patel et al., 2016; Verma and Bhardwaj, 2015).”
Influential2D metal carbides and nitrides (MXenes) for sensors and biosensors
Alwarappan, S., Nesakumar, N., Sun, D., Hu, T. Y., & Li, C.-Z. (2022) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2021.113943 · Cited by 262
Self-citationDevelopment of Point-of-Care Biosensors for COVID-19
Choi, J. R. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00517 · Cited by 250 · cited 8×
“Different types of point-of-care LOC biosensors for detecting SARS-CoV-2 (Choi, 2020).”
InfluentialLashgari, H., Abolhassani, M. R., Boochani, A., Elahi, S. M., & Khodadadi, J. (2014) · Solid State Communications · doi:10.1016/j.ssc.2014.06.008 · Cited by 249 · cited 2×
“DFT analysis revealed that most of the MXenes types, including Ti n + 1 X n , exhibit metallic properties because of the considerable overlap of the valence band and electrical conduction bands at the Fermi energy (Lashgari et al., 2014).”
MXenes and Their Applications in Wearable Sensors
Xin, M., Li, J., Ma, Z., Pan, L., & Shi, Y. (2020) · Frontiers in Chemistry · doi:10.3389/fchem.2020.00297 · Cited by 246 · cited 3×
“Furthermore, the incorporation of triboelectric nanogenerators in MXenes has already initiated the transformation of wearable electronic devices with sensor integration (Lei et al., 2020; S. Li et al., 2020; Tan et al., 2020; Xin et al., 2020).”
Internet of things (IoT) in nano-integrated wearable biosensor devices for healthcare applications
Verma, D., Singh, K. R., Yadav, A. K., Nayak, V., Singh, J., Solanki, P. R., & Singh, R. P. (2022) · Biosensors and Bioelectronics: X · doi:10.1016/j.biosx.2022.100153 · Cited by 246
Self-citationPhysical sensors for skin‐inspired electronics
Li, S., Zhang, Y., Wang, Y., Xia, K., Yin, Z., Wang, H., Zhang, M., Liang, X., Lu, H., Zhu, M., et al. (2020) · InfoMat · doi:10.1002/inf2.12060 · Cited by 245 · cited 1×
“Furthermore, the incorporation of triboelectric nanogenerators in MXenes has already initiated the transformation of wearable electronic devices with sensor integration (Lei et al., 2020; S. Li et al., 2020; Tan et al., 2020; Xin et al., 2020).”
Large-Gap Quantum Spin Hall State in MXenes: d-Band Topological Order in a Triangular Lattice
Si, C., Jin, K.-H., Zhou, J., Sun, Z., & Liu, F. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b03118 · Cited by 244
Li, X., Xu, J., Jiang, Y., He, Z., Liu, B., Xie, H., Li, H., Li, Z., Wang, Y., & Tai, H. (2020) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2020.128144 · Cited by 243
Three-dimensional porous MXene/NiCo-LDH composite for high performance non-enzymatic glucose sensor
Li, M., Fang, L., Zhou, H., Wu, F., Lu, Y., Luo, H., Zhang, Y., & Hu, B. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.143554 · Cited by 231 · cited 4×
“…response with the byproducts of the enzyme-analyte active engagement rather than directly reacting with the analytic substance (Kim et al., 2015; M. Li et al., 2019; Lin et al., 2020; Neampet et al., 2019; Rasheed et al., 2019; Wang et al., 2019) For instance, MXene/CNT/Prussian blue (PB)…”
InfluentialKaushik, A. K., Dhau, J. S., Gohel, H., Mishra, Y. K., Kateb, B., Kim, N.-Y., & Goswami, D. Y. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c01004 · Cited by 222
Self-citationHighly fluorescent Ti3C2 MXene quantum dots for macrophage labeling and Cu2+ ion sensing
Guan, Q., Ma, J., Yang, W., Zhang, R., Zhang, X., Dong, X., Fan, Y., Cai, L., Cao, Y., Zhang, Y., et al. (2019) · Nanoscale · doi:10.1039/c9nr04421c · Cited by 219
i‐MXenes for Energy Storage and Catalysis
Ahmed, B., Ghazaly, A. E., & Rosen, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000894 · Cited by 216 · cited 1×
“…borophene, due to their high specific surface area have emerged as excellent biosensing platforms with enhanced detection and monitoring efficacies (Ahmed et al., 2020; Chakraborty et al., 2018; Chaudhary et al., 2022e, 2022a; Dwivedi et al., 2021; Ho et al., 2021; Huang et al., 2020; Jiang et…”
BackgroundWang, H., Li, H., Huang, Y., Xiong, M., Wang, F., & Li, C. (2019) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2019.111531 · Cited by 214 · cited 2×
“For example, Ti3C2Tx hybrid nanosheets immobilized tetrahedral DNA structures were used to monitor mycotoxin using a gliotoxin aptamer with a sensing range between 5 pM and 10 pM and LOD of 5 pM (Wang et al., 2019).”
MethodSelf-citationWang, S., Liu, B., Duan, Z., Zhao, Q., Zhang, Y., Xie, G., Jiang, Y., Li, S., & Tai, H. (2021) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2020.128923 · Cited by 196
Third-Generation Biosensors Based on the Direct Electron Transfer of Proteins
Zhang, W., & Li, G. (2004) · Analytical Sciences · doi:10.2116/analsci.20.603 · Cited by 192 · cited 2×
“It further recognized the different types 151 of biosensors classified based on transducing mechanisms into electrochemical, optical and 152 thermal biosensors (Kim et al., 2019; ZHANG and LI, 2004)s.”
BackgroundGraphene-enabled wearable sensors for healthcare monitoring
Zhang, H., He, R., Niu, Y., Han, F., Li, J., Zhang, X., & Xu, F. (2022) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2021.113777 · Cited by 184 · cited 5×
“Also, Zhang et al. (W. Zhang et al., 2022) revealed an intriguing biodegradable multipurpose pressure sensor developed using cross-attached collagen fibres (CCFs) with MXene aerogel exhibiting a great sensitivity response of 61.99 kPa− 1 within a short time of 0.30s, speedy recovery within few…”
BackgroundMethodInfluentialA rapid, accurate, scalable, and portable testing system for COVID-19 diagnosis
Xun, G., Lane, S. T., Petrov, V. A., Pepa, B. E., & Zhao, H. (2021) · Nature Communications · doi:10.1038/s41467-021-23185-x · Cited by 180 · cited 2×
“Guanhua et al. (Xun et al., 2021) reported the fabrication of the most accessible and most scalable testing system for COVID-19 detection, which includes the rapid, entirely accurate and sensitive assay likely to battery-based portable powdered devices.”
BackgroundMethodEfficient dye degradation strategies using green synthesized ZnO-based nanoplatforms: A review
Batra, V., Kaur, I., Pathania, D., Sonu, & Chaudhary, V. (2022) · Applied Surface Science Advances · doi:10.1016/j.apsadv.2022.100314 · Cited by 177
Self-citationShahzad, F., Iqbal, A., Zaidi, S. A., Hwang, S.-W., & Koo, C. M. (2019) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2019.03.061 · Cited by 168 · cited 3×
“…charged biomolecules, had been expected as attractive electrochemical biosensing receptors as well as transducers (Chaudhary et al., 2022e, 2022c; Shahzad et al., 2019; Sheth et al., 2022; Wu et al., V. Chaudhary et al. Biosensors and Bioelectronics 220 (2023) 114847 Dual-target…”
BackgroundInfluentialMXene–Graphene Field-Effect Transistor Sensing of Influenza Virus and SARS-CoV-2
Li, Y., Peng, Z., Holl, N. J., Hassan, M. R., Pappas, J. M., Wei, C., Izadi, O. H., Wang, Y., Dong, X., Wang, C., et al. (2021) · ACS Omega · doi:10.1021/acsomega.0c05421 · Cited by 167 · cited 7×
“In contrast, Li et al. (Li et al., 2020) and Wang et al. (Wang et al., 2021a, 2021b) both groups successfully adopted the flexible Pl substrate surfaces to design flexible MXene-polymer hybrid gas sensing devices.”
BackgroundMethodInfluentialChaudhary, V., Ashraf, N., Khalid, M., Walvekar, R., Yang, Y., Kaushik, A., & Mishra, Y. K. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202112913 · Cited by 161 · cited 6×
“Optimizing the material ’ s unique physicochemical attributes is the key to obtaining outstanding quality and fulfilling industrial material demands for the targeted application (Chaudhary, 2021a, 2022; Chaudhary et al., 2017, 2022a; Chaudhary and Chavali, 2021; Chaudhary and Kaur, 2015).”
InfluentialSelf-citationPreparation and Application of 2D MXene-Based Gas Sensors: A Review
Li, Q., Li, Y., & Zeng, W. (2021) · Chemosensors · doi:10.3390/chemosensors9080225 · Cited by 151 · cited 1×
“While etching process without fluorine eliminates fluorine surface functions from MXenes (Khaledialidusti et al., 2020; Q. Li et al., 2021).”
Wang, S., Jiang, Y., Liu, B., Duan, Z., Pan, H. L., Yuan, Z., Xie, G., Wang, J., Fang, Z., & Tai, H. (2021) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2021.130069 · Cited by 148
6G Communication Technology: A Vision on Intelligent Healthcare
Nayak, S., & Patgiri, R. (2021) · Studies in Computational Intelligence · doi:10.1007/978-981-15-9735-0_1 · Cited by 143 · cited 1×
“Additionally, the world is shifting towards 6G-IoT networks of ultra-reliable and low latency communications (URLLC) and enhanced mobile broadband (eMBB) at a significant pace (Nayak et al., 2020; Nguyen et al., 2022).”
BackgroundLi, Y., Kang, Z., Kong, L., Shi, H., Zhang, Y., Cui, M., & Yang, D. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.110000 · Cited by 141
2D MXenes with antiviral and immunomodulatory properties: A pilot study against SARS-CoV-2
Ünal, M. A., Bayrakdar, F., Fusco, L., Beşbinar, Ö., Shuck, C. E., Yalçın, S., Erken, M. T., Özkul, A., Gürcan, C., Panatli, O., et al. (2021) · Nano Today · doi:10.1016/j.nantod.2021.101136 · Cited by 140
Rasheed, P. A., Pandey, R. P., Jabbar, K. A., Ponraj, J., & Mahmoud, K. A. (2019) · Analytical Methods · doi:10.1039/c9ay00912d · Cited by 140
Applications of smartphone-based colorimetric biosensors
Qian, S., Cui, Y. G., Cai, Z., & Li, L. (2022) · Biosensors and Bioelectronics X · doi:10.1016/j.biosx.2022.100173 · Cited by 132
Scalable Manufacturing of Large and Flexible Sheets of MXene/Graphene Heterostructures
Zhao, M., Trainor, N., Ren, C. E., Torelli, M., Anasori, B., & Gogotsi, Y. G. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800639 · Cited by 131 · cited 8×
“The stumbling blocks in scalable manufacturing of MXene are controlling reactor capacity, persistent transfer and homogenous blending of precursors, regulating thermal reactions and preserving safety considerations, and achieving optimal reaction parameters to attain required physicochemical attributes (Naguib et al.,…”
BackgroundMethodInfluentialFang, D., Zhao, D., Zhang, S., Huang, Y., Dai, H., & Lin, Y. (2019) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2019.127544 · Cited by 130 · cited 1×
“Also, Fang et al. (2020) described MXene/tris (4,4′-dicarboxyl-2, 2′-bipyridine) ruthenium (II) ion (Ru (dcbpy)32+) (an organic dye)/black phosphorus-based exosome QD sensor having LOD of about 37 particles/μL.”
BackgroundSheth, Y., Dharaskar, S. A., Chaudhary, V., Khalid, M., & Walvekar, R. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2022.133563 · Cited by 123 · cited 1×
“…had been expected as attractive electrochemical biosensing receptors as well as transducers (Chaudhary et al., 2022e, 2022c; Shahzad et al., 2019 ; Sheth et al. , In general, for biosensing applications, 2D materials can be easily functionalized with the polymer chain via non-covalent - π - π…”
Self-citationNeampet, S., Ruecha, N., Qin, J., Wonsawat, W., Chailapakul, O., & Rodthongkum, N. (2019) · Microchimica Acta · doi:10.1007/s00604-019-3845-3 · Cited by 120 · cited 3×
“…enzyme-analyte active engagement rather than directly reacting with the analytic substance (Kim et al., 2015; M. Li et al., 2019; Lin et al., 2020; Neampet et al., 2019; Rasheed et al., 2019; Wang et al., 2019) For instance, MXene/CNT/Prussian blue (PB) nanocomposite was used to design ECL…”
MethodInfluentialKhaledialidusti, R., Mishra, A. K., & Barnoush, A. (2020) · Journal of Materials Chemistry C · doi:10.1039/c9tc06046d · Cited by 119 · cited 1×
“While etching process without fluorine eliminates fluorine surface functions from MXenes (Khaledialidusti et al., 2020; Q. Li et al., 2021).”
Li, H., Wen, Y., Zhu, X., Wang, J., Zhang, L., & Sun, B. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b05987 · Cited by 119 · cited 3×
“Similarly, GSH was also measured through a calorimetric detector fabricated using MXene/NiFe nanoflake composite ( Li et al., 2020).”
Ansari, A. A., & Malhotra, B. D. (2021) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2021.214282 · Cited by 117 · cited 6×
“…along with the ability to maintain physicochemical as well as electrical behavior along with rich surface functionalities, clearly making them highly intriguing for designing biosensing instruments (Ansari and Malhotra, 2022; Chaudhary et al., 2022d; Khunger et al., 2021; Zhou and Zhang, 2021).”
BackgroundMethodInfluentialScott, A., Pandey, R., Saxena, S., Osman, E., Li, Y., & Soleymani, L. (2022) · ECS Sensors Plus · doi:10.1149/2754-2726/ac5fb3 · Cited by 115 · cited 1×
“OH on MXenes leads to optical band gap modulation (Chakraborty et al., 2018; Jiang et al., 2020; Scott et al., 2022).”
Wang, L., Zhang, M., Yang, B., Tan, J., Ding, X., & Li, W. (2021) · Small Methods · doi:10.1002/smtd.202100409 · Cited by 113 · cited 1×
“…such as hydrophilicity, flexibility, high mechanical durability, adjustable band gaps, rich surface chemistries, and huge active surface area (Wang et al., 2021; Weng et al., 2015) This makes MXenes a highly suitable material for designing next-generation sensors exhibiting excellent…”
Zhang, S., Huang, P., Wang, J., Zhuang, Z., Zhang, Z., & Han, W. (2020) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.9b03682 · Cited by 111 · cited 1×
“Furthermore, Zhang et al. (S. J. Zhang et al., 2020) described a novel method to use an ammonium ion to address the problems related to the adhesion and reassembly of few-layer MXenes on a vast scale.”
A Paradigm of Internet-of-Nano-Things Inspired Intelligent Plant Pathogen-Diagnostic Biosensors
Sonu, S., & Chaudhary, V. (2022) · ECS Sensors Plus · doi:10.1149/2754-2726/ac92ed · Cited by 107 · cited 2×
“For instance, farming based on intelligent sensors can be powered by sustainable solar energy via rapidly recharging solar panels (Sonu and Chaudhary, 2022).”
Self-citationDwivedi, N., Dhand, C., Kumar, P., & Srivastava, A. K. (2021) · Materials Advances · doi:10.1039/d1ma00003a · Cited by 104 · cited 4×
“The 2D substances are usually thin atomic mono-layers of 5–10 nm thickness or a few numbers of thin layers coupled by van-der Waals (vdW) interactions (Dwivedi et al., 2021).”
BackgroundInfluentialScheller, F. W., Schubert, F., Neumann, B., Pfeiffer, D., Hintsche, R., Dransfeld, I., Wollenberger, U., Renneberg, R., Warsinke, A., Johansson, G., et al. (1991) · Biosensors and Bioelectronics · doi:10.1016/0956-5663(91)80010-u · Cited by 104
Delaminated Ti3C2Tx (MXene) for electrochemical carbendazim sensing
Wu, D., Wu, M., Yang, J., Zhang, H., Xie, K., Lin, C., Yu, A., Yu, J., & Fu, L. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.10.150 · Cited by 102
Aghamohammadi, H., Amousa, N., & Eslami‐Farsani, R. (2021) · Synthetic Metals · doi:10.1016/j.synthmet.2020.116695 · Cited by 102 · cited 1×
“Consequently, numerous bottom-up techniques for MXene production have been explored, including atomic layer deposition, chemical vapor deposition, and plasma-enhanced pulsed laser deposition (PEPLD) (Aghamohammadi et al., 2021; Naguib et al., 2021; Wei et al., 2021).”
MethodMi, X., Li, H., Tan, R., Feng, B., & Tu, Y. (2021) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2021.113482 · Cited by 89 · cited 2×
“(Mi et al., 2021) explored the 912 use of a tetrahedral DNA/aptamer cardiac troponin-I biosensor based on an in-situ 913 hybridised chain reaction on an Au/Ti3C2-MXene substrate.”
Sensing gastric cancer exosomes with MoS2-based SERS aptasensor
Pan, H., Dong, Y., Gong, L., Zhai, J., Song, C., Ge, Z., Su, Y., Zhu, D., Chao, J., Su, S., et al. (2022) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2022.114553 · Cited by 88
Emerging MXene–Polymer Hybrid Nanocomposites for High-Performance Ammonia Sensing and Monitoring
Chaudhary, V., Gautam, A., Mishra, Y. K., & Kaushik, A. (2021) · Nanomaterials · doi:10.3390/nano11102496 · Cited by 87
Self-citationRecent Advanced on the MXene–Organic Hybrids: Design, Synthesis, and Their Applications
Du, C., Zhao, X., Wang, Z., Yu, H. W., & Ye, Q. (2021) · Nanomaterials · doi:10.3390/nano11010166 · Cited by 87 · cited 2×
“Also, designing MXene complex structures using carbon substances or macro-compounds or dispersing in ionic salted liquids have been proven strategies for an efficient antioxidant MXene (Chaudhary et al., 2021a; Du et al., 2021; Iqbal et al., 2021; Wu et al., 2017; Zhan et al., 2020).”
MethodHashtroudi, H., Mackinnon, I. D. R., & Shafiei, M. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc01968b · Cited by 86 · cited 1×
“However, by designing and developing hybrids/nanocomposites with other substances, various challenges associated with particular 2D materials can be addressed further (Chaudhary et al., 2021a; Dhall et al., 2021; Hashtroudi et al., 2020).”
BackgroundPerspective and prospects of 2D MXenes for smart biosensing
Khunger, A., Kaur, N., Mishra, Y. K., Chaudhary, G. R., & Kaushik, A. K. (2021) · Materials Letters · doi:10.1016/j.matlet.2021.130656 · Cited by 85 · cited 4×
“Paper-based and PDMS are the ones broadly used for this fabrication process owing to their cost-effectiveness and time-efficient fabrication process (Khunger et al., 2021).”
BackgroundInfluentialSelf-citationPathania, D., Kumar, S., Thakur, P., Chaudhary, V., Kaushik, A. K., Varma, R. S., Furukawa, H., Sharma, M., & Khosla, A. (2022) · Scientific Reports · doi:10.1038/s41598-022-14984-3 · Cited by 84
Self-citationAdvancements in research and development to combat COVID-19 using nanotechnology
Chaudhary, V., Royal, A., Chavali, M. S., & Yadav, S. K. (2021) · Nanotechnology for Environmental Engineering · doi:10.1007/s41204-021-00102-7 · Cited by 81 · cited 4×
“Also, designing MXene complex structures using carbon substances or macro-compounds or dispersing in ionic salted liquids have been proven strategies for an efficient antioxidant MXene (Chaudhary et al., 2021a; Du et al., 2021; Iqbal et al., 2021; Wu et al., 2017; Zhan et al., 2020).”
BackgroundMethodInfluentialSelf-citationNoh, S., Lee, H., Kim, J., Jang, H., An, J., Park, C., Lee, M., & Lee, T. (2022) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2022.114159 · Cited by 81 · cited 2×
“Nowadays, especially in the current coronavirus disease (COVID-19) scenario, the primary global health concern is early diagnosis, which strengthens the treatment efficacies and curtails the associated severity and mortality (Chaudhary et al., 2022b; Kaushik et al., 2020; Noh et al., 2022).”
BackgroundInternet-of-nano-things (IoNT) driven intelligent face masks to combat airborne health hazard
Chaudhary, V., Gautam, A., Silotia, P., Malik, S., Hansen, R. D. O., Khalid, M., Khosla, A., Kaushik, A. K., & Mishra, Y. K. (2022) · Materials Today · doi:10.1016/j.mattod.2022.08.019 · Cited by 80 · cited 3×
“Also, they must be fabricated using greener methods, such as bioinspired/biodiverse substances, or the outcome must be environmentally beneficial(Batra et al., 2022; Chaudhary, 2022; Chaudhary et al., 2022a).”
Self-citationLin, S., Lin, H., Yang, M., Ge, M., Chen, Y., & Zhu, Y. (2020) · Nanoscale · doi:10.1039/d0nr01444c · Cited by 80 · cited 3×
“Lin et al. (2020) reported the soluble PVP microneedle therapeutic system encumbered with the Nb2C-based MXene NS for photothermal ablation and implantation of superficial tumors in the 2nd NIR biological windows.”
BackgroundMethodZhang, W., Pan, Z., Ma, J., Wei, L., Chen, Z. X., & Wang, J. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c05757 · Cited by 80
Liu, M., Zhou, J., He, Y., Cai, Z., Ge, Y., Zhou, J., & Song, G. (2019) · Microchimica Acta · doi:10.1007/s00604-019-3945-0 · Cited by 76
Ghosh, S., Sachdeva, B., Sachdeva, P., Chaudhary, V., Rani, G. M., & Sinha, J. K. (2022) · Carbon letters · doi:10.1007/s42823-022-00397-9 · Cited by 75
Self-citationLi, Q., Li, X., Zhou, P., Chen, R., Xiao, R., & Pang, Y. (2022) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2022.114548 · Cited by 73
Nano-enabled wearable sensors for the Internet of Things (IoT)
Singh, K. R., Nayak, V., Singh, J., & Singh, R. P. (2021) · Materials Letters · doi:10.1016/j.matlet.2021.130614 · Cited by 73 · cited 1×
“…artificial intelligence (AI), bioinformatics, data clouding and 5G communications in biomedical sectors have transformed the LOC module biosensors into 5th generation biosensors with smart, remote and intelligent prospects (Jin et al., 2020; Kim et al., 2019; Singh et al., 2021; Xin et al., 2020).”
BackgroundSelf-citationGeravand, M. H. A., Saljoughi, E., Mousavi, S. M., & Kiani, S. (2021) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2021.08.048 · Cited by 73
Markandan, K., Tiong, Y. W., Sankaran, R., Sakthinathan, S., Markandan, U. D., Chaudhary, V., Numan, A., Khalid, M., & Walvekar, R. (2022) · Biotechnology and Genetic Engineering Reviews · doi:10.1080/02648725.2022.2127070 · Cited by 70 · cited 1×
“The research and development of biosensors are dedicated to the prompt and accurate monitoring of biomarkers/biochemicals in the human body due to biological imbalances resulting from chronic diseases(Gautam, 2022; Ghosh et al., 2022; Markandan et al., 2022).”
Self-citationLiu, X., Qiu, Y. L., Jiang, D., Li, F., Gan, Y., Zhu, Y., Pan, Y., Wan, H., & Wang, P. (2022) · Microsystems & Nanoengineering · doi:10.1038/s41378-022-00352-8 · Cited by 67
Zhao, J., He, C., Wu, W., Yang, H., Dong, J., Li, W., Hu, Z., Yang, M. J., Hou, C., & Huo, D. (2021) · Talanta · doi:10.1016/j.talanta.2021.122927 · Cited by 66
Self-powered wearable electronics
Tan, P., Zou, Y., Fan, Y., & Li, Z. (2020) · Wearable Technologies · doi:10.1017/wtc.2020.3 · Cited by 61 · cited 1×
“Furthermore, the incorporation of triboelectric nanogenerators in MXenes has already initiated the transformation of wearable electronic devices with sensor integration (Lei et al., 2020; S. Li et al., 2020; Tan et al., 2020; Xin et al., 2020).”
Yang, Y.-C., Lin, Y.-T., Yu, J., Chang, H., Lu, T.-Y., Huang, T., Preet, A., Hsu, Y.-J., Wang, L., & Lin, T. (2021) · ACS Applied Nano Materials · doi:10.1021/acsanm.1c01237 · Cited by 61
Gautam, A. (2022) · ECS Sensors Plus · doi:10.1149/2754-2726/ac973e · Cited by 54 · cited 1×
“The research and development of biosensors are dedicated to the prompt and accurate monitoring of biomarkers/biochemicals in the human body due to biological imbalances resulting from chronic diseases(Gautam, 2022; Ghosh et al., 2022; Markandan et al., 2022).”
Research progress of MXenes-based wearable pressure sensors
Lei, D., Liu, N., Su, T., Wang, L., Su, J., Zhang, Z., & Gao, Y. (2020) · APL Materials · doi:10.1063/5.0026984 · Cited by 50 · cited 2×
“Furthermore, the incorporation of triboelectric nanogenerators in MXenes has already initiated the transformation of wearable electronic devices with sensor integration (Lei et al., 2020; S. Li et al., 2020; Tan et al., 2020; Xin et al., 2020).”
BackgroundDe-coding Ag as an efficient antimicrobial nano-system for controlling cellular/biological functions
Chaudhary, V., Mostafavi, E., & Kaushik, A. K. (2022) · Matter · doi:10.1016/j.matt.2022.06.024 · Cited by 48 · cited 22×
“…along with the ability to maintain physicochemical as well as electrical behavior along with rich surface functionalities, clearly making them highly intriguing for designing biosensing instruments (Ansari and Malhotra, 2022; Chaudhary et al., 2022d; Khunger et al., 2021; Zhou and Zhang, 2021).”
BackgroundMethodInfluentialSelf-citationNanomedicine for neuroHIV/AIDS Management
Kaushik, A. K., Jayant, R. D., & Nair, M. G. (2018) · Nanomedicine · doi:10.2217/nnm-2018-0005 · Cited by 37 · cited 1×
“These biosensor technologies are based on nanomaterials as biological sensing components integrated with internet-of-things (IoTs) and rapid data processing modules within a transducer arrangement (Kaushik et al., 2018; Patel et al., 2016; Verma and Bhardwaj, 2015).”
Self-citationSARS-CoV-2-on-Chip for Long COVID Management
Cherusseri, J., Savio, C. M., Khalid, M., Chaudhary, V., Numan, A., Varma, S. J., Menon, A., & Kaushik, A. K. (2022) · Biosensors · doi:10.3390/bios12100890 · Cited by 35
Self-citationPoint-of-care non-invasive enzyme-cleavable nanosensors for acute transplant rejection detection
Liu, S., Ma, K., Liu, L.-S., Wang, K., Zhang, Y., Bi, Z., Chen, Y.-X., Chen, K., Wang, C., & Qiao, S. (2022) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2022.114568 · Cited by 31
Chaudhary, V., Bhadola, P., Kaushik, A. K., Khalid, M., Furukawa, H., & Khosla, A. (2022) · Scientific Reports · doi:10.1038/s41598-022-16781-4 · Cited by 31
Self-citationProspects of green nanotechnology for efficient management of neurodegenerative diseases
Chaudhary, V. (2022) · Frontiers in Nanotechnology · doi:10.3389/fnano.2022.1055708 · Cited by 28 · cited 6×
“Optimizing the material ’ s unique physicochemical attributes is the key to obtaining outstanding quality and fulfilling industrial material demands for the targeted application (Chaudhary, 2021a, 2022; Chaudhary et al., 2017, 2022a; Chaudhary and Chavali, 2021; Chaudhary and Kaur, 2015).”
InfluentialSelf-citationKukhtin, A., Sebastian, T., Golova, J. B., Perov, A., Knickerbocker, C., Linger, Y., Bueno, A., Qu, P., Villanueva, M., Holmberg, R. C., et al. (2019) · Lab on a Chip · doi:10.1039/c8lc01404c · Cited by 27 · cited 1×
“…from 1 st generation to 5 th generation with prospects of 6 th generation modules; subparts adapted from: Glucose biosensor ((Clark and Lyons, 2006)), Immunosensor ((Mani et al., 2009)), Optical biosensor ((Seitz, 1984)), Lab-on-chip ((Kukhtin et al., 2019)), Hospital-on-chip ((Yang et al., 2021)).”
Chaudhary, V. (2021) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2021.1959932 · Cited by 27 · cited 7×
“Optimizing the material ’ s unique physicochemical attributes is the key to obtaining outstanding quality and fulfilling industrial material demands for the targeted application (Chaudhary, 2021a, 2022; Chaudhary et al., 2017, 2022a; Chaudhary and Chavali, 2021; Chaudhary and Kaur, 2015).”
InfluentialSelf-citationLow-dimensional material based wearable sensors
Wu, C., Zhang, X., Wang, R., Chen, L. J., Nie, M., Zhang, Z., Huang, X.-D., & Han, L. (2021) · Nanotechnology · doi:10.1088/1361-6528/ac33d1 · Cited by 26
Sensitive CTC analysis and dual-mode MRI/FL diagnosis based on a magnetic core-shell aptasensor
Wang, Y., Huo, T., Du, Y., Qian, M., Lin, C., Nie, H., Li, W., Hao, T., Zhang, X., Lin, N., et al. (2022) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2022.114530 · Cited by 23
Chaudhary, V. (2021) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2021.1912095 · Cited by 21 · cited 3×
“For example, a polymer with 1D charge transfer routes detects stimulus variations more efficiently than one with 3D charge carrier transports (Chaudhary, 2021a, 2022; Chaudhary et al., 2017).”
BackgroundSelf-citationDu, J.-F., Chen, J., Liu, X.-P., Mao, C., & Jin, B. (2022) · Microchimica Acta · doi:10.1007/s00604-022-05359-6 · Cited by 17
Cited by
(2023) · doi:10.3390/s23218924 · Cited by 13
Metadata
- Authors
- Chaudhary, V., Khanna, V., Ahmed Awan, H. T., Singh, K., Khalid, M., Mishra, Y. K., Bhansali, S., Li, C.-Z., & Kaushik, A.
- Venue
- Biosensors and Bioelectronics
- Publisher
- Elsevier BV
- Published
- 2023-01
- Volume
- 220
- Pages
- 114847
- ISSN
- 0956-5663 (ISSN-L)
- OpenAlex
- W4308348827
- Cited by
- 176
- References
- 127
- FWCI
- 10.85
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.