The DOI matches its Crossref record; 121 of the 121 references it cites were found in a registry or an index.
Sustainability of additive manufacturing: the circular economy of materials and environmental perspectives
Open accessAbstract
This research is a comprehensive review of the sustainability of additive manufacturing, from the circular economy and recycling of materials to other environmental challenges involving the safety of materials and manufacturing. There has been important progress in this area, with an increasing number of papers that cover diverse environmental aspects, including the circular economy, recycling and the life cycle assessment of materials. This increase is due to the importance that scientists, industry, government and society are now giving to these topics. This review seeks to develop a greater awareness in relation to the possibilities and implications in the use of the AM, as well as to encourage sustainable development by raising awareness in relation to the taking of necessary actions to achieve compliance of the Sustainable Development Goals. Similarly, current trends are examined in relation to the practices that are currently being adopted in order to ensure that AM is consolidated as a sustainable and convenient practice in the economic, social and environmental spheres. In general, polymers, ceramics, metals and composite materials are now undergoing intensive research to improve their use. Although this research shows that significant progress has been made on several relevant issues, using materials optimization to minimize energy and waste is still far from a global solution.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metals
Herzog, D., Seyda, V., Wycisk, E., & Emmelmann, C. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.07.019 · Cited by 4,759
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Flexible mechanical metamaterials
Bertoldi, K., Vitelli, V., Christensen, J., & van Hecke, M. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.66 · Cited by 1,867
A review on additive manufacturing of polymer-fiber composites
Parandoush, P., & Lin, D. (2017) · Composite Structures · doi:10.1016/j.compstruct.2017.08.088 · Cited by 1,270
Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1209867 · Cited by 1,257
Additive manufacturing of tissues and organs
Melchels, F. P. W., Domingos, M. A. N., Klein, T. J., Malda, J., Bartolo, P. J., & Hutmacher, D. W. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.11.007 · Cited by 1,213
Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
Huang, Y., Leu, M. C., Mazumder, J., & Donmez, A. (2015) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028725 · Cited by 947
Nascimento, D. L. M., Alencastro, V., Quelhas, O. L. G., Caiado, R. G. G., Garza-Reyes, J. A., Rocha-Lona, L., & Tortorella, G. (2019) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-03-2018-0071 · Cited by 903
Additive Manufacturing of Ceramic‐Based Materials
Travitzky, N., Bonet, A., Dermeik, B., Fey, T., Filbert‐Demut, I., Schlier, L., Schlordt, T., & Greil, P. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400097 · Cited by 878
Huang, R., Riddle, M., Graziano, D., Warren, J., Das, S., Nimbalkar, S., Cresko, J., & Masanet, E. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.04.109 · Cited by 805
Additive manufacturing: A framework for implementation
Mellor, S., Hao, L., & Zhang, D. (2014) · International Journal of Production Economics · doi:10.1016/j.ijpe.2013.07.008 · Cited by 777
Application of Directed Energy Deposition-Based Additive Manufacturing in Repair
Saboori, A., Aversa, A., Marchese, G., Biamino, S., Lombardi, M., & Fino, P. (2019) · Applied Sciences · doi:10.3390/app9163316 · Cited by 537
Unlocking value for a circular economy through 3D printing: A research agenda
Despeisse, M., Baumers, M., Brown, P., Charnley, F., Ford, S. J., Garmulewicz, A., Knowles, S., Minshall, T. H. W., Mortara, L., Reed-Tsochas, F. P., et al. (2017) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2016.09.021 · Cited by 529
Ultrafine particle emissions from desktop 3D printers
Stephens, B., Azimi, P., El Orch, Z., & Ramos, T. (2013) · Atmospheric Environment · doi:10.1016/j.atmosenv.2013.06.050 · Cited by 488
Tang, H. P., Qian, M., Liu, N., Zhang, X. Z., Yang, G. Y., & Wang, J. (2015) · JOM · doi:10.1007/s11837-015-1300-4 · Cited by 483
Additive manufacturing for the food industry
Lipton, J. I., Cutler, M., Nigl, F., Cohen, D., & Lipson, H. (2015) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2015.02.004 · Cited by 459
Recycling and remanufacturing of 3D printed continuous carbon fiber reinforced PLA composites
Tian, X., Liu, T., Wang, Q., Dilmurat, A., Li, D., & Ziegmann, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.11.139 · Cited by 432
Sustainability of additive manufacturing: An overview on its energy demand and environmental impact
Peng, T., Kellens, K., Tang, R., Chen, C., & Chen, G. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.022 · Cited by 426
Azimi, P., Zhao, D., Pouzet, C., Crain, N. E., & Stephens, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.5b04983 · Cited by 389
Frontiers of 3D Printing/Additive Manufacturing: from Human Organs to Aircraft Fabrication
Murr, L. E. (2016) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2016.08.011 · Cited by 329
Environmental assessment of additive manufacturing in the automotive industry
Böckin, D., & Tillman, A.-M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.086 · Cited by 307
Hadadzadeh, A., Baxter, C., Amirkhiz, B. S., & Mohammadi, M. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.07.014 · Cited by 297
Additive manufacturing of custom orthoses and prostheses—A review
Chen, R. K., Jin, Y.-A., Wensman, J., & Shih, A. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.04.002 · Cited by 292
Is 3D printing safe? Analysis of the thermal treatment of thermoplastics: ABS, PLA, PET, and nylon
Wojtyła, S., Klama, P., & Baran, T. (2017) · Journal of Occupational and Environmental Hygiene · doi:10.1080/15459624.2017.1285489 · Cited by 288
LCA of plastic waste recovery into recycled materials, energy and fuels in Singapore
Khoo, H. H. (2019) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.02.010 · Cited by 286
Biobased Acrylate Photocurable Resin Formulation for Stereolithography 3D Printing
Voet, V. S. D., Strating, T., Schnelting, G. H. M., Dijkstra, P., Tietema, M., Xu, J., Woortman, A. J. J., Loos, K., Jager, J., & Folkersma, R. (2018) · ACS Omega · doi:10.1021/acsomega.7b01648 · Cited by 279
3D printing of high density polyethylene by fused filament fabrication
Schirmeister, C. G., Hees, T., Licht, E. H., & Mülhaupt, R. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.003 · Cited by 271
Thermal post-processing of AlSi10Mg parts produced by Selective Laser Melting using recycled powder
Maamoun, A. H., Elbestawi, M., Dosbaeva, G. K., & Veldhuis, S. C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.03.014 · Cited by 270
Bourhis, F. L., Kerbrat, O., Hascoet, J.-Y., & Mognol, P. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5151-2 · Cited by 269
Breakthrough in the printing tactics for stimuli-responsive materials: 4D printing
Rastogi, P., & Kandasubramanian, B. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.02.085 · Cited by 267
Comparative environmental impacts of additive and subtractive manufacturing technologies
Paris, H., Mokhtarian, H., Coatanéa, E., Museau, M., & Ituarte, I. F. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.04.036 · Cited by 263
Sustainability Characterization for Additive Manufacturing
Mani, M., Lyons, K. W., & Gupta, S. K. (2014) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.119.016 · Cited by 250
Environmental design guidelines for digital fabrication
Agustí-Juan, I., & Habert, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.10.190 · Cited by 250
Mechanical Properties of Specimens 3D Printed with Virgin and Recycled Polylactic Acid
Anderson, I. (2017) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2016.0054 · Cited by 248
Revealing the Effects of Powder Reuse for Selective Laser Melting by Powder Characterization
Cordova, L., Campos, M., & Tinga, T. (2019) · JOM · doi:10.1007/s11837-018-3305-2 · Cited by 244
Polymer recycling in an open-source additive manufacturing context: Mechanical issues
Cruz Sanchez, F. A., Boudaoud, H., Hoppe, S., & Camargo, M. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.05.013 · Cited by 243
Recycled polypropylene blends as novel 3D printing materials
Zander, N. E., Gillan, M., Burckhard, Z., & Gardea, F. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2018.11.009 · Cited by 239
Tang, Y., Mak, K., & Zhao, Y. F. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.06.037 · Cited by 237
Fused Particle Fabrication 3-D Printing: Recycled Materials’ Optimization and Mechanical Properties
Woern, A. L., Byard, D. J., Oakley, R. B., Fiedler, M. J., Snabes, S. L., & Pearce, J. M. (2018) · Materials · doi:10.3390/ma11081413 · Cited by 233
Exploring the potential of additive manufacturing for product design in a circular economy
Sauerwein, M., Doubrovski, E., Balkenende, R., & Bakker, C. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.108 · Cited by 231
Zhao, P., Rao, C., Gu, F., Sharmin, N., & Fu, J. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.06.275 · Cited by 224
Recycled polyethylene terephthalate as a new FFF feedstock material
Zander, N. E., Gillan, M., & Lambeth, R. H. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.03.007 · Cited by 207
Ashkenazi, D. (2019) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2019.03.011 · Cited by 207
Asgari, H., Baxter, C., Hosseinkhani, K., & Mohammadi, M. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.09.041 · Cited by 201
A review: additive manufacturing for active electronic components
Saengchairat, N., Tran, T. A., & Chua, C. K. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1253181 · Cited by 195
Bekker, A. C. M., & Verlinden, J. C. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.148 · Cited by 190
Ingarao, G., Priarone, P. C., Deng, Y., & Paraskevas, D. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.12.115 · Cited by 178
Chong, S., Pan, G., Khalid, M., Yang, T. C. ‐., Hung, S.-T., & Huang, C.-M. (2016) · Journal of Polymers and the Environment · doi:10.1007/s10924-016-0793-4 · Cited by 174
Leino, M., Pekkarinen, J., & Soukka, R. (2016) · Physics Procedia · doi:10.1016/j.phpro.2016.08.077 · Cited by 174
Life Cycle Assessment of 3D Printed Products in a Distributed Manufacturing System
Cerdas, F., Juraschek, M., Thiede, S., & Herrmann, C. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12618 · Cited by 172
About the Use of Recycled or Biodegradable Filaments for Sustainability of 3D Printing
Pakkanen, J., Manfredi, D., Minetola, P., & Iuliano, L. (2017) · Smart innovation, systems and technologies · doi:10.1007/978-3-319-57078-5_73 · Cited by 166
Reich, M. J., Woern, A. L., Tanikella, N. G., & Pearce, J. M. (2019) · Materials · doi:10.3390/ma12101642 · Cited by 164
Characteristics of Inconel Powders for Powder-Bed Additive Manufacturing
Nguyen, Q. B., Nai, M. L. S., Zhu, Z., Sun, C.-N., Wei, J., & Zhou, W. (2017) · Engineering · doi:10.1016/j.eng.2017.05.012 · Cited by 163
A comparison between mechanical properties of specimens 3D printed with virgin and recycled PLA
Lanzotti, A., Martorelli, M., Maietta, S., Gerbino, S., Penta, F., & Gloria, A. (2019) · Procedia CIRP · doi:10.1016/j.procir.2019.02.030 · Cited by 162
Emission of particulate matter from a desktop three-dimensional (3D) printer
Yi, J., LeBouf, R. F., Duling, M. G., Nurkiewicz, T., Chen, B. T., Schwegler-Berry, D., Virji, M. A., & Stefaniak, A. B. (2016) · Journal of Toxicology and Environmental Health, Part A · doi:10.1080/15287394.2016.1166467 · Cited by 160
Polymer recycling codes for distributed manufacturing with 3-D printers
Hunt, E. J., Zhang, C., Anzalone, N., & Pearce, J. M. (2015) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2015.02.004 · Cited by 158
Characterization of Emissions from a Desktop 3D Printer
Mendes, L., Kangas, A., Kukko, K., Mølgaard, B., Säämänen, A. J., Kanerva, T., Ituarte, I. F., Huhtiniemi, M., Stockmann‐Juvala, H., Partanen, J. P., et al. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12569 · Cited by 158
Gu, J., Wensing, M., Uhde, E., & Salthammer, T. (2019) · Environment International · doi:10.1016/j.envint.2018.12.014 · Cited by 158
Carrion, P. E., Soltani-Tehrani, A., Phan, N., & Shamsaei, N. (2018) · JOM · doi:10.1007/s11837-018-3248-7 · Cited by 152
Disruptive Technology as an Enabler of the Circular Economy: What Potential Does 3D Printing Hold?
Garmulewicz, A., Holweg, M., Veldhuis, H., & Yang, A. (2018) · California Management Review · doi:10.1177/0008125617752695 · Cited by 151
Circular Economy: Questions for Responsible Minerals, Additive Manufacturing and Recycling of Metals
Giurco, D., Littleboy, A. K., Boyle, T., Fyfe, J., & White, S. B. (2014) · Resources · doi:10.3390/resources3020432 · Cited by 142
Three‐Dimensional Printing with Biomass‐Derived PEF for Carbon‐Neutral Manufacturing
Kucherov, F. A., Gordeev, E. G., Kashin, A. S., & Ananikov, V. P. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201708528 · Cited by 142
Utilization of recycled glass for 3D concrete printing: rheological and mechanical properties
Ting, G. H. A., Tay, Y. W. D., Qian, Y., & Tan, M. J. (2019) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-019-00857-x · Cited by 140
Stefaniak, A. B., LeBouf, R. F., Yi, J., Ham, J. E., Nurkewicz, T., Schwegler‐Berry, D., Chen, B. T., Wells, J. R., Duling, M. G., Lawrence, R. B., et al. (2017) · Journal of Occupational and Environmental Hygiene · doi:10.1080/15459624.2017.1302589 · Cited by 133
Deng, Y., Cao, S., Chen, A., & Guo, Y. (2016) · Building and Environment · doi:10.1016/j.buildenv.2016.05.021 · Cited by 128
Characterization of particulate matters and total VOC emissions from a binder jetting 3D printer
Afshar‐Mohajer, N., Wu, C., Ladun, T., Rajon, D. A., & Huang, Y. H. (2015) · Building and Environment · doi:10.1016/j.buildenv.2015.07.013 · Cited by 124
Zhao, X. G., Hwang, K., Lee, D., Kim, T., & Kim, N. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.01.257 · Cited by 124
Huang, R., Riddle, M. E., Graziano, D., Das, S., Nimbalkar, S. U., Cresko, J., & Masanet, E. R. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12641 · Cited by 118
Walachowicz, F., Bernsdorf, I., Papenfuss, U., Zeller, C., Graichen, A., Navrotsky, V., Rajvanshi, N., & Kiener, C. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12637 · Cited by 117
Reuse of powder feedstock for directed energy deposition
Terrassa, K. L., Haley, J. C., MacDonald, B. E., & Schoenung, J. M. (2018) · Powder Technology · doi:10.1016/j.powtec.2018.07.065 · Cited by 113
Sustainable Production in a Circular Economy: A Business Model for Re-Distributed Manufacturing
Turner, C. J., Moreno, M., Mondini, L., Salonitis, K., Charnley, F., Tiwari, A., & Hutabarat, W. (2019) · Sustainability · doi:10.3390/su11164291 · Cited by 113
Green fab lab applications of large-area waste polymer-based additive manufacturing
Byard, D. J., Woern, A. L., Oakley, R. B., Fiedler, M. J., Snabes, S. L., & Pearce, J. M. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.03.006 · Cited by 111
Yang, S. L., Min, W., Ghibaudo, J., & Zhao, Y. F. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.05.380 · Cited by 111
Mohammed, M. I., Wilson, D. R., Gomez-Kervin, E., Tang, B., & Wang, J. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b02368 · Cited by 110
Chen, P., Tang, M., Zhu, W., Yang, L., Wen, S., Yan, C., Ji, Z., Nan, H., & Shi, Y. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.03.035 · Cited by 108
Life cycle assessment of 3D printing geo‐polymer concrete: An ex‐ante study
Yao, Y., Hu, M., Maio, F. D., et al. (2019) · Journal of Industrial Ecology · doi:10.1111/jiec.12930 · Cited by 108
An exposure assessment of desktop 3D printing
Zontek, T. L., Ogle, B. R., Jankovic, J. T., & Hollenbeck, S. M. (2016) · ACS Chemical Health & Safety · doi:10.1016/j.jchas.2016.05.008 · Cited by 102
Transformation of E-Waste Plastics into Sustainable Filaments for 3D Printing
Gaikwad, V. V., Ghose, A., Cholake, S. T., Rawal, A., Iwato, M., & Sahajwalla, V. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03105 · Cited by 99
Evaluating Eco‐Efficiency of 3D Printing in the Aeronautic Industry
Mami, F., Revéret, J., Fallaha, S., & Margni, M. D. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12693 · Cited by 95
Particle emissions from fused deposition modeling 3D printers: Evaluation and meta-analysis
Byrley, P., George, B. J., Boyes, W. K., & Rogers, K. R. (2018) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2018.11.070 · Cited by 95
Peng, S., Li, T., Wang, X., Dong, M., Liu, Z., Shi, J., & Zhang, H. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12628 · Cited by 88
Le, V. T., Paris, H., & Mandil, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.06.204 · Cited by 87
Stefaniak, A. B., LeBouf, R. F., Duling, M. G., Yi, J., Abukabda, A. B., McBride, C., & Nurkiewicz, T. R. (2017) · Toxicology and Applied Pharmacology · doi:10.1016/j.taap.2017.09.016 · Cited by 85
Singh, A. K., Patil, B., Hoffmann, N., Saltonstall, B., Doddamani, M. R., & Gupta, N. (2018) · JOM · doi:10.1007/s11837-017-2734-7 · Cited by 84
Hart, K. R., Frketic, J. B., & Brown, J. R. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.04.011 · Cited by 83
A Low Cost Desktop Electrochemical Metal 3D Printer
Chen, X., Liu, X., Childs, P., Brandon, N. P., & Wu, B. (2017) · Advanced Materials Technologies · doi:10.1002/admt.201700148 · Cited by 82
Corcione, C. E., Palumbo, E., Masciullo, A., Montagna, F., & Torricelli, M. C. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.10.011 · Cited by 80
de Miguel, J. C. N., Centeno, M. Á., Laguna, O. H., & Odriozola, J. A. (2018) · Catalysts · doi:10.3390/catal8120578 · Cited by 80
Burkhart, M., & Aurich, J. C. (2015) · Procedia CIRP · doi:10.1016/j.procir.2015.02.194 · Cited by 79
Investigation of Ultrafine Particle Emissions of Desktop 3D Printers in the Clean Room
Zhou, Y. H., Kong, X.-R., Chen, A., & Cao, S. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.08.1099 · Cited by 79
Local and recyclable materials for additive manufacturing: 3D printing with mussel shells
Sauerwein, M., & Doubrovski, E. L. (2018) · Materials Today Communications · doi:10.1016/j.mtcomm.2018.02.028 · Cited by 78
Use of 3D Printing by Museums: Educational Exhibits, Artifact Education, and Artifact Restoration
Short, D. B. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0030 · Cited by 77
Sustainability of 3D Printing: A Critical Review and Recommendations
Liu, Z.-C., Jiang, Q.-H., Zhang, Y., Li, T., & Zhang, H.-C. (2016) · ASME International Manufacturing Science and Engineering Conference (MSEC) · doi:10.1115/msec2016-8618 · Cited by 74
Liu, Z., Jiang, Q., Cong, W., Li, T., & Zhang, H. (2017) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-017-1622-6 · Cited by 73
Evaluation of emissions and exposures at workplaces using desktop 3-dimensional printers
Stefaniak, A. B., Johnson, A. R., du Preez, S., Hammond, D. R., Wells, J. R., Ham, J. E., LeBouf, R. F., Menchaca, K., Martin, S. B., Duling, M. G., et al. (2018) · ACS Chemical Health & Safety · doi:10.1016/j.jchas.2018.11.001 · Cited by 66
State of art review on sustainable additive manufacturing
Agrawal, R., & Vinodh, S. (2019) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2018-0085 · Cited by 63
Insights Into Emissions and Exposures From Use of Industrial-Scale Additive Manufacturing Machines
Stefaniak, A. B., Johnson, A. R., du Preez, S., Hammond, D. R., Wells, J. R., Ham, J. E., LeBouf, R. F., Martin, S. B., Duling, M. G., Bowers, L. N., et al. (2018) · Safety and Health at Work · doi:10.1016/j.shaw.2018.10.003 · Cited by 62
Jiang, Q., Liu, Z., Li, T., Cong, W., & Zhang, H. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03486-8 · Cited by 61
Environmental performance of additive manufacturing process – an overview
Garcia, F. L., Moris, V. A. D. S., Nunes, A. O., & Silva, D. A. L. (2018) · Rapid Prototyping Journal · doi:10.1108/rpj-05-2017-0108 · Cited by 57
Energy and Resource Efficiency of SLS/SLM Processes
Kellens, K., Yasa, E., Renaldi, R., Dewulf, W., Kruth, J., & Duflou, J. R. (2011) · doi:10.26153/tsw/15272 · Cited by 57
Development of filaments using selective laser sintering waste powder
Kumar, S., & Czekanski, A. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.07.202 · Cited by 56
Nagarajan, H. P. N., & Haapala, K. R. (2018) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2018.06.005 · Cited by 55
Le, V. T., & Paris, H. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2264-7 · Cited by 51
An Additive Manufacturing Solution to Produce Big Green Parts from Tires and Recycled Plastics
Domingues, J., Marques, T. M. G., Mateus, A., Carreira, P., & Malça, C. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.08.028 · Cited by 47
Pan, G., Chong, S., Tsai, H., Lu, W., & Yang, T. C. ‐. (2016) · Advances in Polymer Technology · doi:10.1002/adv.21777 · Cited by 44
The Role of re-design for Additive Manufacturing on the Process Environmental Performance
Priarone, P. C., Ingarao, G., Lunetto, V., Lorenzo, R. D., & Settineri, L. (2018) · Procedia CIRP · doi:10.1016/j.procir.2017.11.047 · Cited by 43
Santander, P., Sanchez, F. A. C., Boudaoud, H., & Camargo, M. (2018) · IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC) · doi:10.1109/ice.2018.8436296 · Cited by 42
3-D Printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing
Woern, A. L., & Pearce, J. M. (2018) · Inventions · doi:10.3390/inventions3040078 · Cited by 37
New Poly(lactide-urethane-isocyanurate) Foams Based on Bio-Polylactide Waste
Paciorek‐Sadowska, J., Borowicz, M., & Isbrandt, M. (2019) · Polymers · doi:10.3390/polym11030481 · Cited by 35
Malshe, H., Nagarajan, H. P. N., Pan, Y., & Haapala, K. R. (2015) · Volume 2: Materials; Biomanufacturing; Properties, Applications and Systems; Sustainable Manufacturing · doi:10.1115/msec2015-9371 · Cited by 33
Melugiri-Shankaramurthy, B., Sargam, Y., Zhang, X., Sun, W. J., Wang, K., & Qin, H. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.116696 · Cited by 32
Lee, D., Lee, Y., Lee, K., Ko, Y., & Kim, N. (2018) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4041747 · Cited by 29
On the tolerable limits of granulated recycled material additives to maintain structural integrity
Clemon, L., & Zohdi, T. I. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.02.099 · Cited by 28
Energy and Cost Assessment of 3D Printed Mobile Case Covers
Minetola, P., & Eyers, D. R. (2018) · Procedia CIRP · doi:10.1016/j.procir.2017.11.065 · Cited by 24
Product Circularity Assessment Methodology
Angioletti, C. M., Despeisse, M., & Rocca, R. L. (2017) · IFIP advances in information and communication technology · doi:10.1007/978-3-319-66926-7_47 · Cited by 20
Pin Fin Array Heat Sinks by Cold Spray Additive Manufacturing: Economics of Powder Recycling
Perry, J., Richer, P., Jodoin, B., & Matte, E. (2018) · Journal of Thermal Spray Technology · doi:10.1007/s11666-018-0758-3 · Cited by 18
Waste materials superuse and upcycling in architecture: design and experimentation
Baiani, S., & Altamura, P. (2018) · TECHNE - Journal of Technology for Architecture and Environment · doi:10.13128/techne-23035 · Cited by 14
Comments About the Human Health Risks Related to Additive Manufacturing
Lunetto, V., Catalano, A. R., Priarone, P. C., & Settineri, L. (2018) · Smart innovation, systems and technologies · doi:10.1007/978-3-030-04290-5_10 · Cited by 12
Is 3D printed house sustainable?
Oberti, I., & Plantamura, F. (2015) · Infoscience (Ecole Polytechnique Fédérale de Lausanne) · doi:10.5075/epfl-cisbat2015-173-178 · Cited by 9
Machine Learning Algorithms on Density Prediction of Electron Beam Selective Melted Parts
Qi, X., Li, C., Li, Y., et al. (2019) · Journal of Mechanical Engineering · doi:10.3901/jme.2019.15.048 · Cited by 8
Li, C., Jiang, C., Peng, M., Li, T., Yang, Z., Liu, Z., Li, N., Wang, C., Dai, K., & Wang, J. (2018) · RSC Advances · doi:10.1039/c7ra12677h · Cited by 7
Cited by
Role of additive manufacturing applications towards environmental sustainability
Javaid, M., Haleem, A., Singh, R. P., Suman, R., & Rab, S. (2021) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2021.07.005 · Cited by 419
Kanishka, K., & Acherjee, B. (2023) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2023.10.024 · Cited by 343
Khalid, M. Y., Arif, Z. U., Ahmed, W., & Arshad, H. (2022) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2021.e00382 · Cited by 314
Machine learning in predicting mechanical behavior of additively manufactured parts
Nasiri, S., & Khosravani, M. R. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.07.004 · Cited by 202
The sustainability of emerging technologies for use in pharmaceutical manufacturing
Weaver, E., O’Hagan, C., & Lamprou, D. A. (2022) · Expert Opinion on Drug Delivery · doi:10.1080/17425247.2022.2093857 · Cited by 70
“The previous paragraph highlights a poignant example for the promotion of a ‘circular economy’ [27,48].”
Background
Metadata
- Authors
- Colorado, H. A., Velásquez, E. I. G., & Monteiro, S. N.
- Venue
- Journal of Materials Research and Technology
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 9
- Issue
- 4
- Pages
- 8221-8234
- ISSN
- 2214-0697 (ISSN-L)
- 2238-7854
- OpenAlex
- W3034675535
- Cited by
- 320
- References
- 121
- FWCI
- 13.49
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.