The DOI matches its Crossref record; 178 of the 178 references it cites were found in a registry or an index.
Recent developments in the passive and hybrid thermal management techniques of lithium-ion batteries
Abstract
The main obstacle in the transition from petrol/diesel vehicles to electric vehicles (EVs) is the performance of power battery. The widely used lithium-ion battery is highly sensitive to the temperature, which affects the performance, lifespan, and safety of the battery. Hence, the proper battery thermal management system (BTMS) is necessary with EVs. BTMS can reduce the negative influence of the temperature by decreasing the maximum battery temperature and temperature difference inside the battery. This article reviews various battery thermal management systems and categorized as active and passive systems. The major focus of the review is on passive BTMS using phase change material (PCM) and heat pipe. The results show that PCM and heat pipe based BTMS can provide better thermal management without any power consumption. Further, the hybrid BTMS with the combination of active/passive is presented, and the research results show that hybrid BTMS can provide better thermal management compared to single BTMS. The BTMS is statistically reviewed in terms of maximum battery temperature and temperature difference, and percentage improvement using BTMS is also provided. This article provides direction towards the development of practical and economic BTMS for with limited power consumption, volume, and weight constraints.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Challenges in the development of advanced Li-ion batteries: a review
Etacheri, V., Marom, R., Elazari, R., Salitra, G., & Aurbach, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01598b · Cited by 6,726
High-performance lithium battery anodes using silicon nanowires
Chan, C. K., Peng, H., Liu, G., McIlwrath, K., Zhang, X. F., Huggins, R. A., & Cui, Y. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.411 · Cited by 6,683
Review on thermal energy storage with phase change materials and applications
Sharma, A., Tyagi, V. V., Chen, C. R., & Buddhi, D. (2009) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2007.10.005 · Cited by 5,936
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
Thermal runaway mechanism of lithium ion battery for electric vehicles: A review
Feng, X., Ouyang, M., Liu, X., Lu, L., Xia, Y., & He, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.013 · Cited by 4,182
Thermal runaway caused fire and explosion of lithium ion battery
Wang, Q., Ping, P., Zhao, X., Chu, G., Sun, J., & Chen, C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.038 · Cited by 3,103
The lithium-ion battery: State of the art and future perspectives
Zubi, G., Dufo-López, R., Carvalho, M., & Pasaoglu, G. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.03.002 · Cited by 2,563
A critical review of thermal issues in lithium-ion batteries
Bandhauer, T. M., Garimella, S., & Fuller, T. F. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3515880 · Cited by 2,192
Hannan, M. A., Lipu, M. S. H., Hussain, A., & Mohamed, A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.001 · Cited by 2,005
Liu, H., Wei, Z., He, W., & Zhao, J. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.08.016 · Cited by 1,332
Review on battery thermal management system for electric vehicles
Kim, J., Oh, J., & Lee, H. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.12.020 · Cited by 1,292
A critical review of battery thermal performance and liquid based battery thermal management
Wu, W., Wang, S., Wu, W., Chen, K., Hong, S., & Lai, Y. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.12.051 · Cited by 1,214
A review of power battery thermal energy management
Rao, Z., & Wang, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.096 · Cited by 1,207
A review on phase change material (PCM) for sustainable passive cooling in building envelopes
Akeiber, H., Nejat, P., Majid, M. Z. A., Wahid, M. A., Jomehzadeh, F., Zeynali Famileh, I., Calautit, J. K., Hughes, B. R., & Zaki, S. A. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.03.036 · Cited by 1,075
Challenges and Recent Progress in the Development of Si Anodes for Lithium‐Ion Battery
Jin, Y., Zhu, B., Lu, Z., Liu, N., & Zhu, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700715 · Cited by 1,074
In-operando high-speed tomography of lithium-ion batteries during thermal runaway
Finegan, D. P., Scheel, M., Robinson, J. B., Tjaden, B., Hunt, I., Mason, T. J., Millichamp, J., Di Michiel, M., Offer, G. J., Hinds, G., et al. (2015) · Nature Communications · doi:10.1038/ncomms7924 · Cited by 844
Thermal stability of phase change materials used in latent heat energy storage systems: A review
Rathod, M. K., & Banerjee, J. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.10.022 · Cited by 767
Self-citationThermal-Electrochemical Modeling of Battery Systems
Gu, W. B., & Wang, C. Y. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393625 · Cited by 746
Ling, Z., Wang, F., Fang, X., Gao, X., & Zhang, Z. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.03.080 · Cited by 726
Wang, T., Tseng, K. J., Zhao, J., & Wei, Z. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.08.013 · Cited by 713
Investigation of power battery thermal management by using mini-channel cold plate
Huo, Y., Rao, Z., Liu, X., & Zhao, J. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.10.015 · Cited by 712
A Novel Thermal Management System for Electric Vehicle Batteries Using Phase-Change Material
Hallaj, S. A., & Selman, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393888 · Cited by 662
A Nickel Metal Hydride Battery for Electric Vehicles
Ovshinsky, S. R., Fetcenko, M. A., & Ross, J. (1993) · Science · doi:10.1126/science.260.5105.176 · Cited by 602
Feng, X., Sun, J., Ouyang, M., Wang, F., He, X., Lu, L., & Peng, H. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.017 · Cited by 589
Ling, Z., Zhang, Z., Shi, G., Fang, X., Wang, L., Gao, X., Fang, Y., Xu, T., Wang, S., & Liu, X. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.017 · Cited by 558
Graphene-enhanced hybrid phase change materials for thermal management of Li-ion batteries
Goli, P., Legedza, S., Dhar, A., Salgado, R., Renteria, J., & Balandin, A. A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.135 · Cited by 547
Deng, Y., Feng, C., E, J., Zhu, H., Chen, J., Wen, M., & Yin, H. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.06.043 · Cited by 542
Fan, L., Khodadadi, J. M., & Pesaran, A. A. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.050 · Cited by 534
Ruiz, V., Pfrang, A., Kriston, A., Omar, N., Van den Bossche, P., & Boon-Brett, L. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.195 · Cited by 534
Heyhat, M. M., Mousavi, S., & Siavashi, M. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101235 · Cited by 527
Shim, J. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00363-4 · Cited by 519
An alternative cooling system to enhance the safety of Li-ion battery packs
Kizilel, R., Sabbah, R., Selman, J. R., & Al-Hallaj, S. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.06.074 · Cited by 513
Experimental investigation on thermal management of electric vehicle battery with heat pipe
Rao, Z., Wang, S., Wu, M., Lin, Z., & Li, F. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.08.014 · Cited by 486
High-temperature storage and cycling of C-LiFePO4/graphite Li-ion cells
Amine, K., Liu, J., & Belharouak, I. (2005) · Electrochemistry Communications · doi:10.1016/j.elecom.2005.04.018 · Cited by 480
Wilke, S., Schweitzer, B., Khateeb, S., & Al-Hallaj, S. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.11.018 · Cited by 475
Yang, N., Zhang, X., Li, G., & Hua, D. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.049 · Cited by 467
Zou, D., Ma, X., Liu, X., Zheng, P., & Hu, Y. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.12.024 · Cited by 461
Wu, W., Yang, X., Zhang, G., Chen, K., & Wang, S. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.02.022 · Cited by 455
Capacity fade of Sony 18650 cells cycled at elevated temperatures
Ramadass, P., Haran, B., White, R., & Popov, B. N. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00474-3 · Cited by 450
Electric vehicles batteries thermal management systems employing phase change materials
Ianniciello, L., Biwolé, P. H., & Achard, P. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.12.071 · Cited by 426
Wang, Z., Zhang, Z., Jia, L., & Yang, L. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.01.009 · Cited by 425
Kong, D., Peng, R., Ping, P., Du, J., Chen, G., & Wen, J. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112280 · Cited by 423
Li, W. Q., Qu, Z. G., He, Y. L., & Tao, Y. B. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.006 · Cited by 416
Rao, Z., Wang, Q., & Huang, C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.12.021 · Cited by 404
Ultra-thin minichannel LCP for EV battery thermal management
Jin, L. W., Lee, P. S., Kong, X. X., Fan, Y., & Chou, S. K. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.07.013 · Cited by 393
Jiang, Z. Y., & Qu, Z. G. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.03.043 · Cited by 380
Thermal management of a Li-ion battery using carbon fiber-PCM composites
Babapoor, A., Azizi, M., & Karimi, G. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.02.068 · Cited by 380
Ye, Y., Saw, L. H., Shi, Y., & Tay, A. A. O. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.04.066 · Cited by 375
Electric vehicle battery thermal management system with thermoelectric cooling
Lyu, Y., Siddique, A. R. M., Majid, S. H., Biglarbegian, M., Gadsden, S. A., & Mahmud, S. (2019) · Energy Reports · doi:10.1016/j.egyr.2019.06.016 · Cited by 374
Heat dissipation design for lithium-ion batteries
Wu, M.-S., Liu, K. H., Wang, Y.-Y., & Wan, C.-C. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00048-4 · Cited by 373
Samimi, F., Babapoor, A., Azizi, M., & Karimi, G. (2016) · Energy · doi:10.1016/j.energy.2015.12.064 · Cited by 372
Heat transfer and thermal management with PCMs in a Li-ion battery cell for electric vehicles
Javani, N., Dincer, I., Naterer, G. F., & Yilbas, B. S. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2013.12.076 · Cited by 370
Liang, J., Gan, Y., & Li, Y. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.10.063 · Cited by 367
Ping, P., Peng, R., Kong, D., Chen, G., & Wen, J. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.09.025 · Cited by 366
Behi, H., Karimi, D., Behi, M., Ghanbarpour, M., Jaguemont, J., Sokkeh, M. A., Gandoman, F. H., Berecibar, M., & Van Mierlo, J. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115280 · Cited by 365
Thermal Modeling of Porous Insertion Electrodes
Thomas, K. E., & Newman, J. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1531194 · Cited by 356
Zhao, R., Zhang, S., Liu, J., & Gu, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.09.001 · Cited by 343
Thermal management for high power lithium-ion battery by minichannel aluminum tubes
Lan, C., Xu, J., Qiao, Y., & Ma, Y. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.02.070 · Cited by 336
Heat transfer in phase change materials for thermal management of electric vehicle battery modules
Duan, X., & Naterer, G. F. (2010) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2010.07.044 · Cited by 335
Jiang, G., Huang, J., Fu, Y., Cao, M., & Liu, M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.07.197 · Cited by 335
Zhao, R., Gu, J., & Liu, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.007 · Cited by 332
Experimental investigation on EV battery cooling and heating by heat pipes
Wang, Q., Jiang, B., Xue, Q. F., Sun, H. L., Li, B., Zou, H. M., & Yan, Y. Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.09.083 · Cited by 329
Phase Change Materials (PCM) for Solar Energy Usages and Storage: An Overview
Mofijur, M., Mahlia, T., Silitonga, A., Ong, H., Silakhori, M., Hasan, M., Putra, N., & Rahman, S. M. (2019) · Energies · doi:10.3390/en12163167 · Cited by 329
Al-Hallaj, S., & Selman, J. R. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00196-9 · Cited by 325
Ling, Z., Chen, J., Fang, X., Zhang, Z., Xu, T., Gao, X., & Wang, S. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.01.075 · Cited by 311
Bai, F., Chen, M., Song, W., Feng, Z., Li, Y., & Ding, Y. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.07.141 · Cited by 303
Battery thermal management system for electric vehicle using heat pipes
Smith, J., Singh, R., Hinterberger, M., & Mochizuki, M. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2018.08.022 · Cited by 303
Zhao, J., Rao, Z., Huo, Y., Liu, X., & Li, Y. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.04.012 · Cited by 296
Hussain, A., Abidi, I. H., Tso, C. Y., Chan, K. C., Luo, Z., & Chao, C. Y. H. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.09.019 · Cited by 293
Zhao, R. L., Liu, J., & Gu, J. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.11.051 · Cited by 289
Thermal management of the lithium-ion battery by the composite PCM-Fin structures
Sun, Z., Fan, R., Yan, F., Zhou, T., & Zheng, N. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118739 · Cited by 288
Qin, P., Liao, M., Zhang, D., Liu, Y., Sun, J., & Wang, Q. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.05.084 · Cited by 284
Thermal analysis and two-directional air flow thermal management for lithium-ion battery pack
Yu, K., Yang, X., Cheng, Y., & Li, C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.086 · Cited by 282
Lv, Y., Yang, X., Li, X., Zhang, G., Wang, Z., & Yang, C. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.06.058 · Cited by 282
Experimental investigation on the feasibility of heat pipe cooling for HEV/EV lithium-ion battery
Tran, T.-H., Harmand, S., Desmet, B., & Filangi, S. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.11.048 · Cited by 279
Bhamare, D. K., Rathod, M. K., & Banerjee, J. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2019.06.023 · Cited by 277
Self-citationHuang, Q., Li, X., Zhang, G., Zhang, J., He, F., & Li, Y. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.06.048 · Cited by 276
Copper foam/PCMs based heat sinks: An experimental study for electronic cooling systems
Rehman, T.-U., Ali, H. M., Saieed, A., Pao, W., & Ali, M. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.07.120 · Cited by 274
Battery thermal management system employing phase change material with cell-to-cell air cooling
Jilte, R. D., Kumar, R., Ahmadi, M. H., & Chen, L. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114199 · Cited by 272
Structural optimization of lithium-ion battery pack with forced air cooling system
Xie, J., Ge, Z., Zang, M., & Wang, S. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.07.143 · Cited by 271
Zhao, J., Lv, P., & Rao, Z. (2017) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2016.11.017 · Cited by 270
Wu, W., Yang, X., Zhang, G., Ke, X., Wang, Z., Situ, W., Li, X., & Zhang, J. (2016) · Energy · doi:10.1016/j.energy.2016.07.119 · Cited by 266
Lin, C., Xu, S., Chang, G., & Liu, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.068 · Cited by 263
Wang, T., Tseng, K. J., & Zhao, J. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.07.033 · Cited by 259
Fathabadi, H. (2014) · Energy · doi:10.1016/j.energy.2014.04.046 · Cited by 258
Alipanah, M., & Li, X. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.07.010 · Cited by 257
Electrical characteristics of 18650 Li-ion cells at low temperatures
Nagasubramanian, G. (2001) · Journal of Applied Electrochemistry · doi:10.1023/a:1004113825283 · Cited by 254
Safdari, M., Ahmadi, R., & Sadeghzadeh, S. (2019) · Energy · doi:10.1016/j.energy.2019.116840 · Cited by 250
Modeling of passive thermal management for electric vehicle battery packs with PCM between cells
Javani, N., Dincer, I., Naterer, G. F., & Rohrauer, G. L. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.07.037 · Cited by 249
Development of cooling strategy for an air cooled lithium-ion battery pack
Sun, H., & Dixon, R. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.107 · Cited by 249
Smart, M. C., Ratnakumar, B. V., Whitcanack, L. D., Chin, K. B., Surampudi, S., Croft, H., Tice, D., & Staniewicz, R. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00154-x · Cited by 247
Azizi, Y., & Sadrameli, S. M. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.09.081 · Cited by 246
Park, S., & Jung, D. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.11.039 · Cited by 243
In Situ Measurement of Radial Temperature Distributions in Cylindrical Li-Ion Cells
Zhang, G., Cao, L., Ge, S., Wang, C.-Y., Shaffer, C. E., & Rahn, C. D. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0051410jes · Cited by 238
Research on the heat dissipation performance of battery pack based on forced air cooling
Xu, X. M., & He, R. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.004 · Cited by 237
Qu, Z. G., Li, W. Q., & Tao, W. Q. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2013.12.136 · Cited by 230
Lv, Y., Liu, G., Zhang, G., & Yang, X. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228398 · Cited by 227
Zhang, W., Qiu, J., Yin, X., & Wang, D. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114571 · Cited by 226
Hong, S., Zhang, X., Chen, K., & Wang, S. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.09.092 · Cited by 223
Experimental performances of a battery thermal management system using a phase change material
Hémery, C.-V., Pra, F., Robin, J.-F., & Marty, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.147 · Cited by 220
Greco, A., Jiang, X., & Cao, D. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.12.027 · Cited by 219
Dan, D., Yao, C., Zhang, Y., Zhang, H., Zeng, Z., & Xu, X. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114183 · Cited by 219
Mehrabi-Kermani, M., Houshfar, E., & Ashjaee, M. (2019) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2019.03.026 · Cited by 217
Wang, Q., Rao, Z., Huo, Y., & Wang, S. (2016) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2015.11.005 · Cited by 213
Optimization of the internal fin in a phase-change-material module for battery thermal management
Weng, J., Ouyang, D., Yang, X., Chen, M., Zhang, G., & Wang, J. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114698 · Cited by 211
Wang, J., Gan, Y., Liang, J., Tan, M., & Li, Y. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.02.036 · Cited by 209
Huang, Y.-H., Cheng, W.-L., & Zhao, R. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.12.064 · Cited by 207
Ling, Z., Cao, J., Zhang, W., Zhang, Z., Fang, X., & Gao, X. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.06.143 · Cited by 205
Zou, D., Liu, X., He, R., Zhu, S., Bao, J., Guo, J., Hu, Z., & Wang, B. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.11.064 · Cited by 204
Numerical study on the thermal performance of a composite board in battery thermal management system
Yan, J., Wang, Q., Li, K., & Sun, J. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.05.187 · Cited by 202
Karimi, G., Azizi, M., & Babapoor, A. (2016) · Journal of Energy Storage · doi:10.1016/j.est.2016.08.005 · Cited by 202
Spent lead-acid battery recycling in China – A review and sustainable analyses on mass flow of lead
Sun, Z., Cao, H., Zhang, X., Lin, X., Zheng, W., Cao, G., Sun, Y., & Zhang, Y. (2017) · Waste Management · doi:10.1016/j.wasman.2017.03.007 · Cited by 201
Song, L., Zhang, H., & Yang, C. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.12.157 · Cited by 201
Lazrak, A., Fourmigué, J.-F., & Robin, J.-F. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.08.172 · Cited by 200
Thermal–electrochemical model for passive thermal management of a spiral-wound lithium-ion battery
Somasundaram, K., Birgersson, E., & Mujumdar, A. S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.11.075 · Cited by 196
Liu, F., Lan, F., & Chen, J. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.108 · Cited by 195
Gan, Y., Wang, J., Liang, J., Huang, Z., & Hu, M. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114523 · Cited by 194
Zhang, J., Li, X., Zhang, G., Wang, Y., Guo, J., Wang, Y., Huang, Q., Xiao, C., & Zhong, Z. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112319 · Cited by 192
Tran, T.-H., Harmand, S., & Sahut, B. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.130 · Cited by 191
He, J., Yang, X., & Zhang, G. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.11.100 · Cited by 188
Cao, J., Luo, M., Fang, X., Ling, Z., & Zhang, Z. (2019) · Energy · doi:10.1016/j.energy.2019.116565 · Cited by 188
Cao, J., Ling, Z., Fang, X., & Zhang, Z. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.227673 · Cited by 188
Li, D., Wang, J., Ding, Y., Yao, H., & Huang, Y. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.12.040 · Cited by 186
Feng, X., Xu, C., He, X., Wang, L., Zhang, G., & Ouyang, M. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.09.003 · Cited by 185
Feng, L., Zhou, S., Li, Y., Wang, Y., Zhao, Q., Luo, C., Wang, G., & Yan, K. (2018) · Journal of Energy Storage · doi:10.1016/j.est.2018.01.001 · Cited by 182
An, Z., Chen, X., Zhao, L., & Gao, Z. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114345 · Cited by 182
Weng, J., He, Y., Ouyang, D., Yang, X., Zhang, G., & Wang, J. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112106 · Cited by 181
Rao, Z., Huo, Y., Liu, X., & Zhang, G. (2015) · Journal of the Energy Institute · doi:10.1016/j.joei.2014.09.006 · Cited by 179
Hekmat, S., & Molaeimanesh, G. R. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114759 · Cited by 179
Weng, J., Yang, X., Zhang, G., Ouyang, D., Chen, M., & Wang, J. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.04.050 · Cited by 176
Zhao, R., Gu, J., & Liu, J. (2017) · Energy · doi:10.1016/j.energy.2017.06.168 · Cited by 172
Luo, X., Guo, Q., Li, X., Tao, Z., Lei, S., Liu, J., Kang, L., Zheng, D., & Liu, Z. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.07.112 · Cited by 170
Lei, S., Shi, Y., & Chen, G. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114792 · Cited by 170
Huo, Y., & Rao, Z. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.07.128 · Cited by 167
Shon, J., Kim, H., & Lee, K. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.07.049 · Cited by 167
Solid-State Thermal Management for Lithium-Ion EV Batteries
Alaoui, C. (2013) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2214246 · Cited by 166
Investigation of the thermal performance of axial-flow air cooling for the lithium-ion battery pack
Yang, T., Yang, N., Zhang, X., & Li, G. (2016) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2016.05.009 · Cited by 166
Joshy, N., Hajiyan, M., Siddique, A. R. M., Tasnim, S., Simha, H., & Mahmud, S. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.227717 · Cited by 163
Experimental study of an OHP-cooled thermal management system for electric vehicle power battery
Rao, Z., Huo, Y., & Liu, X. (2014) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2014.03.017 · Cited by 162
Applications and thermal management of rechargeable batteries for industrial applications
Jouhara, H., Khordehgah, N., Serey, N., Almahmoud, S., Lester, S. P., Machen, D., & Wrobel, L. C. (2019) · Energy · doi:10.1016/j.energy.2018.12.218 · Cited by 161
Yan, J., Li, K., Chen, H., Wang, Q., & Sun, J. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.09.058 · Cited by 157
Wei, A., Qu, J., Qiu, H., Wang, C., & Cao, G. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.02.021 · Cited by 148
Thermal management of batteries employing active temperature control and reciprocating cooling flow
He, F., & Ma, L. (2014) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2014.11.079 · Cited by 146
Jouhara, H., Serey, N., Khordehgah, N., Bennett, R. G., Almahmoud, S., & Lester, S. P. (2019) · International Journal of Thermofluids · doi:10.1016/j.ijft.2019.100004 · Cited by 144
Xie, Y., Tang, J., Shang, S., Xing, Y., Wu, H., Hu, Z., & Wen, D. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.11.046 · Cited by 141
Liang, J., Gan, Y., Li, Y., et al. (2019) · Energy · doi:10.1016/j.energy.2019.116233 · Cited by 140
Experimental study on heat dissipation for lithium-ion battery based on micro heat pipe array (MHPA)
Ye, X., Zhao, Y., & Quan, Z. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.10.141 · Cited by 136
Situ, W., Zhang, G., Li, X., Yang, X., Wei, C., Rao, M., Wang, Z., Wang, C., & Wu, W. (2017) · Energy · doi:10.1016/j.energy.2017.09.083 · Cited by 134
Cooling Li-ion batteries of racing solar car by using multiple phase change materials
Moraga, N. O., Xamán, J., & Araya, R. H. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.07.183 · Cited by 124
Life cycle inventory of recycling portable nickel–cadmium batteries
Rydh, C. J., & Karlström, M. (2002) · Resources Conservation and Recycling · doi:10.1016/s0921-3449(01)00114-8 · Cited by 123
Malik, M., Dinçer, İ., Rosen, M. A., & Fowler, M. W. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.10.051 · Cited by 119
Thermal analysis of high-power lithium-ion battery packs using flow network approach
Karimi, G., & Dehghan, A. R. (2014) · International Journal of Energy Research · doi:10.1002/er.3173 · Cited by 118
Heat transfer and thermal management of electric vehicle batteries with phase change materials
Ramandi, M. Y., Dinçer, İ., & Naterer, G. F. (2011) · Heat and Mass Transfer · doi:10.1007/s00231-011-0766-z · Cited by 114
Pan, M., & Zhong, Y. (2018) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2018.06.014 · Cited by 111
Yang, H., Zhang, H., Sui, Y., & Yang, C. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.09.022 · Cited by 110
Huo, Y., & Rao, Z. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.12.009 · Cited by 109
Myo-inositol based nano-PCM for solar thermal energy storage
Singh, D., Suresh, S., Singh, H., Rose, B. A. J., Tassou, S. A., & Anantharaman, N. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.08.202 · Cited by 107
Qu, J., Wang, C., Li, X., & Wang, H. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.02.045 · Cited by 105
Zhong, G., Zhang, G., Yang, X., Li, X., Wang, Z., Yang, C., Yang, C., & Gao, G. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.08.022 · Cited by 93
Du, X., Qian, Z., Chen, Z., & Rao, Z. (2018) · International Journal of Energy Research · doi:10.1002/er.4067 · Cited by 93
Zhao, Y., Li, Q., Zou, B., Zhang, T., Jin, L., Qiao, G., Nie, B., Huang, Y., & Ding, Y. (2020) · International Journal of Energy Research · doi:10.1002/er.5254 · Cited by 93
High-energy electrode investigation for plug-in hybrid electric vehicles
Lu, W., Jansen, A. N., Dees, D. W., Nelson, P. A., Veselka, N. R., & Henriksen, G. L. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.08.117 · Cited by 83
Li, J., Huang, J., & Cao, M. L. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.12.023 · Cited by 83
Liu, Y., Yang, S., Guo, B., & Deng, C. L. (2014) · Advances in Mechanical Engineering · doi:10.1155/2014/852712 · Cited by 82
Thermal charging performance of enhanced phase change material composites for thermal battery design
Mallow, A., Abdelaziz, O. A., & Graham, S. L. (2018) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2017.12.027 · Cited by 82
Ji, C., Wang, B., Wang, S., Pan, S., Wang, D., Qi, P., & Zhang, K. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.04.093 · Cited by 66
Zhao, J., Wu, C., & Rao, Z. (2020) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2020.115304 · Cited by 65
Alshaer, W. G., Rady, M., Nada, S. A., del Barrio, E. P., & Sommier, A. (2016) · Heat and Mass Transfer · doi:10.1007/s00231-016-1815-4 · Cited by 62
Yamada, T., KOSHIYAMA, T., YOSHIKAWA, M., Yamada, T., & Ono, N. (2017) · Journal of Thermal Science and Technology · doi:10.1299/jtst.2017jtst0011 · Cited by 62
Gou, J., Liu, W., & Luo, Y. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114102 · Cited by 57
Plate flat heat pipe and liquid-cooled coupled multistage heat dissipation system of Li-ion battery
Xu, X., Tang, W., Fu, J., Li, R., & Sun, X. (2018) · International Journal of Energy Research · doi:10.1002/er.4341 · Cited by 47
Wang, Z., He, W., Zhang, X., Yue, Y., Liu, J., Zhang, C., & Fang, L. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.08.078 · Cited by 45
Yang, M., Wang, H., Shuai, W., & Deng, X. (2019) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2019.114141 · Cited by 44
Zhu, W. H., Yang, H., Webb, K., et al. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.11.043 · Cited by 39
Heat‐pipe‐based thermal management and temperature characteristics of Li‐ion batteries
Yuan, W., Yan, Z., Tan, Z., Chen, W., & Tang, Y. Z. (2016) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.22566 · Cited by 37
Nano-glass ceramic cathodes for Li+/Na+ mixed-ion batteries
He, W., Zhang, X., Jin, C., Wang, Y., Mossin, S., & Yue, Y. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.12.118 · Cited by 35
Esfahanian, V., Renani, S. A., Nehzati, H., Mirkhani, N., Esfahanian, M., Yaghoobi, O., & Safaei, A. (2012) · Lecture notes in electrical engineering · doi:10.1007/978-3-642-33777-2_37 · Cited by 28
Soltani, M., Telmoudi, A. J., Belgacem, Y. B., & Châari, A. (2019) · Neural Computing and Applications · doi:10.1007/s00521-019-04631-w · Cited by 22
Cited by
Prussian Blue Analogues for Sodium‐Ion Batteries: Past, Present, and Future
Peng, J., Zhang, W., Liu, Q., Wang, J., Chou, S., Liu, H., & Dou, S. (2022) · Advanced Materials · doi:10.1002/adma.202108384 · Cited by 849
Luo, J., Zou, D., Wang, Y., Wang, S., & Huang, L. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132741 · Cited by 813
Kumar, R. R., Bharatiraja, C., Udhayakumar, K., Devakirubakaran, S., Sekar, K. S., & Mihet-Popa, L. (2023) · IEEE Access · doi:10.1109/access.2023.3318121 · Cited by 471
Advances in thermal energy storage: Fundamentals and applications
Ali, H. M., Rehman, T.-U., Arıcı, M., Said, Z., Duraković, B., Mohammed, H. I., Kumar, R., Rathod, M. K., Buyukdagli, O., & Teggar, M. (2024) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101109 · Cited by 457
Self-citationZhao, G., Wang, X., Negnevitsky, M., & Li, C. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2022.119626 · Cited by 395
Metadata
- Authors
- Patel, J. R., & Rathod, M. K.
- Venue
- Journal of Power Sources
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 480
- Pages
- 228820
- ISSN
- 0378-7753 (ISSN-L)
- OpenAlex
- W3081566847
- Cited by
- 276
- References
- 178
- FWCI
- 11.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.