The DOI matches its Crossref record; 193 of the 193 references it cites were found in a registry or an index.
Advances and challenges to the commercialization of organic–inorganic halide perovskite solar cell technology
Open accessAbstract
When transferring photovoltaic technologies from laboratory-scale fabrication to industrial applications, low cost, large area, high throughput, high solar-to-energy power conversion efficiency, long lifetime, and low toxicity are crucial attributes. In recent years, organic–inorganic halide perovskite solar cells have emerged as a promising high-performance, cost-effective solar cell technology. However, most of the best reported efficiencies have been obtained on small active-area devices (∼0.1 cm2). Therefore, development of protocols to industrialize such a technology is of paramount importance. In this article, we review the progress of perovskite solar cells with a particular emphasis on fabrication processes and instrumentation that have scale-up potential. For successful commercialization, the capacity to fabricate large-area modules is essential. Long-term stability is discussed, focusing on lifetime measurement and quantification protocols for commercialization. Cost-performance and life-cycle assessment analysis based on recently reported state-of-the-art perovskite solar cells are discussed. These analyses offer insights regarding required efficiency, module area size, and lifetime, in order for perovskite solar cells to be competitive with existing photovoltaic technologies. Finally, lead toxicity and possible solutions to this issue will be discussed. In the outlook, we outline future research directions based on reported results and trends in the field.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Hazards of heavy metal contamination
Järup, L. (2003) · British Medical Bulletin · doi:10.1093/bmb/ldg032 · Cited by 6,508
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
The path towards sustainable energy
Chu, S., Cui, Y., & Liu, N. (2017) · Nature Materials · doi:10.1038/nmat4834 · Cited by 4,791
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
Nie, W., Tsai, H., Asadpour, R., Blancon, J.-C., Neukirch, A. J., Gupta, G., Crochet, J. J., Chhowalla, M., Tretiak, S., Alam, M. A., et al. (2015) · Science · doi:10.1126/science.aaa0472 · Cited by 3,295
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Organic–Inorganic Perovskites: Structural Versatility for Functional Materials Design
Saparov, B., & Mitzi, D. B. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00715 · Cited by 2,907
Efficient and stable solution-processed planar perovskite solar cells via contact passivation
Tan, H., Jain, A., Voznyy, O., Lan, X., García de Arquer, F. P., Fan, J. Z., Quintero-Bermudez, R., Yuan, M., Zhang, B., Zhao, Y., et al. (2017) · Science · doi:10.1126/science.aai9081 · Cited by 2,342
Ahn, N., Son, D.-Y., Jang, I.-H., Kang, S. M., Choi, M., & Park, N.-G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04930 · Cited by 2,312
Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers
Chen, W., Wu, Y., Yue, Y., Liu, J., Zhang, W., Yang, X., Chen, H., Bi, E., Ashraful, I., Grätzel, M., et al. (2015) · Science · doi:10.1126/science.aad1015 · Cited by 2,279
Slavney, A. H., Hu, T., Lindenberg, A. M., & Karunadasa, H. I. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b13294 · Cited by 2,204
2D Homologous Perovskites as Light-Absorbing Materials for Solar Cell Applications
Cao, D. H., Stoumpos, C. C., Farha, O. K., Hupp, J. T., & Kanatzidis, M. G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b03796 · Cited by 2,158
Toxicity of lead: a review with recent updates
Flora, G., Gupta, D., & Tiwari, A. (2012) · Interdisciplinary Toxicology · doi:10.2478/v10102-012-0009-2 · Cited by 2,144
Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers
You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123
One-Year stable perovskite solar cells by 2D/3D interface engineering
Grancini, G., Roldán-Carmona, C., Zimmermann, I., Mosconi, E., Lee, X., Martineau, D., Narbey, S., Oswald, F., De Angelis, F., Graetzel, M., et al. (2017) · Nature Communications · doi:10.1038/ncomms15684 · Cited by 2,068
Jiang, Q., Zhang, L., Wang, H., Yang, X., Meng, J., Liu, H., Yin, Z., Wu, J., Zhang, X., & You, J. (2016) · Nature Energy · doi:10.1038/nenergy.2016.177 · Cited by 2,024
A Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406466 · Cited by 2,011
Eperon, G. E., Burlakov, V. M., Docampo, P., Goriely, A., & Snaith, H. J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302090 · Cited by 1,982
Review of recent progress in chemical stability of perovskite solar cells
Niu, G., Guo, X., & Wang, L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04994b · Cited by 1,965
A vacuum flash–assisted solution process for high-efficiency large-area perovskite solar cells
Li, X., Bi, D., Yi, C., Décoppet, J.-D., Luo, J., Zakeeruddin, S. M., Hagfeldt, A., & Grätzel, M. (2016) · Science · doi:10.1126/science.aaf8060 · Cited by 1,915
Leijtens, T., Eperon, G. E., Pathak, S., Abate, A., Lee, M. M., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3885 · Cited by 1,867
Efficient luminescent solar cells based on tailored mixed-cation perovskites
Bi, D., Tress, W., Dar, M. I., Gao, P., Luo, J., Renevier, C., Schenk, K., Abate, A., Giordano, F., Correa Baena, J.-P., et al. (2016) · Science Advances · doi:10.1126/sciadv.1501170 · Cited by 1,864
Organometal halide perovskite solar cells: degradation and stability
Berhe, T. A., Su, W.-N., Chen, C.-H., Pan, C.-J., Cheng, J.-H., Chen, H.-M., Tsai, M.-C., Chen, L.-Y., Dubale, A. A., & Hwang, B.-J. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02733k · Cited by 1,779
Xiao, Z., Dong, Q., Bi, C., Shao, Y., Yuan, Y., & Huang, J. (2014) · Advanced Materials · doi:10.1002/adma.201401685 · Cited by 1,703
Cs2AgBiX6 (X = Br, Cl): New Visible Light Absorbing, Lead-Free Halide Perovskite Semiconductors
McClure, E. T., Ball, M. R., Windl, W., & Woodward, P. M. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b04231 · Cited by 1,674
Xiao, M., Huang, F., Huang, W., Dkhissi, Y., Zhu, Y., Etheridge, J., Gray‐Weale, A., Bach, U., Cheng, Y., & Spiccia, L. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405334 · Cited by 1,630
23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability
Bush, K. A., Palmstrom, A. F., Yu, Z. J., Boccard, M., Cheacharoen, R., Mailoa, J. P., McMeekin, D. P., Hoye, R. L. Z., Bailie, C. D., Leijtens, T., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.9 · Cited by 1,545
Toxicity of organometal halide perovskite solar cells
Babayigit, A., Ethirajan, A., Muller, M., & Conings, B. (2016) · Nature Materials · doi:10.1038/nmat4572 · Cited by 1,533
Perovskite solar cells employing organic charge-transport layers
Malinkiewicz, O., Yella, A., Lee, Y. H., Espallargas, G. M., Graetzel, M., Nazeeruddin, M. K., & Bolink, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.341 · Cited by 1,474
Liang, P., Liao, C., Chueh, C., Zuo, F., Williams, S. T., Xin, X., Lin, J., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201400231 · Cited by 1,452
Wang, Z., Lin, Q., Chmiel, F. P., Sakai, N., Herz, L. M., & Snaith, H. J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.135 · Cited by 1,409
Yuan, Y., Giri, G., Ayzner, A. L., Zoombelt, A. P., Mannsfeld, S. C. B., Chen, J., Nordlund, D., Toney, M. F., Huang, J., & Bao, Z. (2014) · Nature Communications · doi:10.1038/ncomms4005 · Cited by 1,360
A2B′B″O6 perovskites: A review
Vasala, S., & Karppinen, M. (2015) · Progress in Solid State Chemistry · doi:10.1016/j.progsolidstchem.2014.08.001 · Cited by 1,336
Stability of Metal Halide Perovskite Solar Cells
Leijtens, T., Eperon, G. E., Noel, N. K., Habisreutinger, S. N., Petrozza, A., & Snaith, H. J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500963 · Cited by 1,308
Bismuth Based Hybrid Perovskites A3Bi2I9 (A: Methylammonium or Cesium) for Solar Cell Application
Park, B., Philippe, B., Zhang, X., Rensmo, H., Boschloo, G., & Johansson, E. M. J. (2015) · Advanced Materials · doi:10.1002/adma.201501978 · Cited by 1,269
Highly efficient planar perovskite solar cells through band alignment engineering
Correa Baena, J. P., Steier, L., Tress, W., Saliba, M., Neutzner, S., Matsui, T., Giordano, F., Jacobsson, T. J., Srimath Kandada, A. R., Zakeeruddin, S. M., et al. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02608c · Cited by 1,265
Not All That Glitters Is Gold: Metal-Migration-Induced Degradation in Perovskite Solar Cells
Domanski, K., Correa-Baena, J.-P., Mine, N., Nazeeruddin, M. K., Abate, A., Saliba, M., Tress, W., Hagfeldt, A., & Grätzel, M. (2016) · ACS Nano · doi:10.1021/acsnano.6b02613 · Cited by 1,245
Xiao, Z., Bi, C., Shao, Y., Dong, Q., Wang, Q., Yuan, Y., Wang, C., Gao, Y., & Huang, J. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01138d · Cited by 1,234
Heo, J. H., Han, H. J., Kim, D., Ahn, T. K., & Im, S. H. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00120j · Cited by 1,187
Travis, W., Glover, E. N. K., Bronstein, H., Scanlon, D. O., & Palgrave, R. G. (2016) · Chemical Science · doi:10.1039/c5sc04845a · Cited by 1,172
Colloidally prepared La-doped BaSnO 3 electrodes for efficient, photostable perovskite solar cells
Shin, S. S., Yeom, E. J., Yang, W. S., Hur, S., Kim, M. G., Im, J., Seo, J., Noh, J. H., & Seok, S. I. (2017) · Science · doi:10.1126/science.aam6620 · Cited by 1,163
Under the spotlight: The organic–inorganic hybrid halide perovskite for optoelectronic applications
Chen, Q., De Marco, N., Yang, Y. (., Song, T.-B., Chen, C.-C., Zhao, H., Hong, Z., Zhou, H., & Yang, Y. (2015) · Nano Today · doi:10.1016/j.nantod.2015.04.009 · Cited by 1,154
Lead-Free Halide Double Perovskites via Heterovalent Substitution of Noble Metals
Volonakis, G., Filip, M. R., Haghighirad, A. A., Sakai, N., Wenger, B., Snaith, H. J., & Giustino, F. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00376 · Cited by 1,146
Needleman, H. (2004) · Annual Review of Medicine · doi:10.1146/annurev.med.55.091902.103653 · Cited by 1,144
Toward Lead-Free Perovskite Solar Cells
Giustino, F., & Snaith, H. J. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00499 · Cited by 1,141
Steric engineering of metal-halide perovskites with tunable optical band gaps
Filip, M. R., Eperon, G. E., Snaith, H. J., & Giustino, F. (2014) · Nature Communications · doi:10.1038/ncomms6757 · Cited by 1,081
Han, Y., Meyer, S., Dkhissi, Y., Weber, K., Pringle, J. M., Bach, U., Spiccia, L., & Cheng, Y.-B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00358j · Cited by 1,002
Consensus stability testing protocols for organic photovoltaic materials and devices
Reese, M. O., Gevorgyan, S. A., Jørgensen, M., Bundgaard, E., Kurtz, S. R., Ginley, D. S., Olson, D. C., Lloyd, M. T., Morvillo, P., Katz, E. A., et al. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.01.036 · Cited by 989
Dualeh, A., Tétreault, N., Moehl, T., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201304022 · Cited by 967
Toward Large Scale Roll‐to‐Roll Production of Fully Printed Perovskite Solar Cells
Hwang, K., Jung, Y., Heo, Y., Scholes, F. H., Watkins, S. E., Subbiah, J., Jones, D. J., Kim, D., & Vak, D. (2015) · Advanced Materials · doi:10.1002/adma.201404598 · Cited by 930
Zhang, W., Saliba, M., Moore, D. T., Pathak, S. K., Hörantner, M. T., Stergiopoulos, T., Stranks, S. D., Eperon, G. E., Alexander-Webber, J. A., Abate, A., et al. (2015) · Nature Communications · doi:10.1038/ncomms7142 · Cited by 920
(2020) · INDIGO (University of Illinois at Chicago) · doi:10.1021/jacs.5b13294.s002 · Cited by 892
Ku, Z., Rong, Y., Xu, M., Liu, T., & Han, H. (2013) · Scientific Reports · doi:10.1038/srep03132 · Cited by 877
Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers
Bella, F., Griffini, G., Correa-Baena, J.-P., Saracco, G., Grätzel, M., Hagfeldt, A., Turri, S., & Gerbaldi, C. (2016) · Science · doi:10.1126/science.aah4046 · Cited by 870
Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide
Anaraki, E. H., Kermanpur, A., Steier, L., Domanski, K., Matsui, T., Tress, W., Saliba, M., Abate, A., Grätzel, M., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02390h · Cited by 848
Kato, Y., Ono, L. K., Lee, M. V., Wang, S., Raga, S. R., & Qi, Y. (2015) · Advanced Materials Interfaces · doi:10.1002/admi.201500195 · Cited by 844
Self-citationAn extended Tolerance Factor approach for organic–inorganic perovskites
Kieslich, G., Sun, S., & Cheetham, A. K. (2015) · Chemical Science · doi:10.1039/c5sc00961h · Cited by 798
Efficient planar heterojunction mixed-halide perovskite solar cells deposited via spray-deposition
Barrows, A. T., Pearson, A. J., Kwak, C. K., Dunbar, A. D. F., Buckley, A. R., & Lidzey, D. G. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01546k · Cited by 765
Juarez-Perez, E. J., Hawash, Z., Raga, S. R., Ono, L. K., & Qi, Y. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02016j · Cited by 761
Self-citationXiao, Z., Meng, W., Wang, J., Mitzi, D. B., & Yan, Y. (2017) · Materials Horizons · doi:10.1039/c6mh00519e · Cited by 735
Lee, B., Stoumpos, C. C., Zhou, N., Hao, F., Malliakas, C., Yeh, C.-Y., Marks, T. J., Kanatzidis, M. G., & Chang, R. P. H. (2014) · Journal of the American Chemical Society · doi:10.1021/ja508464w · Cited by 721
Deng, Y., Peng, E., Shao, Y., Xiao, Z., Dong, Q., & Huang, J. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03907f · Cited by 719
Energy conversion approaches and materials for high-efficiency photovoltaics
Green, M. A., & Bremner, S. P. (2017) · Nature Materials · doi:10.1038/nmat4676 · Cited by 685
A Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie · doi:10.1002/ange.201406466 · Cited by 684
Benefits of very thin PCBM and LiF layers for solution-processed p–i–n perovskite solar cells
Seo, J., Park, S., Chan Kim, Y., Jeon, N. J., Noh, J. H., Yoon, S. C., & Seok, S. I. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01216j · Cited by 677
Wang, S., Jiang, Y., Juarez-Perez, E. J., Ono, L. K., & Qi, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.195 · Cited by 661
Self-citationHigh performance hybrid solar cells sensitized by organolead halide perovskites
Cai, B., Xing, Y., Yang, Z., Zhang, W.-H., & Qiu, J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40343b · Cited by 655
Solar cell efficiency tables (version 49)
Green, M. A., Emery, K. A., Hishikawa, Y., et al. (2016) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.2855 · Cited by 648
Qualifying composition dependent p and n self-doping in CH3NH3PbI3
Wang, Q., Shao, Y., Xie, H., Lyu, L., Liu, X., Gao, Y., & Huang, J. (2014) · Applied Physics Letters · doi:10.1063/1.4899051 · Cited by 645
Wu, Y., Yang, X., Chen, W., Yue, Y., Cai, M., Xie, F., Bi, E., Islam, A., & Han, L. (2016) · Nature Energy · doi:10.1038/nenergy.2016.148 · Cited by 644
Wu, Y., Xie, F., Chen, H., Yang, X., Su, H., Cai, M., Zhou, Z., Noda, T., & Han, L. (2017) · Advanced Materials · doi:10.1002/adma.201701073 · Cited by 634
Origin of the Thermal Instability in CH3NH3PbI3 Thin Films Deposited on ZnO
Yang, J., Siempelkamp, B. D., Mosconi, E., De Angelis, F., & Kelly, T. L. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b01598 · Cited by 629
Perovskite photovoltaics: life-cycle assessment of energy and environmental impacts
Gong, J., Darling, S. B., & You, F. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00615e · Cited by 619
Perovskite ink with wide processing window for scalable high-efficiency solar cells
Yang, M., Li, Z., Reese, M. O., Reid, O. G., Kim, D. H., Siol, S., Klein, T. R., Yan, Y., Berry, J. J., van Hest, M. F. A. M., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.38 · Cited by 614
Assessing the toxicity of Pb- and Sn-based perovskite solar cells in model organism Danio rerio
Babayigit, A., Duy Thanh, D., Ethirajan, A., Manca, J., Muller, M., Boyen, H.-G., & Conings, B. (2016) · Scientific Reports · doi:10.1038/srep18721 · Cited by 609
Trapped charge-driven degradation of perovskite solar cells
Ahn, N., Kwak, K., Jang, M. S., Yoon, H., Lee, B. Y., Lee, J.-K., Pikhitsa, P. V., Byun, J., & Choi, M. (2016) · Nature Communications · doi:10.1038/ncomms13422 · Cited by 606
Stability of Perovskite Solar Cells: A Prospective on the Substitution of the A Cation and X Anion
Wang, Z., Shi, Z., Li, T., Chen, Y., & Huang, W. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201603694 · Cited by 595
Progress on Perovskite Materials and Solar Cells with Mixed Cations and Halide Anions
Ono, L. K., Juarez-Perez, E. J., & Qi, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06001 · Cited by 593
Self-citationLead-Free MA2CuClxBr4–x Hybrid Perovskites
Cortecchia, D., Dewi, H. A., Yin, J., Bruno, A., Chen, S., Baikie, T., Boix, P. P., Grätzel, M., Mhaisalkar, S., Soci, C., et al. (2016) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.5b01896 · Cited by 574
Can Pb-Free Halide Double Perovskites Support High-Efficiency Solar Cells?
Savory, C. N., Walsh, A., & Scanlon, D. O. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00471 · Cited by 554
Multifunctional Fullerene Derivative for Interface Engineering in Perovskite Solar Cells
Li, Y., Zhao, Y., Chen, Q., Yang, Y. (., Liu, Y., Hong, Z., Liu, Z., Hsieh, Y.-T., Meng, L., Li, Y., et al. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b10614 · Cited by 539
Hailegnaw, B., Kirmayer, S., Edri, E., Hodes, G., & Cahen, D. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00504 · Cited by 523
Momblona, C., Gil-Escrig, L., Bandiello, E., Hutter, E. M., Sessolo, M., Lederer, K., Blochwitz-Nimoth, J., & Bolink, H. J. (2016) · Energy Environ. Sci. · doi:10.1039/c6ee02100j · Cited by 514
Cost‐Performance Analysis of Perovskite Solar Modules
Cai, M., Wu, Y., Chen, H., Yang, X., Qiang, Y., & Han, L. (2016) · Advanced Science · doi:10.1002/advs.201600269 · Cited by 513
Heo, J. H., Song, D. H., & Im, S. H. (2014) · Advanced Materials · doi:10.1002/adma.201403140 · Cited by 497
Inverted Perovskite Solar Cells: Progresses and Perspectives
Liu, T., Chen, K., Hu, Q., Zhu, R., & Gong, Q. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600457 · Cited by 483
Wei, Z., Chen, H., Yan, K., & Yang, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201408638 · Cited by 456
Hawash, Z., Ono, L. K., & Qi, Y. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201700623 · Cited by 455
Self-citationEfficient perovskite solar cells by metal ion doping
Wang, J. T.-W., Wang, Z., Pathak, S., Zhang, W., deQuilettes, D. W., Wisnivesky-Rocca-Rivarola, F., Huang, J., Nayak, P. K., Patel, J. B., Mohd Yusof, H. A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01969b · Cited by 450
Thin-Film Deposition and Characterization of a Sn-Deficient Perovskite Derivative Cs2SnI6
Saparov, B., Sun, J.-P., Meng, W., Xiao, Z., Duan, H.-S., Gunawan, O., Shin, D., Hill, I. G., Yan, Y., & Mitzi, D. B. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b00433 · Cited by 434
Air-Exposure Induced Dopant Redistribution and Energy Level Shifts in Spin-Coated Spiro-MeOTAD Films
Hawash, Z., Ono, L. K., Raga, S. R., Lee, M. V., & Qi, Y. (2015) · Chemistry of Materials · doi:10.1021/cm504022q · Cited by 430
Self-citationNoel, N. K., Habisreutinger, S. N., Wenger, B., Klug, M. T., Hörantner, M. T., Johnston, M. B., Nicholas, R. J., Moore, D. T., & Snaith, H. J. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02373h · Cited by 413
Lead poisoning in a historical perspective
Hernberg, S. (2000) · American Journal of Industrial Medicine · doi:10.1002/1097-0274(200009)38:3<244::aid-ajim3>3.0.co;2-f · Cited by 409
Heterovalent Dopant Incorporation for Bandgap and Type Engineering of Perovskite Crystals
Abdelhady, A. L., Saidaminov, M. I., Murali, B., Adinolfi, V., Voznyy, O., Katsiev, K., Alarousu, E., Comin, R., Dursun, I., Sinatra, L., et al. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b02681 · Cited by 409
Perovskite Solar Cells: The Birth of a New Era in Photovoltaics
Green, M. A., & Ho-Baillie, A. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00137 · Cited by 409
Kwon, Y. S., Lim, J., Yun, H.-J., Kim, Y.-H., & Park, T. (2014) · Energy & Environmental Science · doi:10.1039/c3ee44174a · Cited by 403
Zhang, F., Shi, W., Luo, J., Pellet, N., Yi, C., Li, X., Zhao, X., Dennis, T. J. S., Li, X., Wang, S., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606806 · Cited by 390
UV Degradation and Recovery of Perovskite Solar Cells
Lee, S.-W., Kim, S., Bae, S., Cho, K., Chung, T., Mundt, L. E., Lee, S., Park, S., Park, H., Schubert, M. C., et al. (2016) · Scientific Reports · doi:10.1038/srep38150 · Cited by 387
Razza, S., Di Giacomo, F., Matteocci, F., Cinà, L., Palma, A. L., Casaluci, S., Cameron, P., D'Epifanio, A., Licoccia, S., Reale, A., et al. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.12.008 · Cited by 384
Chen, H., & Yang, S. (2017) · Advanced Materials · doi:10.1002/adma.201603994 · Cited by 384
Moore, D. T., Sai, H., Tan, K. W., Smilgies, D.-M., Zhang, W., Snaith, H. J., Wiesner, U., & Estroff, L. A. (2015) · Journal of the American Chemical Society · doi:10.1021/ja512117e · Cited by 380
Li, X., Tschumi, M., Han, H., Babkair, S. S., Alzubaydi, R. A., Ansari, A. A., Habib, S. S., Nazeeruddin, M. K., Zakeeruddin, S. M., & Grätzel, M. (2015) · Energy Technology · doi:10.1002/ente.201500045 · Cited by 379
Pathak, S. K., Abate, A., Ruckdeschel, P., Roose, B., Gödel, K. C., Vaynzof, Y., Santhala, A., Watanabe, S., Hollman, D. J., Noel, N., et al. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401658 · Cited by 376
C60 as an Efficient n-Type Compact Layer in Perovskite Solar Cells
Wojciechowski, K., Leijtens, T., Siprova, S., Schlueter, C., Hörantner, M. T., Wang, J. T.-W., Li, C.-Z., Jen, A. K.-Y., Lee, T.-L., & Snaith, H. J. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00902 · Cited by 374
Methylammonium Bismuth Iodide as a Lead‐Free, Stable Hybrid Organic–Inorganic Solar Absorber
Hoye, R. L. Z., Brandt, R. E., Osherov, A., Stevanović, V., Stranks, S. D., Wilson, M. W. B., Kim, H., Akey, A. J., Perkins, J. D., Kurchin, R. C., et al. (2016) · Chemistry – A European Journal · doi:10.1002/chem.201505055 · Cited by 368
Kim, J. H., Williams, S. T., Cho, N., Chueh, C., & Jen, A. K. ‐. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401229 · Cited by 366
Körbel, S., Marques, M. A. L., & Botti, S. (2016) · Journal of Materials Chemistry C · doi:10.1039/c5tc04172d · Cited by 351
High performance perovskite solar cells by hybrid chemical vapor deposition
Leyden, M. R., Ono, L. K., Raga, S. R., Kato, Y., Wang, S., & Qi, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta04385e · Cited by 350
Self-citationYang, Z., Chueh, C., Zuo, F., Kim, J. H., Liang, P., & Jen, A. K. ‐. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500328 · Cited by 348
Material and Device Stability in Perovskite Solar Cells
Kim, H., Seo, J., & Park, N. (2016) · ChemSusChem · doi:10.1002/cssc.201600915 · Cited by 346
Yang, M., Zhou, Y., Zeng, Y., Jiang, C., Padture, N. P., & Zhu, K. (2015) · Advanced Materials · doi:10.1002/adma.201502586 · Cited by 344
Wei, F., Deng, Z., Sun, S., Xie, F., Kieslich, G., Evans, D. M., Carpenter, M. A., Bristowe, P. D., & Cheetham, A. K. (2016) · Materials Horizons · doi:10.1039/c6mh00053c · Cited by 342
Encapsulation for long-term stability enhancement of perovskite solar cells
Matteocci, F., Cinà, L., Lamanna, E., Cacovich, S., Divitini, G., Midgley, P. A., Ducati, C., & Di Carlo, A. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.09.041 · Cited by 340
Guo, F., Azimi, H., Hou, Y., Przybilla, T., Hu, M., Bronnbauer, C., Langner, S., Spiecker, E., Forberich, K., & Brabec, C. J. (2015) · Nanoscale · doi:10.1039/c4nr06033d · Cited by 337
Rong, Y., Hou, X., Hu, Y., Mei, A., Liu, L., Wang, P., & Han, H. (2017) · Nature Communications · doi:10.1038/ncomms14555 · Cited by 324
Singh, T., Kulkarni, A., Ikegami, M., & Miyasaka, T. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b02843 · Cited by 318
Bi, C., Shao, Y., Yuan, Y., Xiao, Z., Wang, C., Gao, Y., & Huang, J. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta04007d · Cited by 316
Kaltzoglou, A., Antoniadou, M., Kontos, A. G., Stoumpos, C. C., Perganti, D., Siranidi, E., Raptis, V., Trohidou, K., Psycharis, V., Kanatzidis, M. G., et al. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b02175 · Cited by 316
Das, S., Yang, B., Gu, G., Joshi, P. C., Ivanov, I. N., Rouleau, C. M., Aytug, T., Geohegan, D. B., & Xiao, K. (2015) · ACS Photonics · doi:10.1021/acsphotonics.5b00119 · Cited by 312
Harikesh, P. C., Mulmudi, H. K., Ghosh, B., Goh, T. W., Teng, Y. T., Thirumal, K., Lockrey, M., Weber, K., Koh, T. M., Li, S., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03310 · Cited by 303
Is Cu a stable electrode material in hybrid perovskite solar cells for a 30-year lifetime?
Zhao, J., Zheng, X., Deng, Y., Li, T., Shao, Y., Gruverman, A., Shield, J., & Huang, J. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02980a · Cited by 303
Wang, Z., McMeekin, D. P., Sakai, N., van Reenen, S., Wojciechowski, K., Patel, J. B., Johnston, M. B., & Snaith, H. J. (2017) · Advanced Materials · doi:10.1002/adma.201604186 · Cited by 303
Zhou, H., Shi, Y., Dong, Q., Zhang, H., Xing, Y., Wang, K., Du, Y., & Ma, T. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5017069 · Cited by 290
Encapsulation for improving the lifetime of flexible perovskite solar cells
Weerasinghe, H. C., Dkhissi, Y., Scully, A. D., Caruso, R. A., & Cheng, Y.-B. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.10.006 · Cited by 284
Pinhole-free perovskite films for efficient solar modules
Qiu, W., Merckx, T., Jaysankar, M., Masse de la Huerta, C., Rakocevic, L., Zhang, W., Paetzold, U. W., Gehlhaar, R., Froyen, L., Poortmans, J., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03703d · Cited by 284
Computational Screening of Homovalent Lead Substitution in Organic–Inorganic Halide Perovskites
Filip, M. R., & Giustino, F. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b11845 · Cited by 283
Heo, J. H., Lee, M. H., Jang, M. H., & Im, S. H. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06718b · Cited by 281
Klug, M. T., Osherov, A., Haghighirad, A. A., Stranks, S. D., Brown, P. R., Bai, S., Wang, J. T.-W., Dang, X., Bulović, V., Snaith, H. J., et al. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03201j · Cited by 274
Razza, S., Castro-Hermosa, S., Di Carlo, A., & Brown, T. M. (2016) · APL Materials · doi:10.1063/1.4962478 · Cited by 271
Juarez-Perez, E. J., Leyden, M. R., Wang, S., Ono, L. K., Hawash, Z., & Qi, Y. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b01777 · Cited by 270
Self-citationTin‐ and Lead‐Based Perovskite Solar Cells under Scrutiny: An Environmental Perspective
Serrano‐Lujan, L., Espinosa, N., Larsen‐Olsen, T. T., Abad, J., Urbina, A., & Krebs, F. C. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501119 · Cited by 269
Recycling Perovskite Solar Cells To Avoid Lead Waste
Binek, A., Petrus, M. L., Huber, N., Bristow, H., Hu, Y., Bein, T., & Docampo, P. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b03767 · Cited by 268
3D Printer Based Slot‐Die Coater as a Lab‐to‐Fab Translation Tool for Solution‐Processed Solar Cells
Vak, D., Hwang, K., Faulks, A., Jung, Y., Clark, N., Kim, D., Wilson, G. J., & Watkins, S. E. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401539 · Cited by 265
Organometal halide perovskite thin films and solar cells by vapor deposition
Ono, L. K., Leyden, M. R., Wang, S., & Qi, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08963h · Cited by 258
Self-citationCsPbIBr2 Perovskite Solar Cell by Spray-Assisted Deposition
Lau, C. F. J., Deng, X., Ma, Q., Zheng, J., Yun, J. S., Green, M. A., Huang, S., & Ho-Baillie, A. W. Y. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00341 · Cited by 255
Extended Photo-Conversion Spectrum in Low-Toxic Bismuth Halide Perovskite Solar Cells
Johansson, M. B., Zhu, H., & Johansson, E. M. J. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b01452 · Cited by 252
High Temperature‐Stable Perovskite Solar Cell Based on Low‐Cost Carbon Nanotube Hole Contact
Aitola, K., Domanski, K., Correa‐Baena, J., Sveinbjörnsson, K., Saliba, M., Abate, A., Grätzel, M., Kauppinen, E., Johansson, E. M. J., Tress, W., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606398 · Cited by 248
Inkjet printing of CH3NH3PbI3on a mesoscopic TiO2film for highly efficient perovskite solar cells
Li, S.-G., Jiang, K.-J., Su, M.-J., Cui, X.-P., Huang, J.-H., Zhang, Q.-Q., Zhou, X.-Q., Yang, L.-M., & Song, Y.-L. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05675b · Cited by 242
A critical review on secondary lead recycling technology and its prospect
Zhang, W., Yang, J., Wu, X., Hu, Y., Yu, W., Wang, J., Dong, J., Li, M., Liang, S., Hu, J., et al. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.03.046 · Cited by 241
A large area (70 cm2) monolithic perovskite solar module with a high efficiency and stability
Priyadarshi, A., Haur, L. J., Murray, P., Fu, D., Kulkarni, S., Xing, G., Sum, T. C., Mathews, N., & Mhaisalkar, S. G. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02693a · Cited by 241
Matching Charge Extraction Contact for Wide‐Bandgap Perovskite Solar Cells
Lin, Y., Chen, B., Zhao, F., Zheng, X., Deng, Y., Shao, Y., Fang, Y., Bai, Y., Wang, C., & Huang, J. (2017) · Advanced Materials · doi:10.1002/adma.201700607 · Cited by 239
Huang, H., Shi, J., Zhu, L., Li, D., Luo, Y., & Meng, Q. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.07.026 · Cited by 237
Navas, J., Sánchez-Coronilla, A., Gallardo, J. J., Cruz Hernández, N., Piñero, J. C., Alcántara, R., Fernández-Lorenzo, C., De los Santos, D. M., Aguilar, T., & Martín-Calleja, J. (2015) · Nanoscale · doi:10.1039/c5nr00041f · Cited by 233
High Efficiency Pb–In Binary Metal Perovskite Solar Cells
Wang, Z., Li, M., Yang, Y., Hu, Y., Ma, H., Gao, X., & Liao, L. (2016) · Advanced Materials · doi:10.1002/adma.201600626 · Cited by 233
Agresti, A., Pescetelli, S., Palma, A. L., Del Rio Castillo, A. E., Konios, D., Kakavelakis, G., Razza, S., Cinà, L., Kymakis, E., Bonaccorso, F., et al. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00672 · Cited by 225
Encapsulation of Perovskite Solar Cells for High Humidity Conditions
Dong, Q., Liu, F., Wong, M. K., Tam, H. W., Djurišić, A. B., Ng, A., Surya, C., Chan, W. K., & Ng, A. M. C. (2016) · ChemSusChem · doi:10.1002/cssc.201600868 · Cited by 218
Doping and alloying for improved perovskite solar cells
Zhou, Y., Zhou, Z., Chen, M., Zong, Y., Huang, J., Pang, S., & Padture, N. P. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08699c · Cited by 217
Chen, W., Xu, L., Feng, X., Jie, J., & He, Z. (2017) · Advanced Materials · doi:10.1002/adma.201603923 · Cited by 215
Chang, N. L., Yi Ho‐Baillie, A. W., Basore, P. A., Young, T. L., Evans, R., & Egan, R. J. (2017) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2871 · Cited by 212
Leyden, M. R., Jiang, Y., & Qi, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta04267h · Cited by 211
Self-citationLiao, H., Guo, P., Hsu, C., Lin, M., Wang, B., Zeng, L., Huang, W., Soe, C. M. M., Su, W., Bedzyk, M. J., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601660 · Cited by 211
Cotella, G., Baker, J., Worsley, D., De Rossi, F., Pleydell-Pearce, C., Carnie, M., & Watson, T. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.09.013 · Cited by 209
Ye, F., Chen, H., Xie, F., Tang, W., Yin, M., He, J., Bi, E., Wang, Y., Yang, X., & Han, L. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01411a · Cited by 206
Selective dissolution of halide perovskites as a step towards recycling solar cells
Kim, B. J., Kim, D. H., Kwon, S. L., Park, S. Y., Li, Z., Zhu, K., & Jung, H. S. (2016) · Nature Communications · doi:10.1038/ncomms11735 · Cited by 205
Ding, B., Li, Y., Huang, S.-Y., Chu, Q.-Q., Li, C.-X., Li, C.-J., & Yang, G.-J. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00027h · Cited by 203
Leyden, M. R., Lee, M. V., Raga, S. R., & Qi, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03577e · Cited by 195
Self-citationSchuller, S., Schilinsky, P., Hauch, J., & Brabec, C. J. (2004) · Applied Physics A · doi:10.1007/s00339-003-2499-4 · Cited by 193
Bryant, D., Greenwood, P., Troughton, J., Wijdekop, M., Carnie, M., Davies, M., Wojciechowski, K., Snaith, H. J., Watson, T., & Worsley, D. (2014) · Advanced Materials · doi:10.1002/adma.201403939 · Cited by 193
n-Type Doping and Energy States Tuning in CH3NH3Pb1–xSb2 x/3I3 Perovskite Solar Cells
Zhang, J., Shang, M.-H., Wang, P., Huang, X., Xu, J., Hu, Z., Zhu, Y., & Han, L. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00241 · Cited by 190
Matteocci, F., Razza, S., Di Giacomo, F., Casaluci, S., Mincuzzi, G., Brown, T. M., D'Epifanio, A., Licoccia, S., & Di Carlo, A. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp55313b · Cited by 182
Recent progress in solar cells based on one-dimensional nanomaterials
Sun, H., Deng, J., Qiu, L., Fang, X., & Peng, H. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03853c · Cited by 180
Self-citationHsiao, S., Lin, H., Lee, W., Tsai, W., Chiang, K., Liao, W., Ren‐Wu, C., Chen, C., & Lin, H. (2016) · Advanced Materials · doi:10.1002/adma.201601505 · Cited by 180
Amorphous hole-transporting layer in slot-die coated perovskite solar cells
Qin, T., Huang, W., Kim, J.-E., Vak, D., Forsyth, C., McNeill, C. R., & Cheng, Y.-B. (2017) · Nano Energy · doi:10.1016/j.nanoen.2016.11.022 · Cited by 174
There is no safe threshold for lead exposure: Α literature review
Vorvolakos, T., Arseniou, S., & Samakouri, M. (2016) · Psychiatriki · doi:10.22365/jpsych.2016.273.204 · Cited by 170
Post-annealing of MAPbI3 perovskite films with methylamine for efficient perovskite solar cells
Jiang, Y., Juarez-Perez, E. J., Ge, Q., Wang, S., Leyden, M. R., Ono, L. K., Raga, S. R., Hu, J., & Qi, Y. (2016) · Materials Horizons · doi:10.1039/c6mh00160b · Cited by 160
Self-citationProof-of-concept for facile perovskite solar cell recycling
Kadro, J. M., Pellet, N., Giordano, F., Ulianov, A., Müntener, O., Maier, J., Grätzel, M., & Hagfeldt, A. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02013e · Cited by 160
van der Kuijp, T. J., Huang, L., & Cherry, C. (2013) · Environmental Health · doi:10.1186/1476-069x-12-61 · Cited by 159
Gottesfeld, P., & Pokhrel, A. K. (2011) · Journal of Occupational and Environmental Hygiene · doi:10.1080/15459624.2011.601710 · Cited by 158
Song, D., Cui, P., Wang, T., Wei, D., Li, M., Cao, F., Yue, X., Fu, P., Li, Y., He, Y., et al. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b06859 · Cited by 140
High efficiency photovoltaic module based on mesoscopic organometal halide perovskite
Matteocci, F., Cinà, L., Giacomo, F. D., Razza, S., Palma, A. L., Guidobaldi, A., D’Epifanio, A., Licoccia, S., Brown, T. M., Reale, A., et al. (2014) · Progress in Photovoltaics Research and Applications · doi:10.1002/pip.2557 · Cited by 126
Wei, Z., Chen, H., Yan, K., & Yang, S. (2014) · Angewandte Chemie · doi:10.1002/ange.201408638 · Cited by 124
Stability Comparison of Perovskite Solar Cells Based on Zinc Oxide and Titania on Polymer Substrates
Dkhissi, Y., Meyer, S., Chen, D., Weerasinghe, H. C., Spiccia, L., Cheng, Y., & Caruso, R. A. (2016) · ChemSusChem · doi:10.1002/cssc.201501659 · Cited by 115
Conings, B., Babayigit, A. H., Klug, M. T., Bai, S., Gauquelin, N., Sakai, N., Wang, J. T., Verbeeck, J., Boyen, H. ‐., & Snaith, H. J. (2016) · Advanced Materials · doi:10.1002/adma.201603747 · Cited by 115
Huang, F., Jiang, L., Pascoe, A. R., Yan, Y., Bach, U., Spiccia, L., & Cheng, Y. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.07.033 · Cited by 109
Dual function interfacial layer for highly efficient and stable lead halide perovskite solar cells
Song, D., Wei, D., Cui, P., Li, M., Duan, Z., Wang, T., Ji, J., Li, Y., Mbengue, J. M., Li, Y., et al. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta00577b · Cited by 108
Xia, X., Wu, W., Li, H., Zheng, B., Xue, Y., Xu, J. P., Zhang, D., Gao, C., & Liu, X. (2016) · RSC Advances · doi:10.1039/c5ra23359c · Cited by 104
Hashmi, S. G., Tiihonen, A., Martineau, D., Özkan, M., Vivo, P., Kaunisto, K. M., Vainio, U., Zakeeruddin, S. M., & Grätzel, M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10605f · Cited by 93
Hong, F., Saparov, B., Meng, W., Xiao, Z., Mitzi, D. B., & Yan, Y. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b00920 · Cited by 91
Soufiani, A. M., Hameiri, Z., Meyer, S., Lim, S., Tayebjee, M. J. Y., Yun, J. S., Ho-Baillie, A. W. Y., Conibeer, G., Spiccia, L., & Green, M. A. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201602111 · Cited by 65
Low‐Pressure Hybrid Chemical Vapor Growth for Efficient Perovskite Solar Cells and Large‐Area Module
Shen, P., Chen, J., Chiang, Y., Li, M., Guo, T., & Chen, P. (2016) · Advanced Materials Interfaces · doi:10.1002/admi.201500849 · Cited by 63
Park, M., Park, J., Han, I. K., & Oh, J. Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta03164a · Cited by 62
Towards Long‐Term Photostability of Solid‐State Dye Sensitized Solar Cells
Pathak, S. K., Abate, A., Leijtens, T., Hollman, D. J., Teuscher, J., Pazos, L., Docampo, P., Steiner, U., & Snaith, H. J. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301667 · Cited by 61
Singh, P., Rana, P. J. S., Dhingra, P., & Kar, P. (2016) · Journal of Materials Chemistry C · doi:10.1039/c6tc00650g · Cited by 55
Fujimori, T., Eguchi, A., Agusa, T., Tue, N. M., Suzuki, G., Takahashi, S. I., Viet, P. H., Tanabe, S., & Takigami, H. (2016) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-016-0527-7 · Cited by 26
Power Failure: The Battered Legacy of Leaded Batteries
Ogunseitan, O. A. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b03174 · Cited by 12
Cited by
Lithium-ion batteries: outlook on present, future, and hybridized technologies
Kim, T., Song, W., Son, D.-Y., Ono, L. K., & Qi, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta10513h · Cited by 2,479
Self-citationReducing Detrimental Defects for High‐Performance Metal Halide Perovskite Solar Cells
Ono, L. K., Liu, S. (., & Qi, Y. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201905521 · Cited by 541
Self-citationThe Role of Graphene and Other 2D Materials in Solar Photovoltaics
Das, S., Pandey, D., Thomas, J., & Roy, T. (2019) · Advanced Materials · doi:10.1002/adma.201802722 · Cited by 449
Development of encapsulation strategies towards the commercialization of perovskite solar cells
Ma, S., Yuan, G., Zhang, Y., Yang, N., Li, Y., & Chen, Q. (2022) · Energy & Environmental Science · doi:10.1039/d1ee02882k · Cited by 395
Energy Level Alignment at Interfaces in Metal Halide Perovskite Solar Cells
Wang, S., Sakurai, T., Wen, W., & Qi, Y. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800260 · Cited by 350
Self-citation
Metadata
- Authors
- Qiu, L., Ono, L. K., & Qi, Y.
- Venue
- Materials Today Energy
- Publisher
- Elsevier BV
- Published
- 2018-03
- Volume
- 7
- Pages
- 169-189
- ISSN
- 2468-6069 (ISSN-L)
- OpenAlex
- W2756513271
- Cited by
- 286
- References
- 193
- FWCI
- 14.32
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.