The DOI matches its Crossref record; 148 of the 148 references it cites were found in a registry or an index.
4D printing of shape memory polylactic acid (PLA)
Open accessAbstract
Additive manufacturing has attracted much attention in the last decade as a principal growing sector of complex manufacturing. Precise layer-by-layer patterning of materials gives rise to novel designs and fabrication strategies that were previously not possible to realize with conventional techniques. Using suitable materials and organized variation in the printing settings, parts with time-dependent shapes that can be tuned through environmental stimuli can be realized. Given that these parts can either change their shape over time to a pre-programmed three-dimensional shape or revert to an initial design, this process has become referred to as four-dimensional (4D) printing. In this regard, the commonly-used polylactic acid (PLA) polymer has been recognized as a compelling material candidate for 4D printing as it is a biobased polymer with great shape memory behavior that can be employed in the design and manufacturing of a broad range of smart products. In this review, we investigate the material properties and shape memory behavior of PLA polymer in the first section. Then, we discuss the potential of PLA for 4D printing, including the principles underlying the strategy for PLA-based printing of self-folding structures. The resulting materials exhibit response to environmental stimulus as well as temperature, magnetic field, or light. We additionally discuss the impact of geometrical design and printing conditions on the functionality of the final printed products.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
3-D printing: The new industrial revolution
Berman, B. (2012) · Business Horizons · doi:10.1016/j.bushor.2011.11.003 · Cited by 2,481
An overview of the recent developments in polylactide (PLA) research
Madhavan Nampoothiri, K., Nair, N. R., & John, R. P. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.092 · Cited by 2,448
Proceedings of the 2017 CHI Conference on Human Factors in Computing Systems
(2017) · doi:10.1145/3025453 · Cited by 2,207
Review of progress in shape-memory polymers
Liu, C., Qin, H., & Mather, P. T. (2007) · Journal of Materials Chemistry · doi:10.1039/b615954k · Cited by 1,942
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Zhao, Q., Qi, H. J., & Xie, T. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.04.001 · Cited by 1,409
A review of stimuli-responsive shape memory polymer composites
Meng, H., & Li, G. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.023 · Cited by 1,190
Poly-lactic acid synthesis for application in biomedical devices — A review
Lasprilla, A. J. R., Martinez, G. A. R., Lunelli, B. H., Jardini, A. L., & Filho, R. M. (2012) · Biotechnology Advances · doi:10.1016/j.biotechadv.2011.06.019 · Cited by 1,174
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Polylactic acid (PLA) controlled delivery carriers for biomedical applications
Tyler, B., Gullotti, D., Mangraviti, A., Utsuki, T., & Brem, H. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.018 · Cited by 1,050
Multifunctional Shape‐Memory Polymers
Behl, M., Razzaq, M. Y., & Lendlein, A. (2010) · Advanced Materials · doi:10.1002/adma.200904447 · Cited by 971
Shape memory polymers: Past, present and future developments
Hager, M. D., Bode, S., Weber, C., & Schubert, U. S. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.04.002 · Cited by 950
Nagarajan, V., Mohanty, A. K., & Misra, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00321 · Cited by 926
Medical Applications for 3D Printing: Current and Projected Uses.
Ventola, C. L. (2014) · PubMed Central · Cited by 920
3D printing of smart materials: A review on recent progresses in 4D printing
Khoo, Z. X., Teoh, J. E. M., Liu, Y., Chua, C. K., Yang, S., An, J., Leong, K. F., & Yeong, W. Y. (2015) · Virtual and Physical Prototyping · doi:10.1080/17452759.2015.1097054 · Cited by 912
3D Printing of Shape Memory Polymers for Flexible Electronic Devices
Zarek, M., Layani, M., Cooperstein, I., Sachyani, E., Cohn, D., & Magdassi, S. (2016) · Advanced Materials · doi:10.1002/adma.201503132 · Cited by 903
4D Bioprinting for Biomedical Applications
Gao, B., Yang, Q., Zhao, X., Jin, G., Ma, Y., & Xu, F. (2016) · Trends in Biotechnology · doi:10.1016/j.tibtech.2016.03.004 · Cited by 711
Fortunati, E., Armentano, I., Zhou, Q., Iannoni, A., Saino, E., Visai, L., Berglund, L. A., & Kenny, J. M. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.09.066 · Cited by 581
Metal additive manufacturing in the commercial aviation industry: A review
Gisario, A., Kazarian, M., Martina, F., & Mehrpouya, M. (2019) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.08.005 · Cited by 574
Self-citationGonzález-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds
Senatov, F. S., Niaza, K. V., Zadorozhnyy, M. Y., Maksimkin, A. V., Kaloshkin, S. D., & Estrin, Y. Z. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.11.036 · Cited by 547
4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
Bakarich, S. E., Gorkin, R., Panhuis, M. I. H., & Spinks, G. M. (2015) · Macromolecular Rapid Communications · doi:10.1002/marc.201500079 · Cited by 526
Wei, H., Zhang, Q., Yao, Y., Liu, L., Liu, Y., & Leng, J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12824 · Cited by 504
Signori, F., Coltelli, M.-B., & Bronco, S. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.10.004 · Cited by 503
Additive manufacturing — A review of 4D printing and future applications
Mitchell, A., Lafont, U., Hołyńska, M., & Semprimoschnig, C. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.10.038 · Cited by 494
Super tough poly(lactic acid) blends: a comprehensive review
Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S. (2020) · RSC Advances · doi:10.1039/d0ra01801e · Cited by 465
Combination of Poly(lactic) Acid and Starch for Biodegradable Food Packaging
Muller, J., González-Martínez, C., & Chiralt, A. (2017) · Materials · doi:10.3390/ma10080952 · Cited by 447
Challenges of shape memory polymers: A review of the progress toward overcoming SMP's limitations
Rousseau, I. A. (2008) · Polymer Engineering & Science · doi:10.1002/pen.21213 · Cited by 431
The Potential of Additive Manufacturing in the Smart Factory Industrial 4.0: A Review
Mehrpouya, M., Dehghanghadikolaei, A., Fotovvati, B., Vosooghnia, A., Emamian, S. S., & Gisario, A. (2019) · Applied Sciences · doi:10.3390/app9183865 · Cited by 419
Self-citation3D and 4D Printing of Polymers for Tissue Engineering Applications
Tamay, D. G., Dursun Usal, T., Alagoz, A. S., Yucel, D., Hasirci, N., & Hasirci, V. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00164 · Cited by 417
4D printing of polymeric materials for tissue and organ regeneration
Miao, S., Castro, N., Nowicki, M., Xia, L., Cui, H., Zhou, X., Zhu, W., Lee, S.-J., Sarkar, K., Vozzi, G., et al. (2017) · Materials Today · doi:10.1016/j.mattod.2017.06.005 · Cited by 408
Multi-shape active composites by 3D printing of digital shape memory polymers
Wu, J., Yuan, C., Ding, Z., Isakov, M., Mao, Y., Wang, T., Dunn, M. L., & Qi, H. J. (2016) · Scientific Reports · doi:10.1038/srep24224 · Cited by 399
Polylactide (PLA) and Its Blends with Poly(butylene succinate) (PBS): A Brief Review
Su, S., Kopitzky, R., Tolga, S., & Kabasci, S. (2019) · Polymers · doi:10.3390/polym11071193 · Cited by 380
Toughening of Polylactide by Melt Blending with a Biodegradable Poly(ether)urethane Elastomer
Li, Y., & Shimizu, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700027 · Cited by 371
Kim, H., Lee, H., & Knowles, J. C. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30866 · Cited by 366
4D Printing Technology: A Review
Choi, J., Kwon, O.-C., Jo, W., Lee, H. J., & Moon, M.-W. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0039 · Cited by 365
Toughening of polylactide by melt blending with linear low‐density polyethylene
Anderson, K. S., Lim, S. H., & Hillmyer, M. A. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12462 · Cited by 362
4D printing and stimuli-responsive materials in biomedical aspects
Lui, Y. S., Sow, W. T., Tan, L. P., Wu, Y., Lai, Y., & Li, H. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.05.005 · Cited by 333
Structure and properties of shape-memory polyurethane block copolymers
Takahashi, T., Hayashi, N., & Hayashi, S. (1996) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19960516)60:7<1061::aid-app18>3.0.co;2-3 · Cited by 326
Programming 2D/3D shape-shifting with hobbyist 3D printers
van Manen, T., Janbaz, S., & Zadpoor, A. A. (2017) · Materials Horizons · doi:10.1039/c7mh00269f · Cited by 321
Self-citationXin, X., Liu, L., Liu, Y., & Leng, J. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004226 · Cited by 319
3D printed architected polymeric sandwich panels: Energy absorption and structural performance
Yazdani Sarvestani, H., Akbarzadeh, A. H., Niknam, H., & Hermenean, K. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.04.002 · Cited by 314
Oh, J. K. (2011) · Soft Matter · doi:10.1039/c0sm01539c · Cited by 301
Anderson, K. S., & Hillmyer, M. A. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.047 · Cited by 300
Huang, W. M., Zhao, Y., Wang, C. C., Ding, Z., Purnawali, H., Tang, C., & Zhang, J. L. (2012) · Journal of Polymer Research · doi:10.1007/s10965-012-9952-z · Cited by 299
A review of 3D and 4D printing of natural fibre biocomposites
Le Duigou, A., Correa, D., Ueda, M., Matsuzaki, R., & Castro, M. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108911 · Cited by 280
Zhao, W., Zhang, F., Leng, J., & Liu, Y. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107866 · Cited by 279
Poly(Lactic Acid)-Based Biomaterials: Synthesis, Modification and Applications
Xiao, L., Wang, B., Yang, G., & Gauthier, M. (2012) · Biomedical Science, Engineering and Technology · doi:10.5772/23927 · Cited by 277
Bhatia, A., Gupta, R. K., Bhattacharya, S. N., & Choi, H. J. (2007) · RMIT Research Repository (RMIT University Library) · Cited by 272
Zhang, Q., Zhang, K., & Hu, G. (2016) · Scientific Reports · doi:10.1038/srep22431 · Cited by 269
Reversible energy absorbing meta-sandwiches by FDM 4D printing
Bodaghi, M., Serjouei, A., Zolfagharian, A., Fotouhi, M., Rahman, H., & Durand, D. (2020) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2020.105451 · Cited by 268
Flame retardant polymer materials: An update and the future for 3D printing developments
Vahabi, H., Laoutid, F., Mehrpouya, M., Saeb, M. R., & Dubois, P. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100604 · Cited by 263
Self-citationZhang, N., Wang, Q., Ren, J., & Wang, L. (2009) · Journal of Materials Science · doi:10.1007/s10853-008-3049-4 · Cited by 240
4D Printing Self-Morphing Structures
Bodaghi, M., Noroozi, R., Zolfagharian, A., Fotouhi, M., & Norouzi, S. (2019) · Materials · doi:10.3390/ma12081353 · Cited by 231
From 3D to 4D printing: Approaches and typical applications
Zhou, Y., Huang, W. M., Kang, S. F., Wu, X. L., Lu, H. B., Fu, J., & Cui, H. (2015) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-015-0925-0 · Cited by 224
Fortunati, E., Armentano, I., Zhou, Q., Puglia, D., Terenzi, A., Berglund, L. A., & Kenny, J. M. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.03.027 · Cited by 220
Leist, S. K., & Zhou, J. (2016) · Virtual and Physical Prototyping · doi:10.1080/17452759.2016.1198630 · Cited by 216
Polylactide-based polyurethane and its shape-memory behavior
Wang, W., Ping, P., Chen, X., & Jing, X. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.11.029 · Cited by 212
Wang, Y., & Hillmyer, M. A. (2001) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1254 · Cited by 212
Zhou, W., Qiao, Z., Nazarzadeh Zare, E., Huang, J., Zheng, X., Sun, X., Shao, M., Wang, H., Wang, X., Chen, D., et al. (2020) · Journal of Medicinal Chemistry · doi:10.1021/acs.jmedchem.9b02115 · Cited by 209
New directions in the chemistry of shape memory polymers
Berg, G. J., McBride, M. K., Wang, C., & Bowman, C. N. (2014) · Polymer · doi:10.1016/j.polymer.2014.07.052 · Cited by 199
Influence of PLA Filament Conditions on Characteristics of FDM Parts
Valerga, A. P., Batista, M., Salguero, J., & Girot, F. (2018) · Materials · doi:10.3390/ma11081322 · Cited by 198
Hu, Y., Daoud, W., Cheuk, K., & Lin, C. (2016) · Materials · doi:10.3390/ma9030133 · Cited by 194
Barletta, M., Gisario, A., & Mehrpouya, M. (2021) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.11.036 · Cited by 194
Self-citationHo, C.-H., Wang, C.-H., Lin, C.-I., & Lee, Y.-D. (2008) · Polymer · doi:10.1016/j.polymer.2008.06.054 · Cited by 190
Pattern Transformation of Heat-Shrinkable Polymer by Three-Dimensional (3D) Printing Technique
Zhang, Q., Yan, D., Zhang, K., & Hu, G. (2015) · Scientific Reports · doi:10.1038/srep08936 · Cited by 188
Miao, S., Zhu, W., Castro, N. J., Leng, J., & Zhang, L. G. (2016) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2015.0542 · Cited by 187
Fukushima, K., Murariu, M., Camino, G., & Dubois, P. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.02.029 · Cited by 178
Toughening of poly(L‐lactide) by melt blending with rubbers
Ishida, S., Nagasaki, R., Chino, K., Dong, T., & Inoue, Y. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30134 · Cited by 177
Leist, S. K., Gao, D., Chiou, R., & Zhou, J. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2017.1341815 · Cited by 173
Technological considerations for 4D printing: An overview
Pei, E., & Loh, G. H. (2018) · Progress in Additive Manufacturing · doi:10.1007/s40964-018-0047-1 · Cited by 171
Thermorph: Democratizing 4D Printing of Self-Folding Materials and Interfaces
An, B., Tao, Y., Gu, J., Cheng, T., Chen, X. '., Zhang, X., Zhao, W., Do, Y., Takahashi, S., Wu, H.-Y., et al. (2018) · Proceedings of the 2018 CHI Conference on Human Factors in Computing Systems · doi:10.1145/3173574.3173834 · Cited by 168
Mehrpouya, M., Vahabi, H., Barletta, M., Laheurte, P., & Langlois, V. (2021) · Materials Science and Engineering: C · doi:10.1016/j.msec.2021.112216 · Cited by 168
Self-citationA review of shape memory polymers bearing reversible binding groups
Lewis, C. L., & Dell, E. M. (2016) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23994 · Cited by 167
4D Printed Hydrogels: Fabrication, Materials, and Applications
Dong, Y., Wang, S., Ke, Y., Ding, L., Zeng, X., Magdassi, S., & Long, Y. (2020) · Advanced Materials Technologies · doi:10.1002/admt.202000034 · Cited by 167
Mechanisms of the Shape Memory Effect in Polymeric Materials
Wu, X., Huang, W., Zhao, Y. S., Ding, Z., Tang, C., & Zhang, J. (2013) · Polymers · doi:10.3390/polym5041169 · Cited by 165
Some Novel Polymeric Nanocomposites
Mark, J. E. (2006) · Accounts of Chemical Research · doi:10.1021/ar040062k · Cited by 165
Additive Manufacturing of Biomaterials − The Evolution of Rapid Prototyping
Touri, M., Kabirian, F., Saadati, M., Ramakrishna, S., & Mozafari, M. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201800511 · Cited by 165
Self-citation4D Printing and Universal Transformation
Tibbits, S., McKnelly, C., Olguin, C., Dikovsky, D., & Hirsch, S. (2014) · ACADIA proceedings · doi:10.52842/conf.acadia.2014.539 · Cited by 160
Review of Polymeric Materials in 4D Printing Biomedical Applications
Shie, M., Shen, Y., Astuti, S. D., Lee, A. K.-X., Lin, S.-H., Dwijaksara, N. L. B., & Chen, Y. (2019) · Polymers · doi:10.3390/polym11111864 · Cited by 159
Preparation and Characterization of Shape Memory Elastomeric Composites
Luo, X., & Mather, P. T. (2009) · Macromolecules · doi:10.1021/ma9015888 · Cited by 158
Wu, W., Ye, W., Wu, Z., Geng, P., Wang, Y., & Zhao, J. X. (2017) · Materials · doi:10.3390/ma10080970 · Cited by 155
3D printed biodegradable composites: An insight into mechanical properties of PLA/chitosan scaffold
Singh, S., Singh, G., Prakash, C., Ramakrishna, S., Lamberti, L., & Pruncu, C. I. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.106722 · Cited by 152
Self-citationMiscibility and crystallization behaviour of poly(l-lactide)/poly(p-vinylphenol) blends
Zhang, L., Goh, S. H., & Lee, S. Y. (1998) · Polymer · doi:10.1016/s0032-3861(97)10167-7 · Cited by 149
Liu, Y., Zhang, W., Zhang, F., Lan, X., Leng, J., Liu, S., Jia, X., Cotton, C., Sun, B., Gu, B., et al. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.07.053 · Cited by 148
Shape-Adaptive Metastructures with Variable Bandgap Regions by 4D Printing
Noroozi, R., Bodaghi, M., Jafari, H., Zolfagharian, A., & Fotouhi, M. (2020) · Polymers · doi:10.3390/polym12030519 · Cited by 143
Advanced Shape Memory Technology to Reshape Product Design, Manufacturing and Recycling
Yang, W., Lu, H., Huang, W., Qi, H. J., Wu, X., & Sun, K. (2014) · Polymers · doi:10.3390/polym6082287 · Cited by 137
Pandey, A., Singh, G., Singh, S., Jha, K., & Prakash, C. (2020) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2020.103781 · Cited by 132
Cheng, C., Xie, H. Q., Xu, Z., Li, L., Jiang, M.-N., Li, T., Yang, K., & Wang, Y. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125242 · Cited by 130
Claro, P. I. C., Neto, A. R. D. S., Bibbo, A. C. C., Mattoso, L. H. C., Bastos, M. D. S. R., & Marconcini, J. M. (2016) · Journal of Polymers and the Environment · doi:10.1007/s10924-016-0785-4 · Cited by 129
Interfacial tension of poly(lactic acid)/polystyrene blends
Biresaw, G., & Carriere, C. J. (2002) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10290 · Cited by 113
Singh, G., Singh, S., Prakash, C., Kumar, R., Kumar, R., & Ramakrishna, S. (2020) · Polymer Composites · doi:10.1002/pc.25683 · Cited by 111
Self-citation4D printing: processability and measurement of recovery force in shape memory polymers
Monzón, M., Paz, R., Pei, E., Ortega, Z., Suárez, L., Ortega, Z., Alemán‐Domínguez, M. E., Plucinski, T., & Clow, N. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9233-9 · Cited by 110
3D printing in tissue engineering: a state of the art review of technologies and biomaterials
Poomathi, N., Singh, S., Prakash, C., Subramanian, A., Sahay, R., Chinnappan, A., & Ramakrishna, S. (2020) · Rapid Prototyping Journal · doi:10.1108/rpj-08-2018-0217 · Cited by 110
Self-citationA functionally graded shape memory polymer
DiOrio, A. M., Luo, X., Lee, K. M., & Mather, P. T. (2011) · Soft Matter · doi:10.1039/c0sm00487a · Cited by 105
Nofar, M., Salehiyan, R., & Ray, S. S. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.108845 · Cited by 104
Davies, M. C., Shakesheff, K. M., Shard, A. G., Domb, A. J., Roberts, C. J., Tendler, S. J. B., & Williams, P. M. (1996) · Macromolecules · doi:10.1021/ma950889h · Cited by 99
Wu, Z., Zhao, J. X., Wu, W., Wang, P., Wang, B., Li, G., & Zhang, S. (2018) · Materials · doi:10.3390/ma11081357 · Cited by 99
Hiroi, R., Ray, S. S., Okamoto, M., & Shiroi, T. (2004) · Macromolecular Rapid Communications · doi:10.1002/marc.200400173 · Cited by 97
The benefits of additive manufacturing for sustainable design and production
Mehrpouya, M., Vosooghnia, A., Dehghanghadikolaei, A., & Fotovvati, B. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-818115-7.00009-2 · Cited by 97
Self-citation4D printed anisotropic structures with tailored mechanical behaviors and shape memory effects
Liu, T., Liu, L., Zeng, C., Liu, Y., & Leng, J. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107935 · Cited by 92
Review of mechanisms and deformation behaviors in 4D printing
Ding, H., Zhang, X., Liu, Y., & Ramakrishna, S. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03871-3 · Cited by 90
Self-citationPolylactides in additive biomanufacturing
Poh, P. S. P., Chhaya, M. P., Wunner, F. M., De‐Juan‐Pardo, E. M., Schilling, A. F., Schantz, J., van Griensven, M., & Hutmacher, D. W. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.07.006 · Cited by 88
D’Amico, T., Debaie, A., & Peterson, A. M. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-05-2016-0077 · Cited by 87
Three-Dimensional Printing of Complex Structures: Man Made or toward Nature?
Lin, D. L., Nian, Q., Deng, B., et al. (2014) · ACS Nano · doi:10.1021/nn504894j · Cited by 84
Chen, X., McGurk, S. L., Davies, M. C., Roberts, C. J., Shakesheff, K. M., Tendler, S. J. B., Williams, P. M., Davies, J., Dawkes, A. C., & Domb, A. J. (1998) · Macromolecules · doi:10.1021/ma9704525 · Cited by 83
A Brief Review of the Shape Memory Phenomena in Polymers and Their Typical Sensor Applications
Sun, L., Wang, T. X., Chen, H. M., Salvekar, A. V., Naveen, B. S., Xu, Q., Weng, Y., Guo, X., Chen, Y., & Huang, W. (2019) · Polymers · doi:10.3390/polym11061049 · Cited by 80
Wang, Y., & Li, X. (2020) · Mechanics of Materials · doi:10.1016/j.mechmat.2020.103628 · Cited by 78
Xin, X., Liu, L., Liu, Y., & Leng, J. (2020) · Smart Materials and Structures · doi:10.1088/1361-665x/ab85a4 · Cited by 77
Lopes, M. S., Jardini, A. L., & Filho, R. M. (2014) · Chemical engineering transactions · doi:10.3303/cet1438056 · Cited by 76
Polylactic acid (PLA)-based shape-memory materials for biomedical applications
Xu, J., & Song, J. (2015) · Elsevier eBooks · doi:10.1016/b978-0-85709-698-2.00010-6 · Cited by 71
Handbook of Polymer Nanocomposites for Industrial Applications
(2021) · Elsevier eBooks · doi:10.1016/c2018-0-05276-7 · Cited by 71
Krujatz, F., Lode, A., Seidel, J., Bley, T., Gelinsky, M., & Steingroewer, J. (2017) · New Biotechnology · doi:10.1016/j.nbt.2017.09.001 · Cited by 69
Liu, H., He, H., & Huang, B. (2020) · Macromolecular Materials and Engineering · doi:10.1002/mame.202000295 · Cited by 65
Aghjeh, M. R., Nazari, M., Khonakdar, H., Jafari, S., Wagenknecht, U., & Heinrich, G. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.09.081 · Cited by 64
Bodkhe, S., & Ermanni, P. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109738 · Cited by 64
Origami spring–inspired metamaterials and robots: An attempt at fully programmable robotics
Hu, F., Wang, W., Cheng, J., & Bao, Y. (2020) · Science Progress · doi:10.1177/0036850420946162 · Cited by 62
Fang, L., Yan, Y., Agarwal, O., Yao, S., Seppala, J. E., & Kang, S. H. (2020) · Materials · doi:10.3390/ma13194414 · Cited by 61
On the use of high viscosity polymers in the fused filament fabrication process
Khaliq, M. H., Gomes, R., Fernandes, C. B. P., Nóbrega, J. M., Carneiro, O. S., & Ferrás, L. L. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2016-0027 · Cited by 60
Investigation on the Functionality of Thermoresponsive Origami Structures
Mehrpouya, M., Azizi, A., Janbaz, S., & Gisario, A. (2020) · Advanced Engineering Materials · doi:10.1002/adem.202000296 · Cited by 59
Self-citationBlending of poly(L-lactic acid) with poly(cis-1,4-isoprene)
Jin, H., Chin, I.-J., Kim, M.-N., Kim, S. H., & Yoon, J. (2000) · European Polymer Journal · doi:10.1016/s0014-3057(99)00041-5 · Cited by 57
Investigation on shape recovery of 3D printed honeycomb sandwich structure
Mehrpouya, M., Gisario, A., Azizi, A., & Barletta, M. (2020) · Polymers for Advanced Technologies · doi:10.1002/pat.5020 · Cited by 56
Self-citationMolecular Mobilities in Biodegradable Poly( dl -lactide)/Poly(ε-caprolactone) Blends
Newman, D., Laredo, E., Bello, A., Grillo, A. M., Feijoo, J. L., & Müller, A. J. (2009) · Macromolecules · doi:10.1021/ma9007303 · Cited by 51
Radjabian, M., Kish, M. H., & Mohammadi, N. (2012) · Journal of Polymer Research · doi:10.1007/s10965-012-9870-0 · Cited by 50
Huang, W., Lu, H. B., Zhao, Y. S., Ding, Z., Wang, C., Zhang, J., Sun, L., Fu, J., & Gao, X. Y. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.03.028 · Cited by 50
Patel, K. K., & Purohit, R. (2018) · Materials Today Proceedings · doi:10.1016/j.matpr.2018.06.389 · Cited by 48
Thermal Responsive Shape Memory Polymers for Biomedical Applications
Xu, J., & Song, J. (2011) · InTech eBooks · doi:10.5772/19256 · Cited by 47
Vahabi, H., Rad, E. R., Parpaite, T., Langlois, V., & Saeb, M. R. (2019) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2019.04.044 · Cited by 45
Self-citationHeating‐Responsive Shape‐Memory Effect in Thermoplastic Polyurethanes with Low Melt‐Flow Index
Sun, L., Huang, W., Lu, H., Lim, K. J., Zhou, Y., Wang, T. X., & Gao, X. Y. (2014) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201400429 · Cited by 43
Carlson, M., & Li, Y. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-04927-5 · Cited by 43
An overview of elastic polymeric shape memory materials for comfort fitting
Sun, L., Huang, W., Wang, T. X., Chen, H. M., Renata, C., He, L., Lv, P., & Wang, C. C. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.10.005 · Cited by 41
Shape change/memory actuators based on shape memory materials
Renata, C., Huang, W., He, L., & Yang, J. (2017) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-017-0934-2 · Cited by 36
Shin, S., & So, H. (2020) · Smart Materials and Structures · doi:10.1088/1361-665x/aba490 · Cited by 32
Saeb, M. R., Mohammadi, Y., Kermaniyan, T. S., Zinck, P., & Stadler, F. J. (2017) · Polymer · doi:10.1016/j.polymer.2017.03.033 · Cited by 27
PLA and two components silicon rubber blends aiming for frozen foods packaging applications
Meekum, U., & Khiansanoi, A. (2017) · Results in Physics · doi:10.1016/j.rinp.2017.11.030 · Cited by 25
Shape memory Poly(lactic acid) binary blends with unusual fluorescence
Zhang, S., Liu, T., Zhao, B., et al. (2020) · Polymer · doi:10.1016/j.polymer.2020.122980 · Cited by 17
Iturrondobeitia, M., Ibarretxe, J., Okariz, A., Jimbert, P., Martínez, R. F., & Guraya, T. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.01.015 · Cited by 12
Nanocomposite biomaterials made by 3D printing: Achievements and challenges
Zarrintaj, P., Vahabi, H., Gutiérrez, T. J., Mehrpouya, M., Saeb, M. R., & Saeb, M. R. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-821497-8.00025-3 · Cited by 10
Self-citationFang, T., Fang, L., Chen, S.-P., Li, L., Huang, H., Lu, C., & Xu, Z. (2017) · Polymers · doi:10.3390/polym9050181 · Cited by 8
Memarian, F., Fereidoon, A., Khonakdar, H. A., Jafari, S. H., & Saeb, M. R. (2018) · Polymer Composites · doi:10.1002/pc.24738 · Cited by 8
Cited by
Fused deposition modelling: Current status, methodology, applications and future prospects
Cano-Vicent, A., Tambuwala, M. M., Hassan, S. S., Barh, D., Aljabali, A. A. A., Birkett, M., Arjunan, A., & Serrano-Aroca, Á. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102378 · Cited by 509
Poly(butylene succinate) (PBS): Materials, processing, and industrial applications
Barletta, M., Aversa, C., Ayyoob, M., Gisario, A., Hamad, K., Mehrpouya, M., & Vahabi, H. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101579 · Cited by 443
Self-citationArif, Z. U., Khalid, M. Y., Noroozi, R., Sadeghianmaryan, A., Jalalvand, M., & Hossain, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.140 · Cited by 395
Khalid, M. Y., Arif, Z. U., Noroozi, R., Zolfagharian, A., & Bodaghi, M. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2022.07.035 · Cited by 336
Metadata
- Authors
- Mehrpouya, M., Vahabi, H., Janbaz, S., Darafsheh, A., Mazur, T. R., & Ramakrishna, S.
- Venue
- Polymer
- Publisher
- Elsevier BV
- Published
- 2021-09
- Volume
- 230
- Pages
- 124080
- ISSN
- 0032-3861 (ISSN-L)
- OpenAlex
- W3191167256
- Cited by
- 258
- References
- 148
- FWCI
- 16.79
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.