Printability and Shape Fidelity of Bioinks in 3D Bioprinting
Open accessThe DOI matches its Crossref record; 285 of the 287 references it cites were found in a registry or an index.
Abstract
Three-dimensional bioprinting uses additive manufacturing techniques for the automated fabrication of hierarchically organized living constructs. The building blocks are often hydrogel-based bioinks, which need to be printed into structures with high shape fidelity to the intended computer-aided design. For optimal cell performance, relatively soft and printable inks are preferred, although these undergo significant deformation during the printing process, which may impair shape fidelity. While the concept of good or poor printability seems rather intuitive, its quantitative definition lacks consensus and depends on multiple rheological and chemical parameters of the ink. This review discusses qualitative and quantitative methodologies to evaluate printability of bioinks for extrusion- and lithography-based bioprinting. The physicochemical parameters influencing shape fidelity are discussed, together with their importance in establishing new models, predictive tools and printing methods that are deemed instrumental for the design of next-generation bioinks, and for reproducible comparison of their structural performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures














Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [30]
The cited source says what the claim attributes to it.
In the citing paper
“However, the successful fabrication of stable 3D constructs relies on hydrogels with optimized rheological behavior, structural stability, and physicochemical properties that ensure printability and shape fidelity [7,8,9].”
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Self-citationHinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Fibrinogen and fibrin structure and functions
MOSESSON, M. W. (2005) · Journal of Thrombosis and Haemostasis · doi:10.1111/j.1538-7836.2005.01365.x · Cited by 1,695
Bioinks for 3D bioprinting: an overview
Gungor-Ozkerim, P. S., Inci, I., Zhang, Y. S., Khademhosseini, A., & Dokmeci, M. R. (2018) · Biomaterials Science · doi:10.1039/c7bm00765e · Cited by 1,428
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Research works printed but not linked: 5
- (126) Chimene, D.; Kaunas, R.; Gaharwar, A. K. Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies. Adv. Mater. 2020 , 32 , 1902026. - · DOI · Paper page
- (129) Mezger, T. G. The Rheology Handbook , 3rd revised ed.; Vincentz Network, 2011. -
- (156) Petta, D.; Grijpma, D. W.; Alini, M.; Eglin, D.; D ' Este, M. Three-Dimensional Printing of a Tyramine Hyaluronan Derivative with Double Gelation Mechanism for Independent Tuning of Shear Thinning and Postprinting Curing. ACS Biomater. Sci. Eng. 2018 , 4 , 3088 -3098. - · DOI
- (161) Kiyotake, E. A.; Douglas, A. W.; Thomas, E. E.; Nimmo, S. L.; Detamore, M. S. Development and Quantitative Characterization of the Precursor Rheology of Hyaluronic Acid Hydrogels for Bioprinting. Acta Biomater. 2019 , 95 , 176. - · DOI · Paper page
- (245) ASTM52900-15, I. ; ASTM International: West Conshohocken, PA, 2015. -
Cited by
Items 901–1,000 of 1,001
Polymer nanocomposites for biomedical applications
Islam, H., Hoque, M. E., & Santulli, C. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-824492-0.00016-7 · Cited by 7
Recent advancements in extrudable gel-based bioinks for biomedical settings
Raza, A., Mumtaz, M., Hayat, U., Hussain, N., Ghauri, M. A., Bilal, M., & Iqbal, H. M. N. (2022) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2022.103697 · Cited by 5
Hangad, M. V., Forigua, A., Scheck, K., Willerth, S. M., & Elvira, K. S. (2025) · Macromolecular Bioscience · doi:10.1002/mabi.202400464 · Cited by 4
Freeform 3D Printing of Cell-Adsorptive Cryogels with Shape-Recoverability
Castanheira, E. J., Monteiro, L. P. G., Sobreiro‐Almeida, R., Gaspar, V. M., Wittig, N. K., Correia, T. R., Birkedal, H., Rodrigues, J. M. M., & Mano, J. F. (2025) · ACS Materials Letters · doi:10.1021/acsmaterialslett.4c01836 · Cited by 4
Perry, A. C., Lan, X., Ma, Z., Li, H., Chu, Y., Mulet‐Sierra, A., Kunze, M., Westover, L., Chen, L., Ansari, K., et al. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.143559 · Cited by 4
3D Bioprinting Bioinks: an up-to-date overview
Moradi, A., Khosravi, N., Khanyile, B. S., Sharifianjazi, F., & Sorkhabi, M. (2024) · Journal of Composites and Compounds · doi:10.61186/jcc.6.3.3 · Cited by 4
Balters, L., & Reichl, S. (2025) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37961 · Cited by 4
González, M., Breuninger, A., Leis, F., Michaud, J. B., Sivakumar, S., Pautu, V., Jaconi, M. E., Jobin, M., & Roux, A. (2025) · BME Frontiers · doi:10.34133/bmef.0159 · Cited by 4
“Tissue engineering via 3D bioprinting allows cellular hydrogel constructs to be made with patient-specific anatomical geometry and mechanical properties with customized printability, shape fidelity, and bioactivity [ 8 ].”
Sustainable Materials in 3D Printing: Exploring the Potential of Microalgae
Racioppi, S., Stentella, S., Scognamiglio, V., & Antonacci, A. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57594 · Cited by 4
Chen, Y., Kong, M., Zhang, T., & Li, J. (2025) · Annals of Biomedical Engineering · doi:10.1007/s10439-025-03789-w · Cited by 4
Sithiwichankit, C., Suthithanakom, S., Chaiprabha, K., Melde, K., & Chancharoen, R. (2025) · Scientific Reports · doi:10.1038/s41598-025-15164-9 · Cited by 4
“In the printing of nonhomogeneous and delicate materials like cell-laden hydrogels and other biomaterials, rheological properties of such materials can be undetermined and vary over a wide range 46,47 , A small change in temperature can have dramatic effects on their rheological properties.”
Ding, L., Chen, L., Xu, Y., Li, C., Xu, D., Fan, X., Liu, Z., Shi, J., & Zhang, J. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2025.124263 · Cited by 5
3D‐Printed Mixed Ionic‐Electronic Conductive Polymer Composites for Long‐Term Bioelectronic Sensing
Bagatella, S., Roh, H., Cavallaro, M., Suriano, R., Levi, M., & Gumyusenge, A. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202501154 · Cited by 4
Gato-Diaz, U., Blanco-Garcia, S., Peixoto, D., Concheiro, Á., Alvarez‐Lorenzo, C., & Blanco‐Fernandez, B. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.5c00450 · Cited by 6
“45 GAC0 bioink transitioned from gel-like behavior at low strain ( G ′ > G ″ ) to liquid-like behavior at high strain ( G ′ G ″ ) and recovered the gel-like behavior once the strain was reduced to its resting state (0.5”
InfluentialIntegrating 3D Bioprinting with Organoid Technology-Based Breast Cancer Models for Drug Evaluation
Shukla, A. K., Shukla, S., Mongre, R. K., Upadhyay, A. M., Thiruppathi, G., Shukla, C. D., Mishra, S., & Dutta, S. D. (2025) · Organoids · doi:10.3390/organoids4040026 · Cited by 4
Grimm, M., Acero, F. Y. R., Safari, F., Venegas‐Bustos, D., Wagner, A., Presciutti, C., Chen, W., D’Este, M., & Wychowaniec, J. K. (2025) · ACS Polymers Au · doi:10.1021/acspolymersau.5c00129 · Cited by 4
Self-citationCastorina, S., Puleo, S., Crescimanno, C., & Pezzino, S. (2025) · Applied Sciences · doi:10.3390/app16010005 · Cited by 4
Liu, Y., Zhang, J., Jiang, T., Dai, Y., Xia, X., & Dong, M. (2025) · Food Chemistry · doi:10.1016/j.foodchem.2025.147688 · Cited by 4
Idnani, R., & Khan, S. (2025) · Bioprinting · doi:10.1016/j.bprint.2025.e00463 · Cited by 6
Bom, S., Carvalho, M., Prazeres, P., Santos, C. F., Martins, A. M., Ribeiro, H. M., & Marto, J. M. (2026) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2026.139780 · Cited by 4
Alparslan, C., & Bayraktar, Ş. (2026) · Surface Topography Metrology and Properties · doi:10.1088/2051-672x/ae41d1 · Cited by 6
Korkeamäki, J. T., Silen, R., Syverud, K., Mustafa, K., Rashad, A., & Miettinen, S. (2026) · Bioprinting · doi:10.1016/j.bprint.2026.e00479 · Cited by 4
Jongprasitkul, H., Parihar, V. S., Turunen, S., Kellomäki, M., Ferreira, A. M., & Fulton, D. A. (2026) · Bioprinting · doi:10.1016/j.bprint.2026.e00480 · Cited by 4
3D-Printed phosphoric acid-activated metakaolin-based geopolymers for acid mine drainage remediation
Tochetto, G. A., Colombo, P., Hotza, D., & Nagel-Hassemer, M. E. (2026) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2026.110024 · Cited by 6
Borgia, C., Curcio, F., Cassano, R., & Gagliardi, F. (2026) · Bioprinting · doi:10.1016/j.bprint.2026.e00483 · Cited by 4
Nguyen, M. H., Duong, G. H., Le, H. C., Le, H. C. T., Nguyen, M. H., Vuong, V., & Tan, T. P. (2026) · Materials Advances · doi:10.1039/d6ma00268d · Cited by 5
Yield stress fluids in microfluidics: research, applications and opportunities
Rahmani, H., & Taghavi, S. M. (2026) · Lab on a Chip · doi:10.1039/d5lc00864f · Cited by 4
Cruzeiro, A. D. C., Santana, L., Jaime, D. M., Ramôa, S. D. A. S., Alves, J. L., & Barra, G. M. D. O. (2024) · Rapid Prototyping Journal · doi:10.1108/rpj-11-2023-0413 · Cited by 4
Modeling of oral squamous cell carcinoma microenvironment- A 3D bioprinting approach
Chaurasia, A., Sivaramakrishnan, G., Asa’ad, F., Larsson, L., Daghrery, A., Marques, J. R. O. F., Spirito, F., Clemente, V. B., Apolônio, A. C. M., Alipour, M., et al. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00381 · Cited by 4
Günther, D., Bergerbit, C., Marsee, A., Vedaraman, S., Moliner, A. P., Bastard, C., Eelen, G., Gerardo‐Nava, J., Dewerchin, M. A., Carmeliet, P., et al. (2025) · Biofabrication · doi:10.1088/1758-5090/adae37 · Cited by 5
“…a key requirement to ensure sufficient oxygen and nutrient supply of the tissue, their sensitivity to hydrogel stiffness and the requirement of a soft matrix opposes with the need for stiff materials, in the range of kPa, to ensure the shape fidelity and stability of printed constructs [27, 28].”
The future of functional foods: innovations and advancements on the horizon
Tavares, L., de Azevedo, E. S., Sousa, L. R., Luís, J. L., Noreña, C. P. Z., & Oliveira, J. M. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-28862-3.00024-8 · Cited by 5
A ventilated perfused lung model platform to dissect the response of the lungs to viral infection
Derman, İ. D., Alioglu, M. A., Moses, J. C., Chroneos, Z. C., Yilmaz, Y. O., Banerjee, D., Koff, J. L., Rizvi, S. H. A., Klunk, D. N., Celik, N., et al. (2025) · Trends in biotechnology · doi:10.1016/j.tibtech.2025.03.012 · Cited by 6
Ceretti, E., Sharma, M., Ferraris, E., Ginestra, P. S., & Seiti, M. (2025) · CIRP Annals · doi:10.1016/j.cirp.2025.04.062 · Cited by 4
Creep of Alginate-Gelatin-Hyaluronic acid strands and cell viability after bioprinting
Palma, J. H., Bertuola, M., Wusener, A. E. G., Arregui, C. O., & Hermida, É. B. (2025) · Anais da Academia Brasileira de Ciências · doi:10.1590/0001-3765202520241453 · Cited by 4
Optimization of bio-ink using machine learning
Mukherjee, A., Sarker, S. K., Kumar, R., Sahani, A. K., & Das, B. (2023) · Elsevier eBooks · doi:10.1016/b978-0-443-18498-7.00016-8 · Cited by 4
Bioprinting of a Biomimetic Microenvironment for a Retinal Regenerative Approach
Belgio, B., Mantero, S., Iervolino, F., Potere, F., Levi, M., & Boschetti, F. (2024) · Applied Sciences · doi:10.3390/app14166980 · Cited by 4
“Indeed, at every time point, the cell viability was found to be higher than 90%.”
BackgroundMethodResultInfluentialImproved alginate bio-ink by recombinant self-assembled cell-sized spider-silk inspired-biopolymer
Robinson, D., Gubelbank, M., Sklan, E., & Re’em, T. T. (2025) · Bioprinting · doi:10.1016/j.bprint.2025.e00387 · Cited by 4
Jeon, O., Park, H., Lee, M. S., & McMillan, A. (2026) · Acta Biomaterialia · doi:10.1016/j.actbio.2026.09.029 · Cited by 4
Karamchand, L., Wagner, A., Alam, S. B., & Kulka, M. (2021) · Journal of Visualized Experiments · doi:10.3791/62519 · Cited by 4
3D printing of plant-based foods
de Godoi, F. C., Prakash, S., & Bhandari, B. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-89842-3.00001-4 · Cited by 4
Goncalves, B. G., Heise, R. M., & Banerjee, I. A. (2023) · Biomimetics · doi:10.3390/biomimetics8070548 · Cited by 4
Scaffolds for cultivated meat: technological considerations
Levi, S., Yen, F.-C., Baruch, L., & Machluf, M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-18767-4.00001-9 · Cited by 3
Design of polymeric biomaterials at multiscale
Perin, F., Spessot, E., & Motta, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-91821-3.00014-1 · Cited by 5
Ortega, M. A., León-Oliva, D. D., Boaru, D. L., Fraile‐Μartinez, O., Montero, C. G., Casanova, C., García‐Honduvilla, N., Buján, J., Sáez, M. A., Álvarez‐Mon, M., et al. (2025) · PubMed · doi:10.14670/hh-18-763 · Cited by 9
Polymer microsphere inks for semi-solid extrusion 3D printing at ambient conditions
Pohjola, J., Jokinen, M., Soukka, T., & Stolt, M. (2024) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2024.106783 · Cited by 3
Zeimaran, E., Pourshahrestani, S., Röder, J., Detsch, R., & Boccaccini, A. R. (2025) · Advanced Materials Interfaces · doi:10.1002/admi.202400913 · Cited by 3
Cold-temperature 3D bioprinting for cultured meat: A case of rainbow trout cell cultivation
Huang, Z., Niu, R., Du, Z., Xin, Q., Lao, J., Hu, H., Yu, J., Lu, Q., Chen, Q., Huang, X., et al. (2025) · Sustainable materials and technologies · doi:10.1016/j.susmat.2025.e01422 · Cited by 3
Qiu, Y., Zhang, Q., Wang, R., Chen, W., Li, X., Zhu, Y., Zhu, M., Wang, G., & Sun, H. (2025) · Journal of Materials Chemistry C · doi:10.1039/d5tc01231g · Cited by 3
Ji, Q., Tang, R., Liu, X., Yang, J., Liu, X., Li, Q., & Huang, R. (2025) · Biofabrication · doi:10.1088/1758-5090/aded37 · Cited by 3
“Three-dimensional (3D) bioprinting offers an advanced alternative, enabling the precise, layer-by-layer assembly of cells and biomaterials based on computer-aided design models [6, 7].”
Rheological characterization of hydrogel and implications towards biomedical applications
Shyam, R., & Palaniappan, A. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-29260-6.00012-3 · Cited by 3
Ismat, M. S., Amaid, M. S., Nawaz, A., Abbas, M., Parayangat, M., Kalathil, S., & Rehman, M. A. U. (2025) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2025.138600 · Cited by 3
Mirosław, P., Kosowska, K., Serafin, W., Piwowar, R., Romanik-Chruścielewska, A., Westphal, K., Wszola, M., & Klak, M. (2025) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2025.1680938 · Cited by 3
“…must be characterized by rheological properties such as storage modulus (G ′ ), which refers to elastic properties and serves as a measure of elastic shape retention, and loss modulus (G ″ ), which represents viscosity or the amount of energy dissipated in the sample (Schwab et al., 2020).”
Zhang, H., Stehle, Y. Y., Chen, L., Yang, M., Zhang, R., Lin, M., Wang, C., Yang, J., Hu, D., Huang, M., et al. (2025) · Journal of Materials Chemistry B · doi:10.1039/d5tb01499a · Cited by 3
A Mixing System for Uniform, Reproducible Viscous Bioinks Preparation
Singer, R., González-Martínez, D. A., Tafoya, A. A., Wang, Y., González‐Martínez, E., Carpio, M. B., Dabaghi, M., Moran-Mirabal, J. M., & Hirota, J. A. (2025) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5c01334 · Cited by 3
Oxidation‐Degradable Resins for 3D‐Printing of Cell‐Responsive Biomaterials
Santos, R. D., Wynn, W., Marquez, L., Hoque, E., Bruce, K., Yavitt, B. M., Harris, G. M., & Martin, J. R. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202522208 · Cited by 3
Interfacial Engineered Cellulose-Based HIPPEs for Thermal Energy Storage and 3D Printing
Dai, Q., Lv, J., Cheng, Y., Huang, S., Li, H., Yang, Z., Zhu, M., Bai, L., Li, Z., Liu, Y., et al. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.5c01933 · Cited by 3
Bioprinting Organs—Science or Fiction?—A Review From Students to Students
Murenu, N., Mussoni, C., Mier, M. S. A., Büttner, P., Chicaiza-Cabezas, N. A., Dai, Y. R., Faber, J., Fiedler, M., Lamberger, Z., Ng, X. J., et al. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202502103 · Cited by 5
Bioinks used in the repair of nerve injury in vivo
Wang, L., Zhou, X., Wang, S., Wen, F., Ullah, I., Zhang, W., Gao, X., Song, B., You, Z., & Li, H. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101643 · Cited by 3
Amini, M., Hosseini, H., Hashemi, S. A., & Arjmand, M. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202501324 · Cited by 3
“Beyond merely assessing filament formation, it is essential to examine filament homogeneity and uniformity, key factors in creating high-quality 3D structures [ 96 ].”
InfluentialPeptide-reinforced, photocrosslinkable PEG-based hydrogels
Russell, S., Jang, D., Thomas, J. A., Grysan, P., Sprandl, L., Biesalski, M., Korley, L. T. J., & Bruns, N. (2026) · RSC Applied Polymers · doi:10.1039/d5lp00335k · Cited by 3
Ye, M., Gao, J., Zheng, Z., Xin, D., Zhang, Z., Zhu, S., Zhang, Q., Zhang, Y., Xu, L., Shen, S., et al. (2026) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ae3347 · Cited by 4
“Extrusion printing requires bioink with sufficient mechanical strength to maintain structure; however, biocompatible inks are often too soft, resulting in an inhomogeneous distribution of cells and collapse along the z-axis during the printing process [11,12] .”
Nelson, M. L., Burgoyne, H. M., Kouchi, F. R., White, F., Rektor, A., Fujimoto, K. T., Sawyer, M., Tibbits, A., Toodeshki, E. H., Semodji, A. M., et al. (2026) · ACS Applied Bio Materials · doi:10.1021/acsabm.5c02206 · Cited by 3
Li, Y., Xu, M., Li, H., Ni, F., Xiao, H., Shen, H., Zeng, S., Ma, Y., & Zhang, L. (2026) · Advanced Healthcare Materials · doi:10.1002/adhm.202503936 · Cited by 3
Rheological assessment of printed overhang designs for starch, protein, and combined food inks
Khalil, M. I., Kondabathula, Y. K., Pal, R., Christopher, G. F., Maleky, F., & Egan, P. (2026) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2026.112463 · Cited by 3
AI-driven interpretation and prediction of embedded printability based on rheology
Zhou, X., Zhang, Z., Yu, J., Ma, L., Ma, S., Wu, B., Wang, Z., Zhang, T., Fang, Y., & Xiong, Z. (2026) · Bio-Design and Manufacturing · doi:10.1631/bdm.2500456 · Cited by 4
“Previous stud‐ ies highlighted the importance of rheological behaviors such as shear-thinning, self-healing, and yield-stress in de‐ termining printability in embedded bioprinting [8].”
Corneal Tissue Engineering Using Organoid Models for Vision Restoration: Translational Outlooks
Azhar, M., Malviya, R., Chandra, P., Srivastava, S., Alotaibi, A. D., & Abohashrh, M. (2026) · Tissue Engineering Part B Reviews · doi:10.1177/19373368251414466 · Cited by 3
Tan, J., Zhu, G., Yang, M., Wu, Q., Li, Y., Tan, L., & Meng, X. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.174040 · Cited by 3
Guan, J., Luo, X., He, X., & Li, B. (2026) · Journal of Energy Storage · doi:10.1016/j.est.2026.120969 · Cited by 3
Torres-Ambolumbet, V. C., Ocampo-Terreros, M., Anaya-Sampayo, L. M., & Garcia-Robayo, D. A. (2026) · Annals of Biomedical Engineering · doi:10.1007/s10439-026-04023-x · Cited by 3
Balancing Strength and Cell Viability in Gelatin Methacrylate/Gellan Gum Bioink Formulations
Backes, E. H., Pinto, L. A., Neto, J. D. F. G., Lima, T. P. L., Granja, P. L., Pessan, L. A., & Porcionatto, M. A. (2026) · ACS Omega · doi:10.1021/acsomega.5c09665 · Cited by 3
Jing, L., Su, L., You, S., Zeng, S., Zheng, Z., Xu, Y., Ma, Y., Gu, J. L., Liu, T., Liu, Z., et al. (2026) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2026.112691 · Cited by 3
Askari, E., Maaref, Y., Barough, M. S., Mohaghegh, N., Najafabadi, A. H., Hematabad, O. S., Jannati, S., Tibbits, G. F., & Akbari, M. (2026) · Biomaterials · doi:10.1016/j.biomaterials.2026.124133 · Cited by 4
Sousa, V., Sobreiro‐Almeida, R., van den Bersselaar, B. W. L., Meijer, E. W., Vantomme, G., Borges, J., & Mano, J. F. (2026) · Advanced Materials · doi:10.1002/adma.202521259 · Cited by 3
“Given that the printing fidelity can be influenced by both the ink stiffness and viscosity, the ability to independently modulate these two variables is paramount for elucidating their specific effect in 3D bioprinting [133].”
Muñoz-Silva, M., García-Álvarez, R., Pérez, E., Jiménez‐Jiménez, C., & Esteban-Arranz, A. (2026) · Polymers · doi:10.3390/polym18091038 · Cited by 3
“…particularly relevant because its surface functional groups promote interactions (e.g., hydrogen bonding and electrostatic interactions) with polymer chains, which can increase storage modulus (G ′ ), enhance yield stress, and improve filament stability and shape fidelity after deposition [2,158].”
InfluentialDong, L., Zheng, X., Li, Z., Alimu, R., Jiang, H., Aiyiti, W., Shuai, C., & Aihemaiti, P. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.152619 · Cited by 4
Thiolated Polymers in 3D Bioprinting: Control of Gelation
Haddadzadegan, S., Laffleur, F., & Bernkop‐Schnürch, A. (2026) · Advanced Materials · doi:10.1002/adma.73394 · Cited by 4
Wang, A. Y. L., Aviña, A. E., Liu, Y., & Kao, H.-K. (2025) · International Journal of Bioprinting · doi:10.36922/ijb025360364 · Cited by 3
Can Elastomers Combine Stiffness, Toughness and Fatigue Resistance?
Baur, E., & Amstad, E. (2026) · Advanced Materials · doi:10.1002/adma.74087 · Cited by 3
Direct ink writing of bone-specific implantable scaffolds and devices
Dutta, S. D., & Lim, K. (2026) · Progress in Materials Science · doi:10.1016/j.pmatsci.2026.101796 · Cited by 3
Development of novel 3D printable inks for protein delivery
Alzhrani, R. F., Xu, H., Zhang, Y., Maniruzzaman, M., & Cui, Z. (2024) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2024.124277 · Cited by 3
Ginesi, R. E., Doutch, J., & Draper, E. R. (2024) · Faraday Discussions · doi:10.1039/d4fd00185k · Cited by 3
de Villiers, M., Kotzé, A. F., & Plessis, D. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00380 · Cited by 4
Tamimi, M., Bagheri‐Khoulenjani, S., Narain, R., & Rajabi, S. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-16168-1.00019-2 · Cited by 3
Extrusion‐Based Printing of Nanostructured Fatty Acid Gels Incorporated in Hydrogels
Amirfattahi, S., Freeman, C. J., Honaryar, H., Ghazali, H. S., Kim, K., & Niroobakhsh, Z. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57328 · Cited by 3
Kim, S. J., Yoon, D., Choi, Y., Lee, G., Nam, Y., & Park, J. (2025) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2025.117688 · Cited by 3
Palaniappan, A., Ramesh, P., Maya, B., & Shyam, R. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-29260-6.00016-0 · Cited by 3
Palacín-García, R., Goñi, L., & Río, T. G.-D. (2025) · Biomimetics · doi:10.3390/biomimetics10080491 · Cited by 3
“These characteristics must be considered when designing bioinks for specific tissue engineering applications [53,54].”
Murenu, N., Faber, J., Soufivand, A. A., Buss, M., Schaefer, N., & Budday, S. (2025) · Macromolecular Bioscience · doi:10.1002/mabi.202500204 · Cited by 4
“Despite their importance, the influence of different macroporous mesostruc-tures has hardly been investigated due to challenges in maintaining structural integrity and shape fidelity during 3D bio-printing [14, 15].”
Bharadwaj, T., Chrungoo, S., Jenamani, A. N. D. S., Pradhan, S. S., & Verma, D. K. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2025.124791 · Cited by 4
Ink Art Three‐Dimensional Big Data Three‐Dimensional Display Index Prediction Model
Cao, X. (2021) · Complexity · doi:10.1155/2021/5564361 · Cited by 3
“proposed a fluid flow model based on the Lattice Boltzmann Equation (LBE) and used this method to achieve a good real-time ink diffusion effect in a real-time rendering system, but the method that converged the speed is too slow and not suitable for real-time rendering systems for 3D objects [11].”
MethodFresh 3D Printing of Double Crosslinked Hyaluronic Acid/Pectin Hydrogels
Catori, D. M., Lorevice, M. V., da Silva, L. C. E., Candido, G., Millás, A. L. G. M., & de Oliveira, M. G. (2022) · Macromolecular Symposia · doi:10.1002/masy.202200050 · Cited by 3
Dong, J., Zhou, J., Tang, H., Chen, B., & Huang, L. (2023) · Biofabrication · doi:10.1088/1758-5090/ace47d · Cited by 4
“Additional challenges associated with bioprinting must also be addressed, such as the high shear stress on cells and nozzle clogging [24, 25].”
Optimization of the FRESH 3D Printing Method Applied to Alginate – Cellulose-Based Hydrogels
Seiti, M., Rovetta, R., Ferraro, R. M., Ferraris, E., & Ceretti, E. (2023) · Lecture notes in networks and systems · doi:10.1007/978-3-031-38274-1_41 · Cited by 3
Direct Fabrication of Glycoengineered Cells via Photoresponsive Thiol–ene Reaction
Otaka, A., Hirota, T., & Iwasaki, Y. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.3c01987 · Cited by 3
Fully synthetic, tunable poly(α-amino acids) as the base of bioinks curable by visible light
Golunova, A. S., Dvořáková, J., Velychkivska, N., Strachota, B., Dydowiczová, A., Trousil, J., & Proks, V. (2024) · Biomedical Materials · doi:10.1088/1748-605x/ad3f62 · Cited by 4
“Moreover, biomimetic ligands can be conjugated to PolyAAs to promote cell adhesion and proliferation [30], overcoming a major limitation of synthetic polymers, the lack of intrinsic bioactive moieties [7, 9].”
BackgroundDecellularized Tissue-Derived Materials as Advanced Bioinks
Yoon, J., & Jang, J. (2024) · Springer eBooks · doi:10.1007/978-3-031-56363-8_44 · Cited by 3
Qavi, I., Halder, S., & Tan, G. Z. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4584982 · Cited by 3
Biopolymer-Based Therapeutics: Processing, Applications, and Future Prospects
Cozorici, D., Radu, I., Blanzeanu, E., & Zaharia, C. (2026) · Advanced structured materials · doi:10.1007/978-981-95-2469-3_15 · Cited by 2
Cross‐Linking Strategies for Silk‐Protein‐Based Inks for 3D Printing
Dong, X., Liu, F., Wang, L., Xu, L., Pan, H., & Qi, J. (2023) · ChemistrySelect · doi:10.1002/slct.202301395 · Cited by 2
Clinical-relevant sized tubular capillary mimicries by sacrificial core-sheath electrospinning
Chen, Y., & Zhou, Y. (2024) · Manufacturing Letters · doi:10.1016/j.mfglet.2024.09.056 · Cited by 2
Metadata
- Authors
- Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J.
- Affiliations
- AO Foundation (CH)
- Utrecht University (NL)
- Corresponding author
- Malda, Jos
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-08-28
- Volume
- 120
- Issue
- 19
- Pages
- 10850-10877
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- PMC
- PMC7564085
- OpenAlex
- W3082213210
- Cited by
- 1,359
- References
- 287
- Citations by year
- 2026: 305 · 2025: 283 · 2024: 280 · 2023: 202 · 2022: 176 · 2021: 107 · 2020: 6
- FWCI
- 10.29
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Chemical Reviews (publishedVersion, cc-by-nc-nd)
- PubMed Central (publishedVersion)
- PubMed (publishedVersion)
- University of Twente Research Information (publishedVersion, cc-by-nc-nd)
- HAL (submittedVersion)
- Utrecht University Repository (Utrecht University) (submittedVersion, other-oa)
- University of Twente Research Information (submittedVersion, cc-by-nc-nd)
- Funders
- AO Foundation (3D OC)
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek (024.003.013)
- ReumaNederland (LLP12, LLP22)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Keywords
- bioinks, 3D bioprinting, printability, shape fidelity, hydrogels, extrusion-based bioprinting, rheology, physicochemical parameters, prediction model
- MeSH terms
- Humans, Ink, Tissue Engineering, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.