Printability and Shape Fidelity of Bioinks in 3D Bioprinting
Open accessThe DOI matches its Crossref record; 285 of the 287 references it cites were found in a registry or an index.
Abstract
Three-dimensional bioprinting uses additive manufacturing techniques for the automated fabrication of hierarchically organized living constructs. The building blocks are often hydrogel-based bioinks, which need to be printed into structures with high shape fidelity to the intended computer-aided design. For optimal cell performance, relatively soft and printable inks are preferred, although these undergo significant deformation during the printing process, which may impair shape fidelity. While the concept of good or poor printability seems rather intuitive, its quantitative definition lacks consensus and depends on multiple rheological and chemical parameters of the ink. This review discusses qualitative and quantitative methodologies to evaluate printability of bioinks for extrusion- and lithography-based bioprinting. The physicochemical parameters influencing shape fidelity are discussed, together with their importance in establishing new models, predictive tools and printing methods that are deemed instrumental for the design of next-generation bioinks, and for reproducible comparison of their structural performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures














Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [30]
The cited source says what the claim attributes to it.
In the citing paper
“However, the successful fabrication of stable 3D constructs relies on hydrogels with optimized rheological behavior, structural stability, and physicochemical properties that ensure printability and shape fidelity [7,8,9].”
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Self-citationHinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Fibrinogen and fibrin structure and functions
MOSESSON, M. W. (2005) · Journal of Thrombosis and Haemostasis · doi:10.1111/j.1538-7836.2005.01365.x · Cited by 1,695
Bioinks for 3D bioprinting: an overview
Gungor-Ozkerim, P. S., Inci, I., Zhang, Y. S., Khademhosseini, A., & Dokmeci, M. R. (2018) · Biomaterials Science · doi:10.1039/c7bm00765e · Cited by 1,428
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Research works printed but not linked: 5
- (126) Chimene, D.; Kaunas, R.; Gaharwar, A. K. Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies. Adv. Mater. 2020 , 32 , 1902026. - · DOI · Paper page
- (129) Mezger, T. G. The Rheology Handbook , 3rd revised ed.; Vincentz Network, 2011. -
- (156) Petta, D.; Grijpma, D. W.; Alini, M.; Eglin, D.; D ' Este, M. Three-Dimensional Printing of a Tyramine Hyaluronan Derivative with Double Gelation Mechanism for Independent Tuning of Shear Thinning and Postprinting Curing. ACS Biomater. Sci. Eng. 2018 , 4 , 3088 -3098. - · DOI
- (161) Kiyotake, E. A.; Douglas, A. W.; Thomas, E. E.; Nimmo, S. L.; Detamore, M. S. Development and Quantitative Characterization of the Precursor Rheology of Hyaluronic Acid Hydrogels for Bioprinting. Acta Biomater. 2019 , 95 , 176. - · DOI · Paper page
- (245) ASTM52900-15, I. ; ASTM International: West Conshohocken, PA, 2015. -
Cited by
Items 501–600 of 1,001
Cho, J., Park, C. H., Sundharbaabu, P. R., Ju, S.-U., Shin, D., Heo, J. H., Kim, M., & Lee, J. H. (2025) · ACS Nano · doi:10.1021/acsnano.5c07220 · Cited by 22
Self-driving bioprinting laboratories
Liu, S., Kaur, N., Song, D.-H., Moses, J. C., & Ozbolat, I. T. (2026) · Biofabrication · doi:10.1088/1758-5090/ae3645 · Cited by 21
3D printing: Economical and supply chain independent single-use plasticware for cell culture
Satzer, P., & Achleitner, L. (2022) · New Biotechnology · doi:10.1016/j.nbt.2022.03.002 · Cited by 19
Liao, Z., Niu, Y., Wang, Z., Chen, J., Sun, X., Dong, L., & Wang, C. (2022) · Advanced Science · doi:10.1002/advs.202203236 · Cited by 18
Nano-Electrochemical Characterization of a 3D Bioprinted Cervical Tumor Model
Becconi, M., Zio, S. D., Falciani, F., Santamaria, M., Malferrari, M., & Rapino, S. (2023) · Cancers · doi:10.3390/cancers15041327 · Cited by 20
“Printability is defined herein by a printability index Pr [52]; high geometric accuracy result in a Pr = 1, while Pr < 1 corresponds to a round-shaped transversal geometry and Pr > 1 to an irregular-shaped transversal geometry.”
BackgroundBhatt, S. S., Thakur, G., & Nune, M. (2023) · Materials Today Proceedings · doi:10.1016/j.matpr.2023.02.251 · Cited by 28
3D Bioprinting for Tumor Metastasis Research
Lin, M., Tang, M., Duan, W., Xia, S., Liu, W., & Wang, Q. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.3c00239 · Cited by 19
3D Bioprinting of Hyaline Articular Cartilage: Biopolymers, Hydrogels, and Bioinks
Volova, L. T., Kotelnikov, G. P., Shishkovsky, I. V., Volov, D. B., Ossina, N., Ryabov, N. A., Komyagin, A. V., Kim, Y. H., & Alekseev, D. G. (2023) · Polymers · doi:10.3390/polym15122695 · Cited by 23
“The main TDB techniques, depending on the design of the 3D bioprinter, include the microextrusion, inkjet, and laser [95,219,309,310].”
MethodPre‐Crosslinking with Hydrogel Microparticles Enhances the Printability of Alginate‐Based Inks
Hazur, J., Röder, J., Czwalinna, J., Schubert, D. W., & Boccaccini, A. R. (2023) · Macromolecular Materials and Engineering · doi:10.1002/mame.202200675 · Cited by 19
Engineering Innervated Musculoskeletal Tissues for Regenerative Orthopedics and Disease Modeling
Zhou, Z., Liu, J., Xiong, T., Liu, Y., Tuan, R. S., & Li, Z. A. (2024) · Small · doi:10.1002/smll.202310614 · Cited by 22
Pal, S., & Asha, S. K. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.112761 · Cited by 19
Printability of Nixtamalized Corn Dough during Screw-Based Three-Dimensional Food Printing
Rodríguez-Herrera, V. V., Umeda, T., Kozu, H., Sasaki, T., & Kobayashi, I. (2024) · Foods · doi:10.3390/foods13020293 · Cited by 19
“Extrusion-based 3DFP can be performed through three different mechanisms: air pressure, screw extrusion, and syringe extrusion [11].”
BackgroundHernández-Sosa, A., Mercado-Rico, J., Usala, E., Cataldi, G., Esteban-Arranz, A., Penott-Chang, E. K., Müller, A. J., González, Z., Espinosa, E., & Hernández, R. (2024) · Polymer · doi:10.1016/j.polymer.2024.126845 · Cited by 19
“The rheology and mechanical properties of the biomaterial ink affect the final quality and applicability of the 3D constructs [14,15].”
Kosowska, K., Korycka, P., Jankowska-Snopkiewicz, K., Gierałtowska, J., Czajka, M., Florys, K., Dec, M., Romanik-Chruścielewska, A., Małecki, M., Westphal, K., et al. (2024) · Nanomaterials · doi:10.3390/nano14090760 · Cited by 22
“…characterized by rheological properties, such as the storage modulus (G ′ ), which refers to the elastic properties and serves as a measure of retaining the elastic shape, as well as the loss modulus (G ′′ ), which represents the viscous part or the amount of energy dissipated in the sample [59].”
BackgroundLe, H. M. C., Hassan, K., Ramezanpour, M., Campbell, J. A., Tùng, T. T., Vreugde, S., & Lošić, D. (2024) · Journal of Materials Chemistry B · doi:10.1039/d4tb00142g · Cited by 19
Monteiro, M. V., Rocha, M., Carvalho, M. T., Freitas, I., Amaral, A. J. R., Sousa, F. L., Gaspar, V. M., & Mano, J. F. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c11188 · Cited by 20
3D Bioprinting of Liquid High‐Cell‐Proportion Bioinks in Liquid Granular Bath
Jiang, J., Yuan, C., Zhang, X., Gu, L., Yao, Y., Wang, X., He, Y., & Shao, L. (2024) · Advanced Materials · doi:10.1002/adma.202412127 · Cited by 25
Teixeira, M. C., Lameirinhas, N. S., Carvalho, J. P. F., Luís, J. L., Oliveira, H., Oliveira, J. M., Silvestre, A. J. D., Vilela, C., & Freire, C. S. R. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.136958 · Cited by 19
Thermoresponsive Polymers with Reversible Sol–Gel Transition for 4D Bioprinting
Santoni, S., Mauri, E., Repossini, L., Vangosa, F. B., Colosimo, B. M., Sponchioni, M., & Moscatelli, D. (2025) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c04117 · Cited by 19
Recent Trends in Biofabrication Technologies for Studying Skeletal Muscle Tissue-Related Diseases
Cho, S., & Jang, J. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.782333 · Cited by 20
“The wall shear forces exerted on the shear-thinning polymer induce the alignment of inherent polymer molecules (Compton and Lewis, 2014; Schwab et al., 2020).”
BackgroundSakai, S., Harada, R., & Kotani, T. (2021) · Biomolecules · doi:10.3390/biom11121908 · Cited by 20
Storable Cell-Laden Alginate Based Bioinks for 3D Biofabrication
Kostenko, A., Connon, C. J., & Swioklo, S. (2022) · Bioengineering · doi:10.3390/bioengineering10010023 · Cited by 20
“Viscoelastic liquids are known to be frequency dependent whereas materials that exhibit gel-like properties are less frequency dependent [22,31,32].”
BackgroundA review of direct ink writing of polymer derived ceramics
Bishop, V., Mathur, S. C., Nguyen, N. H., Sharma, B., Drouin, M., Li, B., Park, C., & Wei, W. (2025) · Virtual and Physical Prototyping · doi:10.1080/17452759.2025.2499938 · Cited by 18
“This flow point is identified by the intersection of the G ′ and G ′′ curves, and beyond this point, the material’s viscous behaviour dominates [205].”
Modified Polysaccharides: Potential Biomaterials for Bioprinting
Jiang, T., Yang, Y. K., Lin, Z., Yang, H., & Luo, Z. (2025) · Journal of Functional Biomaterials · doi:10.3390/jfb16090338 · Cited by 18
“In an extrusion printing system, a bioink changes from an amorphous-dominant state before extrusion to a liquid-dominant state during extrusion due to the lowered viscosity, owing to the shear-thinning property, before returning to an amorphous-dominant state after extrusion [143,144].”
Yu, J., Xie, F., Gong, X., Chen, D., Niu, Y., Ping, Z., An, M., Liu, Y. W., & Leng, J. (2025) · Advanced Materials · doi:10.1002/adma.202516698 · Cited by 19
“Additionally, possessing a low viscosity below 20 Pa ⋅ s at shear rates ranging from 10 to 100 s − 1 [44], these inks ensure easy flow through the printer’s vat, making them ideally suited for DLP technology (Figure S2).”
Multifunctional implantable hydrogels: Smart platforms at the forefront of biomedical innovation
NAGAY, B. E., Janghour, L. M., El-Khordagui, L. K., Akhavan, B., Barão, V. A. R., Dananjaya, V., Abeykoon, C., El-Habashy, S. E., & Dodda, J. M. (2026) · Materials Today Bio · doi:10.1016/j.mtbio.2026.102940 · Cited by 31
“Moreover, shear-thinning hydrogel inks with a flow index value between 0.3 and 0.5 enable more controlled extrusion, achieving printing resolutions below 200 μ m without compromising mechanical stability [95].”
InfluentialQuantitative Assessment of Hydrogel Printability in Extrusion Bioprinting
Yu, S., Luo, Y., Chen, S., Fan, J., & Zhang, H. (2026) · Gels · doi:10.3390/gels12030189 · Cited by 18
“…enable the identification of formulation and processing conditions that achieve an optimal balance between printability metrics (e.g., filament fusion ratio, shape fidelity index) and biological performance indicators (e.g., cell viability, proliferation, extracellular matrix deposition) [95,96].”
3D bioprinting of tissues and organs for systemic diseases and localized injuries
Ng, W. K., & Bártolo, P. (2026) · Military Medical Research · doi:10.1016/j.mmr.2026.100006 · Cited by 30
“The performance of a bio-ink directly influences not only the printability and structural fidelity of the fabricated construct but also cell viability, functionality, and long-term tissue development [93].”
Huang, H., Ayariga, J. A., Ning, H., Nyairo, E., & Dean, D. R. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102120 · Cited by 21
Eucalyptus bleached kraft pulp-ionic liquid inks for 3D printing of ionogels and hydrogels
Hopson, C., Rigual, V., Alonso, M. V., Oliet, M., & Rodríguez, F. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.120897 · Cited by 18
Zhu, Y., Kankuri, E. M., Zhang, X., Wan, Z., Wang, X., Huan, S., Bai, L., Liu, S., & Rojas, O. J. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c03421 · Cited by 18
Kharaghani, D., Kaffashsaei, E., Haider, M. K., & Kim, I. S. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms24119464 · Cited by 18
“Among the trials, the dilemma is that too soft bioinks cannot be stacked in a 3D structure with the desired shape [5].”
BackgroundA systematic approach to improve printability and cell viability of methylcellulose-based bioinks
Jergitsch, M., Alluè-Mengual, Z., Pérez, R. A., & Mateos‐Timoneda, M. A. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.127461 · Cited by 18
3D-Printable Sustainable Bioplastics from Gluten and Keratin
Alshehhi, J. R. M. H., Wanasingha, N., Balu, R., Mata, J. P., Shah, K. V., Dutta, N. K., & Choudhury, N. R. (2024) · Gels · doi:10.3390/gels10020136 · Cited by 18
“…the overall high accuracy levels exceed those of other materials like silk This can be attributed to interaction-driven adjacent filament fusion and gravity-driven deformation of the filament along the axial direction with an increase in height [52]. fibroin and soy protein-based systems.”
BackgroundSuitability of Gelatin Methacrylate and Hydroxyapatite Hydrogels for 3D-Bioprinted Bone Tissue
Stolarov, P., Vries, J. D., Stapleton, S., Morris, L., Martyniak, K., & Kean, T. J. (2024) · Materials · doi:10.3390/ma17051218 · Cited by 18
“Print fidelity is the degree to which the bioprinted structure holds its shape, and it is related to the viscosity of the bioink [22].”
BackgroundKim, H. S., Kim, J. S., Hwang, J., Lee, I. Y., & Lee, K. Y. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.150551 · Cited by 18
Rahman, A. M., Bedsole, C. O., Akib, Y. M., Hamilton, J., Rahman, T. T., Shaw, B. D., & Pei, Z. (2024) · Biomimetics · doi:10.3390/biomimetics9040251 · Cited by 19
“Shape fidelity is the ability of a printed part to maintain its shape compared with the shape in the computer design [20,21].”
BackgroundWu, Z., Yao, H., Sun, H., Gu, Z., Hu, X. Y., Yang, J., Shi, J., Yang, H., Dai, J., Chong, H., et al. (2024) · Materials Today Bio · doi:10.1016/j.mtbio.2024.101080 · Cited by 24
“Rheological characterization is the most direct and effective means of understanding the printing performance of composite inks, such as extrusion smoothness and shape fidelity [26,27].”
Bagatella, S., Guida, L., Scagnetti, G., Gariboldi, E., Salina, M., Galimberti, N., Castoldi, L., Cavallaro, M., Suriano, R., & Levi, M. (2024) · Polymer · doi:10.1016/j.polymer.2024.127899 · Cited by 18
Wang, Y., Hou, Y., Vyas, C., Huang, B., & Bártolo, P. (2025) · Materials Futures · doi:10.1088/2752-5724/adb7f6 · Cited by 21
“The flow of bioinks during extrusion is driven when the applied pressure surpasses the yield stress, which may result in the encapsulated cells experiencing significant shear stress [44].”
Fernandes, P. C. G., Filgueiras, V., Matte, B. F., & Lopes, J. H. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.144720 · Cited by 18
Mimicking the liver function in micro-patterned units: Challenges and perspectives in 3D bioprinting
Heydari, Z., Pooyan, P., Bikmulina, P. Y., Pozdnyakov, A. A., Fomin, V. V., Seydi, H., Shpichka, A. I., Timashev, P. S., & Vosough, M. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00208 · Cited by 18
Dee, P., Tan, S., & Ferrand, H. L. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v8i2.551 · Cited by 18
“Besides, the rectangular shape of majority of the pores as seen from the top view also points to good print accuracy and print fidelity[42].”
BackgroundA Reactive Inkjet Printing Process for Fabricating Biodegradable Conductive Zinc Structures
Sui, Y., Radwan, A. N., Gopalakrishnan, A., Dikshit, K. V., Bruns, C. J., Zorman, C. A., & Whiting, G. L. (2022) · Advanced Engineering Materials · doi:10.1002/adem.202200529 · Cited by 18
Zhou, K., Feng, M., Mao, H., & Gu, Z. (2022) · Biomaterials Science · doi:10.1039/d2bm00632d · Cited by 19
Biomaterials of human source for 3D printing strategies
Maia, J. R., Sobreiro‐Almeida, R., Cleymand, F., & Mano, J. F. (2023) · Journal of Physics Materials · doi:10.1088/2515-7639/acada1 · Cited by 18
Stenlund, P., Enstedt, L., Gilljam, K. M., Standoft, S., Ahlinder, A., Lundin, M., Lund, H., Millqvist‐Fureby, A., & Berglin, M. (2023) · Polymers · doi:10.3390/polym15122627 · Cited by 18
“To achieve acceptable printability, the ink needs to have shear thinning to flow through the nozzle when subjected to low forces [38,39].”
BackgroundThermoresponsive polymers for cell support: poloxamers as a case study of promise and challenge
Clerkin, S., Singh, K., Winning, D., Krupa, I., Crean, J. K. G., Brougham, D. F., & Wychowaniec, J. K. (2025) · Journal of Materials Chemistry B · doi:10.1039/d5tb00588d · Cited by 20
Microporosity engineered printable silk/graphene hydrogels and their cytocompatibility evaluations
Dorishetty, P., Balu, R., Gelmi, A. A., Mata, J. P., Quigley, A. F., Dutta, N. K., & Choudhury, N. R. (2022) · Materials Today Advances · doi:10.1016/j.mtadv.2022.100233 · Cited by 18
Cordova, D. J., Rodriguez, A. A., Woodward, S. C., & Crosby, C. O. (2024) · HardwareX · doi:10.1016/j.ohx.2024.e00510 · Cited by 18
Artificial Cells and HepG2 Cells in 3D‐Bioprinted Arrangements
Westensee, I. N., Paffen, L. J. M. M., Pendlmayr, S., Andres, P. D. D., Ramos‐Docampo, M. A., & Städler, B. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202303699 · Cited by 17
Three-Dimensional Bioprinting: The Ultimate Pinnacle of Tissue Engineering
Arumugam, P., Kaarthikeyan, G., & Eswaramoorthy, R. (2024) · Cureus · doi:10.7759/cureus.58029 · Cited by 23
Bioinks for bioprinting using plant-derived biomaterials
Hasan, M. M., Ahmad, A., Akter, M. Z., Choi, Y., & Yi, H. (2024) · Biofabrication · doi:10.1088/1758-5090/ad6932 · Cited by 20
“This interplay underscores the importance of refining bioprinting methods within the confines of the biofabrication window, to create tissue constructs that are both structurally faithful and functionally robust [9].”
InfluentialZhang, Y., Lv, J., Qiu, Z., & Chen, L. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.138794 · Cited by 17
Puistola, P., Huhtanen, S., Hopia, K., Miettinen, S., Mörö, A., & Skottman, H. (2025) · Bioprinting · doi:10.1016/j.bprint.2025.e00391 · Cited by 17
Chen, X., Zhou, Y., Zhou, S., Zhang, D., Zeng, L., Zhou, C., & Liu, M. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.08.024 · Cited by 23
“Generally, when the dimensions of the 3D-printed models closely match those of the theoretical models, the printed models have shape fidelity [48].”
Choi, D. J., Choi, K. K., Park, S. J., Kim, Y., Chung, S. H., & Kim, C. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms222111600 · Cited by 17
Solvent‐Cast 3D Printing of Biodegradable Polymer Scaffolds
Tolbert, J. W., Hammerstone, D. E., Yuchimiuk, N., Seppala, J. E., & Chow, L. W. (2021) · Macromolecular Materials and Engineering · doi:10.1002/mame.202100442 · Cited by 17
Zhu, D., Peng, X., & Xiao, P. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103154 · Cited by 23
Three‐dimensional printing and its application to legume proteins: A review
Chakraborty, P., Eqbal, M. D., & Ahmed, J. (2022) · Legume Science · doi:10.1002/leg3.172 · Cited by 18
“However, when the force is applied, the ink deforms and starts to flow in a high-shear zone through the nozzle (Schwab et al., 2020; Seoane-Viano et al., 2021).”
BackgroundThe Promise and Challenges of Bioprinting in Tissue Engineering
Martin, R., & Joung, D. (2024) · Micromachines · doi:10.3390/mi15121529 · Cited by 19
Yue, H., Wang, Y., Fernandes, S., Vyas, C., & Bártolo, P. (2025) · Macromolecular Bioscience · doi:10.1002/mabi.202400587 · Cited by 16
Trends in 4D Printed Shape Memory Biomaterials for Tissue Engineering Applications
Kumar, D., Malviya, R., Sridhar, S. B., Wadhwa, T., Talath, S., & Shareef, J. (2025) · Current Pharmaceutical Design · doi:10.2174/0113816128374450250502051929 · Cited by 19
Thakare, K., Jerpseth, L., Pei, Z., & Qin, H. (2022) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp6020045 · Cited by 16
Wang, H., Hao, Y., Guo, K., Liu, L., Xia, B., Gao, X., Zheng, X., & Huang, J. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202303505 · Cited by 19
Ghosh, A., Sanyal, A., & Mallick, A. (2023) · Exploration of Medicine · doi:10.37349/emed.2023.00184 · Cited by 17
Koo, Y., & Kim, G. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202316222 · Cited by 16
Iberite, F., Badiola-Mateos, M., Loggini, S., Paci, C., Ruspi, J., Iachetta, D., Mannini, A., Gruppioni, E., & Ricotti, L. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00338 · Cited by 19
Lee, S., Son, M., Lee, J., Byun, I., Kim, J.-W., Kim, J., & Seonwoo, H. (2024) · Polymers · doi:10.3390/polym16081137 · Cited by 16
“Bioink properties also include viscosity, viscoelasticity, hydrophilicity, and shear-thinning properties that affect printability and should be considered when selecting bioinks [38,39].”
BackgroundGalocha-León, C., Antich, C., Voltes-Martínez, A., Marchal, J. A., Mallandrich, M., Halbaut, L., Souto, E. B., Gálvez‐Martín, P., & Clares, B. (2024) · Drug Delivery and Translational Research · doi:10.1007/s13346-024-01596-9 · Cited by 16
Poly(ethylene‐glycol)‐Dimethacrylate (PEGDMA) Composite for Stereolithographic Bioprinting
Chang, S., Lee, J. Z. W., Ranganath, A. S., Ching, T., & Hashimoto, M. (2024) · Macromolecular Materials and Engineering · doi:10.1002/mame.202400143 · Cited by 16
Gasmi, A., Pélegris, C., Davidovits, R., Guessasma, M., Tortajada, H., & Jean, F. (2024) · Ceramics · doi:10.3390/ceramics7040087 · Cited by 16
Vaseghi, A., Sadeghizadeh, M., Herb, M., Grumme, D., Demidov, Y., Remmler, T., & Maleki, H. H. (2024) · ACS Applied Bio Materials · doi:10.1021/acsabm.4c00697 · Cited by 18
Qavi, I., Halder, S., & Tan, G. Z. (2024) · Progress in Additive Manufacturing · doi:10.1007/s40964-024-00828-1 · Cited by 20
“Beyond a ZSV threshold of 60 × 104 mPa.s, PSC begins to rise again, as viscous forces become strong enough to counteract flow deformations, thus preserving structural integrity [20, .”
InfluentialMehdikhani, M., Huri, P. Y., Poursamar, S. A., Etemadi, N., Gökyer, Ş., Navid, S., Farzan, M., Farzan, M., Babaei, M., & Rafienia, M. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.136692 · Cited by 19
Koirala, S., Prakash, S., Karim, A., & Bhandari, B. (2025) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2025.103924 · Cited by 16
Multiscale metal-based nanocomposites for bone and joint disease therapies
Wang, Y., Jan, H., Zheng, Z., Zhou, L., Teng, K., Chen, Y., Xu, J., Xie, D., Chen, D., Xu, J., et al. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101773 · Cited by 23
“Furthermore, 3D printed scaffolds containing MNPs showed stimuli-responsive behavior, such as adapting to mechanical stress or releasing osteogenic factors (e.g. BMP-2) in response to pH changes or magnetic fields, allowing dynamic control of bone regeneration [340].”
Photocrosslinked poly(γ-glutamic acid) hydrogel for 3D bioprinting
Kim, H. C., Kim, E., Hong, B. M., Park, S. A., & Park, W. H. (2021) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2021.104864 · Cited by 17
Multifunctional Hydrogel Materials for Advanced Neural Interfaces
Ma, C., Li, W., Gao, C. C., Li, X., She, J., Zou, Z., Zhang, D., Jin, Y., Xu, C., Liu, B., et al. (2025) · Small Methods · doi:10.1002/smtd.202501134 · Cited by 18
Progressive Insights into 3D Bioprinting for Corneal Tissue Restoration
Namlı, İ., Gupta, D., Singh, Y. P., Datta, P., Rizwan, M., Baykara, M., & Ozbolat, I. T. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202503372 · Cited by 22
González‐Gamboa, I., Velázquez-Lam, E., Lobo-Zegers, M. J., Frías-Sánchez, A. I., Negrete, J. A. T., Monroy-Borrego, A. G., Menchaca, J. L., Williams, L., Lunello, P., Ponz, F., et al. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.907601 · Cited by 15
“We also present an assessment of filament uniformity by characterizing the variations in thickness along filaments printed with GelMA, GelMA-TuMV, and GelMA with cells (Schwab et al., 2020).”
BackgroundEtefagh, A. H., & Razfar, M. R. (2023) · Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture · doi:10.1177/09544054231202219 · Cited by 18
“33 Process parameters are air pressure, bio-material ink temperature, print height, and print speed.”
Chowdhury, S. R., Mondal, G., Ratnayake, P., & Basu, B. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.3c01422 · Cited by 15
de Leeuw, A. M., Graf, R., Lim, P. J., Zhang, J., Schädli, G. N., Peterhans, S., Rohrbach, M., Giunta, C., Rüger, M., Rubert, M., et al. (2024) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2024.1310289 · Cited by 16
Buduo, C. A. D., Lunghi, M., Kuzmenko, V., Laurent, P., Rosa, G. D., Fante, C. D., Nogare, D. E. D., Jug, F., Perotti, C. G., Eto, K., et al. (2024) · Advanced Science · doi:10.1002/advs.202308276 · Cited by 24
Chrungoo, S., Bharadwaj, T., & Verma, D. K. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.131123 · Cited by 15
Carracciuolo, L., & D’Amora, U. (2024) · Applied Sciences · doi:10.3390/app14146110 · Cited by 15
Additive-free graphene-based inks for 3D printing functional conductive aerogels
Erfanian, E., Goodarzi, M., Banvillet, G., Sharif, F., Arjmand, M., Rojas, O. J., Kamkar, M., & Sundararaj, U. (2024) · Journal of Materials Chemistry A · doi:10.1039/d4ta03082f · Cited by 15
Marques, A. M. L., Oliveira, S. M., Martins, A. J., Bourbon, A. I., Rousta, N., Taherzadeh, M. J., Teixeira, J. A., Cerqueira, M. Â., & Pastrana, L. M. (2024) · Future Foods · doi:10.1016/j.fufo.2024.100530 · Cited by 17
“In contrast, a percentage of 100 % means a good shape fidelity, indicating a good quality layer stacking and that the 3D printing samples presents the same dimensions as the designed model (Schwab et al., 2020).”
Shlomo-Avitan, B., Machour, M., Ahmad, S., Friedler, Y., Levenberg, S., & Silverstein, M. S. (2024) · Polymer · doi:10.1016/j.polymer.2024.127971 · Cited by 15
All-Cellulose Hydrogel-Based Bioinks for the Versatile 3D Bioprinting of Different Cell Lines
Carvalho, J. P. F., Lameirinhas, N. S., Teixeira, M. C., Luís, J. L., Oliveira, H., Oliveira, J. M., Silvestre, A. J. D., Vilela, C., & Freire, C. S. R. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.4c01546 · Cited by 16
Leveraging transfer learning for efficient bioprinting
Bracco, F., Zanderigo, G., Paynabar, K., & Colosimo, B. M. (2025) · Biofabrication · doi:10.1088/1758-5090/ade62f · Cited by 15
Rea, M., Lisa, L. D., Pagnotta, G., Gallo, N., Salvatore, L., D’Amico, F., Campilio, N., Baena, J. M., Marchal, J. A., Cicero, A. F. G., et al. (2025) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5c00034 · Cited by 18
“11 The ideal bioink should exhibit (i) a gel-like state before dispensing (ii) shear-thinning behavior during extrusion and (iii) structural retention postdeposition.”
Santoni, S., Sponchioni, M., Gugliandolo, S. G., Colosimo, B. M., & Moscatelli, D. (2022) · Procedia CIRP · doi:10.1016/j.procir.2022.06.062 · Cited by 14
Vel, R., Bhatt, A., Priyanka, A., Gauthaman, A., Anilkumar, V., Safeena, A. S., & Ranjith, S. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.104335 · Cited by 16
Revalorization of sheep-wool keratin for the preparation of fully biobased printable inks
Ugarte, L., Fernández–d’Arlas, B., Larraza, I., Berra, G., Gabilondo, N., & Eceiza, A. (2023) · Journal of Polymers and the Environment · doi:10.1007/s10924-023-02881-3 · Cited by 14
Advances in 3D Bioprinting of Biomimetic and Engineered Meniscal Grafts
Lv, H., Deng, G., Lai, J., Yu, Y., Chen, F., & Yao, J. (2023) · Macromolecular Bioscience · doi:10.1002/mabi.202300199 · Cited by 14
Gomes, J. M., Marques, C. F., Rodrigues, L. C., Silva, T. H., Silva, S. S., & Reis, R. L. (2023) · Acta Biomaterialia · doi:10.1016/j.actbio.2023.11.014 · Cited by 16
Seok, J. M., Ahn, M., Kim, D., Lee, J., Lee, D., Choi, M.-J., Yeo, S. J., Lee, J. H., Lee, K., Kim, B. S., et al. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.130194 · Cited by 15
3D Printing of Double Network Granular Elastomers with Locally Varying Mechanical Properties
Baur, E., Tiberghien, B., & Amstad, E. (2024) · Advanced Materials · doi:10.1002/adma.202313189 · Cited by 19
Metadata
- Authors
- Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J.
- Affiliations
- AO Foundation (CH)
- Utrecht University (NL)
- Corresponding author
- Malda, Jos
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-08-28
- Volume
- 120
- Issue
- 19
- Pages
- 10850-10877
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- PMC
- PMC7564085
- OpenAlex
- W3082213210
- Cited by
- 1,359
- References
- 287
- Citations by year
- 2026: 305 · 2025: 283 · 2024: 280 · 2023: 202 · 2022: 176 · 2021: 107 · 2020: 6
- FWCI
- 10.29
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Chemical Reviews (publishedVersion, cc-by-nc-nd)
- PubMed Central (publishedVersion)
- PubMed (publishedVersion)
- University of Twente Research Information (publishedVersion, cc-by-nc-nd)
- HAL (submittedVersion)
- Utrecht University Repository (Utrecht University) (submittedVersion, other-oa)
- University of Twente Research Information (submittedVersion, cc-by-nc-nd)
- Funders
- AO Foundation (3D OC)
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek (024.003.013)
- ReumaNederland (LLP12, LLP22)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Keywords
- bioinks, 3D bioprinting, printability, shape fidelity, hydrogels, extrusion-based bioprinting, rheology, physicochemical parameters, prediction model
- MeSH terms
- Humans, Ink, Tissue Engineering, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.