Printability and Shape Fidelity of Bioinks in 3D Bioprinting
Open accessThe DOI matches its Crossref record; 285 of the 287 references it cites were found in a registry or an index.
Abstract
Three-dimensional bioprinting uses additive manufacturing techniques for the automated fabrication of hierarchically organized living constructs. The building blocks are often hydrogel-based bioinks, which need to be printed into structures with high shape fidelity to the intended computer-aided design. For optimal cell performance, relatively soft and printable inks are preferred, although these undergo significant deformation during the printing process, which may impair shape fidelity. While the concept of good or poor printability seems rather intuitive, its quantitative definition lacks consensus and depends on multiple rheological and chemical parameters of the ink. This review discusses qualitative and quantitative methodologies to evaluate printability of bioinks for extrusion- and lithography-based bioprinting. The physicochemical parameters influencing shape fidelity are discussed, together with their importance in establishing new models, predictive tools and printing methods that are deemed instrumental for the design of next-generation bioinks, and for reproducible comparison of their structural performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures














Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [30]
The cited source says what the claim attributes to it.
In the citing paper
“However, the successful fabrication of stable 3D constructs relies on hydrogels with optimized rheological behavior, structural stability, and physicochemical properties that ensure printability and shape fidelity [7,8,9].”
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Self-citationHinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Fibrinogen and fibrin structure and functions
MOSESSON, M. W. (2005) · Journal of Thrombosis and Haemostasis · doi:10.1111/j.1538-7836.2005.01365.x · Cited by 1,695
Bioinks for 3D bioprinting: an overview
Gungor-Ozkerim, P. S., Inci, I., Zhang, Y. S., Khademhosseini, A., & Dokmeci, M. R. (2018) · Biomaterials Science · doi:10.1039/c7bm00765e · Cited by 1,428
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Research works printed but not linked: 5
- (126) Chimene, D.; Kaunas, R.; Gaharwar, A. K. Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies. Adv. Mater. 2020 , 32 , 1902026. - · DOI · Paper page
- (129) Mezger, T. G. The Rheology Handbook , 3rd revised ed.; Vincentz Network, 2011. -
- (156) Petta, D.; Grijpma, D. W.; Alini, M.; Eglin, D.; D ' Este, M. Three-Dimensional Printing of a Tyramine Hyaluronan Derivative with Double Gelation Mechanism for Independent Tuning of Shear Thinning and Postprinting Curing. ACS Biomater. Sci. Eng. 2018 , 4 , 3088 -3098. - · DOI
- (161) Kiyotake, E. A.; Douglas, A. W.; Thomas, E. E.; Nimmo, S. L.; Detamore, M. S. Development and Quantitative Characterization of the Precursor Rheology of Hyaluronic Acid Hydrogels for Bioprinting. Acta Biomater. 2019 , 95 , 176. - · DOI · Paper page
- (245) ASTM52900-15, I. ; ASTM International: West Conshohocken, PA, 2015. -
Cited by
Items 701–800 of 1,001
Picado-Tejero, D., Mendoza-Cerezo, L., Rodríguez-Rego, J. M., Macías-García, A., & Marcos-Romero, A. C. (2026) · ACS Omega · doi:10.1021/acsomega.5c09668 · Cited by 10
Controlling properties of ceramic formulations for porcelain robocasting
Pires, L. S. O., Luís, J. L., Fernandes, M. H. V., & Oliveira, J. M. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.09.366 · Cited by 10
Characterization of Peptide-Based Nanomaterials
Edwards‐Gayle, C. J. C., & Wychowaniec, J. K. (2023) · Springer eBooks · doi:10.1007/978-3-031-29360-3_8 · Cited by 12
Chen, P.-H., Chen, I.-H., Kao, W.-H., Wu, S.-Y., & Tsai, W. (2024) · Biomaterials Science · doi:10.1039/d4bm00826j · Cited by 10
Hen, N., Josef, E., Davidovich‐Pinhas, M., Levenberg, S., & Bianco‐Peled, H. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c01136 · Cited by 10
Jafari, A., Bhatt, K., Niknezhad, S. V., Ajji, A., Griffith, M., Andelfinger, G., Bencherif, S. A., & Savoji, H. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.123140 · Cited by 11
Kennedy, S. M., Sekar, M., Vasanthanathan, A., & Amudhan, K. (2025) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2025.2483763 · Cited by 22
“[99,100] Conventional implants frequently encounter constraints in mechanical performance owing to their static characteristics and inability to adapt to the body’s dynamic conditions.”
Applying In Situ Ionic Crosslinking in Bioprinting Using Algae Cells
Rahman, T. T., Wood, N., Rahman, A. M., Pei, Z., & Qin, H. (2023) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4064221 · Cited by 10
Ouiyangkul, P., Hirun, N., Suknuntha, K., & Tantishaiyakul, V. (2023) · Polymers for Advanced Technologies · doi:10.1002/pat.6206 · Cited by 11
Surface slicing and toolpath planning for in-situ bioprinting of skin implants
Chaudhry, M. S., & Czekanski, A. (2024) · Biofabrication · doi:10.1088/1758-5090/ad30c4 · Cited by 9
“In order to reconstruct the surface of a wound, an alternative to expensive laser scanners is a simple design for a touch probe based on a light and spring system, which is presented [34].”
BackgroundBorgia, C., Izquierdo, D. R., Gagliardi, F., Bruno, E., Gabriele, D., & Catapano, G. (2024) · Procedia CIRP · doi:10.1016/j.procir.2024.08.053 · Cited by 9
Liu, G., Wei, X., Li, J., Zhai, Y., Zhang, J., Jin, M., Guan, T., & Zhao, D. (2024) · Frontiers in Materials · doi:10.3389/fmats.2024.1501505 · Cited by 9
3D Printing of Silicone Organogel Elastomers for Structured Soft Biomaterials
Li, Y., Nieva‐Esteve, G., Borrós, S., Texidó, R., & Pena‐Francesch, A. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c01441 · Cited by 9
Integrated biomimetic bioprinting of perichondrium with cartilage for auricle reconstruction
Jia, L., Liu, S., Gu, L., Liu, X., Sun, K., Chu, F., Zeng, J., Liu, W., Jiang, H., & Liu, X. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.02.011 · Cited by 9
“After precise fitting and adequate alignment, the morphological similarity of the two models was analyzed using a three-dimensional deviation comparison and displayed as a deviation chromatogram, as previously reported [34,35].”
Biodegradable 3D-Printed Conjunctival Inserts for the Treatment of Dry Eyes
Garg, P., Shokrollahi, P., Phan, C., & Jones, L. (2025) · Polymers · doi:10.3390/polym17050623 · Cited by 9
“Interestingly, SLA-based 3D printing makes it possible to use different photopolymerizable materials loaded with therapeutics of interest [27].”
Xu, X., Zheng, B., Guo, Q., & Chen, L. (2025) · Food Chemistry · doi:10.1016/j.foodchem.2025.144170 · Cited by 9
An experimental workflow for bioprinting optimization: Application to a custom-made biomaterial ink
Compaired, P. M., García‐Gareta, E., & Pérez, M. Á. (2025) · International Journal of Bioprinting · doi:10.36922/ijb025120094 · Cited by 10
Wychowaniec, J. K., Bektas, E. I., Mürner, M., Sapudom, J., Šrejber, M., Airoldi, M., Schmidt, R., Vernengo, J., Edwards‐Gayle, C. J. C., Tipay, P. S., et al. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c19900 · Cited by 11
“54,55 Therefore, we have measured viscosity curves and rotational flow recovery for all SAP hydrogels (hence named SAP inks in this section) at 20 mM concentration.”
InfluentialSelf-citationLimon, S., Sarah, R., & Habib, A. (2025) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4068429 · Cited by 10
Recent Advances in Handheld and Robotic Bioprinting Approach for Tissue Engineering
Kamaraj, M., Moghimi, N., Joshi, A., Rezayof, O., Barer, A., Cao, S., Orkin, R., Alambeigi, F., & John, J. V. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202500206 · Cited by 10
Fu, C., Liu, G., Fan, Y., Xiao, L., Li, W., Tian, X., & Xiao, J. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101908 · Cited by 18
“These deficiencies hinder their ability to replicate the mechanical properties and biological functions of the native ECM, which are essential for the bioprinting of functional human organs or tissues in vitro [14].”
Pascolo, G., Bekchanov, B., Soliman, M. A. N., Spessot, E., Ali, H. M., Qutachi, O., Abdi, M., Tirella, A., & Elsawy, M. A. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.4c01712 · Cited by 10
Advances in 3D bioprinting of functional biomaterials for neural tissue engineering
Li, S., Xianyu, M., Zhong, Z., & Li, C. (2025) · Tissue and Cell · doi:10.1016/j.tice.2025.103024 · Cited by 12
Hájovská, P., Kroneková, Z., Cseriová, Z., Ház, A., Jančovičová, V., Danišovič, Ľ., Žiaran, S., Heydari, A., & Lacík, I. (2025) · ACS Omega · doi:10.1021/acsomega.5c05476 · Cited by 9
Recent Advances in Biopolymer Modifications for the Generation of 3D Printable Hydrogels
Chu, Y., Zhu, P., & Chen, L. (2025) · Journal of Agricultural and Food Chemistry · doi:10.1021/acs.jafc.5c09488 · Cited by 11
3D bioprinting meets nanotherapeutics: a vehicle for sustained extracellular vesicle delivery
Quinteira, R., Gimondi, S., Melica, M. E., Caballero, D., Castanheira, A., Espiña, B., Lasagni, L., Romagnani, P., Reis, R. L., & Neves, N. M. (2025) · Biomaterials · doi:10.1016/j.biomaterials.2025.123851 · Cited by 9
Cheng, Y., Yang, Z., Guo, R., Zhu, M., Xia, Y., Yu, L., Li, Z., Wang, C., & Huan, S. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2025.124692 · Cited by 9
Liu, Y., Xia, Y., Dai, Y., Sun, M., Xia, X., & Dong, M. (2025) · Food Chemistry · doi:10.1016/j.foodchem.2025.147611 · Cited by 9
Bioink Formulations for 3D Printing of Tissue Scaffolds: A Review of Materials and Printability
Osazee, F. O., Ohifuemen, A. O., Omoruyi, J. I., Ifijen, I. H., & Otabor, G. O. (2024) · The minerals, metals & materials series · doi:10.1007/978-3-031-50349-8_41 · Cited by 10
Bomediano, M. P., da Silva, L. C. E., Mota‐Santiago, P., de Oliveira, M. G., & Plivelic, T. S. (2024) · Frontiers in Soft Matter · doi:10.3389/frsfm.2024.1354122 · Cited by 9
Ino, K., Wachi, M., Utagawa, Y., Konno, A., Takinoue, M., Abe, H., & Shiku, H. (2024) · Analytica Chimica Acta · doi:10.1016/j.aca.2024.342539 · Cited by 9
Wong, L. Y., Ganguly, S., & Tang, X. S. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.104177 · Cited by 9
Gai, K., Yang, M., Chen, W., Hu, C., Luo, X., Smith, A. G., Xu, C., Zhang, H., Li, X., Shi, W., et al. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202401419 · Cited by 10
A 3D bioprinted adhesive tissue engineering scaffold to repair ischemic heart injury
Chen, S., Tan, L., Serpooshan, V., & Chen, H. (2024) · Biomaterials Science · doi:10.1039/d4bm00988f · Cited by 10
Goyal, R., Mahapatra, S. N., Yadav, R., Mitra, S., Samanta, A., Kumar, A., & Lochab, B. (2025) · Bioprinting · doi:10.1016/j.bprint.2025.e00392 · Cited by 9
3D Printable Dynamic Hydrogel: As Simple as it Gets!
Díaz, A., Herrada‐Manchón, H., Nunes, J. D. S., López, A., Díaz, N., Grande, H., Loinaz, I., Fernández, M. A., & Dupin, D. (2022) · Macromolecular Rapid Communications · doi:10.1002/marc.202200449 · Cited by 9
In, J., Kwak, M., & Min, S. C. (2023) · Food Science and Biotechnology · doi:10.1007/s10068-023-01320-2 · Cited by 9
“Fidelity can be described in terms of storage modulus (G ′ ), tan δ , and gel strength (Kokol et al., 2021; Schwab et al., 2020) where tan δ is the viscous property-elastic property ratio (loss modulus (G ″ )/G ′ ) (Eidam et al., 1995).”
Improving the mechanical properties of 3D printed GelMA composite hydrogels by tannic acid
Zhang, X., Xiong, Y., Wu, W., Jiang, X., Dong, Y., Yang, S., & Gou, M. (2023) · MedComm – Biomaterials and Applications · doi:10.1002/mba2.51 · Cited by 9
Leveraging printability and biocompatibility in materials for printing implantable vessel scaffolds
Chen, T., Jiang, H., Zhang, R., He, F., Han, N., Wang, Z., & Jia, J. (2024) · Materials Today Bio · doi:10.1016/j.mtbio.2024.101366 · Cited by 9
Challenges and perspectives in using finite element modeling to advance 3D bioprinting
Soufivand, A. A., Lee, S. J., Jüngst, T., & Budday, S. (2025) · Progress in Biomedical Engineering · doi:10.1088/2516-1091/addb19 · Cited by 12
“One of the most critical factors in the 3D bioprinting process is the printability of the bioink used [12, 50].”
Bom, S., Cavaco, A. M. D. N., Martins, A. M., Ribeiro, H. M., & Marto, J. M. (2025) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2025.125760 · Cited by 9
Bioprinting of GelMA-Based Hydrogels to Aid in Creation of Biomimetic 3D Models for Glioblastoma
Schroyer, K. A. R., Schmitz, K. M., Raheja, G., Su, B., Lathia, J. D., & Ning, L. (2025) · Micromachines · doi:10.3390/mi16060654 · Cited by 10
“However, maintaining high printing fidelity, particularly with soft biomaterials like hydrogels, poses a considerable challenge [83].”
Raggio, J. I. C., Pardo, M., Núñez, P., Millán, C., Siqueira, G. D. F., Palza, H., Vivanco, J. F., & Aiyangar, A. K. (2025) · Polymers · doi:10.3390/polym17111554 · Cited by 10
“Shape retention and, consequently, print fidelity are better for inks with higher yield points [34].”
Oh, D., Kim, D., & Nam, S. Y. (2025) · Bioprinting · doi:10.1016/j.bprint.2025.e00427 · Cited by 8
Marin-Tapia, H. A., Romero-Salazar, L., Mayorga‐Rojas, M., & Arteaga‐Arcos, J. C. (2025) · Macromolecular Bioscience · doi:10.1002/mabi.202500276 · Cited by 8
“Only bioinks that met these criteria were deemed suitable for further printability assessments [4, 8].”
InfluentialDedeloudi, A., Bertelli, P. M., Martinez-Marcos, L., Quinten, T., Lengyel, I., Andersen, S. K., & Lamprou, D. A. (2025) · Journal of Functional Biomaterials · doi:10.3390/jfb16100358 · Cited by 9
“The combination of controlled pneumatic pressure and speed contributed on the homogeneous dispersion of ceramic particles within the polymeric matrix during printing, resulting in a stable and well-defined 3D structure [33].”
Wen, H., Tang, S., Xiang, X., Zheng, B., & Zheng, B. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2025.124486 · Cited by 12
Artificial Intelligence in Biomedical 3D Printing: Mapping the Evidence
Tănase, M., Veres, C., & Szabo, D. A. (2025) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp9120407 · Cited by 9
“The most cited members in this cluster are Yu et al. (2020), published in International Journal of Bioprinting [32], Gu et al. (2020) in Asian Journal of Pharmaceutical Sciences [33], and Schwab et al. (2020) in Chemical Reviews [34], each receiving seven citations within this network.”
Ribbon-shaped microgels as bioinks for 3D bioprinting of anisotropic tissue structures
Lee, H. P., Tai, M., Jones, S., Tong, X., Kim, S. S., Jansman, M. M. T., Tam, T., Du, J., Skylar‐Scott, M. A., & Yang, F. (2026) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.12.040 · Cited by 8
“To visualize the printability of microgel-based bioinks, several widely-used tests, including printing grid patterns to assess filament uniformity, filament drop tests, and filament collapse tests, can be applied as indicators of bioink shape fidelity and self-supporting capability [46,52,61].”
da Silva, V. A., Yu, B., & Willerth, S. M. (2026) · Biofabrication · doi:10.1088/1758-5090/ae46e2 · Cited by 10
Chirume, W. M., Guo, C., Zheng, D., Ma, F., Fan, C., Li, L., Wang, L., Zhou, C., & Kong, Q. (2026) · RSC Advances · doi:10.1039/d5ra09513a · Cited by 8
Wu, D., Zhu, D., Zhou, X., Li, G., Zhang, X., Ma, L., Liang, H., Tong, B., Lei, J., Wang, H., et al. (2026) · ACS Nano · doi:10.1021/acsnano.5c14391 · Cited by 8
“49 For the ink used in 3D printing, we added 4% w/t PEGDA as a plasticizer and 1% w/t carboxymethyl cellulose sodium (CMCNa) as a water retention agent, based on the HG and SilMA hydrogels, to ensure the subsequent 3D printing (Figure 3a).”
Engineered living bioassemblies for biomedical and functional material applications
Guimarães, C. F., Soto, F., Wang, J., Akin, D., Reis, R. L., & Demirci, U. (2022) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2022.102756 · Cited by 8
Lepak-Kuc, S., Nowicka, T., Wasilewska, K., Janczak, D., Walter, P. A., & Jakubowska, M. (2023) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-023-01223-2 · Cited by 9
“The print should have also the correct dimensions specified in the print file [48, 49].”
Braun, P. H. D. R., Kuchenbuch, A., Toselli, B., Rezwan, K., Harnisch, F., & Wilhelm, M. (2024) · Materials for Renewable and Sustainable Energy · doi:10.1007/s40243-023-00253-4 · Cited by 8
“A Pr i equal to 1 indicates a perfectly squared grid, whereas values higher or lower than 1 indicate irregular or circular holes, respectively [43].”
Aloe vera‐based biomaterial ink for 3D bioprinting of wound dressing constructs
Ceballos‐Santa, M. C., Sierra, A., Martinez-Zalbidea, I., Lazarus, E., Marin‐Montealegre, V., Ramesh, S., Iglesias, P., Wuertz‐Kozak, K., & Rivero, I. V. (2024) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.35379 · Cited by 9
Singh, S., Chu, W. Y., Memar, R. O., Carlo, A. D., Veres, T., & Günther, A. (2024) · Reaction Chemistry & Engineering · doi:10.1039/d3re00595j · Cited by 8
Single-Component Cellulose Acetate Sulfate Hydrogels for Direct Ink Writing 3D Printing
Park, S., Sharmin, T., Cho, S.-M., Kelley, S. S., Shirwaiker, R. A., & Park, S. (2024) · Biomacromolecules · doi:10.1021/acs.biomac.4c00578 · Cited by 9
Lourenço, L. R., Borges, R., Carastan, D. J., Mathor, M. B., & Marchi, J. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00359 · Cited by 8
Integrating 3D printing of biomaterials with nitric oxide release
de Almeida, H. V., Bomediano, M. P., Catori, D. M., Silva, E. H. C., & de Oliveira, M. G. (2025) · Biomaterials Science · doi:10.1039/d4bm01304b · Cited by 9
3D Printed Bioelectronic Scaffolds with Soft Tissue‐Like Stiffness
Okafor, S. S., Park, J., Liu, T., Goestenkors, A. P., Alvarez, R. M., Semar, B. A., Yu, J. S., O'Hare, C. P., Montgomery, S. K., Friedman, L. C., et al. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202401528 · Cited by 8
Mechanically robust non-swelling cold water fish gelatin hydrogels for 3D bioprinting
Hammer, T., Yang, K., Spirig, T., Meier-Schiesser, B., Rottmar, M., Maniura‐Weber, K., Rossi, R. M., & Wei, K. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101701 · Cited by 8
“S12-A) [78].”
Dedeloudi, A., Martinez‐Marcos, L., Quinten, T., Andersen, S. K., & Lamprou, D. A. (2025) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2025.126101 · Cited by 8
Transforming Capillary Alginate Gel (Capgel) into New 3D-Printing Biomaterial Inks
Panarello, A. P., Seavey, C., Doshi, M., Dickerson, A. K., Kean, T. J., & Willenberg, B. J. (2022) · Gels · doi:10.3390/gels8060376 · Cited by 8
“This potentially stems from tensile and compression forces at work when the 3D printer undertakes a dramatic change in direction, such as in the weave, and the interplay of those forces with the selfadhesivity/cohesivity and extrusion dynamics of the Capgel ink, which can result in print over-extrusions and/or discont…”
BackgroundBagwan, J. K., & Ahuja, B. B. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.09.090 · Cited by 10
Morita, T., Watanabe, S., & Sasaki, S. (2022) · Precision Engineering · doi:10.1016/j.precisioneng.2022.09.004 · Cited by 8
Biodegradable, Solvent‐Free Photocrosslinkable PLLA Resin Formulations for Additive Manufacturing
Pal, S., & Asha, S. K. (2022) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202200139 · Cited by 8
Topological effect on mechanical properties of self-assembled block copolymer
Siddique, S. K., Sadek, H., Lee, T.-L., Manesi, G.-M., Avgeropoulos, A., Wang, C.-W., Lee, C., Thomas, E. L., & Ho, R. (2023) · Giant · doi:10.1016/j.giant.2023.100205 · Cited by 8
How biofabrication can accelerate cultured meat’s path to market
Heine, S., Ahlfeld, T., Albrecht, F. B., Gelinsky, M., & Kluger, P. J. (2024) · Nature Reviews Materials · doi:10.1038/s41578-024-00650-9 · Cited by 8
Open-source extrusion 3D bioprinters: Trends and recommendations
Crosby, C. O. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00336 · Cited by 9
Arduengo, J., Hascoët, N., Chinesta, F., & Hascoët, J.-Y. (2024) · Journal of Machine Engineering · doi:10.36897/jme/186044 · Cited by 8
“Rheological models have been tested to establish a relation between input pneumatic pressure and output material flowrate [7].”
MethodChoi, H.-I., & Yi, H. (2024) · Journal of Building Engineering · doi:10.1016/j.jobe.2024.109122 · Cited by 8
Hu, J., Wei, J., Liu, J., Li, Y., Li, Y., Luo, X., Li, Y., & Li, J. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c00457 · Cited by 8
Sever, M., Škrinjar, D., Maver, T., Belak, M., Zupanič, F., Anžel, I., & Zidarič, T. (2024) · Biomedicines · doi:10.3390/biomedicines12092028 · Cited by 12
“As shown in Figure 2, all hydrogels demonstrate shear-thinning behavior, indicated by a decrease in the viscosity as the shear rate increases, which helps to maintain the printed shape [39,47].”
BackgroundInfluentialJaworska, K., Senior, J. J., Brüning‐Richardson, A., & Smith, A. M. (2024) · Tissue and Cell · doi:10.1016/j.tice.2024.102615 · Cited by 9
Poerio, A., Mashanov, V. S., Lai, D., Kim, M. W. S., Ju, Y. M., Kim, J. H., Lee, S. J., Cleymand, F., Mano, J. F., Atala, A., et al. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00220 · Cited by 8
Bioprinting technologies: an overview
Bonatti, A. F., Fortunato, G. M., Maria, C. D., & Vozzi, G. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-85430-6.00006-6 · Cited by 11
Azhakesan, A., Kern, J., Mishra, A., Selhuber‐Unkel, C., Affolter, A., Gatenholm, P., Rotter, N., & Bieback, K. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202403114 · Cited by 7
Yoon, J., Lee, Y., Kim, M., Park, J. Y., & Jang, J. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202403118 · Cited by 7
Palit, N., Suryavanshi, P., & Banerjee, S. (2025) · Biotechnology and Bioengineering · doi:10.1002/bit.28973 · Cited by 7
“Rheological properties are important factors that affect the printability of hydrogels (Schwab et al. 2020).”
Moreira, A. D. O. E., Neta, L. M. S. A., Pietroluongo, M., Matos, A. P. D. S., Corrêa, B. B., Ortiz, B. H., Guimarães, A. S., Nele, M., Santos, C. M., Fai, A. E. C., et al. (2025) · Pharmaceutics · doi:10.3390/pharmaceutics17050658 · Cited by 7
“This thixotropic behavior ensures that the material flows during extrusion and solidifies quickly after deposition, which is critical for maintaining the printed product’s shape [25,54].”
InfluentialParmentier, L., Vermeersch, E., & Vlierberghe, S. V. (2025) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2025.1506122 · Cited by 8
Utilising design of experiment to design an optimised bioink for 3D bioprinting
Upton, A. M. C., Mylona, A., & Zimbitas, G. (2025) · Journal of Materials Science · doi:10.1007/s10853-025-11076-1 · Cited by 7
“Bioinks must possess several key characteristics to effectively mimic the native extracellular matrix of the target tissue [7], including biocompatibility [ 8], printability [ 9 ], bioactivity [10], and mechanical properties tailored to the specific tissue type and applications [11, 12].”
Sanchez-Rubio, A., Hope, L., Barcelona‐Estaje, E., Jayawarna, V., Williams, J. M., & Manuel, S.-S. (2025) · Biomaterials Advances · doi:10.1016/j.bioadv.2025.214408 · Cited by 8
Kafili, G., Niknejad, H., Tamjid, E., & Simchi, A. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101542 · Cited by 7
Recent Advances in Bioink Research for Biomedical Applications
Chandarana, C. V., Sane, D., Mishra, S., chaubey, A., Gohil, U., & Prajapati, B. G. (2025) · Biomedical Materials & Devices · doi:10.1007/s44174-025-00478-z · Cited by 9
Advanced cell-adaptable hydrogels for bioprinting
Li, L., Wu, W., Zhu, Q., Peng, M., Dong, Y., Liu, H., Zhang, J., & Gou, M. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.07.044 · Cited by 8
“This is because high-viscosity material inks exhibit enhanced resistance to flow under stress, thereby preventing collapse of the printed structure and maintaining both printing accuracy and structural stability [139].”
Construction of a 3D bioprinted skin model for psoriasis research and drug evaluation
Peng, W., Zhao, Y., Ren, B., He, T., Li, D., Zhang, H., Du, K., Wang, B., & Liu, J. (2025) · Biofabrication · doi:10.1088/1758-5090/adfe1d · Cited by 7
“The fidelity ratio was calculated as the average printed filament diameter divided by the nozzle diameter [24–26]: Fidelity Ratio = D printed D nozzle .”
Breast cancer organoids: Advancements and applications in precision medicine
Leung, D. T. H., Kaur, J., Richardson, G. E., & Jardé, T. (2025) · Critical Reviews in Oncology/Hematology · doi:10.1016/j.critrevonc.2025.104914 · Cited by 10
Ghosh, S., Thakur, S. S., Bajya, M., Srivastava, R. K., & Yadav, A. L. (2025) · Polymer · doi:10.1016/j.polymer.2025.128989 · Cited by 7
Chen, H., Cheng, R., Chung, S. H., Marghoub, A., Zhong, H., Fang, G., Balabani, S., Silvio, L. D., & Huang, J. (2025) · Biomedical Technology · doi:10.1016/j.bmt.2025.100101 · Cited by 7
“While post-printing deformation is traditionally deemed undesirable in 3D printing as it affects shape retention [15], the present work offers a new perspective by revealing its unexpected contributions to enhancing interfacial bonding and mechanical properties.”
Prasetyaningrum, P. W., Mubarok, W., Kotani, T., & Sakai, S. (2025) · Bioprinting · doi:10.1016/j.bprint.2025.e00439 · Cited by 7
Bioinspired thermoreversible bioink orchestrates focal adhesion-dependent osteogenesis
Gupta, T., Rath, P., Pakharenko, V., Vyas, A., Hofsass, L., Jalali, A., Nandi, S. K., Sone, E. D., Ghosh, S. B., Bandyopadhyay‐Ghosh, S., et al. (2025) · Trends in biotechnology · doi:10.1016/j.tibtech.2025.09.007 · Cited by 7
Sarker, N. K., & Kaparaju, P. (2025) · ChemEngineering · doi:10.3390/chemengineering9050111 · Cited by 9
Tansell, A. V., Mahmoodi, N., Crolla, J. P., Dyson, R., Luo, J., & Thomas-Seale, L. E. J. (2025) · Royal Society Open Science · doi:10.1098/rsos.250504 · Cited by 8
Xu, Y., Dai, H., Ye, Q., Zhang, W., Wang, N., Xiong, L., & Guo, R. (2026) · Soft Science · doi:10.20517/ss.2025.107 · Cited by 10
Advancing bioink homogeneity in extrusion 3D bioprinting with active in situ magnetic mixing
Afghah, F., Kheiri, S., Ladd, A., Ye, F., McCoy, V., Bai, J., Kohli, S., Zanderigo, G., de Lima, G., & Raman, R. (2026) · Device · doi:10.1016/j.device.2025.101044 · Cited by 7
A review on direct ink writing 3D printing: Materials, properties, and future advancements
Kumar, P., Ray, R., Kumar, S., Powar, S., & Doddamani, M. R. (2026) · Progress in Engineering Science · doi:10.1016/j.pes.2026.100241 · Cited by 7
Yang, S., Kim, H., Rezayof, O., Bonyun, J., John, J. V., Dokmeci, M. R., Khademhosseini, A., & Alambeigi, F. (2025) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2024.3382200 · Cited by 7
“Particularly, to find the optimal combination of the bioprinting parameters, we first performed experiments using the following values suggested in the literature (e.g., [19], [32], [33]): v r ∈ { 1 , 2 , 3 , 4 , 5 , 6 } mm / s , r e ∈ 2 4 3 .”
Maier, A. S., Lackner, F., Fink, J., Steindorfer, T., Hofmann, E., Kleinschek, K. S., & Rieger, B. (2025) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c03517 · Cited by 7
Metadata
- Authors
- Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J.
- Affiliations
- AO Foundation (CH)
- Utrecht University (NL)
- Corresponding author
- Malda, Jos
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-08-28
- Volume
- 120
- Issue
- 19
- Pages
- 10850-10877
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- PMC
- PMC7564085
- OpenAlex
- W3082213210
- Cited by
- 1,359
- References
- 287
- Citations by year
- 2026: 305 · 2025: 283 · 2024: 280 · 2023: 202 · 2022: 176 · 2021: 107 · 2020: 6
- FWCI
- 10.29
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Chemical Reviews (publishedVersion, cc-by-nc-nd)
- PubMed Central (publishedVersion)
- PubMed (publishedVersion)
- University of Twente Research Information (publishedVersion, cc-by-nc-nd)
- HAL (submittedVersion)
- Utrecht University Repository (Utrecht University) (submittedVersion, other-oa)
- University of Twente Research Information (submittedVersion, cc-by-nc-nd)
- Funders
- AO Foundation (3D OC)
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek (024.003.013)
- ReumaNederland (LLP12, LLP22)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Keywords
- bioinks, 3D bioprinting, printability, shape fidelity, hydrogels, extrusion-based bioprinting, rheology, physicochemical parameters, prediction model
- MeSH terms
- Humans, Ink, Tissue Engineering, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.