Printability and Shape Fidelity of Bioinks in 3D Bioprinting
Open accessThe DOI matches its Crossref record; 285 of the 287 references it cites were found in a registry or an index.
Abstract
Three-dimensional bioprinting uses additive manufacturing techniques for the automated fabrication of hierarchically organized living constructs. The building blocks are often hydrogel-based bioinks, which need to be printed into structures with high shape fidelity to the intended computer-aided design. For optimal cell performance, relatively soft and printable inks are preferred, although these undergo significant deformation during the printing process, which may impair shape fidelity. While the concept of good or poor printability seems rather intuitive, its quantitative definition lacks consensus and depends on multiple rheological and chemical parameters of the ink. This review discusses qualitative and quantitative methodologies to evaluate printability of bioinks for extrusion- and lithography-based bioprinting. The physicochemical parameters influencing shape fidelity are discussed, together with their importance in establishing new models, predictive tools and printing methods that are deemed instrumental for the design of next-generation bioinks, and for reproducible comparison of their structural performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures














Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [30]
The cited source says what the claim attributes to it.
In the citing paper
“However, the successful fabrication of stable 3D constructs relies on hydrogels with optimized rheological behavior, structural stability, and physicochemical properties that ensure printability and shape fidelity [7,8,9].”
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Self-citationHinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Fibrinogen and fibrin structure and functions
MOSESSON, M. W. (2005) · Journal of Thrombosis and Haemostasis · doi:10.1111/j.1538-7836.2005.01365.x · Cited by 1,695
Bioinks for 3D bioprinting: an overview
Gungor-Ozkerim, P. S., Inci, I., Zhang, Y. S., Khademhosseini, A., & Dokmeci, M. R. (2018) · Biomaterials Science · doi:10.1039/c7bm00765e · Cited by 1,428
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Research works printed but not linked: 5
- (126) Chimene, D.; Kaunas, R.; Gaharwar, A. K. Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies. Adv. Mater. 2020 , 32 , 1902026. - · DOI · Paper page
- (129) Mezger, T. G. The Rheology Handbook , 3rd revised ed.; Vincentz Network, 2011. -
- (156) Petta, D.; Grijpma, D. W.; Alini, M.; Eglin, D.; D ' Este, M. Three-Dimensional Printing of a Tyramine Hyaluronan Derivative with Double Gelation Mechanism for Independent Tuning of Shear Thinning and Postprinting Curing. ACS Biomater. Sci. Eng. 2018 , 4 , 3088 -3098. - · DOI
- (161) Kiyotake, E. A.; Douglas, A. W.; Thomas, E. E.; Nimmo, S. L.; Detamore, M. S. Development and Quantitative Characterization of the Precursor Rheology of Hyaluronic Acid Hydrogels for Bioprinting. Acta Biomater. 2019 , 95 , 176. - · DOI · Paper page
- (245) ASTM52900-15, I. ; ASTM International: West Conshohocken, PA, 2015. -
Cited by
Items 801–900 of 1,001
Liu, S., Kilian, D., Bernhardt, A., Wirsig, K., von Witzleben, M., Duin, S., Lode, A., Hu, Q., & Gelinsky, M. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202404470 · Cited by 8
Guida, L., Romani, A., Negri, D., Cavallaro, M., & Levi, M. (2025) · Sustainable materials and technologies · doi:10.1016/j.susmat.2025.e01335 · Cited by 7
Biomechanical and mechanobiological design for bioprinting functional microvasculature
Zhang, D., Liu, J., Liu, X., & Fan, Y. (2025) · Applied Physics Reviews · doi:10.1063/5.0227692 · Cited by 7
Trifan, A., Liciu, E., Busuioc, C., Stancu, I., Banciu, A., Nicolae, C., Dragomir, M., Cristea, D., Sabău, R.-E., Nițulescu, D.-A., et al. (2025) · Journal of Functional Biomaterials · doi:10.3390/jfb16060227 · Cited by 7
A continuum robotic bioprinter for in situ vocal fold repair
Groen, S. A. T., Nejati, S., AlHumaid, S., Huynh, L. A., Kost, K. M., Sedal, A., & Mongeau, L. (2025) · Device · doi:10.1016/j.device.2025.100973 · Cited by 7
Bioink Printability Methodologies for Cell-Based Extrusion Bioprinting
Copus, J. S., Lee, S. J., & Atala, A. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-824552-1.00013-x · Cited by 8
Silylated biomolecules: Versatile components for bioinks
Montheil, T., Simon, M., Noël, D., Mehdi, A., Subra, G., & Echalier, C. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.888437 · Cited by 7
The 3D-McMap Guidelines: Three-Dimensional Multicomposite Microsphere Adaptive Printing
Klar, R. M., Cox, J. C., Raja, N., & Lohfeld, S. (2024) · Biomimetics · doi:10.3390/biomimetics9020094 · Cited by 7
3D printing of gellan‐dextran methacrylate IPNs in glycerol and their bioadhesion by RGD derivatives
Paoletti, L., Baschieri, F., Migliorini, C., Meo, C. D., Monasson, O., Peroni, E., & Matricardi, P. (2024) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37698 · Cited by 7
Torchio, A., Boffito, M., Laurano, R., Cassino, C., Lavella, M., & Ciardelli, G. (2024) · Journal of Materials Chemistry B · doi:10.1039/d4tb00092g · Cited by 7
Bio-based additive manufacturing: an overview
Skrodzka, M., Cieślak, A., Łabowska, M. B., Detyna, J. D., & Michalak, I. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-18462-8.00011-8 · Cited by 10
Tan, J., Zhu, G., Tan, L., Wu, Q., Liu, Z., Yang, M., & Meng, X. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.104469 · Cited by 7
Navaneethan, B., Amoli, M. S., Yang, Y.-C., Rezapourdamanab, S., Tseng, C.-Y., Singh, Y., Guo, C., Serpooshan, V., & Chou, C. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c07425 · Cited by 7
Le, H., Hassan, K., Alsenaide, M., Purasinhala, K., Tran, A. T. T., Ramezanpour, M., Al-Sarawi, S. F., Tùng, T. T., Vreugde, S., & Lošić, D. (2025) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5c00920 · Cited by 6
Predictive Approaches for 3D ‐Printing: Methods and Approaches for Polymeric Materials
Cooley, I., Wang, W. J., Kozyrev, V. A., Wildman, R. D., Johnston, B. F., & Croft, A. K. (2025) · Wiley Interdisciplinary Reviews Computational Molecular Science · doi:10.1002/wcms.70048 · Cited by 9
“Structural and tensile properties of printed parts are also important [39], as is the accuracy of the reproduction of desired dimensions (print fidelity) [40].”
Li, L., Hernandez, A., Grevsmuehl, R., Kou, Y.-T., & Song, S. (2025) · Materials Advances · doi:10.1039/d5ma00932d · Cited by 6
“18 Sacri-ficial layers are frequently employed in 3D printing of hollow structures, as they reinforce the materials to prevent shifting or sliding during post-curing processing.”
Patel, D. K., Cha, J., Won, S.-Y., & Han, S. S. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.149077 · Cited by 6
Step‐Ladder Bioprinting to Align Collagen Fibers for Anisotropic Tissue Fabrication
Namlı, İ., Singh, Y. P., Gupta, D., Rizvi, S. H. A., Yilmaz, Y. O., Robazzi, J. V. S., Sarıkaya, M. D., Baykara, M., & Ozbolat, I. T. (2026) · Small · doi:10.1002/smll.202510498 · Cited by 6
“In contrast, the 16 mg/mL gel consistently maintained values within the optimal range [28], demonstrating its structural reliability during extrusion.”
Sunder, K., Janarthanan, G., Vinod, N., AlYammahi, J., Patel, D., & Vijayavenkataraman, S. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.150376 · Cited by 8
Kumar, P., Kumar, A., Saini, S., & Kayastha, A. M. (2026) · Advanced Healthcare Materials · doi:10.1002/adhm.202505346 · Cited by 6
“This level of architectural control is a significant leap beyond the capabilities of conventional fabrication methods and is critical for engineering complex, functional tissues [9].”
InfluentialGhofrani-Beiragh, S., Moghaddam, M. M., Jooybar, E., Imani, R., & Tayebi, L. (2026) · Applied Materials Today · doi:10.1016/j.apmt.2026.103103 · Cited by 7
Recent advances in 3D printing biomimetic gradient scaffolds for tendon-bone interface repair
Zhang, J., Chen, H., Li, X., Zhang, A., Liu, Y., Wang, J., Zhao, X., & Han, Q. (2026) · Materials Today Advances · doi:10.1016/j.mtadv.2026.100699 · Cited by 10
Domingues, M. F., Carreira, M. C., Santos, M., Pacheco, D. P., Ferreira, F. C., Sanjuan‐Alberte, P., & Silva, J. C. (2026) · Advanced Healthcare Materials · doi:10.1002/adhm.202503633 · Cited by 7
“Printability was assessed using the printability factor (Pr) of the pores of printed square meshes, as suggested by Schwab et al. [62].”
Spagnuolo, F. D., Kronemberger, G. S., & Kelly, D. A. (2026) · Advanced Science · doi:10.1002/advs.202509313 · Cited by 9
“However, the slow gelation and relatively poor printability of collagen-based bioinks challenge this approach [ 77–79 ].”
Park, I.-S., Cho, Y., Lee, Y. J., Gutierrez, D., Zuckermann, R. N., Seong, H., & Kim, J. H. (2026) · ACS Nano · doi:10.1021/acsnano.5c16998 · Cited by 6
In Situ 3D Bioprinting: Impact of Cross‐Linking on the Adhesive Properties of Hydrogels
Fernandez, O. R., Asim, M. H., Arshad, S., Kali, G., & Bernkop‐Schnürch, A. (2026) · Advanced Functional Materials · doi:10.1002/adfm.202530372 · Cited by 6
“These hydrogels demonstrated high biocompatibility and mechanical strength (up to 44.6 kPa), supporting fibroblast and chondrocyte culture in vitro as well as injectable chondrocyte delivery in vivo [99].”
InfluentialAzhar, M., Malviya, R., Balusamy, B., SRIDHAR, S. B., SHAREEF, J., Wadhwa, T., & Sivasankaran, A. (2026) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-026-01780-0 · Cited by 6
“Co-design helps to reduce development cycles and improve scale-up potential for hybrid bioprinting platforms [14, 42, 49, 78].”
InfluentialChelu, M., Moreno, J. M. C., & Popa, M. (2026) · Gels · doi:10.3390/gels12050389 · Cited by 6
Ramos-Díez, S., Larrañaga-Jaurrieta, G., Iturriaga, L., Abarrategi, A., & Camarero‐Espinosa, S. (2023) · Biomaterials Science · doi:10.1039/d3bm00581j · Cited by 6
Rheological characterization and print quality studies of gelatin/collagen I/PEGDA hydrogels
Bartholomew, K., & Mahapatro, A. (2024) · International Journal of Polymeric Materials · doi:10.1080/00914037.2024.2391964 · Cited by 8
“It has been widely stated that print fidelity is directly related to a bioink’s yield stress and viscosity [63] .”
Sahoo, S. D., & Prasad, E. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c01541 · Cited by 6
Carvalho, L. N., Peres, L. C., Alonso‐Goulart, V., dos Santos, B. J., Braga, M. F. A., Campos, F. D. A. R., Palis, G. D. A. P., Quirino, L. S., Guimarães, L. D., Lafetá, S. A., et al. (2024) · Journal of Biomaterials Applications · doi:10.1177/08853282241276799 · Cited by 6
Drug-loaded 3D-printed magnetically guided pills for biomedical applications
Myrovali, E., Chatzitaki, A., Papadopoulos, K., & Fatouros, D. G. (2025) · RSC Pharmaceutics · doi:10.1039/d4pm00313f · Cited by 6
Seiti, M., Mazzoldi, E. L., Pandini, S., Ferraris, E., & Ginestra, P. S. (2025) · Bioprinting · doi:10.1016/j.bprint.2025.e00403 · Cited by 6
Development of multiparametric bioprinting method for generation of 3D printed cell‐laden structures
Lipshutz, S., Kim, Y., Curtis, M., Friedrich, L. M., & Alimperti, S. (2025) · Biotechnology Progress · doi:10.1002/btpr.70016 · Cited by 7
“56 A higher K value represents increased viscosity, while an n value less than 1 indicates a shear-thinning fluid, with lower values reflecting more substantial shear-thinning effects.”
Genetic and bioactive functionalization of bioinks for 3D bioprinting
Kumar, P., Sharma, J., Kumar, R., Najser, J., Frantík, J., Sunnam, N., Sindhu, A., & Praveenkumar, S. (2025) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-025-03180-y · Cited by 10
“This balance is critical to avoid clogging or collapse of printed structures [136, 154].”
Truong, H.-N., Rodriguez, N., Abaci, A., Guner, G., Young, J., Bilgili, E. A., & Güvendiren, M. (2025) · Virtual and Physical Prototyping · doi:10.1080/17452759.2025.2517811 · Cited by 6
“In this study, semi-quantitative assessment methods were used based on the shape fidelity of square pores and the self-supporting ability of disc-shaped solid tablets [68,69].”
Advances and obstacles to unify the concept of “printability” in Ceramics Direct Ink Writing
Maillard, M., Fournier, S., García‐Tuñón, E., & Courtial, E. (2025) · Open Ceramics · doi:10.1016/j.oceram.2025.100808 · Cited by 6
From Digital Design to Edible Art: The Role of Additive Manufacturing in Shaping the Future of Food
Šimon, J., & Gogolák, L. (2025) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp9070217 · Cited by 6
Bracchi, M., Nicotra, F., & Russo, L. (2025) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2025.100928 · Cited by 6
Ismat, M. S., Nawaz, M. H., Aizaz, A., Irfan, M., Elshafie, H., Mubarakali, A., & Rehman, M. A. U. (2025) · Polymer · doi:10.1016/j.polymer.2025.128941 · Cited by 6
Luo, Y., Drexler, J. F., Paasche, G., Dräger, G., Zhang, H., Tang, J., Lenarz, T., & Scheper, V. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.147176 · Cited by 6
Three-dimensional bioprinting of tissues and organs
Pai, R. R., Sekar, J. A., Ajit, S., Velayudhan, S., Kasoju, N., & Anil Kumar, P. R. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-823966-7.00018-9 · Cited by 7
Type‐Independent 3D Writing and Nano‐Patterning of Confined Biopolymers
Yang, U., Kang, B., Yong, M., Yang, D., Choi, S., Je, J. H., & Oh, S. S. (2023) · Advanced Science · doi:10.1002/advs.202207403 · Cited by 8
Three-dimensional bioprinting of articular cartilage using silk fibroin–gelatin bioink
Sanyal, A., Bhattacharyya, B., & Ghosh, S. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-96017-5.00001-7 · Cited by 6
Guagliano, G., Volpini, C., Sardelli, L., Vangosa, F. B., Visai, L., & Petrini, P. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202303349 · Cited by 6
Naik, S. S., T., A. T. A., Choudhury, N. R., Dutta, N. K., & Nair, K. S. (2024) · Biomaterials Advances · doi:10.1016/j.bioadv.2024.213816 · Cited by 6
3D Printing for Personalized Solutions in Cervical Spondylosis
Wu, L., Zhang, Z., Li, R.-J., Xin, D.-Q., & Wang, J.-F. (2024) · Orthopedic Research and Reviews · doi:10.2147/orr.s486438 · Cited by 7
Fibrillar Hydrogel Inducing Cell Mechanotransduction for Tissue Engineering
Egorova, V. V., Lavrenteva, M. P., Makhaeva, L. N., Petrova, E. A., Ushakova, A. A., Bozhokin, M. S., & Krivoshapkina, E. F. (2024) · Biomacromolecules · doi:10.1021/acs.biomac.4c00897 · Cited by 6
Optimization of hydrogel extrusion printing process parameters based on numerical simulation
Wei, Q., Li, M., An, Y., Zhao, X., & Sun, D. (2024) · Physics of Fluids · doi:10.1063/5.0235622 · Cited by 6
Omidvari, E., Samandari, M., Ghanbariamin, D., Lara, E. C. M., Quint, J. P., Saeedinejad, F., Bouizi, Y., Bouguet‐Bonnet, S., Elkhoury, K., Sánchez‐González, L., et al. (2024) · Biofabrication · doi:10.1088/1758-5090/ad9a01 · Cited by 6
“After extrusion, the material is able to regain its original shape for photocrosslinking [88].”
Multi-index-dependent decellularization processes for scalable tissue-specific bioink production
Kim, H. J., Park, I., Choi, Y., Choi, H., Jeong, S. H., Yoon, J., Kim, D., Lee, B. R., & Jang, J. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.161827 · Cited by 9
Lameirinhas, N. S., Teixeira, M. C., Carvalho, J. P. F., Valente, B. F. A., Luís, J. L., Duarte, I. F., Pinto, R. J. B., Oliveira, H., Oliveira, J. M., Silvestre, A. J. D., et al. (2025) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c02148 · Cited by 7
Structured Data Storage for Data-Driven Process Optimisation in Bioprinting
Schmieg, B., Brandt, N., Schnepp, V. J., Radosevic, L., Gretzinger, S., Selzer, M. A., & Hubbuch, J. J. (2022) · Applied Sciences · doi:10.3390/app12157728 · Cited by 6
“Bioink raw material Batch-to-batch variations, ageing, change of composition by purification or sterilisation steps [46–50] Variations in viscosity, rheological behaviour and printing properties [14,20,51,52]; risk of process interruption because of nozzle clogging or increased bioink flow Batch monitoring: analysis p…”
MethodBioprinting: From Technique to Application in Tissue Engineering and Regenerative Medicine
de Souza, T. V., Giorno, L. P., Malmonge, S. M., & Santos, A. R. (2022) · Current Molecular Medicine · doi:10.2174/1566524023666220822152448 · Cited by 6
3D Printers for Food Printing – Advantages and Drawbacks of Market Ready Technical Solutions
Harasym, J. (2022) · Engineering Sciences And Technologies · doi:10.15611/nit.2022.38.03 · Cited by 7
Agarose Fluid Gels Formed by Shear Processing During Gelation for Suspended 3D Bioprinting
Senior, J. J., Moakes, R. J. A., Cooke, M. E., Moxon, S. R., Smith, A. M., & Grover, L. M. (2023) · Journal of Visualized Experiments · doi:10.3791/64458 · Cited by 11
Cianciosi, A., Simon, J., Bartolf‐Kopp, M., Grausgruber, H., Dargaville, T. R., Forget, A., Gröll, J., Jüngst, T., & Beaumont, M. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.121145 · Cited by 8
Ortiz, D., Mokarizadeh, A. H., Segal, M. I., Dang, F., Zafari, M., Tsige, M., & Joy, A. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.3c00684 · Cited by 6
Discovering the Latest Scientific Pathways on Tissue Spheroids: Opportunities to Innovate
Rodríguez-Salvador, M., Pérez-Benítez, B. E., & Padilla-Aguirre, K. M. (2021) · International Journal of Bioprinting · doi:10.18063/ijb.v7i1.331 · Cited by 6
“In addition, it is also possible to create biological connectivity by embedding cells with pore networks to deliver components such as drug or nutrients[4].”
BackgroundA Refined Hot Melt Printing Technique with Real-Time CT Imaging Capability
Muldoon, K., Ahmad, Z., Su, Y.-C., Tseng, F., Chen, X., McLaughlin, J. A., & Chang, M. (2022) · Micromachines · doi:10.3390/mi13101794 · Cited by 6
“Its optimization may require alterations according to the viscosity of the polymer used, where a highly viscous polymer requires higher pressure to extrude it from the printing nozzle [13].”
BackgroundTorza, A., Zgeib, R., Wang, X. F., Zaeri, A., Zhang, F., Cao, K., Chang, R. C., & Weickenmeier, J. (2024) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2024.112938 · Cited by 5
Stola, G. P., Paoletti, C., Nicoletti, L., Paul, G., Cassino, C., Marchese, L., Chiono, V., & Marcello, E. (2024) · International Journal of Bioprinting · doi:10.36922/ijb.4014 · Cited by 8
Panyamao, P., Charumanee, S., Ruangsuriya, J., & Saenjum, C. (2025) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2025.100752 · Cited by 7
Spessot, E., Bai, X., Moranduzzo, D., Zhao, C., Butterworth, S., Maniglio, D., & Tirella, A. (2025) · RSC Pharmaceutics · doi:10.1039/d4pm00334a · Cited by 5
Pohjola, J., Soukka, T., Jokinen, M., & Stolt, M. (2025) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2025.05.002 · Cited by 5
Wong, Z. Q., Yeo, W. H., Tey, J. Y., Ting, C. H., Teoh, H. K., Ng, C. K., Yew, M. C., & Ramesh, S. S. R. (2025) · Ceramics International · doi:10.1016/j.ceramint.2025.05.412 · Cited by 5
Precision Engineering of Bioceramics
Yang, Z., & Wu, C. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202502635 · Cited by 8
Paul, R., Zhao, Y., Adhikary, P. P., Qin, X., Li, Q., Efelis, A., & Liu, Y. (2025) · ACS Sensors · doi:10.1021/acssensors.5c01433 · Cited by 5
Non-planar additive manufacturing with hydrogels: a review of flow control and toolpath strategies
van der Valk, P. C. W. M., & Mirzaali, M. J. (2025) · npj Soft Matter · doi:10.1038/s44431-025-00006-5 · Cited by 7
Aqueous Processing of Stoichiometric and Nonstoichiometric Materials from Complex Coacervates
Hung, S.-H. J., & Schiffman, J. D. (2025) · Accounts of Materials Research · doi:10.1021/accountsmr.5c00173 · Cited by 5
Printability of Bioinks: A Consolidated Definition for Additive Manufacturing
Resende, M. A. A., Rigo, E. C. D. S., & Vercik, A. (2025) · ACS Omega · doi:10.1021/acsomega.5c00727 · Cited by 5
Liu, C., Shi, X., Lin, B., Song, Z., Jiang, F., Liu, C., Liu, C., & Mei, C. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2025.124787 · Cited by 5
AI-powered printability evaluation framework for 3D bioprinting using Hausdorff distance metrics
Zhang, C., Elvitigala, K. C. M. L., & Sakai, S. (2025) · Biofabrication · doi:10.1088/1758-5090/ae288c · Cited by 9
“…consideration in evaluating the printing performance of composite bioinks is shape fidelity (also referred to as printability in this study), which is the ability of a material to replicate the geometric fidelity of the computer-aided design (CAD) model under controlled printing conditions [3, 11].”
Vaibavi, S. R., Lau, K., Huang, C., Kwokdinata, C., Oliveira, P. F., Ju, W., David, L., & Chew, S. Y. (2025) · Journal of Materials Chemistry B · doi:10.1039/d5tb01557j · Cited by 5
Kumar, N., Devi, N., Gusain, R., Wojciak, P., Polat, S., & Seyedin, S. (2026) · Journal of Materials Chemistry A · doi:10.1039/d5ta10485h · Cited by 6
Patel, P. S., Pandey, G., Kumar, A., Misra, S. K., Roy, S., Awasthi, D. A., Wagh, S. S., Srivastava, S., & Kapoor, A. (2026) · Biomedical Materials & Devices · doi:10.1007/s44174-026-00671-8 · Cited by 8
Budharaju, H., K, P. K. S., Rajendran, M., Sivasubramanian, M., Sethuraman, S., & Sundaramurthi, D. (2026) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5c01868 · Cited by 5
Li, X., Long, Q., Jiang, M., Tan, W., Ding, N., Sun, H., Liu, X., Hu, X., Liu, H., Li, X., et al. (2026) · Nature Communications · doi:10.1038/s41467-026-70988-x · Cited by 9
“Preparation of microbial symbiotic networks (MSNs) SA and PEGDA were the main components used in the coaxial bio-printing technology for preparing core – shell hydrogels due to their mechanical properties and biocompatibility 23,24 .”
Pianou, M. E., Mîrț, A. L., Rigano, V., Verné, E., Baino, F., & Boccaccini, A. R. (2026) · Acta Biomaterialia · doi:10.1016/j.actbio.2026.05.010 · Cited by 5
Kallingal, N., Ramakrishnan, R., & Krishnan, K. (2022) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2022.2145867 · Cited by 5
“Developing a bioink with optimum cell growth with a lasting strength and structural fidelity is the major concern of the bioprinting [9,11].”
BackgroundTajvar, S., Hadjizadeh, A., & Samandari, S. S. (2023) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2023.0082 · Cited by 5
“34,39,40 Figure 2d shows the results of the recovery test.”
Phung, L. X., Ta, T. Q., Pham, V., Nguyen, M. T., Do, T., & Nguyen, T. K. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00339 · Cited by 5
Melt-Extrusion Additive Manufacturing for Tissue Engineering: Applications and Limitations
Calore, A. R., Mota, C., Bernaerts, K. V., Harings, J., & Moroni, L. (2024) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2023.0104 · Cited by 5
Nasal cartilage tissue engineering materials based on 3D bioprinting: Seed cells and dECM
Jia, W., Yang, X., Liu, Z., Sun, L., Shen, Z., Li, M., Zhang, H., An, Y., & Sang, S. (2024) · Applied Materials Today · doi:10.1016/j.apmt.2024.102364 · Cited by 7
Recent advancements and challenges in 3D bioprinting for cancer applications
Behera, S. A., Nanda, B., & Achary, P. G. R. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00357 · Cited by 5
Current Progress and Future Perspectives of Biomaterials in 3D Bioprinting
Saha, P., Nandi, A., Adhikari, J., Ghosh, A., Seikh, A. H., & Ghosh, M. (2024) · Wiley eBooks · doi:10.1002/9781394238316.ch4 · Cited by 5
Rahman, T. T., Rahman, A. M., Pei, Z., Wood, N., & Qin, H. (2024) · Biomimetics · doi:10.3390/biomimetics9100589 · Cited by 5
“Shape fidelity is the ability of a printed construct to maintain its shape compared to the computer design [18–20].”
MethodStereolithography-assisted sodium alginate-collagen hydrogel scaffold with molded internal channels
Wang, C., & Zhou, Y. (2024) · Manufacturing Letters · doi:10.1016/j.mfglet.2024.09.045 · Cited by 5
Direct Ink Writing of Rigid Microparticles
Pradal, P., Kim, J. B., Nam, S. K., Kim, S., & Amstad, E. (2024) · Small · doi:10.1002/smll.202405675 · Cited by 5
Li, Y., Ma, J., Wang, J., Kong, Y., Wang, F., Zhang, P., & Fan, Y. (2024) · Biomedical Materials · doi:10.1088/1748-605x/ada241 · Cited by 6
Impact of Nanoparticle Size and Loading on Printability of Composite Inks for Direct Ink Writing
Li, Y., Flynn, A., Masternick, C., Kolanovic, B., Li, B., & Li, B. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202401443 · Cited by 5
Kim, G., Oh, D., Kim, D., Lee, G., Park, S.-H., Yoon, C., & Nam, S. Y. (2025) · Additive manufacturing · doi:10.1016/j.addma.2025.104667 · Cited by 7
Sustainable 3D printing of bone scaffolds using animal biowaste feedstocks
Dukle, A., & Sankar, M. R. (2025) · Next Sustainability · doi:10.1016/j.nxsust.2025.100099 · Cited by 6
Allyl-Functionalized Polysaccharides for 3D Printable Hydrogels Through Thiol–Ene Click Chemistry
Atmani, Z., Steindorfer, T., Kargl, R., Kleinschek, K. S., Heinze, T. J., & Gericke, M. (2025) · Polysaccharides · doi:10.3390/polysaccharides6010013 · Cited by 5
Chowdhury, S. R., & Basu, B. (2025) · Journal of Biomaterials Applications · doi:10.1177/08853282251330744 · Cited by 7
Chowdhury, S. R., Dey, K., & Basu, B. (2025) · ACS Omega · doi:10.1021/acsomega.4c10743 · Cited by 5
Wang, W., Gao, X., Chen, X., Marzi, A. D., Huang, K., He, R., & Colombo, P. (2025) · Journal of the American Ceramic Society · doi:10.1111/jace.20644 · Cited by 6
3D Bioprinting Applications as New Technology for Nerve Regeneration
Abdolmaleki, A., Karimian, A., Asadi, A., & Ghanimi, H. A. (2023) · Zahedan Journal of Research in Medical Sciences · doi:10.5812/zjrms-121121 · Cited by 5
Models and simulations as enabling technologies for bioprinting process design
Conti, M., Santesarti, G., Scocozza, F., & Marino, M. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-85430-6.00009-1 · Cited by 9
Metadata
- Authors
- Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J.
- Affiliations
- AO Foundation (CH)
- Utrecht University (NL)
- Corresponding author
- Malda, Jos
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-08-28
- Volume
- 120
- Issue
- 19
- Pages
- 10850-10877
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- PMC
- PMC7564085
- OpenAlex
- W3082213210
- Cited by
- 1,359
- References
- 287
- Citations by year
- 2026: 305 · 2025: 283 · 2024: 280 · 2023: 202 · 2022: 176 · 2021: 107 · 2020: 6
- FWCI
- 10.29
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Chemical Reviews (publishedVersion, cc-by-nc-nd)
- PubMed Central (publishedVersion)
- PubMed (publishedVersion)
- University of Twente Research Information (publishedVersion, cc-by-nc-nd)
- HAL (submittedVersion)
- Utrecht University Repository (Utrecht University) (submittedVersion, other-oa)
- University of Twente Research Information (submittedVersion, cc-by-nc-nd)
- Funders
- AO Foundation (3D OC)
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek (024.003.013)
- ReumaNederland (LLP12, LLP22)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Keywords
- bioinks, 3D bioprinting, printability, shape fidelity, hydrogels, extrusion-based bioprinting, rheology, physicochemical parameters, prediction model
- MeSH terms
- Humans, Ink, Tissue Engineering, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.