Printability and Shape Fidelity of Bioinks in 3D Bioprinting
Open accessThe DOI matches its Crossref record; 285 of the 287 references it cites were found in a registry or an index.
Abstract
Three-dimensional bioprinting uses additive manufacturing techniques for the automated fabrication of hierarchically organized living constructs. The building blocks are often hydrogel-based bioinks, which need to be printed into structures with high shape fidelity to the intended computer-aided design. For optimal cell performance, relatively soft and printable inks are preferred, although these undergo significant deformation during the printing process, which may impair shape fidelity. While the concept of good or poor printability seems rather intuitive, its quantitative definition lacks consensus and depends on multiple rheological and chemical parameters of the ink. This review discusses qualitative and quantitative methodologies to evaluate printability of bioinks for extrusion- and lithography-based bioprinting. The physicochemical parameters influencing shape fidelity are discussed, together with their importance in establishing new models, predictive tools and printing methods that are deemed instrumental for the design of next-generation bioinks, and for reproducible comparison of their structural performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures














Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [30]
The cited source says what the claim attributes to it.
In the citing paper
“However, the successful fabrication of stable 3D constructs relies on hydrogels with optimized rheological behavior, structural stability, and physicochemical properties that ensure printability and shape fidelity [7,8,9].”
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Self-citationHinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Fibrinogen and fibrin structure and functions
MOSESSON, M. W. (2005) · Journal of Thrombosis and Haemostasis · doi:10.1111/j.1538-7836.2005.01365.x · Cited by 1,695
Bioinks for 3D bioprinting: an overview
Gungor-Ozkerim, P. S., Inci, I., Zhang, Y. S., Khademhosseini, A., & Dokmeci, M. R. (2018) · Biomaterials Science · doi:10.1039/c7bm00765e · Cited by 1,428
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Research works printed but not linked: 5
- (126) Chimene, D.; Kaunas, R.; Gaharwar, A. K. Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies. Adv. Mater. 2020 , 32 , 1902026. - · DOI · Paper page
- (129) Mezger, T. G. The Rheology Handbook , 3rd revised ed.; Vincentz Network, 2011. -
- (156) Petta, D.; Grijpma, D. W.; Alini, M.; Eglin, D.; D ' Este, M. Three-Dimensional Printing of a Tyramine Hyaluronan Derivative with Double Gelation Mechanism for Independent Tuning of Shear Thinning and Postprinting Curing. ACS Biomater. Sci. Eng. 2018 , 4 , 3088 -3098. - · DOI
- (161) Kiyotake, E. A.; Douglas, A. W.; Thomas, E. E.; Nimmo, S. L.; Detamore, M. S. Development and Quantitative Characterization of the Precursor Rheology of Hyaluronic Acid Hydrogels for Bioprinting. Acta Biomater. 2019 , 95 , 176. - · DOI · Paper page
- (245) ASTM52900-15, I. ; ASTM International: West Conshohocken, PA, 2015. -
Cited by
Items 601–700 of 1,001
Cianciosi, A., Pfeiffle, M., Wohlfahrt, P., Nuernberger, S., & Jüngst, T. (2024) · Advanced Science · doi:10.1002/advs.202403049 · Cited by 15
“Indeed, the scattering of light and the radical diffusion can influence the resin absorbance, at the irradiation wavelength, thus leading to undesired polymerization around the edges of the irradiated spot and affecting the XY plane resolution 31 .”
BackgroundInfluentialWoelken, L., Weckowska, D. M., Dreher, C., & Rauh, C. (2024) · Frontiers in Sustainable Food Systems · doi:10.3389/fsufs.2024.1390720 · Cited by 15
Cardiac Tissue Engineering: A Journey from Scaffold Fabrication to In Vitro Characterization
Ketabat, F., Alcorn, J., Kelly, M., Badea, I., & Chen, D. (2024) · Small Science · doi:10.1002/smsc.202400079 · Cited by 17
Jafari, T., Naghib, S. M., Rahmanian, M., & Mozafari, M. R. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00353 · Cited by 14
Effect of viscosity of gelatin methacryloyl-based bioinks on bone cells
Rashad, A., Gomez, A., Gangrade, A., Zehtabi, F., Mandal, K., Maity, S., Ma, C., Li, B., Khademhosseini, A., & de Barros, N. R. (2024) · Biofabrication · doi:10.1088/1758-5090/ad6d91 · Cited by 16
“After printing, these bioinks undergo gelation through chemical and/or physical cross-linking methods [9, 10].”
Advances in Additive Manufactured Scaffolds Mimicking the Osteochondral Interface
Beeren, I. A. O., Dijkstra, P. J., Mota, C., Camarero‐Espinosa, S., Baker, M. B., & Moroni, L. (2024) · Advanced NanoBiomed Research · doi:10.1002/anbr.202400059 · Cited by 14
Gorgol, D., Mrlík, M., Mikulka, F., Víchová, Z., Mahelová, L., Ilčíková, M., & Minařík, A. (2024) · ACS Applied Bio Materials · doi:10.1021/acsabm.4c00567 · Cited by 15
3D-printed biomimetic scaffolds loaded with ADSCs and BMP-2 for enhanced rotator cuff repair
Wu, Z., Yang, J., Chong, H., Dai, X., Sun, H., Shi, J., Yuan, M., Liu, D., Dang, M., Yao, H., et al. (2024) · Journal of Materials Chemistry B · doi:10.1039/d4tb01073f · Cited by 15
Three-Dimensional Bioprinting for Retinal Tissue Engineering
Wu, K. Y., Osman, R. M., Kearn, N., & Kalevar, A. (2024) · Biomimetics · doi:10.3390/biomimetics9120733 · Cited by 14
3D bioprinting: Advancing the future of food production layer by layer
Chandimali, N., Bak, S.-G., Park, E. H., Cheong, S. H., Park, S., & Lee, S. (2025) · Food Chemistry · doi:10.1016/j.foodchem.2025.142828 · Cited by 15
Flexible 3D‐Printed Cellulosic Constructs for EMI Shielding and Piezoresistive Sensing
Amini, M., Hashemi, S. A., Yu, Z., Ghaffarkhah, A., Kamkar, M., Jiang, F., & Arjmand, M. (2025) · Advanced Materials Technologies · doi:10.1002/admt.202401898 · Cited by 14
Garg, P., Shokrollahi, P., Darge, H. F., Phan, C., & Jones, L. (2025) · Pharmaceutics · doi:10.3390/pharmaceutics17020219 · Cited by 14
“Owing to the precision and high resolution required for the 3D printing of medical devices, SLA-based techniques may prove to be superior compared to other extrusion-based printing methods, which are limited by low-viscosity materials [14].”
Muñoz-Castiblanco, T., Moreno-Marín, J. P., & Osorio, M. (2025) · Bioprinting · doi:10.1016/j.bprint.2025.e00407 · Cited by 18
Ghosh, S., Mohol, S. S., Datta, A., Pandey, P. M., Kulshreshtha, R., Nandan, B., Hakkarainen, M., & Srivastava, R. K. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202404866 · Cited by 14
Biofabrication of engineered tissues by 3D bioprinting of tissue specific high cell-density bioinks
Jeon, O., Park, H., Leach, J. K., & Alsberg, E. (2025) · Materials Today · doi:10.1016/j.mattod.2025.03.021 · Cited by 16
Machour, M., Meretzki, R., Moshe-Haizler, Y., Shuhmaher, M., Safina, D., Levy, M. M., & Levenberg, S. (2025) · Biomaterials · doi:10.1016/j.biomaterials.2025.123406 · Cited by 14
Kansız, S., Vurat, M. T., Parmaksız, M., Elçin, A. E., & Elçin, Y. M. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.144745 · Cited by 14
Fagotto-Clavijo, R., Lodoso‐Torrecilla, I., Díez-Escudero, A., & Ginebra, M. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.05.001 · Cited by 32
“The polymeric chains, which are entangled at rest, align upon shearing, reducing the internal resistance to flow and, thus, its viscosity [90], ensuring printability [91].”
Maciel, B. R., Baki, K., Oelschlaeger, C., & Willenbacher, N. (2022) · Chemie Ingenieur Technik · doi:10.1002/cite.202100139 · Cited by 17
Kazemi, M., Mirzadeh, M., Esmaeili, H., Kazemi, E., Rafienia, M., & Poursamar, S. A. (2022) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2021.0292 · Cited by 15
Microsphere incorporation as a strategy to tune the biological performance of bioinks
Bonany, M., del‐Mazo‐Barbara, L., Español, M., & Ginebra, M. (2022) · Journal of Tissue Engineering · doi:10.1177/20417314221119895 · Cited by 14
Phenol-Grafted Alginate Sulfate Hydrogel as an Injectable FGF-2 Carrier
Goto, R., Nakahata, M., & Sakai, S. (2022) · Gels · doi:10.3390/gels8120818 · Cited by 15
“The observed shear-thinning properties may be explained by the disentanglement and alignment of polymer chains [34].”
BackgroundTorre, M., Giannitelli, S. M., Mauri, E., Gori, M., Bucciarelli, A., Mozetic, P., Gigli, G., Trombetta, M., & Rainer, A. (2023) · Bioprinting · doi:10.1016/j.bprint.2023.e00262 · Cited by 16
Three-dimensional printing of biomaterials for bone tissue engineering: a review
El‐Fiqi, A. (2023) · Frontiers of Materials Science · doi:10.1007/s11706-023-0644-x · Cited by 16
“For example, inks with shear thinning and non-Newtonian flow possess a good printability because they become less viscous when exposed to shear pressures and they have time-independent viscosity [59].”
BackgroundBanerjee, A., Datta, S., Das, A., Chowdhury, A. R., & Datta, P. (2022) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2021.0238 · Cited by 14
Ribeiro, R. D. C., Bom, S., Martins, A. M., Ribeiro, H. M., Santos, C. F., & Marto, J. M. (2023) · Drug Delivery and Translational Research · doi:10.1007/s13346-023-01294-y · Cited by 13
“It consists in the static extrusion of material while the nozzle is suspended in the air, followed by the visual analysis of the printing outcome, to evaluate if the applied pressures are adequate to the gelation status of the ink [18, 41, 42].”
BackgroundMethodInfluentialPlessis, D., Gouws, C., & Nieto, D. (2024) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2024.1391259 · Cited by 13
“Of great importance is also the likely impact the printing process will have on cell viability as reviewed previously (Ning et al., 2020; Schwab et al., 2020; Cook and Rosenzweig, 2021).”
Background3D bioprinting technology and equipment based on microvalve control
Kang, R., Wu, J., Cheng, R., Li, M., Sang, L., Zhang, H., & Sang, S. (2024) · Biotechnology and Bioengineering · doi:10.1002/bit.28850 · Cited by 13
“Over the past decade, 3D bioprinting technology has become a mainstream technology in many biomedical fields, widely applied in areas such as tissue engineering, disease modeling, and drug testing (Daly et al., 2021; Levato et al., 2020; Ouyang et al., 2020a).”
Unlocking new possibilities: application of MXenes in 3D bioprinting for advanced therapy
Waidi, Y. O., & Jain, N. (2024) · Nanoscale · doi:10.1039/d4nr02906b · Cited by 13
4D Bioprinted Self‐Folding Scaffolds Enhance Cartilage Formation in the Engineering of Trachea
Chiesa, I., Esposito, A., Vozzi, G., Gottardi, R., & Maria, C. D. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202401210 · Cited by 13
Lameirinhas, N. S., Carvalho, J. P. F., Teixeira, M. C., Luís, J. L., Esmail, A., Pinto, R. J. B., Oliveira, H., Freitas, F., Oliveira, J. M., Vilela, C., et al. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00382 · Cited by 13
Budharaju, H., Sundaramurthi, D., & Sethuraman, S. (2025) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-024-06855-2 · Cited by 16
“The parameters were set to smoothly extrude the bioink through a nozzle, with precise structure formation, strong interlayer adhesion, high resolution, and cytocompatibility [37].”
Miklosic, G., Oliveira, S. D., Schlittler, M., Visage, C. L., Hélary, C., Ferguson, S. J., & D’Este, M. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2025.123277 · Cited by 13
Self-citationPourmokhtari, M., Mohammad-Namazi, A., Mohseni, N., Imani, R., & Kianfar, P. (2025) · Materials Today Communications · doi:10.1016/j.mtcomm.2025.112094 · Cited by 16
Radical-free photopolymerizable composites of hyaluronic acid and gelatin for tissue engineering
Miklosic, G., Bektas, E. I., Hangartner, A., Pavan, M., Garofolin, G., Galesso, D., Beninatto, R., & D’Este, M. (2025) · Acta Biomaterialia · doi:10.1016/j.actbio.2025.03.017 · Cited by 14
Self-citationBiomolecular Actuators for Soft Robots
Quan, M. C., & Mai, D. J. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00811 · Cited by 16
3D-printed ceramic membranes: Fabrication and hydrogen permeation performance
Bartoletti, A., Mercadelli, E., Saraceni, V., Sangiorgi, A., Gondolini, A., Melandri, C., Pinasco, P., Gramazio, P., Fasolini, A., Maron, J. D., et al. (2025) · Journal of Membrane Science · doi:10.1016/j.memsci.2025.124311 · Cited by 13
Thumma, A. (2025) · RSC Pharmaceutics · doi:10.1039/d5pm00142k · Cited by 13
Shape fidelity and sterility assessment of 3D printed polycaprolactone and hydroxyapatite scaffolds
Scocozza, F., Sakaj, M., Auricchio, F., Marconi, S., Riello, P., Ferrari, C., Cansolino, L., Catenacci, L., Sorrenti, M., Scatto, M., et al. (2021) · Journal of Polymer Research · doi:10.1007/s10965-021-02675-y · Cited by 13
“Adapted from [27] 327 Page 6 of 13 Journal of Polymer Research (2021) 28: 327”
MethodSuthiwanich, K., & Hagiwara, M. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202201660 · Cited by 13
Chitin nanocrystal-assisted 3D bioprinting of gelatin methacrylate scaffolds
Ling, Z., Zhao, J. M., Song, S., Xiao, S., An, Z., Fu, Z., Fu, Z., Shao, J., Zhang, Z., Fu, W., et al. (2023) · Regenerative Biomaterials · doi:10.1093/rb/rbad058 · Cited by 13
“Fortunately, the advent of 3D bioprinting technology presents new possibilities for tissue and organ repair and reconstruction [20–22].”
BackgroundRecent Advances in Engineering Bioinks for 3D Bioprinting
Wang, H., Bi, S., Shi, B., Ma, J., Lv, X., Qiu, J., & Wei, Y. (2023) · Advanced Engineering Materials · doi:10.1002/adem.202300648 · Cited by 15
Singh, K., Wychowaniec, J. K., Edwards‐Gayle, C. J. C., Reynaud, E. G., Rodriguez, B. J., & Brougham, D. F. (2024) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2023.12.151 · Cited by 14
Jantrawut, P., Khangtragool, W., Buri, K., Brachais, C., Chambin, O., Ruksiriwanich, W., Phimolsiripol, Y., & Chaiwarit, T. (2023) · International Journal of Food Science & Technology · doi:10.1111/ijfs.16683 · Cited by 12
Basalt fiber reinforced polypropylene to manufacture 3D printed composites
Peláez-Samaniego, M. R., Rhodes, K., Garcia‐Perez, T., Chang, Y., Zhang, J., Bakri, M. K. B., & Yadama, V. (2024) · Polymer Composites · doi:10.1002/pc.28641 · Cited by 12
Light-Responsive and Antibacterial Graphenic Materials as a Holistic Approach to Tissue Engineering
Ferreras, A., Matesanz, A., Mendizabal, J., Artola, K., Nishina, Y., Acedo, P., Jorcano, J. L., Ruiz, A., Reina, G., & Martín, C. (2024) · ACS Nanoscience Au · doi:10.1021/acsnanoscienceau.4c00006 · Cited by 12
“6 Therefore, for bioinks to be useful for bioprinting, it is important to understand how printing forces impact the viability of enclosed cells.”
An Approach to a Silver Conductive Ink for Inkjet Printer Technology
Kholuiskaya, S. N., Siracusa, V., Mukhametova, G. M., Wasserman, L. A., Kovalenko, V. V., & Иорданский, А. Л. (2024) · Polymers · doi:10.3390/polym16121731 · Cited by 12
“It is important that the substrates for printing are varied in a wide range including polymers, paper, textiles, biomaterials, concretes, etc. [7–9].”
BackgroundSilk Fibroin-Enriched Bioink Promotes Cell Proliferation in 3D-Bioprinted Constructs
Lipari, S., Sacco, P., Marsich, E., & Donati, I. (2024) · Gels · doi:10.3390/gels10070469 · Cited by 12
“A Pr value equal to 1 indicates a perfect square shape [36,44].”
BackgroundSobreiro‐Almeida, R., Santos, S. C., Decarli, M. C., Costa, M., Correia, T. R., Babilotte, J., Custódio, C. A., Moroni, L., & Mano, J. F. (2024) · Advanced Science · doi:10.1002/advs.202406569 · Cited by 12
Stimulus-assisted in situ bioprinting: advancing direct bench-to-bedside delivery
Hwangbo, H., Koo, Y., Nacionales, F., Kim, J., Chae, S., & Kim, G. (2024) · Trends in biotechnology · doi:10.1016/j.tibtech.2024.11.001 · Cited by 14
Decellularized cartilage tissue bioink formulation for osteochondral graft development
Golebiowska, A. A., Tan, M., Ma, A. W. K., & Nukavarapu, S. P. (2025) · Biomedical Materials · doi:10.1088/1748-605x/ada59d · Cited by 12
“Furthermore, the propensity for dcECM-XG samples and dcECM-Laponite® samples to retain shape after printing was compared based on the SR, which is defined as: SR = extrudate diameter/nozzle diameter [34, 35].”
Cao, F., Zadeh, H. N., Świacka, K., Maculewicz, J., Bowles, D., Huber, T., & Clucas, D. M. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.113581 · Cited by 12
Nörnberg, A. B., Gularte, M. S., da Fonseca, C. A. R., José, D. E. J. M. S., Wilhelm, E. A., & Fajardo, A. R. (2025) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2025.114613 · Cited by 12
Kim, J., Lee, J., Cho, J.-K., Bong, K. W., & Song, S. (2025) · Biomaterials Research · doi:10.34133/bmr.0216 · Cited by 12
Bai, X., Yang, Y., Chu, J., Deng, Y., Li, M., & Yang, H. (2025) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2025.1643430 · Cited by 14
Ahmad, S., Alam, H., & Thareja, P. (2025) · RSC Advances · doi:10.1039/d5ra04380h · Cited by 12
Khodve, G., Banerjee, S., Kumari, M., Ravichandiran, V., Banerjee, S., & Roy, S. (2025) · Journal of Translational Medicine · doi:10.1186/s12967-025-07266-9 · Cited by 13
Garcia, R. V., Murphy, E., Sinha, N. J., Okayama, Y., Urueña, J. M., Helgeson, M. E., Bates, C. M., Hawker, C. J., Murphy, R. D., & de Alaniz, J. R. (2023) · Small · doi:10.1002/smll.202302794 · Cited by 12
Hybrid Biofabrication of Heterogeneous 3D Constructs Using Low-Viscosity Bioinks
Kim, S. J., Lee, G., & Park, J. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c05750 · Cited by 12
Emebu, S., Ogunleye, R. O., Achbergerová, E., Vítková, L., Ponížil, P., & Mendoza-Martinez, C. (2023) · Applied Materials Today · doi:10.1016/j.apmt.2023.101914 · Cited by 14
Nanocrystalline Cellulose as a Versatile Engineering Material for Extrusion-Based Bioprinting
Read, S. A., Go, C. S., Ferreira, M. J. S., Ligorio, C., Kimber, S. J., Dumanlı, A. G., & Domingos, M. A. N. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15102432 · Cited by 14
“As reported by Schwab et al., the traditional fabrication window is relatively narrow and does not necessarily reflect the optimal conditions for bioprinting [3].”
BackgroundEmerging Multiscale Biofabrication Approaches for Bacteriotherapy
Rovelli, R., Cecchini, B., Zavagna, L., Azimi, B., Ricci, C., Esin, S., Milazzo, M., Batoni, G., & Danti, S. (2024) · Molecules · doi:10.3390/molecules29020533 · Cited by 12
“Hydrogel precursors have been extensively exploited to formulate inks for 3D extrusion-based bioprinting [70]. extru-sion-based bioprinting [70].”
BackgroundWong, L. Y., Ganguly, S., & Tang, X. S. (2024) · Polymer · doi:10.1016/j.polymer.2024.127305 · Cited by 12
Marquette, C. A., Chastagnier, L., Sousa, B. D., Chocarro‐Wrona, C., Courtial, E., Rae, E., Thomann, C., Carré, A., Essayan, L., Gluzezak, A. J. P., et al. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00351 · Cited by 12
Kim, S. J., Lee, G., & Park, J. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202101326 · Cited by 12
Towards a Novel Cost-Effective and Versatile Bioink for 3D-Bioprinting in Tissue Engineering
Züger, F., Berner, N., & Gullo, M. R. (2023) · Biomimetics · doi:10.3390/biomimetics8010027 · Cited by 12
“Even though printability is a widely used term in BAM, currently there is no general agreement on when a bioink is considered ’ready for printing’ [18].”
BackgroundFalcone, G., Schrüfer, S., Kuth, S., Mazzei, P., Pasquale, S. D., Gaudio, P. D., Aquino, R. P., Boccaccini, A. R., & Russo, P. (2024) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2024.100524 · Cited by 11
Nanocomposite Hydrogel Bioinks for 3D Bioprinting of Tumor Models
Wang, Y., Duan, Y., Yang, B., & Li, Y. (2024) · Biomacromolecules · doi:10.1021/acs.biomac.4c00671 · Cited by 11
dos Santos, V. I., Fredel, M. C., de Matos, R. C., Henriques, B. A. P. D. C., & Grémillard, L. (2024) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2024.09.094 · Cited by 11
Dixit, K., Vishwakarma, A., Kumar, H., Kim, K., & Sinha, N. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.104481 · Cited by 11
Ghosh, A., Bera, A. K., Ghosh, S., Singh, V., Basu, S., & Pati, F. (2024) · Biofabrication · doi:10.1088/1758-5090/ad9409 · Cited by 12
“The two key properties determining the printing transition are the viscosity and elastic recovery properties of hydrogels [105].”
Ahmed, J., Zhang, Y., & Maniruzzaman, M. (2024) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2024.101406 · Cited by 11
Chocarro‐Wrona, C., Pleguezuelos‐Beltrán, P., de Andrés, J. L., Antich, C., de Vicente, J., Jiménez, G., Arias‐Santiago, S., Gálvez‐Martín, P., López‐Ruiz, E., & Marchal, J. A. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101592 · Cited by 11
“Statistical significance: *P < 0.05; **P < 0.01; ***P < 0.005. biofabricated construct [63].”
InfluentialFritz, J., Moser, A., Otahal, A., Redl, H. R., Teuschl, A., Schneider, K. H., & Nehrer, S. (2025) · Macromolecular Bioscience · doi:10.1002/mabi.202400515 · Cited by 12
Xiao, X., Huang, Z., Duan, H., Yang, L., Yang, Y.-C., Lai, Y., Li, C., & Feng, L. (2025) · Biomacromolecules · doi:10.1021/acs.biomac.4c01775 · Cited by 11
Zheng, X., Dong, L., Jiang, H., Aihemaiti, P., Aiyiti, W., & Shuai, C. (2025) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2025.114912 · Cited by 11
Multiscale Engineered Heterogeneous Hydrogel Composites for Digital Light Processing 3D Printing
Zhang, Y., Davis, R., Biswas, S., Miller, S. E., Rehman, S. R. U., Felix, G. T., & Gaharwar, A. K. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c09635 · Cited by 15
Interfacial Polyelectrolyte Complexation-Inspired Bioprinting of Vascular Constructs
Liu, C., & Tong, Y. W. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c01199 · Cited by 11
Multimodal and dynamic cross-linking of modular thiolated alginate-based bioinks
Naeimipour, S., Boroojeni, F. R., Lifwergren, P., Selegård, R., & Aili, D. (2023) · Materials Today Advances · doi:10.1016/j.mtadv.2023.100415 · Cited by 11
“Highly viscous and non-thixotropic hydrogels are difficult to extrude and require high syringe pressures, which can have detrimental effects on cell viability [26].”
Wang, X., Jiang, J., Yuan, C., Gu, L., Zhang, X., Yao, Y., & Shao, L. (2023) · Biomaterials Science · doi:10.1039/d3bm01489d · Cited by 11
Soufivand, A. A., & Budday, S. (2023) · Scientific Reports · doi:10.1038/s41598-023-48711-3 · Cited by 12
“This study aimed to predict the mechanical behavior of bioprinted structures using finite element (FE) simulations to tune the properties to match the target tissue without the need for common trial-and-error experimental approaches 41,42 .”
MethodNieva‐Esteve, G., Agulló, N., Molina, M. G., Adell-Gómez, N., Tarrado, X., Calvo, L., Valls-Esteve, A., Krauel, L., Fenollosa-Artés, F., Texidó, R., et al. (2024) · Materials Advances · doi:10.1039/d4ma00011k · Cited by 11
Localized Ionic Reinforcement of Double Network Granular Hydrogels
Thoma, A., & Amstad, E. (2024) · Small · doi:10.1002/smll.202311092 · Cited by 11
der Heide, D. V., Hatt, L. P., Bella, E. D., Hangartner, A., Lackington, W. A., Yuan, H., Groot, F. B., Stoddart, M. J., & D’Este, M. (2024) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2024.100518 · Cited by 17
Self-citationLiu, X., Wang, X., Wang, Y., Huang, D., Li, K.-W., Luo, M.-J., Liu, D., & Mu, Y. (2024) · Environmental Science & Technology · doi:10.1021/acs.est.4c06120 · Cited by 11
Bera, A., Rizvi, M. S., Kn, V., & Pati, F. (2024) · Biofabrication · doi:10.1088/1758-5090/ad86ec · Cited by 13
“The rheological profile, comprising a range of physicochemical properties characterizing the hydrogel’s deformation and flow behavior, has been instrumental in controlling microfiber alignment via extrusion-based bioprinting (figures S2(b)–(d) [29].”
Double-crosslinked dECM bioink to print a self-sustaining 3D multi-layered aortic-like construct
Potere, F., Venturelli, G., Belgio, B., Guagliano, G., Boschetti, F., Mantero, S., & Petrini, P. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00368 · Cited by 11
van Than, Chatelin, R., Courtial, E., Boulocher, C., & Rieger, R. (2025) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2024.2448557 · Cited by 11
“Once the hydrogel has been printed, crosslinking mechanisms are activated to fix the shape of the scaffold (Ozbolat and Hospodiuk 2016; Schwab et al. 2020), for example, via pH (FitzSimons et al. 2022), photochemical reactions (Chan et al. 2008), enzymatic cross-linking (Heck et al. 2013) or…”
Pawaskar, P., Lekurwale, S., Kumari, M., Roy, S., & Banerjee, S. (2025) · Industrial Crops and Products · doi:10.1016/j.indcrop.2025.120998 · Cited by 11
The Evolution of Fabrication Methods in Human Retina Regeneration
Belgio, B., Salvetti, A. P., Mantero, S., & Boschetti, F. (2021) · Applied Sciences · doi:10.3390/app11094102 · Cited by 13
Huang, Y., Zhao, H., Wang, X., Liu, X., Gao, Z., Bai, H., Lv, F., Gu, Q., & Wang, S. (2022) · Chemical Communications · doi:10.1039/d2cc02176e · Cited by 11
Three-dimensional printing of hyaluronate-based self-healing ferrogel with enhanced stretchability
Mun, C. U., Kim, H. S., Kong, M., & Lee, K. Y. (2022) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2022.113004 · Cited by 11
Dalloul, F., Mietner, J. B., & Navarro, J. R. G. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c02065 · Cited by 11
Printable Poly(N-acryloyl glycinamide) Nanocomposite Hydrogel Formulations
Majstorović, N., Zahedtalaban, M., & Agarwal, S. (2023) · Polymer Journal · doi:10.1038/s41428-023-00798-1 · Cited by 11
“Ongoing research is conducted to satisfy the need for bioinks with good printabilities, biocompatibilities, and adequate mechanical stabilities [10, 11].”
BackgroundMueller, E., Abrishamkar, A., Galaev, R., Lau, K. K., Neely, L., & Hoare, T. R. (2023) · Bioprinting · doi:10.1016/j.bprint.2023.e00307 · Cited by 10
Dedeloudi, A., Martinez‐Marcos, L., Quinten, T., Andersen, S. K., & Lamprou, D. A. (2024) · Expert Opinion on Drug Delivery · doi:10.1080/17425247.2024.2336492 · Cited by 10
“In addition, an SF defines the uniformity and integrity of the structure regarding the digital geometrical characteristics, it is assumed that raster width and gap measurements reveal close values to the original, with >80% occurrence of accordance to the initial pattern [49].”
3D Bioprinting of Sugar Beet Pectin through Horseradish Peroxidase-Catalyzed Cross-Linking
Mubarok, W., Zhang, C., & Sakai, S. (2024) · ACS Applied Bio Materials · doi:10.1021/acsabm.4c00418 · Cited by 10
Milla, A. E. F., DeMaria, W., Wells, D., Jeon, O., Alsberg, E., & Rolle, M. W. (2024) · Biofabrication · doi:10.1088/1758-5090/ad6d8f · Cited by 10
“These bioinks provide printability and mechanical support for cells and allow them to maintain print fidelity [19].”
Teng, T., Zhi, Y., & Akbarzadeh, M. (2024) · Materials & Design · doi:10.1016/j.matdes.2024.113479 · Cited by 10
“Shape fidelity qualitatively assesses deviations from the original de-sign ’ s geometric features, including topology, morphology, details, and textures [48].”
Bioinks for engineering gradient-based osteochondral and meniscal tissue substitutes: a review
Heydarigoojani, M., Farokhi, M., & Simorgh, S. (2025) · Biofabrication · doi:10.1088/1758-5090/adb0f4 · Cited by 10
“…resolution of the deposited fibers by extrusion bioprinting is on the order of 100 µ m and is mainly regulated by the nozzle diameter, which inversely correlates with the magnitude of the shear stress applied to the cells during printing and the rheological properties of the bioinks [15, 101, 102].”
Metadata
- Authors
- Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J.
- Affiliations
- AO Foundation (CH)
- Utrecht University (NL)
- Corresponding author
- Malda, Jos
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-08-28
- Volume
- 120
- Issue
- 19
- Pages
- 10850-10877
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- PMC
- PMC7564085
- OpenAlex
- W3082213210
- Cited by
- 1,359
- References
- 287
- Citations by year
- 2026: 305 · 2025: 283 · 2024: 280 · 2023: 202 · 2022: 176 · 2021: 107 · 2020: 6
- FWCI
- 10.29
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Chemical Reviews (publishedVersion, cc-by-nc-nd)
- PubMed Central (publishedVersion)
- PubMed (publishedVersion)
- University of Twente Research Information (publishedVersion, cc-by-nc-nd)
- HAL (submittedVersion)
- Utrecht University Repository (Utrecht University) (submittedVersion, other-oa)
- University of Twente Research Information (submittedVersion, cc-by-nc-nd)
- Funders
- AO Foundation (3D OC)
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek (024.003.013)
- ReumaNederland (LLP12, LLP22)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Keywords
- bioinks, 3D bioprinting, printability, shape fidelity, hydrogels, extrusion-based bioprinting, rheology, physicochemical parameters, prediction model
- MeSH terms
- Humans, Ink, Tissue Engineering, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.