Printability and Shape Fidelity of Bioinks in 3D Bioprinting
Open accessThe DOI matches its Crossref record; 285 of the 287 references it cites were found in a registry or an index.
Abstract
Three-dimensional bioprinting uses additive manufacturing techniques for the automated fabrication of hierarchically organized living constructs. The building blocks are often hydrogel-based bioinks, which need to be printed into structures with high shape fidelity to the intended computer-aided design. For optimal cell performance, relatively soft and printable inks are preferred, although these undergo significant deformation during the printing process, which may impair shape fidelity. While the concept of good or poor printability seems rather intuitive, its quantitative definition lacks consensus and depends on multiple rheological and chemical parameters of the ink. This review discusses qualitative and quantitative methodologies to evaluate printability of bioinks for extrusion- and lithography-based bioprinting. The physicochemical parameters influencing shape fidelity are discussed, together with their importance in establishing new models, predictive tools and printing methods that are deemed instrumental for the design of next-generation bioinks, and for reproducible comparison of their structural performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures














Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [30]
The cited source says what the claim attributes to it.
In the citing paper
“However, the successful fabrication of stable 3D constructs relies on hydrogels with optimized rheological behavior, structural stability, and physicochemical properties that ensure printability and shape fidelity [7,8,9].”
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Self-citationHinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Fibrinogen and fibrin structure and functions
MOSESSON, M. W. (2005) · Journal of Thrombosis and Haemostasis · doi:10.1111/j.1538-7836.2005.01365.x · Cited by 1,695
Bioinks for 3D bioprinting: an overview
Gungor-Ozkerim, P. S., Inci, I., Zhang, Y. S., Khademhosseini, A., & Dokmeci, M. R. (2018) · Biomaterials Science · doi:10.1039/c7bm00765e · Cited by 1,428
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Research works printed but not linked: 5
- (126) Chimene, D.; Kaunas, R.; Gaharwar, A. K. Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies. Adv. Mater. 2020 , 32 , 1902026. - · DOI · Paper page
- (129) Mezger, T. G. The Rheology Handbook , 3rd revised ed.; Vincentz Network, 2011. -
- (156) Petta, D.; Grijpma, D. W.; Alini, M.; Eglin, D.; D ' Este, M. Three-Dimensional Printing of a Tyramine Hyaluronan Derivative with Double Gelation Mechanism for Independent Tuning of Shear Thinning and Postprinting Curing. ACS Biomater. Sci. Eng. 2018 , 4 , 3088 -3098. - · DOI
- (161) Kiyotake, E. A.; Douglas, A. W.; Thomas, E. E.; Nimmo, S. L.; Detamore, M. S. Development and Quantitative Characterization of the Precursor Rheology of Hyaluronic Acid Hydrogels for Bioprinting. Acta Biomater. 2019 , 95 , 176. - · DOI · Paper page
- (245) ASTM52900-15, I. ; ASTM International: West Conshohocken, PA, 2015. -
Cited by
Items 401–500 of 1,001
Patil, R., & Alimperti, S. (2024) · Journal of Functional Biomaterials · doi:10.3390/jfb15040082 · Cited by 27
Design considerations and biomaterials selection in embedded extrusion 3D bioprinting
Yogeshwaran, S., Hosseinabadi, H. G., Gendy, D. E., & Miri, A. K. (2024) · Biomaterials Science · doi:10.1039/d4bm00550c · Cited by 31
All‐Aqueous Embedded 3D Printing for Freeform Fabrication of Biomimetic 3D Constructs
Deng, X., Cheng, Q., Meng, S., Dong, H., Wang, T., Liu, Z., & Kong, T. (2024) · Advanced Materials · doi:10.1002/adma.202406825 · Cited by 27
Xu, M., Cobo, M. F.-A., Zeng, D., & Zhang, Y. (2024) · Frontiers of Environmental Science & Engineering · doi:10.1007/s11783-025-1921-y · Cited by 27
“Bioinks need to have appropriate rheological properties to ensure printability while maintaining cell viability and functionality (Schwab et al., 2020; Habib and Khoda, 2022).”
Kumar, P., Sharma, J., Kumar, R., Najser, J., Frantík, J., Manuja, A., Sunnam, N., & Praveenkumar, S. (2025) · Biomaterials Science · doi:10.1039/d4bm01606h · Cited by 28
Fluid Mechanics Challenges in Direct-Ink-Writing Additive Manufacturing
Sauret, A., Ray, T. R., & Compton, B. G. (2025) · Annual Review of Fluid Mechanics · doi:10.1146/annurev-fluid-100224-111013 · Cited by 34
Applications of 3D Bio-Printing in Tissue Engineering and Biomedicine
Jiang, W., Mei, H., & Zhao, S. (2021) · Journal of Biomedical Nanotechnology · doi:10.1166/jbn.2021.3078 · Cited by 25
Martorana, A., Pitarresi, G. L., Palumbo, F. S., Barberi, G., Fiorica, C., & Giammona, G. (2022) · Polymers · doi:10.3390/polym14091844 · Cited by 25
“and, above all, the size of the nozzle greatly influence the resolution of the printed construct [16,21].”
BackgroundInfluentialSheikhi, M., Rafiemanzelat, F., Ghodsi, S., Moroni, L., & Setayeshmehr, M. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102997 · Cited by 31
Olmos‐Juste, R., Olza, S., Gabilondo, N., & Eceiza, A. (2022) · Macromolecular Bioscience · doi:10.1002/mabi.202200124 · Cited by 26
Raveendran, N. T., Ivanovski, S., & Vaquette, C. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.09.042 · Cited by 25
Dubashynskaya, N. V., & Skorik, Y. А. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms232112980 · Cited by 26
Flores-Torres, S., Jiang, T., Kort-Mascort, J., Yang, Y. K., Peza-Chavez, O., Pal, S., Mainolfi, A., Pardo, L. A., Ferri, L. E., Bertos, N., et al. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c00998 · Cited by 25
Liu, S., Bernhardt, A., Wirsig, K., Lode, A., Hu, Q., Gelinsky, M., & Kilian, D. (2023) · Composites Part B Engineering · doi:10.1016/j.compositesb.2023.110804 · Cited by 26
3D Printing of Ionogels with Complementary Functionalities Enabled by Self‐Regulating Ink
Huang, J., Yu, Z., & Wu, P. (2023) · Advanced Science · doi:10.1002/advs.202302891 · Cited by 25
Tailoring biomaterials for biomimetic organs-on-chips
Sun, L., Bian, F., Xu, D., Luo, Y., Wang, Y., & Zhao, Y. (2023) · Materials Horizons · doi:10.1039/d3mh00755c · Cited by 27
Recent advances in 4D printing of hydrogels
Li, T., Huang, Z., Tsui, C. P., Tang, C. Y., & Deng, Y. (2024) · REVIEWS ON ADVANCED MATERIALS SCIENCE · doi:10.1515/rams-2024-0028 · Cited by 27
High mechanical performance and multifunctional degraded fucoidan-derived bioink for 3D bioprinting
Zhu, S., Zhou, Z. Y., Chen, X., Zhu, W., Yang, M., Yu, M., Sun, J., Zuo, Y., He, J., Pan, H., et al. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.122805 · Cited by 25
Li, H., Chen, S., Dissanayaka, W. L., & Wang, M. (2024) · ACS Omega · doi:10.1021/acsomega.4c06458 · Cited by 26
Dual crosslinkable bioink for direct and embedded 3D bioprinting at physiological temperature
Wang, Y., Yue, H., Liu, A., Cui, Y., Hou, Y., Ni, X., Pereira, R. F., Huang, B., Vyas, C., & Bártolo, P. (2025) · Materials Today · doi:10.1016/j.mattod.2025.02.005 · Cited by 26
3D Bioprinting Models for Glioblastoma: From Scaffold Design to Therapeutic Application
Branco, F., Cunha, J., Mendes, M., Sousa, J., & Vitorino, C. (2025) · Advanced Materials · doi:10.1002/adma.202501994 · Cited by 28
Hybrid 3D Bioprinting of Sustainable Biomaterials for Advanced Multiscale Tissue Engineering
Ma, X., Xu, M., Cui, X., Yin, J., & Wu, Q. (2025) · Small · doi:10.1002/smll.202408947 · Cited by 35
Banigo, A. T., Nauta, L., Zoetebier, B., & Karperien, M. (2025) · Polymers · doi:10.3390/polym17070917 · Cited by 26
“These parameters play important roles in material deposition, resolution, and cell viability [162], as follows: i. Pressure: The printing pressure settings must be carefully adjusted based on various factors, like the material viscosity, nozzle size, and desired resolution.”
Min, S. J., Lee, J. S., Nah, H., Kim, S. H., Moon, H., Reis, R. L., Kwon, I. K., & Heo, D. N. (2021) · Biofabrication · doi:10.1088/1758-5090/ac1993 · Cited by 24
“However, the unexpected physical properties of bioinks are a limitation and present a significant challenge in healthcare [6–9].”
Trends in Tissue Bioprinting, Cell-Laden Bioink Formulation, and Cell Tracking
Vázquez‐Aristizabal, P., Perumal, G., García‐Astrain, C., Liz‐Marzán, L. M., & Izeta, A. (2022) · ACS Omega · doi:10.1021/acsomega.2c01398 · Cited by 25
Continuous 3D printing of microstructured multifunctional materials
Guan, L., Fan, J., Chan, X. Y., & Ferrand, H. L. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103373 · Cited by 24
Loi, G., Stucchi, G., Scocozza, F., Cansolino, L., Cadamuro, F., Delgrosso, E., Riva, F., Ferrari, C., Russo, L., & Conti, M. (2023) · Gels · doi:10.3390/gels9020129 · Cited by 24
“This aspect is crucial for TE and regenerative medicine [41] and it is a specific bioink-based behavior.”
BackgroundMethodInfluentialBaur, E., Hirsch, M., & Amstad, E. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202201763 · Cited by 28
Xiao, X., Yang, Y.-C., Lai, Y., Huang, Z., Li, C., Yang, S., Niu, C., Yang, L., & Feng, L. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.3c00887 · Cited by 25
The microparticulate inks for bioprinting applications
An, C., Zhang, S., Xu, J., Zhang, Y., Dou, Z., Shao, F., Long, C., Yang, J., Wang, H., & Liu, J. (2023) · Materials Today Bio · doi:10.1016/j.mtbio.2023.100930 · Cited by 29
“During extrusion bioprinting, ink print-ability generally refers to the “ suitable ” extrudability, filament formation, and shape fidelity [58].”
BackgroundSakai, S., Yamamoto, S., Hirami, R., Hidaka, M., & Elvitigala, K. C. M. L. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.112960 · Cited by 25
Developing 3D bioprinting for organs-on-chips
Wu, Z., Liu, R., Shao, N., & Zhao, Y. (2025) · Lab on a Chip · doi:10.1039/d4lc00769g · Cited by 24
Bioprinting of Organ-on-Chip Systems: A Literature Review from a Manufacturing Perspective
Thakare, K., Jerpseth, L., Pei, Z., Elwany, A. H., Quek, F. K. H., & Qin, H. (2021) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp5030091 · Cited by 36
“Bioink also needs to have suitable mechanical properties so that the printed construct is stable [47].”
BackgroundYao, Y., Molotnikov, A., Parkington, H. C., Meagher, L., & Forsythe, J. S. (2022) · Biofabrication · doi:10.1088/1758-5090/ac6e87 · Cited by 26
“Within the bioink precursor, the yield stress is correlated with the number of chain entanglements [43].”
InfluentialExtrusion bioprinting from a fluid mechanics perspective
Gharraei, R., Bergstrom, D. J., & Chen, D. (2024) · International Journal of Bioprinting · doi:10.36922/ijb.3973 · Cited by 32
Volumetric bioprinting of the osteoid niche
Duquesne, J., Parmentier, L., Vermeersch, E., Lemaire, F., Seo, J. W., Dmitriev, R. I., & Vlierberghe, S. V. (2025) · Biofabrication · doi:10.1088/1758-5090/adab25 · Cited by 25
“Finally, support structures are needed when overhangs or through holes are printed, requiring dedicated post-processing strategies [11, 18].”
Salama, A. H. (2025) · Future Journal of Pharmaceutical Sciences · doi:10.1186/s43094-025-00866-8 · Cited by 27
Unconventional bioprinting modalities for advanced tissue biofabrication
Derman, İ. D., Kim, M. H., Sarikaya, M. D., Yilmaz, Y. O., Aliftiras, E. G., Stepanyants, V., Rivera, T., & Ozbolat, I. T. (2025) · Biomaterials · doi:10.1016/j.biomaterials.2025.123704 · Cited by 28
Review of additive manufacturing with 2D MXene: techniques, applications, and future perspectives
Li, T., Jabari, E., McLellan, K., & Naguib, H. E. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-023-00424-9 · Cited by 23
Seymour, A. J., Kilian, D., Navarro, R. S., Hull, S. M., & Heilshorn, S. C. (2023) · Biomaterials Science · doi:10.1039/d3bm00721a · Cited by 24
UV-Assisted Direct Ink Writing of Dual-Cure Polyurethanes
Hausladen, M. M., Gorbea, G. D., Francis, L. F., & Ellison, C. J. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c02806 · Cited by 24
Bioprinted research models of urological malignancy
Wang, G., Mao, X., Wang, W., Xiaolong, W., Li, S., & Wang, Z. (2024) · Exploration · doi:10.1002/exp.20230126 · Cited by 31
An innovative 4D printing approach for fabrication of anisotropic collagen scaffolds
Patrawalla, N. Y., Liebendorfer, K., & Kishore, V. (2024) · Biofabrication · doi:10.1088/1758-5090/ad7f8f · Cited by 25
“Shape retention of the printed scaffolds depend on the underlying material properties such as viscoelasticity and YS that greatly impact the recovery kinetics, ink resistance to deformation, and vertical print-ability of multilayered scaffolds [29, 30].”
BackgroundMulti‐Material Gradient Printing Using Meniscus‐enabled Projection Stereolithography (MAPS)
Kunwar, P., Poudel, A., Aryal, U., Xie, R., Geffert, Z. J., Wittmann, H., Fougnier, D., Chiang, T. H., Maye, M. M., Li, Z., et al. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202400675 · Cited by 23
3D printing non-cylindrical strands: Morphological and structural implications
Raymond, Y., Thorel, E., Liversain, M., Riveiro, A., Pou, J., & Ginebra, M. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102129 · Cited by 26
Bioinks of Natural Biomaterials for Printing Tissues
Rijal, G. (2023) · Bioengineering · doi:10.3390/bioengineering10060705 · Cited by 30
“Printing is successful when the 3D-printed construct has high shape fidelity and the optimum microenvironment for cell survival, proliferation, and growth is assured [6,7].”
BackgroundDrozdov, A. D., & Christiansen, J. D. C. (2024) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2024.112150 · Cited by 26
Micromixer driven by bubble-induced acoustic microstreaming for multi-ink 3D bioprinting
Hidaka, M., Kojima, M., & Sakai, S. (2024) · Lab on a Chip · doi:10.1039/d4lc00552j · Cited by 22
Self‐Assembled Hydroxypropyl Celluloses With Structural Colors for Biomedical Applications
Zhang, Z., & Shang, L. (2025) · Smart Medicine · doi:10.1002/smmd.70004 · Cited by 24
Johari, N., Adabavazeh, Z., & Baino, F. (2025) · Bioprinting · doi:10.1016/j.bprint.2025.e00419 · Cited by 27
Prakash, A., Malviya, R., Sridhar, S. B., Wadhwa, T., Shareef, J., & Tripathy, D. B. (2025) · Next Materials · doi:10.1016/j.nxmate.2025.101255 · Cited by 23
Advances in 3D Bioprinting: Materials, Processes, and Emerging Applications
Jose, S. A., Evtimow, A., & Menezes, P. L. (2026) · Micromachines · doi:10.3390/mi17030282 · Cited by 25
Bioinks—materials used in printing cells in designed 3D forms
Tamay, D. G., & Hasırcı, N. (2021) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2021.1892470 · Cited by 24
Ma, J., Wu, S., Liu, J., Liu, C., Ni, S., Dai, T., Wu, X., Zhang, Z., Qu, J., Zhao, H., et al. (2022) · Biomaterials Science · doi:10.1039/d2bm00547f · Cited by 24
Prospect and retrospect of 3D bio-printing
Prabhakaran, P., Palaniyandi, T., Kanagavalli, B., Kumar, V. R., Hari, R., Sandhiya, V., Baskar, G., Rajendran, B. K., & Sivaji, A. (2022) · Acta Histochemica · doi:10.1016/j.acthis.2022.151932 · Cited by 22
A Small‐Molecule Polycationic Crosslinker Boosts Alginate‐Based Bioinks for Extrusion Bioprinting
Gao, C., Tang, L., Qu, H., Wu, M., Zhou, T., Wen, C., Wang, P., Xu, N., & Ruan, C. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202310369 · Cited by 22
Inkjet printing-based high-throughput DNA synthesis
Deng, X. J., Li, H., & Song, Y. (2023) · Giant · doi:10.1016/j.giant.2023.100222 · Cited by 23
3D printing of cellulose nanocrystal-based Pickering foams for removing microplastics
Xu, B. Z., Hu, X., Lu, S., Wang, T., Chen, Z., Bai, C., Ma, T., & Song, Y. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.126642 · Cited by 22
Strategies for employee retention in high turnover sectors: An empirical investigation
Masood, R. Z. (2024) · International Journal of Research in Human Resource Management · doi:10.33545/26633213.2024.v6.i1a.167 · Cited by 28
“Additionally, the rapid acceleration of digital transformation initiatives has necessitated a focus on digital literacy and resilience among employees, further emphasizing the importance of leadership in navigating these transitions (Schwab, 2020) [28] .”
BackgroundPalamidi, A., Koumentakou, I., Michopoulou, A., Bikiaris, D. Ν., & Terzopoulou, Z. N. (2024) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2024.124776 · Cited by 24
Hu, C., Haider, M. S., Hahn, L., Yang, M., & Luxenhofer, R. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb00484k · Cited by 22
Biomimetic macroporous hydrogel with a triple-network structure for full-thickness skin regeneration
Long, X., Xu, X. G., Sun, D., Hong, Y., Wen, C., Xie, Y., Yan, B., Zhang, H., Ge, Q., Li, W., et al. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101442 · Cited by 28
Towards the creation of personalized bakery products using 3D food printing
Zhang, L., Noort, M. W. J., & van Bommel, K. J. C. (2022) · Advances in food and nutrition research · doi:10.1016/bs.afnr.2021.11.002 · Cited by 32
Extrusion bioprinting: meeting the promise of human tissue biofabrication?
Holland, I. (2025) · Progress in Biomedical Engineering · doi:10.1088/2516-1091/adb254 · Cited by 26
“Shape fidelity is defined as the closeness of the extruded structure to the macroscale digital model [ 6, 164].”
Liu, Y., Dai, Y., Xia, X., Zhai, K., Jin, Y., Zhai, Y., Zhao, B., & Dong, M. (2025) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2025.111476 · Cited by 23
Light-activated decellularized extracellular matrix-based bioinks for enhanced mechanical integrity
Kim, M., Kang, D., Han, H., & Jang, J. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101859 · Cited by 29
“These improvements led to enhanced printability and structural fidelity, making it possible to fabricate robust 3D-printed tissue constructs with better shape retention and resolution [59].”
Matavosian, A. A., & Bonassar, L. J. (2025) · Biofabrication · doi:10.1088/1758-5090/ae11d4 · Cited by 22
“For instance, hydrogels exhibit viscoelastic and shear-thinning behavior during extrusion [28–31], which influences: printing parameters through rheology [32, 33]; shape fidelity through crosslinking [34–36]; and cell viability through shear stresses [37–39].”
Investigation of Collagen-Incorporated Sodium Alginate Bioprinting Hydrogel for Tissue Engineering
Chen, Y., Zhou, Y., & Wang, C. (2022) · Journal of Composites Science · doi:10.3390/jcs6080227 · Cited by 21
Potere, F., Belgio, B., Croci, G. A., Tabano, S. M., Petrini, P., Dubini, G., Boschetti, F., & Mantero, S. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.918690 · Cited by 22
Design of a novel bioink suitable for the 3D printing of lymphoid cells
Ribezzi, D., Pinos, R., Bonetti, L., Cellani, M., Barbaglio, F., Scielzo, C., & Farè, S. (2023) · Frontiers in Biomaterials Science · doi:10.3389/fbiom.2023.1081065 · Cited by 21
“Hence, a value close to 1 is desired, as it would represent the optimal ratio between the printed filament diameter and the theoretical one (Schwab et al., 2020).”
BackgroundThree-dimensional bioprinting for medical applications
Abaci, A., Camci‐Unal, G., Güvendiren, M., & Editors, G. (2023) · MRS Bulletin · doi:10.1557/s43577-023-00546-z · Cited by 23
Gil, C. J., Evans, C. J., Li, L., Allphin, A. J., Tomov, M. L., Jin, L., Vargas, M., Hwang, B., Wang, J., Putaturo, V. R., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202302271 · Cited by 22
Jahangir, S., Vecstaudža, J., Augurio, A., Canciani, E., Stīpniece, L., Ločs, J., Alini, M., & Serra, T. (2023) · Materials · doi:10.3390/ma16227214 · Cited by 23
“…Figure S1 S1: Primer and probe sequences for qRT-PCR; Table S2: List of assays on demand used for qRT-PCR; Table S3: The concentration of chemical elements in nHA besides Ca and P; Table S4: Characteristics of nHA synthesized by wet precipitation technology.”
MethodKara, A., Distler, T., Akkineni, A. R., Tıhmınlıoğlu, F., Gelinsky, M., & Boccaccini, A. R. (2024) · Biofabrication · doi:10.1088/1758-5090/ad2c98 · Cited by 21
“The higher viscosity of the ink at rest, determined by the re-organization of interactions between suspended particles, provides shape stability [33, 34].”
BackgroundNing, L., Zanella, S., Tomov, M. L., Amoli, M. S., Jin, L., Hwang, B., Saadeh, M., Chen, H., Neelakantan, S., Dasi, L. P., et al. (2024) · Advanced Science · doi:10.1002/advs.202400476 · Cited by 25
Liu, H., Deng, X., Zhao, X., Cao, P., & Li, Y. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.134549 · Cited by 21
3D bioprinted GelMA scaffolds for clinical applications: Promise and challenges
Das, S., Valoor, R., Jegadeesan, J. T., & Basu, B. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00365 · Cited by 25
Advances in Injectable Polymeric Biomaterials and Their Contemporary Medical Practices
Beilharz, S., Debnath, M. K., Vinella, D., Shoffstall, A. J., & Karayilan, M. (2024) · ACS Applied Bio Materials · doi:10.1021/acsabm.4c01001 · Cited by 22
Harnessing native blueprints for designing bioinks to bioprint functional cardiac tissue
Akter, M. Z., Tufail, F., Ahmad, A., Oh, Y. W., Kim, J. M., Kim, S., Hasan, M. M., Li, L., Lee, D., Kim, Y. S., et al. (2025) · iScience · doi:10.1016/j.isci.2025.111882 · Cited by 22
“203,204 For a bioink formulation, viscosity is an essential parameter because it impacts both print fidelity and cell encapsulation efficiency.”
Biofabrication Strategies for Musculoskeletal Disorders: Evolution towards Clinical Applications
Naghieh, S., Lindberg, G. C. J., Tamaddon, M., & Liu, C. (2021) · Bioengineering · doi:10.3390/bioengineering8090123 · Cited by 23
“rheological requirements [60,157] and the subsequent development of a wide library of Figure 5.”
BackgroundInfluentialPang, B., Ajdary, R., Antonietti, M., Rojas, O. J., & Filonenko, S. (2021) · Materials Horizons · doi:10.1039/d1mh01741a · Cited by 21
Scalzone, A., Cerqueni, G., Bonifacio, M. A., Pistillo, M., Cometa, S., Mattioli‐Belmonte, M., Wang, X. N., Dalgarno, K. W., Ferreira, A. M., Giglio, E. D., et al. (2022) · Materials Today Bio · doi:10.1016/j.mtbio.2022.100287 · Cited by 22
“This behaviour could be related to an increase in the shear-thinning performance of the GGMA formulation with the addition of MH, which allows the shape preservation of the bioink during the extrusion [55,56].”
BackgroundMathematical and computational models in spheroid-based biofabrication
Arjoca, S., Robu, A., Neagu, M., & Neagu, A. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.07.024 · Cited by 22
Predicting rheological properties of HAMA/GelMA hybrid hydrogels via machine learning
Deng, B., Chen, S., Lasaosa, F. L., Xue, X., Chen, X., Mao, H., Cui, Y., Gu, Z., & Doblaré, M. (2025) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2025.107005 · Cited by 20
Vat photopolymerization‐based bioprinting: Shaping next‐generation tissues with light
Ng, W. K., Paula, C. T. B., Serra, A. C., Coelho, J. F. J., & Bártolo, P. (2026) · Interdisciplinary medicine · doi:10.1002/inmd.70078 · Cited by 26
Tu, Y., Hassan, A., Arrieta‐Escobar, J. A., Zaman, U. K. U., Siadat, A., & Yang, G. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08999-3 · Cited by 20
“Evaluation of FEF should consider both the mean diameter and the stability as these two indicators have the most significant influence on the printing quality [27].”
BackgroundKumar, A., Dixit, K., & Sinha, N. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.02.130 · Cited by 21
Alginate-waterborne polyurethane 3D bioprinted scaffolds for articular cartilage tissue engineering
Olmos‐Juste, R., Larrañaga-Jaurrieta, G., Larraza, I., Ramos-Díez, S., Camarero‐Espinosa, S., Gabilondo, N., & Eceiza, A. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.127070 · Cited by 22
Fabrication of Sodium Trimetaphosphate-Based PEDOT:PSS Conductive Hydrogels
Reynolds, M., Stoy, L. M., Sun, J., Amponsah, P. E. O., Li, L., Soto, M., & Song, S. (2024) · Gels · doi:10.3390/gels10020115 · Cited by 20
“Our highly interpenetrating STMP-based PEDOT:PSS conductive hydrogels, with tunable abilities for electrical and mechanical characteristics, can provide physiological environmental cues for future tissue engineering applications.”
BackgroundKim, J., Lee, H., Lee, G., Ryu, D., & Kim, G. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.02.020 · Cited by 36
“However, normal bioprinting processes frequently require high concentrations of hydrogel bioink to ensure the mechanical stability of 3D bioconstructs with uniquely designed physical cues [5 – 8].”
BackgroundDobrișan, M.-R., Lungu, A., & Ioniţă, M. (2024) · Virtual and Physical Prototyping · doi:10.1080/17452759.2024.2378003 · Cited by 22
“These parameters describe the printing behaviour of the materials, where the G ′′ /G ′ ratio gives the loss tangent, a parameter that indicates the suitability of a material for bioprinting [29].”
3D-Printed Interfacially Jammed Emulsion Aerogels
Hashemi, S. A., Ghaffarkhah, A., Hosseini, H., & Arjmand, M. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c09971 · Cited by 20
Shokrollahi, P., Garg, P., Wulff, D., Hui, A., Phan, C., & Jones, L. (2024) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2024.124999 · Cited by 23
Liu, H., Mei, H., Jiang, H., Jiang, L., Lin, K. L., Jiang, M., Ding, N., Li, X., Gao, Z., Liu, B., et al. (2024) · Small · doi:10.1002/smll.202407105 · Cited by 30
Montanari, M., Korkeamäki, J. T., Campodoni, E., Mohamed‐Ahmed, S., Mustafa, K., Sandri, M., & Rashad, A. (2025) · ACS Applied Bio Materials · doi:10.1021/acsabm.4c01418 · Cited by 22
Andriamiseza, F., Bordignon, D., Payré, B., Vaysse, L., & Fitremann, J. (2022) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2022.02.076 · Cited by 22
Xu, H., Salazar, D. M. M., & Xu, C. (2022) · Machines · doi:10.3390/machines10050315 · Cited by 20
“Bioink is usually composed of two major components including hydrogel solutions and living cells [33].”
Backgroundhadad, A. A. E., Alcudia, A., Begines, B., Perez-Soriano, E. M., & Torres, Y. (2022) · Applied Materials Today · doi:10.1016/j.apmt.2022.101603 · Cited by 24
Effect of sterilization processes on alginate/gelatin inks for three-dimensional printing
Carranza, T., Zalba-Balda, M., Baraibar, M. J. B., de la Caba, K., & Guerrero, P. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v9i1.645 · Cited by 20
“This shear thinning behavior is desirable for 3D-printing applications since viscosity will decrease when shear rate increases during extrusion and thus, sample could be extruded [44–46] .”
Maldonado-Rosas, R., Alfaro-Ponce, M., Cuan‐Urquizo, E., & Tejada-Ortigoza, V. A. (2025) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2025.112534 · Cited by 19
Metadata
- Authors
- Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J.
- Affiliations
- AO Foundation (CH)
- Utrecht University (NL)
- Corresponding author
- Malda, Jos
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-08-28
- Volume
- 120
- Issue
- 19
- Pages
- 10850-10877
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- PMC
- PMC7564085
- OpenAlex
- W3082213210
- Cited by
- 1,359
- References
- 287
- Citations by year
- 2026: 305 · 2025: 283 · 2024: 280 · 2023: 202 · 2022: 176 · 2021: 107 · 2020: 6
- FWCI
- 10.29
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Chemical Reviews (publishedVersion, cc-by-nc-nd)
- PubMed Central (publishedVersion)
- PubMed (publishedVersion)
- University of Twente Research Information (publishedVersion, cc-by-nc-nd)
- HAL (submittedVersion)
- Utrecht University Repository (Utrecht University) (submittedVersion, other-oa)
- University of Twente Research Information (submittedVersion, cc-by-nc-nd)
- Funders
- AO Foundation (3D OC)
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek (024.003.013)
- ReumaNederland (LLP12, LLP22)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Keywords
- bioinks, 3D bioprinting, printability, shape fidelity, hydrogels, extrusion-based bioprinting, rheology, physicochemical parameters, prediction model
- MeSH terms
- Humans, Ink, Tissue Engineering, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.