Printability and Shape Fidelity of Bioinks in 3D Bioprinting
Open accessThe DOI matches its Crossref record; 285 of the 287 references it cites were found in a registry or an index.
Abstract
Three-dimensional bioprinting uses additive manufacturing techniques for the automated fabrication of hierarchically organized living constructs. The building blocks are often hydrogel-based bioinks, which need to be printed into structures with high shape fidelity to the intended computer-aided design. For optimal cell performance, relatively soft and printable inks are preferred, although these undergo significant deformation during the printing process, which may impair shape fidelity. While the concept of good or poor printability seems rather intuitive, its quantitative definition lacks consensus and depends on multiple rheological and chemical parameters of the ink. This review discusses qualitative and quantitative methodologies to evaluate printability of bioinks for extrusion- and lithography-based bioprinting. The physicochemical parameters influencing shape fidelity are discussed, together with their importance in establishing new models, predictive tools and printing methods that are deemed instrumental for the design of next-generation bioinks, and for reproducible comparison of their structural performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures














Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [30]
The cited source says what the claim attributes to it.
In the citing paper
“However, the successful fabrication of stable 3D constructs relies on hydrogels with optimized rheological behavior, structural stability, and physicochemical properties that ensure printability and shape fidelity [7,8,9].”
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Self-citationHinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Fibrinogen and fibrin structure and functions
MOSESSON, M. W. (2005) · Journal of Thrombosis and Haemostasis · doi:10.1111/j.1538-7836.2005.01365.x · Cited by 1,695
Bioinks for 3D bioprinting: an overview
Gungor-Ozkerim, P. S., Inci, I., Zhang, Y. S., Khademhosseini, A., & Dokmeci, M. R. (2018) · Biomaterials Science · doi:10.1039/c7bm00765e · Cited by 1,428
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Research works printed but not linked: 5
- (126) Chimene, D.; Kaunas, R.; Gaharwar, A. K. Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies. Adv. Mater. 2020 , 32 , 1902026. - · DOI · Paper page
- (129) Mezger, T. G. The Rheology Handbook , 3rd revised ed.; Vincentz Network, 2011. -
- (156) Petta, D.; Grijpma, D. W.; Alini, M.; Eglin, D.; D ' Este, M. Three-Dimensional Printing of a Tyramine Hyaluronan Derivative with Double Gelation Mechanism for Independent Tuning of Shear Thinning and Postprinting Curing. ACS Biomater. Sci. Eng. 2018 , 4 , 3088 -3098. - · DOI
- (161) Kiyotake, E. A.; Douglas, A. W.; Thomas, E. E.; Nimmo, S. L.; Detamore, M. S. Development and Quantitative Characterization of the Precursor Rheology of Hyaluronic Acid Hydrogels for Bioprinting. Acta Biomater. 2019 , 95 , 176. - · DOI · Paper page
- (245) ASTM52900-15, I. ; ASTM International: West Conshohocken, PA, 2015. -
Cited by
Items 201–300 of 1,001
Vascularized adipose tissue engineering: moving towards soft tissue reconstruction
Peirsman, A., Nguyen, H. T., Waeyenberge, M. V., Ceballos‐González, C. F., Bolívar‐Monsalve, E. J., Kawakita, S., Vanlauwe, F., Tirpáková, Z., Dorpe, S. V., Damme, L. V., et al. (2023) · Biofabrication · doi:10.1088/1758-5090/acd7a5 · Cited by 52
Translational Application of 3D Bioprinting for Cartilage Tissue Engineering
McGivern, S., Boutouil, H., Al-Kharusi, G., Little, S., Dunne, N., & Levingstone, T. J. (2021) · Bioengineering · doi:10.3390/bioengineering8100144 · Cited by 54
“The printability of a bioink is strongly dependent on a number of its other properties such as bioink homogeneity, rheological properties, viscosity, crosslinking ability, surface tension, and the bioprinting technique used [7].”
Background3D Printed Ultrasensitive Graphene Hydrogel Self-Adhesive Wearable Devices
Wang, Z., Song, H., Chen, L., Li, W., Yang, D., Cheng, P., & Duan, H. (2022) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.2c00867 · Cited by 48
Sensors-integrated organ-on-a-chip for biomedical applications
Chen, H., Luo, Z., Lin, X., Zhu, Y., & Zhao, Y. (2023) · Nano Research · doi:10.1007/s12274-023-5651-9 · Cited by 47
Chiesa, I., Maria, C. D., Ceccarini, M. R., Mussolin, L., Coletta, R., Morabito, A., Tonin, R., Calamai, M., Morrone, A., Beccari, T., et al. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c04078 · Cited by 50
Biological activity of multicomponent bio-hydrogels loaded with tragacanth gum
Polez, R. T., Morits, M., Jonkergouw, C., Phiri, J., Valle‐Delgado, J. J., Linder, M. B., Maloney, T. C., Rojas, O. J., & Österberg, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.06.153 · Cited by 48
“As soon as the shear rate decreases, the ink viscosity increases immediately, making the print more solid-like [39].”
BackgroundPrint‐and‐Grow within a Novel Support Material for 3D Bioprinting and Post‐Printing Tissue Growth
Machour, M., Hen, N., Goldfracht, I., Safina, D., Davidovich‐Pinhas, M., Bianco‐Peled, H., & Levenberg, S. (2022) · Advanced Science · doi:10.1002/advs.202200882 · Cited by 52
Three-dimensional bioprinting of artificial blood vessel: Process, bioinks, and challenges
Hou, Y., Cui, X., Qin, Z., Su, C., Zhang, G., Tang, J., Li, J., & Zhang, J. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.740 · Cited by 48
“The core issue of 3D printing is to choose the suitable and functional bioink to load the cells at designated locations[14].”
Sustainable Sources of Raw Materials for Additive Manufacturing of Bone‐Substituting Biomaterials
Putra, N. E., Zhou, J., & ZADPOOR, A. A. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202301837 · Cited by 54
Three-Dimensional Printing Using a Maize Protein: Zein-Based Inks in Biomedical Applications
Negrete, J. A. T., Aceves-Colin, A. E., Rivera-Flores, D. C., Díaz-Armas, G. G., Mertgen, A.-S., Trinidad-Calderón, P. A., Olmos-Cordero, J. M., Gómez-López, E. G., Pérez‐Carrillo, E., Escobedo‐Avellaneda, Z., et al. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00544 · Cited by 48
A 3D‐Bioprinted Multiple Myeloma Model
Wu, D., Wang, Z., Li, J., Song, Y. Y., Pérez, M. E. M., Wang, Z., Cao, X., Cao, C., Maharjan, S., Anderson, K. C., et al. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202100884 · Cited by 53
Munoz-Perez, E., Perez‐Valle, A., Igartúa, M., Santos‐Vizcaíno, E., & Hernández, R. M. (2023) · Biomaterials Advances · doi:10.1016/j.bioadv.2023.213414 · Cited by 46
Gelatin methacryloyl and Laponite bioink for 3D bioprinted organotypic tumor modeling
de Barros, N. R., Gomez, A., Ermis, M., Falcone, N., Haghniaz, R., Young, P., Gao, Y., Aquino, A.-F., Li, S., Niu, S., et al. (2023) · Biofabrication · doi:10.1088/1758-5090/ace0db · Cited by 49
“Generally, bioinks with improved injection forces are preferred due to their high viscosity and shape fidelity, which can improve 3D bioprinting outcomes [48].”
Fibrinogen-Based Bioink for Application in Skin Equivalent 3D Bioprinting
Cavallo, A., Kayal, T. A., Mero, A., Mezzetta, A., Guazzelli, L., Soldani, G., & Losi, P. (2023) · Journal of Functional Biomaterials · doi:10.3390/jfb14090459 · Cited by 46
Biocompatible Stimuli-Sensitive Natural Hydrogels: Recent Advances in Biomedical Applications
Moreno, J. M. C., Chelu, M., & Popa, M. (2025) · Gels · doi:10.3390/gels11120993 · Cited by 53
“Progress in bioink formulation, combining natural polymers with reversible crosslinks or shear-thinning behavior, has enabled high-fidelity bioprinting of cartilage, vascular and skin constructs [94–96].”
Sharma, R., Kirsch, R. L., Valente, K. P., Perez, M. R., & Willerth, S. M. (2021) · Processes · doi:10.3390/pr9071205 · Cited by 46
“However, to successfully engineer mature bioprinted tissues for drug testing, a bioink should be printed as a desired structure to maintain its integrity over the culture period to support cell growth and differentiation [13,40,42].”
BackgroundMarine Collagen-Based Bioink for 3D Bioprinting of a Bilayered Skin Model
Cavallo, A., Kayal, T. A., Mero, A., Mezzetta, A., Pisani, A., Foffa, I., Vecoli, C., Buscemi, M., Guazzelli, L., Soldani, G., et al. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15051331 · Cited by 47
“The spreading ratio (SR) is calculated as the ratio between the extruded filament width and the nozzle diameter while the shape fidelity (Pr) according to the following equation [27]: Figure 2.”
MethodAli, A. S. M., Wu, D., Bannach‐Brown, A., Dhamrait, D., Berg, J., Tolksdorf, B., Lichtenstein, D., Dressler, C., Braeuning, A., Kurreck, J., et al. (2024) · Materials Today Bio · doi:10.1016/j.mtbio.2024.100991 · Cited by 49
Wang, H., Yang, L., Yang, Y., Zhang, D., & Hao, G. (2025) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2025.123458 · Cited by 47
Recent advances on injectable nanocomposite hydrogels towards bone tissue rehabilitation
Phogat, K., Ghosh, S. B., & Bandyopadhyay‐Ghosh, S. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.53362 · Cited by 44
Flow and assembly of cellulose nanocrystals (CNC): A bottom-up perspective - A review
Moud, A. A., & Moud, A. A. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123391 · Cited by 47
Current advancements in bio-ink technology for cartilage and bone tissue engineering
Badhe, R. V., Chatterjee, A., Bijukumar, D. R., & Mathew, M. T. (2023) · Bone · doi:10.1016/j.bone.2023.116746 · Cited by 47
Hao, L., Zhao, S., Hao, S., He, Y., Feng, M., Zhou, K., He, Y., Yang, J., Mao, H., & Gu, Z. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.124364 · Cited by 44
3D bioprinting of microorganisms: principles and applications
Herzog, J., Franke, L. A., Lai, Y., Rossi, P. G., Sachtleben, J., & Weuster‐Botz, D. (2024) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-023-02965-3 · Cited by 50
“Also, the bioprinting application has an impact on what biomaterials work best for the printing process [6, 74].”
BackgroundBhar, B., Das, E., Manikumar, K., & Mandal, B. B. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202303312 · Cited by 47
Sarah, R., Schimmelpfennig, K., Rohauer, R., Lewis, C. L., Limon, S., & Habib, A. (2025) · Gels · doi:10.3390/gels11010045 · Cited by 52
Ning, L., Zhu, N., Smith, A., Rajaram, A., Hou, H., Srinivasan, S., Mohabatpour, F., He, L., Mclnnes, A., Serpooshan, V., et al. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c02297 · Cited by 49
Biologically Enhanced Starch Bio‐Ink for Promoting 3D Cell Growth
Zhuang, P., Greenberg, Z., & He, M. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202100551 · Cited by 44
Karamchand, L., Makeiff, D., Gao, Y., Azyat, K., Serpe, M. J., & Kulka, M. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00255 · Cited by 48
The fabrication of the chitosan-based bioink for in vitro tissue repair and regeneration: A review
Zhang, X., Feng, C., Islam, M. R., & Li, H. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.128504 · Cited by 48
Dai, Y., Wang, P., Mishra, A., You, K., Zong, Y., Lu, W. F., Chow, E. K., Preshaw, P. M., Huang, D., Chew, R. J. J., et al. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202402727 · Cited by 54
Ng, P., Pinho, A. R., Gomes, M. C., Demidov, Y., Krakor, E., Grumme, D., Herb, M., Lê, K., Mano, J. F., Mathur, S., et al. (2022) · Macromolecular Bioscience · doi:10.1002/mabi.202100442 · Cited by 48
Amirian, J., Wychowaniec, J. K., Zendehdel, E. A., Sharma, G., Brangule, A., & Bandere, D. (2023) · Biomacromolecules · doi:10.1021/acs.biomac.3c00098 · Cited by 42
Ghosh, S., & Pati, F. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.127410 · Cited by 45
Silk fibroin-based inks for in situ 3D printing using a double crosslinking process
Agostinacchio, F., Fitzpatrick, V., Dirè, S., Kaplan, D. L., & Motta, A. (2024) · Bioactive Materials · doi:10.1016/j.bioactmat.2024.01.015 · Cited by 58
Ribezzi, D., Zegwaart, J., Gansbeke, T. V., Tejo‐Otero, A., Florczak, S., Aerts, J., Delrot, P., Hierholzer, A., Fussenegger, M., Malda, J., et al. (2025) · Advanced Materials · doi:10.1002/adma.202409355 · Cited by 42
Self-citationBioprinting of Matrigel Scaffolds for Cancer Research
Stefano, P. D., Vangosa, F. B., Bianchi, E., Pellegata, A. F., de Hartungen, A. H., Corti, P., & Dubini, G. (2021) · Polymers · doi:10.3390/polym13122026 · Cited by 45
“It gives an indication of the ink stabilization after dispensing and can provide an estimation of the shape fidelity in the x–y plane [23].”
BackgroundInfluentialElastin-like Polypeptide-Based Bioink: A Promising Alternative for 3D Bioprinting
Dai, M., Belaïdi, J.-P., Fleury, G., Garanger, É., Rielland, M., Schultze, X., & Lecommandoux, S. (2021) · Biomacromolecules · doi:10.1021/acs.biomac.1c00861 · Cited by 43
Luo, Y., Chen, B., Zhang, X., Huang, S., & Wa, Q. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.01.096 · Cited by 42
Coşkun, S., Akbulut, S. O., Sarıkaya, B., Çakmak, S., & Gümüşderelíoğlu, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.09.078 · Cited by 43
Patel, D. K., Patil, T. V., Ganguly, K., Dutta, S. D., & Lim, K. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.120963 · Cited by 41
3D Bioprinting as a Powerful Technique for Recreating the Tumor Microenvironment
Parodi, I., Lisa, D. D., Pastorino, L., Scaglione, S., & Fato, M. (2023) · Gels · doi:10.3390/gels9060482 · Cited by 44
“Printability, or specifically bioprintability, depends on the rhe logical propert es of th polymeric hydrogel-based bi ink and the presence of cells [44].”
BackgroundAmini, M., Hosseini, H., Dutta, S., Wuttke, S., Kamkar, M., & Arjmand, M. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c10596 · Cited by 41
Enhancing quality control in bioprinting through machine learning
Bonatti, A. F., Vozzi, G., & Maria, C. D. (2024) · Biofabrication · doi:10.1088/1758-5090/ad2189 · Cited by 47
“Biomaterials that present these properties might not be compatible with cells [31].”
Tyowua, A. T., Harbottle, D., & Binks, B. P. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103274 · Cited by 42
A multicellular bioprinted cell construct for vascularized bone tissue regeneration
Kim, W.-J., Lee, H., Roh, E. J., An, S. B., Han, I., & Kim, G. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.133882 · Cited by 41
Budharaju, H., Sundaramurthi, D., & Sethuraman, S. (2023) · Biomaterials Advances · doi:10.1016/j.bioadv.2023.213486 · Cited by 41
In vitro functional models for human liver diseases and drug screening: beyond animal testing
Paradiso, A., Volpi, M., Rinoldi, C., Celikkin, N., Contessi Negrini, N., Bilgen, M., Dallera, G., Pierini, F., Costantini, M., Święszkowski, W., et al. (2023) · Biomaterials Science · doi:10.1039/d1bm01872h · Cited by 40
Fang, Y., Sun, W., Zhang, T., & Xiong, Z. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2021.121298 · Cited by 40
Unleashing the potential of 3D printing soft materials
Xu, S., Ahmed, S., Momin, M., Hossain, A., & Zhou, T. (2023) · Device · doi:10.1016/j.device.2023.100067 · Cited by 43
4D printing polymeric biomaterials for adaptive tissue regeneration
Wang, Z., Ma, D., Liu, J., Xu, S., Qiu, F., Hu, L., Liu, Y., Ke, C., & Ruan, C. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.01.033 · Cited by 68
Haider, M. S., Ahmad, T., Yang, M., Hu, C., Hahn, L., Stahlhut, P., Gröll, J., & Luxenhofer, R. (2021) · Gels · doi:10.3390/gels7030078 · Cited by 41
“The shape fidelity or print accuracy can generally be defined as the degree of dimensional faithfulness of the printed object in comparison to computer aided design [82] and in the case of pPrOzi100-b-pEtOx100 based hydrogels, the assessment was accomplished only qualitatively, by visual inspection.”
BackgroundLim, W., Shin, S. Y., Cha, J. M., & Bae, H. (2021) · Polymers · doi:10.3390/polym13111773 · Cited by 42
Review: 3D printing hydrogels for the fabrication of soilless cultivation substrates
Kalossaka, L. M., Sena, G., Barter, L. M. C., & Myant, C. (2021) · Applied Materials Today · doi:10.1016/j.apmt.2021.101088 · Cited by 46
Development of agarose–gelatin bioinks for extrusion-based bioprinting and cell encapsulation
Dravid, A., McCaughey‐Chapman, A., Raos, B. J., O’Carroll, S. J., Connor, B. J., & Svirskis, D. M. (2022) · Biomedical Materials · doi:10.1088/1748-605x/ac759f · Cited by 41
“The yield stress is evaluated during bioink development as an indicator for how well a material can counteract deformation from gravitational forces or surface tension, and retain shape after extrusion [37].”
Sayed, J. E., Khoonkari, M., Oggioni, M., Perrin, P., Sanson, N., Kamperman, M., & Włodarczyk‐Biegun, M. K. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202207816 · Cited by 40
Bari, E., Gravina, G. M. D., Scocozza, F., Perteghella, S., Frongia, B., Tengattini, S., Segale, L., Torre, M. L., & Conti, M. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15020383 · Cited by 41
“Firstly, various combinations of printing speed and pressure were tested using a trial-and-error approach, as described in [51,52], with the final selection of the best pairs of values reported in Table 5.”
MethodResultMei, N., Wu, Y., Chen, B., Tian, Z., Yu, X., Sui, B., Ding, T., & Liu, X. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.950970 · Cited by 41
Lee, S., Choi, G., Yang, Y. J., Joo, K. I., & Chi, H. J. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.120895 · Cited by 42
Puistola, P., Miettinen, S., Skottman, H., & Mörö, A. (2023) · Materials Today Bio · doi:10.1016/j.mtbio.2023.100924 · Cited by 41
“This bioink demonstrated shear-thinning properties also with cells which is important in extrusion-based bioprinting to reduce shear stress and prevent cell death [45].”
BackgroundInfluentialLiu, H., Xing, F., Yu, P., Zhe, M., Duan, X., Liu, M., Xiang, Z., & Ritz, U. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.131623 · Cited by 46
Wang, J., Wang, Y., Wang, R., Wang, Q., Wen, M., Wang, J., Sheng, L., Zheng, Y., & Xi, T. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202400620 · Cited by 45
Gerdes, S., Ramesh, S., Mostafavi, A., Tamayol, A., Rivero, I. V., & Rao, P. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00598 · Cited by 43
Combined effects of NaOH, NaCl, and heat on the gel characteristics of duck egg white
Han, T., Xue, H., Hu, X., Li, R., Liu, H., Tu, Y., & Zhao, Y. (2022) · LWT · doi:10.1016/j.lwt.2022.113178 · Cited by 39
Geevarghese, R., Somasekharan, L. T., Bhatt, A., Kasoju, N., & Nair, R. P. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.02.191 · Cited by 41
Briede, S., Jurinovs, M., Nechausov, S. S., Platnieks, O., & Gaidukovs, S. (2022) · Molecular Systems Design & Engineering · doi:10.1039/d2me00085g · Cited by 39
Yang, G. H., Kang, D., An, S., Ryu, J. Y., Lee, K., Kim, J. S., Song, M.-Y., Kim, Y.-S., Kwon, S., Jung, W., et al. (2022) · Biomaterials Research · doi:10.1186/s40824-022-00321-2 · Cited by 41
“This property is known as the viscoelasticity which can be determined using the storage modulus (G′) and the loss modulus (G′′) [95].”
BackgroundYang, J., Li, Z., Li, S., Zhang, Q., Zhou, X., & He, C. (2023) · Biomaterials Science · doi:10.1039/d2bm01978g · Cited by 40
Minimally invasive bioprinting for in situ liver regeneration
Yang, Y., Yu, Z., Lu, X., Dai, J., Zhou, C., Yan, J., Wang, L., Wang, Z., & Zang, J. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.03.011 · Cited by 36
3D bioprinting of tyramine modified hydrogels under visible light for osteochondral interface
Şentürk, E., Bilici, Ç., Afghah, F., Khan, Z., Çelik, S., Wu, C., & Koç, B. (2023) · Biofabrication · doi:10.1088/1758-5090/acd6bf · Cited by 40
“In general, shape fidelity refers to a bioink’s ability to retain its shape during and after deposition [61].”
BackgroundSawdust-derived cellulose nanofibrils with high biosafety for potential bioprinting
Jiao, H., Shi, Y., Sun, J., Lu, X., Zhang, H., Li, Y., Fu, Y., Guo, J., Wang, Q., Liu, H., et al. (2024) · Industrial Crops and Products · doi:10.1016/j.indcrop.2024.118025 · Cited by 38
Wang, X., Wang, M., Xu, Y., Yin, J., & Hu, J. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.131980 · Cited by 46
Engineering considerations in the design of tissue specific bioink for 3D bioprinting applications
Tripathi, S., Dash, M., Chakraborty, R., Junaedi, H., Kumar, P., Hassan, S., Mehboob, H., Singh, H., & Nanda, H. S. (2025) · Biomaterials Science · doi:10.1039/d4bm01192a · Cited by 40
Self-assembly of Pluronics: A critical review and relevant applications
Spirito, N. A. D., Grizzuti, N., & Pasquino, R. (2024) · Physics of Fluids · doi:10.1063/5.0238690 · Cited by 42
3D Printing of Hydrogel Polysaccharides for Biomedical Applications: A Review
Aghajani, M., Garshasbi, H. R., Naghib, S. M., & Mozafari, M. R. (2025) · Biomedicines · doi:10.3390/biomedicines13030731 · Cited by 41
The Importance of Interfaces in Multi‐Material Biofabricated Tissue Structures
Viola, M., Piluso, S., Gröll, J., Vermonden, T., Malda, J., & Castilho, M. D. (2021) · Advanced Healthcare Materials · doi:10.1002/adhm.202101021 · Cited by 42
Self-citationAdvantage of Alginate Bioinks in Biofabrication for Various Tissue Engineering Applications
Datta, S. (2023) · International Journal of Polymer Science · doi:10.1155/2023/6661452 · Cited by 41
4D printing of pH-responsive bilayer with programmable shape-shifting behaviour
Parimita, S., Kumar, A., Hariharan, K., & Ghosh, P. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.113581 · Cited by 41
Agarose Hydrogels for Bone Tissue Engineering, from Injectables to Bioprinting
Huang, Y., Peng, S., Chen, Y., & Chu, B. (2025) · Gels · doi:10.3390/gels11040255 · Cited by 38
“It involves a number of key factors including viscosity, shear thinning, yield stress, elastic recovery, cell loading, and cross-linking properties [97].”
Gupta, D., Derman, İ. D., Xu, C., Huang, Y. H., & Ozbolat, I. T. (2025) · Nature Reviews Methods Primers · doi:10.1038/s43586-025-00394-y · Cited by 46
“These attributes make MVB compatible with a wide range of bioink viscosities (1–70 mPa s), including shear-thinning and shear-thickening materials often used in tissue engineering applications 58–60 .”
Machine Learning in Predicting and Optimizing Polymer Printability for 3D Bioprinting
Yu, J., Yao, D., Wang, L., & Xu, M. (2025) · Polymers · doi:10.3390/polym17131873 · Cited by 39
Baier, R. V., Raggio, J. I. C., Giovanetti, C. M., Palza, H., Burda, I., Terrasi, G. P., Weisse, B., Siqueira, G. D. F., Nyström, G., Vivanco, J. F., et al. (2021) · Biomaterials Advances · doi:10.1016/j.msec.2021.112540 · Cited by 39
Distinctive rheological properties of Pickering emulsions: from their origin to the applications
Lee, E., Kim, D., & Kim, K. (2022) · Korea-Australia Rheology Journal · doi:10.1007/s13367-022-00018-x · Cited by 37
“Thus, a considerably high-yield stress can minimize the destruction of the internal structures of the ink during the extrusion process, and this thus enables to achieve the high shape fidelity of the ink [92].”
BackgroundLiu, S., Kilian, D., Ahlfeld, T., Hu, Q., & Gelinsky, M. (2023) · Biofabrication · doi:10.1088/1758-5090/acb8dc · Cited by 41
“However, for achieving a high shape fidelity, the ability to print structures with transversal porosity is important and therefore investigating the filament collapse along the vertical direction due to the effect of gravity is imperative, especially when a filament is spanning over a large gap between underlying supp…”
BackgroundInfluential3D Printability of Silk/Hydroxyapatite Composites for Microprosthetic Applications
Milazzo, M., Fitzpatrick, V., Owens, C. E., Carraretto, I. M., McKinley, G. H., Kaplan, D. L., & Buehler, M. J. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c01357 · Cited by 37
Tan, X. H., Liu, L., Mitryashkin, A., Wang, Y., & Goh, J. C. H. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c00313 · Cited by 36
Qiu, Z., Zhu, H., Wang, Y., Kasimu, A., Li, D., & He, J. (2023) · Bio-Design and Manufacturing · doi:10.1007/s42242-022-00225-z · Cited by 36
“However, the overly large shear force applied on hydrogel struts during the extrusion process would cause cell death directly and has become the main critical issue of the extrusion bioprinting technique [47].”
BackgroundGarces, D. G., Strauß, S., Gretzinger, S., Schmieg, B., Jüngst, T., Gröll, J., Meinel, L., Schmidt, I., Hartmann, H., Schenke‐Layland, K., et al. (2023) · Biofabrication · doi:10.1088/1758-5090/acfe3b · Cited by 48
“The filament fusion test evaluates the printer’s ability to deposit filaments meander-like at different distances, which can be used to determine the accuracy of the print test [17, 18].”
BackgroundKumari, S., Mondal, P., Tyeb, S., & Chatterjee, K. (2024) · Journal of Materials Chemistry B · doi:10.1039/d3tb02179c · Cited by 39
Yang, X., Yao, L., Sun, X., Wang, L., & Xiao, J. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.155650 · Cited by 38
Artificial Intelligence tool for prediction of ECM mimics hydrogel formulations via click chemistry
Cadamuro, F., Piazzoni, M., Gamba, E., Sonzogni, B., Previdi, F., Nicotra, F., Ferramosca, A., & Russo, L. (2025) · Biomaterials Advances · doi:10.1016/j.bioadv.2025.214323 · Cited by 37
Ullah, M. W., Ul‐Islam, M., Shehzad, A., Manan, S., Islam, S. U., Fatima, A., Al‐Saidi, A. K., Nokab, M. E. H. E., Sanchez, J. Q., & Sebakhy, K. O. (2025) · Macromolecular Materials and Engineering · doi:10.1002/mame.202500251 · Cited by 39
“Cell density plays a critical role in the structural integrity and functionality of printed constructs [176].”
Engineering a Chemically Defined Hydrogel Bioink for Direct Bioprinting of Microvasculature
Barrs, R. W., Jia, J., Ward, M., Richards, D., Yao, H., Yost, M. J., & Mei, Y. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c00947 · Cited by 36
Falcone, G., Saviano, M., Aquino, R. P., Gaudio, P. D., & Russo, P. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117791 · Cited by 36
3D Bioprinting of Nature-Inspired Hydrogel Inks Based on Synthetic Polymers
Kumar, S., Tharayil, A., & Thomas, S. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00567 · Cited by 38
Ramakrishnan, R., Kasoju, N., Raju, R., Geevarghese, R., Gauthaman, A., & Bhatt, A. (2022) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2022.100184 · Cited by 47
Development of 3D printable graphene oxide based bio-ink for cell support and tissue engineering
Li, J., Liu, X., Crook, J. M., & Wallace, G. G. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.994776 · Cited by 44
“Specifically, storage modulus (G`) refers to the elastic properties, serving as a measure of elastic shape retention, while loss modulus (G``) refers to the viscous properties, serving as a measure of flowability (Schwab et al., 2020).”
BackgroundExtrusion-based sustainable 3D bioprinting of meat & its analogues: A review
Tibrewal, K., Dandekar, P. P., & Jain, R. D. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00256 · Cited by 39
Jongprasitkul, H., Turunen, S., Parihar, V. S., & Kellomäki, M. (2022) · Biomacromolecules · doi:10.1021/acs.biomac.2c01418 · Cited by 37
3D-Printing of Silk Nanofibrils Reinforced Alginate for Soft Tissue Engineering
Mohammadpour, Z., Kharaziha, M., & Zarrabi, A. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15030763 · Cited by 37
“Extrusion-based bioprinting is one of the interesting explored techniques that extrudes continuous fibers to form 3D scaffolds [7].”
Background
Metadata
- Authors
- Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J.
- Affiliations
- AO Foundation (CH)
- Utrecht University (NL)
- Corresponding author
- Malda, Jos
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-08-28
- Volume
- 120
- Issue
- 19
- Pages
- 10850-10877
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- PMC
- PMC7564085
- OpenAlex
- W3082213210
- Cited by
- 1,359
- References
- 287
- Citations by year
- 2026: 305 · 2025: 283 · 2024: 280 · 2023: 202 · 2022: 176 · 2021: 107 · 2020: 6
- FWCI
- 10.29
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Chemical Reviews (publishedVersion, cc-by-nc-nd)
- PubMed Central (publishedVersion)
- PubMed (publishedVersion)
- University of Twente Research Information (publishedVersion, cc-by-nc-nd)
- HAL (submittedVersion)
- Utrecht University Repository (Utrecht University) (submittedVersion, other-oa)
- University of Twente Research Information (submittedVersion, cc-by-nc-nd)
- Funders
- AO Foundation (3D OC)
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek (024.003.013)
- ReumaNederland (LLP12, LLP22)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Keywords
- bioinks, 3D bioprinting, printability, shape fidelity, hydrogels, extrusion-based bioprinting, rheology, physicochemical parameters, prediction model
- MeSH terms
- Humans, Ink, Tissue Engineering, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.