Printability and Shape Fidelity of Bioinks in 3D Bioprinting
Open accessThe DOI matches its Crossref record; 285 of the 287 references it cites were found in a registry or an index.
Abstract
Three-dimensional bioprinting uses additive manufacturing techniques for the automated fabrication of hierarchically organized living constructs. The building blocks are often hydrogel-based bioinks, which need to be printed into structures with high shape fidelity to the intended computer-aided design. For optimal cell performance, relatively soft and printable inks are preferred, although these undergo significant deformation during the printing process, which may impair shape fidelity. While the concept of good or poor printability seems rather intuitive, its quantitative definition lacks consensus and depends on multiple rheological and chemical parameters of the ink. This review discusses qualitative and quantitative methodologies to evaluate printability of bioinks for extrusion- and lithography-based bioprinting. The physicochemical parameters influencing shape fidelity are discussed, together with their importance in establishing new models, predictive tools and printing methods that are deemed instrumental for the design of next-generation bioinks, and for reproducible comparison of their structural performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures














Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“To this end, considerable efforts were made in developing hydrogel-based inks or printing techniques to enhance 3D stability and shape fidelity, such as printing multimaterial inks with combined nozzle system24, 25, photo-crosslinkable hydrogels17, 26, 27, adding viscosifiers28–30, or printing in sacrificial supporting materials31–33.”
From Fibre-infused gel scaffolds guide cardiomyocyte alignment in 3D-printed ventricles (2023) · cites this paper as [30]
The cited source says what the claim attributes to it.
In the citing paper
“However, the successful fabrication of stable 3D constructs relies on hydrogels with optimized rheological behavior, structural stability, and physicochemical properties that ensure printability and shape fidelity [7,8,9].”
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Self-citationHinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Fibrinogen and fibrin structure and functions
MOSESSON, M. W. (2005) · Journal of Thrombosis and Haemostasis · doi:10.1111/j.1538-7836.2005.01365.x · Cited by 1,695
Bioinks for 3D bioprinting: an overview
Gungor-Ozkerim, P. S., Inci, I., Zhang, Y. S., Khademhosseini, A., & Dokmeci, M. R. (2018) · Biomaterials Science · doi:10.1039/c7bm00765e · Cited by 1,428
Multivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Research works printed but not linked: 5
- (126) Chimene, D.; Kaunas, R.; Gaharwar, A. K. Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies. Adv. Mater. 2020 , 32 , 1902026. - · DOI · Paper page
- (129) Mezger, T. G. The Rheology Handbook , 3rd revised ed.; Vincentz Network, 2011. -
- (156) Petta, D.; Grijpma, D. W.; Alini, M.; Eglin, D.; D ' Este, M. Three-Dimensional Printing of a Tyramine Hyaluronan Derivative with Double Gelation Mechanism for Independent Tuning of Shear Thinning and Postprinting Curing. ACS Biomater. Sci. Eng. 2018 , 4 , 3088 -3098. - · DOI
- (161) Kiyotake, E. A.; Douglas, A. W.; Thomas, E. E.; Nimmo, S. L.; Detamore, M. S. Development and Quantitative Characterization of the Precursor Rheology of Hyaluronic Acid Hydrogels for Bioprinting. Acta Biomater. 2019 , 95 , 176. - · DOI · Paper page
- (245) ASTM52900-15, I. ; ASTM International: West Conshohocken, PA, 2015. -
Cited by
Items 101–200 of 1,001
Development of hydroxyapatite reinforced alginate–chitosan based printable biomaterial-ink
Adhikari, J., Perwez, M. S., Das, A., & Saha, P. (2020) · Nano-Structures & Nano-Objects · doi:10.1016/j.nanoso.2020.100630 · Cited by 95
Blanco‐Fernandez, B., Rey-Viñolas, S., Bağcı, G., Rubí-Sans, G., Otero, J., Navajas, D., Pérez‐Amodio, S., & Engel, E. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c00920 · Cited by 88
Ataie, Z., Kheirabadi, S., Zhang, J. W., Kedzierski, A., Petrosky, C., Jiang, R., Vollberg, C., & Sheikhi, A. (2022) · Small · doi:10.1002/smll.202202390 · Cited by 93
Dental Materials Applied to 3D and 4D Printing Technologies: A Review
Cai, H., Xu, X., Lu, X., Zhao, M., Jia, Q., Jiang, H. B., & Kwon, J. (2023) · Polymers · doi:10.3390/polym15102405 · Cited by 95
3D Bioprinting of Lignocellulosic Biomaterials
Shavandi, A., Hosseini, S., Okoro, O. V., Nie, L., Babadi, F. E., & Melchels, F. P. W. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202001472 · Cited by 89
PNIPAM/PEDOT:PSS Hydrogels for Multifunctional Organic Electrochemical Transistors
Lopez‐Larrea, N., Wustoni, S., Peñas, M. I., Uribe, J., Dominguez‐Alfaro, A., Gallastegui, A., Inal, S., & Mecerreyes, D. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202403708 · Cited by 86
Walsh, C. M., Wychowaniec, J. K., Brougham, D. F., & Dooley, D. (2021) · Pharmacology & Therapeutics · doi:10.1016/j.pharmthera.2021.108043 · Cited by 85
Integration of Extracellular Matrices into Organ‐on‐Chip Systems
Kutluk, H., Bastounis, E. E., & Constantinou, I. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202203256 · Cited by 84
Erfanian, E., Moaref, R., Ajdary, R., Tam, K. C., Rojas, O. J., Kamkar, M., & Sundararaj, U. (2023) · Carbon · doi:10.1016/j.carbon.2023.118037 · Cited by 82
Texture-modified soy protein foods: 3D printing design and red cabbage effect
Carranza, T., Guerrero, P., de la Caba, K., & Etxabide, A. (2023) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2023.109141 · Cited by 85
Scaffold Guided Bone Regeneration for the Treatment of Large Segmental Defects in Long Bones
Schulze, F., Lang, A., Schoon, J., Wassilew, G. I., & Reichert, J. C. (2023) · Biomedicines · doi:10.3390/biomedicines11020325 · Cited by 87
Wang, X., Xie, A., Cao, P., Yang, J., Ong, W. L., Zhang, K., & Ho, G. W. (2024) · Advanced Materials · doi:10.1002/adma.202309952 · Cited by 92
Dutta, S. D., Ganguly, K., Jeong, M.-S., Patel, D. K., Patil, T. V., Cho, S., & Lim, K. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c10620 · Cited by 80
Ma, Y., Schutyser, M. A. I., Boom, R. M., & Zhang, L. (2021) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2021.102764 · Cited by 84
Visible Light-Based 4D-Bioprinted Tissue Scaffold
Gugulothu, S. B., & Chatterjee, K. (2023) · ACS Macro Letters · doi:10.1021/acsmacrolett.3c00036 · Cited by 77
Hydrogels for 3D embedded bioprinting: a focused review on bioinks and support baths
Zhou, K., Sun, Y., Yang, J., Mao, H., & Gu, Z. (2022) · Journal of Materials Chemistry B · doi:10.1039/d1tb02554f · Cited by 82
A Deep Learning Quality Control Loop of the Extrusion-based Bioprinting Process
Bonatti, A. F., Vozzi, G., Chua, C. K., & Maria, C. D. (2022) · International Journal of Bioprinting · doi:10.18063/ijb.v8i4.620 · Cited by 82
“308 International Journal of Bioprinting (2022)–Volume 8, Issue 4 aspects of the EBB process, including material, scaffold geometry, and printing apparatus that determines a priori if the printing process will be successful or not)[7-9].”
BackgroundRecent advances in bioprinting using silk protein-based bioinks
Chakraborty, J., Mu, X., Pramanick, A., Kaplan, D. L., & Ghosh, S. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121672 · Cited by 78
The role of hydrocolloids on the 3D printability of meat products
Dick, A., Dong, X., Bhandari, B., & Prakash, S. (2021) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2021.106879 · Cited by 77
3D printing of inorganic-biopolymer composites for bone regeneration
van der Heide, D., Cidonio, G., Stoddart, M. J., & D’Este, M. (2022) · Biofabrication · doi:10.1088/1758-5090/ac8cb2 · Cited by 82
“Due to that printability is evaluated in a different manner in reported studies and often the measurements are not quantitative, comparing between different papers is difficult [164].”
BackgroundSelf-citationDesign and engineering of organ-on-a-chip
Cho, S., Lee, S., & Ahn, S. I. (2023) · Biomedical Engineering Letters · doi:10.1007/s13534-022-00258-4 · Cited by 78
Meniscus regeneration by 3D printing technologies: Current advances and future perspectives
Stocco, E., Porzionato, A., Rose, E. D., Barbon, S., De, R., & Macchi, V. (2022) · Journal of Tissue Engineering · doi:10.1177/20417314211065860 · Cited by 78
Design for Additive Manufacturing: Recent Innovations and Future Directions
Egan, P. (2023) · Designs · doi:10.3390/designs7040083 · Cited by 83
“Common biomaterials for bioprinting include polycaprolactone (PCL), tricalcium phosphate (TCP), and alginate [39].”
BackgroundMultilayer 3D bioprinting and complex mechanical properties of alginate-gelatin mesostructures
Soufivand, A. A., Faber, J., Hinrichsen, J., & Budday, S. (2023) · Scientific Reports · doi:10.1038/s41598-023-38323-2 · Cited by 82
Li, J., Moeinzadeh, S., Kim, C., Pan, C., Weale, G., Kim, S., Abrams, G. D., James, A. W., Choo, H., Chan, C., et al. (2022) · Biomaterials · doi:10.1016/j.biomaterials.2022.121969 · Cited by 78
Park, W., Gao, G., & Cho, D. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22157837 · Cited by 75
“Achieving satisfactory printability is highly dependent on the properties of applied bioinks, bioprinter configurations, and biofabrication strategies [74,75].”
BackgroundAdvances in 3D bioprinting technology for functional corneal reconstruction and regeneration
Jia, S., Bu, Y., Lau, D. S. A., Lin, Z., Sun, T., Lu, W. W., Sheng, L., Ruan, C., & Chan, C.-H. J. (2023) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.1065460 · Cited by 77
“Nevertheless, the conventional extrusion bioprinter is still preferred by many researchers (Schwab et al., 2020).”
BackgroundHigh-resolution projection-based 3D bioprinting
He, C., Qiao, T., Wang, G.-H., Sun, Y., & He, Y. (2024) · Nature Reviews Bioengineering · doi:10.1038/s44222-024-00218-w · Cited by 92
“Thus, inks in bioprinting often contain a biocompatible material (usually photo-curable hydrogels 20,71,72 ), a photoinitiator, photoabsorber, bioactive ingredients and/or cells.”
Collagen as a bio-ink for 3D printing: a critical review
Debnath, S., Agrawal, A., Jain, N., Chatterjee, K., & Player, D. J. (2025) · Journal of Materials Chemistry B · doi:10.1039/d4tb01060d · Cited by 81
Recent advances and applications of artificial intelligence in 3D bioprinting
Chen, H., Zhang, B., & Huang, J. (2024) · Biophysics Reviews · doi:10.1063/5.0190208 · Cited by 83
Agrawal, R., & García‐Tuñón, E. (2024) · Soft Matter · doi:10.1039/d4sm00758a · Cited by 72
Current Trends on Protein Driven Bioinks for 3D Printing
Veiga, A., Silva, I. V., Duarte, M. M., & Oliveira, A. L. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13091444 · Cited by 73
Li, Y., Liu, W., Li, S., Zhang, M., Yang, F., & Wang, S. (2021) · Journal of Future Foods · doi:10.1016/j.jfutfo.2021.09.005 · Cited by 70
Jongprasitkul, H., Turunen, S., Parihar, V. S., & Kellomäki, M. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00185 · Cited by 72
3D printing of living structural biocomposites
Hirsch, M., Lucherini, L., Zhao, R., Saracho, A. C., & Amstad, E. (2023) · Materials Today · doi:10.1016/j.mattod.2023.02.001 · Cited by 70
Gogoi, D., Kumar, M., & Singh, J. (2024) · Annals of 3D Printed Medicine · doi:10.1016/j.stlm.2024.100159 · Cited by 80
Biomechanical factors in three-dimensional tissue bioprinting
Ning, L., Gil, C. J., Hwang, B., Theus, A. S., Perez, L., Tomov, M. L., Bauser‐Heaton, H. D., & Serpooshan, V. (2020) · Applied Physics Reviews · doi:10.1063/5.0023206 · Cited by 69
Masri, S., & Fauzi, M. B. (2021) · Polymers · doi:10.3390/polym13071011 · Cited by 71
Three-Dimensional Printing Applications in Food Industry
Leontiou, A., Georgopoulos, S., Karabagias, V., Kehayias, G., Karakassides, A., Salmas, C., & Giannakas, A. (2023) · Nanomanufacturing · doi:10.3390/nanomanufacturing3010006 · Cited by 66
“In extrusion-based 3D printing, the ability of the material to be squeezed out of the nozzle in a continuous manner (called extrudability) and the stability of the printed shape are the two main concerns [33].”
BackgroundPhoto-cross-linkable hyaluronic acid bioinks for bone and cartilage tissue engineering applications
Ghorbani, F., Ghalandari, B., Khajehmohammadi, M., Bakhtiary, N., Tolabi, H., Sahranavard, M., Fathi‐karkan, S., Nazar, V., Niar, S. H. N., Armoon, A., et al. (2023) · International Materials Reviews · doi:10.1080/09506608.2023.2167559 · Cited by 68
Wang, J., Cui, Z., & Maniruzzaman, M. (2023) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2023.123020 · Cited by 72
Gillispie, G. J., Copus, J. S., Uzun‐Per, M., Yoo, J. J., Atala, A., Niazi, M. K. K., & Lee, S. J. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.112237 · Cited by 70
“Printability refers to the performance of a bioink, specifically during the printing process [4,7].”
BackgroundWychowaniec, J. K., & Brougham, D. F. (2022) · Advanced Science · doi:10.1002/advs.202202278 · Cited by 68
Nanofibrillated cellulose/gellan gum hydrogel-based bioinks for 3D bioprinting of skin cells
Lameirinhas, N. S., Teixeira, M. C., Carvalho, J. P. F., Valente, B. F. A., Pinto, R. J. B., Oliveira, H., Luís, J. L., Pires, L. S. O., Oliveira, J. M., Vilela, C., et al. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.12.227 · Cited by 65
Tunable Microgel‐Templated Porogel (MTP) Bioink for 3D Bioprinting Applications
Ouyang, L., Wojciechowski, J. P., Tang, J., Guo, Y., & Stevens, M. M. (2022) · Advanced Healthcare Materials · doi:10.1002/adhm.202200027 · Cited by 71
Smart biomaterials: From 3D printing to 4D bioprinting
Amukarimi, S., Rezvani, Z., Eghtesadi, N., & Mozafari, M. (2022) · Methods · doi:10.1016/j.ymeth.2022.07.006 · Cited by 69
In vivo bioprinting: Broadening the therapeutic horizon for tissue injuries
Zhao, W., Hu, C., & Xu, T. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.01.018 · Cited by 76
“Research into the regulation of the printability and tissue adhesion of bioinks that serves in vivo bioprinting is currently being investigated [72,201].”
BackgroundAdvanced strategies in the application of gelatin-based bioink for extrusion bioprinting
Yang, J., He, H., Li, D., Zhang, Q., Xu, L., & Ruan, C. (2023) · Bio-Design and Manufacturing · doi:10.1007/s42242-023-00236-4 · Cited by 66
3D bioprinting for organ and organoid models and disease modeling
Juraski, A. D. C., Sharma, S., Sparanese, S., da Silva, V. A., Wong, J., Laksman, Z., Flannigan, R. K., Rohani, L., & Willerth, S. M. (2023) · Expert Opinion on Drug Discovery · doi:10.1080/17460441.2023.2234280 · Cited by 72
“The printability of an ink and its ability to maintain the desired shape post-printing are crucial considerations when designing and manufacturing a bioink [11].”
BackgroundGarcia-Cruz, M. R., Postma, A., Frith, J. E., & Meagher, L. (2021) · Biofabrication · doi:10.1088/1758-5090/abec2d · Cited by 67
“Similar methods of filament uniformity assessment for hydrogels printability evaluation have been used in the literature as reviewed by Schwab et al [42].”
Ning, L., Shim, J., Tomov, M. L., Liu, R., Mehta, R., Mingee, A., Hwang, B., Jin, L., Mantalaris, A., Xu, C., et al. (2022) · Advanced Science · doi:10.1002/advs.202200244 · Cited by 67
Moor, L. D., Smet, J., Plovyt, M., Bekaert, B., Vercruysse, C., Asadian, M., Geyter, N. D., Vlierberghe, S. V., Dubruel, P., & Declercq, H. (2021) · Biofabrication · doi:10.1088/1758-5090/ac24de · Cited by 64
“Organized layer-by-layer biofabrication of vascularized tissues can be achieved by 3D bioprinting, which is an additive manufacturing process allowing precise control and spatial arrangement of the cellular building blocks combined with biomaterials [12, 13].”
Biofabricating the vascular tree in engineered bone tissue
de Silva, L. S., Bernal, P. N., Rosenberg, A. J. W. P., Malda, J., Levato, R., & Gawlitta, D. (2022) · Acta Biomaterialia · doi:10.1016/j.actbio.2022.08.051 · Cited by 64
Self-citationAlhembar, A., Sheikh-Ahmad, J. Y., Jarrar, F. S., & Bojanampati, S. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.12.024 · Cited by 61
Progress in Organ Bioprinting for Regenerative Medicine
Wang, X. S., Zhang, D., Singh, Y. P., Yeo, M., Deng, G., Lai, J., Chen, F., Ozbolat, I. T., & Yu, Y. (2024) · Engineering · doi:10.1016/j.eng.2024.04.023 · Cited by 69
“The technologies of 3D bioprinting are classified into inkjet [16], extrusion [17,18], and vat photopolymerization-based bioprinting [19,20], depending on the method employed for dispensing bioinks.”
Zhang, Y., Raza, A., Xue, Y., Yang, G., Hayat, U., Yu, J., Liu, C., Wang, H., & Wang, J. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.11.009 · Cited by 60
Digital Light Processing 3D Bioprinting of Gelatin‐Norbornene Hydrogel for Enhanced Vascularization
Duong, V. T., & Lin, C. (2023) · Macromolecular Bioscience · doi:10.1002/mabi.202300213 · Cited by 61
Double network laminarin-boronic/alginate dynamic bioink for 3D bioprinting cell-laden constructs
Amaral, A. J. R., Gaspar, V. M., Lavrador, P., & Mano, J. F. (2021) · Biofabrication · doi:10.1088/1758-5090/abfd79 · Cited by 59
“…the minimum biopolymer content, at which consistent and continuous filaments could be formed (at the tip of the nozzle), in a reproducible and controlled mode, maintaining the predesigned shape from the instant immediately after extrusion until it is ionically cross-linked [12, 59] (figure 3(A)).”
Engineered organoids for biomedical applications
de Barros, N. R., Wang, C., Maity, S., Peirsman, A., Nasiri, R., Herland, A., Ermis, M., Kawakita, S., de Carvalho, B. G., Kouchehbaghi, N. H., et al. (2023) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2023.115142 · Cited by 63
Bioink: a 3D-bioprinting tool for anticancer drug discovery and cancer management
Pandey-Tiwari, A., Thorat, N. D., Pricl, S., Patil, R. M., Rohiwal, S. S., & Townley, H. E. (2021) · Drug Discovery Today · doi:10.1016/j.drudis.2021.03.010 · Cited by 61
Mu, R., de Souza, S. C., Liao, Z., Dong, L., & Wang, C. (2022) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2022.114298 · Cited by 59
Zhang, J., Wang, Y., Wei, Q., Wang, Y., Li, M., Li, D., & Zhang, L. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.08.175 · Cited by 58
Bioinspired Processing: Complex Coacervates as Versatile Inks for 3D Bioprinting
Khoonkari, M., Sayed, J. E., Oggioni, M., Amirsadeghi, A., Dijkstra, P., Parisi, D., Kruyt, F. A. E., van Rijn, P., Włodarczyk‐Biegun, M. K., & Kamperman, M. (2023) · Advanced Materials · doi:10.1002/adma.202210769 · Cited by 57
Monavari, M., Homaeigohar, S., Medhekar, R., Nawaz, Q., Monavari, M., Zheng, K., & Boccaccini, A. R. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c23252 · Cited by 57
Kim, J. J., & Cho, D. (2024) · Virtual and Physical Prototyping · doi:10.1080/17452759.2024.2395470 · Cited by 60
“Reversible bioinks are designed to undergo reversible physical or chemical changes, transitioning between liquid and gel states under specific conditions such as temperature, pH, or ionic strength changes [95].”
Mierke, C. T. (2024) · Cells · doi:10.3390/cells13191638 · Cited by 59
Characterization of Biocompatibility of Functional Bioinks for 3D Bioprinting
Kim, J. (2023) · Bioengineering · doi:10.3390/bioengineering10040457 · Cited by 62
Zarandona, I., Bengoechea, C., Álvarez‐Castillo, E., de la Caba, K., Guerrero, A. F., & Guerrero, P. (2021) · Gels · doi:10.3390/gels7040175 · Cited by 59
Randhawa, A., Dutta, S. D., Ganguly, K., Patel, D. K., Patil, T. V., & Lim, K. (2022) · Macromolecular Bioscience · doi:10.1002/mabi.202200278 · Cited by 58
Kim, D., Jo, S., Lee, D., Kim, S., Seok, J. M., Yeo, S. J., Lee, J. H., Lee, J., Lee, K., Kim, T., et al. (2023) · Biomaterials Research · doi:10.1186/s40824-023-00403-9 · Cited by 60
“When the hydrogel was extruded from the nozzle, its viscosity decreased with increasing shear stress, resulting in hydrogel formation [33].”
BackgroundSelf-Healing of Pluronic® F127 Hydrogels in the Presence of Various Polysaccharides
Lupu, A., Grădinaru, L. M., Rusu, D., & Bercea, M. (2023) · Gels · doi:10.3390/gels9090719 · Cited by 55
Hafeez, S., Aldana, A. A., Duimel, H., Ruiter, F. A. A., Decarli, M. C., LaPointe, V. L. S., van Blitterswijk, C., Moroni, L., & Baker, M. B. (2023) · Advanced Materials · doi:10.1002/adma.202207053 · Cited by 57
3D-bioprinting of self-healing hydrogels
Karvinen, J., & Kellomäki, M. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.112864 · Cited by 60
“In the case of EBB, print-ability refers to suitable extrudability, filament formation, and shape fidelity [38].”
BackgroundZhu, P., Chu, Y., Yang, J., & Chen, L. (2024) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2024.110391 · Cited by 58
Machine Learning in Gel-Based Additive Manufacturing: From Material Design to Process Optimization
Zhang, Z., Wang, Y., & Wang, W. (2025) · Gels · doi:10.3390/gels11080582 · Cited by 56
“Shear-thinning behavior, in which ink viscosity decreases with increasing stress, facilitates printing by reducing viscosity during extrusion without compromising cell viability [89].”
Terpstra, M. L., Li, J., Mensinga, A., de Ruijter, M., van Rijen, M. H. P., Androulidakis, C., Galiotis, C., Papantoniou, I., Matsusaki, M., Malda, J., et al. (2022) · Biofabrication · doi:10.1088/1758-5090/ac6282 · Cited by 58
Self-citationStructural and functional tailoring of interfacial solar evaporators using 3D printing
Zhang, X., Wang, J., Wang, X., Xu, Y., & Li, Y. (2025) · Materials Today · doi:10.1016/j.mattod.2025.01.011 · Cited by 55
Kim, D., Kim, M., Lee, J., & Jang, J. (2022) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2022.764682 · Cited by 64
“Appropriate extrudability, filament formation, and shape fidelity are all considered for printability evaluation (Schwab et al., 2020).”
BackgroundEffect of varying cell densities on the rheological properties of the bioink
Majumder, N., Mishra, A., & Ghosh, S. (2022) · Bioprinting · doi:10.1016/j.bprint.2022.e00241 · Cited by 52
“…for the above observation was given by Schwab et al. that the incorporated cells might interfere with the enzymatic crosslinking of the bioink by masking the active sites of the hydrogel or capturing the small molecule required for crosslinking initiation rendering it a weak gel character [53].”
BackgroundMethodInfluentialKumi, M., Ejeromedoghene, O., Sudane, W. D., & Zhang, Z. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.112906 · Cited by 55
Guida, L., Cavallaro, M., & Levi, M. (2024) · Bioprinting · doi:10.1016/j.bprint.2024.e00376 · Cited by 52
Multiple Crosslinking Hyaluronic Acid Hydrogels with Improved Strength and 3D Printability
Wan, T., Fan, P., Zhang, M., Shi, K., Chen, X. D., Yang, H., Liu, X., Xu, W., & Zhou, Y. (2021) · ACS Applied Bio Materials · doi:10.1021/acsabm.1c01141 · Cited by 52
Jeon, O., Lee, Y. B., Lee, S. J., Guliyeva, N., Lee, J., & Alsberg, E. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.11.025 · Cited by 58
Maillard, M., Chevalier, J., Grémillard, L., Baeza, G. P., Courtial, E., Marion, S., & Garnier, V. (2022) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2022.12.008 · Cited by 55
3D Bioprinting tissue analogs: Current development and translational implications
Liu, S., Cheng, L., Liu, Y., Zhang, H., Song, Y., Park, J.-H., Dashnyam, K., Lee, J., Khalak, F. A.-H., Riester, O., et al. (2023) · Journal of Tissue Engineering · doi:10.1177/20417314231187113 · Cited by 57
“24,29,34,41 Even for the relatively new lithogra-phy-based bioprinting technologies, such as SLA and DLP, the bioinks are usually composed of a low-viscosity photo-cross-linkable hydrogel precursor 42 and photosensitive resin materials.”
Bhardwaj, D., Singhmar, R., Garg, M., Gupta, D., Dhiman, A., Han, S. S., & Agrawal, G. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112736 · Cited by 51
Chandra, D. K., Reis, R. L., Kundu, S. C., Kumar, A., & Mahapatra, C. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c00166 · Cited by 54
Hu, Y., Zhu, T., Cui, H., & Cui, H. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202403762 · Cited by 57
Bioprinting of Human Liver‐Derived Epithelial Organoids for Toxicity Studies
Bouwmeester, M. C., Bernal, P. N., Oosterhoff, L. A., van Wolferen, M. E., Lehmann, V., Vermaas, M., Buchholz, M., Peiffer, Q. C., Malda, J., van der Laan, L. J. W., et al. (2021) · Macromolecular Bioscience · doi:10.1002/mabi.202100327 · Cited by 46
Self-citationJanarthanan, G., Kim, J. H., Kim, I.-G., Lee, C., Chung, E., & Noh, I. (2022) · Biofabrication · doi:10.1088/1758-5090/ac6c4c · Cited by 56
Application of additive manufacturing in the biomedical field- A review
Harding, A., Pramanik, A., Basak, A. K., Prakash, C., & Shankar, S. (2023) · Annals of 3D Printed Medicine · doi:10.1016/j.stlm.2023.100110 · Cited by 56
Balavigneswaran, C. K., Selvaraj, S., Vasudha, T. K., Saravanakumar, I., & Muthuvijayan, V. (2023) · Biomaterials Advances · doi:10.1016/j.bioadv.2023.213570 · Cited by 54
Bakht, S. M., Pardo, A., Gómez‐Florit, M., Reis, R. L., Domingues, R. M. A., & Gomes, M. E. (2021) · Journal of Materials Chemistry B · doi:10.1039/d1tb00717c · Cited by 53
Open-source CAD-CAM simulator of the extrusion-based bioprinting process
Bonatti, A. F., Chiesa, I., Vozzi, G., & Maria, C. D. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00172 · Cited by 49
Hyaluronic acid-based multifunctional carriers for applications in regenerative medicine: A review
An, C., Li, H., Zhao, Y., Zhang, S., Zhao, Y., Zhang, Y., Yang, J., Zhang, L., Ren, C., Zhang, Y., et al. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.123307 · Cited by 52
3D Bioprinting in Otolaryngology: A Review
McMillan, A., McMillan, N., Gupta, N., Kanotra, S. P., & Salem, A. K. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202203268 · Cited by 51
Krishna, D. V., & Sankar, M. R. (2023) · Engineered Regeneration · doi:10.1016/j.engreg.2023.07.002 · Cited by 50
Advancing 3D Printing through Integration of Machine Learning with Algae‐Based Biopolymers
Sofian, A. D. A. B. A., Lim, H. R., Chew, K. W., & Show, P.-L. (2024) · ChemBioEng Reviews · doi:10.1002/cben.202300054 · Cited by 51
García‐Villén, F., Ruíz, S., Lafuente‐Merchan, M., Gallego, I., Sainz-Ramos, M., del Burgo, L. S., & Pedraz, J. L. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13111806 · Cited by 49
“Printability can be defined as the ability of a BI or BMI to be continuously extruded at a constant printing speed and pressure [4,64].”
BackgroundVenkatachalam, A., Balasubramaniam, A., Wilms, P., Zhang, L., & Schutyser, M. A. I. (2023) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2023.108760 · Cited by 53
Metadata
- Authors
- Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J.
- Affiliations
- AO Foundation (CH)
- Utrecht University (NL)
- Corresponding author
- Malda, Jos
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-08-28
- Volume
- 120
- Issue
- 19
- Pages
- 10850-10877
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- PMC
- PMC7564085
- OpenAlex
- W3082213210
- Cited by
- 1,359
- References
- 287
- Citations by year
- 2026: 305 · 2025: 283 · 2024: 280 · 2023: 202 · 2022: 176 · 2021: 107 · 2020: 6
- FWCI
- 10.29
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Chemical Reviews (publishedVersion, cc-by-nc-nd)
- PubMed Central (publishedVersion)
- PubMed (publishedVersion)
- University of Twente Research Information (publishedVersion, cc-by-nc-nd)
- HAL (submittedVersion)
- Utrecht University Repository (Utrecht University) (submittedVersion, other-oa)
- University of Twente Research Information (submittedVersion, cc-by-nc-nd)
- Funders
- AO Foundation (3D OC)
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek (024.003.013)
- ReumaNederland (LLP12, LLP22)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Keywords
- bioinks, 3D bioprinting, printability, shape fidelity, hydrogels, extrusion-based bioprinting, rheology, physicochemical parameters, prediction model
- MeSH terms
- Humans, Ink, Tissue Engineering, Bioprinting, Printing, Three-Dimensional
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.