Polymeric Biomaterials for Medical Implants and Devices
The DOI matches its Crossref record; 147 of the 149 references it cites were found in a registry or an index.
Abstract
In this review article, we focus on the various types of materials used in biomedical implantable devices, including the polymeric materials used as substrates and for the packaging of such devices. Polymeric materials are used because of the ease of fabrication, flexibility, and their biocompatible nature as well as their wide range of mechanical, electrical, chemical, and thermal behaviors when combined with different materials as composites. Biocompatible and biostable polymers are extensively used to package implanted devices, with the main criteria that include gas permeability and water permeability of the packaging polymer to protect the electronic circuit of the device from moisture and ions inside the human body. Polymeric materials must also have considerable tensile strength and should be able to contain the device over the envisioned lifetime of the implant. For substrates, structural properties and, at times, electrical properties would be of greater concern. Section 1 gives an introduction of some medical devices and implants along with the material requirements and properties needed. Different synthetic polymeric materials such as polyvinylidene fluoride, polyethylene, polypropylene, polydimethylsiloxane, parylene, polyamide, polytetrafluoroethylene, poly(methyl methacrylate), polyimide, and polyurethane have been examined, and liquid crystalline polymers and nanocomposites have been evaluated as biomaterials that are suitable for biomedical packaging (section 2). A summary and glimpse of the future trend in this area has also been given (section 3). Materials and information used in this manuscript are adapted from papers published between 2010 and 2015 representing the most updated information available on each material.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Apart from the conductive functional materials, the insulative packaging materials are also a critical part of sensing recorders. Many popular insulating soft materials have been used for packaging sensing electrodes,[318] such as PI,[319,320] PDMS,[321,322] hydrogel,[323,324] etc., as they have suitable mechanical, dielectric and biological properties.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [318]
Citations
Cites
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Vepari, C., & Kaplan, D. L. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.013 · Cited by 2,561
The piezoelectricity of poly (vinylidene fluoride)
Kawai, H. (1969) · Japanese Journal of Applied Physics · doi:10.1143/jjap.8.975 · Cited by 2,044
Biomedical applications of polymer-composite materials: a review
Ramakrishna, S., Mayer, J., Wintermantel, E., & Leong, K. W. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00241-4 · Cited by 1,642
A review of stimuli-responsive shape memory polymer composites
Meng, H., & Li, G. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.023 · Cited by 1,190
Superconductivity in 4 Angstrom Single-Walled Carbon Nanotubes
Tang, Z. K., Zhang, L., Wang, N., Zhang, X. X., Wen, G. H., Li, G. D., Wang, J. N., Chan, C. T., & Sheng, P. (2001) · Science · doi:10.1126/science.1060470 · Cited by 816
Ambulatory esophageal pH monitoring using a wireless system
Pandolfino, J. (2003) · The American Journal of Gastroenterology · doi:10.1016/s0002-9270(03)00062-5 · Cited by 528
Hassler, C., Boretius, T., & Stieglitz, T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22169 · Cited by 501
Polyurethanes in Biomedical Applications
Burke, A., & Hasirci, N. (2004) · Advances in Experimental Medicine and Biology · doi:10.1007/978-0-306-48584-8_7 · Cited by 494
Development of Implantable Medical Devices: From an Engineering Perspective
Joung, Y.-H. (2013) · International Neurourology Journal · doi:10.5213/inj.2013.17.3.98 · Cited by 367
Research works printed but not linked: 14
- Kammula R. G., 2001, Med. Device Diagn. Ind., 23, 82
- Register O. o. t. F., 2010, Code of Federal Regulations, Title 21, Food and Drugs, Pt. 800–1299, Revised as of April 1, 2010
- Kim J., 2012, 5th European Conference of the International Federation for Medical and Biological Engineering, 1214
- Kuo A., 1999, Polymer Data Handbook
- 10.7537/j.issn.1545-1003 · doi:10.7537/j.issn.1545-1003
- Jeong J., 2012, Sens. Mater., 24, 189
- 10.1111/j.1572-0241.2003.07398.x · doi:10.1111/j.1572-0241.2003.07398.x · Paper page
- Chang J. H.-C., 2014, IEEE 27th International Conference onMicro Electro Mechanical Systems (MEMS), 1127
- Dutta S. R. B., 2013, Int. J. Rec. Sci. Res., 4, 1661
- Kirsten S., 2012, 35th International Spring Seminar on Electronics Technology (ISSE), 123
- de Beeck M. O., 2013, 2013 European Microelectronics Packaging Conference (EMPC), 1
- Imenes K., 2012, 4th Electronic System-Integration Technology Conference (ESTC), 1
- Kubyshkina G., 2011, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, 3, 11
- Sundaram V., 2011, Proceedings of the 61st IEEE Electronic Components and Technology Conference (ECTC), 1308
Cited by
Items 301–400 of 776
Yoo, H., Mahato, M., Oh, W., Ha, J., Han, H., Ahn, C. W., & Oh, I. (2024) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2024.116419 · Cited by 20
Polymer Bioelectronics: A Solution for Both Stimulating and Recording Electrodes
Cuttaz, E. A., Bailey, Z., Chapman, C. A. R., Goding, J. A., & Green, R. A. (2024) · Advanced Healthcare Materials · doi:10.1002/adhm.202304447 · Cited by 19
Zuñiga-Zamorano, I., Melendez‐Ortiz, H. I., Costoya, A., Alvarez‐Lorenzo, C., Concheiro, Á., & Bucio, E. (2017) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2017.02.008 · Cited by 18
NMR, FT-IR and raman characterization of biomaterials
Pradhan, S. K., Rajamani, S., Agrawal, G., Dash, M., & Samal, S. K. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100737-2.00007-8 · Cited by 23
Winnacker, M., Lamparelli, D. H., Capacchione, C., Güngör, H. H., Stieglitz, L., Rodewald, K., Schmidt, M., & Gronauer, T. F. (2020) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202000110 · Cited by 18
Xu, Q., Xu, Z., Jiang, X., Yarmolenko, M. A., Rogachev, А. V., & Rogachev, A. V. (2020) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.126584 · Cited by 18
Hosseini, S. M., Rihani, R. T., Batchelor, B. L., Stiller, A. M., Pancrazio, J. J., Voit, W., & Ecker, M. (2018) · Frontiers in Materials · doi:10.3389/fmats.2018.00066 · Cited by 20
“For future applications, including translation to the clinic, it is necessary to have substrate materials with increased durability under in vivo conditions to enable chronic experiments over the course of years (Ryu and Shenoy, 2009; Rubehn and Stieglitz, 2010; Takmakov et al., 2015; Teo et al., 2016; Lecomte et al.,…”
BackgroundNifant’ev, I., Shlyakhtin, A., Kosarev, M., Gavrilov, D., Karchevsky, S., & Ivchenko, P. (2019) · Polymers · doi:10.3390/polym11101641 · Cited by 17
Pillai, R. R., & Mohan, L. (2025) · Prosthesis · doi:10.3390/prosthesis7060143 · Cited by 17
The 3D Printing in Military Applications: FDM Technology, Materials, and Implications
Marciniak, M. (2023) · Advances in Military Technology · doi:10.3849/aimt.01846 · Cited by 17
Electromechanical coupling in polyetheretherketone through flexoelectricity
Zhang, C., Wu, J. J., Wu, C., He, Z., Zhu, D., & Chen, W. (2024) · Applied Physics Letters · doi:10.1063/5.0225727 · Cited by 17
Fibers of cellulose sugarcane bagasse with bromelain enzyme immobilized to application in dressing
da Costa, S. A., Cerón, A. A., Petreca, B. B., & da Costa, S. M. (2020) · SN Applied Sciences · doi:10.1007/s42452-020-2100-1 · Cited by 17
“The materials used may be biodegradable, natural, synthetic, or non-biodegradable [3].”
BackgroundMulti-layer PDMS films having antifouling property for biomedical applications
Mousavi, M., Ghaleh, H., Jalili, K., & Abbasi, F. (2020) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2020.1856300 · Cited by 17
Li, X., Wang, F., Wang, X., Zhao, W., Liu, H., Li, M., Zhao, Y., Zhang, L., & Huang, C. (2022) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2022.132059 · Cited by 17
Gray, P. J., Hornick, J. E., Sharma, A., Weiner, R. G., Koontz, J. L., & Duncan, T. V. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b02585 · Cited by 17
Aramid fibers composites to innovative sustainable materials for biomedical applications
Kowsari, E., Haddadi‐Asl, V., Ajdari, F. B., & Hemmat, J. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816872-1.00006-6 · Cited by 17
Tissue-like Bioelectronic Material Strategies for Personalized Closed-Loop Neuroprostheses
Kim, Y., Lee, H., Lee, J., Shin, M., & Son, D. (2025) · ACS Nano · doi:10.1021/acsnano.5c07150 · Cited by 21
Self-citationIn Vivo Imaging of Biodegradable Implants and Related Tissue Biomarkers
Riehakainen, L., Cavallini, C., Armanetti, P., Panetta, D., Caramella, D., & Menichetti, L. (2021) · Polymers · doi:10.3390/polym13142348 · Cited by 16
“) [1], ceramics (aluminium oxide, zirconium oxide, carbon-silicon etc.”
Xia, Z., Liu, B., Xiao, Y., Hu, W., Deng, M., & Lü, C. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c13496 · Cited by 21
Insertable Biosensors: Combining Implanted Sensing Materials with Wearable Monitors
Chimene, D., Queener, K. M. K., Ko, B. S., McShane, M. J., & Daniele, M. A.-A. (2024) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-110222-101045 · Cited by 21
Costa, T., Sampaio‐Marques, B., Neves, N. M., Aguilar, H., & Fraga, A. G. (2024) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2024.1390513 · Cited by 16
“…(Vallejos et al., 2022), biomedical fi elds (tissue engineering and drug delivery) (Bolívar-Monsalve et al., 2021), medical devices and implants (Teo et al., 2016), daily products (household cleaning (Pecquet et al., 2019) and cosmetic products (Alves et al., 2020)) as well as in the automotive…”
BackgroundImran, M., Afzal, A. M., Iqbal, M. W., Fouda, A. M., Hegazy, H. H., & Mumtaz, S. (2024) · Ceramics International · doi:10.1016/j.ceramint.2024.09.222 · Cited by 15
Cysteine Conjugation: An Approach to Obtain Polymers with Enhanced Muco- and Tissue Adhesion
Chrószcz-Porębska, M., & Gadomska‐Gajadhur, A. (2024) · International Journal of Molecular Sciences · doi:10.3390/ijms252212177 · Cited by 17
“…in various medical fields, including drug delivery systems for controlled and targeted drug release [6,7], scaffolds and biodegradable matrices for tissue regeneration [8–10], orthopedic and dental implants [11,12], medical devices such as catheters and stents [13,14], and wound care [15,16].”
Zhou, Y., Zhang, Q., Wu, J., Xi, C., & Meyerhoff, M. E. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb01814f · Cited by 20
Cesare, F. D., Mattia, E. D., Zussman, E., & Macagnano, A. (2020) · Environmental Science Nano · doi:10.1039/d0en00268b · Cited by 18
One-Step Preparation of Green Fabric for Continuous Antibacterial Applications
Huang, R., Hu, M., Liang, W., Zheng, J., Du, Y., Lin, Y., Wang, H., Guo, W., Zeng, Z., Li, C., et al. (2021) · Engineering · doi:10.1016/j.eng.2020.08.022 · Cited by 15
A universal biocompatible coating for enhanced lubrication and bacterial inhibition
Suo, D., Rao, J., Wang, H., Zhang, Z., Leung, P. H. M., Zhang, H., Tao, X., & Zhao, X. (2022) · Biomaterials Science · doi:10.1039/d2bm00598k · Cited by 17
Mohanapriya, S., & Raj, V. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.01.006 · Cited by 18
Synthesis, optical and morphological properties of novel pyrazole-based oligoamide film
Çetin, A., & Korkmaz, A. (2018) · Optical Materials · doi:10.1016/j.optmat.2018.08.045 · Cited by 16
Skwira, A., Szewczyk, A., & Prokopowicz, M. (2019) · Polymers · doi:10.3390/polym11091450 · Cited by 16
“The main features of appropriate implantable coating mixtures are biocompatibility, biostability and desired mechanical properties [25].”
BackgroundSultan, M. A., Aized, T., Farooq, M., Anwar, S., Ahmad, N., Tauseef, A., & Riaz, F. (2025) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2025.1549191 · Cited by 18
“Biocompatibility is a crucial parameter for material selection which indicates the implant ’ s performance inside the body without any reaction to body fl uids and in fl ammation (Ratner, 2015; Teo et al., 2016).”
Aldawood, F. K. (2025) · Materials & Design · doi:10.1016/j.matdes.2025.114369 · Cited by 15
Ammann, K. R., Li, M., Hossainy, S., & Slepian, M. J. (2019) · ACS Applied Bio Materials · doi:10.1021/acsabm.9b00175 · Cited by 15
Xu, X., Wang, H., Zhang, S., Mei, X., Ying, B., Li, R., & Qin, Y. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.103166 · Cited by 15
Polyacrylate resins containing fluoroalkyl groups for powder clear coatings
Pojnar, K., Pilch‐Pitera, B., Byczyński, Ł., Zając, W., Walczak, M., & Kramek, A. (2022) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2022.107116 · Cited by 15
Gudkov, S. V., Li, R., Serov, D. A., Burmistrov, D. E., Baimler, I. V., Baryshev, A. S., Simakin, A. V., Уваров, О. В., Astashev, M. E., Nefedova, N. B., et al. (2023) · International Journal of Molecular Sciences · doi:10.3390/ijms24010869 · Cited by 16
Molecularly Imprinted Polymeric Biomaterials in Diagnosis and Medical Practice
Göktürk, I., Güler, K. Ç., Yılmaz, F., Oktar, C., Yılmaz, G. E., & Denizli, A. (2024) · Biomedical Materials & Devices · doi:10.1007/s44174-024-00192-2 · Cited by 19
“Despite not having been applied clinically, imprinted DDS shows immense promise in developing effective dosage forms [1, 2].”
Polymeric Heart Valves: Do They Represent a Reliable Alternative to Current Prosthetic Devices?
Todesco, M., Lezziero, G., Gerosa, G., & Bagno, A. (2025) · Polymers · doi:10.3390/polym17050557 · Cited by 20
“11 of 45 PTFE exhibits high chemical inertia, high stability, and strong mechanical properties [60].”
Direct bonding of liquid crystal polymer to glass
Alam, A. U., Qin, Y., Howlader, M. M. R., & Deen, M. J. (2016) · RSC Advances · doi:10.1039/c6ra17729h · Cited by 17
Lv, J., Yin, X., Zeng, Q., Dong, W., Liu, H., & Zhu, L. (2017) · Journal of Polymer Research · doi:10.1007/s10965-017-1224-5 · Cited by 15
Liu, Z., Dong, L., Cheng, K., Luo, Z., & Weng, W. (2018) · RSC Advances · doi:10.1039/c8ra02601g · Cited by 17
Biomedical Implants for Regenerative Therapies
Gonçalves, A. D., Balestri, W., & Reinwald, Y. (2020) · IntechOpen eBooks · doi:10.5772/intechopen.91295 · Cited by 28
“Test categories investigate the materials’ cytotoxicity, sensitization, irritation, toxicity, implantation and biodegradation [71].”
BackgroundNon-thermal plasma activation of BPDA-PPD polyimide for improved cell-material interaction
Álvarez, L. A., Cools, P., Schaubroeck, D., Asadian, M., Aliakbarshirazi, S., Declercq, H., de Beeck, M. O., Morent, R., Smet, H. D., & Geyter, N. D. (2020) · Polymer · doi:10.1016/j.polymer.2020.122831 · Cited by 17
Lázaro, M., Lázaro, A., & Villarino, R. (2020) · Sensors · doi:10.3390/s20216342 · Cited by 15
Chemical Hydrogels Bearing Thiazolium Groups with a Broad Spectrum of Antimicrobial Behavior
Muñoz‐Bonilla, A., Zágora, J., Plachá, D., Echeverría, C., Chiloeches, A., & Fernández‐García, M. (2020) · Polymers · doi:10.3390/polym12122853 · Cited by 15
Prаhаsаnti, C., Setijanto, D., Ernawati, D. S., Ridwаn, R. D., Buntoro, D., Kamadjaja, K., Yuliati, A., Meizarini, A., Hendrijantini, N., Krismariono, A., et al. (2022) · Research Journal of Pharmacy and Technology · doi:10.52711/0974-360x.2022.00312 · Cited by 15
Song, L., Ye, Q., Ge, X., Misra, A. K., Tamerler, C., & Spencer, P. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.12.001 · Cited by 16
Polydiacetylene (PDA) Embedded Polymer-Based Network Structure for Biosensor Applications
Jang, H., Jeon, J., Shin, M., Kang, G., Ryu, H., Kim, S. M., & Jeon, T. (2025) · Gels · doi:10.3390/gels11010066 · Cited by 18
“Furthermore, incorporating PDA into polymeric network structures already used in various fields, such as medical devices [29] and food packaging [30], can enhance user-accessibility.”
Hydrophilization of Polypropylene by Gaseous Plasma Treatments and Hydrophobic Recovery
Primc, G. (2025) · Polymers · doi:10.3390/polym17192644 · Cited by 14
“Polypropylene (PP) is a commonly used polymer with broad applications from electronics to the food industry and medical products [1–3].”
Phosphorus and Silicon‐Based Macromolecules as Degradable Biomedical Polymers
Haudum, S., Strasser, P., & Teasdale, I. (2023) · Macromolecular Bioscience · doi:10.1002/mabi.202300127 · Cited by 15
Kondyurina, I. V., & Kondyurin, A. V. (2023) · Journal of Functional Biomaterials · doi:10.3390/jfb14080432 · Cited by 18
“However, despite how all modern implants satisfy the physical and chemical stability, non-immunogenicity and nontoxicity requirements [16],”
Hua, S., Wang, B., Ding, C., & Yan, Y. (2023) · Talanta · doi:10.1016/j.talanta.2023.125139 · Cited by 14
Kim, H., Kong, S. M., Kim, J. A., Yoon, G., Na, Y. H., & Kim, S. K. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.147189 · Cited by 14
Ślusarczyk, K., Flejszar, M., Spilarewicz, K., Wytrwał-Sarna, M., Awsiuk, K., Wolski, K., Raczkowska, J., Janiszewska, N., & Chmielarz, P. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.112953 · Cited by 14
Biswas, A. R., BANERJEE, N., Mandal, P., Maity, S. R., Sen, B., Bhowmik, A., & Ammarullah, M. I. (2025) · Philosophical Magazine Letters · doi:10.1080/09500839.2025.2537089 · Cited by 14
“Medical disposable tubes, boxes, syringes, and joint and finger implants use polyethylene [8–13]. functionality, ideal for biomedical sectors.”
Modification of relevant polymeric materials for medical applications and devices
Velazco‐Medel, M. A., Camacho‐Cruz, L. A., & Bucio, E. (2020) · Medical Devices & Sensors · doi:10.1002/mds3.10073 · Cited by 14
Multivalued Inverse Design: Multiple Surface Geometries from One Flat Sheet
Griniasty, I., Mostajeran, C., & Cohen, I. (2021) · Physical Review Letters · doi:10.1103/physrevlett.127.128001 · Cited by 14
Kaewmanee, R., Wang, F., Pan, Y., Mei, S., Meesane, J., Li, F., Wu, Z., & Wei, J. (2022) · Biomaterials Science · doi:10.1039/d2bm00622g · Cited by 14
Electrospun Nanofibers for Dura Mater Regeneration: A Mini Review on Current Progress
Pant, B., Park, M., & Kim, A. A. (2023) · Pharmaceutics · doi:10.3390/pharmaceutics15051347 · Cited by 16
Albright, V., Marin, A., Kaner, P., Sukhishvili, S. A., & Andrianov, A. K. (2019) · ACS Applied Bio Materials · doi:10.1021/acsabm.9b00485 · Cited by 14
Gao, Y., Liu, D., Zhou, J., Zhang, W., Sun, D., Wang, S., Yang, Y., Xiang, Y., Zhang, Y., Lei, W., et al. (2025) · Science Advances · doi:10.1126/sciadv.adw3845 · Cited by 14
“Expanded polytetrafluoroethylene (e-PTFE) is one of the most commonly used polymeric biomaterials for medical implants ( 1 – 3 ).”
New dansyl labeled polysilane: Synthesis, characterization and sensor application
Chibac-Scutaru, A. L., Simionescu, M., Săcărescu, G., Buruiana, E. C., & Săcărescu, L. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.08.013 · Cited by 13
Design Principles in Biomaterials and Scaffolds
Zhu, Y., & Wagner, W. R. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-809880-6.00030-8 · Cited by 17
Wei, T., Wang, J., Yu, X., Wang, Y., Wu, Q., & Chen, G. (2019) · RSC Advances · doi:10.1039/c9ra05258e · Cited by 13
MEMS-based hollow microneedles for transdermal drug delivery
Mishra, R., & Bhattacharyya, T. K. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819838-4.00007-9 · Cited by 13
Fitri, T. F. M., Osman, A. F., Alosime, E. M., Othman, R., Hashim, F., & Abdullah, M. A. A. (2021) · Polymers · doi:10.3390/polym13244345 · Cited by 14
“biocompatible, flexible, and soft [1,2].”
BackgroundZakharchenko, A., Xue, Y., Keeney, S. J., Rock, C. A., Alferiev, I. S., Stachelek, S. J., Takano, H., Thomas, T., Nagaswami, C., Krieger, A. Μ., et al. (2022) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2120694119 · Cited by 13
An Overview of the Tympanostomy Tube
Nagar, R. R., & Deshmukh, P. T. (2022) · Cureus · doi:10.7759/cureus.30166 · Cited by 13
“Inert materials can be described as biomaterials that cause no or little host response [16].”
BackgroundLiao, T., King, P. C., Zhu, D., Crawford, R. J., Ivanova, E. P., Thissen, H. W., & Kingshott, P. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c01506 · Cited by 13
Polymeric Biomaterials in Clinical Practice
Marjanovic-Balaban, Z. R., & Jelić, D. (2017) · Springer eBooks · doi:10.1007/978-3-319-68025-5_4 · Cited by 13
Shear-Induced Structuring for Multiple Parallel Gel Filaments Obtained from Casein–Alginate Hybrids
Takayama, Y., & Kato, N. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b03038 · Cited by 13
Yin, Y., Mo, J., & Feng, J. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-05219-9 · Cited by 13
Wongin, S., Wangdee, C., Nantavisai, S., Banlunara, W., Nakbunnum, R., Waikakul, S., Chotiyarnwong, P., Roytrakul, S., & Viravaidya‐Pasuwat, K. (2021) · Biomaterials Science · doi:10.1039/d1bm00239b · Cited by 14
Dong, W., Zeng, Q., Yin, X., Liu, H., Lv, J., & Zhu, L. (2017) · Polymer Composites · doi:10.1002/pc.24500 · Cited by 13
Printing of Woodpile Scaffold Using Fresnel Lens for Tissue Engineering
Ho, C. M. B., Hu, K., Mishra, A., Noh, J., Kim, J., Lee, S., Yoon, M., & Yoon, Y. (2021) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-021-00322-x · Cited by 14
Self-citationSerov, D. A., Baimler, I. V., Burmistrov, D. E., Baryshev, A. S., Yanykin, D. V., Astashev, M. E., Simakin, A. V., & Gudkov, S. V. (2022) · Polymers · doi:10.3390/polym14224880 · Cited by 13
Micro‐ and Nanomanufacturing for Biomedical Applications and Nanomedicine: A Perspective
Wang, F., Harker, A. H., Edirisinghe, M. J., & Parhizkar, M. (2023) · Small Science · doi:10.1002/smsc.202300039 · Cited by 13
Prashar, G., & Vasudev, H. (2023) · Applied Surface Science Advances · doi:10.1016/j.apsadv.2023.100533 · Cited by 12
Biopolymer‐based coatings for anti‐corrosion of Ti‐alloys used in biomedical applications: A review
Al‐Mosawi, A. I., & Abdulsada, S. A. (2024) · Polymer Engineering and Science · doi:10.1002/pen.26681 · Cited by 12
Custom Implants and Beyond: The Biomedical Potential of Additive Manufacturing
Gupta, A. K., Choudhari, A., Kumar, A., & Anamika, G. (2024) · Archives of Case Reports · doi:10.29328/journal.acr.1001094 · Cited by 12
“Stainless steel is often chosen for plates, screws, and pins used in orthopedic surgeries, offering a reliable and affordable option for internal (cid:976)ixation [28].”
BackgroundBiomaterials and Their Applications
Menagadevi, M., Nirmala, M., Thiyagarajan, D., & Somasundram, D. (2024) · Biomedical Materials & Devices · doi:10.1007/s44174-024-00215-y · Cited by 12
“The mechanical properties of acrylic bone cement as given in Table 5 The application of Acrylic Polymers is [37] • Polymethyl methacrylate (PMMA) is used for dental implants, joint replacement, and knee replacement.”
Bioabsorbable PLA/PHA composite pins for orthopedic applications: In vitro and in vivo study
Sim, E. J., Sakthiabirami, K., Jung, T., Jo, S. K., Lee, S. J., Xu, P., Sung, H. K., Lee, E. H., Yoon, K. C., Kang, K. S., et al. (2025) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2025.03.023 · Cited by 13
Self-citationUltrasound Intra Body Multi Node Communication System for Bioelectronic Medicine
Jaafar, B., Luo, J., Firfilionis, D., Soltan, A., Neasham, J. A., & Degenaar, P. A. (2019) · Sensors · doi:10.3390/s20010031 · Cited by 12
“Also, PU has excellent water resistance [33], and has already been used in the pacemaker leads from a Medtronic model P1501DR [34], indicating biocompatibility.”
MethodCorrosion Behavior of Zn, Fe and Fe-Zn Powder Materials Prepared via Uniaxial Compression
Gorejová, R., Šišoláková, I., Cipa, P., Džunda, R., Sopčák, T., Oriňák, A., & Oriňáková, R. (2021) · Materials · doi:10.3390/ma14174983 · Cited by 12
“The advantage of metals and their alloys in comparison to polymers or ceramics is in their higher strength and toughness [16].”
BackgroundBiomaterial Design Inspired by Regenerative Research Organisms
Sapru, S., Dill, M. N., & Simmons, C. S. (2022) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c00486 · Cited by 12
Kumar, C., & Viswanath, P. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.08.055 · Cited by 12
New directions in membrane designs for biosensors
Lopes, I. C., Zebda, A., & Vadgama, P. M. (2018) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2018.07.009 · Cited by 12
Security Cost Aware Data Communication in Low-Power IoT Sensors with Energy Harvesting
Fang, X., Yang, M., & Wu, W. (2018) · Sensors · doi:10.3390/s18124400 · Cited by 12
Zhou, Y., Tan, J., Wu, J., Zhang, Q., Andre, J. S., Xi, C., Chen, Z., & Meyerhoff, M. E. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.04.021 · Cited by 13
Vanhaverbeke, C., Cauwe, M., Stockman, A., de Beeck, M. O., & Smet, H. D. (2019) · Thin Solid Films · doi:10.1016/j.tsf.2019.137424 · Cited by 13
Introduction to Ideal Characteristics and Advanced Biomedical Applications of Biomaterials
Kapusetti, G., More, N., & Choppadandi, M. (2019) · Springer eBooks · doi:10.1007/978-981-13-3705-5_8 · Cited by 16
Ng, C., Rao, J., & Nicholls, J. R. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.11.009 · Cited by 12
“[6] Teo AJ, Mishra A, Park I, Kim YJ, Park WT, Yoon YJ.”
BackgroundDevelopment and Study of Biocompatible Polyurethane-Based Polymer-Metallic Nanocomposites
Csarnovics, I., Burunkova, Y. É., Свяжина, Д. С., Oskolkov, E., Alkhalil, G., Александровна, О. Е., Nilova, L., Szabó, I. A., Rutka, P., Bene, K., et al. (2020) · Nanotechnology Science and Applications · doi:10.2147/nsa.s245071 · Cited by 11
Bil, M., Osica, I., Mrówka, P., & Święszkowski, W. (2020) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2020.109392 · Cited by 12
Piezoelectric composites in neural tissue engineering: material and fabrication techniques
Askari, S., & Bozcheloei, Z. A. (2022) · Journal of Composites and Compounds · doi:10.52547/jcc.4.1.5 · Cited by 15
Serov, D. A., Burmistrov, D. E., Simakin, A. V., Astashev, M. E., Уваров, О. В., Ромеовна, Т. Э., Semenova, A., Lisitsyn, A. B., & Gudkov, S. V. (2022) · Nanomaterials · doi:10.3390/nano12234158 · Cited by 11
Jamalpour, M., & Alizadeh, R. (2023) · Intermetallics · doi:10.1016/j.intermet.2023.108133 · Cited by 11
Han, J., Zhang, K., Rao, Z., Chen, J., Meng, Y. Z., Quan, D., & Bai, Y. (2023) · Applied Surface Science · doi:10.1016/j.apsusc.2023.159146 · Cited by 11
Aloe vera hydrogel for supercooling applications: a review
Dada, M. O., & Popoola, A. P. I. (2024) · Discover Materials · doi:10.1007/s43939-024-00080-y · Cited by 15
“Macromo-lecular engineering assesses low-cost, custom polymeric structures for vascular devices, soft-tissue replacement and drug delivery focusing on bulk morphology for physical properties like strength, density, and elasticity [25].”
Mitigating the environmental effects of healthcare: the role of the endocrinologist
Rizan, C., Rotchell, J. M., Eng, P. C., Robaire, B., Ciocan, C. M., Kapoor, N., Kalra, S., & Sherman, J. D. (2025) · Nature Reviews Endocrinology · doi:10.1038/s41574-025-01098-9 · Cited by 12
“…tubes, gastric tubes or urinary catheters, and through implanted medical devices, many of which contain plastic components, including those used for hearing loss, heart valves, pacemakers, hip replacement hardware and cements, intra-ocular lenses, mesh for hernia repair and stents 119 .”
Metadata
- Authors
- Teo, A. J. T., Mishra, A., Park, I., Kim, Y.-J., Park, W.-T., & Yoon, Y.-J.
- Affiliations
- Nanyang Technological University (SG)
- Korea Advanced Institute of Science and Technology (KR)
- Seoul National University of Science and Technology (KR)
- Corresponding author
- Park, Woo-Tae
- Yoon, Yong-Jin
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-03-04
- Volume
- 2
- Issue
- 4
- Pages
- 454-472
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W2335675049
- Cited by
- 778
- References
- 149
- Citations by year
- 2026: 46 · 2025: 90 · 2024: 107 · 2023: 85 · 2022: 84 · 2021: 93 · 2020: 81 · 2019: 75 · 2018: 65 · 2017: 44 · 2016: 8
- FWCI
- 26.15
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Biomaterials Science & Engineering (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Ministry of Education - Singapore (RG35/12, RGC4/13)
- Science and Engineering Research Council, Agency for Science, Technology and Research (SERC1121770039)
- National Research Foundation of Korea funded by the Ministry of Science, ICT & Future Planning (NRF-2013M2A2A9043274)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Synthesis and properties of polymers
- Keywords
- polymeric biomaterials, biomedical implants, biocompatible polymers, device packaging, polymer substrates, polyvinylidene fluoride, polyethylene, polypropylene, polydimethylsiloxane, parylene, polyamide, polytetrafluoroethylene, poly(methyl methacrylate), polyimide, polyurethane, liquid crystalline polymers, polymer nanocomposites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.