Polymeric Biomaterials for Medical Implants and Devices
The DOI matches its Crossref record; 147 of the 149 references it cites were found in a registry or an index.
Abstract
In this review article, we focus on the various types of materials used in biomedical implantable devices, including the polymeric materials used as substrates and for the packaging of such devices. Polymeric materials are used because of the ease of fabrication, flexibility, and their biocompatible nature as well as their wide range of mechanical, electrical, chemical, and thermal behaviors when combined with different materials as composites. Biocompatible and biostable polymers are extensively used to package implanted devices, with the main criteria that include gas permeability and water permeability of the packaging polymer to protect the electronic circuit of the device from moisture and ions inside the human body. Polymeric materials must also have considerable tensile strength and should be able to contain the device over the envisioned lifetime of the implant. For substrates, structural properties and, at times, electrical properties would be of greater concern. Section 1 gives an introduction of some medical devices and implants along with the material requirements and properties needed. Different synthetic polymeric materials such as polyvinylidene fluoride, polyethylene, polypropylene, polydimethylsiloxane, parylene, polyamide, polytetrafluoroethylene, poly(methyl methacrylate), polyimide, and polyurethane have been examined, and liquid crystalline polymers and nanocomposites have been evaluated as biomaterials that are suitable for biomedical packaging (section 2). A summary and glimpse of the future trend in this area has also been given (section 3). Materials and information used in this manuscript are adapted from papers published between 2010 and 2015 representing the most updated information available on each material.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Apart from the conductive functional materials, the insulative packaging materials are also a critical part of sensing recorders. Many popular insulating soft materials have been used for packaging sensing electrodes,[318] such as PI,[319,320] PDMS,[321,322] hydrogel,[323,324] etc., as they have suitable mechanical, dielectric and biological properties.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [318]
Citations
Cites
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Vepari, C., & Kaplan, D. L. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.013 · Cited by 2,561
The piezoelectricity of poly (vinylidene fluoride)
Kawai, H. (1969) · Japanese Journal of Applied Physics · doi:10.1143/jjap.8.975 · Cited by 2,044
Biomedical applications of polymer-composite materials: a review
Ramakrishna, S., Mayer, J., Wintermantel, E., & Leong, K. W. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00241-4 · Cited by 1,642
A review of stimuli-responsive shape memory polymer composites
Meng, H., & Li, G. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.023 · Cited by 1,190
Superconductivity in 4 Angstrom Single-Walled Carbon Nanotubes
Tang, Z. K., Zhang, L., Wang, N., Zhang, X. X., Wen, G. H., Li, G. D., Wang, J. N., Chan, C. T., & Sheng, P. (2001) · Science · doi:10.1126/science.1060470 · Cited by 816
Ambulatory esophageal pH monitoring using a wireless system
Pandolfino, J. (2003) · The American Journal of Gastroenterology · doi:10.1016/s0002-9270(03)00062-5 · Cited by 528
Hassler, C., Boretius, T., & Stieglitz, T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22169 · Cited by 501
Polyurethanes in Biomedical Applications
Burke, A., & Hasirci, N. (2004) · Advances in Experimental Medicine and Biology · doi:10.1007/978-0-306-48584-8_7 · Cited by 494
Development of Implantable Medical Devices: From an Engineering Perspective
Joung, Y.-H. (2013) · International Neurourology Journal · doi:10.5213/inj.2013.17.3.98 · Cited by 367
Research works printed but not linked: 14
- Kammula R. G., 2001, Med. Device Diagn. Ind., 23, 82
- Register O. o. t. F., 2010, Code of Federal Regulations, Title 21, Food and Drugs, Pt. 800–1299, Revised as of April 1, 2010
- Kim J., 2012, 5th European Conference of the International Federation for Medical and Biological Engineering, 1214
- Kuo A., 1999, Polymer Data Handbook
- 10.7537/j.issn.1545-1003 · doi:10.7537/j.issn.1545-1003
- Jeong J., 2012, Sens. Mater., 24, 189
- 10.1111/j.1572-0241.2003.07398.x · doi:10.1111/j.1572-0241.2003.07398.x · Paper page
- Chang J. H.-C., 2014, IEEE 27th International Conference onMicro Electro Mechanical Systems (MEMS), 1127
- Dutta S. R. B., 2013, Int. J. Rec. Sci. Res., 4, 1661
- Kirsten S., 2012, 35th International Spring Seminar on Electronics Technology (ISSE), 123
- de Beeck M. O., 2013, 2013 European Microelectronics Packaging Conference (EMPC), 1
- Imenes K., 2012, 4th Electronic System-Integration Technology Conference (ESTC), 1
- Kubyshkina G., 2011, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, 3, 11
- Sundaram V., 2011, Proceedings of the 61st IEEE Electronic Components and Technology Conference (ECTC), 1308
Cited by
Items 401–500 of 776
Polymeric thermogels: Fundamentals and strategies for their rational design
Chang, J. J., Lin, Q., Ong, N. W. X., Wong, J. H. M., Ow, V., Sim, B., Owh, C., Goh, R. Z. R., Lim, J. Y. C., & Loh, X. J. (2025) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2025.102004 · Cited by 13
Electrically Insulating Plasma Polymer/ZnO Composite Films
Al-Jumaili, A., Kumar, A., Bazaka, K., & Jacob, M. V. (2019) · Materials · doi:10.3390/ma12193099 · Cited by 11
Chytrosz-Wróbel, P., Gołda‐Cępa, M., Włodarczyk, J. R., Kużdżał, J., Fray, M. E., & Kotarba, A. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c01773 · Cited by 11
Zhang, Q., & Meyerhoff, M. E. (2021) · Electroanalysis · doi:10.1002/elan.202100174 · Cited by 12
Thermal management of an interventional medical device with double layer encapsulation
Do, N. B. D., Andreassen, E., Edwardsen, S., Lifjeld, A., Aasmundtveit, K. E., Nguyen, H., & Imenes, K. (2021) · Experimental Heat Transfer · doi:10.1080/08916152.2021.1946208 · Cited by 11
“aThermal conductivity selected based on common values from references [28, 29].”
BackgroundYoshida, D., Park, J., Ikura, R., Yamashita, N., Yamaguchi, H., & Takashima, Y. (2022) · Chemistry Letters · doi:10.1246/cl.220458 · Cited by 12
Hao, J., Lv, L., Ju, L., Xie, X., Liu, Y., & Yang, H. (2018) · Biomedical Signal Processing and Control · doi:10.1016/j.bspc.2018.12.025 · Cited by 11
From wires to waves, a novel sensor system for in vivo pressure monitoring
Wright, D. N., Züchner, M., Annavini, E., Escalona, M. J., Teige, L. H., Tvedt, L. G. W., Lervik, A., Haga, H. A., Guiho, T., Clausen, I., et al. (2024) · Scientific Reports · doi:10.1038/s41598-024-58019-5 · Cited by 10
“Several biocompatible materials can fulfill this requirement 43,44 .”
BackgroundSmith, J. A. M., Başgül, C., Mohammadlou, B. S., Allen, M., & Kurtz, S. M. (2024) · Bioengineering · doi:10.3390/bioengineering11060616 · Cited by 11
“Polymer–polymer interfacial constructs offer an alternative whereby they are less expensive to manufacture, have a closer modulus to bone, and are chemically inert [7,8].”
BackgroundSánchez‐Bodón, J., Moreno, I., Laza, J. M., Larrea, A., Martı́n, C., Irastorza, I., Silván, U., & Vilas‐Vilela, J. L. (2024) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2024.114048 · Cited by 10
He, S., Zhang, Q., Jia, J., Xia, W., Chen, S., Min, F., Song, Y., Yu, Y., Li, J., Li, Z., et al. (2024) · Materials Today Bio · doi:10.1016/j.mtbio.2024.101304 · Cited by 16
“Among these, silicone elastomers, such as polydimethylsiloxane (PDMS), have been widely used to fabricate medical devices for drug delivery, organ reconstruction, and prostheses in clinical treatments [1].”
BackgroundShash, Y. H. (2024) · BMC Musculoskeletal Disorders · doi:10.1186/s12891-024-08066-w · Cited by 10
“They have also been linked to several clinical issues, including contamination, surface deterioration associated with peri-implantitis and skin defects [18].”
Tromp, L., van der Boon, T. A. B., de Hilster, R. H. J., Bank, R. A., & van Rijn, P. (2024) · Advanced Science · doi:10.1002/advs.202407531 · Cited by 12
Calais, G. B., Garcia, G., de Moura, C. F., Soares, J. D. M., Lona, L. M. F., Beppu, M. M., Hernández‐Montelongo, J., & Neto, J. B. M. R. (2025) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2024.1509397 · Cited by 22
Factors Affecting Biofilm Formation and the Effects of These Factors on Bacteria
Kiliç, T. (2025) · IntechOpen eBooks · doi:10.5772/intechopen.1008877 · Cited by 18
Zhao, S., Zhou, C., & Xin, Z. (2025) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c03433 · Cited by 10
Bradford, J. P., Tucker, B. S., Hernandez‐Moreno, G., Charles, P., & Thomas, V. (2021) · Journal of Materials Science · doi:10.1007/s10853-021-06227-z · Cited by 10
Ionic liquid based antimicrobial coating on polymeric surface: A green chemistry approach
Sasi, R., Lathikumari, S. S., Ramesh, G., Sherin, D. R., Kaviyil, J. E., Paul, W., & Joseph, R. (2021) · Results in Surfaces and Interfaces · doi:10.1016/j.rsurfi.2021.100026 · Cited by 10
Thermoplastic zwitterionic elastomer with critical antifouling properties
Wang, K., Arado, T., Huner, A., Seol, H., Liu, X., Wang, H., Hassan, L., Suresh, K., Kim, S., & Cheng, G. (2022) · Biomaterials Science · doi:10.1039/d2bm00190j · Cited by 12
Saskianti, T., Purnamasari, S., Pradopo, S., Nugraha, A. P., Prаhаsаnti, C., Ernawati, D. S., & Kanawa, M. (2023) · European Journal of Dentistry · doi:10.1055/s-0043-1768971 · Cited by 12
Gao, Y., Hu, J., Wang, H., Liu, L., Li, L., & Zheng, S. (2023) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2023.107923 · Cited by 10
Design of an UV-C shielded biopolymer based on a poly(lactic acid)/quercetin/magnesium composite
Casares-López, J. M., Hierro‐Oliva, M., Luque-Agudo, V., González-Martín, M. L., & Gallardo-Moreno, A. M. (2023) · Applied Surface Science · doi:10.1016/j.apsusc.2023.159230 · Cited by 13
Hydrogel-Gated FETs in Neuromorphic Computing to Mimic Biological Signal: A Review
Bag, S. P., Lee, S., Song, J., & Kim, J. (2024) · Biosensors · doi:10.3390/bios14030150 · Cited by 10
Amin, A., Kandil, H., Soliman, A. M., Rabia, A. M., El-Nashar, D. E., & Ismail, M. N. (2017) · Polymer Composites · doi:10.1002/pc.24638 · Cited by 10
Cabal, B., Sevillano, D., Fernández-García, E., Alou, L., Suárez, M., González, N., Moya, J. S., & Torrecillas, R. (2019) · Scientific Reports · doi:10.1038/s41598-019-39324-w · Cited by 10
Thermodynamic Study of Iridium(I) Complexes as a Basis for Chemical Gas-Phase Deposition Technology
Zherikova, K. V., Makarenko, A. M., Karakovskaya, K. I., Zelenina, L. N., Sysoev, S. V., Vikulova, E. S., & Morozova, N. B. (2021) · Russian Journal of General Chemistry · doi:10.1134/s1070363221100108 · Cited by 10
Recent Advances in Polymer-Composite Materials for Biomedical Applications
Kumar, A., Jaiswal, J., Tsuchiya, K., & Singh, G. (2024) · Springer eBooks · doi:10.1007/978-981-97-2104-7_6 · Cited by 13
Polycaprolactone-based shape memory polymeric nanocomposites for biomedical applications
Hada, V., Hashmi, S. A. R., Mili, M., Gorhe, N. R., Sagiri, S. S., Pal, K., Chawdhary, R., Khan, M. M., Naik, A., Prashant, N., et al. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-822858-6.00014-5 · Cited by 11
Liu, T., He, M., Feng, S., Liu, Y., Zhang, X., Wang, Y., Mao, C., Bu, X., & Zhou, Y. (2022) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2022.107315 · Cited by 9
Alginate Hydrogels Reinforced by Dehydration under Stress—Application to a Soft Magnetic Actuator
Leon‐Cecilla, A., Vazquez-Perez, F. J., Gila‐Vilchez, C., de Cienfuegos, L. Á., & López‐López, M. T. (2023) · Gels · doi:10.3390/gels9010039 · Cited by 12
Evaluation of Polymer-Coated Carbon Nanotube Flexible Microelectrodes for Biomedical Applications
Ruhunage, C. K., Dhawan, V., Nawarathne, C. P., Hoque, A., Cui, X. T., & Alvarez, N. T. (2023) · Bioengineering · doi:10.3390/bioengineering10060647 · Cited by 11
“Packaging materials isolate internal electronics from surrounding fluids by preventing the permeation of water vapor and ions [2,22,23].”
BackgroundBarraza‐Vergara, L. F., Carmona‐Sarabia, L., Torres‐García, W., Domenech, M., Méndez-Vega, J., & Torres‐Lugo, M. (2023) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37591 · Cited by 10
Antibacterial Calcium Phosphate Coatings with Zinc Oxide Nanoparticles
Chebodaeva, V. V., Седельникова, М. Б., Khimich, M. A., Bakina, O. V., Tolmachev, A. I., Miller, A. A., Golohvast, K. S., Zakharenko, A. M., Egorkin, V. S., Vyaliy, I. E., et al. (2023) · Coatings · doi:10.3390/coatings13111921 · Cited by 9
Zhang, R., Xia, A.-G., Ni, L., Li, F., Jin, Z.-Y., Yang, S., & Jin, F. (2017) · Advanced Biosystems · doi:10.1002/adbi.201700161 · Cited by 9
APPLICATION OF CELLULOSE DERIVATIVES IN EXPERIMENTAL SUR-GERY OF PARENCHYMAL ORGANS
Липатов, В. А., Kudryavtseva, T. N., & Северинов, Д. А. (2020) · Nauka molodykh (Eruditio Juvenium) · doi:10.23888/hmj202082269-283 · Cited by 9
“Чем выше вязкость среды, тем больше водоудерживающая способность вещества, такой же эффект наблюдается при увеличении содержания Na-КМЦ в композиции [34].”
Pharmacokinetic Advantage of ASD Device Promote Drug Absorption through the Epicardium
Mikrani, R., Li, C., Naveed, M., Li, C., Baig, M. M. F. A., Zhang, Q., Wang, Y., Peng, J., Zhao, L., & Zhou, X. (2020) · Pharmaceutical Research · doi:10.1007/s11095-020-02898-6 · Cited by 9
Anjum, R., Nishida, K., Matsumoto, H., Murakami, D., Kobayashi, S., Anada, T., & Tanaka, M. (2021) · Coatings · doi:10.3390/coatings11040461 · Cited by 9
“Coatings on implanted biomaterials play a pivotal role in regulating biological reactions after implantation [1,2].”
BackgroundMarin, A., Brito, J., Sukhishvili, S. A., & Andrianov, A. K. (2021) · ACS Applied Bio Materials · doi:10.1021/acsabm.1c01099 · Cited by 9
Flexural bending to approximate cortical forces exerted by electrocorticography (ECoG) arrays
Witham, N. S., Reiche, C. F., Odell, T., Barth, K. J., Chiang, C., Wang, C., Dubey, A., Wingel, K., Devore, S., Friedman, D. J., et al. (2022) · Journal of Neural Engineering · doi:10.1088/1741-2552/ac8452 · Cited by 9
“The novel LCP ECoG array was composed of an LCP-TF circuit molded in silicone to create a low-profile, highly flexible device [16, 27 – 30].”
Kimura, T., Kondo, M., Hashimoto, Y., Fujisato, T., Nakamura, N., & Kishida, A. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b01536 · Cited by 9
Zamani, E., Yahyaei, H., & Zamani, M. (2021) · Journal of Polymer Research · doi:10.1007/s10965-021-02478-1 · Cited by 9
Teo, A. J. T., Li, K. H. H., Tan, S. H., & Yoon, Y. (2017) · Journal of Micromechanics and Microengineering · doi:10.1088/1361-6439/aa687d · Cited by 9
“Motion detection is commonplace in many industries and fields [1, 2], with many different methods developed for it, such as piezoresistive [3], piezoelectric [4], electrostatic [5], electromagnetic [6] and optical methods [7, 8].”
BackgroundSelf-citationBiocompatible Polymers and Their Applications
Sharma, S. C., Aiswarya, T., Mirza, I., & Saha, S. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-820352-1.00044-4 · Cited by 14
Chen, Y., Guo, Y., Li, X., Chen, Y., Wang, J., Qian, H., Wang, J., Wang, Y., Hu, X., Wang, J., et al. (2024) · Biomaterials Science · doi:10.1039/d4bm00158c · Cited by 9
Okasha, R. M., Mohamed, A. H., Elhenawy, A. A., Alsehli, M., Alsaedi, W. H., Al-blewi, F. F., Assirey, E. A. R., Alawad, M. O., Aljohani, F. S., Hrytani, Z., et al. (2025) · Scientific Reports · doi:10.1038/s41598-025-94665-z · Cited by 11
Inverse design of interpenetrating phase composites with targeted stiffness through deep learning
Wang, K., & Gao, X.-L. (2025) · Mechanics of Materials · doi:10.1016/j.mechmat.2025.105399 · Cited by 9
Surface design strategies of polymeric biomedical implants for antibacterial properties
Meier, E. L., & Jang, Y. (2023) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2023.100448 · Cited by 8
Lu, Q., Zou, F., Chen, Z., Sathishkumar, G., Zhao, D., Liu, Y., Liu, H., Zhang, Y., Lu, Z., Kang, E. T., et al. (2023) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2023.108010 · Cited by 8
Zhang, T., Gai, K., Li, R., Liang, Y., Li, L., Chen, J., & Nie, M. (2024) · Journal of Materials Chemistry B · doi:10.1039/d3tb02402d · Cited by 8
Seregina, T. S., Shelomentsev, I., Krivoborodov, E. G., Vaniushenkova, A., Toropygin, I. Y., Dyatlov, A. V., Lukashov, N., & Dyatlov, V. A. (2024) · Biomacromolecules · doi:10.1021/acs.biomac.4c00268 · Cited by 9
A bioinspired design approach for biomechanically matched tracheal stents
Tian, L., Zhan, N., He, H., Jiang, Y., Luan, C., Feng, S., Fu, J., He, Y., Ye, J., & Yao, X. (2024) · Virtual and Physical Prototyping · doi:10.1080/17452759.2024.2437510 · Cited by 9
“TPU and silicone have good long-term biocompatibility and are widely used in medical implants [23,27–30].”
Thermoresponsive Transient Radio Frequency Antennas: Toward Triggered Wireless Transient Circuits
Zhang, X., Weber, C. M., & Bellan, L. M. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900528 · Cited by 8
Flexible Wirelessly Powered Implantable Device
Checa, G. G., Uke, K., Sohail, L., Das, R., & Heidari, H. (2019) · IEEE International Conference on Electronics, Circuits and Systems (ICECS) · doi:10.1109/icecs46596.2019.8964995 · Cited by 9
Angayarkanni, S. A., Kampf, N., & Klein, J. E. (2020) · Langmuir · doi:10.1021/acs.langmuir.0c02956 · Cited by 9
Wang, Z., Guo, Y., & Zhang, P. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2021.112267 · Cited by 8
Future Direction of Designing Antioxidant Polymers in Modulating Protein Aggregation Process
Mondal, A., Khan, M. E. H., Ghosh, P., & De, P. (2021) · Journal of Molecular and Engineering Materials · doi:10.1142/s2251237321400013 · Cited by 8
Toxicity of metals released from implanted medical devices
Brown, R. P., Fowler, B. A., Fustinoni, S., Max Costa, & Nordberg, M. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-823292-7.00003-6 · Cited by 8
divya, D. D., Dastidar, M. G., Mahapatra, S., Kumari, R., Dkhar, D. S., Roy, S., & Chandra, P. (2023) · Microchemical Journal · doi:10.1016/j.microc.2023.108431 · Cited by 8
Kausar, A. (2020) · Materials Research Innovations · doi:10.1080/14328917.2020.1812928 · Cited by 8
Resende, G., Dutra, G. V. S., Neta, M. D. S. B., Araújo, O. A., Chaves, S. B., & Machado, F. (2020) · Polymers · doi:10.3390/polym12122868 · Cited by 8
“low cytotoxicity, flexibility, biodegrability, porosity, and controlled morphology, among others [1,2].”
BackgroundTailoring Dynamic Chains of Cross‐Linked PDMS to Hinder Oil Penetration
Hao, R., Jing, H., Wang, Q., Han, Y., Zhang, Z., Li, Z., Yin, C., Li, L., Zhang, R., Sun, J., et al. (2024) · Advanced Materials Technologies · doi:10.1002/admt.202401176 · Cited by 7
Kleybolte, M. M., Vogt, C. P., & Winnacker, M. (2025) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202500021 · Cited by 7
Reimagining Orthopaedic Implants: Mechanobiochemical Innovations to Overcome Stress Shielding
Paul, A. R., Mehla, S., Mazur, M., Brandt, M., Choong, P., & Bhargava, S. K. (2026) · Progress in Materials Science · doi:10.1016/j.pmatsci.2026.101682 · Cited by 10
Kuo, C. J., Wang, H., Prasannan, A., Lai, J., Wang, J.-S., Chang, H., & Tsai, H.-C. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.109058 · Cited by 8
Nanobiomaterials for medical devices and implants
Agrawal, A. A., Pawar, K. A., Ghegade, V. N., Kapse, A. A., & Patravale, V. B. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-819469-0.00008-3 · Cited by 7
Yeboah, I. B., Hatekah, S. W. K., Yaya, A., & Kan‐Dapaah, K. (2022) · Nanomaterials · doi:10.3390/nano12060955 · Cited by 7
“Some of the most commonly used polymeric implants include silicone rubbers, polyethylenes, polyetheretherketones (PEEK) and bioabsorbables-polylactic acid (PLA), polyglycolic acid (PGA) and their copolymers and Teflon [25,39,40].”
BackgroundBioactive Zn-0.6Cu thin sheet for craniofacial bone repair: In vitro and in vivo evaluations
Xiao, Y., Zhuang, D., Chen, F., Li, T. X., Wang, H., Zhong, Y., Luo, C., Chen, J., Yao, W., & Chen, W. (2023) · APL Materials · doi:10.1063/5.0166259 · Cited by 7
Polymers in medical devices and pharmaceutical packaging
Shenoy, S. R., Wagdarikar, M. J., & Desai, N. D. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95496-9.00009-0 · Cited by 9
Novel constitutive models, challenges and opportunities of shape memory polymer composites
Uyan, M., & Çeliktaş, M. S. (2024) · Emerging Materials Research · doi:10.1680/jemmr.23.00116 · Cited by 9
The potential of silk fibroin as a polymer composite reinforcement for bone implant materials
Purnomo, P., Setyarini, P. H., & Mukaromah, A. H. (2018) · MATEC Web of Conferences · doi:10.1051/matecconf/201820405017 · Cited by 7
Mukherjee, S., Martı́nez-González, J. Á., & Gowen, A. (2018) · The Analyst · doi:10.1039/c8an01768a · Cited by 7
Synthesis Strategies for Biomedical Grade Polymers
Mulchandani, N., & Katiyar, V. (2020) · Materials horizons · doi:10.1007/978-981-15-1251-3_1 · Cited by 7
Esquivel-Lozano, Y. A., López‐Saucedo, F., & Bucio, E. (2021) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2021.109813 · Cited by 7
Sangam, S., Garg, P., Sanyal, T., Pahari, S., Khurana, S. M. P., & Mukherjee, M. (2022) · Springer eBooks · doi:10.1007/978-981-16-6819-7_20 · Cited by 10
Włodarczyk, J., Musiał‐Kulik, M., Jelonek, K., Stojko, M., Karpeta‐Jarząbek, P., Pastusiak, M., Janeczek, H., Dobrzyński, P., Sobota, M., & Kasperczyk, J. (2022) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2022.122113 · Cited by 8
Emerging trends in the development of flexible optrode arrays for electrophysiology
Almasri, R. M., Ladouceur, F. J., Mawad, D., Esrafilzadeh, D., Firth, J., Lehmann, T., Poole-Warren, L. A., Lovell, N. H., & Abed, A. A. (2023) · APL Bioengineering · doi:10.1063/5.0153753 · Cited by 7
An Implantable Piezofilm Middle Ear Microphone: Performance in Human Cadaveric Temporal Bones
Zhang, J. Z., Graf, L., Banerjee, A., Yeiser, A., McHugh, C. I., Kymissis, I., Lang, J. H., Olson, E. S., & Nakajima, H. H. (2024) · Journal of the Association for Research in Otolaryngology · doi:10.1007/s10162-024-00927-4 · Cited by 7
“While PVDF is FDA-approved [15], we disregarded the biocompatibility of certain other materials as the goal of this study was to prove feasibility.”
Plasma-Generated Poly(allyl alcohol) Antifouling Coatings for Cellular Attachment
Watkins, L. M., Lee, A. F., MOIR, J. W. B., & Wilson, K. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00705 · Cited by 7
Overview of sterilization methods for UHMWPE through surface analysis
Rodrigues, M. M., Baldin, E. K., Fontoura, C. P., Leidens, L. M., Barbieri, R. A., Frassini, R., Malfatti, C. D. F., Roesch‐Ely, M., Figueroa, C. A., & Aguzzoli, C. (2020) · Materials Advances · doi:10.1039/d0ma00772b · Cited by 7
EVOLUTION OF CONTRACEPTIVE IMPLANTS: A REVIEW
Wathoni, N., Alfauziah, T. Q., & Rantika, N. (2018) · International Journal of Applied Pharmaceutics · doi:10.22159/ijap.2018v10i6.28391 · Cited by 9
“Silicone is an inert compound used in various applications and forms [47].”
BackgroundMethodInfluentialWang, L., Liu, Z., Qiu, T., Deng, L. J., Zhang, Y., & Wang, X. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.03.138 · Cited by 6
Advancements in biodegradable implants: evaluation in large animal surgical models
Lata, S., Mondal, S., Mishra, R., Priya, S., Deshwal, R. K., Thapliyal, S., Talukdar, N., Dhasmana, A., Rustagi, S., Bora, J., et al. (2025) · Annals of Medicine and Surgery · doi:10.1097/ms9.0000000000003578 · Cited by 6
“Polymers are the most focused and utilized biomaterial among all the types due to their tailored, cutting-edge properties, including acceptable mechanical, physical, and biochemical properties [ 36 ] .”
Additive manufacturing of vitrimers: Interplay between polymer physics and processing approaches
Das, A., Sarmah, A., Luster, L. E., Green, M. J., & Bortner, M. J. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.170221 · Cited by 6
Controlled swelling of biomaterial devices for improved antifouling polymer coatings
Jesmer, A. H., Marple, A. S. T., & Wylie, R. G. (2023) · Scientific Reports · doi:10.1038/s41598-023-47192-8 · Cited by 6
“Polydimethylsiloxane (PDMS, silicone) is a widely used elastomer for implanted biomaterials 1 such as catheters, cosmetic and reconstructive implants, and implanted sensors.”
Romero, L. M., Palacio, D. A., Esquivel, S. E., Sánchez‐Sanhueza, G., Montaño, M. C., Rojas, D., Jaramillo, A. F., Medina, C., Montalba, C., & Melendrez, M. F. (2024) · Polymer · doi:10.1016/j.polymer.2024.127795 · Cited by 9
Alexopoulou, A., Pergantis, P., Koutsojannis, C. M., Triantafillou, V., & Drigas, A. S. (2025) · Sensors · doi:10.3390/s25051342 · Cited by 28
“Among the others, the development of interactive behaviours is noticeably enhanced in these environments while at the same time the CNS is activated, and significant cognitive and motor improvements can occur due to neuroplasticity [29].”
Sakamoto, M., Miyake, D., Hara, M., Liang, X., Nakajima, K., Hoshino, T., & Takeoka, Y. (2025) · Macromolecules · doi:10.1021/acs.macromol.4c03082 · Cited by 7
Cunningham, A. J., Feng, X., Zhang, H., Banquy, X., Chain, J. L., & Zhu, X.-X. (2021) · Materials Today Communications · doi:10.1016/j.mtcomm.2021.102816 · Cited by 6
Ekambaram, R., Saravanan, S., & Dharmalingam, S. (2022) · Biomedical Physics & Engineering Express · doi:10.1088/2057-1976/ac7d76 · Cited by 7
Gao, Y., Song, X., Liu, Z., Liu, M., Li, D., & Zhao, M. (2023) · Vacuum · doi:10.1016/j.vacuum.2023.112631 · Cited by 6
Hentschel, L., Petersmann, S., Kynast, F., Schäfer, U., Holzer, C., & González-Gutiérrez, J. (2023) · Polymers · doi:10.3390/polym15183785 · Cited by 7
“Furthermore, the variety of materials for such applications has significantly increased since new materials are being developed and validated consistently for 3D printing, provided in different shapes such as granules, filaments, viscous resins, or powders suiting the different AM methods [5–7].”
Properties and adsorption mechanism of biological contaminants by carbon nanotubes
Marghade, D. T., & Karunanidhi, D. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-18524-3.00012-x · Cited by 6
Sharma, S., Mudgal, D., & Gupta, V. (2024) · Biopolymers · doi:10.1002/bip.23600 · Cited by 6
Ortega, A., Melendez‐Ortiz, H. I., García‐Uriostegui, L., & Ávila‐Soria, G. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45745 · Cited by 6
Impallomeni, G., Mineo, P., Vento, F., & Ballistreri, A. (2020) · Polymer International · doi:10.1002/pi.6141 · Cited by 6
García‐Peñas, A., Wang, Y., Mena-Palomo, I., López‐Collazo, E., Díaz‐García, D., Gómez‐Ruiz, S., & Stadler, F. J. (2020) · Polymer Testing · doi:10.1016/j.polymertesting.2020.107046 · Cited by 6
Selection of green composite materials for orthopedic prosthesis using analytical hierarchy process
Khalid, R., Jayamani, E., Soon, K. H., Hari Prashanth, P. V. S., Jeyanthi, S., & Sankar, R. R. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.05.063 · Cited by 6
Facile method for immobilization of protein on elastic nanofibrous polymer membranes
Roh, S., Lee, K., Jung, Y., & Yoo, J. H. (2023) · Frontiers in Materials · doi:10.3389/fmats.2023.1141154 · Cited by 7
“), polymers are the most widely used for biomedical applications due to their biocompatible nature and relatively inexpensive cost when compared to metals and ceramics (Teo et al., 2016; Morelli and Hawker, 2021).”
BackgroundKerner, J., & von Recum, H. A. (2020) · SSRN Electronic Journal · doi:10.1101/2020.11.10.374900 · Cited by 7
Lin, J., Tung, P., Tsai, W., Setyatama, N. E., Lin, T., Kuo, C., Lin, B., Lin, H., Yeh, T. J., & Wang, Y.-C. (2023) · Journal of Materials Chemistry C · doi:10.1039/d2tc05244j · Cited by 5
Metadata
- Authors
- Teo, A. J. T., Mishra, A., Park, I., Kim, Y.-J., Park, W.-T., & Yoon, Y.-J.
- Affiliations
- Nanyang Technological University (SG)
- Korea Advanced Institute of Science and Technology (KR)
- Seoul National University of Science and Technology (KR)
- Corresponding author
- Park, Woo-Tae
- Yoon, Yong-Jin
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-03-04
- Volume
- 2
- Issue
- 4
- Pages
- 454-472
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W2335675049
- Cited by
- 778
- References
- 149
- Citations by year
- 2026: 46 · 2025: 90 · 2024: 107 · 2023: 85 · 2022: 84 · 2021: 93 · 2020: 81 · 2019: 75 · 2018: 65 · 2017: 44 · 2016: 8
- FWCI
- 26.15
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Biomaterials Science & Engineering (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Ministry of Education - Singapore (RG35/12, RGC4/13)
- Science and Engineering Research Council, Agency for Science, Technology and Research (SERC1121770039)
- National Research Foundation of Korea funded by the Ministry of Science, ICT & Future Planning (NRF-2013M2A2A9043274)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Synthesis and properties of polymers
- Keywords
- polymeric biomaterials, biomedical implants, biocompatible polymers, device packaging, polymer substrates, polyvinylidene fluoride, polyethylene, polypropylene, polydimethylsiloxane, parylene, polyamide, polytetrafluoroethylene, poly(methyl methacrylate), polyimide, polyurethane, liquid crystalline polymers, polymer nanocomposites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.