Polymeric Biomaterials for Medical Implants and Devices
The DOI matches its Crossref record; 147 of the 149 references it cites were found in a registry or an index.
Abstract
In this review article, we focus on the various types of materials used in biomedical implantable devices, including the polymeric materials used as substrates and for the packaging of such devices. Polymeric materials are used because of the ease of fabrication, flexibility, and their biocompatible nature as well as their wide range of mechanical, electrical, chemical, and thermal behaviors when combined with different materials as composites. Biocompatible and biostable polymers are extensively used to package implanted devices, with the main criteria that include gas permeability and water permeability of the packaging polymer to protect the electronic circuit of the device from moisture and ions inside the human body. Polymeric materials must also have considerable tensile strength and should be able to contain the device over the envisioned lifetime of the implant. For substrates, structural properties and, at times, electrical properties would be of greater concern. Section 1 gives an introduction of some medical devices and implants along with the material requirements and properties needed. Different synthetic polymeric materials such as polyvinylidene fluoride, polyethylene, polypropylene, polydimethylsiloxane, parylene, polyamide, polytetrafluoroethylene, poly(methyl methacrylate), polyimide, and polyurethane have been examined, and liquid crystalline polymers and nanocomposites have been evaluated as biomaterials that are suitable for biomedical packaging (section 2). A summary and glimpse of the future trend in this area has also been given (section 3). Materials and information used in this manuscript are adapted from papers published between 2010 and 2015 representing the most updated information available on each material.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Apart from the conductive functional materials, the insulative packaging materials are also a critical part of sensing recorders. Many popular insulating soft materials have been used for packaging sensing electrodes,[318] such as PI,[319,320] PDMS,[321,322] hydrogel,[323,324] etc., as they have suitable mechanical, dielectric and biological properties.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [318]
Citations
Cites
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Vepari, C., & Kaplan, D. L. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.013 · Cited by 2,561
The piezoelectricity of poly (vinylidene fluoride)
Kawai, H. (1969) · Japanese Journal of Applied Physics · doi:10.1143/jjap.8.975 · Cited by 2,044
Biomedical applications of polymer-composite materials: a review
Ramakrishna, S., Mayer, J., Wintermantel, E., & Leong, K. W. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00241-4 · Cited by 1,642
A review of stimuli-responsive shape memory polymer composites
Meng, H., & Li, G. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.023 · Cited by 1,190
Superconductivity in 4 Angstrom Single-Walled Carbon Nanotubes
Tang, Z. K., Zhang, L., Wang, N., Zhang, X. X., Wen, G. H., Li, G. D., Wang, J. N., Chan, C. T., & Sheng, P. (2001) · Science · doi:10.1126/science.1060470 · Cited by 816
Ambulatory esophageal pH monitoring using a wireless system
Pandolfino, J. (2003) · The American Journal of Gastroenterology · doi:10.1016/s0002-9270(03)00062-5 · Cited by 528
Hassler, C., Boretius, T., & Stieglitz, T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22169 · Cited by 501
Polyurethanes in Biomedical Applications
Burke, A., & Hasirci, N. (2004) · Advances in Experimental Medicine and Biology · doi:10.1007/978-0-306-48584-8_7 · Cited by 494
Development of Implantable Medical Devices: From an Engineering Perspective
Joung, Y.-H. (2013) · International Neurourology Journal · doi:10.5213/inj.2013.17.3.98 · Cited by 367
Research works printed but not linked: 14
- Kammula R. G., 2001, Med. Device Diagn. Ind., 23, 82
- Register O. o. t. F., 2010, Code of Federal Regulations, Title 21, Food and Drugs, Pt. 800–1299, Revised as of April 1, 2010
- Kim J., 2012, 5th European Conference of the International Federation for Medical and Biological Engineering, 1214
- Kuo A., 1999, Polymer Data Handbook
- 10.7537/j.issn.1545-1003 · doi:10.7537/j.issn.1545-1003
- Jeong J., 2012, Sens. Mater., 24, 189
- 10.1111/j.1572-0241.2003.07398.x · doi:10.1111/j.1572-0241.2003.07398.x · Paper page
- Chang J. H.-C., 2014, IEEE 27th International Conference onMicro Electro Mechanical Systems (MEMS), 1127
- Dutta S. R. B., 2013, Int. J. Rec. Sci. Res., 4, 1661
- Kirsten S., 2012, 35th International Spring Seminar on Electronics Technology (ISSE), 123
- de Beeck M. O., 2013, 2013 European Microelectronics Packaging Conference (EMPC), 1
- Imenes K., 2012, 4th Electronic System-Integration Technology Conference (ESTC), 1
- Kubyshkina G., 2011, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, 3, 11
- Sundaram V., 2011, Proceedings of the 61st IEEE Electronic Components and Technology Conference (ECTC), 1308
Cited by
Items 601–700 of 776
Chitosan as a biomaterial for implantable drug delivery
Shukla, R., Mishra, P., Handa, M., Hasnain, M. S., & Beg, S. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-819336-5.00003-0 · Cited by 2
An Implantable Umbo Microphone For Fully-Implantable Assistive Hearing Devices
Cary, B. G., Zhang, J. Z., McHugh, C. I., Kymissis, I., Olson, E. S., Nakajima, H. H., & Lang, J. H. (2021) · Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ... · doi:10.1109/sensors47087.2021.9639746 · Cited by 3
“A polyvinylidene difluoride (PVDF) film is chosen for implantable-microphone signal transduction for its piezoelectric characteristics, and because it is FDA approved for other implantable devices [9].”
BackgroundSynthesis of hollow fibroin using calcium carbonate as a template
Park, B., Ramesh, S. K., Rhee, S. W., & Kim, J. (2022) · Bulletin of the Korean Chemical Society · doi:10.1002/bkcs.12659 · Cited by 2
Bochenek, M., Oleszko-Torbus, N., Kowalczuk, M. M., & Wałach, W. (2023) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112116 · Cited by 2
SmartLact8: A Bio-Inspired Robotic Breast Pump for Customized and Comfort Milk Expression
Li, Y., Lozano, M. V., Peña, D., Gulati, I. K., & Jiang, L. H. (2023) · Biomimetics · doi:10.3390/biomimetics8020190 · Cited by 2
“The material we used is platinum silicone, which is a medically approved material that is semi translucent and safe for human interaction [31].”
Modeling and Analysis of Finger Splint for Mild to High-Grade Mallet Finger Fracture
Bansal, S., Tripathi, A., Kumar, N., Singh, T., & Ranganath, M. S. (2023) · Evergreen · doi:10.5109/6793665 · Cited by 2
Raffi, N. M., Vijayanand, M., & Sivamani, S. (2024) · Bulletin of Materials Science · doi:10.1007/s12034-023-03116-w · Cited by 2
Novel anti-reflux ureteral skirt: proof of concept in a Yorkshire-Landrace pig model
Lu, Y., Tay, J., Lim, K. S., & Ng, L. G. (2024) · World Journal of Urology · doi:10.1007/s00345-024-05157-0 · Cited by 2
Mechanical properties and molecular adhesion exhibited by inorganic–organic composite elastomers
Yamashita, N., Ikura, R., Yamaoka, K., Kato, N., Kamei, M., Ogura, K., Igarashi, M., Nakagawa, H., & Takashima, Y. (2024) · Polymer Chemistry · doi:10.1039/d4py00879k · Cited by 2
Vargas-Machado, P. J., López‐Saucedo, F., & Bucio, E. (2025) · Polymers · doi:10.3390/polym17050612 · Cited by 2
“Polymer materials are widely used in various biomedical fields, including implants, prostheses, pacemaker parts, suture threads, gauze, and catheters [1,2].”
Poly(Lactic Acid) Blends in Biomedical Applications
Bennie, R. B., Joel, C., Abraham, S. D., & Antony, A. J. (2025) · Advanced structured materials · doi:10.1007/978-3-031-90979-5_2 · Cited by 2
In-situ photoelastic examination of brittle fracture in notched glassy polymers
Gupta, C., Siavoshani, A. Y., & Wang, S. (2025) · Polymer · doi:10.1016/j.polymer.2025.128929 · Cited by 2
Development of collagen-based hydrogel derived from allicin-silver nanoparticles for wound healing
Subashini, R., Tabbasum, M. T., Ah, D., & Shakti Varsha, S. (2025) · Die Naturwissenschaften · doi:10.1007/s00114-025-02017-8 · Cited by 3
“Previous studies on biodegradable polyesters suggest that nanocomposite materials can improve swelling characteristics (Teo et al. 2016; Manavitehrani et al. 2016).”
Review Article New Generation Surgical Sutures
Gokarneshan, N. (2018) · Global Journal of Otolaryngology · doi:10.19080/gjo.2018.15.555932 · Cited by 2
“Application of polymeric biomaterials in medicine has been a thrust area of research owing to the exceptional and superior properties they exhibit [4].”
BackgroundFauzi, A. A. A., Osman, A. F., Halim, K. A. A., Mustafa, Z., Alakrach, A. M., & Salleh, M. N. (2021) · Journal of Physics Conference Series · doi:10.1088/1742-6596/2080/1/012029 · Cited by 2
Interactions at Interface between Nanomaterial’s and Biofilm: A General Survey
Lahir, Y. H. (2020) · Advances in Clinical Toxicology · doi:10.23880/act-16000192 · Cited by 2
Dielectric Hydrogels: Materials for Sustainable Energy Storage
Shimoga, G. D. (2017) · Research & Development in Material Science · doi:10.31031/rdms.2017.01.000526 · Cited by 2
“The discovery, development and deployment of new polymeric materials given a new dimension to the present era, this young branch of chemistry, has been the subject of great development both as a basic and applied science provides new business opportunities as well as to drive advances in high value application ranging…”
BackgroundYue, S., Qiu, Y., & Moussa, W. A. (2018) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2018.2810738 · Cited by 2
Preparation of Calcium Phosphate/Chitosan Granules
Голованова, О. А. (2021) · Inorganic Materials · doi:10.1134/s0020168521090090 · Cited by 2
“An important place among biomaterials is occupied by metals and inorganic and carbon compounds [2], but significant advances in the field of medical biomaterials have stimulated the development of new substances whose major components are polymers [3, 4].”
BackgroundApplication of nanotechnology assisted devices in cancer treatment
Handa, M., Dey, M., Saxena, A., Beg, S., Rahman, M., & Shukla, R. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-823686-4.00004-5 · Cited by 2
FILM-FORMING COMPOSITIONS BASED ON POLYURETHANEUREAS WITH EXTENDED RELEASE OF DACARBAZINE
Prymushko, S. O., Galatenko, N. А., Rozhnova, R. A., Kozlova, G. A., Gladyr, I. I., & Nechaeva, L. Y. (2023) · Polymer journal · doi:10.15407/polymerj.45.04.319 · Cited by 2
Javid, A., Irshad, A., Ashraf, M., Rehman, A., Riaz, S., & Iqbal, K. (2019) · Pigment & Resin Technology · doi:10.1108/prt-08-2019-0068 · Cited by 2
Effect of particles size of zirconia on the mechanical behavior of the polymer blend
Mahboba, M. H., Sallal, H. A., & Ali, F. H. (2020) · AIP conference proceedings · doi:10.1063/5.0002888 · Cited by 2
Foreign body reaction (immune respond) for artificial implants can be avoidedPreprint
Kondyurina, I. V., & Kondyurin, A. V. (2019) · arXiv (Cornell University) · doi:10.48550/arxiv.1905.02500 · Cited by 2
“FBR would significantly improve the implant’s capacity to save life. However, despite how all modern implants satisfy physical and chemical stability, non-immunogenicity and non-toxicity requirements [16], all these implants still cause an immune response in an organism. This is why there is a widely held opinion that…”
BackgroundSelf-Healing Polymers for Biomedical Applications
Shabani, I., Daraeinejad, Z., & Ghofrani, R. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-815732-9.00042-5 · Cited by 2
A Review on Health Care Applications of Biopolymers
Vijesh, A. M., & Isloor, A. M. (2022) · Wiley eBooks · doi:10.1002/9781119905301.ch15 · Cited by 3
Bondaruk, O., & Karabanova, L. V. (2022) · Polymer journal · doi:10.15407/polymerj.44.01.003 · Cited by 1
Takefuji, H., Iwama, H., Annaka, M., & Yashima, S. (2022) · Tribology Letters · doi:10.1007/s11249-022-01672-6 · Cited by 1
“Biocompatibility, mechanical properties, and durability are issues and evaluation points that must be considered in order to apply hydrogels as biomaterials [6, 7].”
BackgroundNaturally derived ceramics–polymer composite for biomedical applications
Shinyjoy, E., Ramya, S., Saravanakumar, P., Manoravi, P., Kavitha, L., & Gopi, D. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-88524-9.00012-7 · Cited by 4
Market access of implants: Regulatory framework and ethical issues
Antich-Isern, P., Caro-Barri, J., & Aparicio-Blanco, J. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-99690-7.00006-6 · Cited by 1
Block copolymer for skin-compatible electronics
Zhong, Y., Tao, Z., & Han, J. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95105-0.00009-7 · Cited by 1
Polyurethane nanocomposite foams: Preparation, properties and applications
Kausar, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-99452-1.00017-6 · Cited by 1
Ji, Y., Liao, G., Yuan, W., Jia, Y., Zhang, Y., Mei, Z., Liu, G., Cheng, H., Ke, Y., Han, Z., et al. (2025) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c03659 · Cited by 1
Polylactic Acid Based Rubber Composites and Nanocomposites
Navaneethan, K. M., Shanmugam, D., Palanisamy, S., & Krishnamoorthy, A. (2025) · Advanced structured materials · doi:10.1007/978-3-031-78557-3_7 · Cited by 2
Cusanno, A., & Piccininni, A. (2025) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-025-15504-z · Cited by 1
“The former classification leads to the groups of metallic [2], polymeric [3], ceramics [4], composites [5], and biological-origin biomaterials [6] The latter categorization allows to differentiate bioinert from biodegradable materials in terms of how much the properties are altered by the contact…”
dos Santos, M. D. S., Vieira, Í. R. S., Cesca, K., Calado, C. M. B., & Quadri, M. G. N. (2025) · Polymer Bulletin · doi:10.1007/s00289-025-05836-x · Cited by 1
“Materials with higher tensile strength are chosen for biomedical applications when structural maintenance under continuous mechanical stress is required, such as in orthopedic implants, vascular stents, and tissue engineering [56, 57].”
Meurs, J., Nasir, A., Figueredo, G. P., Burroughs, L., Abdelrazig, S., Denning, C. N., Winkler, D. A., Barrett, D. A., Kim, D., & Alexander, M. R. (2025) · Analytical Chemistry · doi:10.1021/acs.analchem.5c01636 · Cited by 1
Biomedical Applications of Natural and Synthetic Polymers: A Mechanical Perspective
Menagadevi, M., Nirmala, M., & Thiyagarajan, D. (2025) · Biomedical Materials & Devices · doi:10.1007/s44174-025-00515-x · Cited by 3
Feng, J., Krumpolec, R., Stupavská, M., Ksenzova, O., Kováčik, D., & Černák, M. (2025) · Vacuum · doi:10.1016/j.vacuum.2025.114861 · Cited by 1
Casares-López, J. M., Hierro‐Oliva, M., González-Martín, M. L., & Gallardo-Moreno, A. M. (2025) · Applied Surface Science · doi:10.1016/j.apsusc.2025.165469 · Cited by 1
Hariharan, K., Sastry, C. C., Sathishkumar, N., & Saravanan, K. (2025) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2025.131906 · Cited by 1
S., F. P., & Suthindhiran, K. (2026) · Frontiers in Cellular and Infection Microbiology · doi:10.3389/fcimb.2026.1750702 · Cited by 2
“Their production relies heavily on biomaterials, including metals, alloys, ceramics, polymers, and composites, which are selected for their mechanical strength, durability, and biocompatibility (Teo et al., 2016; Narayana and Srihari, 2019; Ramezani and Ripin, 2023).”
Inter‐Crystal Spacing of Implantable Polymeric Surfaces as a Key Suppressor of Microbial Adhesion.
Lee, K. S., Kim, Y., Kim, J., Cho, S., Kim, D., & Sung, H. M. (2026) · Small · doi:10.1002/smll.202509495 · Cited by 1
Self-citationHashemi, M. R., Sirjani, S., Jamalpour, M., & Alizadeh, R. (2026) · Results in Engineering · doi:10.1016/j.rineng.2026.110255 · Cited by 1
Biomedical Implants and Applications: Current Innovative Materials and Regenerative Solutions
Palta, P., Palta, A., & Kumar, V. (2026) · Global Clinical Engineering Journal · doi:10.31354/globalce.v8i1.370 · Cited by 1
Distant Transport of Antimicrobial Protection by Implantable Polymeric Meshes
Mohammadi, S., Lourenço, A. L. P., Maranesi, A., Spasiano, C., Zambelli, T., CECCHINI, M., & Ferrari, A. (2026) · Macromolecular Materials and Engineering · doi:10.1002/mame.70220 · Cited by 1
“The textile composition directly affects the mesh surface roughness and intrinsic yarn porosity [ 11, 12 ], whereas the polymer selection determines the degradation profile and the expected tissue response [ 4 ].”
Kalashnikov, N., Thareja, R., & Vorstenbosch, J. (2026) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.70096 · Cited by 2
Ghasemi, H., Kamrani, E., Homaei, A. A., Zarei, M., & Fernandes, P. (2026) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2026.115912 · Cited by 1
Crago, M., Giaretta, J., Pathan, A. N., Ospina-Yepes, Y., Eagan, J. M., Serrani, M., Stasiak, J., Moggridge, G. D., Pinchuk, L., & Naficy, S. (2026) · ACS Applied Polymer Materials · doi:10.1021/acsapm.6c00585 · Cited by 1
Maintenance of Endothelial Cell Function in Liquid Based Antithrombotic Surface Coating
Chu, H., Yao, J., Zhang, T., Yip, M. C., Dhara, M., Min, J. K., Dunham, S. N., & Mosadegh, B. (2017) · Biology and Medicine · doi:10.4172/0974-8369.1000418 · Cited by 1
“TCPS is used as the gold standard for growth of these cells; however, PDMS is a more representative material for comparison, since it is frequently used in microfluidic cell culture systems and has similarities with many polymer-based medical materials [18].”
Ramanujam, S. (2019) · Pittsburg State University Digital Commons (Pittsburg State University) · Cited by 1
Next Generation Neural Interface Electronics
Williams, I., Leene, L. B., & Constandinou, T. G. (2022) · River Publishers eBooks · doi:10.1201/9781003337522-7 · Cited by 1
Gadomska‐Gajadhur, A., Kruk, A., Dulnik, J., & Chwojnowski, A. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.50089 · Cited by 1
Polymeric nanocomposites reinforced with noncovalently bonded fullerene
Kausar, A. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-99515-3.00011-0 · Cited by 1
Ionic Liquids for the Surface Modification of Polymers and Medical Devices
Sasi, R., Lathikumari, S. S., & Joseph, R. (2023) · BENTHAM SCIENCE PUBLISHERS eBooks · doi:10.2174/9789815136234123010019 · Cited by 1
Devi, M. V., K., A. D. V., HARIDOSS, P., Mani, U., Thada, R., Syamala, K. M., & Sivagnanam, U. T. (2023) · Advanced Therapeutics · doi:10.1002/adtp.202300187 · Cited by 3
Sahu, G., Rajput, M. S., & Mahapatra, S. P. (2023) · Ferroelectrics · doi:10.1080/00150193.2023.2271146 · Cited by 1
“Structural, thermal, and electrical properties would be more important considerations for packaging materials [12].”
BackgroundDo, N. B. D., Imenes, K., Aasmundtveit, K. E., Nguyen, H., & Andreassen, E. (2024) · IMAPSource Proceedings · doi:10.4071/001c.94686 · Cited by 1
Multi-material implant structures with medical-grade polyurethane via additive manufacturing
Hentschel, L., Petersmann, S., Gradischar, A., Lebschy, C., Lindenmann, J., Smolle-Juettner, F., González-Gutiérrez, J., Dias, A. A., Kynast, F., Hammer, N., et al. (2024) · AIP conference proceedings · doi:10.1063/5.0204530 · Cited by 1
Suhag, D., Kaushik, S., & Taxak, V. B. (2024) · Biomedical materials for multi-functional applications · doi:10.1007/978-981-97-4818-1_5 · Cited by 2
Foreign Body Reaction to Ion-Beam-Treated Polyurethane Implant
Chudinov, V. S., Shardakov, I. N., Литвинов, В. В., Solodnikov, S. Y., Chudinova, E. Y., Kondyurina, I. V., & Kondyurin, A. V. (2024) · Materials · doi:10.3390/ma17153833 · Cited by 2
“Also, the materials for the implant must be sterilizable by certified methods such as ethylene oxide, steam, UV irradiation, or gamma irradiation [11–16].”
MethodBiocompatible Hermetic Encapsulation of PMUTs for Usage in Implantable Medical Devices
Afshari, E., Houri, S., Verplancke, R., Rochus, V., Cauwe, M., Gijsenbergh, P., Rottenberg, X., & de Beeck, M. O. (2024) · IEEE Ultrasonics, Ferroelectrics, and Frequency Control Joint Symposium (UFFC-JS) · doi:10.1109/uffc-js60046.2024.10793944 · Cited by 1
Hydrogen end-use and transportation
Zendehboudi, S., & Ghorbani, B. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-24042-3.00005-9 · Cited by 4
López‐Saucedo, F., Gómez-Lázaro, B., Flores‐Rojas, G. G., Vázquez‐Victorio, G., Bucio, E., & Buendia-Gonzalez, L. (2025) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2025.112855 · Cited by 1
Numerical Investigation Into Bone Remodeling Around Different Co‐Polymeric Swelling Bone Anchors
Sadighi, A., Taheri, M., Black, N., Taghvaei, M., Boyes, M. S., Oeth, D., Siegler, S., Schaer, T. P., & Najafi, A. R. (2025) · International Journal for Numerical Methods in Biomedical Engineering · doi:10.1002/cnm.70054 · Cited by 2
“Compared to traditional titanium bone anchors, which often cause stress shielding and subsequent bone resorption due to their high elastic modulus [17, 95], co-polymeric swelling anchors offer a significant advantage by inducing radial stresses that promote bone remodeling and apposition.”
Physical Characterization of Multiwire Polystyrene Produced by Electrospinning Technique
Torrisi, L., Silipigni, L., Torrisi, A., Cutroneo, M., Malara, A., Fotia, A., Nunnari, C., & Frontera, P. (2025) · Polymers · doi:10.3390/polym17192587 · Cited by 1
Jiraporn, T., Klinkhamhom, A., Wanlop, L., & Nanthana, A. (2019) · International Journal of PharmTech Research · doi:10.20902/ijptr.2019.120208 · Cited by 1
A Feasibility Study on Optically Transparent Encapsulation for Implantable Neural Prostheses
Shim, S., & Kim, S. J. (2019) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/embc.2019.8857602 · Cited by 1
“Compared with metal-based encapsulation, polymers offer several advantages, including high flexibility, good electromagnetic compatibility, and applicability to microfabrication processes [1–3].”
BackgroundXu, Q. Z., Li, B., Xu, Z., Jiang, X., Yarmolenko, M. A., Rogachev, А. V., & Rogachev, A. V. (2020) · Eurasian Chemico-Technological Journal · doi:10.18321/ectj997 · Cited by 1
Advanced applications of green materials in bioelectronics applications
Yılmaz, T., & Kuş, M. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-820484-9.00024-6 · Cited by 2
Subramaniam, D. R., Oren, L., Willging, J. P., & Gutmark, E. J. (2021) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2021.1902511 · Cited by 1
Biomimetic and Collagen-based Biomaterials for Biomedical Applications
Cipolla, L. (2021) · Royal Society of Chemistry eBooks · doi:10.1039/9781839161124-00061 · Cited by 1
Sreelekshmi, P. J., Devika, V., Sreejaya, M. M., Sadanandan, S., Mathew, M. S., Saritha, A., Joseph, K., & Thomas, S. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-99291-6.00007-4 · Cited by 1
3D printing for biological applications
Ho, B. C. M. (2018) · DR-NTU (Nanyang Technological University) · doi:10.32657/10356/74578 · Cited by 1
Evolving Trends of Nanotechnology for Medical and Biomedical Applications: A Review
Bokka, S., & Chowdhury, A. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-820352-1.00098-5 · Cited by 2
Sustainable Polymer Used as Renewable Source for Medical Industry
Zarzosa, G. I. G., & Kobayashi, T. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-820352-1.00235-2 · Cited by 1
Zafar, S., Verma, N., Singh, M. K., & Pathak, H. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-820352-1.00100-0 · Cited by 1
Materials for Biocompatible Piezoelectric Devices
Chorsi, M. T., Le, T. T., Das, R., Vinikoor, T., Chorsi, H. T., Kazerounian, K., Ilieş, H., & Nguyen, T. D. (2023) · Elsevier eBooks · doi:10.1016/b978-0-12-819728-8.00100-5 · Cited by 1
Green Polymeric Materials for Medical Implantable and Non-implantable Devices
Tripathi, J. P. (2022) · Encyclopedia of Green Materials · doi:10.1007/978-981-16-4921-9_98-1 · Cited by 1
Serving a Diverse Biomaterials Community for 10 Years
Radisic, M., & Kaplan, D. L. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.4c01355 · Cited by 1
Low temperature direct bonding of polyoxymethylene (POM) through self assembly monolayer (SAM)
Fu, W., Kuwae, H., Ma, B., Shoji, S., & Mizuno, J. (2017) · International Conference on Electronics Packaging (ICEP) · doi:10.23919/icep.2017.7939349
“Recently, polymer materials have attracted much attention from body implantable micro/nano electro-mechanical systems (MEMS/NEMS) researchers [1-4].”
BackgroundFu, W., Shigetou, A., Shoji, S., & Mizuno, J. (2017) · Journal of Materials Science and Engineering B · doi:10.17265/2161-6221/2017.3-4.001
“Polymers are playing a growing role in biomedical MEMS as packaging materials because of their wide processing versatility [1-5].”
From the laboratory concept to clinical trials: the journey of Otoimplant so far
Ziąbka, M. (2018) · Expert Review of Medical Devices · doi:10.1080/17434440.2019.1557518
Biocompatibility Assessments of Surgical sutures: The Guinea Pig Maximization Test
Jiraporn, T., Masupa, J., Nanthana, A., Sirimontaporn, A., & Srimangkornkaew, P. (2019) · International Journal of PharmTech Research · doi:10.20902/ijptr.2019.120112
Raja, M., Shelton, J. C., Salamat-Zadeh, F., Tavakoli, M., Donell, S. T., Watts, G., & Vadgama, P. M. (2019) · Analytica Chimica Acta X · doi:10.1016/j.acax.2019.100009
“The integrity of polymeric materials, whether used as implants with mechanical properties [1] or barrier layers to control samplebiosensor diffusional exchange [2], are strongly influenced by hydration and later degradation.”
BackgroundSujka, W., Draczyński, Z., Rutkowski, J., Karbowski, K., Gąsiorowski, T., & Kasprzak, P. (2019) · Fibres and Textiles in Eastern Europe · doi:10.5604/01.3001.0013.1569
“Taking into consideration their physio-mechanical and chemical properties, PP is used in medical devices (surgical sutures, hernia meshes, cranial prosthesis) [22].”
BackgroundImplantable Neuroamplifers for Electrocorticography Using Flexible and Biocompatible Technology
Marcoleta, J. P., Nogueira, W., Yoma, N. B., Wuth, J., Jakimovski, F., Fuenzalida, V. M., & Doll, T. (2020) · physica status solidi (a) · doi:10.1002/pssa.201900830
Modulation of Vascular Cell Specific Growth: Electroceutical Mechanisms and Biomaterial Constructs
Ammann, K. R. (2018) · UA Campus Repository (The University of Arizona)
Development of Hybrid Materials Based on Polymers for Biomedical Applications: A Short Introduction
San-Miguel, V. (2021) · Materials research foundations · doi:10.21741/9781644901076-8
Bilgisayar Destekli Anatomik Modelleme
Bozbuğa, N., & Taş, F. (2021) · Istanbul University Press eBooks · doi:10.26650/b/et07.2021.003.24
Expanding the versatility and functionality of iontronic devices
Cherian, D. (2021) · Linköping studies in science and technology. Dissertations · doi:10.3384/diss.diva-179010
Synthesis, characterization and biological applications of biosilica based composites
Prasad, P. S., Deepa, M., Gomathi, T., & Sudha, P. N. (2021) · YMER Digital · doi:10.37896/ymer20.12/64
Wear Evaluation of Poly(vinyl alcohol) Hydrogel by UV Spectrometry and TOC Measurement of LubricantPreprint
Takefuji, H., Annaka, M., & Yashima, S. (2022) · Research Square · doi:10.21203/rs.3.rs-1300931/v1
Gwon, T. M. (2018) · Springer theses · doi:10.1007/978-981-13-0472-9_1
Sustaining our Passion for Sustainability
(2018) · Polymer International · doi:10.1002/pi.5733
Editorial on Special Issue “Biomaterials, Polymers and Tissue Engineering”
Chiulan, I. (2022) · Applied Sciences · doi:10.3390/app12126078
Lithium-Based Batteries and Their Significance to Implantable Biomedical Devices: A ReviewPreprint
Moore, E., liu, L., Ash, Z., Leonard, R. L., & Johnson, J. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4173648
Lasers in plastic processing, a big impact in the industry
Castelo‐Porta, A. (2022) · PhotonicsViews · doi:10.1002/phvs.202270507
Metadata
- Authors
- Teo, A. J. T., Mishra, A., Park, I., Kim, Y.-J., Park, W.-T., & Yoon, Y.-J.
- Affiliations
- Nanyang Technological University (SG)
- Korea Advanced Institute of Science and Technology (KR)
- Seoul National University of Science and Technology (KR)
- Corresponding author
- Park, Woo-Tae
- Yoon, Yong-Jin
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-03-04
- Volume
- 2
- Issue
- 4
- Pages
- 454-472
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W2335675049
- Cited by
- 778
- References
- 149
- Citations by year
- 2026: 46 · 2025: 90 · 2024: 107 · 2023: 85 · 2022: 84 · 2021: 93 · 2020: 81 · 2019: 75 · 2018: 65 · 2017: 44 · 2016: 8
- FWCI
- 26.15
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Biomaterials Science & Engineering (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Ministry of Education - Singapore (RG35/12, RGC4/13)
- Science and Engineering Research Council, Agency for Science, Technology and Research (SERC1121770039)
- National Research Foundation of Korea funded by the Ministry of Science, ICT & Future Planning (NRF-2013M2A2A9043274)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Synthesis and properties of polymers
- Keywords
- polymeric biomaterials, biomedical implants, biocompatible polymers, device packaging, polymer substrates, polyvinylidene fluoride, polyethylene, polypropylene, polydimethylsiloxane, parylene, polyamide, polytetrafluoroethylene, poly(methyl methacrylate), polyimide, polyurethane, liquid crystalline polymers, polymer nanocomposites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.