Polymeric Biomaterials for Medical Implants and Devices
The DOI matches its Crossref record; 147 of the 149 references it cites were found in a registry or an index.
Abstract
In this review article, we focus on the various types of materials used in biomedical implantable devices, including the polymeric materials used as substrates and for the packaging of such devices. Polymeric materials are used because of the ease of fabrication, flexibility, and their biocompatible nature as well as their wide range of mechanical, electrical, chemical, and thermal behaviors when combined with different materials as composites. Biocompatible and biostable polymers are extensively used to package implanted devices, with the main criteria that include gas permeability and water permeability of the packaging polymer to protect the electronic circuit of the device from moisture and ions inside the human body. Polymeric materials must also have considerable tensile strength and should be able to contain the device over the envisioned lifetime of the implant. For substrates, structural properties and, at times, electrical properties would be of greater concern. Section 1 gives an introduction of some medical devices and implants along with the material requirements and properties needed. Different synthetic polymeric materials such as polyvinylidene fluoride, polyethylene, polypropylene, polydimethylsiloxane, parylene, polyamide, polytetrafluoroethylene, poly(methyl methacrylate), polyimide, and polyurethane have been examined, and liquid crystalline polymers and nanocomposites have been evaluated as biomaterials that are suitable for biomedical packaging (section 2). A summary and glimpse of the future trend in this area has also been given (section 3). Materials and information used in this manuscript are adapted from papers published between 2010 and 2015 representing the most updated information available on each material.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Apart from the conductive functional materials, the insulative packaging materials are also a critical part of sensing recorders. Many popular insulating soft materials have been used for packaging sensing electrodes,[318] such as PI,[319,320] PDMS,[321,322] hydrogel,[323,324] etc., as they have suitable mechanical, dielectric and biological properties.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [318]
Citations
Cites
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Vepari, C., & Kaplan, D. L. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.013 · Cited by 2,561
The piezoelectricity of poly (vinylidene fluoride)
Kawai, H. (1969) · Japanese Journal of Applied Physics · doi:10.1143/jjap.8.975 · Cited by 2,044
Biomedical applications of polymer-composite materials: a review
Ramakrishna, S., Mayer, J., Wintermantel, E., & Leong, K. W. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00241-4 · Cited by 1,642
A review of stimuli-responsive shape memory polymer composites
Meng, H., & Li, G. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.023 · Cited by 1,190
Superconductivity in 4 Angstrom Single-Walled Carbon Nanotubes
Tang, Z. K., Zhang, L., Wang, N., Zhang, X. X., Wen, G. H., Li, G. D., Wang, J. N., Chan, C. T., & Sheng, P. (2001) · Science · doi:10.1126/science.1060470 · Cited by 816
Ambulatory esophageal pH monitoring using a wireless system
Pandolfino, J. (2003) · The American Journal of Gastroenterology · doi:10.1016/s0002-9270(03)00062-5 · Cited by 528
Hassler, C., Boretius, T., & Stieglitz, T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22169 · Cited by 501
Polyurethanes in Biomedical Applications
Burke, A., & Hasirci, N. (2004) · Advances in Experimental Medicine and Biology · doi:10.1007/978-0-306-48584-8_7 · Cited by 494
Development of Implantable Medical Devices: From an Engineering Perspective
Joung, Y.-H. (2013) · International Neurourology Journal · doi:10.5213/inj.2013.17.3.98 · Cited by 367
Research works printed but not linked: 14
- Kammula R. G., 2001, Med. Device Diagn. Ind., 23, 82
- Register O. o. t. F., 2010, Code of Federal Regulations, Title 21, Food and Drugs, Pt. 800–1299, Revised as of April 1, 2010
- Kim J., 2012, 5th European Conference of the International Federation for Medical and Biological Engineering, 1214
- Kuo A., 1999, Polymer Data Handbook
- 10.7537/j.issn.1545-1003 · doi:10.7537/j.issn.1545-1003
- Jeong J., 2012, Sens. Mater., 24, 189
- 10.1111/j.1572-0241.2003.07398.x · doi:10.1111/j.1572-0241.2003.07398.x · Paper page
- Chang J. H.-C., 2014, IEEE 27th International Conference onMicro Electro Mechanical Systems (MEMS), 1127
- Dutta S. R. B., 2013, Int. J. Rec. Sci. Res., 4, 1661
- Kirsten S., 2012, 35th International Spring Seminar on Electronics Technology (ISSE), 123
- de Beeck M. O., 2013, 2013 European Microelectronics Packaging Conference (EMPC), 1
- Imenes K., 2012, 4th Electronic System-Integration Technology Conference (ESTC), 1
- Kubyshkina G., 2011, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, 3, 11
- Sundaram V., 2011, Proceedings of the 61st IEEE Electronic Components and Technology Conference (ECTC), 1308
Cited by
Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications
Rajak, D., Pagar, D., Menezes, P., & Linul, E. (2019) · Polymers · doi:10.3390/polym11101667 · Cited by 1,706
Review on titanium and titanium based alloys as biomaterials for orthopaedic applications
Kaur, M., & Singh, K. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.04.064 · Cited by 1,451
Wickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,052
“implants as it lasts longer in the human body [40,41].”
BackgroundPerformance properties and applications of polytetrafluoroethylene (PTFE)—a review
Dhanumalayan, E., & Joshi, G. M. (2018) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-018-0023-8 · Cited by 648
Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics
Heng, W., Solomon, S., & Gao, W. (2022) · Advanced Materials · doi:10.1002/adma.202107902 · Cited by 609
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
Zhang, C., Yan, K., Fu, C., Peng, H., Hawker, C. J., & Whittaker, A. K. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00632 · Cited by 493
Multifunctional “Hydrogel Skins” on Diverse Polymers with Arbitrary Shapes
Yu, Y., Yuk, H., Parada, G. A., Wu, Y., Liu, X., Nabzdyk, C. S., Youcef‐Toumi, K., Zang, J., & Zhao, X. (2019) · Advanced Materials · doi:10.1002/adma.201807101 · Cited by 482
Recent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites
Rahim, T. N. A. T., Abdullah, A. M., & Md Akil, H. (2019) · Polymer Reviews · doi:10.1080/15583724.2019.1597883 · Cited by 452
“Therefore, until now, this polymer has still not been listed in medical implants.(73,74) Moreover, when the plastic is heated between processing temperatures, it exudes an unpleasant odor to most users and the measurement of volatile organic compounds (VOC) was recorded at 0.”
BackgroundMoisture‐Enabled Electricity Generation: From Physics and Materials to Self‐Powered Applications
Shen, D., Duley, W. W., Peng, P., Xiao, M., Feng, J., Liu, L., Zou, G., & Zhou, Y. N. (2020) · Advanced Materials · doi:10.1002/adma.202003722 · Cited by 428
A Materials Roadmap to Functional Neural Interface Design
Wellman, S. M., Eles, J. R., Ludwig, K. A., Seymour, J. P., Michelson, N. J., McFadden, W. E., Vazquez, A. L., & Kozai, T. D. Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201701269 · Cited by 389
Biobased polyurethanes for biomedical applications
Wendels, S., & Avérous, L. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.10.002 · Cited by 379
“In this way, Different polymeric materials can be used, either as coating or as plain medical devices such as polyvinylidene fluoride (PVDF), polyethylene (PE), polypropylene (PP), poly (methyl methacrylate) (PMMA) and silicone, only to cite a few of them [1].”
BackgroundTitanium Coatings and Surface Modifications: Toward Clinically Useful Bioactive Implants
Civantos, A., Martínez-Campos, E., Ramos, V., Elvira, C., Gallardo, A., & Abarrategi, A. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00604 · Cited by 338
Advances in 3D printing for polymer composites: A review
Ma, T., Zhang, Y., Ruan, K., Guo, H., He, M., Shi, X., Guo, Y., Kong, J., & Gu, J. (2024) · InfoMat · doi:10.1002/inf2.12568 · Cited by 310
Doloff, J. C., Veiseh, O., de Mezerville, R., Sforza, M., Perry, T. A., Haupt, J., Jamiel, M., Chambers, C., Nash, A., Aghlara-Fotovat, S., et al. (2021) · Nature Biomedical Engineering · doi:10.1038/s41551-021-00739-4 · Cited by 302
Mayer, M., & Baeumner, A. J. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00719 · Cited by 300
Construction of Bio‐Piezoelectric Platforms: From Structures and Synthesis to Applications
Xu, Q., Gao, X., Zhao, S., Liu, Y., Zhang, D., Zhou, K., Khanbareh, H., Chen, W., Zhang, Y., & Bowen, C. (2021) · Advanced Materials · doi:10.1002/adma.202008452 · Cited by 298
Light Technology for Efficient and Effective Photodynamic Therapy: A Critical Review
Algorri, J. F., Ochoa, M., Roldán-Varona, P., Rodríguez-Cobo, L., & López-Higuera, J. M. (2021) · Cancers · doi:10.3390/cancers13143484 · Cited by 245
Aufa, A. N., Hassan, M. Z., & Ismail, Z. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2021.163072 · Cited by 241
“The open reduction internal fixation (ORIF) depends on fracture sites, and thus different implants were developed by to enhance the function of body parts [12,13].”
Achieving Controlled Biomolecule–Biomaterial Conjugation
Spicer, C. D., Pashuck, E. T., & Stevens, M. M. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00253 · Cited by 239
Laser Surface Texturing of Polymers for Biomedical Applications
Riveiro, A., Maçon, A. L. B., del Val, J., Comesaña, R., & Pou, J. (2018) · Frontiers in Physics · doi:10.3389/fphy.2018.00016 · Cited by 236
Sterilization of implantable polymer-based medical devices: A review
Tipnis, N. P., & Burgess, D. J. (2018) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.12.003 · Cited by 233
Combinatorial Polyacrylamide Hydrogels for Preventing Biofouling on Implantable Biosensors
Chan, D., Chien, J., Axpe, E., Blankemeier, L., Baker, S. W., Swaminathan, S., Piunova, V. A., Zubarev, D. Y., Maikawa, C. L., Grosskopf, A. K., et al. (2022) · Advanced Materials · doi:10.1002/adma.202109764 · Cited by 220
Architectural Code for Rubber Elasticity: From Supersoft to Superfirm Materials
Sheiko, S. S., & Dobrynin, A. V. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b01127 · Cited by 215
Biomedical applications of polyethylene
Paxton, N. C., Allenby, M. C., Lewis, P. M., & Woodruff, M. A. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.05.037 · Cited by 215
Biocompatibility of Polyimides: A Mini-Review
Constantin, C. P., Aflori, M., Damian, R. F., & Rusu, R. D. (2019) · Materials · doi:10.3390/ma12193166 · Cited by 202
3D Printed Polycaprolactone Carbon Nanotube Composite Scaffolds for Cardiac Tissue Engineering
Ho, C. M. B., Mishra, A., Lin, P. T. P., Ng, S. H., Yeong, W. Y., Kim, Y., & Yoon, Y. (2017) · Macromolecular Bioscience · doi:10.1002/mabi.201600250 · Cited by 192
Self-citationAdditive manufacturing of polymer melts for implantable medical devices and scaffolds
Youssef, A., Hollister, S. J., & Dalton, P. D. (2017) · Biofabrication · doi:10.1088/1758-5090/aa5766 · Cited by 190
Chemical Surface Modification of Polymeric Biomaterials for Biomedical Applications
Sun, W., Liu, W., Wu, Z., & Chen, H. (2020) · Macromolecular Rapid Communications · doi:10.1002/marc.201900430 · Cited by 182
Nitric Oxide-Releasing Polymeric Materials for Antimicrobial Applications: A Review
Rong, F., Tang, Y., Wang, T., Feng, T., Song, J., Li, P., & Huang, W. (2019) · Antioxidants · doi:10.3390/antiox8110556 · Cited by 174
Biointegrated and Wirelessly Powered Implantable Brain Devices: A Review
Das, R., Moradi, F., & Heidari, H. (2020) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2020.2966920 · Cited by 172
“To reduce mechanical discrepancy between the brain tissue and the implantable device, a hot topic of research is the use of a soft and flexible [82-84] or stretchable [85-88] system for implantable neural device.”
BackgroundUltra‐Thin Flexible Encapsulating Materials for Soft Bio‐Integrated Electronics
Sang, M., Kim, K., Shin, J., & Yu, K. J. (2022) · Advanced Science · doi:10.1002/advs.202202980 · Cited by 161
Wearable, Implantable, and Interventional Medical Devices Based on Smart Electronic Skins
Wang, L., Jiang, K., & Shen, G. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202100107 · Cited by 160
Biopolymer Coatings for Biomedical Applications
Nathanael, A. J., & Oh, T. H. (2020) · Polymers · doi:10.3390/polym12123061 · Cited by 175
“In addition, it exhibits low potential of carcinogenesis in the human body [59].”
BackgroundBone Regeneration: A Review of Current Treatment Strategies
Pace, R. D., Molinari, S., Mazzoni, E., & Perale, G. (2025) · Journal of Clinical Medicine · doi:10.3390/jcm14061838 · Cited by 197
Ultrathin Conformable Organic Artificial Synapse for Wearable Intelligent Device Applications
Jang, S., Jang, S., Lee, E.-H., Kang, M., Wang, G., & Kim, T.-W. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b12092 · Cited by 155
Applications of nanomaterial technology in biosensing
Fu, Y., Liu, T., Wang, H., Wang, Z., Hou, L., Jiang, J., & Xu, T. (2024) · Journal of Science Advanced Materials and Devices · doi:10.1016/j.jsamd.2024.100694 · Cited by 172
“High mechanical flexibility and strength, as well as sensitivity to inputs and physiological responses, may also be required [135, 136].”
Antibacterial Coatings for Improving the Performance of Biomaterials
del Olmo, J. A., Ruiz‐Rubio, L., Pérez‐Álvarez, L., Sáez‐Martínez, V., & Vilas‐Vilela, J. L. (2020) · Coatings · doi:10.3390/coatings10020139 · Cited by 147
“As examples, PMMA is used as bone cement and for intraocular lenses and PET and polytetrafluoroethylene (PTFE) are used in artificial ligaments [23].”
MethodControlling Protein Adsorption through Nanostructured Polymeric Surfaces
Firkowska‐Boden, I., Zhang, X., & Jandt, K. D. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700995 · Cited by 159
Madhu, S., Devarajan, Y., & Natrayan, L. (2023) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-023-03792-y · Cited by 141
Recent advancements in nanomaterials for biomedical implants
Gautam, S., Bhatnagar, D., Bansal, D., Batra, H., & Goyal, N. (2022) · Biomedical Engineering Advances · doi:10.1016/j.bea.2022.100029 · Cited by 152
Advanced polymer-based composites and structures for biomedical applications
Guo, Z., Poot, A. A., & Grijpma, D. W. (2021) · European Polymer Journal · doi:10.1016/j.eurpolymj.2021.110388 · Cited by 147
Li, F., Wu, Z., Chen, S., Huang, Z., Liang, C., & Lee, S. J. (2025) · International Review of Cell and Molecular Biology · doi:10.1016/bs.ircmb.2025.11.005 · Cited by 131
Polymer sutures for simultaneous wound healing and drug delivery – A review
Joseph, B., George, A., Gopi, S., Kalarikkal, N., & Thomas, S. (2017) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2017.03.041 · Cited by 133
“Application of polymeric biomaterials in medicine has been a thrust area of research owing to the exceptional and superior properties they exhibit [4].”
BackgroundChitosan-Based Biomaterial in Wound Healing: A Review
Rajinikanth, S. B., Raj, R. D. S., Keerthika, K., & Vijayaragavan, V. (2024) · Cureus · doi:10.7759/cureus.55193 · Cited by 228
“Polymeric biomaterials can be coupled with other materials as composites for their mechanical, electrical, chemical, and thermal characteristics [10,11].”
BackgroundImplants with Sensing Capabilities
Veletić, M., Apu, E. H., Simić, M., Bergsland, J., Balasingham, I., Contag, C. H., & Ashammakhi, N. A. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00005 · Cited by 139
Review on calcium‐ and magnesium‐based silicates for bone tissue engineering applications
Venkatraman, S. K., & Swamiappan, S. (2020) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36925 · Cited by 131
Synthesis and Application of Fluorine-Containing Polymers with Low Surface Energy
Peng, H. (2019) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2019.1636390 · Cited by 121
“These properties have meant that fluoropolymers have found applications(7) in areas where low adhesion is important, for example in microfluidic devices,(8) in membranes where low-fouling is required,(9) and in medical implants and medical devices.(10) Partially-fluorinated polymers likewise show surface activity; for…”
BackgroundXue, P., Li, Q., Li, Y., Sun, L., Zhang, L., Xu, Z., & Kang, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10260 · Cited by 127
Polyamides and their functionalization: recent concepts for their applications as biomaterials
Winnacker, M. (2017) · Biomaterials Science · doi:10.1039/c7bm00160f · Cited by 117
The Current Versatility of Polyurethane Three-Dimensional Printing for Biomedical Applications
Griffin, M., Castro, N. J., Bas, O., Saifzadeh, S., Butler, P. E. M., & Hutmacher, D. W. (2020) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2019.0224 · Cited by 113
Wu, S., Zhou, R., Zhou, F. Q., Streubel, P. N., Chen, S., & Duan, B. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.110268 · Cited by 110
Tailoring degradation rates of silk fibroin scaffolds for tissue engineering
Zhang, L., Liu, X., Li, G., Wang, P., & Yang, Y. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36537 · Cited by 106
Bottlebrush Bridge between Soft Gels and Firm Tissues
Keith, A. N., Vatankhah‐Varnosfaderani, M., Clair, C., Fahimipour, F., Dashtimoghadam, E., Lallam, A., Sztucki, M., Ivanov, D. A., Liang, H., Dobrynin, A. V., et al. (2020) · ACS Central Science · doi:10.1021/acscentsci.9b01216 · Cited by 112
Zeng, Q., & Huang, Z. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202301223 · Cited by 100
Additive manufacturing with polypropylene microfibers
Haigh, J. N., Dargaville, T. R., & Dalton, P. D. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.03.286 · Cited by 110
A comprehensive review on biocompatible thin films for biomedical application
Rajan, S. T., Subramanian, B., & Arockiarajan, A. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.10.243 · Cited by 102
Selvaraj, M., Balamoorthy, E., & Manivasagam, T. G. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108543 · Cited by 93
Chandra, G., & Pandey, A. (2020) · IRBM · doi:10.1016/j.irbm.2020.06.003 · Cited by 100
Yang, Z., He, Y., Liao, S., Ma, Y., Tao, X., & Wang, Y. (2021) · Science Advances · doi:10.1126/sciadv.abf9117 · Cited by 92
Biodegradable conducting polymeric materials for biomedical applications: a review
Jadoun, S., Riaz, U., & Budhiraja, V. (2020) · Medical Devices & Sensors · doi:10.1002/mds3.10141 · Cited by 102
“Since the early 20th century, a new class of materials has been widely used as new biomaterials such as synthetic polymers, composites, ceramics, alloys, metals and carbons (Kunčická et al., 2017; Teo et al., 2016).”
BackgroundMelentiev, R., Yu, N., & Lubineau, G. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102459 · Cited by 130
Qin, W., Li, Y., Ma, J., Liang, Q., & Tang, B. H. (2018) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2018.09.040 · Cited by 87
Chytrosz-Wróbel, P., Gołda‐Cępa, M., Stodolak‐Zych, E., Rysz, J., & Kotarba, A. (2023) · Applied Surface Science Advances · doi:10.1016/j.apsadv.2023.100497 · Cited by 96
Sung, C., Jeon, W., Nam, K. S., Kim, Y., Butt, H., & Park, S. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb00872a · Cited by 89
Self-citationGhosh, P., & De, P. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c01021 · Cited by 85
Pectin-based silver nanocomposite film for transdermal delivery of Donepezil
Kodoth, A. K., Ghate, V., Lewis, S. A., Prakash, B., & Badalamoole, V. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.04.191 · Cited by 88
Pharmaceutical and Biomedical Applications of Polymers
Deb, P. K., Kokaz, S. F., Abed, S. N., Paradkar, A. R., & Tekade, R. K. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-817909-3.00006-6 · Cited by 112
Adhering Low Surface Energy Materials without Surface Pretreatment via Ion–Dipole Interactions
Huang, S., Wan, Y., Ming, X., Zhou, J., Zhou, M., Chen, H., Zhang, Q., & Zhu, S. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c11822 · Cited by 83
Electrode materials for biomedical patchable and implantable energy storage devices
Chae, J. S., Park, S. K., Roh, K. C., & Park, H. S. (2019) · Energy storage materials · doi:10.1016/j.ensm.2019.04.032 · Cited by 84
Strength retention, corrosion control and biocompatibility of Mg–Zn–Si/HA nanocomposites
Parande, G., Manakari, V., Prasadh, S., Chauhan, D., Rahate, S., Wong, R. C. W., & Gupta, M. K. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.103584 · Cited by 82
González-Calderón, J. A., López, D. C., Pérez, E., & Montesinos, J. V. (2019) · Polymer Bulletin · doi:10.1007/s00289-019-02869-x · Cited by 86
Haryńska, A., Carayon, I., Kosmela, P., Szeliski, K., Łapiński, M. S., Pokrywczyńska, M., Kucińska‐Lipka, J., & Janik, H. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109958 · Cited by 81
Artificial Hip Prostheses Design and Its Evaluation by Using Ansys Under Static Loading Condition
Tripathi, G. P., Agarwal, S., Awasthi, A., & Arun, V. (2023) · Lecture notes in mechanical engineering · doi:10.1007/978-981-99-3033-3_68 · Cited by 77
Roadmap for Clinical Translation of Mobile Microrobotics
Bozuyuk, U., Wrede, P., Yıldız, E., & Sitti, M. (2024) · Advanced Materials · doi:10.1002/adma.202311462 · Cited by 92
Kaushik, N., Nhat Nguyen, L., Kim, J. H., Choi, E. H., & Kumar Kaushik, N. (2020) · International Journal of Molecular Sciences · doi:10.3390/ijms21186544 · Cited by 81
“To improve these above-mentioned issues, several studies have focused on the functionalization of polymers with other bioactive molecules, including PDA-based coating [4,65].”
BackgroundAwasthi, A., Saxena, K. K., & Dwivedi, R. K. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2020.12.176 · Cited by 107
Soft Implantable Bioelectronics
Koo, J. H., Song, J., Kim, D., & Son, D. (2021) · ACS Materials Letters · doi:10.1021/acsmaterialslett.1c00438 · Cited by 79
Mechanism of polymer composite-based nanomaterial for biomedical applications
Solangi, N. H., Karri, R. R., Mubarak, N. M., & Mazari, S. A. (2023) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2023.09.002 · Cited by 80
Li, X., Li, Y., Huang, Y., Zhang, T., Liu, Y., Yang, B., He, C., Zhou, X., & Zhang, J. (2017) · Green Chemistry · doi:10.1039/c6gc03558b · Cited by 76
Gwon, K., Kim, Y., Cho, H., Lee, S., Yang, S.-H., Kim, S., & Lee, D. N. (2021) · Nanomaterials · doi:10.3390/nano11030719 · Cited by 77
Self-citationA Ceramic‐Electrolyte Glucose Fuel Cell for Implantable Electronics
Simons, P., Schenk, S. A., Gysel, M. A., Olbrich, L. F., & Rupp, J. L. M. (2022) · Advanced Materials · doi:10.1002/adma.202109075 · Cited by 73
Mahjoubnia, A., Cai, D., Wu, Y., King, S. D., Torkian, P., Chen, A. C., Talaie, R., Chen, S., & Lin, J. (2024) · Acta Biomaterialia · doi:10.1016/j.actbio.2024.02.009 · Cited by 79
Biodegradable Materials for Tissue Engineering: Development, Classification and Current Applications
Modrák, M., Trebuňová, M., Balogová, A. F., Hudák, R., & Živčák, J. (2023) · Journal of Functional Biomaterials · doi:10.3390/jfb14030159 · Cited by 81
“On the other hand, polymeric BMs have overcome metals in some important quality attributes, such as elasticity, flexibility, longevity, and bio-inertness [27].”
BackgroundBiodegradable based TENGs for self-sustaining implantable medical devices
Baburaj, A., Banerjee, S., Aliyana, A. K., Shee, C., Banakar, M., Bairagi, S., Kumar, S. K. N., Ali, S., & Stylios, G. K. (2024) · Nano Energy · doi:10.1016/j.nanoen.2024.109785 · Cited by 75
Chen, Y., Zhang, S., Bai, J., Yang, Y., Wang, Y., Yanling, Z., Jiang, W., Wang, J., Zhu, J., Zhu, C., et al. (2024) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2024.05.028 · Cited by 78
Biomedical Applications of Electrospun Graphene Oxide
Grant, J. J., Pillai, S. C., Hehir, S., McAfee, M., & Breen, A. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.0c01663 · Cited by 70
Testing Anti-Biofilm Polymeric Surfaces: Where to Start?
Cattò, C., & Cappitelli, F. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20153794 · Cited by 75
“Polymeric materials, given their low cost, high specificity and adaptability [1], are currently used for a very broad range of applications ranging from structural materials to coatings, health care [2], packaging [3,4], communication [5], heritage [6,7], energy [8], transportation [9] and the agri-food industry [10].”
BackgroundGao, Y., Mohammadifar, M., & Choi, S. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900079 · Cited by 72
Peng, Y., Xiao, S., Yang, J., Lin, J., Yuan, W., Gu, W., Wu, X., & Cui, Z. (2017) · Applied Physics Letters · doi:10.1063/1.4990528 · Cited by 65
Production Technologies and Application of Polymer Composites in Engineering: A Review
Bukvić, M., Milojević, S., Gajević, S., Đorđević, M., & Stojаnović, B. (2025) · Polymers · doi:10.3390/polym17162187 · Cited by 82
Forever Chemicals, Per-and Polyfluoroalkyl Substances (PFAS), in Lubrication
Dias, D., Bons, J., Kumar, A., Kabir, M., & Liang, H. (2024) · Lubricants · doi:10.3390/lubricants12040114 · Cited by 64
“Moreover, its thermal stability and resistance to chemical attacks make PTFE indispensable in petrochemical and chemical processing plants [82,83].”
BackgroundSong, J., Lutz, T., Lang, N., & Lieleg, O. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202000831 · Cited by 66
Nifant'ev, I. E., Shlyakhtin, A. V., Bagrov, V. V., Minyaev, M. E., Churakov, A. V., Karchevsky, S. G., Birin, K. P., & Ivchenko, P. V. (2017) · Dalton Transactions · doi:10.1039/c7dt02469j · Cited by 62
Clinical translation of personalized bioengineered implant scaffolds
Xu, C., & Ivanovski, S. (2025) · Nature Reviews Bioengineering · doi:10.1038/s44222-024-00269-z · Cited by 78
“…(PCL), poly(lactic-co-glycolic acid), polydioxanone and polyhydroxy-alkanoates, are used in tissue reconstruction owing to a wide range of mechanical, chemical, and biological behaviours, such as favourable biocompatibility, and tunable biomechanical and biodegradation properties 56,57 (Table 1).”
Dynamic Bond Chemistry in Soft Materials: Bridging Adaptability and Mechanical Robustness
Lee, H., Kim, J., Lee, M. W., & Kang, J. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.5c00566 · Cited by 73
C, P. B. K., Maharjan, A., Acharya, M., Lee, D., Kusma, S., Gautam, R., Kwon, J., Kim, C., Kim, K., Kim, H., et al. (2023) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2023.165295 · Cited by 79
Magnesium-Titanium Alloys: A Promising Solution for Biodegradable Biomedical Implants
Шарма, С. К., Gajević, S., Sharma, L. K., Pradhan, R., Miladinović, S., Ašonja, A., & Stojаnović, B. (2024) · Materials · doi:10.3390/ma17215157 · Cited by 65
dos Santos, M. R., Alcaraz‐Espinoza, J. J., da Costa, M. M., & de Oliveira, H. P. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.03.019 · Cited by 61
Classification and Medical Applications of Biomaterials–A Mini Review
Chong, E. T. J., Ng, J. W., & Lee, P.-C. (2022) · BIO Integration · doi:10.15212/bioi-2022-0009 · Cited by 76
“Currently, many medical applications use various synthetic polymeric materials, including polypropylene, polyethylene, polymethylmethacrylate, polyethylenterephthalate, and polyurethane [41, 42].”
Background
Metadata
- Authors
- Teo, A. J. T., Mishra, A., Park, I., Kim, Y.-J., Park, W.-T., & Yoon, Y.-J.
- Affiliations
- Nanyang Technological University (SG)
- Korea Advanced Institute of Science and Technology (KR)
- Seoul National University of Science and Technology (KR)
- Corresponding author
- Park, Woo-Tae
- Yoon, Yong-Jin
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-03-04
- Volume
- 2
- Issue
- 4
- Pages
- 454-472
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W2335675049
- Cited by
- 778
- References
- 149
- Citations by year
- 2026: 46 · 2025: 90 · 2024: 107 · 2023: 85 · 2022: 84 · 2021: 93 · 2020: 81 · 2019: 75 · 2018: 65 · 2017: 44 · 2016: 8
- FWCI
- 26.15
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Biomaterials Science & Engineering (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Ministry of Education - Singapore (RG35/12, RGC4/13)
- Science and Engineering Research Council, Agency for Science, Technology and Research (SERC1121770039)
- National Research Foundation of Korea funded by the Ministry of Science, ICT & Future Planning (NRF-2013M2A2A9043274)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Synthesis and properties of polymers
- Keywords
- polymeric biomaterials, biomedical implants, biocompatible polymers, device packaging, polymer substrates, polyvinylidene fluoride, polyethylene, polypropylene, polydimethylsiloxane, parylene, polyamide, polytetrafluoroethylene, poly(methyl methacrylate), polyimide, polyurethane, liquid crystalline polymers, polymer nanocomposites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.