Polymeric Biomaterials for Medical Implants and Devices
The DOI matches its Crossref record; 147 of the 149 references it cites were found in a registry or an index.
Abstract
In this review article, we focus on the various types of materials used in biomedical implantable devices, including the polymeric materials used as substrates and for the packaging of such devices. Polymeric materials are used because of the ease of fabrication, flexibility, and their biocompatible nature as well as their wide range of mechanical, electrical, chemical, and thermal behaviors when combined with different materials as composites. Biocompatible and biostable polymers are extensively used to package implanted devices, with the main criteria that include gas permeability and water permeability of the packaging polymer to protect the electronic circuit of the device from moisture and ions inside the human body. Polymeric materials must also have considerable tensile strength and should be able to contain the device over the envisioned lifetime of the implant. For substrates, structural properties and, at times, electrical properties would be of greater concern. Section 1 gives an introduction of some medical devices and implants along with the material requirements and properties needed. Different synthetic polymeric materials such as polyvinylidene fluoride, polyethylene, polypropylene, polydimethylsiloxane, parylene, polyamide, polytetrafluoroethylene, poly(methyl methacrylate), polyimide, and polyurethane have been examined, and liquid crystalline polymers and nanocomposites have been evaluated as biomaterials that are suitable for biomedical packaging (section 2). A summary and glimpse of the future trend in this area has also been given (section 3). Materials and information used in this manuscript are adapted from papers published between 2010 and 2015 representing the most updated information available on each material.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Apart from the conductive functional materials, the insulative packaging materials are also a critical part of sensing recorders. Many popular insulating soft materials have been used for packaging sensing electrodes,[318] such as PI,[319,320] PDMS,[321,322] hydrogel,[323,324] etc., as they have suitable mechanical, dielectric and biological properties.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [318]
Citations
Cites
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Vepari, C., & Kaplan, D. L. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.013 · Cited by 2,561
The piezoelectricity of poly (vinylidene fluoride)
Kawai, H. (1969) · Japanese Journal of Applied Physics · doi:10.1143/jjap.8.975 · Cited by 2,044
Biomedical applications of polymer-composite materials: a review
Ramakrishna, S., Mayer, J., Wintermantel, E., & Leong, K. W. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00241-4 · Cited by 1,642
A review of stimuli-responsive shape memory polymer composites
Meng, H., & Li, G. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.023 · Cited by 1,190
Superconductivity in 4 Angstrom Single-Walled Carbon Nanotubes
Tang, Z. K., Zhang, L., Wang, N., Zhang, X. X., Wen, G. H., Li, G. D., Wang, J. N., Chan, C. T., & Sheng, P. (2001) · Science · doi:10.1126/science.1060470 · Cited by 816
Ambulatory esophageal pH monitoring using a wireless system
Pandolfino, J. (2003) · The American Journal of Gastroenterology · doi:10.1016/s0002-9270(03)00062-5 · Cited by 528
Hassler, C., Boretius, T., & Stieglitz, T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22169 · Cited by 501
Polyurethanes in Biomedical Applications
Burke, A., & Hasirci, N. (2004) · Advances in Experimental Medicine and Biology · doi:10.1007/978-0-306-48584-8_7 · Cited by 494
Development of Implantable Medical Devices: From an Engineering Perspective
Joung, Y.-H. (2013) · International Neurourology Journal · doi:10.5213/inj.2013.17.3.98 · Cited by 367
Research works printed but not linked: 14
- Kammula R. G., 2001, Med. Device Diagn. Ind., 23, 82
- Register O. o. t. F., 2010, Code of Federal Regulations, Title 21, Food and Drugs, Pt. 800–1299, Revised as of April 1, 2010
- Kim J., 2012, 5th European Conference of the International Federation for Medical and Biological Engineering, 1214
- Kuo A., 1999, Polymer Data Handbook
- 10.7537/j.issn.1545-1003 · doi:10.7537/j.issn.1545-1003
- Jeong J., 2012, Sens. Mater., 24, 189
- 10.1111/j.1572-0241.2003.07398.x · doi:10.1111/j.1572-0241.2003.07398.x · Paper page
- Chang J. H.-C., 2014, IEEE 27th International Conference onMicro Electro Mechanical Systems (MEMS), 1127
- Dutta S. R. B., 2013, Int. J. Rec. Sci. Res., 4, 1661
- Kirsten S., 2012, 35th International Spring Seminar on Electronics Technology (ISSE), 123
- de Beeck M. O., 2013, 2013 European Microelectronics Packaging Conference (EMPC), 1
- Imenes K., 2012, 4th Electronic System-Integration Technology Conference (ESTC), 1
- Kubyshkina G., 2011, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, 3, 11
- Sundaram V., 2011, Proceedings of the 61st IEEE Electronic Components and Technology Conference (ECTC), 1308
Cited by
Items 201–300 of 776
Kausar, A. (2020) · Journal of Plastic Film & Sheeting · doi:10.1177/8756087920917177 · Cited by 32
“Biomedical related PMMA nanocomposites also need to be studied for future development in this field such as developing delicate tissues and bone structures.(101) In PMMA-based nanocomposites, solution mixing, melt blending, in situ polymerization, and grafting methods have been successful.”
BackgroundSteinman, N. Y., Bentolila, N. Y., & Domb, A. J. (2020) · Polymers · doi:10.3390/polym12102372 · Cited by 32
“Biocompatible and biodegradable polymers are ubiquitous across modern medicine [1], finding their most common use as implants [2,3] or as drug delivery systems [4,5].”
BackgroundHuyer, L. D., Mandla, S., Wang, Y., Campbell, S., Yee, B., Euler, C., Lai, B., Bannerman, D., Lin, D. S. Y., Montgomery, M., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003341 · Cited by 36
Demonstration of a Robust All-Silicon-Carbide Intracortical Neural Interface
Bernardin, E. K., Frewin, C. L., Everly, R., Ul‐Hassan, J., & Saddow, S. E. (2018) · Micromachines · doi:10.3390/mi9080412 · Cited by 37
Das, K. K., Basu, B., Maiti, P., & Dubey, A. K. (2024) · Applied Materials Today · doi:10.1016/j.apmt.2024.102332 · Cited by 42
Zhang, M., Mi, M., Hu, Z., Li, L., Chen, Z., Gao, X., Liu, D., Xu, B., & Liu, Y. (2024) · Drug Design, Development and Therapy · doi:10.2147/dddt.s473007 · Cited by 31
“101,102 This approach leverages PDA’s excellent adhesion and biocompatibility to enhance the surface activity of polymers and improve their mechanical strength, including tensile properties.”
BackgroundMicro/Nano Technologies for High-Density Retinal Implant
Zeng, Q., Zhao, S., Yang, H., Zhang, Y., & Wu, T. (2019) · Micromachines · doi:10.3390/mi10060419 · Cited by 35
Materials and Their Biomedical Applications
Wang, M., & Duan, B. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-801238-3.99860-x · Cited by 31
Liquid Crystal Elastomer-Based Microelectrode Array for In Vitro Neuronal Recordings
Rihani, R. T., Kim, H., Black, B., Atmaramani, R., Saed, M. O., Pancrazio, J. J., & Ware, T. H. (2018) · Micromachines · doi:10.3390/mi9080416 · Cited by 32
“It is critical that the chosen polymer also form a sufficient barrier to insulate the electronics from the moist physiological environment [16].”
BackgroundNon‐hermetic packaging of biomedical microsystems from a materials perspective: A review
Chong, H., Majerus, S. J. A., Bogie, K. M., & Zorman, C. A. (2020) · Medical Devices & Sensors · doi:10.1002/mds3.10082 · Cited by 30
Bio-based Materials for Microwave Devices: A Review
Appusamy, S., Krishnan, S., Gopikrishna, M., & Raman, S. (2021) · Journal of Electronic Materials · doi:10.1007/s11664-020-08672-z · Cited by 31
Development of 3D printable bioresorbable coronary artery stents: A virtual testing approach
Okereke, M. I., Khalaj, R., Tabriz, A. G., & Douroumis, D. (2021) · Mechanics of Materials · doi:10.1016/j.mechmat.2021.104092 · Cited by 30
Biomedical electronics powered by solar cells
Wangatia, L. M., Yang, S., Zabihi, F., Zhu, M., & Ramakrishna, S. (2019) · Current Opinion in Biomedical Engineering · doi:10.1016/j.cobme.2019.08.004 · Cited by 32
Tamayo, L., Acuña, D., Riveros, A. L., Kogan, M. J., Azócar, M., Paez, M. A., Leal, M. S., Urzua, M. D., & Cerda, E. A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b02347 · Cited by 29
In vivo application of an implantable tri-anchored methylene blue-based electrochemical pH sensor
González‐Fernández, E., Staderini, M., Marland, J. R. K., Gray, M., Uçar, A., Dunare, C. C., Blair, E. O., Sullivan, P. J., Tsiamis, A., Greenhalgh, S. N., et al. (2021) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2021.113728 · Cited by 29
Preparation of particle-attached microneedles using a dry coating process
Choi, J., Cha, H., Kim, S., Kim, J. S., Kim, M.-J., Chung, H. W., Baek, S., Lee, J. M., & Park, J. (2022) · Journal of Controlled Release · doi:10.1016/j.jconrel.2022.10.003 · Cited by 30
Chi, C., Sun, B., Zhou, N., Zhang, M., Chu, X., Yuan, P., & Shen, J. (2018) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2018.01.005 · Cited by 28
del Burgo, L. S., Ciriza, J., Espona‐Noguera, A., Illa, X., Cabruja, E., Orive, G., Hernández, R. M., Villa, R., Pedraz, J. L., & Álvarez, M. (2018) · Scientific Reports · doi:10.1038/s41598-018-26869-5 · Cited by 32
Smith, J. A. M., Mele, E., Rimington, R. P., Capel, A. J., Lewis, M. P., Silberschmidt, V. V., & Li, S. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.02.012 · Cited by 31
Rezvova, M. A., Yuzhalin, A. E., Glushkova, T. V., Makarevich, M. I., Nikishau, P. A., Kostjuk, S. V., Klyshnikov, K. Y., Матвеева, В. Г., Khanova, M. Y., & Ovcharenko, E. A. (2020) · Polymers · doi:10.3390/polym12092158 · Cited by 28
“Medical devices manufactured from polymer materials are increasingly used in the clinic to replace dysfunctional tissues and organs [2,3].”
BackgroundGuerrieri, A. N., Montesi, M., Sprio, S., Laranga, R., Mercatali, L., Tampieri, A., Donati, D. M., & Lucarelli, E. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.589964 · Cited by 34
Imato, K., Nakajima, H., Yamanaka, R., & Takeda, N. (2020) · Polymer Journal · doi:10.1038/s41428-020-00432-4 · Cited by 28
Tan, R., Marzolini, N., Jiang, P., & Jang, Y. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c01054 · Cited by 32
Wu, D., Tan, J., Yao, L., Tian, J., Luo, B., Li, L., Zhou, C., & Lu, L. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106468 · Cited by 28
Rychter, P., Christova, D., Lewicka, K., & Rogacz, D. (2019) · Chemosphere · doi:10.1016/j.chemosphere.2019.03.128 · Cited by 28
Kummari, A., Pappuru, S., Gupta, P. K., Chakraborty, D., & Verma, R. S. (2019) · Materials Today Communications · doi:10.1016/j.mtcomm.2019.02.007 · Cited by 27
Exploring the versatile applications of biocomposites in the medical field
Mahmud, M. Z. A. (2023) · Bioprinting · doi:10.1016/j.bprint.2023.e00319 · Cited by 39
Hassouna, L., Illy, N., & Guégan, P. (2017) · Polymer Chemistry · doi:10.1039/c7py00675f · Cited by 26
Advances in Multiscale Characterization Techniques of Bone and Biomaterials Interfaces
Binkley, D. M., & Grandfield, K. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00420 · Cited by 26
Gaihre, B., Liu, X., Miller, A. L., Yaszemski, M. J., & Lu, L. (2020) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2020.1758718 · Cited by 27
“polymers have been extensively applied in the development of tissue engineered scaffolds with the ultimate goal of regenerating functional tissues.([3,4]) The lack of tunable”
BackgroundJavan‐Khoshkholgh, A., & Farajidavar, A. (2021) · IEEE Journal of Electromagnetics RF and Microwaves in Medicine and Biology · doi:10.1109/jerm.2021.3084516 · Cited by 31
Plasma-assisted multiscale topographic scaffolds for soft and hard tissue regeneration
Kim, W., Gwon, Y., Kim, Y.-K., Park, S., Kang, S.-J., Park, H., Kim, M., & Kim, J. (2021) · npj Regenerative Medicine · doi:10.1038/s41536-021-00162-y · Cited by 28
Self-citationDiatomite-based ceramic biocoating for magnesium implants
Kashin, A. D., Седельникова, М. Б., Chebodaeva, V. V., Викторович, У. П., Luginin, N. A., Сергеевич, Д. Э., Kazmina, O. V., Sharkeev, Y. P., Хлусов, И. А., Miller, A. A., et al. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.06.111 · Cited by 26
Soni, A., Das, P. K., Yusuf, M., & Ridha, S. (2022) · Sustainable Chemistry and Pharmacy · doi:10.1016/j.scp.2022.100748 · Cited by 26
Low-Fouling Characteristics of Ultrathin Zwitterionic Cysteine SAMs
Lin, P., Chuang, T., Chen, P., Lin, C., & Gu, F. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b01525 · Cited by 30
Nitric oxide release for improving performance of implantable chemical sensors – A review
Cha, K. H., Wang, X., & Meyerhoff, M. E. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.10.002 · Cited by 34
Biomaterials for cardiovascular diseases
Huang, Y., & Ding, Z. (2024) · Biomedical Technology · doi:10.1016/j.bmt.2024.05.001 · Cited by 29
Wang, X., Song, Z., Zhang, X., Yao, Y., Xu, M. H., Qi, H., Wei, J., & Liu, F. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.162656 · Cited by 26
Madheswaran, D., Sivan, M., Valtera, J., Košťáková, E. K., Egghe, T., Asadian, M., Novotný, V., Nguyen, N. H. A., Ševců, A., Morent, R., et al. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51851 · Cited by 25
Qian, J., Su, L., He, J., Ruan, R., Wang, J., Wang, Z., Xiao, P., Liu, C., Cao, Y., Li, W., et al. (2022) · ACS Nano · doi:10.1021/acsnano.2c06848 · Cited by 25
Recent advancements in piezoelectric energy harvesting for implantable medical devices
Upendra, B., Panigrahi, B. K., Singh, K. P., & Sabareesh, G. R. (2023) · Journal of Intelligent Material Systems and Structures · doi:10.1177/1045389x231200144 · Cited by 27
“Teo et al. (2016) reviewed various packaging materials for implantable medical devices.”
BackgroundPolymers, Blends and Nanocomposites for Implants, Scaffolds and Controlled Drug Release Applications
Dubey, K. A., Chaudhari, C. V., Bhardwaj, Y. K., & Varshney, L. (2017) · Advanced structured materials · doi:10.1007/978-981-10-3328-5_1 · Cited by 25
Biodegradable and removable implants for controlled drug delivery and release application
Chavda, V. P., Jogi, G., Paiva‐Santos, A. C., & Kaushik, A. K. (2022) · Expert Opinion on Drug Delivery · doi:10.1080/17425247.2022.2110065 · Cited by 29
Polytetrafluoroethylene microplastic properties, pollution, toxicity and analysis: a review
Alaraby, M., Abass, D., Velázquez, A., Hernández, A., & Marcos, R. (2025) · Environmental Chemistry Letters · doi:10.1007/s10311-025-01885-w · Cited by 40
“These attributes contribute to its exceptional durability and broad applicability across industrial sectors and household utensils support its use in biomedical and pharmaceutical contexts, offering higher safety and compatibility [117].”
Plasma Modified Polymeric Materials for Biosensors/Biodevice Applications
Jothi, L., & Nageswaran, G. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-813152-7.00015-9 · Cited by 33
Chen, Y., Lai, Y., Wu, P.-H., Chen, L.-S., Lin, Y., & Chen, C. (2019) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2019.11.017 · Cited by 24
Cao, Y., Chen, X., Matarasso, A. K., Wang, Z., Song, Y., Wu, G., Zhang, X., Sun, H., Wang, X. S., Bruchas, M. R., et al. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c20834 · Cited by 25
Novel four-sided neural probe fabricated by a thermal lamination process of polymer films
Shin, S., Kim, J., Jeong, J., Gwon, T. M., Lee, S., & Kim, S. J. (2016) · Journal of Neuroscience Methods · doi:10.1016/j.jneumeth.2016.12.017 · Cited by 26
Felfel, R. M., Gupta, D., Zabidi, A. Z., Prosser, A., Scotchford, C. A., Sottile, V., & Grant, D. M. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.09.035 · Cited by 24
“However several other parameters such as degradation rate, swelling profile and mechanical performance in aqueous environments should also be carefully consideredwhen selecting a biopolymer for an end application [4].”
BackgroundBig Data Transmission in Industrial IoT Systems With Small Capacitor Supplying Energy
Fang, X., Luo, J., Luo, G., Wu, W., Cai, Z., & Pan, Y. F. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2862421 · Cited by 24
“For example, in a medical care system such as heart monitoring implants [4]–[6], once implanted,”
BackgroundEspona‐Noguera, A., Ciriza, J., Cañibano-Hernández, A., Villa, R., del Burgo, L. S., Álvarez, M., & Pedraz, J. L. (2019) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2019.06.009 · Cited by 26
Fabrication and Analysis of Polydimethylsiloxane (PDMS) Microchannels for Biomedical Application
Tayyaba, S., Ashraf, M. W., Ahmad, Z., Wang, N., Afzal, M. J., & Afzulpurkar, N. (2020) · Processes · doi:10.3390/pr9010057 · Cited by 22
“In this study, blood (plasma) density is considered 1025 kg/m3 and blood (cells) density is taken as 1125 kgm−3 [44,57].”
BackgroundMethodWettability Study on Natural Rubber Surfaces for Applications as Biomembranes
do Nascimento, R. M., Ramos, S. M. M., Bechtold, I. H., & Hernandes, A. C. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00723 · Cited by 23
Yang, Y., Jia, Y., Zhao, Y., Wang, H., & Zhang, H. (2024) · Friction · doi:10.1007/s40544-023-0850-7 · Cited by 26
Cornejo‐Bravo, J. M., Palomino, K., Palomino-Vizcaíno, G., Perez-Landeros, O. M., Curiel, M., Valdez, B. S., Bucio, E., & Magaña, H. (2021) · Materials · doi:10.3390/ma14051065 · Cited by 23
“These polymeric materials have been widely used in medical device production due to their thermal and mechanical stability, biocompatibility, cheap production, and compatibility with many sterilization methods [14,15].”
BackgroundGarcia-Brand, A. J., Morales, M. A., Hozman-Manrique, A. S., Ramirez, A. C., Cruz, L. J., Marañón, A., Muñoz-Camargo, C., Cruz, J. C., & Porras, A. (2021) · Polymers · doi:10.3390/polym13213707 · Cited by 27
Agarwal, A., Kumar, A., Garg, P., Chakraborty, A., Verma, R., Sarwat, M., Gupta, A., Sasmal, P. K., Verma, Y. K., Chowdhury, C., et al. (2022) · ACS Applied Polymer Materials · doi:10.1021/acsapm.2c00722 · Cited by 23
Oxidative functionalization of polypropylene mesh surface by radio frequency plasma
Sethi, V., Verma, C., Mukhopadhyay, S., Gupta, A., & Gupta, B. (2023) · Surfaces and Interfaces · doi:10.1016/j.surfin.2023.102656 · Cited by 25
Young, R. J., Neville, S. L., Coghlan, C. J., McDevitt, C. A., & Sumby, C. J. (2018) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.201800640 · Cited by 24
Graphene Polymer Composites: Review on Fabrication Method, Properties and Future Perspectives
Daniel, N., & Hong, L. (2021) · Advances in Science and Technology – Research Journal · doi:10.12913/22998624/129680 · Cited by 22
“The use of graphene with excellent properties, such as excellent thermal, mechanical, and electrical behavior, combined with different polymers, is rapidly increasing in medical implants [1, 3, 78, 79].”
BackgroundApplications of Diels–Alder Chemistry in Biomaterials and Drug Delivery
Yeingst, T. J., Helton, A. M., & Hayes, D. J. (2024) · Macromolecular Bioscience · doi:10.1002/mabi.202400274 · Cited by 28
Hassanein, N., Bougherara, H., & Amleh, A. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.103409 · Cited by 21
Federico, S., Pitarresi, G. L., Palumbo, F. S., Fiorica, C., Yang, F., & Giammona, G. (2020) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2020.111438 · Cited by 21
Material Challenges and Opportunities in 3D Printing for Hip Implant Applications
Okolie, O., Stachurek, I., Kandasubramanian, B., & Njuguna, J. (2022) · Recent Progress in Materials · doi:10.21926/rpm.2201004 · Cited by 26
Novel carbon dioxide based poly(hydroxyurethane-urea)s: Synthesis and properties
Jiang, S., & Liu, L. (2022) · Polymer · doi:10.1016/j.polymer.2022.124652 · Cited by 20
Gizer, S. G., Bhethanabotla, V. R., Ayyala, R. S., & Şahiner, N. (2023) · Surfaces and Interfaces · doi:10.1016/j.surfin.2023.102646 · Cited by 20
Ahmed, N., Hurairah, M. A., Ali, M. A., Raza, M. H., Rehman, A. U., & Rafaqat, M. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.10.048 · Cited by 21
Progress in Nanostructured Mechano-Bactericidal Polymeric Surfaces for Biomedical Applications
Kumara, S. P. S. N. B. S., Senevirathne, S. W. M. A. I., Mathew, A., Bray, L. J., Mirkhalaf, M., & Yarlagadda, P. K. D. V. (2023) · Nanomaterials · doi:10.3390/nano13202799 · Cited by 22
“Biocompatible polymers are attractive alternatives that can be used in such applications due to ease of processing, low weight, high biocompatibility, and biodegradability [16–19].”
BackgroundChudinov, V. S., Kondyurina, I. V., Terpugov, V. N., & Kondyurin, A. V. (2018) · Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms · doi:10.1016/j.nimb.2018.12.026 · Cited by 22
Tan, F., & Al‐Rubeai, M. (2019) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2019.00247 · Cited by 21
“, 2018), whereas polymers feature extraordinary flexibility and long-term stability (Teo et al., 2016).”
BackgroundDevelopment of an active high-density transverse intrafascicular micro-electrode probe
Verplancke, R., Cauwe, M., Schaubroeck, D., Cuypers, D., Vandecasteele, B., Mader, L., Vanhaverbeke, C., Ballini, M., O’Callaghan, J., Goikoetxea, E., et al. (2020) · Journal of Micromechanics and Microengineering · doi:10.1088/1361-6439/ab5df2 · Cited by 21
“However, it has been reported that polymers as encapsulation material for implantable electronic devices suffer from moisture diffusion, swelling, poor adhesion and/or material degradation, eventually leading to device failure [15, 16].”
BackgroundHaruki, M., Tada, J., Funaki, R., Onishi, H., & Tada, Y. (2019) · Thermochimica Acta · doi:10.1016/j.tca.2019.178491 · Cited by 21
Biocompatible materials of pulsatile and rotary blood pumps: A brief review
Ahmed, A., Wang, X., & Yang, M. Z. (2020) · REVIEWS ON ADVANCED MATERIALS SCIENCE · doi:10.1515/rams-2020-0009 · Cited by 21
“There are specific requirements that an implant or device must meet for long-term use in the human body short of which the user is bound to experience dire side effects or even death [9].”
BackgroundMrówka, M., Szymiczek, M., Machoczek, T., & Pawlyta, M. (2021) · Materials · doi:10.3390/ma14133625 · Cited by 21
Polymer-Drug Anti-Thrombogenic and Hemocompatible Coatings as Surface Modifications
Zawidlak-Węgrzyńska, B., Rydz, J., Musioł, M., & Radziwon‐Balicka, A. (2024) · Pharmaceutics · doi:10.3390/pharmaceutics16030432 · Cited by 22
“This results in improved efficiency and reduced risk of device failure [92].”
BackgroundLi, W., Wu, H., Huang, Y., Yao, Y., Hou, Y., Teng, Q., Cai, M., & Wu, J. (2024) · Angewandte Chemie · doi:10.1002/ange.202408250 · Cited by 20
Li, C.-Y., You, J., Liu, I., Istiqomah, A., & Liao, Y. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.162332 · Cited by 21
Ziąbka, M., Dziadek, M., & Pielichowska, K. (2020) · Polymers · doi:10.3390/polym12010197 · Cited by 20
“First, the implanted polymer devices should maintain their operational capabilities within the biological environment of the body [9].”
BackgroundLiu, Y., Zou, Y., Wang, J., Wang, S., & Liu, X. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.50290 · Cited by 20
Bloise, N., Waldorff, E. I., Montagna, G., Bruni, G., Fassina, L., Fang, S., Zhang, N., Jiang, J., Ryaby, J. T., & Visai, L. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms23137070 · Cited by 20
Koutsamanis, I., Roblegg, E., & Spoerk, M. (2023) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2023.104289 · Cited by 21
Low, D. Y. S., Supramaniam, J., Leong, W. D., Soottitantawat, A., Charinpanitkul, T., Tanthapanichakoon, W., Manickam, S., Tan, K. W., Goh, B. H., & Tang, S. Y. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100545 · Cited by 24
Single‐Administration Self‐Boosting Microneedle Patch for the Treatment of Obesity
Singh, P., Vinikoor, T., Sharma, N., Nelson, N. E., Prasadh, S., Oiknine, R., & Nguyen, T. D. (2024) · Advanced Therapeutics · doi:10.1002/adtp.202400028 · Cited by 24
Kondyurina, I. V., Wise, S. G., Ngo, A. K. Y., Filipe, E. C., Kondyurin, A. V., Weiss, A. S., Bao, S., & Bilek, M. (2017) · Biomedical Materials · doi:10.1088/1748-605x/aa6eb6 · Cited by 20
Przybytek, A., Gubanska, I., Kucińska‐Lipka, J., & Janik, H. (2018) · Fibres and Textiles in Eastern Europe · doi:10.5604/01.3001.0012.5168 · Cited by 21
Nanostructured Polymer Biocomposites: Pharmaceutical Applications
Sagadevan, S., Fareen, A., Hoque, M. E., Chowdhury, Z. Z., Johan, M. R., Rafique, R. F., Aziz, F. H. A., & Lett, J. A. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816771-7.00012-0 · Cited by 20
Han, L., Yin, Q., Yang, L., van Rijn, P., Yang, Y., Liu, Y., Li, M., Yan, M., Zhou, Q., Yu, T., et al. (2020) · Biochemical and Biophysical Research Communications · doi:10.1016/j.bbrc.2020.03.038 · Cited by 20
Application of Nondegradable Synthetic Materials for Tendon and Ligament Injury
Yu, C., Feng, S., Li, Y., & Chen, J. (2023) · Macromolecular Bioscience · doi:10.1002/mabi.202300259 · Cited by 21
Zhu, H., Han, L., Xu, J., Lai, X., Li, H., Zeng, X., Wu, X., & Liu, H. (2024) · Applied Materials Today · doi:10.1016/j.apmt.2024.102411 · Cited by 19
Klemm, S., Baum, M. J., Qiu, H., Nan, Z., Cavalheiro, M., Teixeira, M. C., Tendero, C., Gapeeva, A., Adelung, R., Dague, É., et al. (2021) · Nanomaterials · doi:10.3390/nano11020271 · Cited by 20
Thin-Film PZT-Based Multi-Channel Acoustic MEMS Transducer for Cochlear Implant Applications
Yüksel, M. B., Koyuncuoğlu, A., & Külah, H. (2021) · IEEE Sensors Journal · doi:10.1109/jsen.2021.3130953 · Cited by 19
Mao, H., Chen, C., Yan, H., & Rwei, S. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.52841 · Cited by 19
Lungu, C. N., Crețeanu, A., & MEHEDINTI, M. C. (2024) · Life · doi:10.3390/life14040451 · Cited by 25
“[220] Remote-controlled drug delivery systems Developing remote-controlled drug delivery systems that can be activated externally (e.g., using magnetic fields, ultrasound, or light) to trigger drug release at the desired location.”
BackgroundFlores‐Rojas, G. G., Pino-Ramos, V. H., López‐Saucedo, F., Concheiro, Á., Alvarez‐Lorenzo, C., & Bucio, E. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.07.040 · Cited by 19
Tung, W. T., Zou, J., Sun, X., Wang, W., Gould, O. E. C., Kratz, K. L., Ma, N., & Lendlein, A. (2019) · Clinical Hemorheology and Microcirculation · doi:10.3233/ch-199235 · Cited by 19
“Tailoring the structure and architecture of a specific material is important in ensuring its successful function in a particular application, for example as a hydrogel scaffold, drug delivery vector [1–3], patch in wound healing [4, 5] or biomedical implant for tissue replacement [6–8].”
Sarikaya, R., Song, L., Yuca, E., Xie, S., Boone, K., Misra, A. K., Spencer, P., & Tamerler, C. (2020) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2020.104135 · Cited by 20
Седельникова, М. Б., Ugodchikova, A. V., Tolkacheva, T. V., Chebodaeva, V. V., Cluklhov, I. A., Khimich, M. A., Bakina, O. V., Лернер, М. И., Egorkin, V. S., Schmidt, J., et al. (2021) · Metals · doi:10.3390/met11050754 · Cited by 19
“It has been noted that polymers demonstrate unsuitable mechanical properties; furthermore, the biocompatibility of polymers regarding the surrounding tissues turned out to be very ambiguous [5].”
BackgroundYuan, H., Lin, C., & Wang, C. (2024) · Friction · doi:10.26599/frict.2025.9441003 · Cited by 22
Zaccardi, F., Toto, E., Rastogi, S., Saponara, V. L., Santonicola, M. G., & Laurenzi, S. (2023) · Nanomaterials · doi:10.3390/nano13071288 · Cited by 18
“Its high biocompatibility, good mechanical properties, and chemical resistance have made PE the material of choice for the commercial production of orthopedic prostheses and packaging [1,2].”
BackgroundArsenie, L. V., & Lapinte, V. (2023) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2023.107993 · Cited by 25
Metadata
- Authors
- Teo, A. J. T., Mishra, A., Park, I., Kim, Y.-J., Park, W.-T., & Yoon, Y.-J.
- Affiliations
- Nanyang Technological University (SG)
- Korea Advanced Institute of Science and Technology (KR)
- Seoul National University of Science and Technology (KR)
- Corresponding author
- Park, Woo-Tae
- Yoon, Yong-Jin
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-03-04
- Volume
- 2
- Issue
- 4
- Pages
- 454-472
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W2335675049
- Cited by
- 778
- References
- 149
- Citations by year
- 2026: 46 · 2025: 90 · 2024: 107 · 2023: 85 · 2022: 84 · 2021: 93 · 2020: 81 · 2019: 75 · 2018: 65 · 2017: 44 · 2016: 8
- FWCI
- 26.15
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Biomaterials Science & Engineering (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Ministry of Education - Singapore (RG35/12, RGC4/13)
- Science and Engineering Research Council, Agency for Science, Technology and Research (SERC1121770039)
- National Research Foundation of Korea funded by the Ministry of Science, ICT & Future Planning (NRF-2013M2A2A9043274)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Synthesis and properties of polymers
- Keywords
- polymeric biomaterials, biomedical implants, biocompatible polymers, device packaging, polymer substrates, polyvinylidene fluoride, polyethylene, polypropylene, polydimethylsiloxane, parylene, polyamide, polytetrafluoroethylene, poly(methyl methacrylate), polyimide, polyurethane, liquid crystalline polymers, polymer nanocomposites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.