The DOI matches its Crossref record; 147 of the 149 references it cites were found in a registry or an index.
Polymeric Biomaterials for Medical Implants and Devices
Abstract
In this review article, we focus on the various types of materials used in biomedical implantable devices, including the polymeric materials used as substrates and for the packaging of such devices. Polymeric materials are used because of the ease of fabrication, flexibility, and their biocompatible nature as well as their wide range of mechanical, electrical, chemical, and thermal behaviors when combined with different materials as composites. Biocompatible and biostable polymers are extensively used to package implanted devices, with the main criteria that include gas permeability and water permeability of the packaging polymer to protect the electronic circuit of the device from moisture and ions inside the human body. Polymeric materials must also have considerable tensile strength and should be able to contain the device over the envisioned lifetime of the implant. For substrates, structural properties and, at times, electrical properties would be of greater concern. Section 1 gives an introduction of some medical devices and implants along with the material requirements and properties needed. Different synthetic polymeric materials such as polyvinylidene fluoride, polyethylene, polypropylene, polydimethylsiloxane, parylene, polyamide, polytetrafluoroethylene, poly(methyl methacrylate), polyimide, and polyurethane have been examined, and liquid crystalline polymers and nanocomposites have been evaluated as biomaterials that are suitable for biomedical packaging (section 2). A summary and glimpse of the future trend in this area has also been given (section 3). Materials and information used in this manuscript are adapted from papers published between 2010 and 2015 representing the most updated information available on each material.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Apart from the conductive functional materials, the insulative packaging materials are also a critical part of sensing recorders. Many popular insulating soft materials have been used for packaging sensing electrodes,[318] such as PI,[319,320] PDMS,[321,322] hydrogel,[323,324] etc., as they have suitable mechanical, dielectric and biological properties.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [318]
Citations
Cites
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Vepari, C., & Kaplan, D. L. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.013 · Cited by 2,561
The piezoelectricity of poly (vinylidene fluoride)
Kawai, H. (1969) · Japanese Journal of Applied Physics · doi:10.1143/jjap.8.975 · Cited by 2,044
Biomedical applications of polymer-composite materials: a review
Ramakrishna, S., Mayer, J., Wintermantel, E., & Leong, K. W. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00241-4 · Cited by 1,642
A review of stimuli-responsive shape memory polymer composites
Meng, H., & Li, G. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.023 · Cited by 1,190
Superconductivity in 4 Angstrom Single-Walled Carbon Nanotubes
Tang, Z. K., Zhang, L., Wang, N., Zhang, X. X., Wen, G. H., Li, G. D., Wang, J. N., Chan, C. T., & Sheng, P. (2001) · Science · doi:10.1126/science.1060470 · Cited by 816
Ambulatory esophageal pH monitoring using a wireless system
Pandolfino, J. (2003) · The American Journal of Gastroenterology · doi:10.1016/s0002-9270(03)00062-5 · Cited by 528
Hassler, C., Boretius, T., & Stieglitz, T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22169 · Cited by 501
Polyurethanes in Biomedical Applications
Burke, A., & Hasirci, N. (2004) · Advances in Experimental Medicine and Biology · doi:10.1007/978-0-306-48584-8_7 · Cited by 494
Development of Implantable Medical Devices: From an Engineering Perspective
Joung, Y.-H. (2013) · International Neurourology Journal · doi:10.5213/inj.2013.17.3.98 · Cited by 367
Implantable devices: issues and challenges
Bazaka, K., & Jacob, M. (2012) · Electronics · doi:10.3390/electronics2010001 · Cited by 358
(2009) · doi:10.1016/b978-0-12-374721-1.x0001-6 · Cited by 330
Functionalized Silk Biomaterials for Wound Healing
Gil, E. S., Panilaitis, B., Bellas, E., & Kaplan, D. L. (2013) · Advanced Healthcare Materials · doi:10.1002/adhm.201200192 · Cited by 322
Nanostructured scaffolds for bone tissue engineering
Li, X., Wang, L., Fan, Y., Feng, Q., Cui, F., & Watari, F. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34539 · Cited by 319
Patterning piezoelectric thin film PVDF–TrFE based pressure sensor for catheter application
Sharma, T., Je, S.-S., Gill, B., & Zhang, J. X. J. (2012) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2011.08.019 · Cited by 316
Materials for Advanced Packaging
(2009) · Springer eBooks · doi:10.1007/978-0-387-78219-5 · Cited by 294
PVDF as a new polymer for the construction of surgical meshes
Klinge, U., Klosterhalfen, B., Öttinger, A. P., Junge, K., & Schumpelick, V. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00070-4 · Cited by 282
Piezoelectric PU/PVDF electrospun scaffolds for wound healing applications
Guo, H.-F., Li, Z.-S., Dong, S.-W., Chen, W.-J., Deng, L., Wang, Y.-F., & Ying, D.-J. (2012) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/j.colsurfb.2012.03.014 · Cited by 272
Characterization of parylene C as an encapsulation material for implanted neural prostheses
Hassler, C., von Metzen, R. P., Ruther, P., & Stieglitz, T. (2010) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.31584 · Cited by 264
Synthetic spider silk: a modular fiber
Hinman, M. B., Jones, J. A., & Lewis, R. V. (2000) · Trends in Biotechnology · doi:10.1016/s0167-7799(00)01481-5 · Cited by 248
Handbook of Polymer Applications in Medicine and Medical Devices
(2014) · Elsevier eBooks · doi:10.1016/c2012-0-07906-9 · Cited by 243
In vitro evaluation of the long-term stability of polyimide as a material for neural implants
Rubehn, B., & Stieglitz, T. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.01.053 · Cited by 242
Poly(3-hydroxyalkanoate)s: Diversification and biomedical applications
Hazer, D. B., Kılıçay, E., & Hazer, B. (2012) · Materials Science and Engineering: C · doi:10.1016/j.msec.2012.01.021 · Cited by 240
Plastics in Medical Devices: Properties, Requirements and Applications
Sastri, V. R. (2010) · Cited by 222
Development of nanomaterials for bone repair and regeneration
McMahon, R. E., Wang, L., Skoracki, R., & Mathur, A. B. (2013) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.32823 · Cited by 219
Microstrip RF surface coil design for extremely high‐field MRI and spectroscopy
Zhang, X., Ugurbil, K., & Chen, W. (2001) · Magnetic Resonance in Medicine · doi:10.1002/mrm.1212 · Cited by 199
Niinomi, M. (2010) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845699246 · Cited by 196
Review on rubbers in medicine: natural, silicone and polyurethane rubbers
Rahimi, A., & Mashak, A. (2013) · Plastics, Rubber and Composites · doi:10.1179/1743289811y.0000000063 · Cited by 186
Fused deposition modeling of patient‐specific polymethylmethacrylate implants
Espalin, D., Arcaute, K., Rodriguez, D., Medina, F., Posner, M., & Wicker, R. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011034825 · Cited by 176
Scheidbach, H., Tamme, C., Tannapfel, A., Lippert, H., & K�ckerling, F. (2004) · Surgical Endoscopy · doi:10.1007/s00464-003-8113-1 · Cited by 174
Advances in microbicide vaginal rings
Malcolm, R. K., Edwards, K.-L., Kiser, P., Romano, J., & Smith, T. J. (2010) · Antiviral Research · doi:10.1016/j.antiviral.2010.09.003 · Cited by 172
Kwon, K. Y., Sirowatka, B., Weber, A., & Li, W. (2013) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2013.2282318 · Cited by 166
Kim, B.-J., Hong, K.-S., Park, K.-J., Park, D.-H., Chung, Y.-G., & Kang, S.-H. (2012) · Journal of Korean Neurosurgical Society · doi:10.3340/jkns.2012.52.6.541 · Cited by 166
Polymer integration for packaging of implantable sensors
Qin, Y., Howlader, M. M. R., Deen, M. J., Haddara, Y. M., & Selvaganapathy, P. R. (2014) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2014.05.063 · Cited by 163
Handbook of Nanoscience, Engineering, and Technology
(2007) · CRC Press eBooks · doi:10.1201/9781420007848 · Cited by 163
Direct‐Write Assembly of 3D Silk/Hydroxyapatite Scaffolds for Bone Co‐Cultures
Sun, L., Parker, S. T., Syoji, D., Wang, X., Lewis, J. A., & Kaplan, D. L. (2012) · Advanced Healthcare Materials · doi:10.1002/adhm.201200057 · Cited by 159
A passive MEMS drug delivery pump for treatment of ocular diseases
Lo, R., Li, P.-Y., Saati, S., Agrawal, R. N., Humayun, M. S., & Meng, E. (2009) · Biomedical Microdevices · doi:10.1007/s10544-009-9313-9 · Cited by 158
Bone substitutes in vertebroplasty
Heini, P., & Berlemann, U. (2001) · European Spine Journal · doi:10.1007/s005860100308 · Cited by 153
Medical rapid prototyping applications and methods
Hieu, L. C., Zlatov, N., Sloten, J. V., Bohez, E. L. J., Khanh, L., Binh, P. H., Oris, P., & Toshev, Y. (2005) · Assembly Automation · doi:10.1108/01445150510626415 · Cited by 152
High density interconnects and flexible hybrid assemblies for active biomedical implants
Meyer, J.-U., Stieglitz, T., Scholz, O., Haberer, W., & Beutel, H. (2001) · IEEE Transactions on Advanced Packaging · doi:10.1109/6040.938305 · Cited by 145
Hwang, G., Im, D., Lee, S., Lee, J., Koo, M. Y., Park, S. Y., Kim, S., Yang, K., Kim, S. J., Lee, K., et al. (2013) · ACS Nano · doi:10.1021/nn401246y · Cited by 139
Das, B., Mandal, M., Upadhyay, A., Chattopadhyay, P., & Karak, N. (2013) · Biomedical Materials · doi:10.1088/1748-6041/8/3/035003 · Cited by 122
Sterilisation of biomaterials and medical devices
Lerouge, S., & Simmons, A. (2012) · Woodhead Publishing Limited eBooks · doi:10.1533/9780857096265 · Cited by 121
Biomedical investigation of CNT based coatings
Li, X., Liu, X., Huang, J., Fan, Y., & Cui, F. (2011) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2011.02.063 · Cited by 116
Monolithic Encapsulation of Implantable Neuroprosthetic Devices Using Liquid Crystal Polymers
Lee, S. W., Min, K. S., Jeong, J., Kim, J., & Kim, S. J. (2011) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2011.2136341 · Cited by 116
Poly(lactic acid)/carbon nanotube nanocomposites with integrated degradation sensing
Mai, F., Habibi, Y., Raquez, J., Dúbois, P., Feller, J., Peijs, T., & Bilotti, E. (2013) · Polymer · doi:10.1016/j.polymer.2013.10.035 · Cited by 99
Surface modification of polymers for biocompatibility via exposure to extreme ultraviolet radiation
Ahad, I. U., Bartnik, A. S., Fiedorowicz, H., Kostecki, J., Korczyc, B., Ciach, T., & Brabazon, D. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34958 · Cited by 99
Buckling and kinking force measurements on individual multiwalled carbon nanotubes
Jensen, K., Mickelson, W., Kis, A., & Zettl, A. K. (2007) · Physical Review B · doi:10.1103/physrevb.76.195436 · Cited by 93
PEDOT/MWCNT composite film coated microelectrode arrays for neural interface improvement
Chen, S., Pei, W., Gui, Q., Tang, R., Chen, Y., Zhao, S., Wang, H., & Chen, H. (2013) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2013.01.033 · Cited by 92
Magnetic Resonance Imaging and Implantable Devices
Nazarian, S., Beinart, R., & Halperin, H. R. (2013) · Circulation Arrhythmia and Electrophysiology · doi:10.1161/circep.113.000116 · Cited by 90
Classification of Biomaterials used in Medicine
Parida, P., Behera, A., & Mishra, S. C. (2012) · International Journal of Advances in Applied Sciences · doi:10.11591/ijaas.v1i3.882 · Cited by 82
Surface modification of polypropylene membrane by polyethylene glycol graft polymerization
Abednejad, A. S., Amoabediny, G., & Ghaee, A. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.05.060 · Cited by 75
Unconventional Low-Cost Fabrication and Patterning Techniques for Point of Care Diagnostics
Sharma, H., Nguyen, D., Chen, A., Lew, V., & Khine, M. (2010) · Annals of Biomedical Engineering · doi:10.1007/s10439-010-0213-1 · Cited by 74
Riveiro, A., Soto, R., del Val, J., Comesaña, R., Boutinguiza, M., Quintero, F., Lusquiños, F., & Pou, J. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2014.02.130 · Cited by 72
Characterizing the ex vivo mechanical properties of synthetic polypropylene surgical mesh
Li, X., Kruger, J. A., Jor, J. W. Y., Wong, V., Dietz, H. P., Nash, M. P., & Nielsen, P. M. F. (2014) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2014.05.005 · Cited by 68
The encapsulation of polyurethane-insulated transvenous cardiac pacemaker leads
Stokes, K., Anderson, J. M., McVenes, R., & McClay, C. B. (1995) · Cardiovascular Pathology · doi:10.1016/1054-8807(95)00023-x · Cited by 68
Microbial biofilms associated with biliary stent clogging
Guaglianone, E., Cardines, R., Vuotto, C., Rosa, R. D., Babini, V., Mastrantonio, P., & Donelli, G. (2010) · FEMS Immunology & Medical Microbiology · doi:10.1111/j.1574-695x.2010.00686.x · Cited by 66
Amanatullah, D. F., Landa, J., Strauss, E. J., Garino, J. P., Kim, S. H., & Cesare, P. E. D. (2011) · The Journal of Arthroplasty · doi:10.1016/j.arth.2011.04.032 · Cited by 65
Gradaus, R., BREITHARDT, G. E., & Böcker, D. (2003) · Pacing and Clinical Electrophysiology · doi:10.1046/j.1460-9592.2003.00112.x · Cited by 65
5th European Conference of the International Federation for Medical and Biological Engineering
Morettini, M., Guercio, G., & Burattini, R. (2011) · World Congress on Medical Physics and Biomedical Engineering, September 7 - 12, 2009, Munich, Germany · doi:10.1007/978-3-642-23508-5 · Cited by 65
Superconducting characteristics of 4-Å carbon nanotube–zeolite composite
Lortz, R., Zhang, Q., Shi, W., Ye, J. T., Qiu, C., Wang, Z., He, H., Sheng, P., Qian, T., Tang, Z., et al. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0813162106 · Cited by 63
Mechanical Requirements of Shape-Memory Polymers in Biomedical Devices
Safranski, D. L., Smith, K. E., & Gall, K. (2013) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583724.2012.752385 · Cited by 61
New technique for mesh repair of paracolostomy hernias
Hofstetter, W. L., Vukasin, P., Ortega, A. E., Anthone, G. J., & Beart, R. W. (1998) · Diseases of the Colon & Rectum · doi:10.1007/bf02237400 · Cited by 61
Pergal, M. V., Brkljačić, J. M., Tovilović-Kovačević, G., Ostojić, S., Gođevac, D. M., Vasiljević-Radović, D. G., & Djonlagić, J. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35071 · Cited by 58
The use of DBD plasma treatment and polymerization for the enhancement of biomedical UHMWPE
Cools, P., Vrekhem, S. V., Geyter, N. D., & Morent, R. (2014) · Thin Solid Films · doi:10.1016/j.tsf.2014.08.033 · Cited by 56
Polymeric biomaterials for load-bearing medical devices
Pruitt, L. A., & Furmanski, J. (2009) · JOM · doi:10.1007/s11837-009-0126-3 · Cited by 56
Liquid Crystal Polymer (LCP), an Attractive Substrate for Retinal Implant
(2012) · Sensors and Materials · doi:10.18494/sam.2012.823 · Cited by 54
Medialization thyroplasty: vocal outcome of silicone and titanium implant
Ardenne, N. V., Vanderwegen, J., Nuffelen, G. V., Bodt, M. S. D., & de Heyning, P. V. (2010) · European Archives of Oto-Rhino-Laryngology · doi:10.1007/s00405-010-1327-7 · Cited by 52
Terrada, C., Julián, K., Cassoux, N., Prieur, A., Debré, M., Quartier, P., LeHoang, P., & Bodaghi, B. (2011) · Journal of Cataract & Refractive Surgery · doi:10.1016/j.jcrs.2011.05.037 · Cited by 50
In Vivo Chromatic Aberration in Eyes Implanted With Intraocular Lenses
Pérez‐Merino, P., Dorronsoro, C., Llorente, L., Durán, S., Jiménez-Alfaro, I., & Marcos, S. C. (2013) · Investigative Ophthalmology & Visual Science · doi:10.1167/iovs.13-11912 · Cited by 48
Zhang, F., Zhang, Z., Zhou, T., Liu, Y., & Leng, J. (2015) · Frontiers in Materials · doi:10.3389/fmats.2015.00062 · Cited by 47
Gonçalves, G., Portolés, M. T., Ramírez‐Santillán, C., Vallet‐Regí, M., Serro, A. P., Gracio, J. J. D. A., & Marques, P. A. A. P. (2013) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-013-5030-2 · Cited by 46
Rivkin, A. Z. (2014) · Dermatologic Surgery · doi:10.1111/dsu.12415 · Cited by 46
Algarrahi, K., Franck, D., Ghezzi, C. E., Cristofaro, V., Yang, X., Sullivan, M. P., Chung, Y. G., Affas, S., Jennings, R. W., Kaplan, D. L., et al. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.02.092 · Cited by 44
Dumas, J. E., Davis, T., Holt, G. E., Yoshii, T., Perrien, D. S., Nyman, J. S., Boyce, T. M., & Guelcher, S. A. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.01.030 · Cited by 43
Packaging Materials and Techniques for Implantable Instruments
Ko, W. H., & Spear, T. M. (1983) · IEEE Engineering in Medicine and Biology Magazine · doi:10.1109/emb-m.1983.5005879 · Cited by 42
Jeong, J., Lee, S.-W., Min, K. S., & Kim, S. J. (2013) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2013.04.001 · Cited by 42
Thota, A. K., Kuntaegowdanahalli, S., Starosciak, A. K., Abbas, J. J., Orbay, J., Horch, K. W., & Jung, R. (2015) · Journal of Neuroscience Methods · doi:10.1016/j.jneumeth.2014.07.020 · Cited by 41
Chemical and Physical Properties of Polyimides: Biomedical and Engineering Applications
Georgiev, A., Dimov, D., Spassova, E., Assa, J., Dineff, P. D., & Danev, G. (2012) · InTech eBooks · doi:10.5772/53918 · Cited by 40
Polypropylene mesh: evidence for lack of carcinogenicity
Moalli, P., Brown, B. N., Reitman, M., & Nager, C. W. (2014) · International Urogynecology Journal · doi:10.1007/s00192-014-2343-8 · Cited by 39
Electrospun nanofiber membranes for electrically activated shape memory nanocomposites
Zhang, F., Zhang, Z., Liu, Y., & Leng, J. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/6/065020 · Cited by 39
Na, H. K., Song, H.-Y., Kim, J. H., Park, J., Kang, M. K., Lee, J. J., & Oh, S. J. (2012) · European Radiology · doi:10.1007/s00330-012-2661-5 · Cited by 39
Packaging of Implantable Microsystems
Najafi, K. (2007) · Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ... · doi:10.1109/icsens.2007.4388335 · Cited by 39
Ultra-thin layer packaging for implantable electronic devices
Hogg, A., Aellen, T., Uhl, S., Graf, B., Keppner, H., Tardy, Y., & Burger, J. (2013) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/23/7/075001 · Cited by 38
Luo, C., Cao, G., & Shen, I. Y. (2013) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2013.06.027 · Cited by 38
Sowa-Söhle, E. N., Schwenke, A., Wagener, P., Weiß, A., Wiegel, H., Sajti, C. L., Haverich, A., Barcikowski, S., & Loos, A. (2013) · BioNanoMaterials · doi:10.1515/bnm-2013-0012 · Cited by 37
Engineering a degradable polyurethane intravaginal ring for sustained delivery of dapivirine
Kaur, M., Gupta, K. M., Poursaid, A. E., Karra, P., Mahalingam, A., Aliyar, H. A., & Kiser, P. F. (2011) · Drug Delivery and Translational Research · doi:10.1007/s13346-011-0027-1 · Cited by 37
Classification of Biomaterials used in Medicine
Parida, P., Behera, A., & Mishra, S. C. (2012) · International Journal of Advances in Applied Sciences · doi:10.11591/ijaas.v1.i3.pp125-129 · Cited by 37
de la Peña-Salcedo, J. A., Soto-Miranda, M. Á., & López-Salguero, J. F. (2011) · Aesthetic Plastic Surgery · doi:10.1007/s00266-011-9826-5 · Cited by 37
The Biodurability of Covering Materials for Metallic Stents in a Bile Flow Phantom
Bang, B. W., Jeong, S. W., Lee, D. H., Lee, J. I., Lee, S. C., & Kang, S. G. (2011) · Digestive Diseases and Sciences · doi:10.1007/s10620-011-1958-6 · Cited by 34
Green, J. M., Hallab, N. J., Liao, Y.-S., Narayan, K. M. V., Schwarz, E. M., & Xie, C. L. (2013) · Current Rheumatology Reports · doi:10.1007/s11926-013-0325-3 · Cited by 33
Zhou, J., Huang, X., Zheng, D., Li, H., Herrler, T., & Li, Q. (2014) · Aesthetic Plastic Surgery · doi:10.1007/s00266-014-0299-1 · Cited by 30
Silicon chemistry and silicone breast implants
Kappel, R. M., Klunder, A. J. H., & Pruijn, G. J. M. (2013) · European Journal of Plastic Surgery · doi:10.1007/s00238-013-0914-4 · Cited by 28
Cruz, F. (2010) · Biopolymers · doi:10.5772/10264 · Cited by 28
Low, Y. K. A., Zou, X., Fang, Y. M., Wang, J., Lin, W. S., Boey, F. Y. C., & Ng, K. W. (2013) · Materials Science and Engineering C · doi:10.1016/j.msec.2013.09.029 · Cited by 28
Magnetic Resonance Imaging Compatibility of the Polymer-based Cochlear Implant
Kim, J. H., Min, K. S., An, S. K., Jeong, J., Jun, S. B., Cho, M. H., Son, Y., Cho, Z., & Kim, S. J. (2012) · Clinical and Experimental Otorhinolaryngology · doi:10.3342/ceo.2012.5.s1.s19 · Cited by 28
Wessels, V., Mené, G. L., Fischerauer, S., Kraus, T., Weinberg, A., Uggowitzer, P. J., & Löffler, J. F. (2012) · Advanced Engineering Materials · doi:10.1002/adem.201180200 · Cited by 28
Min, K. S., Lee, C. J., Jun, S. B., Kim, J.-H., Lee, S. E., Shin, J., Chang, J. W., & Kim, S. J. (2013) · Neuromodulation Technology at the Neural Interface · doi:10.1111/ner.12093 · Cited by 28
A Polymer-Based Multichannel Cochlear Electrode Array
Min, K. S., Oh, S. H., Park, M., Jeong, J., & Kim, S. J. (2014) · Otology & Neurotology · doi:10.1097/mao.0000000000000292 · Cited by 28
Fabrication and Packaging of Flexible Polymeric Microantennae for in Vivo Magnetic Resonance Imaging
Couty, M., Woytasik, M., Ginéfri, J., Rubin, A., Martincic, E., Poirier‐Quinot, M., Darrasse, L., Boumezbeur, F., Lethimonnier, F., Tatoulian, M., et al. (2012) · Polymers · doi:10.3390/polym4010656 · Cited by 27
Zheng, F., Luo, X., Verbiest, L., Verbeken, E. K., Ridder, D. J. M. K. D., & Deprest, J. A. (2006) · Neurourology and Urodynamics · doi:10.1002/nau.20317 · Cited by 25
Heran, M. K. S., Pham, T. H., Butterworth, S. A., & Robinson, A. J. (2011) · Journal of Pediatric Surgery · doi:10.1016/j.jpedsurg.2010.11.030 · Cited by 25
Roohpour, N., Wasikiewicz, J. M., Moshaverinia, A., Paul, D., Grahn, M. F., Rehman, I. U., & Vadgama, P. M. (2010) · Polymers · doi:10.3390/polym2030102 · Cited by 24
Enclosed Electronic System for Force Measurements in Knee Implants
Forchelet, D., Simoncini, M., Arami, A., Bertsch, A., Meurville, E., Aminian, K., Peter Ryser, A., & Renaud, P. (2014) · Sensors · doi:10.3390/s140815009 · Cited by 22
Design and test of a MEMS strain-sensing device for monitoring artificial knee implants
Hasenkamp, W., Thevenaz, N., Villard, J., Bertsch, A., Arami, A., Aminian, K., Terrier, A., & Renaud, P. (2013) · Biomedical Microdevices · doi:10.1007/s10544-013-9770-z · Cited by 22
Blobel, B. G. M. E., Pharow, P., & Parv, L. (2012) · Cited by 20
Mechanical and impact performance of three-phase polyamide 6 nanocomposites
Gendre, L., Njuguna, J., Abhyankar, H. A., & Ermini, V. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.08.005 · Cited by 20
Hussey, M. J., & Bagg, M. (2011) · Operative Techniques in Sports Medicine · doi:10.1053/j.otsm.2011.10.004 · Cited by 18
Lin, Z., Ruan, X., Zou, J. T., & Fu, X. H. (2014) · Chinese Journal of Mechanical Engineering · doi:10.3901/cjme.2014.01.165 · Cited by 18
Georgeu, G. A., Frame, J. D., & Frame, J. D. (2013) · Aesthetic Surgery Journal · doi:10.1177/1090820x13512855 · Cited by 18
A test microchip for evaluation of hermetic packaging technology for biomedical prosthetic implants
Kazemi, M., Basham, E. J., Sivaprakasam, M., Wang, G., Rodger, D. C., Weiland, J. D., Tai, Y. C., Liu, W., & Humayun, M. S. (2005) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/iembs.2004.1404142 · Cited by 18
Introduction to sterilization: definitions and challenges
Lerouge, S. (2012) · Elsevier eBooks · doi:10.1533/9780857096265.1 · Cited by 17
Multi-layered poly-dimethylsiloxane as a non-hermetic packaging material for medical MEMS
Lachhman, S., Zorman, C. A., & Ko, W. H. (2012) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/embc.2012.6346264 · Cited by 17
Titanium-coated polypropylene mesh (TiLoop Bra®)—an effective prevention for capsular contracture?
Bergmann, P. A., Becker, B., Mauss, K. L., Liodaki, M. E., Knobloch, J. K. ‐., Mailänder, P., & Siemers, F. (2014) · European Journal of Plastic Surgery · doi:10.1007/s00238-014-0947-3 · Cited by 16
Nanni, F. M. C., Lamastra, F. R., Pisa, F. D., & Gusmano, G. (2011) · Journal of Materials Science · doi:10.1007/s10853-011-5577-6 · Cited by 16
Surface Modification of Polypropylene Blood Oxygenator Membrane by Poly Ethylene Glycol Grafting
Abednejad, A. S., Amoabediny, G., & Ghaee, A. (2013) · Advanced materials research · doi:10.4028/www.scientific.net/amr.816-817.459 · Cited by 16
Ti1−Ag electrodes deposited on polymer based sensors
Marques, S. M., Manninen, N. K., Ferdov, S., Lanceros-Méndez, S., & Carvalho, S. (2014) · Applied Surface Science · doi:10.1016/j.apsusc.2014.08.142 · Cited by 14
Controlled delivery of antiangiogenic drug to human eye tissue using a MEMS device
Pirmoradi, F. N., Ou, K., Jackson, J. K., Letchford, K., Cui, J. Z., Wolf, K. T., Graber, F., Zhao, T., Matsubara, J. A., Burt, H. M., et al. (2013) · IEEE International Conference on Micro Electro Mechanical Systems (MEMS) · doi:10.1109/memsys.2013.6474161 · Cited by 13
Elist, J. J., Shirvanian, V., & Lemperle, G. H. (2014) · Open Journal of Urology · doi:10.4236/oju.2014.47016 · Cited by 13
Hinz, J. M., Molder, J. M., Hanekop, G., Weyland, A., Popov, A., Bauer, M., & Kazmaier, S. (2013) · The International Journal of Artificial Organs · doi:10.5301/ijao.5000208 · Cited by 13
de Beeck, M. O., Jarboui, A., Cauwe, M., Declercq, H., Uytterhoeven, G., Cornelissen, M., Vanfleteren, J., & Hoof, C. A. V. (2013) · Ghent University Academic Bibliography (Ghent University) · Cited by 10
Tissue Ingrowth Into Perforated Polymethylmethacrylate Orbital Implants
Miyashita, D., Chahud, F., Silva, G. E. B., de Albuquerque, V. B., Garcia, D. M., & Cruz, A. A. V. E. (2013) · Ophthalmic Plastic and Reconstructive Surgery · doi:10.1097/iop.0b013e318285b4c8 · Cited by 9
Fabrication and packaging of a fully implantable biosensor array
Baj-Rossi, C., Kilinc, E. G., Ghoreishizadeh, S. S., Casarino, D., Jost, T. R., Dehollain, C., Grassi, F., Pastorino, L., Micheli, G. D., & Carrara, S. (2013) · IEEE Biomedical Circuits and Systems Conference (BioCAS) · doi:10.1109/biocas.2013.6679665 · Cited by 9
Energy harvesting using nana scale dual layers PVDF film for blood artery
Fadhil, N., Saber, D., & Patra, P. (2013) · IEEE Long Island Systems, Applications and Technology Conference (LISAT) · doi:10.1109/lisat.2013.6578250 · Cited by 9
Packaging of electronic devices for long-term implantation
Kirsten, S., Uhlemann, J., Braunschweig, M., & Wolter, K.-J. (2012) · International Spring Seminar on Electronics Technology · doi:10.1109/isse.2012.6273121 · Cited by 8
2012 ACVIM Forum Research Abstracts Program
(2012) · Journal of Veterinary Internal Medicine · doi:10.1111/j.1939-1676.2012.00937.x · Cited by 8
The behavior of new hydrophilic composite bone cements for immediate loading of dental implant
Ma, Y., Wang, R., Cheng, X., Liu, Z., & Zhang, Y. (2013) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-013-0742-1 · Cited by 7
McDonnell, G. E. (2012) · Wiley-Blackwell eBooks · doi:10.1002/9781118425831.ch15d · Cited by 6
Low-cost, flexible polymer arrays for long-term neuronal culture
Hogan, N. C., Franzesi, G. T., Abudayyeh, O. O., Taberner, A. J., & Hunter, I. W. (2012) · Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) · doi:10.1109/embc.2012.6346053 · Cited by 6
Silicon micro heater based tagging module and the biocompatible packaging for capsule endoscope
Ruiqi, L., Chandrappan, J., Vaidyanathan, K., & Win, S. S. (2011) · IEEE Electronic Components and Technology Conference (ECTC) · doi:10.1109/ectc.2011.5898679 · Cited by 5
Energy Harvesting using Nano-fibers PVDF\Graphene composite for Medical implanted devices
Fadhil, N., Saber, D., Cox, P. J., Vanashi, K., & Patra, P. (2014) · University of Bridgeport ScholarWorks (University of Bridgeport) · Cited by 5
Biomaterials and Its Characterization
Pal, S. (2013) · Springer eBooks · doi:10.1007/978-1-4614-6255-2_4 · Cited by 3
Najafi, M., Mohammadzadeh, N., & Neishaboury, M. (2014) · Archives of Breast Cancer · doi:10.19187/abc.20141273-76 · Cited by 3
Chugay, N. V., Chugay, P. N., & Shiffman, M. A. (2014) · Springer eBooks · doi:10.1007/978-3-319-04957-1_1 · Cited by 3
Implantable Medical Devices MRI Safe
Renzo, D. M., & Hecker, B. (2013) · Studies in health technology and informatics · doi:10.3233/978-1-61499-268-4-96 · Cited by 2
Comparison of Packing Material in Middle Ear Mucosal Trauma
Hachem, R. A., Perez, E. R., Bueno, I., Water, T. R. V. D., & Angeli, S. I. (2012) · Otolaryngology · doi:10.1177/0194599812451438a148 · Cited by 2
Hao, Z., & Hong, W. (2012) · doi:10.1109/hsic.2012.6213011 · Cited by 2
Parida, P. K., & Mishra, S. (2012) · Cited by 2
Biomaterial-based strategies for craniofacial tissue engineering
Kretlow, J. D. (2010) · Rice Research Repository (Rice University) · Cited by 2
Challenges for the Future Neuroprosthetic Implants
Kim, J. H., Min, K. S., Jeong, J., & Kim, S. J. (2011) · World Congress on Medical Physics and Biomedical Engineering, September 7 - 12, 2009, Munich, Germany · doi:10.1007/978-3-642-23508-5_314 · Cited by 1
Pyrethroid-laden textiles for protection from biting insects
Hayes, D. G. (2011) · Elsevier eBooks · doi:10.1533/9780857092878.404 · Cited by 1
Spelta, C. W., Tan, R., Picard, J. A., & Gummow, B. (2012) · ResearchOnline at James Cook University (James Cook University) · Cited by 1
Fabrication and Assembly of Ultra Thin Flexible Active Printed Circuits
Zhang, T. (2006) · Cited by 1
Research works printed but not linked: 13
- Kammula R. G., 2001, Med. Device Diagn. Ind., 23, 82
- Register O. o. t. F., 2010, Code of Federal Regulations, Title 21, Food and Drugs, Pt. 800–1299, Revised as of April 1, 2010
- Kuo A., 1999, Polymer Data Handbook
- 10.7537/j.issn.1545-1003 · doi:10.7537/j.issn.1545-1003
- Jeong J., 2012, Sens. Mater., 24, 189
- 10.1111/j.1572-0241.2003.07398.x · doi:10.1111/j.1572-0241.2003.07398.x · Paper page
- Chang J. H.-C., 2014, IEEE 27th International Conference onMicro Electro Mechanical Systems (MEMS), 1127
- Dutta S. R. B., 2013, Int. J. Rec. Sci. Res., 4, 1661
- Kirsten S., 2012, 35th International Spring Seminar on Electronics Technology (ISSE), 123
- de Beeck M. O., 2013, 2013 European Microelectronics Packaging Conference (EMPC), 1
- Imenes K., 2012, 4th Electronic System-Integration Technology Conference (ESTC), 1
- Kubyshkina G., 2011, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, 3, 11
- Sundaram V., 2011, Proceedings of the 61st IEEE Electronic Components and Technology Conference (ECTC), 1308
Cited by
Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications
Rajak, D., Pagar, D., Menezes, P., & Linul, E. (2019) · Polymers · doi:10.3390/polym11101667 · Cited by 1,706
Review on titanium and titanium based alloys as biomaterials for orthopaedic applications
Kaur, M., & Singh, K. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.04.064 · Cited by 1,451
Wickramasinghe, S., Do, T., & Tran, P. (2020) · Polymers · doi:10.3390/polym12071529 · Cited by 1,052
Performance properties and applications of polytetrafluoroethylene (PTFE)—a review
Dhanumalayan, E., & Joshi, G. M. (2018) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-018-0023-8 · Cited by 648
Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics
Heng, W., Solomon, S., & Gao, W. (2022) · Advanced Materials · doi:10.1002/adma.202107902 · Cited by 609
Metadata
- Authors
- Teo, A. J. T., Mishra, A., Park, I., Kim, Y.-J., Park, W.-T., & Yoon, Y.-J.
- Affiliations
- Nanyang Technological University (SG)
- Korea Advanced Institute of Science and Technology (KR)
- Seoul National University of Science and Technology (KR)
- Corresponding author
- Park, Woo-Tae
- Yoon, Yong-Jin
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-03-04
- Volume
- 2
- Issue
- 4
- Pages
- 454-472
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W2335675049
- Cited by
- 778
- References
- 149
- Citations by year
- 2026: 46 · 2025: 90 · 2024: 107 · 2023: 85 · 2022: 84 · 2021: 93 · 2020: 81 · 2019: 75 · 2018: 65 · 2017: 44 · 2016: 8
- FWCI
- 26.15
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Biomaterials Science & Engineering (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Ministry of Education - Singapore (RG35/12, RGC4/13)
- Science and Engineering Research Council, Agency for Science, Technology and Research (SERC1121770039)
- National Research Foundation of Korea funded by the Ministry of Science, ICT & Future Planning (NRF-2013M2A2A9043274)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Synthesis and properties of polymers
- Keywords
- polymeric biomaterials, biomedical implants, biocompatible polymers, device packaging, polymer substrates, polyvinylidene fluoride, polyethylene, polypropylene, polydimethylsiloxane, parylene, polyamide, polytetrafluoroethylene, poly(methyl methacrylate), polyimide, polyurethane, liquid crystalline polymers, polymer nanocomposites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.