Polymeric Biomaterials for Medical Implants and Devices
The DOI matches its Crossref record; 147 of the 149 references it cites were found in a registry or an index.
Abstract
In this review article, we focus on the various types of materials used in biomedical implantable devices, including the polymeric materials used as substrates and for the packaging of such devices. Polymeric materials are used because of the ease of fabrication, flexibility, and their biocompatible nature as well as their wide range of mechanical, electrical, chemical, and thermal behaviors when combined with different materials as composites. Biocompatible and biostable polymers are extensively used to package implanted devices, with the main criteria that include gas permeability and water permeability of the packaging polymer to protect the electronic circuit of the device from moisture and ions inside the human body. Polymeric materials must also have considerable tensile strength and should be able to contain the device over the envisioned lifetime of the implant. For substrates, structural properties and, at times, electrical properties would be of greater concern. Section 1 gives an introduction of some medical devices and implants along with the material requirements and properties needed. Different synthetic polymeric materials such as polyvinylidene fluoride, polyethylene, polypropylene, polydimethylsiloxane, parylene, polyamide, polytetrafluoroethylene, poly(methyl methacrylate), polyimide, and polyurethane have been examined, and liquid crystalline polymers and nanocomposites have been evaluated as biomaterials that are suitable for biomedical packaging (section 2). A summary and glimpse of the future trend in this area has also been given (section 3). Materials and information used in this manuscript are adapted from papers published between 2010 and 2015 representing the most updated information available on each material.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Apart from the conductive functional materials, the insulative packaging materials are also a critical part of sensing recorders. Many popular insulating soft materials have been used for packaging sensing electrodes,[318] such as PI,[319,320] PDMS,[321,322] hydrogel,[323,324] etc., as they have suitable mechanical, dielectric and biological properties.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [318]
Citations
Cites
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Vepari, C., & Kaplan, D. L. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.013 · Cited by 2,561
The piezoelectricity of poly (vinylidene fluoride)
Kawai, H. (1969) · Japanese Journal of Applied Physics · doi:10.1143/jjap.8.975 · Cited by 2,044
Biomedical applications of polymer-composite materials: a review
Ramakrishna, S., Mayer, J., Wintermantel, E., & Leong, K. W. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00241-4 · Cited by 1,642
A review of stimuli-responsive shape memory polymer composites
Meng, H., & Li, G. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.023 · Cited by 1,190
Superconductivity in 4 Angstrom Single-Walled Carbon Nanotubes
Tang, Z. K., Zhang, L., Wang, N., Zhang, X. X., Wen, G. H., Li, G. D., Wang, J. N., Chan, C. T., & Sheng, P. (2001) · Science · doi:10.1126/science.1060470 · Cited by 816
Ambulatory esophageal pH monitoring using a wireless system
Pandolfino, J. (2003) · The American Journal of Gastroenterology · doi:10.1016/s0002-9270(03)00062-5 · Cited by 528
Hassler, C., Boretius, T., & Stieglitz, T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22169 · Cited by 501
Polyurethanes in Biomedical Applications
Burke, A., & Hasirci, N. (2004) · Advances in Experimental Medicine and Biology · doi:10.1007/978-0-306-48584-8_7 · Cited by 494
Development of Implantable Medical Devices: From an Engineering Perspective
Joung, Y.-H. (2013) · International Neurourology Journal · doi:10.5213/inj.2013.17.3.98 · Cited by 367
Research works printed but not linked: 14
- Kammula R. G., 2001, Med. Device Diagn. Ind., 23, 82
- Register O. o. t. F., 2010, Code of Federal Regulations, Title 21, Food and Drugs, Pt. 800–1299, Revised as of April 1, 2010
- Kim J., 2012, 5th European Conference of the International Federation for Medical and Biological Engineering, 1214
- Kuo A., 1999, Polymer Data Handbook
- 10.7537/j.issn.1545-1003 · doi:10.7537/j.issn.1545-1003
- Jeong J., 2012, Sens. Mater., 24, 189
- 10.1111/j.1572-0241.2003.07398.x · doi:10.1111/j.1572-0241.2003.07398.x · Paper page
- Chang J. H.-C., 2014, IEEE 27th International Conference onMicro Electro Mechanical Systems (MEMS), 1127
- Dutta S. R. B., 2013, Int. J. Rec. Sci. Res., 4, 1661
- Kirsten S., 2012, 35th International Spring Seminar on Electronics Technology (ISSE), 123
- de Beeck M. O., 2013, 2013 European Microelectronics Packaging Conference (EMPC), 1
- Imenes K., 2012, 4th Electronic System-Integration Technology Conference (ESTC), 1
- Kubyshkina G., 2011, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, 3, 11
- Sundaram V., 2011, Proceedings of the 61st IEEE Electronic Components and Technology Conference (ECTC), 1308
Cited by
Items 101–200 of 776
Wu, W., Ouyang, Q., Liu, H., & Huang, Q. (2022) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2022.130018 · Cited by 60
Smart implants: 4D-printed shape-morphing scaffolds for medical implantation
Qu, G., Huang, J., Gu, G., Li, Z., Wu, X., & Ren, J. (2023) · International Journal of Bioprinting · doi:10.18063/ijb.764 · Cited by 68
“Their future demand is also expected to increase[4].”
BackgroundInjectable Conductive Hydrogels with Tunable Degradability as Novel Implantable Bioelectrodes
Park, J., Lee, S., Lee, M., Kim, H., & Lee, J. Y. (2023) · Small · doi:10.1002/smll.202300250 · Cited by 59
Covalent conjugation of bioactive peptides to graphene oxide for biomedical applications
Eckhart, K. E., Holt, B. D., Laurencin, M. G., & Sydlik, S. A. (2019) · Biomaterials Science · doi:10.1039/c9bm00867e · Cited by 60
Patient-specific 3D-printed Splint for Mallet Finger Injury
Zolfagharian, A., Gregory, T. M., Bodaghi, M., Gharaie, S., & Fay, P. (2020) · International Journal of Bioprinting · doi:10.18063/ijb.v6i2.259 · Cited by 57
“The PLA is used in this study as it has been found to be feasible for the production of scaffolds with different architectures and controlled porosities which are tailored for use as temporary fixtures in biomedical applications[33,34].”
MethodYan, K., Xu, F., Wei, W., Yang, C., Wang, D., & Shi, X. (2021) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2021.111711 · Cited by 64
You, K., Gao, B., Wang, M., Wang, X., Okoro, K. C., Rakhimbekzoda, A., & Feng, Y. (2022) · Journal of Materials Chemistry B · doi:10.1039/d1tb02417e · Cited by 59
Zwawi, M. (2022) · Engineering Research Express · doi:10.1088/2631-8695/ac8ae2 · Cited by 65
Zhijiang, C., Ping, X., He, S., & Zhu, C. (2019) · Materials Letters · doi:10.1016/j.matlet.2019.01.010 · Cited by 56
Emerging polymeric biomaterials and manufacturing techniques in regenerative medicine
Xia, D., Chen, J., Zhang, Z., & Dong, M. (2022) · Aggregate · doi:10.1002/agt2.176 · Cited by 65
Recent advances in TENGs collecting acoustic energy: From low-frequency sound to ultrasound
Zhou, S., Jia, C., Shu, G., Guan, Z., Wu, H., Li, J., & Ou‐Yang, W. (2024) · Nano Energy · doi:10.1016/j.nanoen.2024.109951 · Cited by 59
Saba, T., Saad, K. S. K., & Rashid, A. B. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e37976 · Cited by 60
Brites, M. D. M., Cerón, A. A., da Costa, S. M., de Oliveira, R. C., Ferraz, H. G., Catalani, L. H., & da Costa, S. A. (2019) · Enzyme and Microbial Technology · doi:10.1016/j.enzmictec.2019.109384 · Cited by 59
Sharma, S., Gupta, V., & Mudgal, D. (2022) · Polymer Composites · doi:10.1002/pc.26809 · Cited by 54
Meshram, J. V., Koli, V. B., Phadatare, M., & Pawar, S. H. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.12.043 · Cited by 57
Femtosecond-Laser-Based 3D Printing for Tissue Engineering and Cell Biology Applications
Ho, C. M. B., Mishra, A., Hu, K., An, J., Kim, Y., & Yoon, Y. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00438 · Cited by 55
Self-citationBiodegradable bone implants as a new hope to reduce device-associated infections-a systematic review
Paiva, J. C. C., Oliveira, L., Vaz, M. F., & Costa-de-Oliveira, S. (2022) · Bioengineering · doi:10.3390/bioengineering9080409 · Cited by 53
“They have overcome metals in some intrinsic properties, such as elasticity, flexibility, longevity and bio-inertness [48].”
BackgroundLi, Y., Liu, W., Liu, Y., Ren, Y., Wang, Z., Zhao, B., Huang, S., Xu, J., & Li, Z. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120336 · Cited by 53
Beyond Tissue replacement: The Emerging role of smart implants in healthcare
Abyzova, E., Dogadina, E., Rodriguez, R. D. D., Petrov, I., Kolesnikova, Y., Zhou, M., Liu, C., & Sheremet, E. S. (2023) · Materials Today Bio · doi:10.1016/j.mtbio.2023.100784 · Cited by 75
“If used for device packaging, the material must have Young ’ s modulus similar to surrounding tissue, high tensile strength, good flexibility, and complete impermeability [275].”
Grazioli, D., Zadin, V., Brandell, D., & Simone, A. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.07.146 · Cited by 53
Paez‐Mayorga, J., Capuani, S., Hernandez, N., Farina, M., Chua, C. Y. X., Blanchard, R., Sizovs, A., Liu, H., Fraga, D. W., Niles, J. A., et al. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2020.120232 · Cited by 55
Polymers for implantable devices
Ershad‐Langroudi, A., Babazadeh, N., Alizadegan, F., Mousaei, S. M., & Moradi, G. (2024) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2024.03.030 · Cited by 56
Chung, Y., Jeong, J., Hwang, J., Kim, Y., Park, B., Cho, D. S., Cho, Y., Suh, S., Choi, B., Park, H.-M., et al. (2024) · Joule · doi:10.1016/j.joule.2024.06.016 · Cited by 54
Self-citationWilson, J. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-102205-4.00001-5 · Cited by 56
Ismail, H., & Mohamad, H. (2021) · Materials · doi:10.3390/ma14185193 · Cited by 57
Shilov, S. Y., Rozhkova, Y. A., Markova, L. N., Анатольевич, Т. М., Vindokurov, I. V., & Silberschmidt, V. V. (2022) · Polymers · doi:10.3390/polym14193958 · Cited by 58
“Biocompatibility refers to the three most important characteristics of the material: (i) after implantation, the material should demonstrate the expected functionality; (ii) the body’s response to the implant should correspond to its functional purpose; and (iii) the body’s response to an implant can differ depending…”
BackgroundCeresa, C., Rinaldi, M., Tessarolo, F., Maniglio, D., Fedeli, E., Tambone, E., Caciagli, P., Banat, I. M., Rienzo, M. A. D. D., & Fracchia, L. (2021) · Frontiers in Microbiology · doi:10.3389/fmicb.2020.545654 · Cited by 65
The Role of Biopolymer-Based Materials in Obstetrics and Gynecology Applications: A Review
Jummaat, F. B., Yahya, E. B., Khalil, H. P. S. A., Adnan, A. S., Alqadhi, A. M., Abdullah, C. K., Atty Sofea, A. K., Olaiya, N. G., & Abdat, M. (2021) · Polymers · doi:10.3390/polym13040633 · Cited by 58
“The application of biopolymer-based materials in obstetrics and gynecology have been a thrust area of research in the past few years due to the unique and superior properties that many biopolymers exhibit [102].”
Kunrath, M. F., Hübler, R., Shinkai, R. S. A., & Teixeira, E. R. (2018) · ChemistrySelect · doi:10.1002/slct.201801459 · Cited by 48
Artificial bone scaffolds and bone joints by additive manufacturing: A review
Gupta, K., & Meena, K. (2023) · Bioprinting · doi:10.1016/j.bprint.2023.e00268 · Cited by 58
Li, C., Cauwe, M., Yang, Y., Schaubroeck, D., Mader, L., & Op de Beeck, M. (2019) · Coatings · doi:10.3390/coatings9090579 · Cited by 46
Monolithic digital patterning of polyimide by laser-induced pyrolytic jetting
Lim, J., Park, S., Cho, H., Lee, Y., Ha, I., Kim, Y., Hwang, E., Lee, H., Shin, J., Kwon, J., et al. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.131050 · Cited by 46
Self-citationLiquid crystal polymer (LCP)-based neural prosthetic devices
Gwon, T. M., Kim, C., Shin, S., Park, J. H., Kim, J. H., & Kim, S. J. (2016) · Biomedical Engineering Letters · doi:10.1007/s13534-016-0229-z · Cited by 50
“Properties of silicon, silica and polymeric biocompatible materials [5, 34, 39, 55-57].”
BackgroundInfluentialRadtke, A., Topolski, A., Jędrzejewski, T., Kozak, W., Sadowska, B., Więckowska-Szakiel, M., Szubka, M., Talik, E., Nielsen, L. P., & Piszczek, P. (2017) · Nanomaterials · doi:10.3390/nano7080197 · Cited by 46
Winnacker, M., Beringer, A., Gronauer, T. F., Güngör, H. H., Reinschlüssel, L. J., Rieger, B., & Sieber, S. A. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201900091 · Cited by 46
Real-time measurement of tumour hypoxia using an implantable microfabricated oxygen sensor
Marland, J. R. K., Gray, M., Dunare, C. C., Blair, E. O., Tsiamis, A., Sullivan, P., González‐Fernández, E., Greenhalgh, S. N., Gregson, R., Clutton, R. E., et al. (2020) · Sensing and Bio-Sensing Research · doi:10.1016/j.sbsr.2020.100375 · Cited by 54
Engineering biomaterials to prevent post-operative infection and fibrosis
Josyula, A., Parikh, K. S., Pitha, I., & Ensign, L. M. (2021) · Drug Delivery and Translational Research · doi:10.1007/s13346-021-00955-0 · Cited by 48
Gels, jets, mosquitoes, and magnets: a review of implantation strategies for soft neural probes
Apollo, N. V., Murphy, B. B., Prezelski, K., Driscoll, N., Richardson, A. G., Lucas, T. H., & Vitale, F. (2020) · Journal of Neural Engineering · doi:10.1088/1741-2552/abacd7 · Cited by 52
Characterisation of Selected Materials in Medical Applications
Kroczek, K., Turek, P., Mazur, D., Szczygielski, J., Filip, D., Brodowski, R., Balawender, K., Przeszłowski, Ł., Lewandowski, B., Orkisz, S., et al. (2022) · Polymers · doi:10.3390/polym14081526 · Cited by 56
Substrate-independent and widely applicable deposition of antibacterial coatings
Egghe, T., Morent, R., Hoogenboom, R., & Geyter, N. D. (2022) · Trends in biotechnology · doi:10.1016/j.tibtech.2022.06.003 · Cited by 44
Assessment of chitosan/pectin-rich vegetable waste composites for the active packaging of dry foods
Merino, D., Bellassi, P., Paul, U. C., Morelli, L., & Athanassiou, A. (2023) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2023.108580 · Cited by 54
The Influence of Mucin-Based Artificial Saliva on Properties of Polycaprolactone and Polylactide
Łysik, D., Mystkowska, J., Markiewicz, G., Deptuła, P., & Bucki, R. (2019) · Polymers · doi:10.3390/polym11111880 · Cited by 45
“Usually, most of them act simultaneously and it is difficult to predict the behavior of the material in vivo [3,5].”
BackgroundCeramic packaging in neural implants
Shen, K., & Maharbiz, M. M. (2021) · Journal of Neural Engineering · doi:10.1088/1741-2552/abd683 · Cited by 50
Sang, S., Cheng, R., Cao, Y., Yan, Y., Shen, Z., Zhao, Y., & Han, Y. (2022) · Journal of Zhejiang University SCIENCE B · doi:10.1631/jzus.b2100155 · Cited by 47
“Various CNT composite scaffolds have been de‐ veloped (Teo et al., 2016).”
BackgroundSun, J., Zhuang, J., Shi, J., Kormakov, S., Liu, Y., Yang, Z., & Wu, D. (2019) · Journal of Materials Science · doi:10.1007/s10853-019-03472-1 · Cited by 48
Li, W., Wu, H., Huang, Y., Yao, Y., Hou, Y., Teng, Q., Cai, M., & Wu, J. (2024) · Angewandte Chemie International Edition · doi:10.1002/anie.202408250 · Cited by 42
Abdelhafeez, I. A., Zhou, X., Yao, Q., Yu, Z., Gong, Y., & Chen, J. (2020) · ACS Omega · doi:10.1021/acsomega.9b03994 · Cited by 42
“18,46 The transparent PDMS sponge works as a light-absorbing and -intensifying material and lets the incident light smoothly permeate through it, whereby the photogenerated charge carriers are inducibly produced and the photocatalytic activity is subsequently enhanced.”
Progress on Medical Implant: A Review and Prospects
Pandey, A., & Sahoo, S. (2022) · Journal of Bionic Engineering · doi:10.1007/s42235-022-00284-z · Cited by 41
Kanjwal, M. A., & Ghaferi, A. A. A. (2022) · Sensors · doi:10.3390/s22228661 · Cited by 43
“[185,280,286,287], and improved many physical and chemical properties [185,280,292] as”
InfluentialRoom-temperature-processed perovskite solar cells surpassing 24% efficiency
Yi, A., Chae, S., Luong, H. M., Lee, S. H., Lee, H., Yoon, H., Kim, D., Kim, H. J., & Nguyen, T. (2024) · Joule · doi:10.1016/j.joule.2024.04.002 · Cited by 44
Shitole, A. A., Giram, P. S., Raut, P. W., Rade, P. P., Khandwekar, A. P., Sharma, N., & Garnaik, B. (2019) · Journal of Biomaterials Applications · doi:10.1177/0885328219832984 · Cited by 42
Jeong, S., Heo, S., Kang, M., & Kim, H. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109178 · Cited by 44
Crosslinking Trends in Multicomponent Hydrogels for Biomedical Applications
Dodda, J. M., Azar, M. G., & Sadiku, E. R. (2021) · Macromolecular Bioscience · doi:10.1002/mabi.202100232 · Cited by 43
Shivam, K., Selvam, A., Sangam, S., Majood, M., Pahari, S., Patra, R., Sharma, A. K., & Mukherjee, M. (2023) · Biomaterials Advances · doi:10.1016/j.bioadv.2023.213395 · Cited by 41
Barui, A. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-102179-8.00003-x · Cited by 53
Material Design and Surface Engineering for Bio-implants
Ralls, A. M., Kumar, P., Misra, M., & Menezes, P. L. (2019) · JOM · doi:10.1007/s11837-019-03687-2 · Cited by 50
Marsili, L., Bo, M. D., Berti, F., & Toffoli, G. (2021) · Pharmaceutics · doi:10.3390/pharmaceutics13111876 · Cited by 44
Deposition of Chitosan on Plasma-Treated Polymers—A Review
Vesel, A. (2023) · Polymers · doi:10.3390/polym15051109 · Cited by 43
“Polymers can also be used for biomedical packaging when they have to meet special criteria regarding gas and water permeability and ensure long-term sterility [11].”
BackgroundNylons with Applications in Energy Generators, 3D Printing and Biomedicine
Arioli, M., Puiggalí, J., & Franco, L. (2024) · Molecules · doi:10.3390/molecules29112443 · Cited by 43
“…bio-compatibility, mechanical strength and versatility have paved the way for groundbreaking advances in dental implants, catheters and sutures [8–10]. bio-compatibility, mechanical strength and versatility have These materials exhibit favorable properties for mimicking the structural…”
BackgroundVicentini, N., Gatti, T., Salerno, M., Suemi, Y., Bellon, M., Gallio, S., Marega, C., Filippini, F., & Menna, E. (2018) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2018.04.042 · Cited by 42
“Composites of CNSs and biocompatible polymers can c ombine the properties of the two constituents and act as functional materials for a number of technological applications,[7, 8] which include medical devices and implants [9-12], tissue engineering [13-24], drug delivery [25, 26], bio, green and wearable electronics…”
Zhou, Q., Ge, L., Guimarães, C. F., Kühn, P., Yang, L., & van Rijn, P. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800504 · Cited by 39
Seok, S. (2021) · Micromachines · doi:10.3390/mi12091020 · Cited by 40
Wool Keratin Nanofibers for Bioinspired and Sustainable Use in Biomedical Field
Ramírez, D. O. S., Vineis, C., Maya, I. C., Tonetti, C., Guarino, V., & Varesano, A. (2022) · Journal of Functional Biomaterials · doi:10.3390/jfb14010005 · Cited by 38
“In particular, polyamides have been found to be safe for use as scaffolds and nanofillers to improve the mechanical properties of composite materials [50].”
BackgroundDesign and Scalable Fabrication of Hollow SU-8 Microneedles for Transdermal Drug Delivery
Mishra, R., Maiti, T. K., & Bhattacharyya, T. K. (2018) · IEEE Sensors Journal · doi:10.1109/jsen.2018.2840335 · Cited by 40
Structural polymer biomaterials
Shirvan, A. R., Nouri, A., & Wen, C. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-818831-6.00010-0 · Cited by 56
Sharma, S., & Basu, B. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2021.121331 · Cited by 39
Dual-functional antibacterial hybrid film with antifouling and NIR-activated bactericidal properties
Qu, Y., Zhu, X., Kong, R., Lu, K., Fan, T., Yu, Q., & Wang, G. (2022) · Composites Part B Engineering · doi:10.1016/j.compositesb.2022.110143 · Cited by 38
Radiopacity Enhancements in Polymeric Implant Biomaterials: A Comprehensive Literature Review
Emonde, C. K., Eggers, M.-E., Wichmann, M., Hurschler, C., Ettinger, M., & Denkena, B. (2024) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.3c01667 · Cited by 37
Paul, T. J., Hoffmann, Z., Wang, C., Shanmugasundaram, M., DeJoannis, J., Shekhtman, A. G., Lednev, I. K., Yadavalli, V. K., & Prabhakar, R. S. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b01066 · Cited by 39
Carboxymethylation of pectin: Optimization, characterization and in-vitro drug release studies
Muthukumaran, C., Kanmani, B. R., Sharmila, G., Narasimhan, M. K., & Muthusamy, S. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.04.042 · Cited by 41
Pereira, A. T., Henriques, P. C., Costa, P. C., Martins, M. C. L., Magalhães, F. D., & Gonçalves, I. C. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107819 · Cited by 40
Flexible neural interfaces for brain implants—the pursuit of thinness and high density
Araki, T., Bongartz, L. M., Kaiju, T., Takemoto, A., Tsuruta, S., Uemura, T., & Sekitani, T. (2020) · Flexible and Printed Electronics · doi:10.1088/2058-8585/abc3ca · Cited by 42
Polyimide as a biomedical material: advantages and applications
Shu, J., Zhou, Z., Liang, H., & Yang, X. (2024) · Nanoscale Advances · doi:10.1039/d4na00292j · Cited by 38
Gas Transport in Glassy Polymers: Prediction of Diffusional Time Lag
Minelli, M., & Sarti, G. C. (2018) · Membranes · doi:10.3390/membranes8010008 · Cited by 37
“The analysis of the solubility and the transport properties of gases and vapors in polymers has a practical utility in various industrial applications, such as gas separation and purification [1,2], ion exchange [3,4], biomedical [5], sensing [6] and packaging operations [7].”
BackgroundMishra, R., Maiti, T. K., & Bhattacharyya, T. K. (2018) · Journal of Micromechanics and Microengineering · doi:10.1088/1361-6439/aad301 · Cited by 39
Ink‐Based Additive Nanomanufacturing of Functional Materials for Human‐Integrated Smart Wearables
Xu, S., & Wu, W. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.202000117 · Cited by 36
All-Oxide p–n Junction Thermoelectric Generator Based on SnOx and ZnO Thin Films
Vieira, E. M. F., Silva, J., Veltruská, K., Istrate, M. C., Lenzi, V., Trifiletti, V., Lorenzi, B., Matolín, V., Ghica, C., Marques, L. S. A., et al. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c09748 · Cited by 36
Lee, D. N., Gwon, K., Kim, Y., Cho, H., & Lee, S. (2021) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2021.07.002 · Cited by 35
Self-citationBiomaterial and biocompatibility evaluation of tunicate nanocellulose for tissue engineering
Apelgren, P., Sämfors, S., Säljö, K., Mölne, J., Gatenholm, P., Troedsson, C., Thompson, E. M., & Kölby, L. (2022) · Biomaterials Advances · doi:10.1016/j.bioadv.2022.212828 · Cited by 37
Biodegradable Conducting Polymer-Based Composites for Biomedical Applications—A Review
Khan, T., Vadivel, G., Ramasamy, B., Murugesan, G., & Sebaey, T. A. (2024) · Polymers · doi:10.3390/polym16111533 · Cited by 37
“…they are natural insulators, which restricts their usage in several biological applications where biomaterial conductivity is required [8]. early 20th century, various biomaterials, including synthetic polymers, ceramics, alloys, metals, and carbons, have been extensively used [12,13].”
BackgroundImplantable Medical Devices, Biomaterials, and the Foreign Body Response: A Surgical Perspective
Kalashnikov, N., Barralet, J. E., & Vorstenbosch, J. (2025) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.37983 · Cited by 41
Evaluating polymeric biomaterial–environment interfaces by Langmuir monolayer techniques
Schöne, A., Roch, T., Schulz, B. W., & Lendlein, A. (2017) · Journal of The Royal Society Interface · doi:10.1098/rsif.2016.1028 · Cited by 38
Rapid Prototyping of Polymeric Nanopillars by 3D Direct Laser Writing for Controlling Cell Behavior
Buch‐Månson, N., Spangenberg, A., Gómez, L. P. C., Malval, J., Soppera, O., & Martinez, K. L. (2017) · Scientific Reports · doi:10.1038/s41598-017-09208-y · Cited by 36
Challenges and Issues of Using Polymers as Structural Materials in MEMS: A Review
Li, Y. (2018) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2018.2837684 · Cited by 39
“A good comparison between different biodegradable polymers for implantable devices can be found in [112].”
BackgroundSong, W., Zeng, Q., Yin, X., Zhu, L., Gong, T., & Pan, C. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.09.133 · Cited by 38
Functional Polyimide-Based Electrospun Fibers for Biomedical Application
Serbezeanu, D., Vlad‐Bubulac, T., Rusu, D., Pîrcălăbioru, G. G., Samoilă, I., Dinescu, S., & Aflori, M. (2019) · Materials · doi:10.3390/ma12193201 · Cited by 36
A fiber-shaped light-emitting pressure sensor for visualized dynamic monitoring
Zhou, X., Xu, X., Zuo, Y., Liao, M., Shi, X., Chen, C., Xie, S., Zhou, P., Sun, X., & Peng, H. (2019) · Journal of Materials Chemistry C · doi:10.1039/c9tc05653j · Cited by 34
Strong Hydration at the Poly(ethylene glycol) Brush/Albumin Solution Interface
Zhang, K., Huang, H., Hung, H., Leng, C., Wei, S., Crisci, R., Jiang, S., & Chen, Z. (2020) · Langmuir · doi:10.1021/acs.langmuir.9b03680 · Cited by 36
From softening polymers to multimaterial based bioelectronic devices
Ecker, M., Joshi-Imre, A., Modi, R., Frewin, C. L., Garcia-Sandoval, A., Maeng, J., Gutierrez-Heredia, G., Pancrazio, J. J., & Voit, W. E. (2019) · Multifunctional Materials · doi:10.1088/2399-7532/aaed58 · Cited by 34
Pillar[n]arene-based polymeric systems for biomedical applications
Zhou, L., Cao, S., Liu, C., Zhang, H., & Zhao, Y. (2023) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2023.215260 · Cited by 35
James, B. D., Ward, C. P., Hahn, M. E., Thorpe, S. J., & Reddy, C. M. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c05534 · Cited by 45
“18,81 Moreover, k d will be a significant parameter for the reliable design of biodegradable plastic products (e.g., transient electronics 82 − 86 and biomedical devices 87 − 89 ), in which the end-of-life disposal is the partial or complete degradation of the item.”
BackgroundWu, Y., Li, Z., Wang, H., Zheng, Z., & Du, B. X. (2024) · ACS Applied Polymer Materials · doi:10.1021/acsapm.4c00251 · Cited by 34
Dong, Y., Xiong, X., Lu, X., Wu, Z., & Chen, H. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb01464j · Cited by 34
A linear stepping endovascular intervention robot with variable stiffness and force sensing
He, C., Wang, S., & Zuo, S. (2018) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-018-1722-x · Cited by 34
“The Young’s modulus of the traditional catheter ranges from 360 to 870 Mpa, depending on the materials adopted [27].”
BackgroundPolymer nanocomposites for biomedical applications
Rahmani, S., Maroufkhani, M., Mohammadzadeh-Komuleh, S., & Khoubi‐Arani, Z. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-824147-9.00007-8 · Cited by 52
Ha, Y., Seo, H. C., Kim, Y., Khil, M., Cho, J. W., Lee, J., & Jung, Y. C. (2019) · Macromolecular Research · doi:10.1007/s13233-020-8027-y · Cited by 34
Self-citationWater near bioinert self-assembled monolayers
Chang, R., Asatyas, S., Lkhamsuren, G., Hirohara, M., Mondarte, E. A. Q., Suthiwanich, K., Sekine, T., & Hayashi, T. (2018) · Polymer Journal · doi:10.1038/s41428-018-0075-1 · Cited by 35
Fabrication of stable biomimetic coating on PDMS surface: Cooperativity of multivalent interactions
Zhao, Y., Wen, J., Ge, Y., Zhang, X., Shi, H., Yang, K., Gao, X. Y., Shi, S., & Gong, Y. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.11.056 · Cited by 32
Smart Drug Release from Medical Devices
Alvarez‐Lorenzo, C., & Concheiro, Á. (2019) · Journal of Pharmacology and Experimental Therapeutics · doi:10.1124/jpet.119.257220 · Cited by 37
“The evolution of materials science has been enormous in improving the performance and safety of medical devices (Teo et al., 2016), but in most cases the risks have been strongly”
BackgroundAsadullah, S., Wu, H. W., Mei, S., Wang, D., Pan, Y., Wang, D., Zhao, J., & Wei, J. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107433 · Cited by 33
Metadata
- Authors
- Teo, A. J. T., Mishra, A., Park, I., Kim, Y.-J., Park, W.-T., & Yoon, Y.-J.
- Affiliations
- Nanyang Technological University (SG)
- Korea Advanced Institute of Science and Technology (KR)
- Seoul National University of Science and Technology (KR)
- Corresponding author
- Park, Woo-Tae
- Yoon, Yong-Jin
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-03-04
- Volume
- 2
- Issue
- 4
- Pages
- 454-472
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W2335675049
- Cited by
- 778
- References
- 149
- Citations by year
- 2026: 46 · 2025: 90 · 2024: 107 · 2023: 85 · 2022: 84 · 2021: 93 · 2020: 81 · 2019: 75 · 2018: 65 · 2017: 44 · 2016: 8
- FWCI
- 26.15
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Biomaterials Science & Engineering (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Ministry of Education - Singapore (RG35/12, RGC4/13)
- Science and Engineering Research Council, Agency for Science, Technology and Research (SERC1121770039)
- National Research Foundation of Korea funded by the Ministry of Science, ICT & Future Planning (NRF-2013M2A2A9043274)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Synthesis and properties of polymers
- Keywords
- polymeric biomaterials, biomedical implants, biocompatible polymers, device packaging, polymer substrates, polyvinylidene fluoride, polyethylene, polypropylene, polydimethylsiloxane, parylene, polyamide, polytetrafluoroethylene, poly(methyl methacrylate), polyimide, polyurethane, liquid crystalline polymers, polymer nanocomposites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.