Polymeric Biomaterials for Medical Implants and Devices
The DOI matches its Crossref record; 147 of the 149 references it cites were found in a registry or an index.
Abstract
In this review article, we focus on the various types of materials used in biomedical implantable devices, including the polymeric materials used as substrates and for the packaging of such devices. Polymeric materials are used because of the ease of fabrication, flexibility, and their biocompatible nature as well as their wide range of mechanical, electrical, chemical, and thermal behaviors when combined with different materials as composites. Biocompatible and biostable polymers are extensively used to package implanted devices, with the main criteria that include gas permeability and water permeability of the packaging polymer to protect the electronic circuit of the device from moisture and ions inside the human body. Polymeric materials must also have considerable tensile strength and should be able to contain the device over the envisioned lifetime of the implant. For substrates, structural properties and, at times, electrical properties would be of greater concern. Section 1 gives an introduction of some medical devices and implants along with the material requirements and properties needed. Different synthetic polymeric materials such as polyvinylidene fluoride, polyethylene, polypropylene, polydimethylsiloxane, parylene, polyamide, polytetrafluoroethylene, poly(methyl methacrylate), polyimide, and polyurethane have been examined, and liquid crystalline polymers and nanocomposites have been evaluated as biomaterials that are suitable for biomedical packaging (section 2). A summary and glimpse of the future trend in this area has also been given (section 3). Materials and information used in this manuscript are adapted from papers published between 2010 and 2015 representing the most updated information available on each material.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Apart from the conductive functional materials, the insulative packaging materials are also a critical part of sensing recorders. Many popular insulating soft materials have been used for packaging sensing electrodes,[318] such as PI,[319,320] PDMS,[321,322] hydrogel,[323,324] etc., as they have suitable mechanical, dielectric and biological properties.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [318]
Citations
Cites
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Vepari, C., & Kaplan, D. L. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.013 · Cited by 2,561
The piezoelectricity of poly (vinylidene fluoride)
Kawai, H. (1969) · Japanese Journal of Applied Physics · doi:10.1143/jjap.8.975 · Cited by 2,044
Biomedical applications of polymer-composite materials: a review
Ramakrishna, S., Mayer, J., Wintermantel, E., & Leong, K. W. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00241-4 · Cited by 1,642
A review of stimuli-responsive shape memory polymer composites
Meng, H., & Li, G. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.023 · Cited by 1,190
Superconductivity in 4 Angstrom Single-Walled Carbon Nanotubes
Tang, Z. K., Zhang, L., Wang, N., Zhang, X. X., Wen, G. H., Li, G. D., Wang, J. N., Chan, C. T., & Sheng, P. (2001) · Science · doi:10.1126/science.1060470 · Cited by 816
Ambulatory esophageal pH monitoring using a wireless system
Pandolfino, J. (2003) · The American Journal of Gastroenterology · doi:10.1016/s0002-9270(03)00062-5 · Cited by 528
Hassler, C., Boretius, T., & Stieglitz, T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22169 · Cited by 501
Polyurethanes in Biomedical Applications
Burke, A., & Hasirci, N. (2004) · Advances in Experimental Medicine and Biology · doi:10.1007/978-0-306-48584-8_7 · Cited by 494
Development of Implantable Medical Devices: From an Engineering Perspective
Joung, Y.-H. (2013) · International Neurourology Journal · doi:10.5213/inj.2013.17.3.98 · Cited by 367
Research works printed but not linked: 14
- Kammula R. G., 2001, Med. Device Diagn. Ind., 23, 82
- Register O. o. t. F., 2010, Code of Federal Regulations, Title 21, Food and Drugs, Pt. 800–1299, Revised as of April 1, 2010
- Kim J., 2012, 5th European Conference of the International Federation for Medical and Biological Engineering, 1214
- Kuo A., 1999, Polymer Data Handbook
- 10.7537/j.issn.1545-1003 · doi:10.7537/j.issn.1545-1003
- Jeong J., 2012, Sens. Mater., 24, 189
- 10.1111/j.1572-0241.2003.07398.x · doi:10.1111/j.1572-0241.2003.07398.x · Paper page
- Chang J. H.-C., 2014, IEEE 27th International Conference onMicro Electro Mechanical Systems (MEMS), 1127
- Dutta S. R. B., 2013, Int. J. Rec. Sci. Res., 4, 1661
- Kirsten S., 2012, 35th International Spring Seminar on Electronics Technology (ISSE), 123
- de Beeck M. O., 2013, 2013 European Microelectronics Packaging Conference (EMPC), 1
- Imenes K., 2012, 4th Electronic System-Integration Technology Conference (ESTC), 1
- Kubyshkina G., 2011, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, 3, 11
- Sundaram V., 2011, Proceedings of the 61st IEEE Electronic Components and Technology Conference (ECTC), 1308
Cited by
Items 501–600 of 776
Polyimide-based polymers: a new frontier in antimicrobial materials and healthcare applications
Mehra, A., Chakraborty, M., & Nayak, S. (2026) · Materials & Design · doi:10.1016/j.matdes.2026.115453 · Cited by 6
Dutta, H., Veeman, D., & Vellaisamy, M. (2024) · Materials Letters · doi:10.1016/j.matlet.2024.137487 · Cited by 5
Qi, S., Yan, H., Tang, A., & Li, Y. (2025) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2025.109108 · Cited by 5
Alex, Y., Shanmugam, R., Salunkhe, S. S., & Čep, R. (2025) · REVIEWS ON ADVANCED MATERIALS SCIENCE · doi:10.1515/rams-2025-0109 · Cited by 15
“[109] reviewed advancements in implant polymeric materials, high-lighting manufacturing processes like extrusion and injection molding that improve device performance and life-span.”
The Use of Non-Degradable Polymer (Polyetheretherketone) in Personalized Orthopedics—Review Article
Wielgus, G., Kajzer, W., & Kajzer, A. (2025) · Polymers · doi:10.3390/polym17152158 · Cited by 6
“They are most often made of biomaterials: metal, ceramic or polymer, which are characterized by diverse chemical composition, structure, as well as physicochemical and mechanical properties [12–14].”
The influence of the nylon balloon stiffness on the efficiency of the intra‐aortic balloon occlusion
Gajewski, T., Szajek, K., Stȩpak, H., Łodygowski, T., & Oszkinis, G. (2018) · International Journal for Numerical Methods in Biomedical Engineering · doi:10.1002/cnm.3173 · Cited by 5
Xu, Q., Yang, Y., Hou, J., Chen, T.-Z., Fei, Y., Wang, Q., Zhou, Q., Li, W., Ren, J., & Li, Y. (2021) · BMC Biomedical Engineering · doi:10.1186/s42490-021-00051-x · Cited by 5
“The electrical driven actuator was assembled by sandwiching an ions-filled polymer electrolyte between two flexible CNTs-film electrodes and packed in nontoxic PDMS (Fig.”
MethodInfluentialDu, F., Erdmann, R., Petzold, A., Wutzler, A., Leuteritz, A., Nase, M., & Androsch, R. (2022) · Pharmaceutics · doi:10.3390/pharmaceutics14112381 · Cited by 5
“The advances in the development of polymer materials over the last century have yielded many biomedical applications [1,2], among others, serving as platforms for advanced medical devices/drug delivery systems, allowing the controlled release of active compounds [3,4].”
BackgroundThanigachalam, M., & Subramanian, A. V. M. (2021) · Polymer-Plastics Technology and Materials · doi:10.1080/25740881.2021.2005093 · Cited by 4
Alamry, K. A., Hussein, M. A., Khan, A., & Asiri, A. M. (2024) · RSC Advances · doi:10.1039/d4ra02893g · Cited by 5
Liu, L., & Webster, T. J. (2017) · Springer eBooks · doi:10.1007/978-3-319-73664-8_2 · Cited by 5
Photoreactive benzophenone as anchor of modifier to construct durable anti-platelets polymer surface
Yuan, L., Qu, B., Li, J., Lv, H., & Yang, X. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.11.042 · Cited by 5
Khan, R. U., Yu, H., Wang, L., Teng, L., Ul-Abdin, Z., Nazir, A., Fahad, S., Elshaarani, T., Haq, F., & Shen, D. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49424 · Cited by 5
Ferracini, R., Bistolfi, A., Guidotti, C., Artiaco, S., Agnese, B., Battiston, B., & Perale, G. (2020) · Materials · doi:10.3390/ma13184040 · Cited by 5
“, inflammation, angiogenesis, and bone regeneration) [29,30].”
A Facile Strategy for Preparation of Yttrium-90 Therapeutic Sources for Radionuclide Therapy
Mukherjee, A., Pandey, U., Shaikh, S. H., Kumar, M., Kaushik, V., Jagasia, P., Kumar, S. A., & Dhami, P. S. (2022) · Cancer Biotherapy and Radiopharmaceuticals · doi:10.1089/cbr.2021.0347 · Cited by 5
Diana, R., Gentile, F. S., Concilio, S., Petrella, A., Belvedere, R., Schibeci, M., Arciello, A., Costanzo, L. D., & Panunzi, B. (2023) · Polymers · doi:10.3390/polym15040883 · Cited by 5
“Biopolymers used as biomedical coatings must be biocompatible with their contact surface counterparts, which should benefit from their antimicrobial and antiproliferative properties [3,9,15,16].”
BackgroundInfluentialSurface Functionalization of Diamond-like Carbon Film with Biocompatible Polymer Brushes
Sasai, Y., Ousaka, D., Fujii, Y., Isono, A., Yamauchi, Y., Kondo, S., & Nakatiani, T. (2022) · Journal of Photopolymer Science and Technology · doi:10.2494/photopolymer.35.303 · Cited by 5
Cherian, D., Roy, A., Farinotti, A. B., Abrahamsson, T., Sjöström, T. A., Tybrandt, K., Nilsson, D., Magnus Berggren, A., Svensson, C. I., Poxson, D. J., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202300550 · Cited by 5
Storti, G., Jauhola-Straight, R., Hannigan, J. R., & Sidorenko, A. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c00256 · Cited by 5
Salih, A., & Goswami, T. (2024) · Bioengineering · doi:10.3390/bioengineering11020156 · Cited by 5
Mukherjee, S., Martı́nez-González, J. Á., Stallard, C. P., Dowling, D. P., & Gowen, A. (2017) · Journal of Spectral Imaging · doi:10.1255/jsi.2017.a3 · Cited by 5
Khan, R. U., Wang, L., Yu, H., Ul-Abdin, Z., Haq, F., Haroon, M., Naveed, K., Elshaarani, T., Fahad, S., Ren, S., et al. (2019) · International Journal of Polymeric Materials · doi:10.1080/00914037.2019.1581203 · Cited by 5
“Furthermore, polymeric biomaterials have excellent physical, chemical and biological properties for a wide range of biomedical applications such as orthopedic([3]), transplants([1]), sustained delivery of therapeutics , medicine , cell therapy([8]), bio-adhesion([9]), dental material([10]), surface functionalization ,…”
BackgroundFabrication and characterization of composite PMMA/HA scaffold using freeze casting method
Singh, G., & Santhanakrishnan, S. (2021) · Materials Technology · doi:10.1080/10667857.2021.1978640 · Cited by 5
Fabrication of Biomedical Electrodes Using Printing Approaches
Rajbhandari, G., Nattestad, A., Liu, X., Beirne, S., & Wallace, G. G. (2024) · Biomedical Materials & Devices · doi:10.1007/s44174-024-00176-2 · Cited by 4
“…which are simultaneously biocompatible in composition, defect free, long-life, highly insulating, have low thermal conductivity and mass, high transparency (in the case of an optically responsive electrode), have low mass density, are highly flexible and can resist bio-dissolution can be used [75].”
Burke, D. W., Yamashita, M., Wang, Z., Kuzumoto, M., Urayama, K., Saito, K., & Furukawa, S. (2025) · Chemical Science · doi:10.1039/d5sc00535c · Cited by 4
Application of MCA – AlPi Nitrogen–Phosphorus Synergistic Flame Retardant in Nylon 11
Li, X., He, Y., Tang, D., Liu, Y., & Wang, Q. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57158 · Cited by 4
Afshari, E., Houri, S., Verplancke, R., Rochus, V., Cauwe, M., Gijsenbergh, P., & de Beeck, M. O. (2025) · Sensors · doi:10.3390/s25134074 · Cited by 4
“In contrast, biocompatible polymers such as polyimide, Parylene, and polydimethylsiloxane (PDMS) are potential candidates for encapsulation of biomedical implantable devices since these polymers exhibit properties such as flexibility, biocompatibility, and hermeticity [29].”
Gholami, R., Motlagh, N. V., Yousefi, Z., Gholami, F., Richardson, J. J., Akhavan, B., Adibnia, V., & Truong, V. K. (2025) · Coatings · doi:10.3390/coatings15121471 · Cited by 5
Antibacterial properties of bimetallic nanopattern induced by excimer laser on PTFE nanotextile
Slepička, P., Vašinová, T., Frýdlová, B., Kutová, A., Havlíčková, Š., Švorčı́k, V., & Kasálková, N. S. (2025) · Heliyon · doi:10.1016/j.heliyon.2025.e42775 · Cited by 4
“Coated catheters are used to drain urine after excretory tract operations, and there are also microporous PTFE balloons that deliver drugs to targeted tissues in the body [18].”
Strategy to Develop Multifunctional Hydrogel Coatings with High Durability
Wang, S., Wang, S., Si, M., Zheng, S. Y., & Yang, J. (2025) · Langmuir · doi:10.1021/acs.langmuir.5c00773 · Cited by 4
Machine learning for additive manufacturing of implants: a review of metal and ceramic applications
Antonini, L., Giardini, C., Quarto, M., Herranz-Diez, C., & Buj-Corral, I. (2026) · Materials & Design · doi:10.1016/j.matdes.2026.116333 · Cited by 4
An Umbo Microphone for Fully-Implantable Assistive Hearing Devices
Cary, B. G., Zhang, J. Z., McHugh, C. I., Kymissis, I., Olson, E. S., Nakajima, H. H., & Lang, J. H. (2022) · IEEE Sensors Journal · doi:10.1109/jsen.2022.3209966 · Cited by 4
“PVDF is a piezoelectric material that transduces umbo motion to an electrical response; it has been FDA approved for other implantable devices [11].”
BackgroundBiyomalzeme Türleri ve Biyouyumlu Metalik Elementler
Balci, E., & Dağdelen, F. (2022) · Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi · doi:10.35193/bseufbd.1165914 · Cited by 4
Recent Updates on Metal-Polymer Nanocomposites in 3D Bioprinting for Tissue Engineering Applications
Flora, B., Kumar, R., Mahdieh, R., Zarei, K., Chehrazi, S., Kaur, S. D., Sharma, A., Mohapatra, P., Sakshi, A., Singh, A., et al. (2023) · Nanofabrication · doi:10.37819/nanofab.008.291 · Cited by 4
pH-Activated Dissolvable Polymeric Coatings to Reduce Biofouling on Electrochemical Sensors
Uçar, A., González‐Fernández, E., Staderini, M., Murray, A. F., Mount, A. R., & Bradley, M. (2023) · Journal of Functional Biomaterials · doi:10.3390/jfb14060329 · Cited by 4
“Polymers have been widely used in medical devices and implants due to their readily controllable chemical, electrical and thermal properties [11] and due to their biocompatibility,”
BackgroundAdvancement in Biomaterials in the Form of Implants
Shivgotra, R., Soni, B., Kaur, M., & Thakur, S. (2023) · Engineering materials · doi:10.1007/978-981-99-6698-1_10 · Cited by 4
Strengthen oriented poly (L-lactic acid) monofilaments via mechanical training
Zhang, Y., Dong, X., Zhang, C., Wu, X., Cheng, J., Wu, G., Sun, R., Ni, Z., & Zhao, G. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.129975 · Cited by 4
Sharma, A., Arora, V., & Mulaveesala, R. (2024) · Journal of Optics · doi:10.1088/2040-8986/ad657a · Cited by 4
“These approaches have demonstrated some effectiveness in detecting certain types of inclusions, although they frequently have limits regarding resolution, sensitivity and practicality [1–11].”
Abarkan, A., Achalhi, N., Yousfi, R. E., Moumnassi, S., Aissaoui, Z., Asehraou, A., & Idrissi, A. E. (2024) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2024.123014 · Cited by 4
Mechanical property variation of AgNW/PDMS nanocomposites for fully elastomeric electrodes
Jeong, S., Heo, S., & Kim, H. (2021) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-020-05210-9 · Cited by 5
Gadomska‐Gajadhur, A., Kruk, A., Wierzchowski, K., Ruśkowski, P., & Pilarek, M. (2021) · Polymers for Advanced Technologies · doi:10.1002/pat.5315 · Cited by 4
Preliminary Study on the Simulation of a Radiation Damage Analysis of Biodegradable Polymers
Shim, H.-E., Yeon, Y. H., Lim, D., Nam, Y. R., Park, J.-H., Lee, N., & Gwon, H. (2021) · Materials · doi:10.3390/ma14226777 · Cited by 4
Mehta, S., Saini, A., Singh, H., Singh, G., & Buddhi, D. (2022) · Materials Today Proceedings · doi:10.1016/j.matpr.2022.08.547 · Cited by 4
Lawson, K. E., Dekle, J. K., & Adamczyk, A. J. (2022) · Computational and Theoretical Chemistry · doi:10.1016/j.comptc.2022.113938 · Cited by 4
Numerical Methodology to Evaluate Trackability and Pushability of PTCA Balloon Catheter
Sirivella, M. L., Rahinj, G. B., Chauhan, H. S., Satyanarayana, M. V., & Ramanan, L. (2023) · Cardiovascular Engineering and Technology · doi:10.1007/s13239-022-00653-z · Cited by 4
Guo, J., Park, E. J., Teo, Y. C., Abbas, A., Goh, D. L. M., Smith, R. A. A., Nie, Y., Nguyen, H. T. L., Yeong, J. P.-S., Cool, S. M., et al. (2023) · Polymer Chemistry · doi:10.1039/d2py01545e · Cited by 4
Zhao, S., Zhou, C., Zan, R., Shu, M., Suo, T., & Xin, Z. (2024) · Journal of Polymer Research · doi:10.1007/s10965-024-04107-z · Cited by 4
Visualization of morphological features of chitosan microtubes during biodegradation
Babicheva, T. S., Gegel, N. O., & Shipovskaya, A. B. (2017) · Journal of Physics Conference Series · doi:10.1088/1742-6596/917/4/042026 · Cited by 4
Cytotoxicity of Catalysed Silicone Resin Coatings for Smart Biomedical Devices
Werner, V. M. K., Kist, A., & Eblenkamp, M. (2019) · Current Directions in Biomedical Engineering · doi:10.1515/cdbme-2019-0042 · Cited by 4
“In addition to protection against environmental influences [8], the task of these encapsulation materials is the electrical insulation of the integrated electronics [9].”
BackgroundSiegel, J., Savenkova, T., Pryjmaková, J., Slepička, P., Šlouf, M., & Švorčı́k, V. (2021) · Materials · doi:10.3390/ma14123263 · Cited by 4
“These biomaterials are particularly used in tissue engineering [1], implants [4], drug-delivery carriers [5], wound healing materials or in biological imaging [6].”
BackgroundDas, N. M., Kumar, S., & Bandyopadhyay, D. (2017) · Carbon · doi:10.1016/j.carbon.2017.06.029 · Cited by 4
Liu, L. (2017) · Digital Repository Service (Northeastern University) · doi:10.17760/d20250935 · Cited by 4
González-Henríquez, C. M., Sarabia‐Vallejos, M. A., Sanz-Horta, R., & Rodríguez‐Hernández, J. (2022) · Wiley eBooks · doi:10.1002/9783527815562.mme0040 · Cited by 4
In Vivo Stability of Electronic Intraocular Lens Implant for Corneal Blindness
Vieira, I. V., Fan, V. H., Wiemer, M. W., Lemoff, B. E., Sood, K. S., Mussa, M. J., & Yu, C. Q. (2025) · Translational Vision Science & Technology · doi:10.1167/tvst.14.6.33 · Cited by 3
Fiedler, N., Kleine, T., Oschatz, S., Schultz, S., Grabow, N., & Lebahn, K. (2025) · Polymers · doi:10.3390/polym17212863 · Cited by 4
Polymeric Materials in Biomedical Engineering: A Bibliometric Mapping
Veres, C., Tănase, M., & Szabo, D. A. (2025) · Polymers · doi:10.3390/polym17212886 · Cited by 7
Oxidation‐Degradable Resins for 3D‐Printing of Cell‐Responsive Biomaterials
Santos, R. D., Wynn, W., Marquez, L., Hoque, E., Bruce, K., Yavitt, B. M., Harris, G. M., & Martin, J. R. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202522208 · Cited by 3
Polymer-Based Composite in Biomedical Applications
Mydin, R. B. S. M. N., Faudzi, K. N. I. K. M., Harun, N. H., Effendy, W. N. F. W. E., Romli, N. A. A., & Gazzali, A. M. (2020) · Springer eBooks · doi:10.1007/978-3-030-45489-0_15 · Cited by 3
An in-depth investigation of the C2 polymer as a next-generation transdermal drug delivery platform
Um, H., Kang, R. H., Kim, J., Seo, E. W., Ahn, J., Lee, J., & Kim, D. (2023) · Polymer · doi:10.1016/j.polymer.2023.126271 · Cited by 3
Wei, X., Wang, Z., Zhang, P., Pang, M., Liu, K., & Su, J. (2024) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-024-10384-y · Cited by 3
“With the rapid development of the medical industry, the requirements for human implants are constantly increasing (Ref 4).”
Lim, K. C., Mahamud, S. N. S., & Badrolhisham, M. A. Z. (2024) · International Journal of Nanoelectronics and Materials (IJNeaM) · doi:10.58915/ijneam.v17idecember.1609 · Cited by 3
“Additionally, biopolymer materials must be able to contain the device during the anticipated implant lifetime and have a high tensile strength [3].”
Characterization of Laser-Textured Surfaces of Parts of a Biodegradable Polymer
Rusu, P.-D., Bialas, O., Woźniak, A., Adamiak, M., Appiah, A. N. S., Tâmpu, N. C., Mazurchevici, S., Kyratsis, P., Tzotzis, A., Nedelcu, A., et al. (2025) · Coatings · doi:10.3390/coatings15020246 · Cited by 5
“Although numerous polymeric biomaterials have been investigated for tissue engineering applications [27–29], only a limited number are currently used in clinical practice.”
Medical Implants: An Overview, Innovation and Future Prospects
Rani, M., & Sharma, V. (2025) · Asian Journal of Pharmacy and Technology · doi:10.52711/2231-5713.2025.00025 · Cited by 4
New Encapsulation Concepts for Medical Ultrasound Probes-A Heat Transfer Simulation Study
Do, N. B. D., Andreassen, E., Edwardsen, S., Lifjeld, A., Nguyen, H., Aasmundtveit, K. E., & Imenes, K. (2019) · European Microelectronics and Packaging Conference · doi:10.23919/empc44848.2019.8951832 · Cited by 3
Synthesis and properties of epoxy resin-based polymeric composite materials
Ivanov, Y. N., Minaev, N. V., Bayandin, V. V., & Савельевна, Ш. Н. (2021) · IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA · doi:10.6060/ivkkt.20216407.6379 · Cited by 3
Sharma, A., Dua, G., Arora, V., Kumar, N., & Mulaveesala, R. (2022) · Lecture notes in mechanical engineering · doi:10.1007/978-981-16-9093-8_22 · Cited by 3
Zhuang, X., Zhang, S., & Ma, W. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.53140 · Cited by 3
Prymushko, S. O., Galatenko, N. А., Rozhnova, R. A., Kozlova, G. A., & Gladyr, I. I. (2022) · Polymer journal · doi:10.15407/polymerj.44.03.231 · Cited by 3
Review of recent developments in polymer matrix composites with fiber reinforcements
Elsheikhi, S. A., & Benyounis, K. Y. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-96020-5.00031-5 · Cited by 3
Corrosion resistance of gold and gold oxide nanomaterials
Ellioun, K., Yazdian, F. A., & Nouri, P. M. M. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-95158-6.00010-2 · Cited by 3
Nanobiomaterials: Classifications and Properties
Türk, S., Fındık, F., & Özacar, M. (2023) · Springer eBooks · doi:10.1007/978-981-19-9437-1_2 · Cited by 3
Ko, J., Seo, H.-B., Lee, J. H., Kim, S. Y., & Lee, S.-Y. (2023) · Colloids and Interface Science Communications · doi:10.1016/j.colcom.2023.100756 · Cited by 3
Hashamdar, S., Parvin, P., Mayahi, S., Rahimi, B., Refahizadeh, M., & Ramezani, F. (2023) · International Journal of Polymeric Materials · doi:10.1080/00914037.2023.2282994 · Cited by 4
“Researchers have also used micrographic methods to successfully differentiate neuronal stem cells into neurons, astrocytes, and oligodendrocytes [18] .”
Harun, N. H., Mydin, R. B. S. M. N., Sreekantan, S., Ngaini, N. S., Saharudin, K. A., & Basiron, N. (2024) · Journal of Taibah University for Science · doi:10.1080/16583655.2023.2288301 · Cited by 4
Introduction to polymer materials for implants
Rane, A. V., Abitha, V. K., Sisanth, K. S., & Kanny, K. M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-99690-7.00009-1 · Cited by 5
Polyurethane Detachable Lamination Adhesives Containing Alkaline Degradable Aromatic Chain Extender
Wang, J., Yan, Q., Guo, Y., Bai, L., Kalantar, T. H., Song, A., Zhang, W., & Yu, Y. (2024) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.3c04626 · Cited by 3
Circularity of Polymers Used in Hospitals: Current Status, Challenges, and Future Solutions
Zechel, M., Zechel, S., Schubert, U. S., & Ruckdäschel, H. (2024) · Advanced Sustainable Systems · doi:10.1002/adsu.202400050 · Cited by 7
Kausar, A. (2024) · Journal of Macromolecular Science Part A · doi:10.1080/10601325.2024.2394812 · Cited by 3
“[111–113] Nano-additive inclusion has led to considerable enhancements in the characters.”
Umarov, A. Z., Collins, J., Nikitina, E. A., Moutsios, I., Rosenthal, M., Dobrynin, A. V., Sheiko, S. S., & Ivanov, D. A. (2024) · Macromolecular Rapid Communications · doi:10.1002/marc.202400569 · Cited by 4
Potassium tantalum niobate: Structural insights and biocompatibility for biomedical applications
Ganesh, M., Pandey, S., Manickasamy, M. K., Kunnumakkara, A. B., & Dobbidi, P. (2024) · Journal of the American Ceramic Society · doi:10.1111/jace.20261 · Cited by 3
Marcoleta, J. P., Nogueira, W., Froriep, U. P., & Doll, T. (2018) · physica status solidi (a) · doi:10.1002/pssa.201700134 · Cited by 3
Khor, C. Y., Nawi, M. A. M., Ishak, M. I., Zainal, S., Rosli, M. U., & Termizi, S. N. A. A. (2021) · Lecture notes in mechanical engineering · doi:10.1007/978-981-16-0866-7_75 · Cited by 3
Douhou, A., & Ramtani, S. (2021) · International Journal of Engineering Science · doi:10.1016/j.ijengsci.2021.103575 · Cited by 3
Biomaterials for medical products
Gayathry, G., Komath, M., & Velayudhan, S. (2022) · Elsevier eBooks · doi:10.1016/b978-0-12-823966-7.00012-8 · Cited by 3
Antibacterial Surface Modification to Prevent Biofilm Formation on Polymeric Biomaterials
Mallik, A. K., Chisty, A. H., Khan, M. N., Kabir, S. F., Shahruzzaman, M., & Rahman, M. M. (2022) · Springer eBooks · doi:10.1007/978-981-16-3667-7_15 · Cited by 3
Seok, S., Park, H., Kim, Y.-J., & Kim, J. (2022) · Micromachines · doi:10.3390/mi13081295 · Cited by 3
Self-citationKumar, V., Mistri, A., & Mohata, A. (2024) · Wiley eBooks · doi:10.1002/9781394175109.ch1 · Cited by 3
Printable and Tunable Bioresin with Strategically Decorated Molecular Structures
Rufo‐Martín, C., Infante‐García, D., Díaz‐Álvarez, J., Miguélez, H., & Youssef, G. (2024) · Advanced Materials · doi:10.1002/adma.202412338 · Cited by 2
Smart orthopedic implants: the future of personalized joint replacement and monitoring
Eskandar, K. (2025) · Genij Ortopedii · doi:10.18019/1028-4427-2025-31-3-388-398 · Cited by 5
3D-printed microfluidic dialysis apparatus for efficient polymer purification
Koswig, T., Geitner, R., Anufriev, I., Nischang, I., Zechel, S., Schubert, U. S., & Junkers, T. (2025) · Polymer Chemistry · doi:10.1039/d5py00608b · Cited by 2
Wettability, Tribology, Degradation, and Topography of Laser-Textured Surfaces of Biopolymers
Ciofu, C. D., Rusu, P.-D., Adamiak, M., Bialas, O., Tâmpu, N. C., Kyratsis, P., Tzotzis, A., Mazurchevici, S., Nedelcu, A., Jiang, Z., et al. (2025) · Micromachines · doi:10.3390/mi16091009 · Cited by 2
“Only a small number of polymeric biomaterials are currently being utilized in clinical practice, and many have been investigated for tissue engineering [16–18].”
Moreno, M., Devis, S., Velásquez, L., Arredondo, M., Mariotti, D., McGlynn, R. J., Sanchez‐Ruderisch, H., Quijada, R., Gonzalez, G. A., Olguín, Y., et al. (2025) · Journal of Materials Science · doi:10.1007/s10853-025-11168-y · Cited by 5
“In contrast, PA6 for packaging [104] is often produced by film extrusion or blow moulding, may include additives such as plasticizers or stabilizers, and targets cost-efficiency and barrier performance rather than in vivo stability.”
Hou, S.-W., Chang, J.-J., Lin, L.-Y., Pham, U. K., Do, T. T. H., Lee, C.-K., & Hsiao, W. W.-W. (2025) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2025.109915 · Cited by 2
Beyond Reinforcement: Collagen–Inorganic Composites as a Roadmap for Next-Generation Biomaterials
Assis, M., Grasser, G. A., Bonifácio, M., Sousa, K. D. S. J., de Souza, A. W. S., Braga, A. R. C., & Rennó, A. C. M. (2026) · ACS Materials Au · doi:10.1021/acsmaterialsau.5c00192 · Cited by 2
Extrusion-based additive manufacturing of zinc bone scaffolds
Chen, K., Dong, J., Putra, N. E., Li, J., Klimopoulou, M., Leeflang, M. A., Fratila-Apachitei, L. E., Zhou, J., & ZADPOOR, A. A. (2026) · Acta Biomaterialia · doi:10.1016/j.actbio.2026.01.039 · Cited by 4
Li, C., Cauwe, M., Mader, L., Schaubroeck, D., & de Beeck, M. O. (2019) · Coatings · doi:10.3390/coatings10010019 · Cited by 26
Rezvova, M. A., Glushkova, T. V., Makarevich, M. I., Nikishau, P. A., Kostjuk, S. V., Klyshnikov, K. Y., & Ovcharenko, E. A. (2020) · Russian Journal of Applied Chemistry · doi:10.1134/s1070427220090141 · Cited by 2
Formation Mechanism Analysis of Shear‐Induced Microgel Filaments during Microfluidic Gelation
Fukushima, S., Takayama, Y., Nasuno, E., Yanagida, Y., & Kato, N. (2020) · Macromolecular Materials and Engineering · doi:10.1002/mame.202000586 · Cited by 2
Vona, M. L. D., Rossolini, G. M., & Sette, M. (2021) · Frontiers in Molecular Biosciences · doi:10.3389/fmolb.2021.658687 · Cited by 2
“Biocompatible polyimides, polyamide, and polyurethanes meet many requirements together with their co-polymers such as polyamides and polyurethanes functionalized with phosphocoline (Teo et al., 2016; Alibeik and Sask, 2019).”
BackgroundCheca, G. G., Panuccio, G., Linares-Barranco, B., & Serrano‐Gotarredona, T. (2021) · IEEE International Conference on Omni-layer Intelligent Systems (COINS) · doi:10.1109/coins51742.2021.9524089 · Cited by 2
Metadata
- Authors
- Teo, A. J. T., Mishra, A., Park, I., Kim, Y.-J., Park, W.-T., & Yoon, Y.-J.
- Affiliations
- Nanyang Technological University (SG)
- Korea Advanced Institute of Science and Technology (KR)
- Seoul National University of Science and Technology (KR)
- Corresponding author
- Park, Woo-Tae
- Yoon, Yong-Jin
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-03-04
- Volume
- 2
- Issue
- 4
- Pages
- 454-472
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W2335675049
- Cited by
- 778
- References
- 149
- Citations by year
- 2026: 46 · 2025: 90 · 2024: 107 · 2023: 85 · 2022: 84 · 2021: 93 · 2020: 81 · 2019: 75 · 2018: 65 · 2017: 44 · 2016: 8
- FWCI
- 26.15
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Biomaterials Science & Engineering (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Ministry of Education - Singapore (RG35/12, RGC4/13)
- Science and Engineering Research Council, Agency for Science, Technology and Research (SERC1121770039)
- National Research Foundation of Korea funded by the Ministry of Science, ICT & Future Planning (NRF-2013M2A2A9043274)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Synthesis and properties of polymers
- Keywords
- polymeric biomaterials, biomedical implants, biocompatible polymers, device packaging, polymer substrates, polyvinylidene fluoride, polyethylene, polypropylene, polydimethylsiloxane, parylene, polyamide, polytetrafluoroethylene, poly(methyl methacrylate), polyimide, polyurethane, liquid crystalline polymers, polymer nanocomposites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.