Polymeric Biomaterials for Medical Implants and Devices
The DOI matches its Crossref record; 147 of the 149 references it cites were found in a registry or an index.
Abstract
In this review article, we focus on the various types of materials used in biomedical implantable devices, including the polymeric materials used as substrates and for the packaging of such devices. Polymeric materials are used because of the ease of fabrication, flexibility, and their biocompatible nature as well as their wide range of mechanical, electrical, chemical, and thermal behaviors when combined with different materials as composites. Biocompatible and biostable polymers are extensively used to package implanted devices, with the main criteria that include gas permeability and water permeability of the packaging polymer to protect the electronic circuit of the device from moisture and ions inside the human body. Polymeric materials must also have considerable tensile strength and should be able to contain the device over the envisioned lifetime of the implant. For substrates, structural properties and, at times, electrical properties would be of greater concern. Section 1 gives an introduction of some medical devices and implants along with the material requirements and properties needed. Different synthetic polymeric materials such as polyvinylidene fluoride, polyethylene, polypropylene, polydimethylsiloxane, parylene, polyamide, polytetrafluoroethylene, poly(methyl methacrylate), polyimide, and polyurethane have been examined, and liquid crystalline polymers and nanocomposites have been evaluated as biomaterials that are suitable for biomedical packaging (section 2). A summary and glimpse of the future trend in this area has also been given (section 3). Materials and information used in this manuscript are adapted from papers published between 2010 and 2015 representing the most updated information available on each material.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Apart from the conductive functional materials, the insulative packaging materials are also a critical part of sensing recorders. Many popular insulating soft materials have been used for packaging sensing electrodes,[318] such as PI,[319,320] PDMS,[321,322] hydrogel,[323,324] etc., as they have suitable mechanical, dielectric and biological properties.”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [318]
Citations
Cites
On the mechanisms of biocompatibility
Williams, D. F. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2008.04.023 · Cited by 2,772
Vepari, C., & Kaplan, D. L. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.013 · Cited by 2,561
The piezoelectricity of poly (vinylidene fluoride)
Kawai, H. (1969) · Japanese Journal of Applied Physics · doi:10.1143/jjap.8.975 · Cited by 2,044
Biomedical applications of polymer-composite materials: a review
Ramakrishna, S., Mayer, J., Wintermantel, E., & Leong, K. W. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(00)00241-4 · Cited by 1,642
A review of stimuli-responsive shape memory polymer composites
Meng, H., & Li, G. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.023 · Cited by 1,190
Superconductivity in 4 Angstrom Single-Walled Carbon Nanotubes
Tang, Z. K., Zhang, L., Wang, N., Zhang, X. X., Wen, G. H., Li, G. D., Wang, J. N., Chan, C. T., & Sheng, P. (2001) · Science · doi:10.1126/science.1060470 · Cited by 816
Ambulatory esophageal pH monitoring using a wireless system
Pandolfino, J. (2003) · The American Journal of Gastroenterology · doi:10.1016/s0002-9270(03)00062-5 · Cited by 528
Hassler, C., Boretius, T., & Stieglitz, T. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22169 · Cited by 501
Polyurethanes in Biomedical Applications
Burke, A., & Hasirci, N. (2004) · Advances in Experimental Medicine and Biology · doi:10.1007/978-0-306-48584-8_7 · Cited by 494
Development of Implantable Medical Devices: From an Engineering Perspective
Joung, Y.-H. (2013) · International Neurourology Journal · doi:10.5213/inj.2013.17.3.98 · Cited by 367
Research works printed but not linked: 14
- Kammula R. G., 2001, Med. Device Diagn. Ind., 23, 82
- Register O. o. t. F., 2010, Code of Federal Regulations, Title 21, Food and Drugs, Pt. 800–1299, Revised as of April 1, 2010
- Kim J., 2012, 5th European Conference of the International Federation for Medical and Biological Engineering, 1214
- Kuo A., 1999, Polymer Data Handbook
- 10.7537/j.issn.1545-1003 · doi:10.7537/j.issn.1545-1003
- Jeong J., 2012, Sens. Mater., 24, 189
- 10.1111/j.1572-0241.2003.07398.x · doi:10.1111/j.1572-0241.2003.07398.x · Paper page
- Chang J. H.-C., 2014, IEEE 27th International Conference onMicro Electro Mechanical Systems (MEMS), 1127
- Dutta S. R. B., 2013, Int. J. Rec. Sci. Res., 4, 1661
- Kirsten S., 2012, 35th International Spring Seminar on Electronics Technology (ISSE), 123
- de Beeck M. O., 2013, 2013 European Microelectronics Packaging Conference (EMPC), 1
- Imenes K., 2012, 4th Electronic System-Integration Technology Conference (ESTC), 1
- Kubyshkina G., 2011, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, 3, 11
- Sundaram V., 2011, Proceedings of the 61st IEEE Electronic Components and Technology Conference (ECTC), 1308
Cited by
Items 701–776 of 776
Emerging Advanced Materials, Properties for Biomedical Applications
Klenam, D. E. P., McBagonluri, F., Asumadu, T. K., Osei, E., & Osafo, S. A. (2023) · Advances in Multidisciplinary & Scientific Research Journal Publication · doi:10.22624/aims/accrabespoke2023p22
Shaarani, F. W. (2021) · UPCommons institutional repository (Universitat Politècnica de Catalunya) · doi:10.5821/dissertation-2117-349572
Polymers for implantable bioartificial pancreas
Chen, J. T., Lee, J. M., Lim, E. X. H., Koh, Y., Yeong, W. Y., & Teo, A. K. K. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-99690-7.00012-1 · Cited by 2
Self-citationAdditive manufacturing of polymeric implants
Azadi, M. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-99690-7.00018-2
Polyurethane in shape memory nanomaterials
Kausar, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-18504-5.00013-0
Do, N. B. D., Imenes, K., Aasmundtveit, K. E., Nguyen, H., & Andreassen, E. (2023) · European Microelectronics and Packaging Conference · doi:10.23919/empc55870.2023.10418324
“* Values from references [45], [46].”
Rezvova, M. A., Nikishau, P. A., Kostjuk, S. V., Makarevich, M. I., Сергеевич, О. П., Klyshnikov, K. Y., Glushkova, T. V., Kostyunin, A. E., & Ovcharenko, E. A. (2023) · Complex Issues of Cardiovascular Diseases · doi:10.17802/2306-1278-2023-12-4s-90-101
Investigations into the macrocyclization of poly(2-oxazoline)s and poly(2-oxazine)s
Huettner, N. (2024) · Queensland University of Technology · doi:10.5204/thesis.eprints.248931 · Cited by 1
Performance of thermosetting polymers containing nanodiamond nanofiller
Kausar, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15908-4.00008-1
Biomedical Materials and Artificial Organs
Suhag, D. (2024) · Biomedical materials for multi-functional applications · doi:10.1007/978-981-97-5906-4_2 · Cited by 1
Tasneem, M. H. B., Al-Jahwari, F., Al-Kindi, M., Al-Lawati, I., & Lawati, A. A. (2024) · Biomedical Physics & Engineering Express · doi:10.1088/2057-1976/ad7591
Aundhia, C. J., Talele, C., & Talele, D. R. (2024) · Royal Society of Chemistry eBooks · doi:10.1039/9781837675555-00424
In Vivo Study of Organ and Tissue Stability According to the Types of Bioresorbable Bone Screws
Kwon, T.-Y., Lee, G., Lee, H. S., & Lee, K.-B. (2024) · Materials · doi:10.3390/ma17225632
“Nevertheless, this study aims to contribute to a future increase in the adoption of biodegradable implants.”
Recent advancements in sustainable materials for biomedical applications
Atal, D. K., Kumar, D., Tiwari, V., & Chaubey, N. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-13849-2.00026-0
Lin, Y.-T., Liao, S.-H., Tsai, Y.-Y., Chao, Y.-C., Zhu, J., Huang, J.-R., Wang, C., & Juang, J. (2024) · Journal of Mechanics · doi:10.1093/jom/ufae046
Green Polymeric Materials for Medical Implantable and Non-implantable Devices
Tripathi, J. P. (2024) · Encyclopedia of Green Materials · doi:10.1007/978-981-97-4618-7_98
Tao, M., Lo, J. C. C., Tsui, C.-Y., & Lee, S. W. R. (2025) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2025.3531795
“The substrate is usually made of liquid crystal polymer (LCP), polyimide, silicone, or Parylene-C film [25], [26].”
Saskianti, T., Angelina, M., Dewi, A. M., Antonius, Y., Zahri, A. N., Ridwаn, R. D., Kanawa, M., Kawamoto, T., Tanimoto, K., & Fujimoto, K. (2025) · European Journal of Dentistry · doi:10.1055/s-0044-1801280
Biomaterials in Medicine: A Review
Prabahwalkar, S., Pandey, S., Mubarak, E., Das, S., & Ojha, N. (2025) · Advances in computational intelligence and robotics book series · doi:10.4018/979-8-3693-7974-5.ch024
Biodegradable Materials and Pioneering Sustainable Solutions in Dental Care and Engineering
Jacob, J., Unnimaya, M., Ramlath, B. L., & Varghese, T. (2025) · IGI Global eBooks · doi:10.4018/979-8-3373-1305-4.ch005 · Cited by 1
NIR Phosphorescent Oxygen Sensors in Natural Hydrogel MatricesPreprint
Saleem, W., Jeevarathinam, A. S., Lindblade, R. E., & McShane, M. J. (2025) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/2025.05.17.654688 · Cited by 1
“These include but are not limited to ensuring biocompatibility of polymeric constituents [74], [75] , sterilization impact and compatibility [76] , design features facilitating needle-based delivery [77], [78], [79], [80], [81] , and compatibility between material-tissue interface and mechanical…”
Emerging Biomaterials for Retinal Implants
Italiano, M. L., Guo, T., Tsai, D., Lovell, N. H., & Shivdasani, M. N. (2025) · Royal Society of Chemistry eBooks · doi:10.1039/9781839169779-00097
Raut, A., Uddanwadikar, R., Padole, P. M., Ookalkar, D., & Kanekar, J. (2025) · Materials Research Express · doi:10.1088/2053-1591/ade5f0 · Cited by 1
Heidari, B., Mozanzadeh, M. T., Valipour, A., Hadavi, M., Nazemroaya, S., & Houshmand, H. (2025) · Animal Reproduction Science · doi:10.1016/j.anireprosci.2025.107965 · Cited by 2
Singh, L. (2025) · Journal of Stem Cell Research & Therapeutics · doi:10.15406/jsrt.2025.10.00191
Zhang, T., Wang, J., Gai, K., Jan, S. S., Li, Y., Chen, J., & Nie, M. (2025) · Polymer · doi:10.1016/j.polymer.2025.129032
Pathak, D. K., & Lamba, A. (2025) · Biomedical materials for multi-functional applications · doi:10.1007/978-981-95-2401-3_7 · Cited by 1
Osteogenic Marker Expression after SHED and PMMA–HA Scaffold Application in Alveolar Bone Defects
Saskianti, T., Damayanti, R., Pangestika, F. W., Dewi, A. M., Ridwаn, R. D., Fan, C. Y., Kanawa, M., Kawamoto, T., Tanimoto, K., & Fujimoto, K. (2025) · European Journal of Dentistry · doi:10.1055/s-0045-1812311
“8 11 However, PMMA has some disadvantages, including poor osteointegration and limited bone attachment, which need to be enhanced biologically.”
Biomaterials in the fabrication of artificial tissues
haq, F. U., & Roopavath, U. K. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-32828-2.00007-7
The critical role of artificial intelligence in biomaterials design and development
Zarrintaj, P., Yazdi, M. K., Bencherif, S. A., Saeb, M. R., & Mozafari, M. (2025) · Elsevier eBooks · doi:10.1016/b978-0-323-95464-8.00015-3
Material Characterization of Spring Steel for Prosthetic Applications
Lenggana, B. W., Ubaidillah, U., Susilo, D. D., & Khan, S. Z. (2025) · E3S Web of Conferences · doi:10.1051/e3sconf/202567406010
Application of polyimides in implants
Yang, X., Ma, W., Liu, H., Tang, W., Shu, J., Zheng, H., Zhou, Z., Chen, Y., & Liang, H. (2025) · Elsevier eBooks · doi:10.1016/b978-0-443-29911-7.00005-9
Xu, Q., Yang, Y., Hou, J., Chen, T., Fei, Y., Wang, Q., Zhou, Q., Li, W., Ren, J., & Li, Y.-G. (2021) · Figshare · doi:10.6084/m9.figshare.14329528
Toxicology Assessment of Polymeric Material for Implants
Paul, A. K., Chakraborty, G., & Prasad, A. (2025) · Materials horizons · doi:10.1007/978-981-96-9306-1_14
Biomedical Plasma Electrolytic Oxidation Composite Coatings via Particles Addition
Wang, X., Mei, D., Zhu, S., Wang, L., & Guan, S. (2025) · Springer eBooks · doi:10.1007/978-3-031-92429-3_11
Biomedical Applications of Polymers
Kishida, A. (2025) · Springer handbooks · doi:10.1007/978-981-96-2498-0_4
Lho, H.-W. (2025) · Springer eBooks · doi:10.1007/978-981-95-3971-0_28
Qin, M., Li, Y., Pang, Z., & Huang, J. (2026) · Brazilian Journal of Physics · doi:10.1007/s13538-025-02000-8
“In the intersection of modern electrical engineering and bio-medical engineering, high-performance insulation materials serve as a critical foundation for ensuring the safe and reliable operation of medical devices [1], particularly high-precision diagnostic and therapeutic equipment [ 2].”
A High-Accuracy Solid/Liquid Composite Packaging Method for Implantable Pressure Sensors
Wang, B., Zhang, Y., Huang, Y., Li, Z., Jiang, S., Wang, F., Liu, Q., & Yang, X. (2026) · Micromachines · doi:10.3390/mi17020162
“Utilizing the chemical vapor deposition (CVD) process, Parylene-C forms a highly conformal, void-free thin film that provides effective environmental protection while maintaining a compact device size [10].”
Polymeric Delivery of DNA‐Encoded Biologics
Ting, J., Dykeman-Bermingham, P. A., Cairns, C. E., Petersen, S. R., Snell, N. J., Miskin, R. P., Fisher, J. D., Murthy, S. K., Kevlahan, S., Guzman, G., et al. (2026) · Macromolecular Chemistry and Physics · doi:10.1002/macp.202500421
“Additionally, there is an extensive safety record in the use of many polymeric materials as excipients [ 42, 43 ] and as structural materials in advanced medical devices, mitigating some risks of clinical translation [ 44, 45 ].”
Ganesh, M. D., Manickasamy, M. K., Kalyani, D., Kunnumakkara, A. B., & Dobbidi, P. (2026) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2026.187498
Synthesis and elaboration of new biobased hemostatic adhesives from bacterial polymers
Wendels, S. (2021) · theses.fr (ABES) · doi:10.70675/fa67adc3z81bbz47c0zaa84z1f07cbb822b0
Green Grafting in Industrial Applications
Patil, A., Jain, D., Ghante, M. R., & Polshettiwar, S. A. (2026) · BENTHAM SCIENCE PUBLISHERS eBooks · doi:10.2174/9798898813093126010004
Designing bioactive surfaces to struggle biofouling
Nan, Z. (2021) · theses.fr (ABES) · doi:10.70675/25bbfa74z6fd0z41c5zacefz692ac46f35a2 · Cited by 1
Biocomposites à fibres longues pour la fabrication additive : Développement et optimisation
Wu, X. (2025) · theses.fr (ABES) · doi:10.70675/13163392z4fc7z46f8z98f6zf2d042533446
Hou, G., & Sun, Z. (2026) · Polymers · doi:10.3390/polym18101182
“…wear resistance, lightweight, and corrosion resistance [1–3], they play an indispensable role across a wide range of fields, including mechanical engineering [4–6], transportation [7–9], aerospace [10,11], civil engineering [12–14], medical devices [15,16], and electronic information [17,18].”
Today and the Future of Bioimplants
Sáez, J. S. D. R., Díaz, Á. G. D. L. C., Moraleda, L., Mora, M. V., & Sánchez, A. L. (2026) · Series in bioengineering · doi:10.1007/978-981-95-7557-2_8
Bone Fusion in the Cervical Spine: Where Are We Now?
Evangelisti, M. C., Mazzoli, A., Cabrilo, I., & Perale, G. (2026) · Bioengineering · doi:10.3390/bioengineering13060614
“Poly(methyl methacrylate) (PMMA) has also been extensively investigated for biomedical applications, including composite biomaterials and 3D-printed implants [47,48].”
Plastics in the Perioperative Period: Deleterious Health Effects on Patients and Providers
McNeil, J. S., Dasari, S., Calgi, M. P., Lowell, A. E., Monette, P. J., Gallo, P. D., Mazzeffi, M. A., & Berger, B. W. (2026) · Anesthesiology · doi:10.1097/aln.0000000000006048
Long‐Term Hydrophilic, Anti‐Clotting, and Anti‐Fibrotic Dynamic Covalent Silicone‐Based Biomaterials
Flores, N. A. G., Mueller, E., Bui, R., Fredenburgh, J. C., Yin, R., Hussain, R. H., Malik, R. A., Kalab, T., Abdul‐Azeez, D., Xu, F., et al. (2026) · Advanced Healthcare Materials · doi:10.1002/adhm.71278
“…has been used for the development of a range of biomedical devices such as intraocular lenses [7], microfluidic devices [8], dialysis membranes [9], finger joints [10], pacemaker lead coatings [11], and implants for plastic and reconstructive surgery [12, 13].”
Hwang, K.-H., & Kim, H. (2026) · Measurement · doi:10.1016/j.measurement.2026.122077
Self‐Expanding Cardiovascular Stents: Potentials and Challenges of Shape Memory Biomaterials
Duncan, L. R., & Owusu-Danquah, J. S. (2026) · Journal of Biomedical Materials Research Part B Applied Biomaterials · doi:10.1002/jbm.b.70114
Polymer platforms for cardiovascular disease applications
Yang, W.-J., Chen, M., Li, J., Duan, Y., Gao, H., Jin, Q., Wang, T., Zhang, Z. H., Yu, H., Jiang, B., et al. (2026) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2026.102154
Baburaj, A., Aliyana, A. K., Kumar, S. K. N., & Stylios, G. K. (2026) · Royal Society of Chemistry eBooks · doi:10.1039/9781837679850-00098
Roberts, S. M., Carter, J. S., Jensen, B. D., Vanfleet, R. R., & Davis, R. C. (2026) · Frontiers in Neuroscience · doi:10.3389/fnins.2026.1864874
“…(PI), parylene (PPX), and the epoxy-based polymer SU-8 (Tay et al., 2001; Fernández et al., 2009; Hassler et al., 2011; Ordonez et al., 2012; Kim and Meng, 2016; Teo et al., 2016; Weltman et al., 2016; Luan et al., 2017; Musk and Neuralink, 2019; Araki et al., 2020; Mariello et al., 2022).”
Golovkin, N., Krupnin, A., Pobezhimov, V. V., Antipova, C. G., & Chvalun, S. (2026) · Progress in Additive Manufacturing · doi:10.1007/s40964-026-01841-2
Cheng, Z., Liao, H., Lei, L., Wei, Z., Tong, W., Fan, C., Huang, S., Zhou, J., Yu, T., & Li, Y. (2026) · Polymer Engineering and Science · doi:10.1002/pen.70748
Biomaterials for bone regeneration
Hazarika, K., Vyas, A., Ghosh, S. B., Gupta, T., Sain, M. M., & Bandyopadhyay‐Ghosh, S. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-26739-0.00001-6
Xie, Z., An, L., Cohen, T., & Li, J. (2026) · International Journal of Engineering Science · doi:10.1016/j.ijengsci.2026.104645
Singh, G., & Pandey, A. (2026) · Journal of Mechanics in Medicine and Biology · doi:10.1142/s0219519426500661
Iacovella, F., Greenhorn, S., Pound-Lana, G., Labbe, L., Labau, S., Petit-Étienne, C., Quesnel‐Hellmann, A., Mehr, F., Uvarov, A., Zieliński, M., et al. (2026) · Micro and Nano Engineering · doi:10.1016/j.mne.2026.100391
Usatinsky, A., Higueros‐Garcia, H. L., Loai, S., Unger, S., Trueb, J. T., Usatinsky, Y., Alkallas, R., Jarad, N. A., Wu, J., Cheng, H. M., et al. (2026) · Advanced Healthcare Materials · doi:10.1002/adhm.71623
“…multiwavelength oximeter (Figure 1b) consists of a flexible printed circuit board encapsulated in a thin protective conformal coating of Parylene-C and Polydimethylsiloxane (PDMS) which perform as a water impermeable barrier and mechanically-matched interface with soft tissues [51], respectively.”
Implantable medical devices: From basics to state-of-the-art
Desai, N., Jyothi, V. G. S. S., Narang, N., Bulusu, R., Pande, S., Rao, B. V. K., Yerra, V. G., Rompicharla, S. V. K., & Kommineni, N. (2026) · Journal of Controlled Release · doi:10.1016/j.jconrel.2026.115310
Liu, Y., Xu, L., Huang, C., Wu, X., Zhou, Y., Wang, Y., Zhao, X., & Ma, S. (2026) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2026.104031
Kheizaran, J., Salman, N., Kerimzade, U., & Alaca, B. E. (2026) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2026.107611
Introduction to Resorbable Composites for Implants and Fixation Devices
Paul, A. K., Chakraborty, G., Prasad, A., & Mahto, B. (2026) · Wiley eBooks · doi:10.1002/9781394355396.ch1
Apu, M. M. H., Akter, A., GONZALEZ, A. T., Hossain, M. E., Islam, T., Veeranki, Y. R., Posada-Quintero, H. F., Mia, R., & Apu, M. M. H. (2026) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-026-02016-x
Casares-López, J. M., Hierro‐Oliva, M., Luque-Agudo, V., González-Martín, M. L., Pacha‐Olivenza, M. A., Gallardo-Moreno, A. M., & Tamurejo-Alonso, P. (2026) · Surfaces and Interfaces · doi:10.1016/j.surfin.2026.110839
Welch, M. C., Rowe, C. K., & Burke, K. A. (2026) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6c01093
Alharbi, S. A. R., Radwan, M. F., Elnobi, S., Ismail, Y. A. M., & Abuelwafa, A. A. (2026) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-026-18598-7
“These properties support its widespread application across diverse industries, including aviation, construction, automotive, advertising, medicine, and electronics [16, 17].”
Biomaterials in Menstrual Cup Design: Challenges, Innovations and Future Perspectives
Mohamad, N. A. S., Puhendhiran, T., Sawai, S., Cheah, F. K., Sudi, S., Lasimbang, H. B., & Lee, C. (2026) · Journal of Functional Biomaterials · doi:10.3390/jfb17100527
“In modern manufacturing, biomaterial selection remains one of the most critical determinants of menstrual cup performance and safety [10,25].”
Effect of FeTPPCl incorporation on the optical and dielectric properties of PMMA composite films
Abuelwafa, A. A., Abdelhamid, S. M., Dongol, M., & Elhady, A. F. (2026) · Synthetic Metals · doi:10.1016/j.synthmet.2026.118340
Svoboda, R. (2026) · Thermochimica Acta · doi:10.1016/j.tca.2026.180536
Metadata
- Authors
- Teo, A. J. T., Mishra, A., Park, I., Kim, Y.-J., Park, W.-T., & Yoon, Y.-J.
- Affiliations
- Nanyang Technological University (SG)
- Korea Advanced Institute of Science and Technology (KR)
- Seoul National University of Science and Technology (KR)
- Corresponding author
- Park, Woo-Tae
- Yoon, Yong-Jin
- Venue
- ACS Biomaterials Science & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-03-04
- Volume
- 2
- Issue
- 4
- Pages
- 454-472
- ISSN
- 2373-9878 (ISSN-L)
- OpenAlex
- W2335675049
- Cited by
- 778
- References
- 149
- Citations by year
- 2026: 46 · 2025: 90 · 2024: 107 · 2023: 85 · 2022: 84 · 2021: 93 · 2020: 81 · 2019: 75 · 2018: 65 · 2017: 44 · 2016: 8
- FWCI
- 26.15
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- ACS Biomaterials Science & Engineering (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Ministry of Education - Singapore (RG35/12, RGC4/13)
- Science and Engineering Research Council, Agency for Science, Technology and Research (SERC1121770039)
- National Research Foundation of Korea funded by the Ministry of Science, ICT & Future Planning (NRF-2013M2A2A9043274)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › Polymer Surface Interaction Studies
- Physical Sciences › Materials Science › Polymers and Plastics › Synthesis and properties of polymers
- Keywords
- polymeric biomaterials, biomedical implants, biocompatible polymers, device packaging, polymer substrates, polyvinylidene fluoride, polyethylene, polypropylene, polydimethylsiloxane, parylene, polyamide, polytetrafluoroethylene, poly(methyl methacrylate), polyimide, polyurethane, liquid crystalline polymers, polymer nanocomposites
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.