The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
High-Throughput Assisted Rationalization of the Formation of Metal Organic Frameworks in the Iron(III) Aminoterephthalate Solvothermal System
Abstract
Through the use of high-throughput methods, solvothermal reactions of FeCl 3 and 2-aminoterephthalic acid in protic as well as aprotic reaction media were systematically studied. Thus, the fields of formation of the isoreticular structures of MIL-53, MIL-88, and MIL-101 based on Fe(III) and aminoterephthalate could be identified for the first time. The resulting 3D framework materials with amino-functionalized pores have been characterized using X-ray diffraction; IR spectroscopy; and thermogravimetric, elemental, and energy dispersive X-ray analysis. Due to the applied high-throughput method, a high density of information was obtained in a short period of time, which allows the extraction of important reaction trends and contributes to a better understanding of the role of compositional as well as process parameters in the synthesis of inorganic-organic hybrid materials. We have found that the nature of the reaction medium has the most profound impact on structure formation. Furthermore, the concentration of the starting mixture (i.e., the solvent content) and the temperature have also been identified as key parameters for the formation of the different hybrid phases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reticular synthesis and the design of new materials
Yaghi, O. M., O'Keeffe, M., Ockwig, N. W., Chae, H. K., Eddaoudi, M., & Kim, J. (2003) · Nature · doi:10.1038/nature01650 · Cited by 9,101
Bond-valence parameters for solids
Brese, N. E., & O'Keeffe, M. (1991) · Acta Crystallographica Section B Structural Science · doi:10.1107/s0108768190011041 · Cited by 7,486
A Chromium Terephthalate-Based Solid with Unusually Large Pore Volumes and Surface Area
Férey, G., Mellot-Draznieks, C., Serre, C., Millange, F., Dutour, J., Surblé, S., & Margiolaki, I. (2005) · Science · doi:10.1126/science.1116275 · Cited by 5,430
Self-citationHigh-Throughput Synthesis of Zeolitic Imidazolate Frameworks and Application to CO 2 Capture
Banerjee, R., Phan, A., Wang, B., Knobler, C., Furukawa, H., O'Keeffe, M., & Yaghi, O. M. (2008) · Science · doi:10.1126/science.1152516 · Cited by 4,205
Metal–organic frameworks: a new class of porous materials
Rowsell, J. L. C., & Yaghi, O. M. (2004) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2004.03.034 · Cited by 2,963
Crystal Engineering of NLO Materials Based on Metal−Organic Coordination Networks
Evans, O. R., & Lin, W. (2002) · Accounts of Chemical Research · doi:10.1021/ar0001012 · Cited by 2,477
Fujita, M., Kwon, Y. J., Washizu, S., & Ogura, K. (1994) · Journal of the American Chemical Society · doi:10.1021/ja00082a055 · Cited by 2,374
Zeolite molecular sieves—Structure, chemistry and use
Pearce, H. A. (1975) · Journal of Chromatography A · doi:10.1016/s0021-9673(00)93871-8 · Cited by 2,104
Metal–Organic Frameworks as Efficient Materials for Drug Delivery
Horcajada, P., Serre, C., Vallet‐Regí, M., Sebban, M., Taulelle, F., & Férey, G. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200601878 · Cited by 2,024
Self-citationSerre, C., Millange, F., Thouvenot, C., Noguès, M., Marsolier, G., Louër, D., & Férey, G. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0276974 · Cited by 1,980
Self-citation
Cited by
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Stock, N., & Biswas, S. (2012) · Chemical Reviews · doi:10.1021/cr200304e · Cited by 5,045
Self-citationHorcajada, P., Chalati, T., Serre, C., Gillet, B., Sebrie, C., Baati, T., Eubank, J. F., Heurtaux, D., Clayette, P., Kreuz, C., et al. (2010) · Nature Materials · doi:10.1038/nmat2608 · Cited by 4,260
Self-citationStable Metal–Organic Frameworks: Design, Synthesis, and Applications
Yuan, S., Feng, L., Wang, K., Pang, J., Bosch, M., Lollar, C., Sun, Y., Qin, J., Yang, X., Zhang, P., et al. (2018) · Advanced Materials · doi:10.1002/adma.201704303 · Cited by 2,981
Applications of metal–organic frameworks in heterogeneous supramolecular catalysis
Liu, J., Chen, L., Cui, H., Zhang, J., Zhang, L., & Su, C.-Y. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00094c · Cited by 2,894
Postsynthetic Methods for the Functionalization of Metal–Organic Frameworks
Cohen, S. M. (2012) · Chemical Reviews · doi:10.1021/cr200179u · Cited by 2,336
Tuning the structure and function of metal–organic frameworks via linker design
Lu, W., Wei, Z., Gu, Z.-Y., Liu, T.-F., Park, J., Park, J., Tian, J., Zhang, M., Zhang, Q., Gentle III, T., et al. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00003j · Cited by 2,252
Metal–Organic Frameworks: Opportunities for Catalysis
Farrusseng, D., Aguado, S., & Pinel, C. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200806063 · Cited by 1,888
Taylor-Pashow, K. M. L., Della Rocca, J., Xie, Z., Tran, S., & Lin, W. (2009) · Journal of the American Chemical Society · doi:10.1021/ja906198y · Cited by 1,522
Metal–organic frameworks as selectivity regulators for hydrogenation reactions
Zhao, M., Yuan, K., Wang, Y., Li, G., Guo, J., Gu, L., Hu, W., Zhao, H., & Tang, Z. (2016) · Nature · doi:10.1038/nature19763 · Cited by 1,500
MOFs, MILs and more: concepts, properties and applications for porous coordination networks (PCNs)
Janiak, C., & Vieth, J. K. (2010) · New Journal of Chemistry · doi:10.1039/c0nj00275e · Cited by 1,185
Metal–organic frameworks as platforms for clean energy
Li, S.-L., & Xu, Q. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40507a · Cited by 970
Xu, X., Cao, R., Jeong, S., & Cho, J. (2012) · Nano Letters · doi:10.1021/nl302618s · Cited by 914
Wang, D., Huang, R., Liu, W., Sun, D., & Li, Z. (2014) · ACS Catalysis · doi:10.1021/cs501169t · Cited by 869
Metal–organic framework based mixed matrix membranes: a solution for highly efficient CO2capture?
Seoane, B., Coronas, J., Gascon, I., Benavides, M. E., Karvan, O., Caro, J., Kapteijn, F., & Gascon, J. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00437j · Cited by 845
Metal–organic frameworks as potential drug carriers
Huxford, R. C., Della Rocca, J., & Lin, W. (2010) · Current Opinion in Chemical Biology · doi:10.1016/j.cbpa.2009.12.012 · Cited by 840
Amino-based metal-organic frameworks as stable, highly active basic catalysts
GASCON, J., AKTAY, U., HERNANDEZALONSO, M., VANKLINK, G., & KAPTEIJN, F. (2009) · Journal of Catalysis · doi:10.1016/j.jcat.2008.11.010 · Cited by 667
High drug-loading nanomedicines: progress, current status, and prospects
Shen, S., Wu, Y., Liu, Y., & Wu, D. (2017) · International Journal of Nanomedicine · doi:10.2147/ijn.s132780 · Cited by 618
Biomedical Applications of Metal Organic Frameworks
Keskin, S., & Kızılel, S. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie101312k · Cited by 607
Application of MOF materials as drug delivery systems for cancer therapy and dermal treatment
Mallakpour, S., Nikkhoo, E., & Hussain, C. M. (2022) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2021.214262 · Cited by 607
High valence 3p and transition metal based MOFs
Devic, T., & Serre, C. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00081a · Cited by 605
Self-citationBrønsted Acidity in Metal–Organic Frameworks
Jiang, J., & Yaghi, O. M. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00221 · Cited by 581
Electrochemical Synthesis of Some Archetypical Zn2+, Cu2+, and Al3+ Metal Organic Frameworks
Martinez Joaristi, A., Juan-Alcañiz, J., Serra-Crespo, P., Kapteijn, F., & Gascon, J. (2012) · Crystal Growth & Design · doi:10.1021/cg300552w · Cited by 569
Serra-Crespo, P., Ramos-Fernandez, E. V., Gascon, J., & Kapteijn, F. (2011) · Chemistry of Materials · doi:10.1021/cm103644b · Cited by 538
Devic, T., Horcajada, P., Serre, C., Salles, F., Maurin, G., Moulin, B., Heurtaux, D., Clet, G., Vimont, A., Grenèche, J.-M., et al. (2010) · Journal of the American Chemical Society · doi:10.1021/ja9092715 · Cited by 531
Self-citationAdsorption-Driven Heat Pumps: The Potential of Metal–Organic Frameworks
de Lange, M. F., Verouden, K. J. F. M., Vlugt, T. J. H., Gascon, J., & Kapteijn, F. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00059 · Cited by 510
Metal–organic frameworks in mixed-matrix membranes for gas separation
Tanh Jeazet, H. B., Staudt, C., & Janiak, C. (2012) · Dalton Transactions · doi:10.1039/c2dt31550e · Cited by 495
Shi, L., Wang, T., Zhang, H., Chang, K., Meng, X., Liu, H., & Ye, J. (2015) · Advanced Science · doi:10.1002/advs.201500006 · Cited by 471
Synthesis and Modification of a Functionalized 3D Open-Framework Structure with MIL-53 Topology
Ahnfeldt, T., Gunzelmann, D., Loiseau, T., Hirsemann, D., Senker, J., Férey, G., & Stock, N. (2009) · Inorganic Chemistry · doi:10.1021/ic8023265 · Cited by 417
Self-citationHaque, E., Lo, V., Minett, A. I., Harris, A. T., & Church, T. L. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta13589f · Cited by 399
Li, Y., Fang, Y., Cao, Z., Li, N., Chen, D., Xu, Q., & Lu, J. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2019.03.024 · Cited by 397
Design and fabrication of mesoporous heterogeneous basic catalysts
Sun, L.-B., Liu, X.-Q., & Zhou, H.-C. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00090d · Cited by 386
Xie, Q., Li, Y., Lv, Z., Zhou, H., Yang, X., Chen, J., & Guo, H. (2017) · Scientific Reports · doi:10.1038/s41598-017-03526-x · Cited by 385
Seetharaj, R., Vandana, P. V., Arya, P., & Mathew, S. (2019) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2016.01.003 · Cited by 376
A Review on Breathing Behaviors of Metal-Organic-Frameworks (MOFs) for Gas Adsorption
Alhamami, M., Doan, H., & Cheng, C.-H. (2014) · Materials · doi:10.3390/ma7043198 · Cited by 367
Metal–organic frameworks for photocatalysis
Li, Y., Xu, H., Ouyang, S., & Ye, J. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c5cp05885f · Cited by 362
Yang, B., Ding, L., Yao, H., Chen, Y., & Shi, J. (2020) · Advanced Materials · doi:10.1002/adma.201907152 · Cited by 360
The Chemistry of Reticular Framework Nanoparticles: MOF, ZIF, and COF Materials
Ploetz, E., Engelke, H., Lächelt, U., & Wuttke, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909062 · Cited by 350
Sumida, K., Horike, S., Kaye, S. S., Herm, Z. R., Queen, W. L., Brown, C. M., Grandjean, F., Long, G. J., Dailly, A., & Long, J. R. (2010) · Chemical Science · doi:10.1039/c0sc00179a · Cited by 347
Application of QD-MOF composites for photocatalysis: Energy production and environmental remediation
Wu, T., Liu, X., Liu, Y., Cheng, M., Liu, Z., Zeng, G., Shao, B., Liang, Q., Zhang, W., He, Q., et al. (2020) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.213097 · Cited by 347
Cao, X., Zheng, B., Rui, X., Shi, W., Yan, Q., & Zhang, H. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201308013 · Cited by 335
Ahnfeldt, T., Guillou, N., Gunzelmann, D., Margiolaki, I., Loiseau, T., Férey, G., Senker, J., & Stock, N. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200901409 · Cited by 329
Self-citationZorainy, M. Y., Gar Alalm, M., Kaliaguine, S., & Boffito, D. C. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta06238g · Cited by 326
Biswas, S., Ahnfeldt, T., & Stock, N. (2011) · Inorganic Chemistry · doi:10.1021/ic201219g · Cited by 303
Self-citationRuyra, À., Yazdi, A., Espín, J., Carné‐Sánchez, A., Roher, N., Lorenzo, J., Imaz, I., & Maspoch, D. (2015) · Chemistry – A European Journal · doi:10.1002/chem.201405380 · Cited by 299
Ma, M., Bétard, A., Weber, I., Al-Hokbany, N. S., Fischer, R. A., & Metzler-Nolte, N. (2013) · Crystal Growth & Design · doi:10.1021/cg301738p · Cited by 298
Younis, S. A., Kwon, E. E., Qasim, M., Kim, K.-H., Kim, T., Kukkar, D., Dou, X., & Ali, I. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100870 · Cited by 289
Taking organic reactions over metal-organic frameworks as heterogeneous catalysis
Hu, M.-L., Safarifard, V., Doustkhah, E., Rostamnia, S., Morsali, A., Nouruzi, N., Beheshti, S., & Akhbari, K. (2018) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2017.07.057 · Cited by 283
Dong, Z., Sun, Y., Chu, J., Zhang, X., & Deng, H. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07392 · Cited by 282
Jeremias, F., Lozan, V., Henninger, S. K., & Janiak, C. (2013) · Dalton Transactions · doi:10.1039/c3dt51471d · Cited by 279
A novel magnetic MIL-101(Fe)/TiO2 composite for photo degradation of tetracycline under solar light
He, L., Dong, Y., Zheng, Y., Jia, Q., Shan, S., & Zhang, Y. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2018.08.079 · Cited by 278
Chen, J., Liu, J., Xie, J.-Q., Ye, H., Fu, X.-Z., Sun, R., & Wong, C.-P. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.11.051 · Cited by 277
Novel Route to Size-Controlled Fe–MIL-88B–NH2 Metal–Organic Framework Nanocrystals
Pham, M.-H., Vuong, G.-T., Vu, A.-T., & Do, T.-O. (2011) · Langmuir · doi:10.1021/la203570h · Cited by 273
Canivet, J., Aguado, S., Schuurman, Y., & Farrusseng, D. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312120x · Cited by 269
Bernini, M. C., Fairen-Jimenez, D., Pasinetti, M., Ramirez-Pastor, A. J., & Snurr, R. Q. (2014) · J. Mater. Chem. B · doi:10.1039/c3tb21328e · Cited by 263
Amine-functionalized metal–organic frameworks: structure, synthesis and applications
Lin, Y., Kong, C., & Chen, L. (2016) · RSC Advances · doi:10.1039/c6ra01536k · Cited by 256
Metadata
- Authors
- Bauer, S., Serre, C., Devic, T., Horcajada, P., Marrot, J., Férey, G., & Stock, N.
- Venue
- Inorganic Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-08-06
- Volume
- 47
- Issue
- 17
- Pages
- 7568-7576
- ISSN
- 0020-1669 (ISSN-L)
- 1520-510X
- OpenAlex
- W2041777058
- Cited by
- 620
- References
- 33
- FWCI
- 13.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.