The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
The Li-Ion Rechargeable Battery: A Perspective
Abstract
Each cell of a battery stores electrical energy as chemical energy in two electrodes, a reductant (anode) and an oxidant (cathode), separated by an electrolyte that transfers the ionic component of the chemical reaction inside the cell and forces the electronic component outside the battery. The output on discharge is an external electronic current I at a voltage V for a time Δt. The chemical reaction of a rechargeable battery must be reversible on the application of a charging I and V. Critical parameters of a rechargeable battery are safety, density of energy that can be stored at a specific power input and retrieved at a specific power output, cycle and shelf life, storage efficiency, and cost of fabrication. Conventional ambient-temperature rechargeable batteries have solid electrodes and a liquid electrolyte. The positive electrode (cathode) consists of a host framework into which the mobile (working) cation is inserted reversibly over a finite solid-solution range. The solid-solution range, which is reduced at higher current by the rate of transfer of the working ion across electrode/electrolyte interfaces and within a host, limits the amount of charge per electrode formula unit that can be transferred over the time Δt = Δt(I). Moreover, the difference between energies of the LUMO and the HOMO of the electrolyte, i.e., electrolyte window, determines the maximum voltage for a long shelf and cycle life. The maximum stable voltage with an aqueous electrolyte is 1.5 V; the Li-ion rechargeable battery uses an organic electrolyte with a larger window, which increase the density of stored energy for a given Δt. Anode or cathode electrochemical potentials outside the electrolyte window can increase V, but they require formation of a passivating surface layer that must be permeable to Li(+) and capable of adapting rapidly to the changing electrode surface area as the electrode changes volume during cycling. A passivating surface layer adds to the impedance of the Li(+) transfer across the electrode/electrolyte interface and lowers the cycle life of a battery cell. Moreover, formation of a passivation layer on the anode robs Li from the cathode irreversibly on an initial charge, further lowering the reversible Δt. These problems plus the cost of quality control of manufacturing plague development of Li-ion rechargeable batteries that can compete with the internal combustion engine for powering electric cars and that can provide the needed low-cost storage of electrical energy generated by renewable wind and/or solar energy. Chemists are contributing to incremental improvements of the conventional strategy by investigating and controlling electrode passivation layers, improving the rate of Li(+) transfer across electrode/electrolyte interfaces, identifying electrolytes with larger windows while retaining a Li(+) conductivity σ(Li) > 10(-3) S cm(-1), synthesizing electrode morphologies that reduce the size of the active particles while pinning them on current collectors of large surface area accessible by the electrolyte, lowering the cost of cell fabrication, designing displacement-reaction anodes of higher capacity that allow a safe, fast charge, and designing alternative cathode hosts. However, new strategies are needed for batteries that go beyond powering hand-held devices, such as using electrode hosts with two-electron redox centers; replacing the cathode hosts by materials that undergo displacement reactions (e.g. sulfur) by liquid cathodes that may contain flow-through redox molecules, or by catalysts for air cathodes; and developing a Li(+) solid electrolyte separator membrane that allows an organic and aqueous liquid electrolyte on the anode and cathode sides, respectively. Opportunities exist for the chemist to bring together oxide and polymer or graphene chemistry in imaginative morphologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Self-citationA Perovskite Oxide Optimized for Oxygen Evolution Catalysis from Molecular Orbital Principles
Suntivich, J., May, K. J., Gasteiger, H. A., Goodenough, J. B., & Shao-Horn, Y. (2011) · Science · doi:10.1126/science.1212858 · Cited by 5,441
Self-citationLixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Self-citationStability of polyatomic molecules in degenerate electronic states - I—Orbital degeneracy
Jahn, H. A., & Teller, E. (1937) · Proceedings of the Royal Society of London. Series A - Mathematical and Physical Sciences · doi:10.1098/rspa.1937.0142 · Cited by 3,215
Suntivich, J., Gasteiger, H. A., Yabuuchi, N., Nakanishi, H., Goodenough, J. B., & Shao-Horn, Y. (2011) · Nature Chemistry · doi:10.1038/nchem.1069 · Cited by 2,904
Self-citationPeled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
Fast Na+-ion transport in skeleton structures
Goodenough, J. B., Hong, H. Y.-P., & Kafalas, J. A. (1976) · Materials Research Bulletin · doi:10.1016/0025-5408(76)90077-5 · Cited by 2,284
Self-citationScrosati, B., Magistris, A., Mari, C. M., & Mariotto, G. (1993) · Springer eBooks · doi:10.1007/978-94-011-1916-0 · Cited by 2,218
Electrical Energy Storage and Intercalation Chemistry
Whittingham, M. S. (1976) · Science · doi:10.1126/science.192.4244.1126 · Cited by 1,919
Cited by
Items 101–200 of 406
Reconfiguring Hard Carbons with Emerging Sodium‐Ion Batteries: A Perspective
Chu, Y., Zhang, J., Zhang, Y., Li, Q., Jia, Y., Dong, X., Xiao, J., Tao, Y., & Yang, Q. (2023) · Advanced Materials · doi:10.1002/adma.202212186 · Cited by 602
Ionic liquids and derived materials for lithium and sodium batteries
Yang, Q., Zhang, Z., Sun, X.-G., Hu, Y.-S., Xing, H., & Dai, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00464h · Cited by 601
Seh, Z. W., Yu, J. H., Li, W., Hsu, P.-C., Wang, H., Sun, Y., Yao, H., Zhang, Q., & Cui, Y. (2014) · Nature Communications · doi:10.1038/ncomms6017 · Cited by 600
Ether-based electrolytes for sodium ion batteries
Li, Y., Wu, F., Li, Y., Liu, M., Feng, X., Bai, Y., & Wu, C. (2022) · Chemical Society Reviews · doi:10.1039/d1cs00948f · Cited by 597
Exploring competitive features of stationary sodium ion batteries for electrochemical energy storage
Liu, T., Zhang, Y., Jiang, Z., Zeng, X., Ji, J., Li, Z., Gao, X., Sun, M., Lin, Z., Ling, M., et al. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03727b · Cited by 592
Lin, D., Yuen, P. Y., Liu, Y., Liu, W., Liu, N., Dauskardt, R. H., & Cui, Y. (2018) · Advanced Materials · doi:10.1002/adma.201802661 · Cited by 589
Balancing interfacial reactions to achieve long cycle life in high-energy lithium metal batteries
Niu, C., Liu, D., Lochala, J. A., Anderson, C. S., Cao, X., Gross, M. E., Xu, W., Zhang, J.-G., Whittingham, M. S., Xiao, J., et al. (2021) · Nature Energy · doi:10.1038/s41560-021-00852-3 · Cited by 588
Huang, S., Li, Z., Wang, B., Zhang, J., Peng, Z., Qi, R., Wang, J., & Zhao, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201706294 · Cited by 585
Alfaruqi, M. H., Mathew, V., Song, J., Kim, S., Islam, S., Pham, D. T., Jo, J., Kim, S., Baboo, J. P., Xiu, Z., et al. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b05092 · Cited by 577
Advances in the Cathode Materials for Lithium Rechargeable Batteries
Lee, W., Muhammad, S., Sergey, C., Lee, H., Yoon, J., Kang, Y., & Yoon, W. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201902359 · Cited by 577
Iron‐Oxide‐Based Advanced Anode Materials for Lithium‐Ion Batteries
Zhang, L., Wu, H. B., & Lou, X. W. (. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300958 · Cited by 576
Roy, J. J., Rarotra, S., Krikstolaityte, V., Zhuoran, K. W., Cindy, Y. D., Tan, X. Y., Carboni, M., Meyer, D., Yan, Q., & Srinivasan, M. (2022) · Advanced Materials · doi:10.1002/adma.202103346 · Cited by 575
Hierarchically Nanostructured Transition Metal Oxides for Lithium‐Ion Batteries
Zheng, M., Tang, H., Li, L., Hu, Q., Zhang, L., Xue, H., & Pang, H. (2018) · Advanced Science · doi:10.1002/advs.201700592 · Cited by 571
Recent Progress on Zn Anodes for Advanced Aqueous Zinc‐Ion Batteries
Nie, C., Wang, G., Wang, D., Wang, M., Gao, X., Bai, Z., Wang, N., Yang, J., Xing, Z., & Dou, S. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202300606 · Cited by 561
Clément, R. J., Lun, Z., & Ceder, G. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02803j · Cited by 560
Black phosphorus composites with engineered interfaces for high-rate high-capacity lithium storage
Jin, H., Xin, S., Chuang, C., Li, W., Wang, H., Zhu, J., Xie, H., Zhang, T., Wan, Y., Qi, Z., et al. (2020) · Science · doi:10.1126/science.aav5842 · Cited by 558
Self-citationOlivine LiFePO4: the remaining challenges for future energy storage
Wang, J., & Sun, X. (2015) · Energy & Environmental Science · doi:10.1039/c4ee04016c · Cited by 550
Xu, J., Dou, Y., Wei, Z., Ma, J., Deng, Y., Li, Y., Liu, H., & Dou, S. (2017) · Advanced Science · doi:10.1002/advs.201700146 · Cited by 550
Graphene Quantum Dots Coated VO2 Arrays for Highly Durable Electrodes for Li and Na Ion Batteries
Chao, D., Zhu, C., Xia, X., Liu, J., Zhang, X., Wang, J., Liang, P., Lin, J., Zhang, H., Shen, Z. X., et al. (2015) · Nano Letters · doi:10.1021/nl504038s · Cited by 546
Multifunctional Energy Storage and Conversion Devices
Huang, Y., Zhu, M., Huang, Y., Pei, Z., Li, H., Wang, Z., Xue, Q., & Zhi, C. (2016) · Advanced Materials · doi:10.1002/adma.201601928 · Cited by 544
Liu, M., Rong, Z., Malik, R., Canepa, P., Jain, A., Ceder, G., & Persson, K. A. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03389b · Cited by 534
Subzero‐Temperature Cathode for a Sodium‐Ion Battery
You, Y., Yao, H., Xin, S., Yin, Y., Zuo, T., Yang, C., Guo, Y., Cui, Y., Wan, L., & Goodenough, J. B. (2016) · Advanced Materials · doi:10.1002/adma.201600846 · Cited by 534
Self-citationOxygen Release Degradation in Li‐Ion Battery Cathode Materials: Mechanisms and Mitigating Approaches
Sharifi‐Asl, S., Lu, J., Amine, K., & Shahbazian‐Yassar, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900551 · Cited by 532
Exploring Anomalous Charge Storage in Anode Materials for Next-Generation Li Rechargeable Batteries
Kim, H., Choi, W., Yoon, J., Um, J. H., Lee, W., Kim, J., Cabana, J., & Yoon, W.-S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00618 · Cited by 527
Carbon as catalyst and support for electrochemical energy conversion
Trogadas, P., Fuller, T. F., & Strasser, P. (2014) · Carbon · doi:10.1016/j.carbon.2014.04.005 · Cited by 522
Wu, K., Huang, J., Yi, J., Liu, X., Liu, Y., Wang, Y., Zhang, J., & Xia, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903977 · Cited by 522
Black Phosphorus Rediscovered: From Bulk Material to Monolayers
Gusmão, R., Sofer, Z., & Pumera, M. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201610512 · Cited by 521
Applications of Phosphorene and Black Phosphorus in Energy Conversion and Storage Devices
Pang, J., Bachmatiuk, A., Yin, Y., Trzebicka, B., Zhao, L., Fu, L., Mendes, R. G., Gemming, T., Liu, Z., & Rummeli, M. H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702093 · Cited by 518
Challenges and advances in wide-temperature rechargeable lithium batteries
Feng, Y., Zhou, L., Ma, H., Wu, Z., Zhao, Q., Li, H., Zhang, K., & Chen, J. (2022) · Energy & Environmental Science · doi:10.1039/d1ee03292e · Cited by 517
Nanostructured energy materials for electrochemical energy conversion and storage: A review
Zhang, X., Cheng, X., & Zhang, Q. (2016) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2016.11.003 · Cited by 516
Host Materials Anchoring Polysulfides in Li–S Batteries Reviewed
Zhou, L., Danilov, D. L., Eichel, R., & Notten, P. H. L. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202001304 · Cited by 516
Exploring metal organic frameworks for energy storage in batteries and supercapacitors
Xu, G., Nie, P., Dou, H., Ding, B., Li, L., & Zhang, X. (2017) · Materials Today · doi:10.1016/j.mattod.2016.10.003 · Cited by 512
Ionic liquids for energy, materials, and medicine
Smiglak, M., Pringle, J. M., Lu, X., Han, L., Zhang, S., Gao, H., MacFarlane, D. R., & Rogers, R. D. (2014) · Chem. Commun. · doi:10.1039/c4cc02021a · Cited by 509
Kraft, M. A., Ohno, S., Zinkevich, T., Koerver, R., Culver, S. P., Fuchs, T., Senyshyn, A., Indris, S., Morgan, B. J., & Zeier, W. G. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b10282 · Cited by 509
Progress in Mechanistic Understanding and Characterization Techniques of Li‐S Batteries
Xu, R., Lu, J., & Amine, K. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500408 · Cited by 507
Indra, A., Song, T., & Paik, U. (2018) · Advanced Materials · doi:10.1002/adma.201705146 · Cited by 507
Anodes for Rechargeable Lithium‐Sulfur Batteries
Cao, R., Xu, W., Lv, D., Xiao, J., & Zhang, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402273 · Cited by 502
Perspectives for Polymer Electrolytes: A View from Fundamentals of Ionic Conductivity
Bocharova, V., & Sokolov, A. P. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b02742 · Cited by 499
Zhang, X., Belharouak, I., Li, L., Lei, Y., Elam, J. W., Nie, A., Chen, X., Yassar, R. S., & Axelbaum, R. L. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300269 · Cited by 495
Phosphorene and Phosphorene‐Based Materials – Prospects for Future Applications
Batmunkh, M., Bat‐Erdene, M., & Shapter, J. G. (2016) · Advanced Materials · doi:10.1002/adma.201602254 · Cited by 494
Kundu, D., Oberholzer, P., Glaros, C., Bouzid, A., Tervoort, E., Pasquarello, A., & Niederberger, M. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b01317 · Cited by 493
Zhou, J., Li, R., Fan, X., Chen, Y., Han, R., Li, W., Zheng, J., Wang, B., & Li, X. (2014) · Energy & Environmental Science · doi:10.1039/c4ee01382d · Cited by 492
Zhai, H., Xu, P., Ning, M., Cheng, Q., Mandal, J., & Yang, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00715 · Cited by 490
Stable Li Metal Anodes via Regulating Lithium Plating/Stripping in Vertically Aligned Microchannels
Wang, S., Yin, Y., Zuo, T., Dong, W., Li, J., Shi, J., Zhang, C., Li, N., Li, C., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201703729 · Cited by 484
Dendrite-Free Li-Metal Battery Enabled by a Thin Asymmetric Solid Electrolyte with Engineered Layers
Duan, H., Yin, Y.-X., Shi, Y., Wang, P.-F., Zhang, X.-D., Yang, C.-P., Shi, J.-L., Wen, R., Guo, Y.-G., & Wan, L.-J. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10864 · Cited by 482
MoS2‐Based Nanocomposites for Electrochemical Energy Storage
Wang, T., Chen, S., Pang, H., Xue, H., & Yu, Y. (2017) · Advanced Science · doi:10.1002/advs.201600289 · Cited by 481
Reverse Dual-Ion Battery via a ZnCl2 Water-in-Salt Electrolyte
Wu, X., Xu, Y., Zhang, C., Leonard, D. P., Markir, A., Lu, J., & Ji, X. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b00617 · Cited by 481
Silicon Microparticle Anodes with Self-Healing Multiple Network Binder
Xu, Z., Yang, J., Zhang, T., Nuli, Y., Wang, J., & Hirano, S.-I. (2018) · Joule · doi:10.1016/j.joule.2018.02.012 · Cited by 480
Recent progress on silicon-based anode materials for practical lithium-ion battery applications
Li, P., Zhao, G., Zheng, X., Xu, X., Yao, C., Sun, W., & Dou, S. X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.07.014 · Cited by 480
Scalable and safe synthetic organic electroreduction inspired by Li-ion battery chemistry
Peters, B. K., Rodriguez, K. X., Reisberg, S. H., Beil, S. B., Hickey, D. P., Kawamata, Y., Collins, M., Starr, J., Chen, L., Udyavara, S., et al. (2019) · Science · doi:10.1126/science.aav5606 · Cited by 478
Hausbrand, R., Cherkashinin, G., Ehrenberg, H., Gröting, M., Albe, K., Hess, C., & Jaegermann, W. (2015) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2014.11.014 · Cited by 478
Understanding undesirable anode lithium plating issues in lithium-ion batteries
Liu, Q., Du, C., Shen, B., Zuo, P., Cheng, X., Ma, Y., Yin, G., & Gao, Y. (2016) · RSC Advances · doi:10.1039/c6ra19482f · Cited by 473
Zhang, J.-N., Li, Q., Wang, Y., Zheng, J., Yu, X., & Li, H. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.016 · Cited by 473
Electrochemically activated spinel manganese oxide for rechargeable aqueous aluminum battery
Wu, C., Gu, S., Zhang, Q., Bai, Y., Li, M., Yuan, Y., Wang, H., Liu, X., Yuan, Y., Zhu, N., et al. (2019) · Nature Communications · doi:10.1038/s41467-018-07980-7 · Cited by 471
A cyclic phosphate-based battery electrolyte for high voltage and safe operation
Zheng, Q., Yamada, Y., Shang, R., Ko, S., Lee, Y.-Y., Kim, K., Nakamura, E., & Yamada, A. (2020) · Nature Energy · doi:10.1038/s41560-020-0567-z · Cited by 469
Duan, H., Fan, M., Chen, W., Li, J., Wang, P., Wang, W., Shi, J., Yin, Y., Wan, L., & Guo, Y. (2019) · Advanced Materials · doi:10.1002/adma.201807789 · Cited by 466
Lin, D., Liu, Y., Chen, W., Zhou, G., Liu, K., Dunn, B., & Cui, Y. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01020 · Cited by 465
Research Progress on Negative Electrodes for Practical Li‐Ion Batteries: Beyond Carbonaceous Anodes
Aravindan, V., Lee, Y., & Madhavi, S. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402225 · Cited by 462
An Advanced Lithium-Ion Battery Based on a Graphene Anode and a Lithium Iron Phosphate Cathode
Hassoun, J., Bonaccorso, F., Agostini, M., Angelucci, M., Betti, M. G., Cingolani, R., Gemmi, M., Mariani, C., Panero, S., Pellegrini, V., et al. (2014) · Nano Letters · doi:10.1021/nl502429m · Cited by 461
Zeng, X.-X., Yin, Y.-X., Li, N.-W., Du, W.-C., Guo, Y.-G., & Wan, L.-J. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10088 · Cited by 459
Zhao, Y., Ding, Y., Li, Y., Peng, L., Byon, H. R., Goodenough, J. B., & Yu, G. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00289c · Cited by 458
Self-citationAluminium-ion batteries: developments and challenges
Das, S. K., Mahapatra, S., & Lahan, H. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00228a · Cited by 458
Jun, B.-M., Kim, S., Heo, J., Park, C. M., Her, N., Jang, M., Huang, Y., Han, J., & Yoon, Y. (2019) · Nano Research · doi:10.1007/s12274-018-2225-3 · Cited by 457
Kuznetsov, D. A., Han, B., Yu, Y., Rao, R. R., Hwang, J., Román-Leshkov, Y., & Shao-Horn, Y. (2018) · Joule · doi:10.1016/j.joule.2017.11.014 · Cited by 452
Structural Engineering of 2D Nanomaterials for Energy Storage and Catalysis
Zhu, Y., Peng, L., Fang, Z., Yan, C., Zhang, X., & Yu, G. (2018) · Advanced Materials · doi:10.1002/adma.201706347 · Cited by 451
Advanced Materials for Printed Wearable Electrochemical Devices: A Review
Kim, J., Kumar, R., Bandodkar, A. J., & Wang, J. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201600260 · Cited by 452
Tong, X., Zhang, F., Ji, B., Sheng, M., & Tang, Y. (2016) · Advanced Materials · doi:10.1002/adma.201603735 · Cited by 449
Huang, J., Xie, Y., You, Y., Yuan, J., Xu, Q., Xie, H., & Chen, Y. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202213095 · Cited by 448
Wu, J., Liang, Q., Yu, X., Lü, Q., Ma, L., Qin, X., Chen, G., & Li, B. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202011102 · Cited by 447
Deng, D.-R., Xue, F., Jia, Y.-J., Ye, J.-C., Bai, C.-D., Zheng, M.-S., & Dong, Q.-F. (2017) · ACS Nano · doi:10.1021/acsnano.7b01945 · Cited by 446
Hollow Carbon-Nanotube/Carbon-Nanofiber Hybrid Anodes for Li-Ion Batteries
Chen, Y., Li, X., Park, K., Song, J., Hong, J., Zhou, L., Mai, Y.-W., Huang, H., & Goodenough, J. B. (2013) · Journal of the American Chemical Society · doi:10.1021/ja408421n · Cited by 444
Self-citationStable cycling of lithium sulfide cathodes through strong affinity with a bifunctional binder
Seh, Z. W., Zhang, Q., Li, W., Zheng, G., Yao, H., & Cui, Y. (2013) · Chemical Science · doi:10.1039/c3sc51476e · Cited by 442
Nanowires for Electrochemical Energy Storage
Zhou, G., Xu, L., Hu, G., Mai, L., & Cui, Y. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00326 · Cited by 439
Zhang, J., Zang, X., Wen, H., Dong, T., Chai, J., Li, Y., Chen, B., Zhao, J., Dong, S., Ma, J., et al. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10066j · Cited by 430
Achievements, Challenges, and Prospects of Calcium Batteries
Arroyo-de Dompablo, M. E., Ponrouch, A., Johansson, P., & Palacín, M. R. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00339 · Cited by 429
Small things make a big difference: binder effects on the performance of Li and Na batteries
Chou, S.-L., Pan, Y., Wang, J.-Z., Liu, H.-K., & Dou, S.-X. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp02475c · Cited by 428
Uniform yolk-shell iron sulfide–carbon nanospheres for superior sodium–iron sulfide batteries
Wang, Y.-X., Yang, J., Chou, S.-L., Liu, H. K., Zhang, W.-X., Zhao, D., & Dou, S. X. (2015) · Nature Communications · doi:10.1038/ncomms9689 · Cited by 427
Recent advancement of SiOx based anodes for lithium-ion batteries
Chen, T., Wu, J., Zhang, Q., & Su, X. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.07.073 · Cited by 427
Defect Engineering in Manganese‐Based Oxides for Aqueous Rechargeable Zinc‐Ion Batteries: A Review
Xiong, T., Zhang, Y., Lee, W. S. V., & Xue, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202001769 · Cited by 427
Leng, J., Wang, Z., Wang, J., Wu, H.-H., Yan, G., Li, X., Guo, H., Liu, Y., Zhang, Q., & Guo, Z. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00904j · Cited by 425
A graphene-like metallic cathode host for long-life and high-loading lithium–sulfur batteries
Pang, Q., Kundu, D., & Nazar, L. F. (2016) · Materials Horizons · doi:10.1039/c5mh00246j · Cited by 424
A review on various temperature-indication methods for Li-ion batteries
Raijmakers, L. H. J., Danilov, D. L., Eichel, R.-A., & Notten, P. H. L. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.02.078 · Cited by 424
Critical Challenges in Rechargeable Aprotic Li–O2 Batteries
Feng, N., He, P., & Zhou, H. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502303 · Cited by 423
Tang, Y., Zhang, Y., Deng, J., Wei, J., Tam, H. L., Chandran, B. K., Dong, Z., Chen, Z., & Chen, X. (2014) · Advanced Materials · doi:10.1002/adma.201402000 · Cited by 422
Chen, B., Chao, D., Liu, E., Jaroniec, M., Zhao, N., & Qiao, S.-Z. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03549d · Cited by 421
Polymer‐Based Solid Electrolytes: Material Selection, Design, and Application
Xi, G., Xiao, M., Wang, S., Han, D., Li, Y., & Meng, Y. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202007598 · Cited by 421
Fundamentals and Challenges of Lithium Ion Batteries at Temperatures between −40 and 60 °C
Hou, J., Yang, M., Wang, D., & Zhang, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904152 · Cited by 419
New Family of Argyrodite Thioantimonate Lithium Superionic Conductors
Zhou, L., Assoud, A., Zhang, Q., Wu, X., & Nazar, L. F. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b08357 · Cited by 416
High‐Capacity Cathode Material with High Voltage for Li‐Ion Batteries
Shi, J., Xiao, D., Ge, M., Yu, X., Chu, Y., Huang, X., Zhang, X., Yin, Y., Yang, X., Guo, Y., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705575 · Cited by 415
Samadi, M., Sarikhani, N., Zirak, M., Zhang, H., Zhang, H.-L., & Moshfegh, A. Z. (2018) · Nanoscale Horizons · doi:10.1039/c7nh00137a · Cited by 408
Chen, Y. M., Yu, X. Y., Li, Z., Paik, U., & Lou, X. W. (. (2016) · Science Advances · doi:10.1126/sciadv.1600021 · Cited by 405
Maleki Kheimeh Sari, H., & Li, X. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901597 · Cited by 403
Electrospun nanofibers as a platform for advanced secondary batteries: a comprehensive review
Jung, J.-W., Lee, C.-L., Yu, S., & Kim, I.-D. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta06844d · Cited by 402
Rechargeable aluminium organic batteries
Kim, D. J., Yoo, D.-J., Otley, M. T., Prokofjevs, A., Pezzato, C., Owczarek, M., Lee, S. J., Choi, J. W., & Stoddart, J. F. (2018) · Nature Energy · doi:10.1038/s41560-018-0291-0 · Cited by 402
Li, H., Wu, D., Wu, J., Dong, L., Zhu, Y., & Hu, X. (2017) · Advanced Materials · doi:10.1002/adma.201703548 · Cited by 401
Solution combustion synthesis of metal oxide nanomaterials for energy storage and conversion
Li, F.-T., Ran, J., Jaroniec, M., & Qiao, S. Z. (2015) · Nanoscale · doi:10.1039/c5nr05299h · Cited by 400
Insitu Raman study of lithium-ion intercalation into microcrystalline graphite
Sole, C., Drewett, N. E., & Hardwick, L. J. (2014) · Faraday Discuss. · doi:10.1039/c4fd00079j · Cited by 400
Wan, M., Kang, S., Wang, L., Lee, H.-W., Zheng, G. W., Cui, Y., & Sun, Y. (2020) · Nature Communications · doi:10.1038/s41467-020-14550-3 · Cited by 397
Materials and Structures for Stretchable Energy Storage and Conversion Devices
Xie, K., & Wei, B. (2014) · Advanced Materials · doi:10.1002/adma.201305919 · Cited by 396
High-capacity battery cathode prelithiation to offset initial lithium loss
Sun, Y., Lee, H.-W., Seh, Z. W., Liu, N., Sun, J., Li, Y., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2015.8 · Cited by 396
Metadata
- Authors
- Goodenough, J. B., & Park, K.-S.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-01-18
- Volume
- 135
- Issue
- 4
- Pages
- 1167-1176
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2021172010
- Cited by
- 9,962
- References
- 40
- FWCI
- 244.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.