The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
The Li-Ion Rechargeable Battery: A Perspective
Abstract
Each cell of a battery stores electrical energy as chemical energy in two electrodes, a reductant (anode) and an oxidant (cathode), separated by an electrolyte that transfers the ionic component of the chemical reaction inside the cell and forces the electronic component outside the battery. The output on discharge is an external electronic current I at a voltage V for a time Δt. The chemical reaction of a rechargeable battery must be reversible on the application of a charging I and V. Critical parameters of a rechargeable battery are safety, density of energy that can be stored at a specific power input and retrieved at a specific power output, cycle and shelf life, storage efficiency, and cost of fabrication. Conventional ambient-temperature rechargeable batteries have solid electrodes and a liquid electrolyte. The positive electrode (cathode) consists of a host framework into which the mobile (working) cation is inserted reversibly over a finite solid-solution range. The solid-solution range, which is reduced at higher current by the rate of transfer of the working ion across electrode/electrolyte interfaces and within a host, limits the amount of charge per electrode formula unit that can be transferred over the time Δt = Δt(I). Moreover, the difference between energies of the LUMO and the HOMO of the electrolyte, i.e., electrolyte window, determines the maximum voltage for a long shelf and cycle life. The maximum stable voltage with an aqueous electrolyte is 1.5 V; the Li-ion rechargeable battery uses an organic electrolyte with a larger window, which increase the density of stored energy for a given Δt. Anode or cathode electrochemical potentials outside the electrolyte window can increase V, but they require formation of a passivating surface layer that must be permeable to Li(+) and capable of adapting rapidly to the changing electrode surface area as the electrode changes volume during cycling. A passivating surface layer adds to the impedance of the Li(+) transfer across the electrode/electrolyte interface and lowers the cycle life of a battery cell. Moreover, formation of a passivation layer on the anode robs Li from the cathode irreversibly on an initial charge, further lowering the reversible Δt. These problems plus the cost of quality control of manufacturing plague development of Li-ion rechargeable batteries that can compete with the internal combustion engine for powering electric cars and that can provide the needed low-cost storage of electrical energy generated by renewable wind and/or solar energy. Chemists are contributing to incremental improvements of the conventional strategy by investigating and controlling electrode passivation layers, improving the rate of Li(+) transfer across electrode/electrolyte interfaces, identifying electrolytes with larger windows while retaining a Li(+) conductivity σ(Li) > 10(-3) S cm(-1), synthesizing electrode morphologies that reduce the size of the active particles while pinning them on current collectors of large surface area accessible by the electrolyte, lowering the cost of cell fabrication, designing displacement-reaction anodes of higher capacity that allow a safe, fast charge, and designing alternative cathode hosts. However, new strategies are needed for batteries that go beyond powering hand-held devices, such as using electrode hosts with two-electron redox centers; replacing the cathode hosts by materials that undergo displacement reactions (e.g. sulfur) by liquid cathodes that may contain flow-through redox molecules, or by catalysts for air cathodes; and developing a Li(+) solid electrolyte separator membrane that allows an organic and aqueous liquid electrolyte on the anode and cathode sides, respectively. Opportunities exist for the chemist to bring together oxide and polymer or graphene chemistry in imaginative morphologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Self-citationA Perovskite Oxide Optimized for Oxygen Evolution Catalysis from Molecular Orbital Principles
Suntivich, J., May, K. J., Gasteiger, H. A., Goodenough, J. B., & Shao-Horn, Y. (2011) · Science · doi:10.1126/science.1212858 · Cited by 5,441
Self-citationLixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Self-citationStability of polyatomic molecules in degenerate electronic states - I—Orbital degeneracy
Jahn, H. A., & Teller, E. (1937) · Proceedings of the Royal Society of London. Series A - Mathematical and Physical Sciences · doi:10.1098/rspa.1937.0142 · Cited by 3,215
Suntivich, J., Gasteiger, H. A., Yabuuchi, N., Nakanishi, H., Goodenough, J. B., & Shao-Horn, Y. (2011) · Nature Chemistry · doi:10.1038/nchem.1069 · Cited by 2,904
Self-citationPeled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
Fast Na+-ion transport in skeleton structures
Goodenough, J. B., Hong, H. Y.-P., & Kafalas, J. A. (1976) · Materials Research Bulletin · doi:10.1016/0025-5408(76)90077-5 · Cited by 2,284
Self-citationScrosati, B., Magistris, A., Mari, C. M., & Mariotto, G. (1993) · Springer eBooks · doi:10.1007/978-94-011-1916-0 · Cited by 2,218
Electrical Energy Storage and Intercalation Chemistry
Whittingham, M. S. (1976) · Science · doi:10.1126/science.192.4244.1126 · Cited by 1,919
Cited by
Items 201–300 of 406
Rational Design of Flexible Two-Dimensional MXenes with Multiple Functionalities
Fu, Z., Wang, N., Legut, D., Si, C., Zhang, Q., Du, S., Germann, T. C., Francisco, J. S., & Zhang, R. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00348 · Cited by 396
Fast Charging Lithium Batteries: Recent Progress and Future Prospects
Zhu, G., Zhao, C., Huang, J., He, C., Zhang, J., Chen, S., Xu, L., Yuan, H., & Zhang, Q. (2019) · Small · doi:10.1002/smll.201805389 · Cited by 395
Choi, J. U., Voronina, N., Sun, Y., & Myung, S. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002027 · Cited by 394
Building Practical High‐Voltage Cathode Materials for Lithium‐Ion Batteries
Xiang, J., Wei, Y., Zhong, Y., Yang, Y., Cheng, H., Yuan, L., Xu, H., & Huang, Y. (2022) · Advanced Materials · doi:10.1002/adma.202200912 · Cited by 394
Zhao, L., Li, Y., Yu, M., Peng, Y., & Ran, F. (2023) · Advanced Science · doi:10.1002/advs.202300283 · Cited by 393
Emerging electrolytes with fluorinated solvents for rechargeable lithium-based batteries
Wang, Y., Li, Z., Hou, Y., Hao, Z., Zhang, Q., Ni, Y., Lu, Y., Yan, Z., Zhang, K., Zhao, Q., et al. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00873d · Cited by 390
Zeng, W., Wang, L., Peng, X., Liu, T., Jiang, Y., Qin, F., Hu, L., Chu, P. K., Huo, K., & Zhou, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702314 · Cited by 389
Metal-organic frameworks for energy storage devices: Batteries and supercapacitors
Mehtab, T., Yasin, G., Arif, M., Shakeel, M., Korai, R. M., Nadeem, M., Muhammad, N., & Lu, X. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2018.12.025 · Cited by 388
Zhang, X., Yu, Z., Wang, S.-S., Guan, S., Yang, H. Y., Yao, Y., & Yang, S. A. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta07065e · Cited by 387
Zhou, M., Li, B., Li, J., & Xu, Z. (2021) · ACS ES&T Engineering · doi:10.1021/acsestengg.1c00067 · Cited by 387
Qing, R., Shi, J., Xiao, D., Zhang, X., Yin, Y., Zhai, Y., Gu, L., & Guo, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501914 · Cited by 386
Jiao, S., Zheng, J., Li, Q., Li, X., Engelhard, M. H., Cao, R., Zhang, J.-G., & Xu, W. (2018) · Joule · doi:10.1016/j.joule.2017.10.007 · Cited by 386
Graphene‐Based Nanocomposites for Energy Storage
Ji, L., Meduri, P., Agubra, V., Xiao, X., & Alcoutlabi, M. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502159 · Cited by 385
Bai, Y., Muralidharan, N., Sun, Y.-K., Passerini, S., Stanley Whittingham, M., & Belharouak, I. (2020) · Materials Today · doi:10.1016/j.mattod.2020.09.001 · Cited by 385
Benchakar, M., Loupias, L., Garnero, C., Bilyk, T., Morais, C., Canaff, C., Guignard, N., Morisset, S., Pazniak, H., Hurand, S., et al. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.147209 · Cited by 384
Liu, T., Dai, A., Lu, J., Yuan, Y., Xiao, Y., Yu, L., Li, M., Gim, J., Ma, L., Liu, J., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-12626-3 · Cited by 383
A lithium anode protection guided highly-stable lithium–sulfur battery
Ma, G., Wen, Z., Wu, M., Shen, C., Wang, Q., Jin, J., & Wu, X. (2014) · Chem. Commun. · doi:10.1039/c4cc05535g · Cited by 382
Zhou, J., Wang, L., Yang, M., Wu, J., Chen, F., Huang, W., Han, N., Ye, H., Zhao, F., Li, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201702061 · Cited by 381
Senthil, C., & Lee, C. W. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110464 · Cited by 377
Graphene hybridization for energy storage applications
Li, X., & Zhi, L. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00871f · Cited by 377
Nanoparticle/MOF composites: preparations and applications
Yu, J., Mu, C., Yan, B., Qin, X., Shen, C., Xue, H., & Pang, H. (2017) · Materials Horizons · doi:10.1039/c6mh00586a · Cited by 376
M. Gür, T. (2018) · Energy & Environmental Science · doi:10.1039/c8ee90053a · Cited by 374
Recent advances in Li1+xAlxTi2−x(PO4)3 solid-state electrolyte for safe lithium batteries
Xiao, W., Wang, J., Fan, L., Zhang, J., & Li, X. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.10.012 · Cited by 374
Lithium Manganese Spinel Cathodes for Lithium‐Ion Batteries
Huang, Y., Dong, Y., Li, S., Lee, J., Wang, C., Zhu, Z., Xue, W., Li, Y., & Li, J. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000997 · Cited by 374
Heteroatom-doped carbon catalysts for zinc–air batteries: progress, mechanism, and opportunities
Zhu, X., Hu, C., Amal, R., Dai, L., & Lu, X. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02800b · Cited by 374
Wang, Q., Zou, R., Xia, W., Ma, J., Qiu, B., Mahmood, A., Zhao, R., Yang, Y., Xia, D., & Xu, Q. (2015) · Small · doi:10.1002/smll.201403579 · Cited by 370
Chen, S., Wen, K., Fan, J., Bando, Y., & Golberg, D. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta03358g · Cited by 367
Recent advances in rational design for high-performance potassium-ion batteries
Xu, Y., Du, Y., Chen, H., Chen, J., Ding, T., Sun, D., Kim, D. H., Lin, Z., & Zhou, X. (2024) · Chemical Society Reviews · doi:10.1039/d3cs00601h · Cited by 367
Manganese Oxide/Carbon Yolk–Shell Nanorod Anodes for High Capacity Lithium Batteries
Cai, Z., Xu, L., Yan, M., Han, C., He, L., Hercule, K. M., Niu, C., Yuan, Z., Xu, W., Qu, L., et al. (2015) · Nano Letters · doi:10.1021/nl504427d · Cited by 366
Solid-State Lithium Metal Batteries Promoted by Nanotechnology: Progress and Prospects
Xin, S., You, Y., Wang, S., Gao, H.-C., Yin, Y.-X., & Guo, Y.-G. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00175 · Cited by 366
Wang, X., Garnero, C., Rochard, G., Magne, D., Morisset, S., Hurand, S., Chartier, P., Rousseau, J., Cabioc'h, T., Coutanceau, C., et al. (2017) · J. Mater. Chem. A · doi:10.1039/c7ta01082f · Cited by 364
A Review on the Features and Progress of Dual‐Ion Batteries
Wang, M., & Tang, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703320 · Cited by 363
Shi, Y., Zhou, X., & Yu, G. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00402 · Cited by 361
Fast and reversible thermoresponsive polymer switching materials for safer batteries
Chen, Z., Hsu, P.-C., Lopez, J., Li, Y., To, J. W. F., Liu, N., Wang, C., Andrews, S. C., Liu, J., Cui, Y., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2015.9 · Cited by 360
Zhang, L., Zhang, G., Wu, H. B., Yu, L., & Lou, X. W. (. (2013) · Advanced Materials · doi:10.1002/adma.201300105 · Cited by 358
Schulze, M. W., McIntosh, L. D., Hillmyer, M. A., & Lodge, T. P. (2014) · Nano Letters · doi:10.1021/nl4034818 · Cited by 356
Zhu, P., Yan, C., Dirican, M., Zhu, J., Zang, J., Selvan, R. K., Chung, C.-C., Jia, H., Li, Y., Kiyak, Y., et al. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta10517g · Cited by 356
Detection of Micro-Scale Li Dendrite via H2 Gas Capture for Early Safety Warning
Jin, Y., Zheng, Z., Wei, D., Jiang, X., Lu, H., Sun, L., Tao, F., Guo, D., Liu, Y., Gao, J., et al. (2020) · Joule · doi:10.1016/j.joule.2020.05.016 · Cited by 355
Solid Electrolyte Interphases on Sodium Metal Anodes
Bao, C., Wang, B., Liu, P., Wu, H., Zhou, Y., Wang, D., Liu, H., & Dou, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202004891 · Cited by 354
2D Frameworks of C2N and C3N as New Anode Materials for Lithium‐Ion Batteries
Xu, J., Mahmood, J., Dou, Y., Dou, S., Li, F., Dai, L., & Baek, J. (2017) · Advanced Materials · doi:10.1002/adma.201702007 · Cited by 353
Xie, J., Gu, P., & Zhang, Q. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00494 · Cited by 352
Luo, J., Wang, C., Wang, H., Hu, X., Matios, E., Lu, X., Zhang, W., Tao, X., & Li, W. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805946 · Cited by 352
Li–CO2 and Na–CO2 Batteries: Toward Greener and Sustainable Electrical Energy Storage
Mu, X., Pan, H., He, P., & Zhou, H. (2020) · Advanced Materials · doi:10.1002/adma.201903790 · Cited by 352
Wang, Y., Zhang, B., Lai, W., Xu, Y., Chou, S., Liu, H., & Dou, S. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602829 · Cited by 349
Liu, J., Wang, J., Ni, Y., Zhang, K., Cheng, F., & Chen, J. (2021) · Materials Today · doi:10.1016/j.mattod.2020.10.028 · Cited by 349
Park, J., Yu, B., Park, J. S., Choi, J. W., Kim, C., Sung, Y., & Goodenough, J. B. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602567 · Cited by 348
Self-citationLi, B., Yan, H., Ma, J., Yu, P., Xia, D., Huang, W., Chu, W., & Wu, Z. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400436 · Cited by 347
Design Considerations for Unconventional Electrochemical Energy Storage Architectures
Vlad, A., Singh, N., Galande, C., & Ajayan, P. M. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402115 · Cited by 346
Wang, S., Guan, B. Y., Yu, L., & Lou, X. W. (. (2017) · Advanced Materials · doi:10.1002/adma.201702724 · Cited by 346
Santhosha, A. L., Medenbach, L., Buchheim, J. R., & Adelhelm, P. (2019) · Batteries & Supercaps · doi:10.1002/batt.201800149 · Cited by 346
A review on the recycling of spent lithium-ion batteries (LIBs) by the bioleaching approach
Roy, J. J., Cao, B., & Madhavi, S. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.130944 · Cited by 346
Zinc–air batteries: are they ready for prime time?
Zhang, J., Zhou, Q., Tang, Y., Zhang, L., & Li, Y. (2019) · Chemical Science · doi:10.1039/c9sc04221k · Cited by 344
Garnet Solid Electrolyte for Advanced All‐Solid‐State Li Batteries
Xu, L., Li, J., Deng, W., Shuai, H., Li, S., Xu, Z., Li, J., Hou, H., Peng, H., Zou, G., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000648 · Cited by 344
Nonaqueous Rechargeable Aluminum Batteries: Progresses, Challenges, and Perspectives
Tu, J., Song, W.-L., Lei, H., Yu, Z., Chen, L.-L., Wang, M., & Jiao, S. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01257 · Cited by 342
Zhao, Q., Zhu, Z., & Chen, J. (2017) · Advanced Materials · doi:10.1002/adma.201607007 · Cited by 341
Supply risks associated with lithium-ion battery materials
Helbig, C., Bradshaw, A. M., Wietschel, L., Thorenz, A., & Tuma, A. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.10.122 · Cited by 341
Ryu, W.-H., Yoon, T.-H., Song, S. H., Jeon, S., Park, Y.-J., & Kim, I.-D. (2013) · Nano Letters · doi:10.1021/nl401868q · Cited by 341
Dietrich, C., Weber, D. A., Sedlmaier, S. J., Indris, S., Culver, S. P., Walter, D., Janek, J., & Zeier, W. G. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta06067j · Cited by 338
The Recycling of Spent Lithium-Ion Batteries: a Review of Current Processes and Technologies
Li, L., Zhang, X., Li, M., Chen, R., Wu, F., Amine, K., & Lu, J. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0012-1 · Cited by 337
MXenes for Non‐Lithium‐Ion (Na, K, Ca, Mg, and Al) Batteries and Supercapacitors
Aslam, M. K., Niu, Y., & Xu, M. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000681 · Cited by 337
Xu, Y., Wei, Q., Xu, C., Li, Q., An, Q., Zhang, P., Sheng, J., Zhou, L., & Mai, L. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600389 · Cited by 335
Hybrid supercapacitor-battery materials for fast electrochemical charge storage
Vlad, A., Singh, N., Rolland, J., Melinte, S., Ajayan, P. M., & Gohy, J.-F. (2014) · Scientific Reports · doi:10.1038/srep04315 · Cited by 334
Atomic-level energy storage mechanism of cobalt hydroxide electrode for pseudocapacitors
Deng, T., Zhang, W., Arcelus, O., Kim, J.-G., Carrasco, J., Yoo, S. J., Zheng, W., Wang, J., Tian, H., Zhang, H., et al. (2017) · Nature Communications · doi:10.1038/ncomms15194 · Cited by 333
Alkali-Metal Anodes: From Lab to Market
Xiang, J., Yang, L., Yuan, L., Yuan, K., Zhang, Y., Huang, Y., Lin, J., Pan, F., & Huang, Y. (2019) · Joule · doi:10.1016/j.joule.2019.07.027 · Cited by 333
Failure mechanisms of single-crystal silicon electrodes in lithium-ion batteries
Shi, F., Song, Z., Ross, P. N., Somorjai, G. A., Ritchie, R. O., & Komvopoulos, K. (2016) · Nature Communications · doi:10.1038/ncomms11886 · Cited by 332
Battery thermal management systems: Recent progress and challenges
Olabi, A. G., Maghrabie, H. M., Adhari, O. H. K., Sayed, E. T., Yousef, B. A. A., Salameh, T., Kamil, M., & Abdelkareem, M. A. (2022) · International Journal of Thermofluids · doi:10.1016/j.ijft.2022.100171 · Cited by 332
Recent progress on transition metal oxides as advanced materials for energy conversion and storage
Yuan, S., Duan, X., Liu, J., Ye, Y., Lv, F., Liu, T., Wang, Q., & Zhang, X. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.07.007 · Cited by 329
Research Progresses of Liquid Electrolytes in Lithium‐Ion Batteries
Liu, Y., Zhao, C., Du, J., Zhang, X., Chen, A., & Zhang, Q. (2023) · Small · doi:10.1002/smll.202205315 · Cited by 328
Regulating Li deposition by constructing LiF-rich host for dendrite-free lithium metal anode
Yuan, Y., Wu, F., Bai, Y., Li, Y., Chen, G., Wang, Z., & Wu, C. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.06.022 · Cited by 327
Yang, F., Gao, H., Hao, J., Zhang, S., Li, P., Liu, Y., Chen, J., & Guo, Z. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808291 · Cited by 326
Development of solid-state electrolytes for sodium-ion battery–A short review
Wang, Y., Song, S., Xu, C., Hu, N., Molenda, J., & Lu, L. (2019) · Nano Materials Science · doi:10.1016/j.nanoms.2019.02.007 · Cited by 326
Zhao, S., Guo, Z., Yan, K., Wan, S., He, F., Sun, B., & Wang, G. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.11.008 · Cited by 325
Biomass-based materials for green lithium secondary batteries
Jin, C., Nai, J., Sheng, O., Yuan, H., Zhang, W., Tao, X., & Lou, X. W. (. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02848g · Cited by 324
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0171514jes · Cited by 323
Ionically Conductive Self‐Healing Binder for Low Cost Si Microparticles Anodes in Li‐Ion Batteries
Munaoka, T., Yan, X., Lopez, J., To, J. W. F., Park, J., Tok, J. B. ‐., Cui, Y., & Bao, Z. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703138 · Cited by 322
Chakraborty, A., Kunnikuruvan, S., Kumar, S., Markovsky, B., Aurbach, D., Dixit, M., & Major, D. T. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b04066 · Cited by 322
Xu, J., Ma, J., Fan, Q., Guo, S., & Dou, S. (2017) · Advanced Materials · doi:10.1002/adma.201606454 · Cited by 319
Li, Q., Wang, Y., Wang, X., Sun, X., Zhang, J.-N., Yu, X., & Li, H. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b16727 · Cited by 319
One-pot solution coating of high quality LiF layer to stabilize Li metal anode
Lang, J., Long, Y., Qu, J., Luo, X., Wei, H., Huang, K., Zhang, H., Qi, L., Zhang, Q., Li, Z., et al. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.04.024 · Cited by 318
Techno-Economic Challenges of Fuel Cell Commercialization
Wang, J., Wang, H., & Fan, Y. (2018) · Engineering · doi:10.1016/j.eng.2018.05.007 · Cited by 318
Fast galvanic lithium corrosion involving a Kirkendall-type mechanism
Lin, D., Liu, Y., Li, Y., Li, Y., Pei, A., Xie, J., Huang, W., & Cui, Y. (2019) · Nature Chemistry · doi:10.1038/s41557-018-0203-8 · Cited by 318
Understanding and suppression strategies toward stable Li metal anode for safe lithium batteries
Yasin, G., Arif, M., Mehtab, T., Lu, X., Yu, D., Muhammad, N., Nazir, M. T., & Song, H. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.09.020 · Cited by 317
Ionic liquids for high performance lithium metal batteries
Liu, K., Wang, Z., Shi, L., Jungsuttiwong, S., & Yuan, S. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.11.017 · Cited by 317
Beyond Insertion for Na‐Ion Batteries: Nanostructured Alloying and Conversion Anode Materials
Zhang, H., Hasa, I., & Passerini, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702582 · Cited by 316
Rechargeable Solid‐State Li–Air and Li–S Batteries: Materials, Construction, and Challenges
Liu, Y., He, P., & Zhou, H. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701602 · Cited by 315
Nazar, L. F., Cuisinier, M., & Pang, Q. (2014) · MRS Bulletin · doi:10.1557/mrs.2014.86 · Cited by 314
Solid electrolytes and interfaces in all-solid-state sodium batteries: Progress and perspective
Hou, W., Guo, X., Shen, X., Amine, K., Yu, H., & Lu, J. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.07.036 · Cited by 314
Hao, H., Hutter, T., Boyce, B. L., Watt, J., Liu, P., & Mitlin, D. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00838 · Cited by 314
Biomass-derived materials for electrochemical energy storages
Zhang, L., Liu, Z., Cui, G., & Chen, L. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.09.003 · Cited by 313
Yao, P., Zhu, B., Zhai, H., Liao, X., Zhu, Y., Xu, W., Cheng, Q., Jayyosi, C., Li, Z., Zhu, J., et al. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b01421 · Cited by 313
Recent Progress on Zinc-Ion Rechargeable Batteries
Xu, W., & Wang, Y. (2019) · Nano-Micro Letters · doi:10.1007/s40820-019-0322-9 · Cited by 312
Yao, F., Pham, D. T., & Lee, Y. H. (2015) · ChemSusChem · doi:10.1002/cssc.201403490 · Cited by 312
Yu, L., Guan, B., Xiao, W., & Lou, X. W. (. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500981 · Cited by 312
Facile synthesis of Li2S–polypyrrole composite structures for high-performance Li2S cathodes
Seh, Z. W., Wang, H., Hsu, P.-C., Zhang, Q., Li, W., Zheng, G., Yao, H., & Cui, Y. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43395a · Cited by 311
2D material as anode for sodium ion batteries: Recent progress and perspectives
Wu, Y., & Yu, Y. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.05.026 · Cited by 310
Lithium‐ and Manganese‐Rich Oxide Cathode Materials for High‐Energy Lithium Ion Batteries
Wang, J., He, X., Paillard, E., Laszczynski, N., Li, J., & Passerini, S. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600906 · Cited by 309
Dixit, M., Markovsky, B., Schipper, F., Aurbach, D., & Major, D. T. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b06122 · Cited by 309
Li, W., Sun, X., & Yu, Y. (2017) · Small Methods · doi:10.1002/smtd.201600037 · Cited by 308
Xia, A., Pu, X., Tao, Y., Liu, H., & Wang, Y. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2019.03.197 · Cited by 308
An interdisciplinary review of energy storage for communities: Challenges and perspectives
Parra, D., Swierczynski, M., Stroe, D. I., Norman, S. A., Abdon, A., Worlitschek, J., O’Doherty, T., Rodrigues, L., Gillott, M., Zhang, X., et al. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.003 · Cited by 307
Metadata
- Authors
- Goodenough, J. B., & Park, K.-S.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-01-18
- Volume
- 135
- Issue
- 4
- Pages
- 1167-1176
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2021172010
- Cited by
- 9,962
- References
- 40
- FWCI
- 244.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.