The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
The Li-Ion Rechargeable Battery: A Perspective
Abstract
Each cell of a battery stores electrical energy as chemical energy in two electrodes, a reductant (anode) and an oxidant (cathode), separated by an electrolyte that transfers the ionic component of the chemical reaction inside the cell and forces the electronic component outside the battery. The output on discharge is an external electronic current I at a voltage V for a time Δt. The chemical reaction of a rechargeable battery must be reversible on the application of a charging I and V. Critical parameters of a rechargeable battery are safety, density of energy that can be stored at a specific power input and retrieved at a specific power output, cycle and shelf life, storage efficiency, and cost of fabrication. Conventional ambient-temperature rechargeable batteries have solid electrodes and a liquid electrolyte. The positive electrode (cathode) consists of a host framework into which the mobile (working) cation is inserted reversibly over a finite solid-solution range. The solid-solution range, which is reduced at higher current by the rate of transfer of the working ion across electrode/electrolyte interfaces and within a host, limits the amount of charge per electrode formula unit that can be transferred over the time Δt = Δt(I). Moreover, the difference between energies of the LUMO and the HOMO of the electrolyte, i.e., electrolyte window, determines the maximum voltage for a long shelf and cycle life. The maximum stable voltage with an aqueous electrolyte is 1.5 V; the Li-ion rechargeable battery uses an organic electrolyte with a larger window, which increase the density of stored energy for a given Δt. Anode or cathode electrochemical potentials outside the electrolyte window can increase V, but they require formation of a passivating surface layer that must be permeable to Li(+) and capable of adapting rapidly to the changing electrode surface area as the electrode changes volume during cycling. A passivating surface layer adds to the impedance of the Li(+) transfer across the electrode/electrolyte interface and lowers the cycle life of a battery cell. Moreover, formation of a passivation layer on the anode robs Li from the cathode irreversibly on an initial charge, further lowering the reversible Δt. These problems plus the cost of quality control of manufacturing plague development of Li-ion rechargeable batteries that can compete with the internal combustion engine for powering electric cars and that can provide the needed low-cost storage of electrical energy generated by renewable wind and/or solar energy. Chemists are contributing to incremental improvements of the conventional strategy by investigating and controlling electrode passivation layers, improving the rate of Li(+) transfer across electrode/electrolyte interfaces, identifying electrolytes with larger windows while retaining a Li(+) conductivity σ(Li) > 10(-3) S cm(-1), synthesizing electrode morphologies that reduce the size of the active particles while pinning them on current collectors of large surface area accessible by the electrolyte, lowering the cost of cell fabrication, designing displacement-reaction anodes of higher capacity that allow a safe, fast charge, and designing alternative cathode hosts. However, new strategies are needed for batteries that go beyond powering hand-held devices, such as using electrode hosts with two-electron redox centers; replacing the cathode hosts by materials that undergo displacement reactions (e.g. sulfur) by liquid cathodes that may contain flow-through redox molecules, or by catalysts for air cathodes; and developing a Li(+) solid electrolyte separator membrane that allows an organic and aqueous liquid electrolyte on the anode and cathode sides, respectively. Opportunities exist for the chemist to bring together oxide and polymer or graphene chemistry in imaginative morphologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Self-citationA Perovskite Oxide Optimized for Oxygen Evolution Catalysis from Molecular Orbital Principles
Suntivich, J., May, K. J., Gasteiger, H. A., Goodenough, J. B., & Shao-Horn, Y. (2011) · Science · doi:10.1126/science.1212858 · Cited by 5,441
Self-citationLixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Self-citationStability of polyatomic molecules in degenerate electronic states - I—Orbital degeneracy
Jahn, H. A., & Teller, E. (1937) · Proceedings of the Royal Society of London. Series A - Mathematical and Physical Sciences · doi:10.1098/rspa.1937.0142 · Cited by 3,215
Suntivich, J., Gasteiger, H. A., Yabuuchi, N., Nakanishi, H., Goodenough, J. B., & Shao-Horn, Y. (2011) · Nature Chemistry · doi:10.1038/nchem.1069 · Cited by 2,904
Self-citationPeled, E. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128859 · Cited by 2,899
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
Fast Na+-ion transport in skeleton structures
Goodenough, J. B., Hong, H. Y.-P., & Kafalas, J. A. (1976) · Materials Research Bulletin · doi:10.1016/0025-5408(76)90077-5 · Cited by 2,284
Self-citationScrosati, B., Magistris, A., Mari, C. M., & Mariotto, G. (1993) · Springer eBooks · doi:10.1007/978-94-011-1916-0 · Cited by 2,218
Electrical Energy Storage and Intercalation Chemistry
Whittingham, M. S. (1976) · Science · doi:10.1126/science.192.4244.1126 · Cited by 1,919
Cited by
Items 301–400 of 406
Yolk/shell nanoparticles: classifications, synthesis, properties, and applications
Purbia, R., & Paria, S. (2015) · Nanoscale · doi:10.1039/c5nr04729c · Cited by 307
An Aqueous Symmetric Sodium‐Ion Battery with NASICON‐Structured Na3MnTi(PO4)3
Gao, H., & Goodenough, J. B. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201606508 · Cited by 307
Self-citationActivation of Sodium Storage Sites in Prussian Blue Analogues via Surface Etching
Ren, W., Qin, M., Zhu, Z., Yan, M., Li, Q., Zhang, L., Liu, D., & Mai, L. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01366 · Cited by 306
Du, M., Liao, K., Lu, Q., & Shao, Z. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00515c · Cited by 306
Electrolytes for electrochemical energy storage
Xia, L., Yu, L., Hu, D., & Chen, G. Z. (2017) · Materials Chemistry Frontiers · doi:10.1039/c6qm00169f · Cited by 305
A Fireproof, Lightweight, Polymer–Polymer Solid-State Electrolyte for Safe Lithium Batteries
Cui, Y., Wan, J., Ye, Y., Liu, K., Chou, L.-Y., & Cui, Y. (2020) · Nano Letters · doi:10.1021/acs.nanolett.9b04815 · Cited by 305
Xu, X., Zhang, Y., Sun, H., Zhou, J., Yang, F., Li, H., Chen, H., Chen, Y., Liu, Z., Qiu, Z., et al. (2021) · Advanced Electronic Materials · doi:10.1002/aelm.202000967 · Cited by 305
Huang, J., Wu, K., Xu, G., Wu, M., Dou, S., & Wu, C. (2023) · Chemical Society Reviews · doi:10.1039/d2cs01029a · Cited by 304
Yang, B., Chen, J., Lei, S., Guo, R., Li, H., Shi, S., & Yan, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702409 · Cited by 303
Single-Ion Block Copoly(ionic liquid)s as Electrolytes for All-Solid State Lithium Batteries
Porcarelli, L., Shaplov, A. S., Salsamendi, M., Nair, J. R., Vygodskii, Y. S., Mecerreyes, D., & Gerbaldi, C. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b01973 · Cited by 302
Advances in the Design of 3D‐Structured Electrode Materials for Lithium‐Metal Anodes
Park, S., Jin, H., & Yun, Y. S. (2020) · Advanced Materials · doi:10.1002/adma.202002193 · Cited by 301
Xiang, J., Zhang, Y., Zhang, B., Yuan, L., Liu, X., Cheng, Z., Yang, Y., Zhang, X., Li, Z., Shen, Y., et al. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00049g · Cited by 301
Bhatt, M. D., & O'Dwyer, C. (2015) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp05552g · Cited by 300
Functional Gels Based on Chemically Modified Graphenes
Li, C., & Shi, G. (2014) · Advanced Materials · doi:10.1002/adma.201306104 · Cited by 300
Yoon, G., Kim, H., Park, I., & Kang, K. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601519 · Cited by 299
A review on anode for lithium-sulfur batteries: Progress and prospects
Zhao, H., Deng, N., Yan, J., Kang, W., Ju, J., Ruan, Y., Wang, X., Zhuang, X., Li, Q., & Cheng, B. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.04.112 · Cited by 299
High performance lithium–sulfur batteries: advances and challenges
Xu, G., Ding, B., Pan, J., Nie, P., Shen, L., & Zhang, X. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02097a · Cited by 297
Highly Conductive, Lightweight, Low‐Tortuosity Carbon Frameworks as Ultrathick 3D Current Collectors
Chen, C., Zhang, Y., Li, Y., Kuang, Y., Song, J., Luo, W., Wang, Y., Yao, Y., Pastel, G., Xie, J., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700595 · Cited by 297
Gao, Y., Zhao, Y., Li, Y. C., Huang, Q., Mallouk, T. E., & Wang, D. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b06437 · Cited by 297
Mesoporous Prussian Blue Analogues: Template‐Free Synthesis and Sodium‐Ion Battery Applications
Yue, Y., Binder, A. J., Guo, B., Zhang, Z., Qiao, Z., Tian, C., & Dai, S. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201310679 · Cited by 296
Design, synthesis, and energy-related applications of metal sulfides
Liu, Y., Li, Y., Kang, H., Jin, T., & Jiao, L. (2016) · Materials Horizons · doi:10.1039/c6mh00075d · Cited by 296
Emanuelsson, R., Sterby, M., Strømme, M., & Sjödin, M. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b00159 · Cited by 296
Lignin derived carbon materials: current status and future trends
Zhang, W., Qiu, X., Wang, C., Zhong, L., Fu, F., Zhu, J., Zhang, Z., Qin, Y., Yang, D., & Xu, C. C. (2022) · Carbon Research · doi:10.1007/s44246-022-00009-1 · Cited by 296
Wang, X., Fan, L., Gong, D., Zhu, J., Zhang, Q., & Lu, B. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504589 · Cited by 295
Lithium ion capacitors (LICs): Development of the materials
Jagadale, A., Zhou, X., Xiong, R., Dubal, D. P., Xu, J., & Yang, S. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.02.031 · Cited by 294
Two-dimensional transition metal dichalcogenides in supercapacitors and secondary batteries
Lin, L., Lei, W., Zhang, S., Liu, Y., Wallace, G. G., & Chen, J. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.02.023 · Cited by 294
Unlocking the Energy Capabilities of Lithium Metal Electrode with Solid-State Electrolytes
Shen, Y., Zhang, Y., Han, S., Wang, J., Peng, Z., & Chen, L. (2018) · Joule · doi:10.1016/j.joule.2018.06.021 · Cited by 293
Liao, B., Li, H., Xu, M., Xing, L., Liao, Y., Ren, X., Fan, W., Yu, L., Xu, K., & Li, W. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800802 · Cited by 292
3D TiC/C Core/Shell Nanowire Skeleton for Dendrite‐Free and Long‐Life Lithium Metal Anode
Liu, S., Xia, X., Zhong, Y., Deng, S., Yao, Z., Zhang, L., Cheng, X., Wang, X., Zhang, Q., & Tu, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702322 · Cited by 292
Defect engineering on V2O3 cathode for long-cycling aqueous zinc metal batteries
Zhu, K., Wei, S., Shou, H., Shen, F., Chen, S., Zhang, P., Wang, C., Cao, Y., Guo, X., Luo, M., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-27203-w · Cited by 292
Beyond Li-ion: electrode materials for sodium- and magnesium-ion batteries
Massé, R. C., Uchaker, E., & Cao, G. (2015) · Science China Materials · doi:10.1007/s40843-015-0084-8 · Cited by 292
Hou, P., Yin, J., Ding, M., Huang, J., & Xu, X. (2017) · Small · doi:10.1002/smll.201701802 · Cited by 289
High-Mass-Loading Electrodes for Advanced Secondary Batteries and Supercapacitors
Wu, F., Liu, M., Li, Y., Feng, X., Zhang, K., Bai, Y., Wang, X., & Wu, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00093-0 · Cited by 288
Advances in Interfaces between Li Metal Anode and Electrolyte
Zhang, X., Cheng, X., & Zhang, Q. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201701097 · Cited by 287
Zeng, L., Zeng, W., Jiang, Y., Wei, X., Li, W., Yang, C., Zhu, Y., & Yu, Y. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401377 · Cited by 285
Zhang, Y., Lu, W., Cong, L., Liu, J., Sun, L., Mauger, A., Julien, C. M., Xie, H., & Liu, J. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.02.090 · Cited by 284
Shrivastav, V., Sundriyal, S., Goel, P., Kaur, H., Tuteja, S. K., Vikrant, K., Kim, K.-H., Tiwari, U. K., & Deep, A. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2019.05.006 · Cited by 284
Shin, W.-K., Cho, J., Kannan, A. G., Lee, Y.-S., & Kim, D.-W. (2016) · Scientific Reports · doi:10.1038/srep26332 · Cited by 283
Electrochemical Kinetics of Nanostructured Nb2O5Electrodes
Come, J., Augustyn, V., Kim, J. W., Rozier, P., Taberna, P.-L., Gogotsi, P., Long, J. W., Dunn, B., & Simon, P. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.040405jes · Cited by 281
Lignin-based carbon fibers: Formation, modification and potential applications
Wang, S., Bai, J., Innocent, M. T., Wang, Q., Xiang, H., Tang, J., & Zhu, M. (2022) · Green Energy & Environment · doi:10.1016/j.gee.2021.04.006 · Cited by 280
Transition metal chalcogenide anodes for sodium storage
Ali, Z., Zhang, T., Asif, M., Zhao, L., Yu, Y., & Hou, Y. (2020) · Materials Today · doi:10.1016/j.mattod.2019.11.008 · Cited by 280
Nanoscale Engineering of Heterostructured Anode Materials for Boosting Lithium‐Ion Storage
Chen, G., Yan, L., Luo, H., & Guo, S. (2016) · Advanced Materials · doi:10.1002/adma.201600164 · Cited by 279
Tuning wettability of molten lithium via a chemical strategy for lithium metal anodes
Wang, S.-H., Yue, J., Dong, W., Zuo, T.-T., Li, J.-Y., Liu, X., Zhang, X.-D., Liu, L., Shi, J.-L., Yin, Y.-X., et al. (2019) · Nature Communications · doi:10.1038/s41467-019-12938-4 · Cited by 279
Metal/Covalent‐Organic Framework Based Cathodes for Metal‐Ion Batteries
Kong, L., Liu, M., Huang, H., Xu, Y., & Bu, X. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202100172 · Cited by 278
Anode‐Free Solid‐State Lithium Batteries: A Review
Huang, W., Zhao, C., Wu, P., Yuan, H., Feng, W., Liu, Z., Lu, Y., Sun, S., Fu, Z., Hu, J., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201044 · Cited by 278
Yu, L., Zhang, L., Wu, H. B., Zhang, G., & Lou, X. W. (. (2013) · Energy Environ. Sci. · doi:10.1039/c3ee41181h · Cited by 277
Entwistle, J., Rennie, A., & Patwardhan, S. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta06370b · Cited by 277
Ren, W., Zheng, Z., Xu, C., Niu, C., Wei, Q., An, Q., Zhao, K., Yan, M., Qin, M., & Mai, L. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.03.018 · Cited by 275
Li, L., Liu, W., Dong, H., Gui, Q., Hu, Z., Li, Y., & Liu, J. (2021) · Advanced Materials · doi:10.1002/adma.202004959 · Cited by 275
An advance review of solid-state battery: Challenges, progress and prospects
Li, C., Wang, Z.-Y., He, Z.-J., Li, Y.-J., Mao, J., Dai, K.-H., Yan, C., & Zheng, J.-C. (2021) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2021.e00297 · Cited by 273
Liang, Y., Liu, H., Wang, G., Wang, C., Ni, Y., Nan, C., & Fan, L. (2022) · InfoMat · doi:10.1002/inf2.12292 · Cited by 273
Lithium-Ion Batteries—The Crux of Electric Vehicles with Opportunities and Challenges
S. Rangarajan, S., Sunddararaj, S. P., Sudhakar, A., Shiva, C. K., Subramaniam, U., Collins, E. R., & Senjyu, T. (2022) · Clean Technologies · doi:10.3390/cleantechnol4040056 · Cited by 273
Advanced cobalt-free cathode materials for sodium-ion batteries
Chu, S., Guo, S., & Zhou, H. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00442e · Cited by 272
Lignin-based electrodes for energy storage application
Liu, H., Xu, T., Liu, K., Zhang, M., Liu, W., Li, H., Du, H., & Si, C. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.113425 · Cited by 271
Boaretto, N., Garbayo, I., Valiyaveettil-SobhanRaj, S., Quintela, A., Li, C., Casas-Cabanas, M., & Aguesse, F. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229919 · Cited by 271
Rechargeable Batteries: Grasping for the Limits of Chemistry
Berg, E. J., Villevieille, C., Streich, D., Trabesinger, S., & Novák, P. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0081514jes · Cited by 270
Dimethyl carbonate as a green chemical
Pyo, S.-H., Park, J. H., Chang, T.-S., & Hatti-Kaul, R. (2017) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2017.03.012 · Cited by 270
A review on the stability and surface modification of layered transition-metal oxide cathodes
Kim, J.-M., Zhang, X., Zhang, J.-G., Manthiram, A., Meng, Y. S., & Xu, W. (2021) · Materials Today · doi:10.1016/j.mattod.2020.12.017 · Cited by 270
Cobalt‐Free High‐Capacity Ni‐Rich Layered Li[Ni0.9Mn0.1]O2 Cathode
Aishova, A., Park, G., Yoon, C. S., & Sun, Y. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903179 · Cited by 269
Cyclic Voltammetry in Lithium–Sulfur Batteries—Challenges and Opportunities
Huang, X., Wang, Z., Knibbe, R., Luo, B., Ahad, S. A., Sun, D., & Wang, L. (2019) · Energy Technology · doi:10.1002/ente.201801001 · Cited by 269
de Biasi, L., Schiele, A., Roca‐Ayats, M., Garcia, G., Brezesinski, T., Hartmann, P., & Janek, J. (2019) · ChemSusChem · doi:10.1002/cssc.201900032 · Cited by 269
Zuo, W., Zhu, W., Zhao, D., Sun, Y., Li, Y., Liu, J., & Lou, X. W. (. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01871h · Cited by 267
Kim, J., Park, S., Hwang, S., & Yoon, W.-S. (2022) · Journal of Electrochemical Science and Technology · doi:10.33961/jecst.2021.00836 · Cited by 267
Engineering Strategies for Suppressing the Shuttle Effect in Lithium–Sulfur Batteries
Li, J., Gao, L., Pan, F., Gong, C., Sun, L., Gao, H., Zhang, J., Zhao, Y., Wang, G., & Liu, H. (2024) · Nano-Micro Letters · doi:10.1007/s40820-023-01223-1 · Cited by 267
Huang, B., Li, X., Pei, Y., Li, S., Cao, X., Massé, R. C., & Cao, G. (2016) · Small · doi:10.1002/smll.201503419 · Cited by 267
A Novel Tin‐Graphite Dual‐Ion Battery Based on Sodium‐Ion Electrolyte with High Energy Density
Sheng, M., Zhang, F., Ji, B., Tong, X., & Tang, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601963 · Cited by 266
ZIF-67-Derived N-Doped Co/C Nanocubes as High-Performance Anode Materials for Lithium-Ion Batteries
Wang, L., Wang, Z., Xie, L., Zhu, L., & Cao, X. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b03365 · Cited by 265
Al Zoubi, W., Kamil, M. P., Fatimah, S., Nashrah, N., & Ko, Y. G. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100663 · Cited by 265
Zhang, L., Du, W., Nautiyal, A., Liu, Z., & Zhang, X. (2018) · Science China Materials · doi:10.1007/s40843-017-9206-4 · Cited by 262
Liu, Y., Dai, H., Wu, L., Zhou, W., He, L., Wang, W., Yan, W., Huang, Q., Fu, L., & Wu, Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901379 · Cited by 261
Micro/Nanostructured Materials for Sodium Ion Batteries and Capacitors
Li, F., & Zhou, Z. (2018) · Small · doi:10.1002/smll.201702961 · Cited by 259
Lithium Batteries for Electric Vehicles: From Economy to Research Strategy
Eftekhari, A. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01494 · Cited by 259
Xiao, B., Li, Y.-C., Yu, X.-F., & Cheng, J.-B. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12727 · Cited by 258
Zhang, J., Zheng, C., Li, L., Xia, Y., Huang, H., Gan, Y., Liang, C., He, X., Tao, X., & Zhang, W. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201903311 · Cited by 257
Cobalt oxide-based nanoarchitectures for electrochemical energy applications
Mei, J., Liao, T., Ayoko, G. A., Bell, J., & Sun, Z. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.03.001 · Cited by 256
Circumventing huge volume strain in alloy anodes of lithium batteries
Li, H., Yamaguchi, T., Matsumoto, S., Hoshikawa, H., Kumagai, T., Okamoto, N. L., & Ichitsubo, T. (2020) · Nature Communications · doi:10.1038/s41467-020-15452-0 · Cited by 256
Recent progress on electrolyte additives for stable lithium metal anode
Li, S., Luo, Z., Li, L., Hu, J., Zou, G., Hou, H., & Ji, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.07.008 · Cited by 256
Integrating Bi@C Nanospheres in Porous Hard Carbon Frameworks for Ultrafast Sodium Storage
Liang, Y., Song, N., Zhang, Z., Chen, W., Feng, J., Xi, B., & Xiong, S. (2022) · Advanced Materials · doi:10.1002/adma.202202673 · Cited by 256
Polymer electrolytes and interfaces toward solid-state batteries: Recent advances and prospects
Wu, F., Zhang, K., Liu, Y., Gao, H., Bai, Y., Wang, X., & Wu, C. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.08.002 · Cited by 255
High‐Voltage Zinc‐Ion Batteries: Design Strategies and Challenges
Yan, J., Ang, E. H., Yang, Y., Zhang, Y., Ye, M., Du, W., & Li, C. C. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010213 · Cited by 255
On the Road to the Frontiers of Lithium‐Ion Batteries: A Review and Outlook of Graphene Anodes
Bi, J., Du, Z., Sun, J., Liu, Y., Wang, K., Du, H., Ai, W., & Huang, W. (2023) · Advanced Materials · doi:10.1002/adma.202210734 · Cited by 255
The significance of mitigating crosstalk in lithium-ion batteries: a review
Song, Y., Wang, L., Sheng, L., Ren, D., Liang, H., Li, Y., Wang, A., Zhang, H., Xu, H., & He, X. (2023) · Energy & Environmental Science · doi:10.1039/d3ee00441d · Cited by 255
A Review of Lithium-Ion Battery Recycling: Technologies, Sustainability, and Open Issues
Zanoletti, A., Carena, E., Ferrara, C., & Bontempi, E. (2024) · Batteries · doi:10.3390/batteries10010038 · Cited by 255
Fluorine Chemistry in Rechargeable Batteries: Challenges, Progress, and Perspectives
Wang, Y., Yang, X., Meng, Y., Wen, Z., Han, R., Hu, X., Sun, B., Kang, F., Li, B., Zhou, D., et al. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00826 · Cited by 255
Li, M., Carter, R., Douglas, A., Oakes, L., & Pint, C. L. (2017) · ACS Nano · doi:10.1021/acsnano.7b01437 · Cited by 254
Recent research trends in Li–S batteries
Kumar, R., Liu, J., Hwang, J.-Y., & Sun, Y.-K. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta01483c · Cited by 254
Heterointerface effects in the electrointercalation of van der Waals heterostructures
Bediako, D. K., Rezaee, M., Yoo, H., Larson, D. T., Zhao, S. Y. F., Taniguchi, T., Watanabe, K., Brower-Thomas, T. L., Kaxiras, E., & Kim, P. (2018) · Nature · doi:10.1038/s41586-018-0205-0 · Cited by 254
A fluoroxalate cathode material for potassium-ion batteries with ultra-long cyclability
Ji, B., Yao, W., Zheng, Y., Kidkhunthod, P., Zhou, X., Tunmee, S., Sattayaporn, S., Cheng, H.-M., He, H., & Tang, Y. (2020) · Nature Communications · doi:10.1038/s41467-020-15044-y · Cited by 254
A Dynamic, Electrolyte-Blocking, and Single-Ion-Conductive Network for Stable Lithium-Metal Anodes
Yu, Z., Mackanic, D. G., Michaels, W., Lee, M., Pei, A., Feng, D., Zhang, Q., Tsao, Y., Amanchukwu, C. V., Yan, X., et al. (2019) · Joule · doi:10.1016/j.joule.2019.07.025 · Cited by 253
Ye, J., Li, P., Zhang, H., Song, Z., Fan, T., Zhang, W., Tian, J., Huang, T., Qian, Y., Hou, Z., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202305659 · Cited by 253
Challenges for sustainable lithium supply: A critical review
Alessia, A., Alessandro, B., Maria, V.-G., Carlos, V.-A., & Francesca, B. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.126954 · Cited by 235
Tagliaferri, C., Evangelisti, S., Acconcia, F., Domenech, T., Ekins, P., Barletta, D., & Lettieri, P. (2016) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2016.07.003 · Cited by 228
Ladpli, P., Kopsaftopoulos, F., & Chang, F.-K. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.056 · Cited by 214
Zhang, W., Sun, X., Tang, Y., Xia, H., Zeng, Y., Qiao, L., Zhu, Z., Lv, Z., Zhang, Y., Ge, X., et al. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b05531 · Cited by 201
Shi, J., Ehteshami, N., Ma, J., Zhang, H., Liu, H., Zhang, X., Li, J., & Paillard, E. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.04.113 · Cited by 147
Liu, X., Shen, X., Li, H., Li, P., Luo, L., Fan, H., Feng, X., Chen, W., Ai, X., Yang, H., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003905 · Cited by 146
Li, L., Zhang, J., Wang, Y., Zaman, F. U., Zhang, Y., Hou, L., & Yuan, C. (2021) · InfoMat · doi:10.1002/inf2.12218 · Cited by 92
Sanoja, G. E., Popere, B. C., Beckingham, B. S., Evans, C. M., Lynd, N. A., & Segalman, R. A. (2016) · Macromolecules · doi:10.1021/acs.macromol.5b02614 · Cited by 49
Carbonate Free Electrolyte for Lithium Ion Batteries Containing γ-Butyrolactone and Methyl Butyrate
Lazar, M. L., & Lucht, B. L. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0601506jes · Cited by 47
Edström, K., Dominko, R., Fichtner, M., & Perraud, S. (2020) · doi:10.33063/diva2-1452023 · Cited by 46
Metadata
- Authors
- Goodenough, J. B., & Park, K.-S.
- Venue
- Journal of the American Chemical Society
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-01-18
- Volume
- 135
- Issue
- 4
- Pages
- 1167-1176
- ISSN
- 0002-7863 (ISSN-L)
- 1520-5126
- OpenAlex
- W2021172010
- Cited by
- 9,962
- References
- 40
- FWCI
- 244.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.