The DOI matches its Crossref record; 121 of the 121 references it cites were found in a registry or an index.
3D printed electrochemical energy storage devices
Abstract
Recent progress in 3D printing of electrochemical energy storage devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Carbon-Based Supercapacitors Produced by Activation of Graphene
Zhu, Y., Murali, S., Stoller, M. D., Ganesh, K. J., Cai, W., Ferreira, P. J., Pirkle, A., Wallace, R. M., Cychosz, K. A., Thommes, M., et al. (2011) · Science · doi:10.1126/science.1200770 · Cited by 6,140
Electrochemical Energy Storage for Green Grid
Yang, Z., Zhang, J., Kintner-Meyer, M. C. W., Lu, X., Choi, D., Lemmon, J. P., & Liu, J. (2011) · Chemical Reviews · doi:10.1021/cr100290v · Cited by 5,250
Lithium Batteries: Status, Prospects and Future
Scrosati, B., & Garche, J. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.048 · Cited by 5,153
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
3D printing of polymer matrix composites: A review and prospective
Wang, X., Jiang, M., Zhou, Z., Gou, J., & Hui, D. (2017) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.11.034 · Cited by 3,325
Carbon materials for chemical capacitive energy storage
Zhai, Y., Dou, Y., Zhao, D., Fulvio, P. F., Mayes, R. T., & Dai, S. (2011) · Advanced Materials · doi:10.1002/adma.201100984 · Cited by 2,964
Laser-induced porous graphene films from commercial polymers
Lin, J., Peng, Z., Liu, Y., Ruiz-Zepeda, F., Ye, R., Samuel, E. L. G., Yacaman, M. J., Yakobson, B. I., & Tour, J. M. (2014) · Nature Communications · doi:10.1038/ncomms6714 · Cited by 2,946
Supercapacitor Devices Based on Graphene Materials
Wang, Y., Shi, Z., Huang, Y., Ma, Y., Wang, C., Chen, M., & Chen, Y. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp902214f · Cited by 2,563
Residual stresses in selective laser sintering and selective laser melting
Mercelis, P., & Kruth, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610707013 · Cited by 2,015
Graphene/metal oxide composite electrode materials for energy storage
Wu, Z.-S., Zhou, G., Yin, L.-C., Ren, W., Li, F., & Cheng, H.-M. (2012) · Nano Energy · doi:10.1016/j.nanoen.2011.11.001 · Cited by 1,836
Recent advances in 3D printing of biomaterials
Chia, H. N., & Wu, B. M. (2015) · Journal of Biological Engineering · doi:10.1186/s13036-015-0001-4 · Cited by 1,734
Recent advances in all-solid-state rechargeable lithium batteries
Sun, C., Liu, J., Gong, Y., Wilkinson, D. P., & Zhang, J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.028 · Cited by 1,688
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
Xu, J., Wang, K., Zu, S.-Z., Han, B.-H., & Wei, Z. (2010) · ACS Nano · doi:10.1021/nn1006539 · Cited by 1,383
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Graphene-based nanomaterials for energy storage
Pumera, M. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00295j · Cited by 1,293
3D-printing technologies for electrochemical applications
Ambrosi, A., & Pumera, M. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00714c · Cited by 1,040
Recent Advances in Layered Ti3C2Tx MXene for Electrochemical Energy Storage
Xiong, D., Li, X., Bai, Z., & Lu, S. (2018) · Small · doi:10.1002/smll.201703419 · Cited by 1,006
Three‐Dimensional Battery Architectures
Long, J. W., Dunn, B., Rolison, D. R., & White, H. S. (2004) · ChemInform · doi:10.1002/chin.200451264 · Cited by 999
3D Printing of Free Standing Liquid Metal Microstructures
Ladd, C., So, J., Muth, J., & Dickey, M. D. (2013) · Advanced Materials · doi:10.1002/adma.201301400 · Cited by 926
Multiscale metallic metamaterials
Zheng, X., Smith, W., Jackson, J., Moran, B., Cui, H., Chen, D., Ye, J., Fang, N., Rodriguez, N., Weisgraber, T., et al. (2016) · Nature Materials · doi:10.1038/nmat4694 · Cited by 870
Mixed Metal Sulfides for Electrochemical Energy Storage and Conversion
Yu, X. Y., & (David) Lou, X. W. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701592 · Cited by 833
Direct Ink Writing of Three‐Dimensional Ceramic Structures
Lewis, J. A., Smay, J. E., Stuecker, J., & Cesarano, J. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01382.x · Cited by 823
Beidaghi, M., & Wang, C. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201201292 · Cited by 812
Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries
Fu, K., Wang, Y., Yan, C., Yao, Y., Chen, Y., Dai, J., Lacey, S., Wang, Y., Wan, J., Li, T., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505391 · Cited by 758
Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores
Zhu, C., Liu, T., Qian, F., Han, T. Y.-J., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., Worsley, M. A., & Li, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04965 · Cited by 720
Hybrid 3D Printing of Soft Electronics
Valentine, A. D., Busbee, T. A., Boley, J. W., Raney, J. R., Chortos, A., Kotikian, A., Berrigan, J. D., Durstock, M. F., & Lewis, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201703817 · Cited by 688
Synthesis of Two‐Dimensional Materials for Capacitive Energy Storage
Mendoza‐Sánchez, B., & Gogotsi, Y. (2016) · Advanced Materials · doi:10.1002/adma.201506133 · Cited by 672
Preparation of 2D material dispersions and their applications
Cai, X., Luo, Y., Liu, B., & Cheng, H.-M. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00254a · Cited by 665
Supercapacitors Using Single-Walled Carbon Nanotube Electrodes
An, K. H., Kim, W. S., Park, Y. S., Choi, Y. C., Lee, S. M., Chung, D. C., Bae, D. J., Lim, S. C., & Lee, Y. H. (2001) · Advanced Materials · doi:10.1002/1521-4095(200104)13:7<497::aid-adma497>3.0.co;2-h · Cited by 651
Stamping of Flexible, Coplanar Micro‐Supercapacitors Using MXene Inks
Zhang, C. (., Kremer, M. P., Seral‐Ascaso, A., Park, S., McEvoy, N., Anasori, B., Gogotsi, Y., & Nicolosi, V. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705506 · Cited by 637
Cakici, M., Kakarla, R. R., & Alonso-Marroquin, F. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.10.012 · Cited by 616
Supercapacitors based on nanostructured carbon
Li, X., & Wei, B. (2013) · Nano Energy · doi:10.1016/j.nanoen.2012.09.008 · Cited by 579
Engineering of MnO2-based nanocomposites for high-performance supercapacitors
Wang, J.-G., Kang, F., & Wei, B. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.04.003 · Cited by 568
Zhao, M.-Q., Liu, X.-F., Zhang, Q., Tian, G.-L., Huang, J.-Q., Zhu, W., & Wei, F. (2012) · ACS Nano · doi:10.1021/nn304037d · Cited by 553
3D Printing of Graphene Aerogels
Zhang, Q., Zhang, F., Medarametla, S. P., Li, H., Zhou, C., & Lin, D. (2016) · Small · doi:10.1002/smll.201503524 · Cited by 532
Efficient Inkjet Printing of Graphene
Li, J., Ye, F., Vaziri, S., Muhammed, M., Lemme, M. C., & Östling, M. (2013) · Advanced Materials · doi:10.1002/adma.201300361 · Cited by 505
Duy, L. X., Peng, Z., Li, Y., Zhang, J., Ji, Y., & Tour, J. M. (2018) · Carbon · doi:10.1016/j.carbon.2017.10.036 · Cited by 503
3D printing technologies for electrochemical energy storage
Zhang, F., Wei, M., Viswanathan, V. V., Swart, B., Shao, Y., Wu, G., & Zhou, C. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.037 · Cited by 494
Facilitated Ion Transport in All-Solid-State Flexible Supercapacitors
Choi, B. G., Hong, J., Hong, W. H., Hammond, P. T., & Park, H. (2011) · ACS Nano · doi:10.1021/nn202020w · Cited by 485
3D Printable Graphene Composite
Wei, X., Li, D., Jiang, W., Gu, Z., Wang, X., Zhang, Z., & Sun, Z. (2015) · Scientific Reports · doi:10.1038/srep11181 · Cited by 481
Elaboration of a microstructured inkjet-printed carbon electrochemical capacitor
Pech, D., Brunet, M., Taberna, P.-L., Simon, P., Fabre, N., Mesnilgrente, F., Conédéra, V., & Durou, H. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.08.085 · Cited by 477
Progress in 3D Printing of Carbon Materials for Energy‐Related Applications
Fu, K., Yao, Y., Dai, J., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201603486 · Cited by 475
3D Printed Graphene Based Energy Storage Devices
Foster, C. W., Down, M. P., Zhang, Y., Ji, X., Rowley-Neale, S. J., Smith, G. C., Kelly, P. J., & Banks, C. E. (2017) · Scientific Reports · doi:10.1038/srep42233 · Cited by 471
Advanced Materials for Printed Wearable Electrochemical Devices: A Review
Kim, J., Kumar, R., Bandodkar, A. J., & Wang, J. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201600260 · Cited by 452
All-inkjet-printed, solid-state flexible supercapacitors on paper
Choi, K.-H., Yoo, J., Lee, C. K., & Lee, S.-Y. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00966b · Cited by 449
Chen, P., Chen, H., Qiu, J., & Zhou, C. (2010) · Nano Research · doi:10.1007/s12274-010-0020-x · Cited by 435
3D Printing of Customized Li‐Ion Batteries with Thick Electrodes
Wei, T., Ahn, B. Y., Grotto, J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201703027 · Cited by 434
Le, L. T., Ervin, M. H., Qiu, H., Fuchs, B. E., & Lee, W. Y. (2011) · Electrochemistry Communications · doi:10.1016/j.elecom.2011.01.023 · Cited by 420
Emerging 3D‐Printed Electrochemical Energy Storage Devices: A Critical Review
Tian, X., Jin, J., Yuan, S., Chua, C. K., Tor, S. B., & Zhou, K. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700127 · Cited by 407
3D printed functional nanomaterials for electrochemical energy storage
Zhu, C., Liu, T., Qian, F., Chen, W., Chandrasekaran, S., Yao, B., Song, Y., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., et al. (2017) · Nano Today · doi:10.1016/j.nantod.2017.06.007 · Cited by 394
Wang, J.-G., Liu, H., Sun, H., Hua, W., Wang, H., Liu, X., & Wei, B. (2018) · Carbon · doi:10.1016/j.carbon.2017.10.084 · Cited by 394
An All‐Solid‐State Flexible Micro‐supercapacitor on a Chip
Wang, K., Zou, W., Quan, B., Yu, A., Wu, H., Jiang, P., & Wei, Z. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100488 · Cited by 379
3D Optical Printing of Piezoelectric Nanoparticle–Polymer Composite Materials
Kim, K., Zhu, W., Qu, X., Aaronson, C., McCall, W. R., Chen, S., & Sirbuly, D. J. (2014) · ACS Nano · doi:10.1021/nn503268f · Cited by 374
3D‐Printed All‐Fiber Li‐Ion Battery toward Wearable Energy Storage
Wang, Y., Chen, C., Xie, H., Gao, T., Yao, Y., Pastel, G., Han, X., Li, Y., Zhao, J., Fu, K. (., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201703140 · Cited by 374
Direct 3D Printing of Ultralight Graphene Oxide Aerogel Microlattices
Jiang, Y., Xu, Z., Huang, T., Liu, Y., Guo, F., Xi, J., Gao, W., & Gao, C. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707024 · Cited by 370
Graphene oxide dispersions: tuning rheology to enable fabrication
Naficy, S., Jalili, R., Aboutalebi, S. H., Gorkin III, R. A., Konstantinov, K., Innis, P. C., Spinks, G. M., Poulin, P., & Wallace, G. G. (2014) · Mater. Horiz. · doi:10.1039/c3mh00144j · Cited by 368
3D‐Printing Electrolytes for Solid‐State Batteries
McOwen, D. W., Xu, S., Gong, Y., Wen, Y., Godbey, G. L., Gritton, J. E., Hamann, T. R., Dai, J., Hitz, G. T., Hu, L., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707132 · Cited by 352
Microfluidization of Graphite and Formulation of Graphene-Based Conductive Inks
Karagiannidis, P. G., Hodge, S. A., Lombardi, L., Tomarchio, F., Decorde, N., Milana, S., Goykhman, I., Su, Y., Mesite, S. V., Johnstone, D. N., et al. (2017) · ACS Nano · doi:10.1021/acsnano.6b07735 · Cited by 348
Chi, K., Zhang, Z., Xi, J., Huang, Y., Xiao, F., Wang, S., & Liu, Y. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am504539k · Cited by 339
Zekoll, S., Marriner-Edwards, C., Hekselman, A. K. O., Kasemchainan, J., Kuss, C., Armstrong, D. E. J., Cai, D., Wallace, R. J., Richter, F. H., Thijssen, J. H. J., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02723k · Cited by 338
Fabrication of highly conductive graphene flexible circuits by 3D printing
Zhang, D., Chi, B., Li, B., Gao, Z., Du, Y., Guo, J., & Wei, J. (2016) · Synthetic Metals · doi:10.1016/j.synthmet.2016.03.014 · Cited by 336
Scalable Fabrication and Integration of Graphene Microsupercapacitors through Full Inkjet Printing
Li, J., Sollami Delekta, S., Zhang, P., Yang, S., Lohe, M. R., Zhuang, X., Feng, X., & Östling, M. (2017) · ACS Nano · doi:10.1021/acsnano.7b03354 · Cited by 334
Challenges and issues facing lithium metal for solid-state rechargeable batteries
Mauger, A., Armand, M. B., Julien, C. M., & Zaghib, K. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.04.018 · Cited by 333
Extrusion‐Based 3D Printing of Hierarchically Porous Advanced Battery Electrodes
Lacey, S. D., Kirsch, D. J., Li, Y., Morgenstern, J. T., Zarket, B. C., Yao, Y., Dai, J., Garcia, L. Q., Liu, B., Gao, T., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705651 · Cited by 332
Laser-assisted direct ink writing of planar and 3D metal architectures
Skylar-Scott, M. A., Gunasekaran, S., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1525131113 · Cited by 318
3D printing for chemical, pharmaceutical and biological applications
Capel, A. J., Rimington, R. P., Lewis, M. P., & Christie, S. D. R. (2018) · Nature Reviews Chemistry · doi:10.1038/s41570-018-0058-y · Cited by 312
Ruiz-Morales, J. C., Tarancón, A., Canales-Vázquez, J., Méndez-Ramos, J., Hernández-Afonso, L., Acosta-Mora, P., Marín Rueda, J. R., & Fernández-González, R. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03526d · Cited by 299
Additive Manufacturing: Unlocking the Evolution of Energy Materials
Zhakeyev, A., Wang, P., Zhang, L., Shu, W., Wang, H., & Xuan, J. (2017) · Advanced Science · doi:10.1002/advs.201700187 · Cited by 291
Generalized 3D Printing of Graphene-Based Mixed-Dimensional Hybrid Aerogels
Tang, X., Zhou, H., Cai, Z., Cheng, D., He, P., Xie, P., Zhang, D., & Fan, T. (2018) · ACS Nano · doi:10.1021/acsnano.8b00304 · Cited by 290
Ecosystem Disturbance, Carbon, and Climate
Running, S. W. (2008) · Science · doi:10.1126/science.1159607 · Cited by 278
3D-Printed Graphene/Polylactic Acid Electrodes Promise High Sensitivity in Electroanalysis
Manzanares Palenzuela, C. L., Novotný, F., Krupička, P., Sofer, Z., & Pumera, M. (2018) · Analytical Chemistry · doi:10.1021/acs.analchem.8b00083 · Cited by 275
Gao, J., Li, L., Tan, J., Sun, H., Li, B., Idrobo, J. C., Singh, C. V., Lu, T.-M., & Koratkar, N. (2016) · Nano Letters · doi:10.1021/acs.nanolett.6b01180 · Cited by 268
3D Printing of Reduced Graphene Oxide Nanowires
Kim, J. H., Chang, W. S., Kim, D., Yang, J. R., Han, J. T., Lee, G., Kim, J. T., & Seol, S. K. (2015) · Advanced Materials · doi:10.1002/adma.201404380 · Cited by 258
Laminated Object Manufacturing of 3D‐Printed Laser‐Induced Graphene Foams
Luong, D. X., Subramanian, A. K., Silva, G. A. L., Yoon, J., Cofer, S., Yang, K., Owuor, P. S., Wang, T., Wang, Z., Lou, J., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707416 · Cited by 257
3D Printing Sulfur Copolymer‐Graphene Architectures for Li‐S Batteries
Shen, K., Mei, H., Li, B., Ding, J., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701527 · Cited by 256
Self-citation3D Printing of Carbon Nanotubes-Based Microsupercapacitors
Yu, W., Zhou, H., Li, B. Q., & Ding, S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13904 · Cited by 227
The Emerging Frontiers and Applications of High-Resolution 3D Printing
Mao, M., He, J., Li, X., Zhang, B., Lei, Q., Liu, Y., & Li, D. (2017) · Micromachines · doi:10.3390/mi8040113 · Cited by 224
3D direct writing fabrication of electrodes for electrochemical storage devices
Wei, M., Zhang, F., Wang, W., Alexandridis, P., Zhou, C., & Wu, G. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.04.042 · Cited by 220
Blake, A. J., Kohlmeyer, R. R., Hardin, J. O., Carmona, E. A., Maruyama, B., Berrigan, J. D., Huang, H., & Durstock, M. F. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602920 · Cited by 217
Inkjet-printed energy storage device using graphene/polyaniline inks
Xu, Y., Hennig, I., Freyberg, D., James Strudwick, A., Georg Schwab, M., Weitz, T., & Chih-Pei Cha, K. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.096 · Cited by 214
Helical 3D‐Printed Metal Electrodes as Custom‐Shaped 3D Platform for Electrochemical Devices
Ambrosi, A., Moo, J. G. S., & Pumera, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201503902 · Cited by 214
Hu, J., Jiang, Y., Cui, S., Duan, Y., Liu, T., Guo, H., Lin, L., Lin, Y., Zheng, J., Amine, K., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600856 · Cited by 214
Three dimensional (3D) printed electrodes for interdigitated supercapacitors
Zhao, C., Wang, C., Gorkin, R., Beirne, S., Shu, K., & Wallace, G. G. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.01.013 · Cited by 213
Three-Dimensional Printed Electrode and Its Novel Applications in Electronic Devices
Foo, C. Y., Lim, H. N., Mahdi, M. A., Wahid, M. H., & Huang, N. M. (2018) · Scientific Reports · doi:10.1038/s41598-018-25861-3 · Cited by 213
Wang, Z., Zhang, Q., Long, S., Luo, Y., Yu, P., Tan, Z., Bai, J., Qu, B., Yang, Y., Shi, J., et al. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19635 · Cited by 212
Hu, L., Wu, H., & Cui, Y. (2010) · Applied Physics Letters · doi:10.1063/1.3425767 · Cited by 196
Wu, Q., Wei, J., Xu, B., Liu, X., Wang, H., Wang, W., Wang, Q., & Liu, W. (2017) · Scientific Reports · doi:10.1038/srep41566 · Cited by 192
Rocha, V. G., García-Tuñón, E., Botas, C., Markoulidis, F., Feilden, E., D’Elia, E., Ni, N., Shaffer, M., & Saiz, E. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10285 · Cited by 191
Materials chemistry toward electrochemical energy storage
Chen, K., & Xue, D. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta01527a · Cited by 190
Pang, H., Zhang, Y., Lai, W.-Y., Hu, Z., & Huang, W. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.04.034 · Cited by 188
Choi, K.-H., Ahn, D. B., & Lee, S.-Y. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01086 · Cited by 179
Singh, N., Galande, C., Miranda, A., Mathkar, A., Gao, W., Reddy, A. L. M., Vlad, A., & Ajayan, P. M. (2012) · Scientific Reports · doi:10.1038/srep00481 · Cited by 167
Yang, Y., Chen, Z., Song, X., Zhu, B., Hsiai, T., Wu, P.-I., Xiong, R., Shi, J., Chen, Y., Zhou, Q., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.045 · Cited by 166
A Wireless Triboelectric Nanogenerator
Mallineni, S. S. K., Dong, Y., Behlow, H. W., Rao, A. M., & Podila, R. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201702736 · Cited by 157
A hybrid three-dimensionally structured electrode for lithium-ion batteries via 3D printing
Li, J., Leu, M. C., Panat, R. P., & Park, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.01.088 · Cited by 150
Wang, S., Liu, N., Tao, J., Yang, C., Liu, W., Shi, Y., Wang, Y., Su, J., Li, L., & Gao, Y. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta05625f · Cited by 149
Pristine Graphene Aerogels by Room‐Temperature Freeze Gelation
Lin, Y., Liu, F., Casano, G., Bhavsar, R. S., Kinloch, I. A., & Derby, B. (2016) · Advanced Materials · doi:10.1002/adma.201602393 · Cited by 148
Three-Dimensional Printing of Highly Conductive Carbon Nanotube Microarchitectures with Fluid Ink
Kim, J.-H., Lee, S., Wajahat, M., Jeong, H., Chang, W. S., Jeong, H. J., Yang, J., Kim, J. T., & Seol, S. K. (2016) · ACS Nano · doi:10.1021/acsnano.6b04771 · Cited by 147
Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes
Azhari, A., Marzbanrad, E., Yilman, D., Toyserkani, E., & Pope, M. A. (2017) · Carbon · doi:10.1016/j.carbon.2017.04.028 · Cited by 146
Toward fast and cost-effective ink-jet printing of solid electrolyte for lithium microbatteries
Delannoy, P.-E., Riou, B., Lestriez, B., Guyomard, D., Brousse, T., & Bideau, J. L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.164 · Cited by 131
Inkjet-Printed Flexible Graphene-Based Supercapacitor
Ervin, M. H., Le, L. T. M., & Lee, W. Y. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.10.006 · Cited by 107
Printing nanostructured carbon for energy storage and conversion applications
Lawes, S., Riese, A., Sun, Q., et al. (2015) · Carbon · doi:10.1016/j.carbon.2015.04.008 · Cited by 105
3D-Printed Hierarchical Porous Frameworks for Sodium Storage
Ding, J., Shen, K. B., Du, Z., Li, B., & Yang, S. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b12892 · Cited by 97
Electrochemical properties of LiCoO2 thin film electrode prepared by ink-jet printing technique
Huang, J., Yang, J., Li, W., Cai, W., & Jiang, Z. (2007) · Thin Solid Films · doi:10.1016/j.tsf.2007.09.039 · Cited by 87
Recent progress on printable power supply devices and systems with nanomaterials
Lin, Y., Gao, Y., Fang, F., & Fan, Z. (2018) · Nano Research · doi:10.1007/s12274-018-2068-y · Cited by 85
Inkjet‐Printed Lithium–Sulfur Microcathodes for All‐Printed, Integrated Nanomanufacturing
Milroy, C., Jang, S., Fujimori, T., Dodabalapur, A., & Manthiram, A. (2017) · Small · doi:10.1002/smll.201603786 · Cited by 83
Lin, S., Zhong, Y., Zhao, X., Sawada, T., Li, X., Lei, W., Wang, M., Serizawa, T., & Zhu, H. (2018) · Advanced Materials · doi:10.1002/adma.201803004 · Cited by 77
3D printing in cell culture systems and medical applications
Lerman, M. J., Lembong, J., Gillen, G. J., & Fisher, J. P. (2018) · Applied Physics Reviews · doi:10.1063/1.5046087 · Cited by 77
Su, Y., Du, J., Sun, D., Liu, C., & Cheng, H. (2013) · Nano Research · doi:10.1007/s12274-013-0362-2 · Cited by 76
Mesoscale design of multifunctional 3D graphene networks
Sherrell, P. C., & Mattevi, C. (2016) · Materials Today · doi:10.1016/j.mattod.2015.12.004 · Cited by 70
Dou, P., Liu, Z., Cao, Z., Zheng, J., Wang, C., & Xu, X. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-9727-8 · Cited by 68
Hierarchically Designed Electron Paths in 3D Printed Energy Storage Devices
Park, S. H., Kaur, M., Yun, D., & Kim, W. S. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b02404 · Cited by 68
Wei, S., Qu, G., Luo, G., Huang, Y., Zhang, H., Zhou, X., Wang, L., Liu, Z., & Kong, T. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b00379 · Cited by 66
Ma, J., Wang, P., Dong, L., Ruan, Y., & Lu, H. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.08.096 · Cited by 56
Ion Intercalation Induced Capacitance Improvement for Graphene‐Based Supercapacitor Electrodes
Liu, T., Zhu, C. Y., Kou, T., Worsley, M. A., Qian, F., Condes, C., Duoss, E. B., Spadaccini, C. M., & Li, Y. (2016) · ChemNanoMat · doi:10.1002/cnma.201600107 · Cited by 53
3D‐Printed Structural Pseudocapacitors
Liu, X., Jervis, R., Maher, R. C., Villar‐García, I. J., Marlow, M. N., Shearing, P. R., Ouyang, M., Cohen, L. F., Brandon, N. P., & Wu, B. (2016) · Advanced Materials Technologies · doi:10.1002/admt.201600167 · Cited by 42
Cited by
Recycling and environmental issues of lithium-ion batteries: Advances, challenges and opportunities
Costa, C. M., Barbosa, J. C., Gonçalves, R., Castro, H., Campo, F. J. D., & Lanceros-Méndez, S. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.02.032 · Cited by 611
Orangi, J., Hamade, F., Davis, V. A., & Beidaghi, M. (2020) · ACS Nano · doi:10.1021/acsnano.9b07325 · Cited by 443
Reducing the thickness of solid-state electrolyte membranes for high-energy lithium batteries
Wu, J., Yuan, L., Zhang, W., Li, Z., Xie, X., & Huang, Y. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02241a · Cited by 425
Sulfide and Oxide Inorganic Solid Electrolytes for All-Solid-State Li Batteries: A Review
Reddy, M. V., Julien, C. M., Mauger, A., & Zaghib, K. (2020) · Nanomaterials · doi:10.3390/nano10081606 · Cited by 331
Rashid Khan, H., & Latif Ahmad, A. (2025) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2024.07.014 · Cited by 310
Metadata
- Authors
- Chang, P., Mei, H., Zhou, S., Dassios, K. G., & Cheng, L.
- Venue
- Journal of Materials Chemistry A
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2019
- Volume
- 7
- Issue
- 9
- Pages
- 4230-4258
- ISSN
- 2050-7488 (ISSN-L)
- 2050-7496
- OpenAlex
- W2910394765
- Cited by
- 329
- References
- 121
- FWCI
- 14.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.