3D printing of functional microrobots

Two-photon absorption cross-sections of common photoinitiators

Schafer, K. J., Hales, J. M., Balu, M., Belfield, K. D., Van Stryland, E. W., & Hagan, D. J. (2004) · Journal of Photochemistry and Photobiology A: Chemistry · doi:10.1016/s1010-6030(03)00394-0 · Cited by 247

Two photon induced polymerization of organic–inorganic hybrid biomaterials for microstructured medical devices

DORAISWAMY, A., JIN, C., NARAYAN, R., MAGESWARAN, P., MENTE, P., MODI, R., AUYEUNG, R., CHRISEY, D., OVSIANIKOV, A., & CHICHKOV, B. (2006) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.01.004 · Cited by 245

Degradable Magnetic Composites for Minimally Invasive Interventions: Device Fabrication, Targeted Drug Delivery, and Cytotoxicity Tests

Peters, C., Hoop, M., Pané, S., Nelson, B. J., & Hierold, C. (2016) · Advanced Materials · doi:10.1002/adma.201503112 · Cited by 243

SU‐8 as a structural material for labs‐on‐chips and microelectromechanical systems

Abgrall, P., Conedera, V., Camon, H., Gue, A., & Nguyen, N. (2007) · ELECTROPHORESIS · doi:10.1002/elps.200700333 · Cited by 242

Co-encapsulation of magnetic nanoparticles and doxorubicin into biodegradable microcarriers for deep tissue targeting by vascular MRI navigation

Pouponneau, P., Leroux, J.-C., Soulez, G., Gaboury, L., & Martel, S. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.12.059 · Cited by 241

IRONSperm: Sperm-templated soft magnetic microrobots

Magdanz, V., Khalil, I. S. M., Simmchen, J., Furtado, G. P., Mohanty, S., Gebauer, J., Xu, H., Klingner, A., Aziz, A., Medina-Sánchez, M., et al. (2020) · Science Advances · doi:10.1126/sciadv.aba5855 · Cited by 240

3D Printed Microtransporters: Compound Micromachines for Spatiotemporally Controlled Delivery of Therapeutic Agents

Huang, T., Sakar, M. S., Mao, A., Petruska, A. J., Qiu, F., Chen, X., Kennedy, S., Mooney, D., & Nelson, B. J. (2015) · Advanced Materials · doi:10.1002/adma.201503095 · Cited by 239

Hydrogels for Two‐Photon Polymerization: A Toolbox for Mimicking the Extracellular Matrix

Torgersen, J., Qin, X., Li, Z., Ovsianikov, A., Liska, R., & Stampfl, J. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201203880 · Cited by 238

Unstable fronts and motile structures formed by microrollers

Driscoll, M., Delmotte, B., Youssef, M., Sacanna, S., Donev, A., & Chaikin, P. (2017) · Nature Physics · doi:10.1038/nphys3970 · Cited by 238

Flow Navigation by Smart Microswimmers via Reinforcement Learning

Colabrese, S., Gustavsson, K., Celani, A., & Biferale, L. (2017) · Physical Review Letters · doi:10.1103/physrevlett.118.158004 · Cited by 237

Micromolding of photocrosslinkable hyaluronic acid for cell encapsulation and entrapment

Khademhosseini, A., Eng, G., Yeh, J., Fukuda, J., Blumling, J., Langer, R., & Burdick, J. A. (2006) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30821 · Cited by 236

Superfast Motion of Catalytic Microjet Engines at Physiological Temperature

Sanchez, S., Ananth, A. N., Fomin, V. M., Viehrig, M., & Schmidt, O. G. (2011) · Journal of the American Chemical Society · doi:10.1021/ja205012j · Cited by 235

Mobile Microrobots for Active Therapeutic Delivery

Erkoc, P., Yasa, I. C., Ceylan, H., Yasa, O., Alapan, Y., & Sitti, M. (2019) · Advanced Therapeutics · doi:10.1002/adtp.201800064 · Cited by 230

MOFBOTS: Metal–Organic‐Framework‐Based Biomedical Microrobots

Wang, X., Chen, X., Alcântara, C. C. J., Sevim, S., Hoop, M., Terzopoulou, A., de Marco, C., Hu, C., de Mello, A. J., Falcaro, P., et al. (2019) · Advanced Materials · doi:10.1002/adma.201901592 · Cited by 228

Laser Printing of Three-Dimensional Multicellular Arrays for Studies of Cell–Cell and Cell–Environment Interactions

Gruene, M., Pflaum, M., Hess, C., Diamantouros, S., Schlie, S., Deiwick, A., Koch, L., Wilhelmi, M., Jockenhoevel, S., Haverich, A., et al. (2011) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2011.0185 · Cited by 227

Low temperature additive manufacturing of three dimensional scaffolds for bone-tissue engineering applications: Processing related challenges and property assessment

Kumar, A., Mandal, S., Barui, S., Vasireddi, R., Gbureck, U., Gelinsky, M., & Basu, B. (2016) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2016.01.001 · Cited by 225

Light controlled 3D micromotors powered by bacteria

Vizsnyiczai, G., Frangipane, G., Maggi, C., Saglimbeni, F., Bianchi, S., & Di Leonardo, R. (2017) · Nature Communications · doi:10.1038/ncomms15974 · Cited by 221

Micro-bioreactor array for controlling cellular microenvironments

Figallo, E., Cannizzaro, C., Gerecht, S., Burdick, J. A., Langer, R., Elvassore, N., & Vunjak-Novakovic, G. (2007) · Lab on a Chip · doi:10.1039/b700063d · Cited by 220

Nanomachines: Fundamentals and Applications

Wang, J. (2013) · Cited by 216

Three‐Dimensional SiCN Ceramic Microstructures via Nano‐Stereolithography of Inorganic Polymer Photoresists

Pham, T. A., Kim, D. ‐., Lim, T. ‐., Park, S. ‐., Yang, D., & Lee, K. ‐. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600009 · Cited by 214

Strategies to use fibrinogen as bioink for 3D bioprinting fibrin-based soft and hard tissues

de Melo, B. A. G., Jodat, Y. A., Cruz, E. M., Benincasa, J. C., Shin, S. R., & Porcionatto, M. A. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.09.024 · Cited by 212

Multiphoton fabrication of chemically responsive protein hydrogels for microactuation

Kaehr, B., & Shear, J. B. (2008) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0709571105 · Cited by 211

Artificial Bacterial Flagella for Remote‐Controlled Targeted Single‐Cell Drug Delivery

Mhanna, R., Qiu, F., Zhang, L., Ding, Y., Sugihara, K., Zenobi‐Wong, M., & Nelson, B. J. (2014) · Small · doi:10.1002/smll.201303538 · Cited by 210

Microrobotics and Microorganisms: Biohybrid Autonomous Cellular Robots

Alapan, Y., Yasa, O., Yigit, B., Yasa, I. C., Erkoc, P., & Sitti, M. (2019) · Annual Review of Control, Robotics, and Autonomous Systems · doi:10.1146/annurev-control-053018-023803 · Cited by 210

Visible‐Light‐Mediated Thiol‐Ene Hydrogelation Using Eosin‐Y as the Only Photoinitiator

Shih, H., & Lin, C. (2013) · Macromolecular Rapid Communications · doi:10.1002/marc.201200605 · Cited by 209

Conjugated Polymer Actuators and Devices: Progress and Opportunities

Melling, D., Martínez, J. G., & Jager, E. W. H. (2019) · Advanced Materials · doi:10.1002/adma.201808210 · Cited by 208

Magnetically Actuated Degradable Microrobots for Actively Controlled Drug Release and Hyperthermia Therapy

Park, J., Jin, C., Lee, S., Kim, J., & Choi, H. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201900213 · Cited by 201

Customized PEG‐Derived Copolymers for Tissue‐Engineering Applications

Tessmar, J. K., & Göpferich, A. M. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200600096 · Cited by 199

Elucidating the interaction dynamics between microswimmer body and immune system for medical microrobots

Yasa, I. C., Ceylan, H., Bozuyuk, U., Wild, A.-M., & Sitti, M. (2020) · Science Robotics · doi:10.1126/scirobotics.aaz3867 · Cited by 199

Photopolymers for rapid prototyping

Liska, R., Schuster, M., Inführ, R., Turecek, C., Fritscher, C., Seidl, B., Schmidt, V., Kuna, L., Haase, A., Varga, F., et al. (2007) · Journal of Coatings Technology and Research · doi:10.1007/s11998-007-9059-3 · Cited by 197

Multiwavelength Light-Responsive Au/B-TiO2 Janus Micromotors

Jang, B., Hong, A., Kang, H. E., Alcantara, C., Charreyron, S., Mushtaq, F., Pellicer, E., Büchel, R., Sort, J., Lee, S. S., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b02177 · Cited by 196

Materials and technical innovations in 3D printing in biomedical applications

Tetsuka, H., & Shin, S. R. (2020) · Journal of Materials Chemistry B · doi:10.1039/d0tb00034e · Cited by 196

Elastic Fully Three‐dimensional Microstructure Scaffolds for Cell Force Measurements

Klein, F., Striebel, T., Fischer, J., Jiang, Z., Franz, C. M., von Freymann, G., Wegener, M., & Bastmeyer, M. (2010) · Advanced Materials · doi:10.1002/adma.200902515 · Cited by 192

Selective Decrosslinking in Liquid Crystal Polymer Actuators for Optical Reconfiguration of Origami and Light‐Fueled Locomotion

Jiang, Z., Xiao, Y., Tong, X., & Zhao, Y. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201900470 · Cited by 190

Multi-material bio-fabrication of hydrogel cantilevers and actuators with stereolithography

Chan, V., Jeong, J. H., Bajaj, P., Collens, M., Saif, T., Kong, H., & Bashir, R. (2012) · Lab Chip · doi:10.1039/c1lc20688e · Cited by 188

Translational prospects of untethered medical microrobots

Ceylan, H., Yasa, I. C., Kilic, U., Hu, W., & Sitti, M. (2019) · Progress in Biomedical Engineering · doi:10.1088/2516-1091/ab22d5 · Cited by 188

Soft Microrobots Employing Nonequilibrium Actuation via Plasmonic Heating

Mourran, A., Zhang, H., Vinokur, R., & Möller, M. (2017) · Advanced Materials · doi:10.1002/adma.201604825 · Cited by 187

Submicron Multiphoton Free-Form Fabrication of Proteins and Polymers: Studies of Reaction Efficiencies and Applications in Sustained Release

Pitts, J. D., Campagnola, P. J., Epling, G. A., & Goodman, S. L. (2000) · Macromolecules · doi:10.1021/ma9910437 · Cited by 182

Laser Photofabrication of Cell-Containing Hydrogel Constructs

Ovsianikov, A., Mühleder, S., Torgersen, J., Li, Z., Qin, X.-H., Van Vlierberghe, S., Dubruel, P., Holnthoner, W., Redl, H., Liska, R., et al. (2014) · Langmuir · doi:10.1021/la402346z · Cited by 182

Shape-encoded dynamic assembly of mobile micromachines

Alapan, Y., Yigit, B., Beker, O., Demirörs, A. F., & Sitti, M. (2019) · Nature Materials · doi:10.1038/s41563-019-0407-3 · Cited by 178

Fabrication and Manipulation of Ciliary Microrobots with Non-reciprocal Magnetic Actuation

Kim, S., Lee, S., Lee, J., Nelson, B. J., Zhang, L., & Choi, H. (2016) · Scientific Reports · doi:10.1038/srep30713 · Cited by 173

Zwitterionic 3D‐Printed Non‐Immunogenic Stealth Microrobots

Cabanach, P., Pena‐Francesch, A., Sheehan, D., Bozuyuk, U., Yasa, O., Borros, S., & Sitti, M. (2020) · Advanced Materials · doi:10.1002/adma.202003013 · Cited by 171

Femtosecond laser rapid prototyping of nanoshells and suspending components towards microfluidic devices

Wu, D., Chen, Q.-D., Niu, L.-G., Wang, J.-N., Wang, J., Wang, R., Xia, H., & Sun, H.-B. (2009) · Lab on a Chip · doi:10.1039/b902159k · Cited by 170

Micro-rocket robot with all-optic actuating and tracking in blood

Li, D., Liu, C., Yang, Y., Wang, L., & Shen, Y. (2020) · Light: Science & Applications · doi:10.1038/s41377-020-0323-y · Cited by 170

Three-Dimensional Printing of Shape Memory Composites with Epoxy-Acrylate Hybrid Photopolymer

Yu, R., Yang, X., Zhang, Y., Zhao, X., Wu, X., Zhao, T., Zhao, Y., & Huang, W. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13531 · Cited by 168

Surface-enabled propulsion and control of colloidal microwheels

Tasci, T. O., Herson, P. S., Neeves, K. B., & Marr, D. W. M. (2016) · Nature Communications · doi:10.1038/ncomms10225 · Cited by 166

Hybrid Helical Magnetic Microrobots Obtained by 3D Template‐Assisted Electrodeposition

Zeeshan, M. A., Grisch, R., Pellicer, E., Sivaraman, K. M., Peyer, K. E., Sort, J., Özkale, B., Sakar, M. S., Nelson, B. J., & Pané, S. (2014) · Small · doi:10.1002/smll.201302856 · Cited by 165

Stimuli‐Responsive Microjets with Reconfigurable Shape

Magdanz, V., Stoychev, G., Ionov, L., Sanchez, S., & Schmidt, O. G. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201308610 · Cited by 164

Synthesis and characterization of dextran-methacrylate hydrogels and structural study by SEM

Kim, S.-H., & Chu, C.-C. (2000) · Journal of Biomedical Materials Research · doi:10.1002/(sici)1097-4636(20000315)49:4<517::aid-jbm10>3.0.co;2-8 · Cited by 161

Surface-Chemistry-Mediated Control of Individual Magnetic Helical Microswimmers in a Swarm

Wang, X., Hu, C., Schurz, L., Marco, C. D., Chen, X., Pané, S., & Nelson, B. J. (2018) · ACS Nano · doi:10.1021/acsnano.8b02907 · Cited by 161

3D‐Printed Microrobotic Transporters with Recapitulated Stem Cell Niche for Programmable and Active Cell Delivery

Yasa, I. C., Tabak, A. F., Yasa, O., Ceylan, H., & Sitti, M. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808992 · Cited by 159

Light‐Controlled Micromotors and Soft Microrobots

Palagi, S., Singh, D. P., & Fischer, P. (2019) · Advanced Optical Materials · doi:10.1002/adom.201900370 · Cited by 158

Effect of low numerical-aperture femtosecond two-photon absorption on (SU-8) resist for ultrahigh-aspect-ratio microstereolithography

Teh, W. H., Dürig, U. T., Drechsler, U., Smith, C. G., & Güntherodt, H. ‐. (2005) · Journal of Applied Physics · doi:10.1063/1.1856214 · Cited by 154

Preclinical study of SZ2080 material 3D microstructured scaffolds for cartilage tissue engineering made by femtosecond direct laser writing lithography

Mačiulaitis, J., Deveikytė, M., Rekštytė, S., Bratchikov, M., Darinskas, A., Šimbelytė, A., Daunoras, G., Laurinavičienė, A., Laurinavičius, A., Gudas, R., et al. (2015) · Biofabrication · doi:10.1088/1758-5090/7/1/015015 · Cited by 154

Synthetic and living micropropellers for convection-enhanced nanoparticle transport

Schuerle, S., Soleimany, A. P., Yeh, T., Anand, G. M., Häberli, M., Fleming, H. E., Mirkhani, N., Qiu, F., Hauert, S., Wang, X., et al. (2019) · Science Advances · doi:10.1126/sciadv.aav4803 · Cited by 154

Magnetic Propulsion of Microswimmers with DNA-Based Flagellar Bundles

Maier, A., Weig, C., Oswald, P., Frey, E., Fischer, P., & Liedl, T. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b03716 · Cited by 152

A Monolithic Force‐Sensitive 3D Microgripper Fabricated on the Tip of an Optical Fiber Using 2‐Photon Polymerization

Power, M., Thompson, A. J., Anastasova, S., & Yang, G. (2018) · Small · doi:10.1002/smll.201703964 · Cited by 152

3D‐Printable Antimicrobial Composite Resins

Yue, J., Zhao, P. T., Gerasimov, J. Y., van de Lagemaat, M., Grotenhuis, A., Rustema‐Abbing, M., van der Mei, H. C., Busscher, H. J., Herrmann, A. P., & Ren, Y. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201502384 · Cited by 150

Light-driven micro-tool equipped with a syringe function

Villangca, M. J., Palima, D. Z., Bañas, A. R., & Glückstad, J. (2016) · Light Science & Applications · doi:10.1038/lsa.2016.148 · Cited by 149

Magnetically driven piezoelectric soft microswimmers for neuron-like cell delivery and neuronal differentiation

Chen, X., Liu, J., Dong, M., Müller, L., Chatzipirpiridis, G., Hu, C., Terzopoulou, A., Torlakcik, H., Wang, X., Mushtaq, F., et al. (2019) · Materials Horizons · doi:10.1039/c9mh00279k · Cited by 149

Indirect optical trapping using light driven micro-rotors for reconfigurable hydrodynamic manipulation

Būtaitė, U. G., Gibson, G. M., Ho, Y.-L. D., Taverne, M. P. C., Taylor, J. M., & Phillips, D. B. (2019) · Nature Communications · doi:10.1038/s41467-019-08968-7 · Cited by 148

Photoinitiating systems for cationic photopolymerization: Ongoing push toward long wavelengths and low light intensities

Shi, S., Croutxé‐Barghorn, C., & Allonas, X. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.09.007 · Cited by 147

Single cell manipulation using ferromagnetic composite microtransporters

Sakar, M. S., Steager, E. B., Kim, D. H., Kim, M. J., Pappas, G. J., & Kumar, V. (2010) · Applied Physics Letters · doi:10.1063/1.3293457 · Cited by 146

Self-Propelled Carbohydrate-Sensitive Microtransporters with Built-In Boronic Acid Recognition for Isolating Sugars and Cells

Kuralay, F., Sattayasamitsathit, S., Gao, W. F., Uygun, A., Katzenberg, A., & Wang, J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja306080t · Cited by 143

Superparamagnetic microrobots: fabrication by two-photon polymerization and biocompatibility

Suter, M., Zhang, L., Siringil, E. C., Peters, C., Lühmann, T. C., Ergeneman, O., Peyer, K. E., Nelson, B. J., & Hierold, C. (2013) · Biomedical Microdevices · doi:10.1007/s10544-013-9791-7 · Cited by 142

The optoelectronic microrobot: A versatile toolbox for micromanipulation

Zhang, S., Scott, E., Singh, J., Chen, Y., Zhang, Y., Elsayed, M., Chamberlain, M. D., Shakiba, N., Adams, K. V., Yu, S., et al. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1903406116 · Cited by 142

Initiation efficiency and cytotoxicity of novel water-soluble two-photon photoinitiators for direct 3D microfabrication of hydrogels

Li, Z., Torgersen, J., ajami, A., Mühleder, S., Qin, X., Husinsky, W., Holnthoner, W., Ovsianikov, A., Stampfl, J., & Liska, R. (2013) · RSC Advances · doi:10.1039/c3ra42918k · Cited by 141

Development of Magnet‐Driven and Image‐Guided Degradable Microrobots for the Precise Delivery of Engineered Stem Cells for Cancer Therapy

Wei, T., Liu, J., Li, D., Chen, S., Zhang, Y., Li, J., Fan, L., Guan, Z., Lo, C., Wang, L., et al. (2020) · Small · doi:10.1002/smll.201906908 · Cited by 141

Highly efficient water-soluble visible light photoinitiators

Benedikt, S., Wang, J., Marković, M., Moszner, N., Dietliker, K., Ovsianikov, A., Grützmacher, H., & Liska, R. (2015) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.27903 · Cited by 139

3D‐Printing of Functional Biomedical Microdevices via Light‐ and Extrusion‐Based Approaches

Hwang, H. H., Zhu, W. Z., Victorine, G., Lawrence, N., & Chen, S. (2017) · Small Methods · doi:10.1002/smtd.201700277 · Cited by 139

Cooperative recyclable magnetic microsubmarines for oil and microplastics removal from water

Sun, M., Chen, W., Fan, X., Tian, C., Sun, L., & Xie, H. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100682 · Cited by 139

Structure−Property Relationships of Photopolymerizable Poly(ethylene glycol) Dimethacrylate Hydrogels

Lin‐Gibson, S., Jones, R. L., Washburn, N. R., & Horkay, F. (2005) · Macromolecules · doi:10.1021/ma0487002 · Cited by 137

Effect of gelatin source and photoinitiator type on chondrocyte redifferentiation in gelatin methacryloyl-based tissue-engineered cartilage constructs

Pahoff, S., Meinert, C., Bas, O., Nguyen, L., Klein, T. J., & Hutmacher, D. W. (2019) · Journal of Materials Chemistry B · doi:10.1039/c8tb02607f · Cited by 137

Guiding neuronal development with in situ microfabrication

Kaehr, B., Allen, R., Javier, D. J., Currie, J., & Shear, J. B. (2004) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0407204101 · Cited by 136

Bioinspired Spiky Micromotors Based on Sporopollenin Exine Capsules

Wang, H., Potroz, M. G., Jackman, J. A., Khezri, B., Marić, T., Cho, N., & Pumera, M. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201702338 · Cited by 136

Acrylate‐Based Photopolymer for Two‐Photon Microfabrication and Photonic Applications

Nguyen, L. H., Straub, M., & Gu, M. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200400212 · Cited by 135

Biodegradable Metal–Organic Framework‐Based Microrobots (MOFBOTs)

Terzopoulou, A., Wang, X., Chen, X., Palacios‐Corella, M., Franco, C., Herrero‐Martín, J., Qin, X., Sort, J., deMello, A. J., Nelson, B. J., et al. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.202001031 · Cited by 135

3D printed electrically-driven soft actuators

Haghiashtiani, G., Habtour, E., Park, S. H., Gardea, F., & McAlpine, M. C. (2018) · Extreme Mechanics Letters · doi:10.1016/j.eml.2018.02.002 · Cited by 134

High-speed multiphoton absorption polymerization: fabrication of microfluidic channels with arbitrary cross-sections and high aspect ratios

Kumi, G., Yanez, C. O., Belfield, K. D., & Fourkas, J. T. (2010) · Lab on a Chip · doi:10.1039/b923377f · Cited by 133

Naphthalimide based methacrylated photoinitiators in radical and cationic photopolymerization under visible light

Xiao, P., Dumur, F., Frigoli, M., Tehfe, M., Graff, B., Fouassier, J., Gigmès, D., & Lalevée, J. (2013) · Polymer Chemistry · doi:10.1039/c3py00766a · Cited by 133

Fused filament 3D printing of ionic polymer-metal composites (IPMCs)

Carrico, J. D., Traeden, N. W., Aureli, M., & Leang, K. K. (2015) · Smart Materials and Structures · doi:10.1088/0964-1726/24/12/125021 · Cited by 133

Metal-Oxide-Based Microjets for the Simultaneous Removal of Organic Pollutants and Heavy Metals

Villa, K., Parmar, J., Vilela, D., & Sánchez, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04353 · Cited by 133

Micro/Nanomachines and Living Biosystems: From Simple Interactions to Microcyborgs

Wang, H., & Pumera, M. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705421 · Cited by 129

Artificial bacterial flagella functionalized with temperature-sensitive liposomes for controlled release

Qiu, F., Mhanna, R., Zhang, L., Ding, Y., Fujita, S., & Nelson, B. J. (2014) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2014.01.099 · Cited by 128

Thiol–Ene Based Polymers as Versatile Materials for Microfluidic Devices for Life Sciences Applications

Sticker, D., Geczy, R., Häfeli, U. O., & Kutter, J. P. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b22050 · Cited by 128

Temozolomide-loaded photopolymerizable PEG-DMA-based hydrogel for the treatment of glioblastoma

Fourniols, T., Randolph, L. D., Staub, A., Vanvarenberg, K., Leprince, J. G., Véronique Préat, A., Rieux, A. D., & Danhier, F. (2015) · Journal of Controlled Release · doi:10.1016/j.jconrel.2015.05.272 · Cited by 126

Superparamagnetic Twist‐Type Actuators with Shape‐Independent Magnetic Properties and Surface Functionalization for Advanced Biomedical Applications

Peters, C., Ergeneman, O., Wendel‐Garcia, P. D., Müller, M., Pané, S., Nelson, B. J., & Hierold, C. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400596 · Cited by 124

Three-dimensional optical circuitry using two-photon-assisted polymerization

Joshi, M. P., Pudavar, H. E., Swiatkiewicz, J. J., Prasad, P. N., & Reianhardt, B. A. (1999) · Applied Physics Letters · doi:10.1063/1.123283 · Cited by 124

Multicompartment Tubular Micromotors Toward Enhanced Localized Active Delivery

de Ávila, B. E., Lopez‐Ramirez, M. A., Mundaca‐Uribe, R., Wei, X., Ramírez‐Herrera, D. E., Karshalev, E., Nguyen, B., Fang, R. H., Zhang, L., & Wang, J. (2020) · Advanced Materials · doi:10.1002/adma.202000091 · Cited by 124

Three-dimensional heterogeneous assembly of coded microgels using an untethered mobile microgripper

Chung, S. E., Dong, X., & Sitti, M. (2015) · Lab on a Chip · doi:10.1039/c5lc00009b · Cited by 123

Indirect 3D and 4D Printing of Soft Robotic Microstructures

Marco, C. D., Alcantara, C., Kim, S., Vangosa, F. B., Kadioglu, A., Bernardis, G. D., Chen, X., Marano, C., Nelson, B. J., & Pané, S. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900332 · Cited by 123

Time-resolved studies of femtosecond-laser induced melt dynamics

Unger, C., Koch, J., Overmeyer, L., & Chichkov, B. N. (2012) · Optics Express · doi:10.1364/oe.20.024864 · Cited by 121

Coordinated behaviors of artificial micro/nanomachines: from mutual interactions to interactions with the environment

Wang, H., & Pumera, M. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00877b · Cited by 121

Stimuli-Responsive Actuator Fabricated by Dynamic Asymmetric Femtosecond Bessel Beam for In Situ Particle and Cell Manipulation

Li, R., Jin, D., Pan, D., Ji, S., Chen, X., Liu, G., Fan, S., Wu, H., Li, J., Hu, Y., et al. (2020) · ACS Nano · doi:10.1021/acsnano.0c00381 · Cited by 120

Visible light photoinitiating systems by charge transfer complexes: Photochemistry without dyes

Garra, P., Fouassier, J., Lakhdar, S., Yağcı, Y., & Lalevée, J. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101277 · Cited by 117

Laser-based micro/nanoengineering for biological applications

Stratakis, E. I., Ranella, A., Farsari, M., & Fotakis, C. (2009) · Progress in Quantum Electronics · doi:10.1016/j.pquantelec.2009.06.001 · Cited by 115

Dynamic and programmable self-assembly of micro-rafts at the air-water interface

Wang, W., Giltinan, J., Zakharchenko, S., & Sitti, M. (2017) · Science Advances · doi:10.1126/sciadv.1602522 · Cited by 114

VA‐086 methacrylate gelatine photopolymerizable hydrogels: A parametric study for highly biocompatible 3 D cell embedding

Occhetta, P., Visone, R., Russo, L., Cipolla, L., Moretti, M., & Rasponi, M. (2014) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.35346 · Cited by 113

Light-driven micron-scale 3D hydrogel actuator produced by two-photon polymerization microfabrication

Zheng, C., Jin, F., Zhao, Y., Zheng, M., Liu, J., Dong, X., Xiong, Z., Xia, Y., & Duan, X. (2019) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2019.127345 · Cited by 113

Roads to Smart Artificial Microswimmers

Tsang, A. C. H., Demir, E., Ding, Y., & Pak, O. S. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.201900137 · Cited by 113

Magnetic Micromotors for Multiple Motile Sperm Cells Capture, Transport, and Enzymatic Release

Xu, H. C., Medina‐Sánchez, M., & Schmidt, O. G. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202005657 · Cited by 113

3D Fabrication of Fully Iron Magnetic Microrobots

Alcantara, C., Kim, S., Lee, S., Jang, B., Thakolkaran, P., Kim, J., Choi, H., Nelson, B. J., & Pané, S. (2019) · Small · doi:10.1002/smll.201805006 · Cited by 112

A magnetically actuated microrobot for targeted neural cell delivery and selective connection of neural networks

Kim, E., Jeon, S., An, H., Kianpour, M., Yu, S., Kim, J., Rah, J., & Choi, H. (2020) · Science Advances · doi:10.1126/sciadv.abb5696 · Cited by 110

SU-8 for real three-dimensional subdiffraction-limit two-photon microfabrication

Teh, W. H., Dürig, U. T., Salis, G., Harbers, R., Drechsler, U., Mahrt, R. F., Smith, C. G., & Güntherodt, H. ‐. (2004) · Applied Physics Letters · doi:10.1063/1.1753059 · Cited by 109

Acoustic Microcannons: Toward Advanced Microballistics

Soto, F., Martín, A., Ibsen, S. D., Vaidyanathan, M., García‐Gradilla, V., Levin, Y., Escarpa, A., Esener, S. C., & Wang, J. (2015) · ACS Nano · doi:10.1021/acsnano.5b07080 · Cited by 108

Light‐Driven Janus Hollow Mesoporous TiO2–Au Microswimmers

Sridhar, V., Park, B., & Sitti, M. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201704902 · Cited by 108

Manipulation of emergent vortices in swarms of magnetic rollers

Kokot, G., & Snezhko, A. (2018) · Nature Communications · doi:10.1038/s41467-018-04765-w · Cited by 108

Microrobots Derived from Variety Plant Pollen Grains for Efficient Environmental Clean Up and as an Anti‐Cancer Drug Carrier

Marić, T., Nasir, M. Z. M., Rosli, N. F., Budanović, M., Webster, R. D., Cho, N., & Pumera, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000112 · Cited by 108

A material odyssey for 3D nano/microstructures: two photon polymerization based nanolithography in bioapplications

Liao, C., Wuethrich, A., & Trau, M. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100635 · Cited by 108

Addressable Acoustic Actuation of 3D Printed Soft Robotic Microsystems

Kaynak, M., Dirix, P., & Sakar, M. S. (2020) · Advanced Science · doi:10.1002/advs.202001120 · Cited by 106

Damage, Healing, and Remodeling in Optogenetic Skeletal Muscle Bioactuators

Raman, R., Grant, L., Seo, Y., Cvetkovic, C., Gapinske, M., Palasz, A., Dabbous, H., Kong, H., Pérez‐Piñera, P., & Bashir, R. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700030 · Cited by 103

Feature-size reduction of photopolymerized structures by femtosecond optical curing of SU-8

Seet, K. K., Juodkazis, S., Jarutis, V., & Misawa, H. (2006) · Applied Physics Letters · doi:10.1063/1.2221499 · Cited by 102

High-Resolution 3D Bioprinting of Photo-Cross-linkable Recombinant Collagen to Serve Tissue Engineering Applications

Tytgat, L., Dobos, A., Marković, M., Damme, L. V., Hoorick, J. V., Bray, F., Hugo Thienpont, A., Ottevaere, H., Dubruel, P., Ovsianikov, A., et al. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c00386 · Cited by 102

A Drop-on-Demand Ink-Jet Printer for Combinatorial Libraries and Functionally Graded Ceramics

Mohebi, M. M., & Evans, J. (2002) · Journal of Combinatorial Chemistry · doi:10.1021/cc010075e · Cited by 100

Three-dimensional woodpile photonic crystal templates for the infrared spectral range

Mizeikis, V., Seet, K. K., Juodkazis, S., & Misawa, H. (2004) · Optics Letters · doi:10.1364/ol.29.002061 · Cited by 98

Nonlinear 3D projection printing of concave hydrogel microstructures for long-term multicellular spheroid and embryoid body culture

Hribar, K. C., Finlay, D., Ma, X., Qu, X., Ondeck, M. G., Chung, P. H., Zanella, F., Engler, A. J., Sheikh, F., Vuori, K., et al. (2015) · Lab on a Chip · doi:10.1039/c5lc00159e · Cited by 96

Self-Propelled and Targeted Drug Delivery of Poly(aspartic acid)/Iron–Zinc Microrocket in the Stomach

Zhou, M., Hou, T., Li, J., Yu, S., Xu, Z., Yin, M., Wang, J., & Wang, X. (2019) · ACS Nano · doi:10.1021/acsnano.8b06773 · Cited by 96

Fabrication and Characterization of a Magnetic Drilling Actuator for Navigation in a Three-dimensional Phantom Vascular Network

Lee, S., Lee, S.-M., Kim, S., Yoon, C.-H., Park, H., Kim, J., & Choi, H. (2018) · Scientific Reports · doi:10.1038/s41598-018-22110-5 · Cited by 95

Biocatalytic self-propelled submarine-like metal-organic framework microparticles with pH-triggered buoyancy control for directional vertical motion

Guo, Z., Wang, T., Rawal, A., Hou, J., Cao, Z., Zhang, H., Xu, J., Gu, Z., Chen, V., & Liang, K. (2019) · Materials Today · doi:10.1016/j.mattod.2019.04.022 · Cited by 94

3D Microstructures of Liquid Crystal Networks with Programmed Voxelated Director Fields

Guo, Y., Shahsavan, H., & Sitti, M. (2020) · Advanced Materials · doi:10.1002/adma.202002753 · Cited by 92

Novel photoinitiator with a radical quenching moiety for confining radical diffusion in two-photon induced photopolymerization

Lu, W., Dong, X., Chen, W., Zhao, Z., & Duan, X. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04025h · Cited by 91

Two-photon polymerization of hydrogels – versatile solutions to fabricate well-defined 3D structures

Ciuciu, A. I., & Cywiński, P. (2014) · RSC Advances · doi:10.1039/c4ra06892k · Cited by 90

Tailoring Metal/TiO 2 Interface to Influence Motion of Light‐Activated Janus Micromotors

Marić, T., Nasir, M. Z. M., Webster, R. D., & Pumera, M. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201908614 · Cited by 90

Automated microfluidic protein immunoblotting

He, M., & Herr, A. E. (2010) · Nature Protocols · doi:10.1038/nprot.2010.142 · Cited by 89

The Boston Consulting Group

Heuskel, D., & Claas, B. (2005) · Gabler Verlag eBooks · doi:10.1007/978-3-322-82497-4_70 · Cited by 89

Study of the Migration of Photoinitiators Used in Printed Food-Packaging Materials into Food Simulants

Sanches-Silva, A. T., André, C., Castanheira, I. P., Cruz, J. M., Pastorelli, S., Catherine, S., & Paseiro‐Losada, P. (2009) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf8035758 · Cited by 88

Mechanical Rubbing of Blood Clots Using Helical Robots Under Ultrasound Guidance

Khalil, I. S. M., Mahdy, D. S. A., Sharkawy, A. E., Moustafa, R. R., Tabak, A. F., Mitwally, M. E., Hesham, S., Hamdi, N., Klingner, A., Mohamed, A., et al. (2018) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2018.2792156 · Cited by 88

3D Chemical Patterning of Micromaterials for Encoded Functionality

Ceylan, H., Yasa, I. C., & Sitti, M. (2016) · Advanced Materials · doi:10.1002/adma.201605072 · Cited by 85

Real-Time Optoacoustic Tracking of Single Moving Micro-objects in Deep Phantom and Ex Vivo Tissues

Aziz, A., Medina‐Sánchez, M., Claussen, J., & Schmidt, O. G. (2019) · Nano Letters · doi:10.1021/acs.nanolett.9b02869 · Cited by 85

Active Patchy Colloids with Shape-Tunable Dynamics

Wang, Z., Wang, Z., Li, J., Cheung, S. T. H., Tian, C., Kim, S., Yi, G., Ducrot, É., & Wang, Y. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b07785 · Cited by 85

Enzymatic synthesis of hyaluronic acid vinyl esters for two-photon microfabrication of biocompatible and biodegradable hydrogel constructs

Qin, X., Gruber, P., Marković, M., Plochberger, B., Klotzsch, E., Stampfl, J., Ovsianikov, A., & Liska, R. (2014) · Polymer Chemistry · doi:10.1039/c4py00792a · Cited by 84

Laser 3D Printing with Sub‐Microscale Resolution of Porous Elastomeric Scaffolds for Supporting Human Bone Stem Cells

Petrochenko, P. E., Torgersen, J., Gruber, P., Hicks, L. A., Zheng, J., Kumar, G., Narayan, R. J., Goering, P. L., Liska, R., Stampfl, J., et al. (2014) · Advanced Healthcare Materials · doi:10.1002/adhm.201400442 · Cited by 82

Noncytotoxic artificial bacterial flagella fabricated from biocompatible ORMOCOMP and iron coating

Qiu, F., Zhang, L., Peyer, K. E., Casarosa, M., Franco‐Obregón, A., Choi, H., & Nelson, B. J. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb20840k · Cited by 82

Gel-Based Self-Propelling Particles Get Programmed To Dance

Sharma, R., Chang, S. T., & Velev, O. D. (2012) · Langmuir · doi:10.1021/la301437f · Cited by 81

Vat photopolymerization 3D printing of acid-cleavable PEG-methacrylate networks for biomaterial applications

Aduba, D. C., Margaretta, E., Marnot, A., Heifferon, K. V., Surbey, W. R., Chartrain, N. A., Whittington, A. R., Long, T. E., & Williams, C. B. (2019) · Materials Today Communications · doi:10.1016/j.mtcomm.2019.01.003 · Cited by 81

Two-photon polymerization of biocompatible photopolymers for microstructured 3D biointerfaces

Weiß, T., Schade, R., Laube, T., Berg, A., Hildebrand, G., Wyrwa, R., Schnabelrauch, M., & Liefeith, K. (2011) · Advanced Engineering Materials · doi:10.1002/adem.201080090 · Cited by 80

Floating magnetic microrobots for fiber functionalization

Barbot, A., Tan, H., Power, M., Florent Seichepine, A., & Yang, G. (2019) · Science Robotics · doi:10.1126/scirobotics.aax8336 · Cited by 80

Photopolymerization kinetics of an epoxy‐based resin for stereolithography

Corcione, C. E., Greco, A., & Maffezzoli, A. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20347 · Cited by 79

Force Modulation and Adaptability of 3D‐Bioprinted Biological Actuators Based on Skeletal Muscle Tissue

Mestre, R., Patiño, T., Barceló, X., Anand, S., Perez‐Jiménez, A., & Sánchez, S. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800631 · Cited by 79

Magnetic Resonance Imaging System–Driven Medical Robotics

Erin, Ö., Boyvat, M., Tiryaki, M. E., Phelan, M. F., & Sitti, M. (2019) · Advanced Intelligent Systems · doi:10.1002/aisy.201900110 · Cited by 78

Reusable and Long‐Lasting Active Microcleaners for Heterogeneous Water Remediation

Parmar, J., Vilela, D., Pellicer, E., Ojos, D. E.-D. L., Sort, J., & Sánchez, S. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201600381 · Cited by 77

Properties of crosslinked protein matrices for tissue engineering applications synthesized by multiphoton excitation

Basu, S., & Campagnola, P. J. (2004) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.30175 · Cited by 76

New Photoactivators for Multiphoton Excited Three-dimensional Submicron Cross-linking of Proteins: Bovine Serum Albumin and Type 1 Collagen¶†

Pitts, J. D., Howell, A. R., Taboada, R., Banerjee, I. A., Wang, J., Goodman, S. L., & Campagnola, P. J. (2002) · Photochemistry and Photobiology · doi:10.1562/0031-8655(2002)0760135npfmet2.0.co2 · Cited by 76

Reactive Inkjet Printing of Biocompatible Enzyme Powered Silk Micro‐Rockets

Gregory, D. A., Zhang, Y., Smith, P. J., Zhao, X., & Ebbens, S. J. (2016) · Small · doi:10.1002/smll.201600921 · Cited by 73

A novel copper containing photoinitiator, copper(ii) acylphosphinate, and its application in both the photomediated CuAAC reaction and in atom transfer radical polymerization

Gong, T., Adzima, B. J., & Bowman, C. N. (2013) · Chemical Communications · doi:10.1039/c3cc43637c · Cited by 72

Multiphoton crosslinking for biocompatible 3D printing of type I collagen

Bell, A., Kofron, M. J., & Nistor, V. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035007 · Cited by 71

Thermal activation of catalytic microjets in blood samples using microfluidic chips

Soler, L., Martínez-Cisneros, C. S., Swiersy, A., Sánchez, S., & Schmidt, O. G. (2013) · Lab on a Chip · doi:10.1039/c3lc50756d · Cited by 71

Emergent hydrodynamic bound states between magnetically powered micropropellers

Martínez‐Pedrero, F., Navarro-Argemí, E., Ortiz-Ambriz, A., Pagonabarraga, I., & Tierno, P. (2018) · Science Advances · doi:10.1126/sciadv.aap9379 · Cited by 71

Novel 3D-printed methacrylated chitosan-laponite nanosilicate composite scaffolds enhance cell growth and biomineral formation in MC3T3 pre-osteoblasts

Cebe, T., Ahuja, N., do Monte, F. A., Awad, K. R., Vyavhare, K., Aswath, P. B., Huang, J., Brotto, M., & Varanasi, V. G. (2018) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2018.260 · Cited by 70

Reconfigurable structure and tunable transport in synchronized active spinner materials

Han, K., Kokot, G., Das, S., Winkler, R. G., Gompper, G., & Snezhko, A. (2020) · Science Advances · doi:10.1126/sciadv.aaz8535 · Cited by 70

Helical and Tubular Lipid Microstructures that are Electroless‐Coated with CoNiReP for Wireless Magnetic Manipulation

Schuerle, S., Pané, S., Pellicer, E., Sort, J., Baró, M. D., & Nelson, B. J. (2012) · Small · doi:10.1002/smll.201101821 · Cited by 67

Rapid Two‐Photon Polymerization of an Arbitrary 3D Microstructure with 3D Focal Field Engineering

Yang, D., Liu, L., Gong, Q., & Li, Y. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201900041 · Cited by 67

Improved cell viability for large-scale biofabrication with photo-crosslinkable hydrogel systems through a dual-photoinitiator approach

Han, W. T., Jang, T., Chen, S., Chong, L. S. H., Jung, H., & Song, J. (2019) · Biomaterials Science · doi:10.1039/c9bm01347d · Cited by 67

3D printed micro-scale force gauge arrays to improve human cardiac tissue maturation and enable high throughput drug testing

Ma, X., Dewan, S., Liu, J., Tang, M., Miller, K. L., Yu, C., Lawrence, N., McCulloch, A. D., & Chen, S. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.12.026 · Cited by 66

Beyond imaging: Macro- and microscale medical robots actuated by clinical MRI scanners

Martel, S. M. (2017) · Science Robotics · doi:10.1126/scirobotics.aam8119 · Cited by 65

Self‐Propelled 3D‐Printed “Aircraft Carrier” of Light‐Powered Smart Micromachines for Large‐Volume Nitroaromatic Explosives Removal

Kong, L., Ambrosi, A., Nasir, M. Z. M., Guan, J., & Pumera, M. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201903872 · Cited by 65

Multiphoton Lithography of Unconstrained Three‐Dimensional Protein Microstructures

Spivey, E. C., Ritschdorff, E. T., Connell, J. L., McLennon, C. A., Schmidt, C. E., & Shear, J. B. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201201465 · Cited by 64

Stabilization strategies in extrusion-based 3D bioprinting for tissue engineering

Shapira, A., Noor, N., Asulin, M., & Dvir, T. (2018) · Applied Physics Reviews · doi:10.1063/1.5055659 · Cited by 63

On-the-fly catalytic degradation of organic pollutants using magneto-photoresponsive bacteria-templated microcleaners

Mushtaq, F., Chen, X., Staufert, S., Torlakcik, H., Wang, X., Hoop, M., Gerber, A., Li, X., Cai, J. W., Nelson, B. J., et al. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta06290d · Cited by 62

Shape-programmed 3D printed swimming microtori for the transport of passive and active agents

Baker, R., Montenegro‐Johnson, T. D., Sediako, A. D., Thomson, M. J., Sen, A., Lauga, E., & Aranson, I. S. (2019) · Nature Communications · doi:10.1038/s41467-019-12904-0 · Cited by 62

Self‐Propelled Rolled‐Up Polyelectrolyte Multilayer Microrockets

Hu, N., Sun, M., Lin, X., Gao, C., Zhang, B., Zheng, C., Xie, H., & He, Q. Z. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705684 · Cited by 61

One-component cationic photoinitiators based on coumarin scaffold iodonium salts as highly sensitive photoacid generators for 3D printing IPN photopolymers under visible LED sources

Topa-Skwarczyńska, M., Hola, E., Galek, M., Petko, F., Pilch, M., Popielarz, R., Morlet‐Savary, F., Graff, B., Lalevée, J., & Ortyl, J. (2020) · Polymer Chemistry · doi:10.1039/d0py00677g · Cited by 61

Multimaterial 3D Printing for Microrobotic Mechanisms

Soreni‐Harari, M., Pierre, R. S., McCue, C., Moreno, K., & Bergbreiter, S. (2019) · Soft Robotics · doi:10.1089/soro.2018.0147 · Cited by 60

In‐Gel Direct Laser Writing for 3D‐Designed Hydrogel Composites That Undergo Complex Self‐Shaping

Nishiguchi, A., Mourran, A., Zhang, H., & Möller, M. (2017) · Advanced Science · doi:10.1002/advs.201700038 · Cited by 59

Rotibot: Use of Rotifers as Self‐Propelling Biohybrid Microcleaners

Soto, F., Lopez‐Ramirez, M. A., Jeerapan, I., de Ávila, B. E., Mishra, R. K., Lu, X., Chai, I., Chen, C., Kupor, D., Nourhani, A., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900658 · Cited by 59

Design of high efficiency for two-photon polymerization initiator: combination of radical stabilization and large two-photon cross-section achieved by N-benzyl 3,6-bis(phenylethynyl)carbazole derivatives

Xing, J.-F., Chen, W., Gu, J., Dong, X.-Z., Takeyasu, N., Tanaka, T., Duan, X.-M., & Kawata, S. (2007) · Journal of Materials Chemistry · doi:10.1039/b616792f · Cited by 58

Cooperative manipulation and transport of microobjects using multiple helical microcarriers

Huang, T., Qiu, F., Tung, H.-W., Peyer, K. E., Shamsudhin, N., Pokki, J., Zhang, L., Chen, X., Nelson, B. J., & Sakar, M. S. (2014) · RSC Advances · doi:10.1039/c4ra02260b · Cited by 57

Magnetically Driven Undulatory Microswimmers Integrating Multiple Rigid Segments

Liao, P., Xing, L., Zhang, S., & Sun, D. B. (2019) · Small · doi:10.1002/smll.201901197 · Cited by 57

Microwheels on microroads: Enhanced translation on topographic surfaces

Yang, T., Tomaka, A., Tasci, T. O., Neeves, K. B., Wu, N., & Marr, D. W. M. (2019) · Science Robotics · doi:10.1126/scirobotics.aaw9525 · Cited by 57

A comparative schlieren imaging study between ns and sub-ps laser forward transfer of Cr

Zergioti, I., Papazoglou, D. G., Karaiskou, A., et al. (2003) · Applied Surface Science · doi:10.1016/s0169-4332(02)01363-6 · Cited by 56

Femtosecond-Laser-Based 3D Printing for Tissue Engineering and Cell Biology Applications

Ho, C. M. B., Mishra, A., Hu, K., An, J., Kim, Y., & Yoon, Y. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00438 · Cited by 55

Programmable assembly of heterogeneous microparts by an untethered mobile capillary microgripper

Giltinan, J., Diller, E., & Sitti, M. (2016) · Lab on a Chip · doi:10.1039/c6lc00981f · Cited by 54

3D Printing Microactuators for Soft Microrobots

Tyagi, M., Spinks, G. M., & Jager, E. W. H. (2020) · Soft Robotics · doi:10.1089/soro.2019.0129 · Cited by 54

Laser‐Printing and 3D Optical‐Control of Untethered Microrobots

Avci, E., Grammatikopoulou, M., & Yang, G. (2017) · Advanced Optical Materials · doi:10.1002/adom.201700031 · Cited by 52

Subcellular stretch-induced cytoskeletal response of single fibroblasts within 3D designer scaffolds

Scheiwe, A. C., Frank, S. C., Autenrieth, T. J., Bastmeyer, M., & Wegener, M. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2014.12.018 · Cited by 50

Cationic photopolymerization of bisphenol A diglycidyl ether epoxy under 385 nm

Liu, G., Zhu, X., Xu, B., Qian, X., Song, G., & Nie, J. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39612 · Cited by 49

Stitchless support-free 3D printing of free-form micromechanical structures with feature size on-demand

Jonušauskas, L., Baravykas, T., Andrijec, D., Gadišauskas, T., & Purlys, V. (2019) · Scientific Reports · doi:10.1038/s41598-019-54024-1 · Cited by 49

3D‐Printed Microrobots with Integrated Structural Color for Identification and Tracking

Koepele, C. A., Guix, M., Bi, C., Adam, G., & Cappelleri, D. J. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.201900147 · Cited by 49

A photo‐oxidizable kinetic pathway of three‐component photoinitiator systems containing porphrin dye (Zn‐tpp), an electron donor and diphenyl iodonium salt

Kim, D., & Stansbury, J. W. (2009) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.23401 · Cited by 48

Magnetic microkayaks: propulsion of microrods precessing near a surface by kilohertz frequency, rotating magnetic fields

Mair, L. O., Evans, E. E., Nacev, A. N., Stepanov, P. Y., Hilaman, R., Chowdhury, S., Jafari, S., Wang, W., Shapiro, B., & Weinberg, I. N. (2017) · Nanoscale · doi:10.1039/c6nr09459g · Cited by 48

Microscopic hollow hydrogel springs, necklaces and ladders: a tubular robot as a potential vascular scavenger

Liang, S., Tu, Y., Chen, Q., Jia, W. P., Wang, W., & Zhang, L. (2019) · Materials Horizons · doi:10.1039/c9mh00793h · Cited by 46

Magnetically Actuated SiCN‐Based Ceramic Microrobot for Guided Cell Delivery

Gyak, K., Jeon, S., Ha, L., Kim, S., Kim, J., Lee, K.-S., Choi, H., & Kim, D. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201900739 · Cited by 44

Star‐shaped Polymers through Simple Wavelength‐Selective Free‐Radical Photopolymerization

Eibel, A., Fast, D. E., Sattelkow, J., Zalibera, M., Wang, J., Huber, A., Müller, G., Neshchadin, D., Dietliker, K., Plank, H., et al. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201708274 · Cited by 43

A fast and powerful swimming microrobot with a serrated tail enhanced propulsion interface

Li, D., Liu, Y., Yang, Y., & Shen, Y. (2018) · Nanoscale · doi:10.1039/c8nr04907f · Cited by 43

Elevation and Azimuth Rotational Actuation of an Untethered Millirobot by MRI Gradient Coils

Erin, Ö., Gilbert, H. B., Tabak, A. F., & Sitti, M. (2019) · IEEE Transactions on Robotics · doi:10.1109/tro.2019.2934712 · Cited by 43

Real-time monitoring of two-photon photopolymerization for use in fabrication of microfluidic devices

Stoneman, M. R., Fox, M., Zeng, C., & Raicu, V. (2008) · Lab on a Chip · doi:10.1039/b816993d · Cited by 42

Ultrasound Tracking of the Acoustically Actuated Microswimmer

Chen, Q., Liu, F.-W., Xiao, Z., et al. (2019) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2019.2902523 · Cited by 39

Active Anion Delivery by Self-Propelled Microswimmers

Beladi‐Mousavi, S. M., Klein, J., Khezri, B., Walder, L., & Pumera, M. (2020) · ACS Nano · doi:10.1021/acsnano.9b09525 · Cited by 37

Conjugated Carbazole‐Based Schiff Bases as Photoinitiators: From Facile Synthesis to Efficient Two‐Photon Polymerization

Li, Z., Hu, P., Zhu, J., Gao, Y., Xiong, X., & Liu, R. (2018) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.29254 · Cited by 33

Hyaluronic acid vinyl esters: A toolbox toward controlling mechanical properties of hydrogels for 3D microfabrication

Zerobin, E., Marković, M., Tomášiková, Z., Qin, X., Ret, D., Steinbauer, P., Kitzmüller, J., Steiger, W., Gruber, P., Ovsianikov, A., et al. (2020) · Journal of Polymer Science · doi:10.1002/pol.20200073 · Cited by 29

Utilizing Iron's Attractive Chemical and Magnetic Properties in Microrocket Design, Extended Motion, and Unique Performance

Karshalev, E., Chen, C., Marolt, G., Martín, A., Campos, I., Castillo, R., Wu, T., & Wang, J. (2017) · Small · doi:10.1002/smll.201700035 · Cited by 28

Biocompatibility and cytotoxicity of novel photoinitiator π-conjugated dithienophosphole derivatives and their triggered polymers

Wang, S., Xiong, Y., Lalevée, J., Xiao, P., Liu, J., & Xing, F. (2019) · Toxicology in Vitro · doi:10.1016/j.tiv.2019.104720 · Cited by 26

Simultaneous printing and deformation of microsystems via two-photon lithography and holographic optical tweezers

Chizari, S., Shaw, L. A., & Hopkins, J. B. (2018) · Materials Horizons · doi:10.1039/c8mh01100a · Cited by 25

Fully 3D printed soft microactuators for soft microrobotics

Tyagi, M., Spinks, G. M., & Jager, E. W. H. (2020) · Smart Materials and Structures · doi:10.1088/1361-665x/ab9f48 · Cited by 25

Learning of Sub-optimal Gait Controllers for Magnetic Walking Soft Millirobots

Çulha, U., Demir, S. Ö., Trimpe, S., & Sitti, M. (2020) · Robotics: Science and Systems · doi:10.15607/rss.2020.xvi.070 · Cited by 25

Bioinspired interface design modulates pathogen and immunocyte responses in biomaterial-centered infection combination therapy

Li, J., Liu, W. X., Kilian, D., Zhang, X., Gelinsky, M., & Chu, P. K.-H. (2019) · Materials Horizons · doi:10.1039/c8mh01606b · Cited by 23

Artificial Tribotactic Microscopic Walkers: Walking Based on Friction Gradients

Steimel, J. P., Aragones, J. L., & Alexander‐Katz, A. (2014) · Physical Review Letters · doi:10.1103/physrevlett.113.178101 · Cited by 22

Cellular expression through morphogen delivery by light activated magnetic microrobots

Das, S., Hunter, E. E., DeLateur, N. A., Steager, E. B., Weiss, R., & Kumar, V. (2019) · Journal of Micro-Bio Robotics · doi:10.1007/s12213-019-00119-x · Cited by 21

A Realistic Simulation Environment for MRI-Based Robust Control of Untethered Magnetic Robots With Intra-Operational Imaging

Tiryaki, M. E., Erin, Ö., & Sitti, M. (2020) · IEEE Robotics and Automation Letters · doi:10.1109/lra.2020.3002213 · Cited by 19

Bipedal microwalkers actuated by oscillating magnetic fields

He, Y., Dong, S., Wang, L., Rong, W., & Sun, L. (2020) · Soft Matter · doi:10.1039/d0sm01228a · Cited by 18

Machine learning-enabled optimization of extrusion-based 3D printing

Rahmani Dabbagh, S., Ozcan, O., & Tasoglu, S. (2022) · Methods · doi:10.1016/j.ymeth.2022.08.002 · Cited by 94

Sensors-integrated organ-on-a-chip for biomedical applications

Chen, H., Luo, Z., Lin, X., Zhu, Y., & Zhao, Y. (2023) · Nano Research · doi:10.1007/s12274-023-5651-9 · Cited by 47

Engineered platelet cell motors for boosted cancer radiosensitization

Liu, W., Nie, H., Li, H., Liu, Y., Tian, M., Wang, S., Yang, Y., & Long, W. (2024) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2023.12.091 · Cited by 21

Emerging Functional Porous Scaffolds for Liver Tissue Engineering

Wang, J., Huang, D., Chen, D., Ren, H., & Zhao, Y. (2025) · Advanced Healthcare Materials · doi:10.1002/adhm.202403741 · Cited by 15