The DOI matches its Crossref record; 132 of the 132 references it cites were found in a registry or an index.
The rheology of direct and suspended extrusion bioprinting
Open accessAbstract
Bioprinting is a tool increasingly used in tissue engineering laboratories around the world. As an extension to classic tissue engineering, it enables high levels of control over the spatial deposition of cells, materials, and other factors. It is a field with huge promise for the production of implantable tissues and even organs, but the availability of functional bioinks is a barrier to success. Extrusion bioprinting is the most commonly used technique, where high-viscosity solutions of materials and cells are required to ensure good shape fidelity of the printed tissue construct. This is contradictory to hydrogels used in tissue engineering, which are generally of low viscosity prior to cross-linking to ensure cell viability, making them not directly translatable to bioprinting. This review provides an overview of the important rheological parameters for bioinks and methods to assess printability, as well as the effect of bioink rheology on cell viability. Developments over the last five years in bioink formulations and the use of suspended printing to overcome rheological limitations are then discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hydrogels in pharmaceutical formulations
Peppas, N. (2000) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/s0939-6411(00)00090-4 · Cited by 4,011
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Rheology of non-Newtonian fluids: A new flow equation for pseudoplastic systems
Cross, M. M. (1965) · Journal of Colloid Science · doi:10.1016/0095-8522(65)90022-x · Cited by 2,083
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting of collagen to rebuild components of the human heart
Lee, A., Hudson, A. R., Shiwarski, D. J., Tashman, J. W., Hinton, T. J., Yerneni, S., Bliley, J. M., Campbell, P. G., & Feinberg, A. W. (2019) · Science · doi:10.1126/science.aav9051 · Cited by 1,782
Barnes, H. A. (1997) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/s0377-0257(97)00004-9 · Cited by 1,535
Printability and shape fidelity of bioinks in 3D bioprinting
Schwab, A., Levato, R., D’Este, M., Piluso, S., Eglin, D., & Malda, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00084 · Cited by 1,359
Organ printing: computer-aided jet-based 3D tissue engineering
Mironov, V., Boland, T., Trusk, T., Forgacs, G., & Markwald, R. R. (2003) · Trends in Biotechnology · doi:10.1016/s0167-7799(03)00033-7 · Cited by 1,276
Progress in 3D bioprinting technology for tissue/organ regenerative engineering
Matai, I., Kaur, G., Seyedsalehi, A., McClinton, A., & Laurencin, C. T. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119536 · Cited by 1,156
Bioink properties before, during and after 3D bioprinting
Hölzl, K., Lin, S., Tytgat, L., Van Vlierberghe, S., Gu, L., & Ovsianikov, A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032002 · Cited by 1,070
Ouyang, L., Yao, R., Zhao, Y., & Sun, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035020 · Cited by 1,045
Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts
Noor, N., Shapira, A., Edri, R., Gal, I., Wertheim, L., & Dvir, T. (2019) · Advanced Science · doi:10.1002/advs.201900344 · Cited by 1,042
Billiet, T., Gevaert, E., De Schryver, T., Cornelissen, M., & Dubruel, P. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2013.09.078 · Cited by 1,015
Paxton, N., Smolan, W., Böck, T., Melchels, F., Groll, J., & Jungst, T. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8dd8 · Cited by 950
The role of macrophage phenotype in vascularization of tissue engineering scaffolds
Spiller, K. L., Anfang, R. R., Spiller, K. J., Ng, J., Nakazawa, K. R., Daulton, J. W., & Vunjak-Novakovic, G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.02.012 · Cited by 948
Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels
Skylar-Scott, M. A., Uzel, S. G. M., Nam, L. L., Ahrens, J. H., Truby, R. L., Damaraju, S., & Lewis, J. A. (2019) · Science Advances · doi:10.1126/sciadv.aaw2459 · Cited by 943
FLUID MECHANICS AND RHEOLOGY OF DENSE SUSPENSIONS
Stickel, J. J., & Powell, R. L. (2005) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.36.050802.122132 · Cited by 903
Williams, C. G., Malik, A. N., Kim, T. K., Manson, P. N., & Elisseeff, J. H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.04.024 · Cited by 899
Omnidirectional Printing of 3D Microvascular Networks
Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819
Blaeser, A., Duarte Campos, D. F., Puster, U., Richtering, W., Stevens, M. M., & Fischer, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500677 · Cited by 808
A definition of bioinks and their distinction from biomaterial inks
Groll, J., Burdick, J. A., Cho, D.-W., Derby, B., Gelinsky, M., Heilshorn, S. C., Jüngst, T., Malda, J., Mironov, V. A., Nakayama, K., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aaec52 · Cited by 797
Application of inkjet printing to tissue engineering
Boland, T., Xu, T., Damon, B., & Cui, X. (2006) · Biotechnology Journal · doi:10.1002/biot.200600081 · Cited by 783
Biofabrication: reappraising the definition of an evolving field
Groll, J., Boland, T., Blunk, T., Burdick, J. A., Cho, D.-W., Dalton, P. D., Derby, B., Forgacs, G., Li, Q., Mironov, V. A., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/013001 · Cited by 731
Aguado, B. A., Mulyasasmita, W., Su, J., Lampe, K. J., & Heilshorn, S. C. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0391 · Cited by 719
Reinforcement of hydrogels using three-dimensionally printed microfibres
Visser, J., Melchels, F. P. W., Jeon, J. E., van Bussel, E. M., Kimpton, L. S., Byrne, H. M., Dhert, W. J. A., Dalton, P. D., Hutmacher, D. W., & Malda, J. (2015) · Nature Communications · doi:10.1038/ncomms7933 · Cited by 718
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
Advanced Bioinks for 3D Printing: A Materials Science Perspective
Chimene, D., Lennox, K. K., Kaunas, R. R., & Gaharwar, A. K. (2016) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1638-y · Cited by 679
Writing in the granular gel medium
Bhattacharjee, T., Zehnder, S. M., Rowe, K. G., Jain, S., Nixon, R. M., Sawyer, W. G., & Angelini, T. E. (2015) · Science Advances · doi:10.1126/sciadv.1500655 · Cited by 635
Bio-ink properties and printability for extrusion printing living cells
Chung, J. H. Y., Naficy, S., Yue, Z., Kapsa, R., Quigley, A., Moulton, S. E., & Wallace, G. G. (2013) · Biomaterials Science · doi:10.1039/c3bm00012e · Cited by 610
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Ouyang, L., Highley, C. B., Rodell, C. B., Sun, W., & Burdick, J. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00158 · Cited by 607
Shear-thinning and self-healing hydrogels as injectable therapeutics and for 3D-printing
Loebel, C., Rodell, C. B., Chen, M. H., & Burdick, J. A. (2017) · Nature Protocols · doi:10.1038/nprot.2017.053 · Cited by 565
Opportunities and challenges of translational 3D bioprinting
Murphy, S. V., De Coppi, P., & Atala, A. (2019) · Nature Biomedical Engineering · doi:10.1038/s41551-019-0471-7 · Cited by 563
UV-induced DNA damage, repair, mutations and oncogenic pathways in skin cancer
de Gruijl, F. R., van Kranen, H. J., & Mullenders, L. H. F. (2001) · Journal of Photochemistry and Photobiology B: Biology · doi:10.1016/s1011-1344(01)00199-3 · Cited by 544
Gao, T., Gillispie, G. J., Copus, J. S., PR, A. K., Seol, Y.-J., Atala, A., Yoo, J. J., & Lee, S. J. (2018) · Biofabrication · doi:10.1088/1758-5090/aacdc7 · Cited by 510
Extrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks
Liu, W., Heinrich, M. A., Zhou, Y., Akpek, A., Hu, N., Liu, X., Guan, X., Zhong, Z., Jin, X., Khademhosseini, A., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601451 · Cited by 503
‘Printability' of Candidate Biomaterials for Extrusion Based 3D Printing: State‐of‐the‐Art
Kyle, S., Jessop, Z. M., Al‐Sabah, A., & Whitaker, I. S. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700264 · Cited by 495
Cartilage Tissue Engineering by the 3D Bioprinting of iPS Cells in a Nanocellulose/Alginate Bioink
Nguyen, D., Hägg, D. A., Forsman, A., Ekholm, J., Nimkingratana, P., Brantsing, C., Kalogeropoulos, T., Zaunz, S., Concaro, S., Brittberg, M., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-00690-y · Cited by 484
Faulkner-Jones, A., Fyfe, C., Cornelissen, D.-J., Gardner, J., King, J., Courtney, A., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044102 · Cited by 474
Linking Rheology and Printability for Dense and Strong Ceramics by Direct Ink Writing
M’Barki, A., Bocquet, L., & Stevenson, A. (2017) · Scientific Reports · doi:10.1038/s41598-017-06115-0 · Cited by 471
Daly, A. C., Davidson, M. D., & Burdick, J. A. (2021) · Nature Communications · doi:10.1038/s41467-021-21029-2 · Cited by 470
Recapitulating macro-scale tissue self-organization through organoid bioprinting
Brassard, J. A., Nikolaev, M., Hübscher, T., Hofer, M., & Lutolf, M. P. (2021) · Nature Materials · doi:10.1038/s41563-020-00803-5 · Cited by 469
Skardal, A., Zhang, J., & Prestwich, G. D. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.04.045 · Cited by 461
Jammed Microgel Inks for 3D Printing Applications
Highley, C. B., Song, K. H., Daly, A. C., & Burdick, J. A. (2019) · Advanced Science · doi:10.1002/advs.201801076 · Cited by 456
Assessing bioink shape fidelity to aid material development in 3D bioprinting
Ribeiro, A., Blokzijl, M. M., Levato, R., Visser, C. W., Castilho, M., Hennink, W. E., Vermonden, T., & Malda, J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa90e2 · Cited by 448
Crosslinked poly(vinyl alcohol) hydrogels as swollen elastic networks
Peppas, N. A., & Merrill, E. W. (1977) · Journal of Applied Polymer Science · doi:10.1002/app.1977.070210704 · Cited by 441
Bioprinting Technology: A Current State-of-the-Art Review
Dababneh, A. B., & Ozbolat, I. T. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028512 · Cited by 427
Assessment methodologies for extrusion-based bioink printability
Gillispie, G., Prim, P., Copus, J., Fisher, J., Mikos, A. G., Yoo, J. J., Atala, A., & Lee, S. J. (2020) · Biofabrication · doi:10.1088/1758-5090/ab6f0d · Cited by 426
Sun, W., Starly, B., Daly, A. C., Burdick, J. A., Groll, J., Skeldon, G., Shu, W., Sakai, Y., Shinohara, M., Nishikawa, M., et al. (2020) · Biofabrication · doi:10.1088/1758-5090/ab5158 · Cited by 426
Fundamentals and Applications of Photo-Cross-Linking in Bioprinting
Lim, K. S., Galarraga, J. H., Cui, X., Lindberg, G. C. J., Burdick, J. A., & Woodfield, T. B. F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00812 · Cited by 416
Crosslinking Strategies for 3D Bioprinting of Polymeric Hydrogels
GhavamiNejad, A., Ashammakhi, N., Wu, X. Y., & Khademhosseini, A. (2020) · Small · doi:10.1002/smll.202002931 · Cited by 400
Kapur, S., Baylink, D. J., & William Lau, K.-H. (2003) · Bone · doi:10.1016/s8756-3282(02)00979-1 · Cited by 364
Mouser, V. H. M., Melchels, F. P. W., Visser, J., Dhert, W. J. A., Gawlitta, D., & Malda, J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035003 · Cited by 359
Gao, G., Schilling, A. F., Yonezawa, T., Wang, J., Dai, G., & Cui, X. (2014) · Biotechnology Journal · doi:10.1002/biot.201400305 · Cited by 351
Lee, V. K., Lanzi, A. M., Ngo, H., Yoo, S.-S., Vincent, P. A., & Dai, G. (2014) · Cellular and Molecular Bioengineering · doi:10.1007/s12195-014-0340-0 · Cited by 342
3D Printability of Alginate-Carboxymethyl Cellulose Hydrogel
Habib, A., Sathish, V., Mallik, S., & Khoda, B. (2018) · Materials · doi:10.3390/ma11030454 · Cited by 330
Lee, H., Han, W., Kim, H., Ha, D.-H., Jang, J., Kim, B. S., & Cho, D.-W. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.6b01908 · Cited by 328
Review: Bioprinting: A Beginning
Mironov, V., Reis, N., & Derby, B. (2006) · Tissue Engineering · doi:10.1089/ten.2006.12.631 · Cited by 319
Zhao, Y., Li, Y., Mao, S., Sun, W., & Yao, R. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045002 · Cited by 312
Mauck, R. L., Wang, C. C.-B., Oswald, E. S., Ateshian, G. A., & Hung, C. T. (2003) · Osteoarthritis and Cartilage · doi:10.1016/j.joca.2003.08.006 · Cited by 310
Current Biomedical Applications of 3D Printing and Additive Manufacturing
Ahangar, P., Cooke, M. E., Weber, M. H., & Rosenzweig, D. H. (2019) · Applied Sciences · doi:10.3390/app9081713 · Cited by 309
Self-citation3D Bioprinting a Cell-Laden Bone Matrix for Breast Cancer Metastasis Study
Zhou, X., Zhu, W., Nowicki, M., Miao, S., Cui, H., Holmes, B., Glazer, R. I., & Zhang, L. G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10673 · Cited by 307
Development of a clay based bioink for 3D cell printing for skeletal application
Ahlfeld, T., Cidonio, G., Kilian, D., Duin, S., Akkineni, A. R., Dawson, J. I., Yang, S., Lode, A., Oreffo, R. O. C., & Gelinsky, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7e96 · Cited by 301
Kesti, M., Müller, M., Becher, J., Schnabelrauch, M., D’Este, M., Eglin, D., & Zenobi-Wong, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.033 · Cited by 294
Expanding and optimizing 3D bioprinting capabilities using complementary network bioinks
Ouyang, L., Armstrong, J. P. K., Lin, Y., Wojciechowski, J. P., Lee-Reeves, C., Hachim, D., Zhou, K., Burdick, J. A., & Stevens, M. M. (2020) · Science Advances · doi:10.1126/sciadv.abc5529 · Cited by 293
3D Printing in Suspension Baths: Keeping the Promises of Bioprinting Afloat
McCormack, A., Highley, C. B., Leslie, N. R., & Melchels, F. P. W. (2020) · Trends in Biotechnology · doi:10.1016/j.tibtech.2019.12.020 · Cited by 284
Aspiration-assisted bioprinting for precise positioning of biologics
Ayan, B., Heo, D. N., Zhang, Z., Dey, M., Povilianskas, A., Drapaca, C., & Ozbolat, I. T. (2020) · Science Advances · doi:10.1126/sciadv.aaw5111 · Cited by 283
Self-assembled micro-organogels for 3D printing silicone structures
O’Bryan, C. S., Bhattacharjee, T., Hart, S., Kabb, C. P., Schulze, K. D., Chilakala, I., Sumerlin, B. S., Sawyer, W. G., & Angelini, T. E. (2017) · Science Advances · doi:10.1126/sciadv.1602800 · Cited by 277
Controlling polymer properties through the shape of the molecular-weight distribution
Gentekos, D. T., Sifri, R. J., & Fors, B. P. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0138-8 · Cited by 272
Diamantides, N., Wang, L., Pruiksma, T., Siemiatkoski, J., Dugopolski, C., Shortkroff, S., Kennedy, S., & Bonassar, L. J. (2017) · Biofabrication · doi:10.1088/1758-5090/aa780f · Cited by 250
Viscoplastic Matrix Materials for Embedded 3D Printing
Grosskopf, A. K., Truby, R. L., Kim, H., Perazzo, A., Lewis, J. A., & Stone, H. A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19818 · Cited by 243
Extrusion bioprinting of soft materials: An emerging technique for biological model fabrication
Jiang, T., Munguia-Lopez, J. G., Flores-Torres, S., Kort-Mascort, J., & Kinsella, J. M. (2019) · Applied Physics Reviews · doi:10.1063/1.5059393 · Cited by 243
Complex 3D‐Printed Microchannels within Cell‐Degradable Hydrogels
Song, K. H., Highley, C. B., Rouff, A., & Burdick, J. A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801331 · Cited by 241
Cidonio, G., Glinka, M., Dawson, J. I., & Oreffo, R. O. C. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.04.009 · Cited by 238
Complexation-induced resolution enhancement of 3D-printed hydrogel constructs
Gong, J., Schuurmans, C. C. L., Genderen, A. M. V., Cao, X., Li, W., Cheng, F., He, J. J., López, A., Huerta, V., Manríquez, J., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-14997-4 · Cited by 233
Duarte Campos, D. F., Blaeser, A., Weber, M., Jäkel, J., Neuss, S., Jahnen-Dechent, W., & Fischer, H. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015003 · Cited by 224
Dynamic Bioinks to Advance Bioprinting
Morgan, F. L. C., Moroni, L., & Baker, M. B. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901798 · Cited by 223
Jeon, O., Lee, Y. B., Jeong, H., Lee, S. J., Wells, D., & Alsberg, E. (2019) · Materials Horizons · doi:10.1039/c9mh00375d · Cited by 221
Townsend, J. M., Beck, E. C., Gehrke, S. H., Berkland, C. J., & Detamore, M. S. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.01.003 · Cited by 215
Evaluation of bioink printability for bioprinting applications
Zhang, Z., Jin, Y., Yin, J., Xu, C., Xiong, R., Christensen, K., Ringeisen, B. R., Chrisey, D. B., & Huang, Y. (2018) · Applied Physics Reviews · doi:10.1063/1.5053979 · Cited by 214
Polymer viscosity in concentrated solutions
Freed, K. F., & Edwards, S. F. (1974) · The Journal of Chemical Physics · doi:10.1063/1.1682545 · Cited by 197
Riddle, R. C., Taylor, A. F., Genetos, D. C., & Donahue, H. J. (2006) · American Journal of Physiology-Cell Physiology · doi:10.1152/ajpcell.00082.2005 · Cited by 193
Supramolecular Guest–Host Interactions for the Preparation of Biomedical Materials
Rodell, C. B., Mealy, J. E., & Burdick, J. A. (2015) · Bioconjugate Chemistry · doi:10.1021/acs.bioconjchem.5b00483 · Cited by 187
Study of Droplet Formation Process during Drop-on-Demand Inkjetting of Living Cell-Laden Bioink
Xu, C., Zhang, M., Huang, Y., Ogale, A., Fu, J., & Markwald, R. R. (2014) · Langmuir · doi:10.1021/la501430x · Cited by 184
Lee, J., Oh, S. J., An, S. H., Kim, W.-D., & Kim, S.-H. (2020) · Biofabrication · doi:10.1088/1758-5090/ab8707 · Cited by 184
Hydrogel swelling behavior and its biomedical applications
Holback, H., Yeo, Y., & Park, K. (2011) · Elsevier eBooks · doi:10.1533/9780857091383.1.3 · Cited by 179
Emmermacher, J., Spura, D., Cziommer, J., Kilian, D., Wollborn, T., Fritsching, U., Steingroewer, J., Walther, T., Gelinsky, M., & Lode, A. (2020) · Biofabrication · doi:10.1088/1758-5090/ab7553 · Cited by 167
3D bioprinting via an in situ crosslinking technique towards engineering cartilage tissue
Galarraga, J. H., Kwon, M. Y., & Burdick, J. A. (2019) · Scientific Reports · doi:10.1038/s41598-019-56117-3 · Cited by 163
Granular gel support-enabled extrusion of three-dimensional alginate and cellular structures
Jin, Y., Compaan, A., Bhattacharjee, T., & Huang, Y. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025016 · Cited by 161
3D Bioprinting of Macroporous Materials Based on Entangled Hydrogel Microstrands
Kessel, B., Lee, M., Bonato, A., Tinguely, Y., Tosoratti, E., & Zenobi‐Wong, M. (2020) · Advanced Science · doi:10.1002/advs.202001419 · Cited by 160
3D Bioprinting of Methylcellulose/Gelatin-Methacryloyl (MC/GelMA) Bioink with High Shape Integrity
Rastin, H., Ormsby, R. T., Atkins, G. J., & Losic, D. (2020) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c00169 · Cited by 159
Jin, Y., Chai, W., & Huang, Y. (2017) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.05.144 · Cited by 158
Three-dimensional printing with sacrificial materials for soft matter manufacturing
O’Bryan, C. S., Bhattacharjee, T., Niemi, S. R., Balachandar, S., Baldwin, N., Ellison, S. T., Taylor, C. R., Sawyer, W. G., & Angelini, T. E. (2017) · MRS Bulletin · doi:10.1557/mrs.2017.167 · Cited by 150
Dynamic Coordination Chemistry Enables Free Directional Printing of Biopolymer Hydrogel
Shi, L., Carstensen, H., Hölzl, K., Lunzer, M., Li, H., Hilborn, J. G., Ovsianikov, A., & Ossipov, D. A. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00128 · Cited by 148
Processing and Properties of Chitosan Inks for 3D Printing of Hydrogel Microstructures
Wu, Q., Therriault, D., & Heuzey, M. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00415 · Cited by 147
Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting
Compaan, A. M., Song, K., & Huang, Y. H. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b13792 · Cited by 143
Jiang, T., Munguia-López, J. G., Flores-Torres, S., Grant, J., Vijayakumar, S., León‐Rodríguez, A. D., & Kinsella, J. M. (2017) · Scientific Reports · doi:10.1038/s41598-017-04691-9 · Cited by 141
Large volume syringe pump extruder for desktop 3D printers
Pusch, K. M., Hinton, T. J., & Feinberg, A. W. (2018) · HardwareX · doi:10.1016/j.ohx.2018.02.001 · Cited by 137
Designing and transforming yield-stress fluids
Nelson, A. Z., Schweizer, K. S., Rauzan, B. M., Nuzzo, R. G., Vermant, J., & Ewoldt, R. H. (2019) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2019.06.002 · Cited by 135
Fabrication of Complex Hydrogel Structures Using Suspended Layer Additive Manufacturing (SLAM)
Senior, J. J., Cooke, M. E., Grover, L. M., & Smith, A. M. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201904845 · Cited by 134
Self-citationSuspended Manufacture of Biological Structures
Moxon, S. R., Cooke, M. E., Cox, S. C., Snow, M., Jeys, L. M., Jones, S. W., Smith, A. M., & Grover, L. M. (2017) · Advanced Materials · doi:10.1002/adma.201605594 · Cited by 133
Self-citationHigh density cell seeding affects the rheology and printability of collagen bioinks
Diamantides, N., Dugopolski, C., Blahut, E., Kennedy, S. M., & Bonassar, L. J. (2019) · Biofabrication · doi:10.1088/1758-5090/ab3524 · Cited by 130
Ouyang, L., Yao, R., Chen, X., Na, J., & Sun, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/1/015010 · Cited by 120
Photocrosslinking-based bioprinting: Examining crosslinking schemes
Knowlton, S. M., Yenilmez, B., Anand, S., & Taşoğlu, S. (2017) · Bioprinting · doi:10.1016/j.bprint.2017.03.001 · Cited by 120
A Thermogelling Supramolecular Hydrogel with Sponge-Like Morphology as a Cytocompatible Bioink
Lorson, T., Jaksch, S., Lübtow, M. M., Jüngst, T., Gröll, J., Lühmann, T. C., & Luxenhofer, R. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00481 · Cited by 114
Colloidal Liquid Crystals Confined to Synthetic Tactoids
Gârlea, I. C., Dammone, O., Alvarado, J., Notenboom, V., Jia, Y., Koenderink, G. H., Aarts, D. G. A. L., Lettinga, M. P., & Mulder, B. M. (2019) · Scientific Reports · doi:10.1038/s41598-019-56729-9 · Cited by 112
Hydrodynamically Guided Hierarchical Self‐Assembly of Peptide–Protein Bioinks
Hedegaard, C. L., Collin, E. C., Redondo‐Gómez, C., Nguyen, L. T. H., Ng, K. W., Castrejón-Pita, A. A., Castrejón-Pita, J. R., & Mata, Á. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201703716 · Cited by 107
Supramolecular Polymer Networks and Gels
Seiffert, S. (2015) · Advances in polymer science · doi:10.1007/978-3-319-15404-6 · Cited by 102
Process-induced cell damage: pneumatic versus screw-driven bioprinting
Ning, L., Yang, B., Mohabatpour, F., Betancourt, N., Sarker, M. D., Papagerakis, P., & Chen, D. (2019) · Biofabrication · doi:10.1088/1758-5090/ab5f53 · Cited by 98
Filling the Gap: A Correlation between Objective and Subjective Measures of Injectability
Robinson, T. E., Hughes, E. A. B., Bose, A., Cornish, E. A., Teo, J. Y., Eisenstein, N., Grover, L. M., & Cox, S. C. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901521 · Cited by 98
Printing bone in a gel: using nanocomposite bioink to print functionalised bone scaffolds
Cidonio, G., Cooke, M. E., Glinka, M., Dawson, J. I., Grover, L. M., & Oreffo, R. O. C. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100028 · Cited by 97
Self-citationHeo, D. N., Alioglu, M. A., Wu, Y. B., Özbolat, V., Ayan, B., Dey, M., Kang, Y.-N., & Ozbolat, I. T. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c05096 · Cited by 97
Rheological Behavior of Fugitive Organic Inks for Direct-Write Assembly
Therriault, D., White, S. R., & Lewis, J. A. (2007) · Applied Rheology · doi:10.1515/arh-2007-0001 · Cited by 94
Freeform 3D printing using a continuous viscoelastic supporting matrix
Patrício, S. G., Sousa, L. R., Correia, T. R., Gaspar, V. M., Pires, L. S. O., Luís, J. L., Oliveira, J. M., & Mano, J. F. (2020) · Biofabrication · doi:10.1088/1758-5090/ab8bc3 · Cited by 93
Structuring of Hydrogels across Multiple Length Scales for Biomedical Applications
Cooke, M. E., Jones, S. W., ter Horst, B., Moiemen, N. S., Snow, M., Chouhan, G., Hill, L. J., Esmaeli, M., Moakes, R. J. A., Holton, J., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705013 · Cited by 91
Self-citationAlcala‐Orozco, C. R., Mutreja, I., Cui, X., Kumar, D., Hooper, G. J., Lim, K. S., & Woodfield, T. B. F. (2019) · Bioprinting · doi:10.1016/j.bprint.2019.e00073 · Cited by 88
Compaan, A. M., Song, K., Chai, W., & Huang, Y. H. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b15451 · Cited by 82
Melt Electrospinning Writing Process Guided by a “Printability Number”
Tourlomousis, F., Ding, H., Kalyon, D. M., & Chang, R. C. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4036348 · Cited by 70
Han, W. T., Jang, T., Chen, S., Chong, L. S. H., Jung, H., & Song, J. (2019) · Biomaterials Science · doi:10.1039/c9bm01347d · Cited by 67
Multivalency Enables Dynamic Supramolecular Host–Guest Hydrogel Formation
Ooi, H. W., Kocken, J. M. M., Morgan, F. L. C., Malheiro, A., Zoetebier, B., Karperien, M., Wieringa, P. A., Dijkstra, P. J., Moroni, L., & Baker, M. B. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.0c00148 · Cited by 67
Sustained release of decorin to the surface of the eye enables scarless corneal regeneration
Hill, L. J., Moakes, R. J. A., Vareechon, C., Butt, G. F., Ng, A., Brock, K., Chouhan, G., Vincent, R. C., Abbondante, S., Williams, R. L., et al. (2018) · npj Regenerative Medicine · doi:10.1038/s41536-018-0061-4 · Cited by 64
Lee, M., Bae, K., Levinson, C., & Zenobi‐Wong, M. (2020) · Biofabrication · doi:10.1088/1758-5090/ab782d · Cited by 62
Microfluidic assessment of mechanical cell damage by extensional stress.
Bae, Y. B., Jang, H., Shin, T., Phukan, G., Tran, T. T., Lee, G., Hwang, W., & Kim, J. M. (2016) · Lab on a Chip · doi:10.1039/c5lc01006c · Cited by 58
Maisonneuve, B. G. C., Roux, D. C. D., Thorn, P., & Cooper-White, J. J. (2013) · Biomacromolecules · doi:10.1021/bm401335g · Cited by 46
Swelling thermodynamics and phase transitions of polymer gels
Dimitriyev, M. S., Chang, Y.-W., Goldbart, P. M., & Fernández‐Nieves, A. (2019) · Nano Futures · doi:10.1088/2399-1984/ab45d5 · Cited by 44
3D Printed Polyurethane Scaffolds for the Repair of Bone Defects
Cooke, M. E., Ramírez-GarcíaLuna, J. L., Rangel-Berridi, K., Park, H., Nazhat, S. N., Weber, M. H., Henderson, J. E., & Rosenzweig, D. H. (2020) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2020.557215 · Cited by 44
Self-citationBasic Concepts in Polymer Melt Rheology and Their Importance in Processing
Vlachopoulos, J., & Polychronopoulos, N. D. (2011) · doi:10.1002/9781118140611.ch1 · Cited by 41
Heterotypic tumor models through freeform printing into photostabilized granular microgels
Molley, T. G., Jalandhra, G. K., Nemec, S. R., Tiffany, A. S., Patkunarajah, A., Poole, K., Harley, B. A. C., Hung, T., & Kilian, K. A. (2021) · Biomaterials Science · doi:10.1039/d1bm00574j · Cited by 37
Jin, Y., Chai, W., & Huang, Y. H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b09177 · Cited by 32
Freeform printing of heterotypic tumor models within cell-laden microgel matricesPreprint
Molley, T. G., Jalandhra, G. K., Nemec, S. R., Tiffany, A. S., Harley, B. A. C., Hung, T., & Kilian, K. A. (2020) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/2020.08.30.274654 · Cited by 1
Cited by
Self-Healing Injectable Hydrogels for Tissue Regeneration
Bertsch, P., Diba, M., Mooney, D. J., & Leeuwenburgh, S. C. G. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00179 · Cited by 892
Gelatin methacryloyl hydrogel, from standardization, performance, to biomedical application
He, J., Sun, Y., Gao, Q., He, C., Yao, K., Wang, T., Xie, M., Yu, K., Nie, J., Chen, Y., et al. (2023) · Advanced Healthcare Materials · doi:10.1002/adhm.202300395 · Cited by 275
Bom, S., Ribeiro, R., Ribeiro, H. M., Santos, C., & Marto, J. (2022) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2022.121506 · Cited by 230
Rheological, structural, and biological trade-offs in bioink design for 3D bioprinting
Elango, J., & Zamora-Ledezma, C. (2025) · Gels · doi:10.3390/gels11080659 · Cited by 75
Constructing biomimetic liver models through biomaterials and vasculature engineering
Lv, W., Zhou, H., Aazmi, A., Yu, M., Xu, X., Yang, H., Huang, Y. Y. S., & Ma, L. (2022) · Regenerative Biomaterials · doi:10.1093/rb/rbac079 · Cited by 45
Metadata
- Authors
- Cooke, M. E., & Rosenzweig, D. H.
- Venue
- APL Bioengineering
- Publisher
- AIP Publishing
- Published
- 2021-02-04
- Volume
- 5
- Issue
- 1
- Pages
- 011502-011502
- ISSN
- 2473-2877 (ISSN-L)
- OpenAlex
- W3126242426
- Cited by
- 284
- References
- 132
- FWCI
- 12.46
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.