The DOI matches its Crossref record.
Silicon as a mechanical material
Abstract
Single-crystal silicon is being increasingly employed in a variety of new commercial products not because of its well-established electronic properties, but rather because of its excellent mechanical properties. In addition, recent trends in the engineering literature indicate a growing interest in the use of silicon as a mechanical material with the ultimate goal of developing a broad range of inexpensive, batch-fabricated, high-performance sensors and transducers which are easily interfaced with the rapidly proliferating microprocessor. This review describes the advantages of employing silicon as a mechanical material, the relevant mechanical characteristics of silicon, and the processing techniques which are specific to micromechanical structures. Finally, the potentials of this new technology are illustrated by numerous detailed examples from the literature. It is clear that silicon will continue to be aggressively exploited in a wide variety of mechanical applications complementary to its traditional role as an electronic material. Furthermore, these multidisciplinary uses of silicon will significantly alter the way we think about all types of miniature mechanical devices and components.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Binnig, G., Quate, C. F., & Gerber, C. (1986) · Physical Review Letters · doi:10.1103/physrevlett.56.930 · Cited by 14,762
One‐Dimensional Nanostructures: Synthesis, Characterization, and Applications
Xia, Y., Yang, P., Sun, Y., Wu, Y., Mayers, B., Gates, B., Yin, Y., Kim, F., & Yan, H. (2003) · Advanced Materials · doi:10.1002/adma.200390087 · Cited by 8,559
What is the Young's Modulus of Silicon?
Hopcroft, M. A., Nix, W. D., & Kenny, T. W. (2010) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2009.2039697 · Cited by 2,119
Evidence for van der Waals adhesion in gecko setae
Autumn, K., Sitti, M., Liang, Y. A., Peattie, A. M., Hansen, W. R., Sponberg, S., Kenny, T. W., Fearing, R., Israelachvili, J. N., & Full, R. J. (2002) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.192252799 · Cited by 1,949
Laser, D. J., & Santiago, J. G. (2004) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/14/6/r01 · Cited by 1,848
MICRO-ELECTRO-MECHANICAL-SYSTEMS (MEMS) AND FLUID FLOWS
Ho, C.-M., & Tai, Y.-C. (1998) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.30.1.579 · Cited by 1,254
Capillary electrophoresis and sample injection systems integrated on a planar glass chip
Harrison, D. J., Manz, A., Fan, Z., Luedi, H., & Widmer, H. M. (1992) · Analytical Chemistry · doi:10.1021/ac00041a030 · Cited by 1,226
Manz, A., Harrison, D. J., Verpoorte, E. M. J., Fettinger, J. C., Paulus, A., Lüdi, H., & Widmer, H. M. (1992) · Journal of Chromatography A · doi:10.1016/0021-9673(92)80293-4 · Cited by 1,042
Controlled microfluidic interfaces
Atencia, J., & Beebe, D. J. (2005) · Nature · doi:10.1038/nature04163 · Cited by 1,006
Evolution of Microchannel Flow Passages--Thermohydraulic Performance and Fabrication Technology
Kandlikar, S. G., & Grande, W. J. (2003) · Heat Transfer Engineering · doi:10.1080/01457630304040 · Cited by 960
Review: Semiconductor Piezoresistance for Microsystems
Barlian, A. A., Park, W.-T., Mallon, J. R., Rastegar, A. J., & Pruitt, B. L. (2009) · Proceedings of the IEEE · doi:10.1109/jproc.2009.2013612 · Cited by 949
Microelectromechanical systems (MEMS): fabrication, design and applications
Judy, J. W. (2001) · Smart Materials and Structures · doi:10.1088/0964-1726/10/6/301 · Cited by 828
A sub-40-mHz-linewidth laser based on a silicon single-crystal optical cavity
Kessler, T., Hagemann, C., Grebing, C., Legero, T., Sterr, U., Riehle, F., Martin, M. J., Chen, L., & Ye, J. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.217 · Cited by 754
Bulk micromachining of silicon
Kovacs, G. T. A., Maluf, N. I., & Petersen, K. E. (1998) · Proceedings of the IEEE · doi:10.1109/5.704259 · Cited by 733
Self-citationAn Introduction to Microelectromechanical Systems Engineering
Maluf, N. (2002) · Measurement Science and Technology · doi:10.1088/0957-0233/13/2/701 · Cited by 694
Wireless Implantable Microsystems: High-Density Electronic Interfaces to the Nervous System
Wise, K. D., Anderson, D. J., Hetke, J. F., Kipke, D. R., & Najafi, K. (2004) · Proceedings of the IEEE · doi:10.1109/jproc.2003.820544 · Cited by 656
Etch rates for micromachining processing
Williams, K. R., & Muller, R. S. (1996) · Journal of Microelectromechanical Systems · doi:10.1109/84.546406 · Cited by 646
A piezoelectric micropump based on micromachining of silicon
van Lintel, H. T. G., van De Pol, F. C. M., & Bouwstra, S. (1988) · Sensors and Actuators · doi:10.1016/0250-6874(88)87005-7 · Cited by 620
Design of multiphysics actuators using topology optimization – Part I: One-material structures
Sigmund, O. (2001) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(01)00251-1 · Cited by 613
Micromachined pressure sensors: review and recent developments
Eaton, W. P., & Smith, J. H. (1997) · Smart Materials and Structures · doi:10.1088/0964-1726/6/5/004 · Cited by 593
Attogram detection using nanoelectromechanical oscillators
Ilic, B., Craighead, H. G., Krylov, S., Senaratne, W., Ober, C., & Neuzil, P. (2004) · Journal of Applied Physics · doi:10.1063/1.1650542 · Cited by 585
Abgrall, P., & Gué, A.-M. (2007) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/17/5/r01 · Cited by 561
Atomic Resolution with Atomic Force Microscope
Binnig, G., Gerber, C., Stoll, E., Albrecht, T. R., & Quate, C. F. (1987) · Europhysics Letters (EPL) · doi:10.1209/0295-5075/3/12/006 · Cited by 559
Soft Actuators for Soft Robotic Applications: A Review
El-Atab, N., Mishra, R. B., Al-Modaf, F., Joharji, L., Alsharif, A. A., Alamoudi, H., Diaz, M., Qaiser, N., & Hussain, M. M. (2020) · Advanced Intelligent Systems · doi:10.1002/aisy.202000128 · Cited by 552
Verpoorte, E., & De Rooij, N. F. (2003) · Proceedings of the IEEE · doi:10.1109/jproc.2003.813570 · Cited by 503
BioMEMS: state-of-the-art in detection, opportunities and prospects
Bashir, R. (2004) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2004.03.002 · Cited by 462
Binnig, G., Quate, C. F., & Gerber, C. (1993) · Perspectives in Condensed Matter Physics · doi:10.1007/978-94-011-1812-5_4 · Cited by 452
Single cell detection with micromechanical oscillators
Ilic, B., Czaplewski, D., Zalalutdinov, M., Craighead, H. G., Neuzil, P., Campagnolo, C., & Batt, C. (2001) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.1421572 · Cited by 443
Recent Developments in Polymer MEMS
Liu, C. (2007) · Advanced Materials · doi:10.1002/adma.200701709 · Cited by 422
Microrobots and micromechanical systems
Trimmer, W. S. N. (1989) · Sensors and Actuators · doi:10.1016/0250-6874(89)87079-9 · Cited by 414
Piezoresistivity and Strain-induced Band Gap Tuning in Atomically Thin MoS2
Manzeli, S., Allain, A., Ghadimi, A., & Kis, A. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b01689 · Cited by 385
A glass/silicon composite intracortical electrode array
Jones, K. E., Campbell, P. K., & Normann, R. A. (1992) · Annals of Biomedical Engineering · doi:10.1007/bf02368134 · Cited by 354
Levchenko, I., Bazaka, K., Ding, Y., Raitses, Y., Mazouffre, S., Henning, T., Klar, P. J., Shinohara, S., Schein, J., Garrigues, L., et al. (2018) · Applied Physics Reviews · doi:10.1063/1.5007734 · Cited by 349
Microfabrication in Biology and Medicine
Voldman, J., Gray, M. L., & Schmidt, M. A. (1999) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.1.1.401 · Cited by 344
Liquid transport in micron and submicron channels
Pfahler, J., Harley, J., Bau, H., & Zemel, J. (1990) · Sensors and Actuators A: Physical · doi:10.1016/0924-4247(89)80008-1 · Cited by 327
Reconfigurable nanomechanical photonic metamaterials
Zheludev, N. I., & Plum, E. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.302 · Cited by 324
Biosensing using dynamic-mode cantilever sensors: A review
Johnson, B. N., & Mutharasan, R. (2012) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2011.10.054 · Cited by 314
Application of Micro- and Nano-Electromechanical Devices to Drug Delivery
Staples, M., Daniel, K., Cima, M. J., & Langer, R. (2006) · Pharmaceutical Research · doi:10.1007/s11095-006-9906-4 · Cited by 311
Nonlinear Dynamics and Its Applications in Micro- and Nanoresonators
Rhoads, J. F., Shaw, S. W., & Turner, K. L. (2010) · Journal of Dynamic Systems, Measurement, and Control · doi:10.1115/1.4001333 · Cited by 302
Stemme, G. (1991) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/1/2/004 · Cited by 292
Measuring fracture toughness of coatings using focused-ion-beam-machined microbeams
Di Maio, D., & Roberts, S. G. (2005) · Journal of Materials Research · doi:10.1557/jmr.2005.0048 · Cited by 284
Pister, K. S. J., Judy, M. W., Burgett, S. R., & Fearing, R. S. (1992) · Sensors and Actuators A: Physical · doi:10.1016/0924-4247(92)80172-y · Cited by 279
Diffusion-based extraction in a microfabricated device
Brody, J. P., & Yager, P. (1997) · Sensors and Actuators A: Physical · doi:10.1016/s0924-4247(97)80219-1 · Cited by 278
Xia, Y., & Whitesides, G. M. (1998) · Angewandte Chemie · doi:10.1002/(sici)1521-3757(19980302)110:5<568::aid-ange568>3.0.co;2-x · Cited by 267
Micromachining for optical and optoelectronic systems
Wu, M. C. (1997) · Proceedings of the IEEE · doi:10.1109/5.649660 · Cited by 264
Kumar, S. S., & Pant, B. D. (2014) · Microsystem Technologies · doi:10.1007/s00542-014-2215-7 · Cited by 252
A Path Beyond Metal and Silicon:Polymer/Nanomaterial Composites for Stretchable Strain Sensors
Qiu, A., Li, P., Yang, Z., Yao, Y., Lee, I., & Ma, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806306 · Cited by 237
Microsensor Integration Into Systems-on-Chip
Brand, O. (2006) · Proceedings of the IEEE · doi:10.1109/jproc.2006.873618 · Cited by 106
Fabrication and characteristics of an implantable, polymer-based, intrafascicular electrode
Lawrence, S. M., Dhillon, G. S., & Horch, K. W. (2003) · Journal of Neuroscience Methods · doi:10.1016/s0165-0270(03)00231-0 · Cited by 93
Whole-cell biochips for bio-sensing: integration of live cells and inanimate surfaces
Ben-Yoav, H., Melamed, S., Freeman, A., Shacham-Diamand, Y., & Belkin, S. (2011) · Critical Reviews in Biotechnology · doi:10.3109/07388551.2010.532767 · Cited by 52
Material Fatigue and Reliability of MEMS Accelerometers
Xiong, X., Wu, Y.-L., & Jone, W.-B. (2008) · 2008 IEEE International Symposium on Defect and Fault Tolerance of VLSI Systems · doi:10.1109/dft.2008.37 · Cited by 33
Firebaugh, S. L., & Piepmeier, J. A. (2008) · IEEE Transactions on Education · doi:10.1109/te.2008.919699 · Cited by 14
Self Heating in Piezoresistive Pressure Sensors at Cryogenic Temperatures
Hershberg, E. L., & Lyngdal, J. W. (1994) · Advances in Cryogenic Engineering · doi:10.1007/978-1-4615-2522-6_137 · Cited by 1
Liu, H., Nair, S. V., Gu, H., Yang, B., Wu, J., Yan, X., Lv, R., Dong, J., Yu, Y., Xu, T., et al. (2026) · Solar Energy · doi:10.1016/j.solener.2025.114206
Metadata
- Authors
- Petersen, K. E.
- Venue
- Proceedings of the IEEE
- Published
- 1982-05
- Volume
- 70
- Issue
- 5
- Pages
- 420-457
- ISSN
- 0018-9219 (ISSN-L)
- 1558-2256
- OpenAlex
- W2137178805
- Cited by
- 2,902
- References
- 0
- FWCI
- 14.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.