The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
A High Efficiency 5 kW Inductive Charger for EVs Using Dual Side Control
Abstract
This paper presents the design of a 5 kW inductive charging system for electric vehicles (EVs). Over 90% efficiency is maintained from grid to battery across a wide range of coupling conditions at full load. Experimental measurements show that the magnetic field strength meets the stringent International Commission on Non-Ionizing Radiation Protection (ICNIRP) guidelines for human safety. In addition, a new dual side control scheme is proposed to optimize system level efficiency. Experimental validation showed that a 7% efficiency increase and 25% loss reduction under light load conditions is achievable. The authors believe this paper is the first to show such high measured efficiencies for a level 2 inductive charging system. Performance of this order would indicate that inductive charging systems are reasonably energy efficient when compared to the efficiency of plug-in charging systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The state of the art of electric, hybrid, and fuel cell vehicles
Chan, C. C. (2007) · Proceedings of the IEEE · doi:10.1109/jproc.2007.892489 · Cited by 1,987
Design Considerations for a Contactless Electric Vehicle Battery Charger
Wang, C.-S., Stielau, O. H., & Covic, G. A. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.855672 · Cited by 1,487
Design and Optimization of Circular Magnetic Structures for Lumped Inductive Power Transfer Systems
Budhia, M., Covic, G. A., & Boys, J. T. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2143730 · Cited by 1,039
A Frequency Control Method for Regulating Wireless Power to Implantable Devices
Si, P., Hu, A. P., Malpas, S., & Budgett, D. (2008) · IEEE Transactions on Biomedical Circuits and Systems · doi:10.1109/tbcas.2008.918284 · Cited by 582
Stability and control of inductivelycoupled power transfer systems
Boys, J. T., Covic, G. A., & Green, A. W. (2000) · IEE Proceedings - Electric Power Applications · doi:10.1049/ip-epa:20000017 · Cited by 559
Musavi, F., Eberle, W., & Dunford, W. G. (2011) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2011.2156753 · Cited by 376
A Unity-Power-Factor IPT Pickup for High-Power Applications
Keeling, N. A., Covic, G. A., & Boys, J. T. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2027255 · Cited by 371
Design of loosely coupled inductive power transfer systems
Stielau, O. H., & Covic, G. A. (2002) · PowerCon 2000. 2000 International Conference on Power System Technology. Proceedings (Cat. No.00EX409) · doi:10.1109/icpst.2000.900036 · Cited by 328
On-Line Electric Vehicle using inductive power transfer system
Lee, S., Huh, J., Park, C., Choi, N.-S., Cho, G.-H., & Rim, C.-T. (2010) · 2010 IEEE Energy Conversion Congress and Exposition · doi:10.1109/ecce.2010.5618092 · Cited by 277
Analysis and Design of an LCL-T Resonant Converter as a Constant-Current Power Supply
Borage, M., Tiwari, S., & Kotaiah, S. (2005) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2005.858729 · Cited by 271
Cited by
Wireless Power Transfer for Electric Vehicle Applications
Li, S., & Mi, C. C. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2319453 · Cited by 2,185
Wireless Power Transfer—An Overview
Zhang, Z., Pang, H., Georgiadis, A., & Cecati, C. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2835378 · Cited by 1,723
Modern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263
A Comprehensive Review of Wireless Charging Technologies for Electric Vehicles
Ahmad, A., Alam, M. S., & Chabaan, R. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2771619 · Cited by 993
Wireless Power Transfer for Vehicular Applications: Overview and Challenges
Patil, D., McDonough, M. K., Miller, J. M., Fahimi, B., & Balsara, P. T. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2780627 · Cited by 991
Wireless Charging Technologies: Fundamentals, Standards, and Network Applications
Lu, X., Wang, P., Niyato, D., Kim, D. I., & Han, Z. (2016) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2015.2499783 · Cited by 968
Dai, J., & Ludois, D. C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2415253 · Cited by 638
Inductive Wireless Power Transfer Charging for Electric Vehicles—A Review
Mahesh, A., Chokkalingam, B., & Mihet-Popa, L. (2021) · IEEE Access · doi:10.1109/access.2021.3116678 · Cited by 513
A review of wireless power transfer for electric vehicles: Prospects to enhance sustainable mobility
Bi, Z., Kan, T., Mi, C. C., Zhang, Y., Zhao, Z., & Keoleian, G. A. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.07.003 · Cited by 485
Vu, V.-B., Tran, D.-H., & Choi, W. (2018) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2766605 · Cited by 450
Diekhans, T., & De Doncker, R. W. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2393912 · Cited by 421
Comparison Study on SS and Double-Sided LCC Compensation Topologies for EV/PHEV Wireless Chargers
Li, W., Zhao, H., Deng, J., Li, S., & Mi, C. C. (2016) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2015.2479938 · Cited by 375
Advances in High-Power Wireless Charging Systems: Overview and Design Considerations
Feng, H., Tavakoli, R., Onar, O. C., & Pantic, Z. (2020) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2020.3012543 · Cited by 368
Song, K., Li, Z., Jiang, J., & Zhu, C. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2767099 · Cited by 337
He, H., Sun, F., Wang, Z., Lin, C., Zhang, C., Xiong, R., Deng, J., Zhu, X., Xie, P., Zhang, S., et al. (2022) · Green Energy and Intelligent Transportation · doi:10.1016/j.geits.2022.100020 · Cited by 334
Li, W., Zhao, H., Li, S., Deng, J., Kan, T., & Mi, C. C. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2384003 · Cited by 331
Hybrid Bidirectional Wireless EV Charging System Tolerant to Pad Misalignment
Zhao, L., Thrimawithana, D. J., & Madawala, U. K. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2686301 · Cited by 328
Tavakoli, R., & Pantic, Z. (2018) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2017.2761763 · Cited by 304
A critical review on wireless charging for electric vehicles
Machura, P., & Li, Q. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.01.027 · Cited by 295
A Review on UAV Wireless Charging: Fundamentals, Applications, Charging Techniques and Standards
Chittoor, P. K., Chokkalingam, B., & Mihet-Popa, L. (2021) · IEEE Access · doi:10.1109/access.2021.3077041 · Cited by 269
Opportunities and Challenges for Near-Field Wireless Power Transfer: A Review
Jawad, A. M., Nordin, R., Gharghan, S. K., Jawad, H. M., & Ismail, M. (2017) · Energies · doi:10.3390/en10071022 · Cited by 268
Survey on Aerial Radio Access Networks: Toward a Comprehensive 6G Access Infrastructure
Dao, N.-N., Pham, Q.-V., Tu, N. H., Thanh, T. T., Bao, V. N. Q., Lakew, D. S., & Cho, S. (2021) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2021.3059644 · Cited by 262
A Comparative Study of Power Supply Architectures in Wireless EV Charging Systems
Esteban, B., Sid-Ahmed, M., & Kar, N. C. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2440256 · Cited by 256
Reflexive Field Containment in Dynamic Inductive Power Transfer Systems
Lee, K., Pantic, Z., & Lukic, S. M. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2287262 · Cited by 173
Azad, A. N., Echols, A., Kulyukin, V. A., Zane, R., & Pantic, Z. (2019) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2870339 · Cited by 125
Tavakoli, R., & Pantic, Z. (2017) · 2017 IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2017.8096493 · Cited by 21
Metadata
- Authors
- Wu, H. H., Gilchrist, A., Sealy, K. D., & Bronson, D.
- Venue
- IEEE Transactions on Industrial Informatics
- Published
- 2012-08
- Volume
- 8
- Issue
- 3
- Pages
- 585-595
- ISSN
- 1551-3203 (ISSN-L)
- 1941-0050
- OpenAlex
- W2014517525
- Cited by
- 512
- References
- 20
- FWCI
- 18.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.