The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Model-Based Fault Detection and Identification for Switching Power Converters
Abstract
We present the analysis, design, and experimental validation of a model-based fault detection and identification (FDI) method for switching power converters using a model-based state estimator approach. The proposed FDI approach is general in that it can be used to detect and identify arbitrary faults in components and sensors in a broad class of switching power converters. The FDI approach is experimentally demonstrated on a nanogrid prototype with a 380-V dc distribution bus. The nanogrid consists of four different switching power converters, including a buck converter, an interleaved boost converter, a single-phase rectifier, and a three-phase inverter. We construct a library of fault signatures for possible component and sensor faults in all four converters. The FDI algorithm successfully achieves fault detection in under 400 $\mu$s and fault identification in under 10 ms for faults in each converter. The proposed FDI approach enables a flexible and scalable solution for improving fault tolerance and awareness in power electronics systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Principles of Power Electronics
Kassakian, J. G., Perreault, D. J., Verghese, G. C., & Schlecht, M. F. (2023) · Cambridge University Press eBooks · doi:10.1017/9781009023894 · Cited by 1,394
Issues of Fault Diagnosis for Dynamic Systems
(2000) · Springer eBooks · doi:10.1007/978-1-4471-3644-6 · Cited by 1,330
Dependability: Basic Concepts and Terminology
Laprie, J. C. (1992) · Dependable Computing and Fault-Tolerant Systems · doi:10.1007/978-3-7091-9170-5_1 · Cited by 745
Zero Energy Buildings: A Critical Look at the Definition
Torcellini, P., Pless, S., Deru, M. P., & Crawley, D. B. (2006) · Cited by 608
Survey on Fault-Tolerant Techniques for Power Electronic Converters
Zhang, W., Xu, D., Enjeti, P. N., Li, H., Hawke, J. T., & Krishnamoorthy, H. S. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2304561 · Cited by 587
Fault detection of open-switch damage in voltage-fed PWM motor drive systems
de Araujo Ribeiro, R. L., Jacobina, C. B., da Silva, E. R. C., & Lima, A. M. N. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.809351 · Cited by 441
Fault detection and isolation on a PWM inverter by knowledge-based model
Peuget, R., Courtine, S., & Rognon, J.-P. (1998) · IEEE Transactions on Industry Applications · doi:10.1109/28.739017 · Cited by 384
Estima, J. O., & Marques Cardoso, A. J. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2188877 · Cited by 377
Fault Detection for Modular Multilevel Converters Based on Sliding Mode Observer
Shao, S., Wheeler, P. W., Clare, J. C., & Watson, A. J. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2242093 · Cited by 361
National Renewable Energy Laboratory
(2010) · Choice Reviews Online · doi:10.5860/choice.47-5675 · Cited by 350
Zidani, F., Diallo, D., Benbouzid, M. E. H., & Nait-Said, R. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.911951 · Cited by 335
Li, B., Shi, S., Wang, B., Wang, G., Wang, W., & Xu, D. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2454534 · Cited by 329
Robust model-based fault diagnosis for dynamic systems
Jiang, J. (2002) · Automatica · doi:10.1016/s0005-1098(01)00290-4 · Cited by 325
Fault detection and isolation on a PWM inverter by knowledge-based model
Peuget, R., Courtine, S., & Rognon, J. P. (2002) · IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting · doi:10.1109/ias.1997.629048 · Cited by 304
Open-Transistor Fault Diagnostics in Voltage-Source Inverters by Analyzing the Load Currents
Sleszynski, W., Nieznanski, J., & Cichowski, A. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2023640 · Cited by 300
Fault Diagnostic System for a Multilevel Inverter Using a Neural Network
Khomfoi, S., & Tolbert, L. M. (2007) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2007.897128 · Cited by 291
Fault Diagnosis and Reconfiguration for Multilevel Inverter Drive Using AI-Based Techniques
Khomfoi, S., & Tolbert, L. M. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.906994 · Cited by 284
Open-Circuit Fault Diagnosis in PMSG Drives for Wind Turbine Applications
Freire, N. M. A., Estima, J. O., & Marques Cardoso, A. J. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2207655 · Cited by 277
Jung, S.-M., Park, J.-S., Kim, H.-W., Cho, K.-Y., & Youn, M.-J. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2212916 · Cited by 271
A Failure-Detection Strategy for IGBT Based on Gate-Voltage Behavior Applied to a Motor Drive System
Rodríguez-Blanco, M. A., Claudio-Sánchez, A., Theilliol, D., Vela-Valdés, L. G., Sibaja-Terán, P., Hernández-González, L., & Aguayo-Alquicira, J. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2098355 · Cited by 264
An, Q.-T., Sun, L.-Z., Zhao, K., & Sun, L. (2011) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2052472 · Cited by 262
FPGA-Based Real-Time Power Converter Failure Diagnosis for Wind Energy Conversion Systems
Karimi, S., Gaillard, A., Poure, P., & Saadate, S. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2005244 · Cited by 245
Campos-Delgado, D. U., & Espinoza-Trejo, D. R. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2047829 · Cited by 224
Diallo, D., Benbouzid, M. E. H., Hamad, D., & Pierre, X. (2005) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2005.847961 · Cited by 220
Fault Detection on Multicell Converter Based on Output Voltage Frequency Analysis
Lezana, P., Aguilera, R., & Rodriguez, J. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2013845 · Cited by 215
Shahbazi, M., Jamshidpour, E., Poure, P., Saadate, S., & Zolghadri, M. R. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2224078 · Cited by 195
Fault-Tolerant Strategy for a Photovoltaic DC--DC Converter
Ribeiro, E., Cardoso, A. J. M., & Boccaletti, C. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2226059 · Cited by 194
Pu, X.-S., Nguyen, T. H., Lee, D.-C., Lee, K.-B., & Kim, J.-M. (2013) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2218561 · Cited by 189
Youssef, A. B., El Khil, S. K., & Slama-Belkhodja, I. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2257862 · Cited by 186
Freire, N. M. A., Estima, J. O., & Cardoso, A. J. M. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2279383 · Cited by 167
Open-Circuit Fault Diagnosis in Interleaved DC–DC Converters
Ribeiro, E., Cardoso, A. J. M., & Boccaletti, C. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2272381 · Cited by 166
Model-based fault diagnosis in electric drives using machine learning
Murphey, Y. L., Masrur, M. A., Chen, Z., & Zhang, B. (2006) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2006.875568 · Cited by 165
Zhang, J., Zhao, J., Zhou, D., & Huang, C. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2301167 · Cited by 144
Fault Detection and Mitigation in Multilevel Converter STATCOMs
Yazdani, A., Sepahvand, H., Crow, M. L., & Ferdowsi, M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2050415 · Cited by 137
Failures-tolerance and remedial strategies of a PWM multicell inverter
Richardeau, F., Baudesson, P., & Meynard, T. A. (2002) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2002.805588 · Cited by 133
Real-time detection of intermittent misfiring in a voltage-fed PWM inverter induction-motor drive
Smith, K. S., Ran, L., & Penman, J. (1997) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.605620 · Cited by 130
Masrur, M. A., Chen, Z., & Murphey, Y. L. (2010) · IET Power Electronics · doi:10.1049/iet-pel.2008.0362 · Cited by 123
Switch Short-Circuit Fault Diagnosis and Remedial Strategy for Full-Bridge DC–DC Converters
Pei, X., Nie, S., & Kang, Y. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2310201 · Cited by 120
Salehifar, M., Arashloo, R. S., Moreno-Eguilaz, J. M., Sala, V., & Romeral, L. (2014) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2293518 · Cited by 118
Aleenejad, M., Mahmoudi, H., Moamaei, P., & Ahmadi, R. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2444661 · Cited by 103
Simple Fault Diagnosis Based on Operating Characteristic of Brushless Direct-Current Motor Drives
Park, B.-G., Lee, K., Kim, R.-Y., Kim, T., Ryu, J.-S., & Hyun, D.-S. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2072895 · Cited by 99
Flexible Fault-Tolerant Topology for Switched Reluctance Motor Drives
Hu, Y., Gan, C., Cao, W., Zhang, J., Li, W., & Finney, S. J. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2477165 · Cited by 96
Duan, P., Xie, K., Zhang, L., & Rong, X. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2095470 · Cited by 95
Fault Diagnosis of a ZVS DC–DC Converter Based on DC-Link Current Pulse Shapes
Kim, S. Y., Nam, K., Song, H.-S., & Kim, H.-G. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.910627 · Cited by 93
Meinguet, F., Sandulescu, P., Kestelyn, X., & Semail, E. (2013) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2234157 · Cited by 91
Analysis and Experimental Verification of a Fault-Tolerant HEV Powertrain
Song, Y., & Wang, B. (2013) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2245513 · Cited by 81
Lin, F., Hung, Y., Hwang, J., & Tsai, M.-T. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2224888 · Cited by 81
Adding Inverter Fault Detection to Model-Based Predictive Control for Flying-Capacitor Inverters
Druant, J., Vyncke, T. J., Belie, F. D., Sergeant, P., & Melkebeek, J. A. A. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2354591 · Cited by 72
Awadallah, M. A., & Morcos, M. M. (2006) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2004.841502 · Cited by 71
A modular methodology for fast fault detection and classification in power systems
Chowdhury, F. N., & Aravena, J. L. (1998) · IEEE Transactions on Control Systems Technology · doi:10.1109/87.709497 · Cited by 56
Fault diagnosis algorithm based on switching function for boost converters
Cho, H., Kwak, S., & Lee, S.-H. (2014) · International Journal of Electronics · doi:10.1080/00207217.2014.966780 · Cited by 22
Cited by
A Digital Twin Approach for Fault Diagnosis in Distributed Photovoltaic Systems
Jain, P., Poon, J., Singh, J. P., Spanos, C., Sanders, S. R., & Panda, S. K. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2911594 · Cited by 462
Self-citationAli, Z., Terriche, Y., Hoang, L. Q. N., Abbas, S. Z., Hassan, M. A., Sadiq, M., Su, C.-L., & Guerrero, J. M. (2021) · IEEE Access · doi:10.1109/access.2021.3112383 · Cited by 104
“Recently In [158], the model-based FDI strategy has been presented for detecting components or the sensor faults for switching power converters.”
Method
Metadata
- Authors
- Poon, J., Jain, P., Konstantakopoulos, I. C., Spanos, C., Panda, S. K., & Sanders, S. R.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 2017-02
- Volume
- 32
- Issue
- 2
- Pages
- 1419-1430
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2318970278
- Cited by
- 257
- References
- 51
- FWCI
- 18.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.