The DOI matches its Crossref record; 147 of the 147 references it cites were found in a registry or an index.
Cements in the 21 st century: Challenges, perspectives, and opportunities
Open accessAbstract
Since its widespread use in concrete began over 100 years ago, the chemical composition and physical properties of portland cement have changed only incrementally in response to various and competing pressures of constructability and cost. Instead, the construction demands have been met largely through the development and introduction of chemical admixtures that are added to the binder during mixing. These same demands persist into the 21 st Century and are just as important now as before, yet newer driving forces are simultaneously pushing the industry both toward more automated construction and toward more sustainable concrete materials that generate lower CO 2 and have longer service life. These new cement binder formulations and new construction technologies are expected to go well outside the bounds of traditional portland cement compositions and batching and placing practices. This study examines the origins of these new market demands and the influence they are having on the construction industry. Seven scientific or technological pathways are identified that will be critical for enabling the kinds of transformational changes in cement and concrete construction that the industry needs: (i) additive manufacturing, (ii) designer admixtures, (iii) curated materials data repositories, (iv) computationally designed composites, (v) big data and smart materials, (vi) alternative binder compositions, and (vii) next‐generation instrumentation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Data mining: concepts and techniques
(2012) · Choice Reviews Online · doi:10.5860/choice.49-3305 · Cited by 28,531
A logical calculus of the ideas immanent in nervous activity
McCulloch, W. S., & Pitts, W. (1943) · The Bulletin of Mathematical Biophysics · doi:10.1007/bf02478259 · Cited by 18,566
Genetic Programming: On the Programming of Computers by Means of Natural Selection
Koza, J. R. (1992) · Medical Entomology and Zoology · Cited by 13,082
Abdi, H., & Williams, L. J. (2010) · WIREs Computational Statistics · doi:10.1002/wics.101 · Cited by 11,104
Artificial intelligence: A modern approach
Nilsson, N. J. (1996) · Artificial Intelligence · doi:10.1016/0004-3702(96)00007-0 · Cited by 10,583
Ridge regression: Biased estimation for nonorthogonal problems
Hoerl, A. E., & Kennard, R. W. (1970) · Technometrics · doi:10.1080/00401706.1970.10488634 · Cited by 9,648
Solutions of Ill-Posed Problems.
Bell, J. B., Tikhonov, A. N., & Arsenin, V. Y. (1978) · Mathematics of Computation · doi:10.2307/2006360 · Cited by 8,101
Dynamic Programming Algorithm Optimization for Spoken Word Recognition
Sakoe, H., & Chiba, S. (1978) · IEEE Transactions on Acoustics Speech and Signal Processing · doi:10.1109/tassp.1978.1163055 · Cited by 6,727
A general regression neural network
Specht, D. F. (1991) · IEEE Transactions on Neural Networks · doi:10.1109/72.97934 · Cited by 4,492
Cygan, R. T., Liang, J.-J., & Kalinichev, A. G. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp0363287 · Cited by 3,191
Data-intensive applications, challenges, techniques and technologies: A survey on Big Data
Philip Chen, C. L., & Zhang, C.-Y. (2014) · Information Sciences · doi:10.1016/j.ins.2014.01.015 · Cited by 3,047
The estimation of the gradient of a density function, with applications in pattern recognition
Fukunaga, K., & Hostetler, L. (1975) · IEEE Transactions on Information Theory · doi:10.1109/tit.1975.1055330 · Cited by 3,043
Fast and Accurate Modeling of Molecular Atomization Energies with Machine Learning
Rupp, M., Tkatchenko, A., Müller, K.-R., & von Lilienfeld, O. A. (2012) · Physical Review Letters · doi:10.1103/physrevlett.108.058301 · Cited by 2,312
Mechanisms of cement hydration
Bullard, J. W., Jennings, H. M., Livingston, R. A., Nonat, A., Scherer, G. W., Schweitzer, J. S., Scrivener, K. L., & Thomas, J. J. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.09.011 · Cited by 2,237
Self-citation(2005) · Choice Reviews Online · doi:10.5860/choice.42-5612 · Cited by 1,856
Nanotechnology in concrete – A review
Sanchez, F., & Sobolev, K. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.03.014 · Cited by 1,834
Self-citationNew cements for the 21st century: The pursuit of an alternative to Portland cement
Shi, C., Jiménez, A. F., & Palomo, A. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.016 · Cited by 1,691
Sustainable cement production—present and future
Schneider, M., Romer, M., Tschudin, M., & Bolio, H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.019 · Cited by 1,643
Big data: a revolution that will transform how we live, work, and think
Armstrong, K. (2014) · Information, Communication & Society · doi:10.1080/1369118x.2014.923482 · Cited by 1,629
Separation of CO2 from Flue Gas: A Review
Aaron, D., & Tsouris, C. (2005) · Separation Science and Technology · doi:10.1081/ss-200042244 · Cited by 1,525
Advances in understanding hydration of Portland cement
Scrivener, K. L., Juilland, P., & Monteiro, P. J. M. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.05.025 · Cited by 1,319
Markov Random Fields and Their Applications
Kindermann, R., & Snell, J. L. (1980) · Contemporary Mathematics · doi:10.1090/conm/001 · Cited by 1,290
Constantinides, G., & Ulm, F.-J. (2004) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00230-8 · Cited by 1,226
Developments in construction-scale additive manufacturing processes
Lim, S., Buswell, R. A., Le, T. T., Austin, S. A., Gibb, A. G. F., & Thorpe, T. (2012) · Automation in Construction · doi:10.1016/j.autcon.2011.06.010 · Cited by 1,205
Automated construction by contour crafting—related robotics and information technologies
Khoshnevis, B. (2004) · Automation in Construction · doi:10.1016/j.autcon.2003.08.012 · Cited by 1,161
Morandeau, A., Thiéry, M., & Dangla, P. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.11.015 · Cited by 1,114
Composition and density of nanoscale calcium–silicate–hydrate in cement
Allen, A. J., Thomas, J. J., & Jennings, H. M. (2007) · Nature Materials · doi:10.1038/nmat1871 · Cited by 1,089
A realistic molecular model of cement hydrates
Pellenq, R. J.-M., Kushima, A., Shahsavari, R., Van Vliet, K. J., Buehler, M. J., Yip, S., & Ulm, F.-J. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0902180106 · Cited by 1,088
Self-citationHardened properties of high-performance printing concrete
Le, T. T., Austin, S. A., Lim, S., Buswell, R. A., Law, R., Gibb, A. G. F., & Thorpe, T. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.12.003 · Cited by 1,020
Trends and developments in green cement and concrete technology
Imbabi, M. S., Carrigan, C., & McKenna, S. (2012) · International Journal of Sustainable Built Environment · doi:10.1016/j.ijsbe.2013.05.001 · Cited by 1,012
A critical review of the use of 3-D printing in the construction industry
Wu, P., Wang, J., & Wang, X. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.04.005 · Cited by 1,002
Automatic Construction of Decision Trees from Data: A Multi-Disciplinary Survey
Murthy, S. K. (1998) · Data Mining and Knowledge Discovery · doi:10.1023/a:1009744630224 · Cited by 991
United Nations Population Division
(2010) · Handbook of Disease Burdens and Quality of Life Measures · doi:10.1007/978-0-387-78665-0_6852 · Cited by 982
Gosselin, C., Duballet, R., Roux, P., Gaudillière, N., Dirrenberger, J., & Morel, P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.03.097 · Cited by 962
Structural built-up of cement-based materials used for 3D-printing extrusion techniques
Perrot, A., Rangeard, D., & Pierre, A. (2016) · Materials and Structures · doi:10.1617/s11527-015-0571-0 · Cited by 959
Markov Random Field Modeling in Image Analysis
(2009) · Advances in Pattern Recognition · doi:10.1007/978-1-84800-279-1 · Cited by 823
Building components for an outpost on the lunar soil by means of a novel 3D printing technology
Cesaretti, G., Dini, E., De Kestelier, X., Colla, V., & Pambaguian, L. (2014) · Acta Astronautica · doi:10.1016/j.actaastro.2013.07.034 · Cited by 806
Fiber-reinforced concrete: an overview after 30 years of development
Zollo, R. F. (1997) · Cement and Concrete Composites · doi:10.1016/s0958-9465(96)00046-7 · Cited by 802
Neural network potential-energy surfaces in chemistry: a tool for large-scale simulations
Behler, J. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c1cp21668f · Cited by 781
Konsta-Gdoutos, M. S., Metaxa, Z. S., & Shah, S. P. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.10.007 · Cited by 683
Provis, J. L., & van Deventer, J. S. J. (2009) · Woodhead Publishing Limited eBooks · doi:10.1533/9781845696382 · Cited by 646
Three‐Dimensional Computer Simulation of Portland Cement Hydration and Microstructure Development
Bentz, D. P. (1997) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1997.tb02785.x · Cited by 602
Hierarchical structure and mechanical properties of nacre: a review
Sun, J., & Bhushan, B. (2012) · RSC Advances · doi:10.1039/c2ra20218b · Cited by 601
3D Printing of Buildings and Building Components as the Future of Sustainable Construction?
Hager, I., Golonka, A., & Putanowicz, R. (2016) · Procedia Engineering · doi:10.1016/j.proeng.2016.07.357 · Cited by 593
Myers, R. J., Bernal, S. A., San Nicolas, R., & Provis, J. L. (2013) · Langmuir · doi:10.1021/la4000473 · Cited by 579
Combinatorial molecular optimization of cement hydrates
Abdolhosseini Qomi, M. J., Krakowiak, K. J., Bauchy, M., Stewart, K. L., Shahsavari, R., Jagannathan, D., Brommer, D. B., Baronnet, A., Buehler, M. J., Yip, S., et al. (2014) · Nature Communications · doi:10.1038/ncomms5960 · Cited by 571
Self-citationFreeform Construction: Mega-scale Rapid Manufacturing for construction
Buswell, R. A., Soar, R. C., Gibb, A. G. F., & Thorpe, A. (2007) · Automation in Construction · doi:10.1016/j.autcon.2006.05.002 · Cited by 536
Science and Technology of Concrete Admixtures
Aïtcin, P.-C., & Flatt, R. J. (2016) · Elsevier eBooks · doi:10.1016/c2015-0-00150-2 · Cited by 525
Modeling and simulation of cement hydration kinetics and microstructure development
Thomas, J. J., Biernacki, J. J., Bullard, J. W., Bishnoi, S., Dolado, J. S., Scherer, G. W., & Luttge, A. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.10.004 · Cited by 489
Self-citationPredicting crystal structure by merging data mining with quantum mechanics
Fischer, C. C., Tibbetts, K. J., Morgan, D., & Ceder, G. (2006) · Nature Materials · doi:10.1038/nmat1691 · Cited by 463
Konsta-Gdoutos, M. S., & Aza, C. A. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.07.003 · Cited by 461
Modeling the linear elastic properties of Portland cement paste
Haecker, C., Garboczi, E. J., Bullard, J. W., Bohn, R. B., Sun, Z., Shah, S. P., & Voigt, T. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2005.05.001 · Cited by 446
Self-citationA self-sensing carbon nanotube/cement composite for traffic monitoring
Han, B., Yu, X., & Kwon, E. (2009) · Nanotechnology · doi:10.1088/0957-4484/20/44/445501 · Cited by 431
Mega-scale fabrication by Contour Crafting
Khoshnevis, B., Hwang, D., Yao, K. T., & Yeh, Z. (2006) · International Journal of Industrial and Systems Engineering · doi:10.1504/ijise.2006.009791 · Cited by 378
µic: A new platform for modelling the hydration of cements
Bishnoi, S., & Scrivener, K. L. (2009) · Cement and Concrete Research · doi:10.1016/j.cemconres.2008.12.002 · Cited by 371
A physico-chemical basis for novel cementitious binders
Gartner, E. M., & Macphee, D. E. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.006 · Cited by 363
The influence of cellulose nanocrystal additions on the performance of cement paste
Cao, Y., Zavaterri, P., Youngblood, J., Moon, R., & Weiss, J. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.11.008 · Cited by 359
Minimising the global warming potential of clay based geopolymers
Heath, A., Paine, K., & McManus, M. (2014) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.04.046 · Cited by 352
Assessing, Understanding and Unlocking Supplementary Cementitious Materials
Snellings, R. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.12 · Cited by 348 · cited 1×
“This burden represents about 7% of global emissions today, but without constraints the percentage is expected to increase to 25% of global emissions by 2050.(224,225) Therefore, a step change is required to produce cements with reduced (or zero) CO2 impact—a requirement which may force cement manufacturers out of the…”
BackgroundPhase and morphology evolution of calcium carbonate precipitated by carbonation of hydrated lime
Cizer, Ö., Rodriguez-Navarro, C., Ruiz-Agudo, E., Elsen, J., Van Gemert, D., & Van Balen, K. (2012) · Journal of Materials Science · doi:10.1007/s10853-012-6535-7 · Cited by 330
The crystal structure of the 11Å natural tobermorite Ca2.25[Si3O7.5(OH)1.5] · 1H2O
(1981) · Zeitschrift für Kristallographie - Crystalline Materials · doi:10.1524/zkri.1981.154.3-4.189 · Cited by 329
Performance of belite–sulfoaluminate cements
Quillin, K. C. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00543-9 · Cited by 314
CO2 Capture in the Cement Industry
Barker, D. J., Turner, S. A., Napier-Moore, P. A., Clark, M., & Davison, J. E. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.014 · Cited by 313
Empirical force fields for complex hydrated calcio-silicate layered materials
Shahsavari, R., Pellenq, R. J.-M., & Ulm, F.-J. (2011) · Phys. Chem. Chem. Phys. · doi:10.1039/c0cp00516a · Cited by 313
Self-citationEffect of Calcium Additions on N–A–S–H Cementitious Gels
García‐Lodeiro, I., Fernández‐Jiménez, A., Palomo, A., & Macphee, D. E. (2010) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2010.03668.x · Cited by 304
How Nanotechnology Can Change the Concrete World
Sobolev, K., & Ferrada Gutiérrez, M. (2009) · Progress in Nanotechnology · doi:10.1002/9780470588260.ch16 · Cited by 303
Self-citationLin, Y. C., Zhang, J., & Zhong, J. (2008) · Computational Materials Science · doi:10.1016/j.commatsci.2008.01.039 · Cited by 300
Time-series forecasting using flexible neural tree model
Chen, Y., Yang, B., Dong, J., & Abraham, A. (2005) · Information Sciences · doi:10.1016/j.ins.2004.10.005 · Cited by 296
Machine Learning in Materials Science: Recent Progress and Emerging Applications
Mueller, T., Kusne, A. G., & Ramprasad, R. (2016) · Reviews in Computational Chemistry · doi:10.1002/9781119148739.ch4 · Cited by 295
Kusne, A. G., Gao, T., Mehta, A., Ke, L., Nguyen, M. C., Ho, K.-M., Antropov, V., Wang, C.-Z., Kramer, M. J., Long, C., et al. (2014) · Scientific Reports · doi:10.1038/srep06367 · Cited by 273
Kinetics of the Reaction of Ca(OH) 2 with CO 2 at Low Temperature
Shih, S.-M., Ho, C.-S., Song, Y.-S., & Lin, J.-P. (1999) · Industrial & Engineering Chemistry Research · doi:10.1021/ie980508z · Cited by 262
Green, M. L., Takeuchi, I., & Hattrick-Simpers, J. R. (2013) · Journal of Applied Physics · doi:10.1063/1.4803530 · Cited by 259
Han, B., Guan, X., & Ou, J. (2006) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2006.08.003 · Cited by 252
Composition and Evolution of the Upper Mantle
Ringwood, A. E. (2013) · Geophysical Monograph Series · doi:10.1029/gm013p0001 · Cited by 250
Shahsavari, R., Buehler, M. J., Pellenq, R. J. ‐., & Ulm, F. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.03199.x · Cited by 243
Self-citationHigh‐resolution, energy‐dispersive microcalorimeter spectrometer for X‐ray microanalysis
WOLLMAN, D. A., IRWIN, K. D., HILTON, G. C., DULCIE, L. L., NEWBURY, D. E., & MARTINIS, J. M. (1997) · Journal of Microscopy · doi:10.1046/j.1365-2818.1997.2670824.x · Cited by 241
A new view on the kinetics of tricalcium silicate hydration
Nicoleau, L., & Nonat, A. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.04.009 · Cited by 214
Self-citationCriado, M., Fernández-Jiménez, A., & Palomo, A. (2010) · Fuel · doi:10.1016/j.fuel.2010.03.051 · Cited by 195
Mishra, R. K., Flatt, R. J., & Heinz, H. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp312815g · Cited by 193
Development of a Viable Concrete Printing Process
Lim, S., Buswell, R., Le, T., Wackrow, R., Austin, S., Gibb, A., & Thorpe, T. (2011) · Proceedings of the International Symposium on Automation and Robotics in Construction (IAARC) · doi:10.22260/isarc2011/0124 · Cited by 192
Bullerjahn, F., Schmitt, D., & Ben Haha, M. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.02.004 · Cited by 189
Microstructure informatics using higher-order statistics and efficient data-mining protocols
Kalidindi, S. R., Niezgoda, S. R., & Salem, A. A. (2011) · JOM · doi:10.1007/s11837-011-0057-7 · Cited by 178
Self-monitoring of fatigue damage in carbon fiber reinforced cement
Fu, X., & Chung, D. D. L. (1996) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00184-0 · Cited by 173
A Molecular Dynamic Study of Cementitious Calcium Silicate Hydrate (C–S–H) Gels
Dolado, J. S., Griebel, M., & Hamaekers, J. (2007) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2007.01984.x · Cited by 166
Stutzman, P. E., Bullard, J. W., & Feng, P. (2016) · Journal of Research of the National Institute of Standards and Technology · doi:10.6028/jres.121.004 · Cited by 166
Self-citationCarbonate binders: Reaction kinetics, strength and microstructure
Silva, P. D., Bucea, L., Moorehead, D. R., & Sirivivatnanon, V. (2006) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2006.03.004 · Cited by 163
Metaxa, Z. S., Konsta-Gdoutos, M. S., & Shah, S. P. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.10.009 · Cited by 162
C-S-H/solution interface: Experimental and Monte Carlo studies
Labbez, C., Pochard, I., Jönsson, B., & Nonat, A. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.10.002 · Cited by 160
Vance, K., Falzone, G., Pignatelli, I., Bauchy, M., Balonis, M., & Sant, G. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b02356 · Cited by 158
Self-citationINTRODUCTION, CLASSIFICATION AND APPLICATIONS OF SMART MATERIALS: AN OVERVIEW
Kamila (2013) · American Journal of Applied Sciences · doi:10.3844/ajassp.2013.876.880 · Cited by 157
Roelfstra, P. E., Sadouki, H., & Wittmann, F. H. (1985) · Materials and Structures · doi:10.1007/bf02472402 · Cited by 151
Understanding and Controlling the Reactivity of the Calcium Silicate phases from First Principles
Durgun, E., Manzano, H., Pellenq, R. J. ‐., & Grossman, J. C. (2012) · Chemistry of Materials · doi:10.1021/cm203127m · Cited by 149
Lunar Contour Crafting - A Novel Technique for ISRU-Based Habitat Development
Khoshnevis, B., Bodiford, M., Burks, K., Ethridge, E., Tucker, D., Kim, W., Toutanji, H., & Fiske, M. (2005) · 43rd AIAA Aerospace Sciences Meeting and Exhibit · doi:10.2514/6.2005-538 · Cited by 138
Processing and Properties of Construction Materials for 3D Printing
Tay, Y. W. D., Panda, B., Paul, S. C., Tan, M. J., Qian, S., Leong, K. F., & Chua, C. K. (2016) · Materials science forum · doi:10.4028/www.scientific.net/msf.861.177 · Cited by 130
Aranda, M. Á. G., & la Torre, Á. G. D. (2013) · Elsevier eBooks · doi:10.1533/9780857098993.4.488 · Cited by 130
Order and disorder in calcium–silicate–hydrate
Bauchy, M., Qomi, M. J. A., Ulm, F., & Pellenq, R. J. ‐. (2014) · The Journal of Chemical Physics · doi:10.1063/1.4878656 · Cited by 126
Microstructural origins of cement paste degradation by external sulfate attack
Feng, P., Garboczi, E. J., Miao, C., & Bullard, J. W. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.07.186 · Cited by 119
Self-citationGandomi, A. H., Alavi, A. H., & Sahab, M. G. (2009) · Materials and Structures · doi:10.1617/s11527-009-9559-y · Cited by 118
Long, C. J., Hattrick-Simpers, J. R., Murakami, M., Srivastava, R. C., Takeuchi, I., Karen, V. L., & Li, X. (2007) · Review of Scientific Instruments · doi:10.1063/1.2755487 · Cited by 117
Experimental measurement of portlandite carbonation kinetics with supercritical CO2
Regnault, O., Lagneau, V., & Schneider, H. (2009) · Chemical Geology · doi:10.1016/j.chemgeo.2009.03.019 · Cited by 114
Rieger, J., Kellermeier, M., & Nicoleau, L. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201402890 · Cited by 113
Self-citationEstimation of CO2 emissions from China’s cement production: Methodologies and uncertainties
Ke, J., McNeil, M. A., Price, L., Khanna, N. Z., & Zhou, N. (2013) · Energy Policy · doi:10.1016/j.enpol.2013.01.028 · Cited by 112
A new smart traffic monitoring method using embedded cement-based piezoelectric sensors
Zhang, J., Lu, Y., Lu, Z., et al. (2015) · Smart Materials and Structures · doi:10.1088/0964-1726/24/2/025023 · Cited by 110
Magnesium-based cements for CO2 capture and utilisation
Morrison, J., Jauffret, G., Galvez-Martos, J. L., & Glasser, F. P. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.12.016 · Cited by 105
Self-citationPeyvandi, A., Sbia, L. A., Soroushian, P., & Соболев, К. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.06.094 · Cited by 102
A parallel reaction-transport model applied to cement hydration and microstructure development
Bullard, J. W., Enjolras, E., George, W. L., Satterfield, S. G., & Terrill, J. E. (2010) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/18/2/025007 · Cited by 98
Self-citationAtomistic modeling of crystal structure of Ca1.67SiHx
Kovačević, G., Persson, B., Nicoleau, L., Nonat, A., & Veryazov, V. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.09.003 · Cited by 89
Self-citationModern developments related to nanotechnology and nanoengineering of concrete
Соболев, К. (2016) · Frontiers of Structural and Civil Engineering · doi:10.1007/s11709-016-0343-0 · Cited by 88
Analytical Model for the Alite (C 3 S) Dissolution Topography
Nicoleau, L., & Bertolim, M. A. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13647 · Cited by 87
Self-citationAdvancing the Competitiveness and Efficiency of the U.S. Construction Industry
National Research Council (2009) · National Academies Press eBooks · doi:10.17226/12717 · Cited by 85
Han, B., Han, B., Yu, Y. P., et al. (2008) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2008.06.021 · Cited by 83
Sequestering CO2 by Mineralization into Useful Nesquehonite-Based Products
Glasser, F. P., Jauffret, G., Morrison, J., Galvez-Martos, J.-L., Patterson, N., & Imbabi, M. S.-E. (2016) · Frontiers in Energy Research · doi:10.3389/fenrg.2016.00003 · Cited by 82
Self-citationOnline monitoring of cracking in concrete structures using embedded piezoelectric transducers
Dumoulin, C., Karaiskos, G., Sener, J.-Y., & Deraemaeker, A. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/11/115016 · Cited by 77
Burciaga-Díaz, O., Gómez-Zamorano, L. Y., & Escalante-Garcia, J. I. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.111 · Cited by 77
Calcium Mediated Polyelectrolyte Adsorption on Like-Charged Surfaces
Turesson, M., Labbez, C., & Nonat, A. (2011) · Langmuir · doi:10.1021/la2030846 · Cited by 74
Atomic pair distribution function analysis of materials containing crystalline and amorphous phases
Proffen, T. E., Page, K. L., McLain, S. E., Clausen, B., Darling, T. W., TenCate, J. A., Lee, S.-Y., & Üstündag, E. (2005) · Zeitschrift für Kristallographie - Crystalline Materials · doi:10.1524/zkri.2005.220.12.1002 · Cited by 71
Environmental impact of Portland cement production
Habert, G. (2013) · Elsevier eBooks · doi:10.1533/9780857098993.1.3 · Cited by 70
Mechanism of aluminium incorporation into C–S–H from ab initio calculations
Pegado, L., Labbez, C., & Churakov, S. V. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta14597b · Cited by 67
Morphogenesis of cement hydrate
Moghaddam, S. E., Hejazi, V., Hwang, S. H., Sreenivasan, S. T., Miller, J., Shi, B., Zhao, S., Rusakova, I. A., Alizadeh, A. R., Whitmire, K. H., et al. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta09389b · Cited by 66
Self-citationTeomete, E. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/7/075024 · Cited by 63
Identification of Binding Peptides on Calcium Silicate Hydrate: A Novel View on Cement Additives
Picker, A., Nicoleau, L., Nonat, A., Labbez, C., & Cölfen, H. (2014) · Advanced Materials · doi:10.1002/adma.201303345 · Cited by 60
Self-citationOwens, A., & Weck, O. L. D. (2016) · AIAA SPACE 2016 · doi:10.2514/6.2016-5394 · Cited by 59
Bullard, J. W., Lothenbach, B., Stutzman, P. E., & Snyder, K. A. (2011) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2010.41 · Cited by 58
Self-citationStructure and Formation of Magnesium Oxychloride Sorel Cements
Tooper, B., & Cartz, L. (1966) · Nature · doi:10.1038/211064a0 · Cited by 55
Simmons, J. P., Chuang, P. D., Comer, M. L., Spowart, J. E., Uchic, M. D., & Graef, M. D. (2008) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/17/2/025002 · Cited by 53
Zhang, N., & Shahsavari, R. (2016) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2016.07.021 · Cited by 52
Self-citationStrength and Durability Performance of Waterless Lunar Concrete
Toutanji, H., Glenn-Loper, B., & Schrayshuen, B. (2005) · 43rd AIAA Aerospace Sciences Meeting and Exhibit · doi:10.2514/6.2005-1436 · Cited by 51
Online monitoring of highway bridge construction using fiber Bragg grating sensors
Lin, Y. B., Pan, C. L., Kuo, Y. H., Chang, K. C., & Chern, J. (2005) · Smart Materials and Structures · doi:10.1088/0964-1726/14/5/046 · Cited by 51
Towards Robotic Swarm Printing
Oxman, N., Duro‐Royo, J., Keating, S. J., Peters, B., & Tsai, E. (2014) · Architectural Design · doi:10.1002/ad.1764 · Cited by 47
Electronic Origin of Doping-Induced Enhancements of Reactivity: Case Study of Tricalcium Silicate
Huang, J., Wang, B., Yu, Y., Valenzano, L., Bauchy, M., & Sant, G. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b08286 · Cited by 44
Self-citationGuo, P., Wang, B., Bauchy, M., & Sant, G. (2016) · Crystal Growth & Design · doi:10.1021/acs.cgd.5b01740 · Cited by 42
Self-citationDiebold, F. X. (2010) · Cambridge University Press eBooks · doi:10.1017/cbo9780511610264.005 · Cited by 42
Hoheneder, J., Flores-Vivián, I., Lin, Z., et al. (2014) · Composites Part B Engineering · doi:10.1016/j.compositesb.2014.12.028 · Cited by 41
Zhang, N., Carrez, P., & Shahsavari, R. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b13107 · Cited by 41
Self-citationWaste Management Models and Their Applications on Construction Sites
Dajadian, S. A., Koch, D. C., & Bechtel Corp (2014) · International Journal of Construction Engineering and Management · Cited by 40
A Novel Strategy for Carbon Capture and Sequestration by rHLPD Processing
Li, Q., Gupta, S., Tang, L., Quinn, S., Atakan, V., & Riman, R. E. (2016) · Frontiers in Energy Research · doi:10.3389/fenrg.2015.00053 · Cited by 39
Portland Cement: Composition, Production and Properties, 2nd edition
Bye, G. C. (1999) · doi:10.1680/pccpap.27664 · Cited by 38
The effect of polycations on early cement paste
Pochard, I., Labbez, C., Nonat, A., Vija, H., & Jönsson, B. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.06.002 · Cited by 36
Data-Driven Model for Estimation of Friction Coefficient Via Informatics Methods
Bucholz, E. W., Kong, C. S., Marchman, K. R., Sawyer, W. G., Phillpot, S. R., Sinnott, S. B., & Rajan, K. (2012) · Tribology Letters · doi:10.1007/s11249-012-9975-y · Cited by 36
Revised Atomistic Models of the Crystal Structure of C–S–H with high C/S Ratio
Kovačević, G., Nicoleau, L., Nonat, A., & Veryazov, V. (2016) · Zeitschrift für Physikalische Chemie · doi:10.1515/zpch-2015-0718 · Cited by 33
Self-citationGálvez‐Martos, J., Morrison, J., Jauffret, G., Elsarrag, E., Alhorr, Y. M., Imbabi, M. S., & Glasser, F. P. (2016) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2015.12.008 · Cited by 31
Self-citationStability of Negatively Charged Platelets in Calcium-Rich Anionic Copolymer Solutions
Turesson, M., Nonat, A., & Labbez, C. (2014) · Langmuir · doi:10.1021/la501228w · Cited by 23
Kayello, H. M., Tadisina, N. K. R., Shlonimskaya, N., Biernacki, J. J., & Visco, D. P. (2013) · Journal of the American Ceramic Society · doi:10.1111/jace.12453 · Cited by 21
Self-citationModeling early-age hydration kinetics of Portland cement using flexible neural tree
Wang, L., Yang, B., Chen, Y., Zhao, X., Chang, J., & Wang, H. (2010) · Neural Computing and Applications · doi:10.1007/s00521-010-0475-4 · Cited by 19
Wang, X., Ran, Q., Yang, Y., Shu, X., & Yu, C. B. (2016) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001627 · Cited by 16
New Glass Fiber Reinforced Concrete for Extraterrestrial Application
Toutanji, H. A., Schrayshuen, B., & Han, M. (2006) · ASCE International Conference on Engineering, Science, Construction, and Operations in Challenging Environments (Earth and Space) · doi:10.1061/40830(188)145 · Cited by 11
New Fiber Reinforced Waterless Concrete for Extraterrestrial Structural Applications
Toutanji, H. A., Tucker, D. S., & Ethridge, E. C. (2005) · NASA Technical Reports Server (NASA) · Cited by 1
Cited by
Monteiro, P. J. M., Miller, S. A., & Horvath, A. (2017) · Nature Materials · doi:10.1038/nmat4930 · Cited by 1,454
3-D printing of concrete: Beyond horizons
Khan, M. S., Sanchez, F., & Zhou, H. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106070 · Cited by 260
Self-citationClinkering-free cementation by fly ash carbonation
Wei, Z., Wang, B., Falzone, G., La Plante, E. C., Okoronkwo, M. U., She, Z., Oey, T., Balonis, M., Neithalath, N., Pilon, L., et al. (2018) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.11.005 · Cited by 105
Self-citationKupwade-Patil, K., Boul, P. J., Rasner, D. K., Everett, S. M., Proffen, T., Page, K., Ma, D., Olds, D., Thaemlitz, C. J., & Büyüköztürk, O. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105920 · Cited by 30
Metadata
- Authors
- Biernacki, J. J., Bullard, J. W., Sant, G., Brown, K., Glasser, F. P., Jones, S., Ley, T., Livingston, R., Nicoleau, L., Olek, J., Sanchez, F., Shahsavari, R., Stutzman, P. E., Sobolev, K., & Prater, T.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 2017-05-22
- Volume
- 100
- Issue
- 7
- Pages
- 2746-2773
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W2607650933
- Cited by
- 276
- References
- 147
- FWCI
- 21.41
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.