The DOI matches its Crossref record; 92 of the 92 references it cites were found in a registry or an index.
Blockchain in Additive Manufacturing and its Impact on Supply Chains
Abstract
Additive manufacturing (AM) appears to be a particularly attractive use case for blockchain. This research combines inductive in‐depth interviews with the Delphi method to explore what potentials blockchain technology in AM creates, which adoption barriers firms need to overcome, and how supply chains will be affected by the integration of these two potentially disruptive technologies. The results suggest opportunities that are related to intellectual property (IP) rights management, the monitoring of printed parts throughout their lifecycle, process improvements, and data security. The most important barriers for blockchain adoption in AM are an absence of blockchain‐skilled specialists on the labor market, missing governance mechanisms, and a lack of firm‐internal technical expertise. By addressing important limitations of AM, blockchain is expected to improve the competitiveness of AM in parts’ production, catalyzing the trend toward more decentralized manufacturing resulting in more agile, resilient, and flexible supply chains and reduced logistics costs. Beyond that, blockchain‐based AM platforms are expected to enhance supply chain visibility, drive supply chain digitalization, support supply chain finance, and contribute to the emergence of shared factory systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Individual Comparisons by Ranking Methods
Wilcoxon, F. (1945) · Biometrics Bulletin · doi:10.2307/3001968 · Cited by 15,354
On a Test of Whether one of Two Random Variables is Stochastically Larger than the Other
Mann, H. B., & Whitney, D. R. (1947) · The Annals of Mathematical Statistics · doi:10.1214/aoms/1177730491 · Cited by 14,320
Use of Ranks in One-Criterion Variance Analysis
Kruskal, W. H., & Wallis, W. A. (1952) · Journal of the American Statistical Association · doi:10.1080/01621459.1952.10483441 · Cited by 13,912
Seeking Qualitative Rigor in Inductive Research: Notes on the Gioia Methodology
Gioia, D. A., Corley, K. G., & Hamilton, A. L. (2013) · Organizational Research Methods · doi:10.1177/1094428112452151 · Cited by 13,227
Handbook of qualitative research
Griffin, T. F. (1999) · Psychology and Marketing · doi:10.1002/(sici)1520-6793(199907)16:4<371::aid-mar7>3.0.co;2-k · Cited by 9,037
An Experimental Application of the DELPHI Method to the Use of Experts
Dalkey, N., & Helmer, O. (1963) · Management Science · doi:10.1287/mnsc.9.3.458 · Cited by 6,061
Research guidelines for the Delphi survey technique
Hasson, F. (2000) · Journal of Advanced Nursing · doi:10.1046/j.1365-2648.2000.01567.x · Cited by 5,951
Schuenemeyer, J. H. (1989) · Technometrics · doi:10.1080/00401706.1989.10488578 · Cited by 4,816
The Delphi method as a research tool: an example, design considerations and applications
Okoli, C., & Pawlowski, S. D. (2004) · Information & Management · doi:10.1016/j.im.2003.11.002 · Cited by 4,771
Blockchains and smart contracts for the internet of things
Christidis, K., & Devetsikiotis, M. (2016) · IEEE Access · doi:10.1109/access.2016.2566339 · Cited by 4,552
The Delphi Technique: Making Sense of Consensus
Hsu, C.-C., & Sandford, B. A. (2007) · University of Massachusetts Amherst · doi:10.7275/pdz9-th90 · Cited by 4,500
Blockchain technology and its relationships to sustainable supply chain management
Saberi, S., Kouhizadeh, M., Sarkis, J., & Shen, L. (2019) · International Journal of Production Research · doi:10.1080/00207543.2018.1533261 · Cited by 4,118
(2015) · Cited by 3,471
Gibson, I., Rosen, D., & Stucker, B. (2015) · doi:10.1007/978-1-4939-2113-3 · Cited by 3,299
Methodological fit in management field research
Edmondson, A. C., & Mcmanus, S. E. (2007) · Academy of Management Review · doi:10.5465/amr.2007.26586086 · Cited by 3,227
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Information Rules: A Strategic Guide to the Network Economy
Becker, W. E., Shapiro, C., & Varian, H. R. (1999) · The Journal of Economic Education · doi:10.2307/1183273 · Cited by 2,557
3-D printing: The new industrial revolution
Berman, B. (2012) · Business Horizons · doi:10.1016/j.bushor.2011.11.003 · Cited by 2,481
Where Is Current Research on Blockchain Technology?—A Systematic Review
Yli-Huumo, J., Ko, D., Choi, S., Park, S., & Smolander, K. (2016) · PLOS ONE · doi:10.1371/journal.pone.0163477 · Cited by 2,317
1 Blockchain’s roles in meeting key supply chain management objectives
Kshetri, N. (2018) · International Journal of Information Management · doi:10.1016/j.ijinfomgt.2017.12.005 · Cited by 2,149
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Consensus measurement in Delphi studies
von der Gracht, H. A. (2012) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2012.04.013 · Cited by 1,831
(2022) · Research Methods · doi:10.1142/9789811256943_0011 · Cited by 1,655
Waller, M. A., & Fawcett, S. E. (2013) · Journal of Business Logistics · doi:10.1111/jbl.12010 · Cited by 1,522
Shaping the digital twin for design and production engineering
Schleich, B., Anwer, N., Mathieu, L., & Wartzack, S. (2017) · CIRP Annals · doi:10.1016/j.cirp.2017.04.040 · Cited by 1,305
Mitigating supply chain risk through improved confidence
Christopher, M., & Lee, H. (2004) · International Journal of Physical Distribution & Logistics Management · doi:10.1108/09600030410545436 · Cited by 1,249
Wang, Y., Han, J. H., & Beynon-Davies, P. (2019) · Supply Chain Management: An International Journal · doi:10.1108/scm-03-2018-0148 · Cited by 1,210
How Do Suppliers Benefit from Information Technology Use in Supply Chain Relationships?1
Subramani, M. (2004) · MIS Quarterly · doi:10.2307/25148624 · Cited by 1,101
The influence of relational competencies on supply chain resilience: a relational view
Wieland, A., & Wallenburg, C. M. (2013) · International Journal of Physical Distribution & Logistics Management · doi:10.1108/ijpdlm-08-2012-0243 · Cited by 1,060
The antecedents of supply chain agility of a firm: Scale development and model testing
Swafford, P. M., Ghosh, S., & Murthy, N. (2006) · Journal of Operations Management · doi:10.1016/j.jom.2005.05.002 · Cited by 1,001
Wu, F., Yeniyurt, S., Kim, D., & Cavusgil, S. T. (2006) · Industrial Marketing Management · doi:10.1016/j.indmarman.2005.05.003 · Cited by 941
Kache, F., & Seuring, S. (2017) · International Journal of Operations & Production Management · doi:10.1108/ijopm-02-2015-0078 · Cited by 938
Treiblmaier, H. (2018) · Supply Chain Management: An International Journal · doi:10.1108/scm-01-2018-0029 · Cited by 928
Blockchain technology for enhancing supply chain resilience
Min, H. (2019) · Business Horizons · doi:10.1016/j.bushor.2018.08.012 · Cited by 887
Devaraj, S., Krajewski, L., & Wei, J. C. (2007) · Journal of Operations Management · doi:10.1016/j.jom.2007.01.002 · Cited by 807
Blockchain and supply chain relations: A transaction cost theory perspective
Schmidt, C. G., & Wagner, S. M. (2019) · Journal of Purchasing and Supply Management · doi:10.1016/j.pursup.2019.100552 · Cited by 705
Self-citationAntecedents of supply chain visibility in retail supply chains: A resource‐based theory perspective
Barratt, M., & Oke, A. (2007) · Journal of Operations Management · doi:10.1016/j.jom.2007.01.003 · Cited by 702
Additive manufacturing in the spare parts supply chain
Khajavi, S. H., Partanen, J., & Holmström, J. (2014) · Computers in Industry · doi:10.1016/j.compind.2013.07.008 · Cited by 683
Towards blockchain-based intelligent transportation systems
Yuan, Y., & Wang, F.-Y. (2016) · 2016 IEEE 19th International Conference on Intelligent Transportation Systems (ITSC) · doi:10.1109/itsc.2016.7795984 · Cited by 671
Overview on Additive Manufacturing Technologies
Calignano, F., Manfredi, D., Ambrosio, E. P., Biamino, S., Lombardi, M., Atzeni, E., Salmi, A., Minetola, P., Iuliano, L., & Fino, P. (2017) · Proceedings of the IEEE · doi:10.1109/jproc.2016.2625098 · Cited by 640
Assessing unidimensionality: A comparison of Rasch Modeling, Parallel Analysis, and TETRAD
Yu, C. H., Popp, S. E. O., DiGangi, S. A., & Jannasch-Pennell, A. K. (2020) · doi:10.7275/q7g0-vt50 · Cited by 626
Toyoda, K., Mathiopoulos, P. T., Sasase, I., & Ohtsuki, T. (2017) · IEEE Access · doi:10.1109/access.2017.2720760 · Cited by 580
Direct digital manufacturing: definition, evolution, and sustainability implications
Chen, D., Heyer, S., Ibbotson, S., Salonitis, K., Steingrímsson, J. G., & Thiede, S. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.05.009 · Cited by 498
Schoenherr, T., & Speier‐Pero, C. (2015) · Journal of Business Logistics · doi:10.1111/jbl.12082 · Cited by 492
Jiang, R., Kleer, R., & Piller, F. T. (2017) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2017.01.006 · Cited by 480
Bogers, M., Hadar, R., & Bilberg, A. (2016) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2015.07.024 · Cited by 457
Leveraging supply chain visibility for responsiveness: The moderating role of internal integration
Williams, B. D., Roh, J., Tokar, T., & Swink, M. (2013) · Journal of Operations Management · doi:10.1016/j.jom.2013.09.003 · Cited by 454
Rapid manufacturing in the spare parts supply chain: Alternative approaches to capacity deployment
Holmström, J., Partanen, J., Tuomi, J., & Walter, M. (2010) · Journal of Manufacturing Technology Management · doi:10.1108/17410381011063996 · Cited by 431
Strategic value of RFID in supply chain management
Tajima, M. (2007) · Journal of Purchasing and Supply Management · doi:10.1016/j.pursup.2007.11.001 · Cited by 413
How Blockchain Will Change Organizations
Tapscott, D., & Tapscott, A. (2018) · What the Digital Future Holds · doi:10.7551/mitpress/11645.003.0010 · Cited by 375
Wuttke, D. A., Blome, C., & Henke, M. (2013) · International Journal of Production Economics · doi:10.1016/j.ijpe.2013.05.031 · Cited by 369
Blockchain - the Gateway to Trust-Free Cryptographic Transactions.
Beck, R., Czepluch, J. S., Lollike, N., & Malone, S. (2016) · IT University Of Copenhagen (IT University of Copenhagen) · Cited by 363
Roßmann, B., Canzaniello, A., von der Gracht, H., & Hartmann, E. (2018) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2017.10.005 · Cited by 280
Gligor, D., Gligor, N., Holcomb, M., & Bozkurt, S. (2019) · The International Journal of Logistics Management · doi:10.1108/ijlm-10-2017-0259 · Cited by 267
Liu, P., Huang, S. H., Mokasdar, A., Zhou, H., & Hou, L. (2014) · Production Planning & Control · doi:10.1080/09537287.2013.808835 · Cited by 265
Wu, Y., Cegielski, C. G., Hazen, B. T., & Hall, D. J. (2013) · Journal of Supply Chain Management · doi:10.1111/j.1745-493x.2012.03287.x · Cited by 249
A systematic assessment of rigor in information systems ranking-type Delphi studies
Paré, G., Cameron, A.-F., Poba-Nzaou, P., & Templier, M. (2013) · Information & Management · doi:10.1016/j.im.2013.03.003 · Cited by 244
How Research in Production and Operations Management May Evolve in the Era of Big Data
Feng, Q., & Shanthikumar, J. G. (2018) · Production and Operations Management · doi:10.1111/poms.12836 · Cited by 243
The direct digital manufacturing (r)evolution: definition of a research agenda
Holmström, J., Holweg, M., Khajavi, S. H., & Partanen, J. (2016) · Operations Management Research · doi:10.1007/s12063-016-0106-z · Cited by 223
The impact of additive manufacturing on supply chains
Durach, C. F., Kurpjuweit, S., & Wagner, S. M. (2017) · International Journal of Physical Distribution & Logistics Management · doi:10.1108/ijpdlm-11-2016-0332 · Cited by 221
Self-citationBen-Ner, A., & Siemsen, E. (2017) · California Management Review · doi:10.1177/0008125617695284 · Cited by 219
The 3D printing order: variability, supercenters and supply chain reconfigurations
Sasson, A., & Johnson, J. C. (2016) · International Journal of Physical Distribution & Logistics Management · doi:10.1108/ijpdlm-10-2015-0257 · Cited by 208
3D printing services: classification, supply chain implications and research agenda
Rogers, H., Baricz, N., & Pawar, K. S. (2016) · International Journal of Physical Distribution & Logistics Management · doi:10.1108/ijpdlm-07-2016-0210 · Cited by 208
Improving the Delphi process: Lessons from social psychological research
Bolger, F., & Wright, G. (2011) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2011.07.007 · Cited by 201
The benefits of supply chain visibility: A value assessment model
Caridi, M., Moretto, A., Perego, A., & Tumino, A. (2014) · International Journal of Production Economics · doi:10.1016/j.ijpe.2013.12.025 · Cited by 194
The Supply Chain Becomes the Demand Chain
Christopher, M., & Ryals, L. J. (2014) · Journal of Business Logistics · doi:10.1111/jbl.12037 · Cited by 186
Lu, H.-P., & Weng, C.-I. (2018) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2018.03.005 · Cited by 171
Fawcett, S. E., & Waller, M. A. (2014) · Journal of Business Logistics · doi:10.1111/jbl.12058 · Cited by 169
Oettmeier, K., & Hofmann, E. (2016) · Journal of Business Economics · doi:10.1007/s11573-016-0806-8 · Cited by 165
Security of additive manufacturing: Attack taxonomy and survey
Yampolskiy, M., King, W. E., Gatlin, J., Belikovetsky, S., Brown, A., Skjellum, A., & Elovici, Y. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.03.015 · Cited by 158
The prediction of air travel and aircraft technology to the year 2000 using the Delphi method
English, J. M., & Kernan, G. L. (1976) · Transportation Research · doi:10.1016/0041-1647(76)90094-0 · Cited by 155
How 3D printing technology changes the rules of the game: Insights from the construction sector
Kothman, I., & Faber, N. R. (2016) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-01-2016-0010 · Cited by 155
Chan, F. T. S., & Chong, A. Y. (2012) · International Journal of Production Research · doi:10.1080/00207543.2012.693961 · Cited by 151
Impact of additive manufacturing on aircraft supply chain performance
Ghadge, A., Karantoni, G., Chaudhuri, A., & Srinivasan, A. (2018) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-07-2017-0143 · Cited by 139
Demand chain management theory: constraints and development from global aerospace supply webs
Williams, T., Maull, R., & Ellis, B. W. C. (2002) · Journal of Operations Management · doi:10.1016/s0272-6963(02)00035-9 · Cited by 133
3D printing the future: scenarios for supply chains reviewed
Ryan, M. J., Eyers, D. R., Potter, A. T., Purvis, L., & Gosling, J. (2017) · International Journal of Physical Distribution & Logistics Management · doi:10.1108/ijpdlm-12-2016-0359 · Cited by 131
Streamlining the additive manufacturing digital spectrum: A systems approach
Kim, D. B., Witherell, P., Lipman, R. R., & Feng, S. C. (2014) · Additive manufacturing · doi:10.1016/j.addma.2014.10.004 · Cited by 128
Additive manufacturing’s impact and future in the aviation industry
Wagner, S. M., & Walton, R. O. (2016) · Production Planning & Control · doi:10.1080/09537287.2016.1199824 · Cited by 128
Self-citationCao, Q., Jones, D. R., & Sheng, H. (2014) · Information & Management · doi:10.1016/j.im.2013.11.007 · Cited by 126
Big Data and the Innovation Cycle
Lee, H. L. (2018) · Production and Operations Management · doi:10.1111/poms.12845 · Cited by 86
Timing of RFID Adoption in a Supply Chain
Whang, S. (2009) · Management Science · doi:10.1287/mnsc.1090.1121 · Cited by 82
Wowak, K. D., Craighead, C. W., & Ketchen, D. J. (2016) · Journal of Business Logistics · doi:10.1111/jbl.12125 · Cited by 77
Additive manufacturing in the mechanical engineering and medical industries spare parts supply chain
Muir, M., & Haddud, A. (2017) · Journal of Manufacturing Technology Management · doi:10.1108/jmtm-01-2017-0004 · Cited by 76
On the Inattention to Digital Confidentiality in Operations and Supply Chain Research
Massimino, B., Gray, J., & Lan, Y. (2018) · Production and Operations Management · doi:10.1111/poms.12879 · Cited by 69
Richardson, D. A., de Leeuw, S., & Dullaert, W. E. H. (2016) · Journal of Business Logistics · doi:10.1111/jbl.12112 · Cited by 65
dr0wned - Cyber-Physical Attack with Additive ManufacturingPreprint
Belikovetsky, S., Yampolskiy, M., Toh, J., & Elovici, Y. (2016) · arXiv (Cornell University) · doi:10.48550/arxiv.1609.00133 · Cited by 38
Leveraging Big Data to Develop Supply Chain Management Theory: The Case of Panel Data
Miller, J. W., Ganster, D. C., & Griffis, S. E. (2018) · Journal of Business Logistics · doi:10.1111/jbl.12188 · Cited by 30
fast16 as a Second-Order Subversion AttackPreprint
Bilar, D. Y. (2026) · doi:10.5281/zenodo.19901496 · Cited by 28
Firm Performance Impacts of Digitally Enabled Supply Chain Integration Capabilities1
Rai, A., Patnayakuni, R., & Seth, N. (2006) · MIS Quarterly · doi:10.2307/25148729 · Cited by 27
Kurpjuweit, S., Reinerth, D., & Wagner, S. M. (2018) · Research-Technology Management · doi:10.1080/08956308.2018.1399025 · Cited by 24
Self-citationRamkumar, M., & Jenamani, M. (2015) · Service Science · doi:10.1287/serv.2015.0110 · Cited by 21
VALUE OF DECENTRALIZED CONSENSUS SYSTEMS – EVALUATION FRAMEWORK
Brenig, C., Schwarz, J. A., & Rückeshäuser, N. (2016) · TUbilio (Technical University of Darmstadt) · Cited by 13
Cited by
Blockchain technology and the sustainable supply chain: Theoretically exploring adoption barriers
Kouhizadeh, M., Saberi, S., & Sarkis, J. (2021) · International Journal of Production Economics · doi:10.1016/j.ijpe.2020.107831 · Cited by 1,471
A review of Blockchain Technology applications for financial services
Javaid, M., Haleem, A., Singh, R. P., Suman, R., & Khan, S. (2022) · BenchCouncil Transactions on Benchmarks, Standards and Evaluations · doi:10.1016/j.tbench.2022.100073 · Cited by 470
Khan, S. A. R., Razzaq, A., Yu, Z., & Miller, S. (2021) · Business Strategy and the Environment · doi:10.1002/bse.2853 · Cited by 404
RetractedBlockchain-Secured Smart Manufacturing in Industry 4.0: A Survey
Leng, J., Ye, S., Zhou, M., Zhao, J. L., Liu, Q., Guo, W., Cao, W., & Fu, L. (2021) · IEEE Transactions on Systems, Man, and Cybernetics: Systems · doi:10.1109/tsmc.2020.3040789 · Cited by 284
Flechsig, C., Anslinger, F., & Lasch, R. (2022) · Journal of Purchasing and Supply Management · doi:10.1016/j.pursup.2021.100718 · Cited by 227
Metadata
- Authors
- Kurpjuweit, S., Schmidt, C. G., Klöckner, M., & Wagner, S. M.
- Venue
- Journal of Business Logistics
- Publisher
- Wiley
- Published
- 2019-10-27
- Volume
- 42
- Issue
- 1
- Pages
- 46-70
- ISSN
- 0735-3766 (ISSN-L)
- 2158-1592
- OpenAlex
- W2981377653
- Cited by
- 305
- References
- 92
- FWCI
- 38.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.