Two-Way and Multiple-Way Shape Memory Polymers for Soft Robotics: An Overview
Open accessThe DOI matches its Crossref record; 300 of the 312 references it cites were found in a registry or an index; 37 of the 187 sources its claims cite were checked for support.
Abstract
Two-way and multiple-way shape memory polymers offer unique opportunities to realize untethered soft robots with programmable morphology and/or properties, repeatable actuation, and advanced multi-functionalities.
Overview
CoChat Summary
TL;DR
This review surveys thermo-responsive two-way and multiple-way shape memory polymers (SMPs) for programmable soft robotics, covering materials, manufacturing, working mechanisms, applications, and modeling/simulation. It concludes that these SMPs enable reversible and sequential shape changes, but real-world soft robotic examples remain limited and key manufacturing, characterization, and modeling gaps persist.
Key findings
- Two-way SMPs under constant stress include semi-crystalline networks and liquid crystalline elastomers (LCEs); semi-crystalline networks can show reversible strain variations between 10% and 100% under moderate stresses (typically hundreds of kPa to a few MPa), while LCEs may be strained up to 400%, exert stresses between 0.01 and 0.12 MPa, have elastic moduli between 0.1 and 5 MPa, and response times greater than 10 s.
- Stress-free two-way SMPs generally achieve recoverable actuation strains between 10% and 20%; two-way shape memory composites/laminates have limited reversible strain change, generally lower than 10%.
- Multiple-way SMPs can be designed by incorporating two or more well-separated transition temperatures or a broad glass/melting transition (temperature-memory effect); some multiple-SME SMPs reach strains of about 1000% with high shape fixity and recovery.
- For comparison, one-way SMPs may be strained up to about 800% before failure, have elastic-energy densities between 10 and 2000 MJ/m³ for strains approaching 200%, exert stresses between 0.1 and 10 MPa, and have response times greater than 10 s.
Methods
- Design: narrative review/overview of thermo-responsive two-way and multiple-way SMPs and their use in programmable soft robotics.
- Data/sample: published literature and reported examples of SMP-based soft robots and actuators; no primary experimental sample or dataset is introduced.
- Main analysis: thematic synthesis of base materials, manufacturing processes (including 3D/4D printing), working mechanisms (single-material and multi-material), applications, and modeling/simulation approaches.
Limitations
- The paper states that real-world programmable soft robots based on two-way and multiple-way SMPs remain few, that standards are lacking especially for 3D printed SMPs, and that manufacturing techniques for complex components are limited.
- The paper states that constitutive models for multiple-way and two-way SMPs are still limited, especially in the three-dimensional finite strain framework and for two-way LCEs and stress-free two-way SMPs; to the author’s knowledge, no works currently model the stress-free two-way SME.
- Evident from the text: this is a narrative overview rather than a systematic review or meta-analysis, and many quantitative claims are drawn from cited studies rather than from new experiments.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
29 Valid · 10 Not valid · 59 Not checked · 52 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“the first example of 3D printed multiple-way SMPs was provided by Wu et al. [206], who fabricated layered composite structures with SMPs having different glass transition temperatures, by using a multi-material Polyjet 3D printer.”
- Also stated in: § 3. Manufacturing · plain
“Following this idea, the first example of 3D printed multiple-way SMPs was provided by Wu et al. [206], who fabricated layered composite structures with SMPs having different glass transition temperatures, by using a multi-material Polyjet 3D printer.”
What the sources say
- Partly supportedcites [206] Wu, 2016, Multi-shape active composites by 3D printing of digital shape memory polymers, Sci. Rep. sourceExperimental — accuracy not yet measured
The Abstract (page unavailable) describes Wu et al.'s 3D-printed layered composites with SMP fibers having different glass transition temperatures and a multi-shape memory effect. Results > Design concepts and Methods > Fabrication of materials (pages unavailable) identify a multi-material Objet printer. The paper does not establish that this was the first example of 3D-printed multiple-way SMPs; it also mentions earlier work on 3D-printed digital SMPs that produced sequential shape changes. (LLM, conf=0.86)
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 3. Manufacturing · plain
Every source the paper cites for this claim was checked and supports it.
In the paper
“Mirtschin et al. [96] studied how programming parameters such as the strain rate and temperature holding time at the deformation temperature allow one to gain precise control of the TME in semi-crystalline polyurethanes and to design the TME under stress-free recovery conditions.”
What the sources say
- Supportedcites [96] Mirtschin, 2015, Designing temperature-memory effects in semicrystalline polyurethane, RSC Adv. source
The Conclusions state that changing strain rate and holding time at the deformation temperature provided precise control over temperature-memory behavior in semicrystalline polyurethane and allowed TMEs to be designed under stress-free recovery conditions. The Results and discussion also examine both programming parameters and stress-free recovery. (LLM, conf=0.95)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Supported
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Such an approach has been largely employed to achieve multiple-way SMPs with a broad glass transition [82-92] and a broad melting transition [93-95] as the switching transition.”
What the sources say
- Not checked — no full text of the sourcecites [82] Miaudet, 2007, Shape and temperature memory of nanocomposites with broadened glass transition, Science source
- Not checked — no full text of the sourcecites [83] Xie, 2010, Tunable polymer multi-shape memory effect, Nature source
- Not checked — no full text of the sourcecites [84] Xie, 2011, Strain-Based Temperature Memory Effect for Nafion and Its Molecular Origins, Adv. Funct. Mater. source
- Not checked — no full text of the sourcecites [85] Li, 2012, A Versatile Polymer Co-Network with Broadened Glass Transition Showing Adjustable Multiple Shape Memory Effect, Macromol. Chem. Phys. source
- Not checked — no full text of the sourcecites [86] Shao, 2012, Multishape memory effect of norbornene-based copolymers with cholic acid pendant groups, Macromolecules source
- Partly supportedcites [87] Ware, 2012, Triple-shape memory polymers based on self-complementary hydrogen bonding, Macromolecules sourceExperimental — accuracy not yet measured
The Introduction (page unavailable) discusses multiple-shape memory and mentions a broad-transition example. But the Conclusions describe this paper’s own triple-shape system as using a glass transition together with hydrogen-bond dissociation—not a broad glass transition as the switching transition. The paper therefore supports the general multiple-shape context, but not the claimed approach for this system. (LLM, conf=0.85)
- Not checked — no full text of the sourcecites [88] Samuel, 2014, Designing multiple-shape memory polymers with miscible polymer blends: Evidence and origins of a triple-shape memory effect for miscible PLLA/PMMA blends, Macromolecules source
- Not checked — no full text of the sourcecites [89] Wang, 2015, Biocompound-based multiple shape memory polymers reinforced by photo-cross-linking, ACS Biomater. Sci. Eng. source
- Not checked — no full text of the sourcecites [90] Zhang, 2016, Triple-shape memory effects of bismaleimide based thermosetting polymer networks prepared via heterogeneous crosslinking structures, RSC Adv. source
- Not checked — no full text of the sourcecites [91] Zheng, 2017, Catalyst-free thermoset polyurethane with permanent shape reconfigurability and highly tunable triple shape memory performance, ACS Macro Lett. source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The sources with a verdict support this claim; the rest weren’t checked yet, have no full text we could read, or their verdicts aren’t rated yet.
In the paper
“The two-stage cross-linking method has been used to fabricate stress-free two-way SMPs, i.e., class (ii); e.g., in [136-138].”
What the sources say
- Not checked — no full text of the sourcecites [136] Wu, 2014, Two-way shape memory polymer with “switch–spring” composition by interpenetrating polymer network, J. Mater. Chem. source
- Supportedcites [137] Meng, 2015, Shape actuation via internal stress-induced crystallization of dual-cure networks, ACS Macro Lett. source
The synthesis passage describes two stages of cross-linking, and the actuator passage reports reversible elongation and contraction after removal of the applied load. Figure 1 calls the resulting devices “stressfree actuators”; here, stress-free means no external load, not an absence of internal stress. (LLM, conf=0.94)
- Not checked — no full text of the sourcecites [138] Fan, 2017, A facile approach toward scalable fabrication of reversible shape-memory polymers with bonded elastomer microphases as internal stress provider, Macromol. Rapid Commun. source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“This strategy has also allowed for the development of laminated polymers with double SMP layers exhibiting two-way SME also under stress-free condition [154-156].”
What the sources say
- Partly supportedcites [154] Kang, 2012, Two-way actuation behavior of shape memory polymer/elastomer core/shell composites, Smart Mater. Struct. sourceExperimental — accuracy not yet measured
The Conclusions report reversible two-way actuation in SMPU/SBS core/shell composites, and the schematic in §2.1 labels heating and cooling as occurring at zero external stress. But §2.2 describes one SMPU film coated with an SBS elastomer, not a laminate with double SMP layers. The Introduction’s laminate example likewise pairs an SMP film with an elastomeric film. (LLM, conf=0.88)
- Not checked — no full text of the sourcecites [155] Imai, 2013, An actuator of two-way behavior by using two kinds of shape memory polymers with different Tgs, Precis. Eng. source
- Partly supportedcites [156] Taya, 2013, Design of two-way reversible bending actuator based on a shape memory alloy/shape memory polymer composite, Smart Mater. Struct. sourceExperimental — accuracy not yet measured
Section 3 (page unavailable) models a three-layer laminate with two outer SMP layers, and the Conclusion (page unavailable) reports repeatable two-way bending. The active center layer contains SMA wires, however, so the paper does not establish two-way shape memory in a polymer-only laminate. The cited passages also do not establish the claimed stress-free condition. (LLM, conf=0.82)
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
58 more claims · 12 with their cited sources checked
Create a free account to see all 150 claims and every source verdict.
- It may state two separate claims as one. 48
- Probably not a substantial claim. 48
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 2.3. Two-Way SMPs
“such that Tm ,1 > Tm ,2 .”
§ 2.3. Two-Way SMPs
“(v) heating the material up to Tm ,2 > T 3 > Tm ,1 under stress-free conditions.”
Citations
Cites
Items 201–300 of 300
Progress in actively moving polymers
Lendlein, A. (2010) · Journal of Materials Chemistry · doi:10.1039/c004361n · Cited by 73
Preparation of Liquid Crystalline Elastomers
Brömmel, F., Kramer, D., & Finkelmann, H. (2012) · Advances in polymer science · doi:10.1007/12_2012_168 · Cited by 71
Yang, G., Liu, X., Tok, A. I. Y., & Lipik, V. (2017) · Polymer Chemistry · doi:10.1039/c7py00786h · Cited by 71
Rotary Actuators Based on Pneumatically Driven Elastomeric Structures
Gong, X., Yang, K., Xie, J., Wang, Y., Kulkarni, P., Hobbs, A. S., & Mazzeo, A. D. (2016) · Advanced Materials · doi:10.1002/adma.201600660 · Cited by 70
Untethered Soft Actuators by Liquid–Vapor Phase Transition: Remote and Programmable Actuation
Han, J., Jiang, W., Niu, D., Li, Y., Zhang, Y., Lei, B., Liu, H., Shi, Y., Chen, B., Yin, L., et al. (2019) · Advanced Intelligent Systems · doi:10.1002/aisy.201900109 · Cited by 70 · cited 1×
“, [32]); (ii) shape memory soft materials, in which shape-shifting is not encoded in the original material structure, but programming of complex shape variations is allowed on demand (e.”
BackgroundTwo-way shape memory behavior of shape memory polyurethanes with a bias load
Hong, S. J., Yu, W.-R., & Youk, J. H. (2010) · Smart Materials and Structures · doi:10.1088/0964-1726/19/3/035022 · Cited by 69
Three-Dimensionally Printed Mechanical Metamaterials With Thermally Tunable Auxetic Behavior
Zhao, Z., Yuan, C., Lei, M., Yang, L., Zhang, Q., Chen, H., Qi, H. J., & Fang, D. (2019) · Physical Review Applied · doi:10.1103/physrevapplied.11.044074 · Cited by 69
Two-way shape memory behavior of semi-crystalline elastomer under stress-free condition
Qian, C., Dong, Y., Zhu, Y., & Fu, Y. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/8/085023 · Cited by 68
High performance and tunable artificial muscle based on two-way shape memory polymer
Fan, J., & Li, G. (2017) · RSC Advances · doi:10.1039/c6ra25024f · Cited by 68
Active Origami: Modeling, Design, and Applications
Hernandez, E. A. P., Hartl, D. J., & Lagoudas, D. C. (2018) · Springer eBooks · doi:10.1007/978-3-319-91866-2 · Cited by 68
Sun, Y.-C., Wan, Y., Nam, R., Chu, M., & Naguib, H. E. (2019) · Scientific Reports · doi:10.1038/s41598-019-55298-1 · Cited by 68
Two-way shape memory property and its structural origin of cross-linked poly(ε-caprolactone)
Huang, M., Dong, X., Wang, L., Zhao, J., Liu, G., & Wang, D. (2014) · RSC Adv. · doi:10.1039/c4ra09385b · Cited by 67
Temperature memory effect in amorphous shape memory polymers
Yu, K., & Qi, H. J. (2014) · Soft Matter · doi:10.1039/c4sm01816h · Cited by 65
Two-way bending properties of shape memory composite with SMA and SMP
Tobushi, H., Hayashi, S., Sugimoto, Y., & Date, K. (2009) · Materials · doi:10.3390/ma2031180 · Cited by 63
Geiss, M. J., Boddeti, N., Weeger, O., Maute, K. K., & Dunn, M. L. (2018) · Journal of Mechanical Design · doi:10.1115/1.4041945 · Cited by 63
Wang, L., Nurzaman, S. G., & Iida, F. (2017) · doi:10.1561/9781680832655 · Cited by 62
Advancing reversible shape memory by tuning the polymer network architecture
Li, Q., Zhou, J., Vatankhah-Varnoosfaderani, M., Nykypanchuk, D., Gang, O., & Sheiko, S. S. (2016) · Macromolecules · doi:10.1021/acs.macromol.5b02740 · Cited by 61
Dolynchuk, O., Kolesov, I., Jehnichen, D., Reuter, U., Radusch, H.-J., & Sommer, J.-U. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b00481 · Cited by 61
Shape-memory behavior of cross-linked semi-crystalline polymers and their blends
Kolesov, I., Dolynchuk, O., & Radusch, H.-J. (2015) · Express Polymer Letters · doi:10.3144/expresspolymlett.2015.24 · Cited by 60
Xie, H., Cheng, C.-Y., Du, L., Fan, C.-J., Deng, X.-Y., Yang, K.-K., & Wang, Y.-Z. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00382 · Cited by 60
Reversible actuation in main-chain liquid crystalline elastomers with varying crosslink densities
Burke, K. A., Rousseau, I. A., & Mather, P. T. (2014) · Polymer · doi:10.1016/j.polymer.2014.06.088 · Cited by 60
Shape forming by thermal expansion mismatch and shape memory locking in polymer/elastomer laminates
Yuan, C., Ding, Z., Wang, T. J., Dunn, M. L., & Qi, H. J. (2017) · Smart Materials and Structures · doi:10.1088/1361-665x/aa8241 · Cited by 60
Two-way actuation behavior of shape memory polymer/elastomer core/shell composites
Kang, T.-H., Lee, J.-M., Yu, W.-R., Youk, J. H., & Ryu, H. W. (2012) · Smart Materials and Structures · doi:10.1088/0964-1726/21/3/035028 · Cited by 56
Chen, S., Mo, F., Stadler, F. J., Chen, S., Ge, Z., & Zhuo, H. (2015) · Journal of Materials Chemistry B · doi:10.1039/c5tb01075f · Cited by 56
Thermo-responsive two-way shape changeable polymeric laminate
Tamagawa, H. (2010) · Materials Letters · doi:10.1016/j.matlet.2009.12.053 · Cited by 56
Jin, L., Zeng, Z., & Huo, Y. (2010) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2010.07.019 · Cited by 56
Shape memory response and hierarchical motion capabilities of 4D printed auxetic structures
Pandini, S., Inverardi, N., Scalet, G., Battini, D., Bignotti, F., Marconi, S., & Auricchio, F. (2019) · Mechanics Research Communications · doi:10.1016/j.mechrescom.2019.103463 · Cited by 56
Self-citationDynamic Optical Gratings Accessed by Reversible Shape Memory
Tippets, C. A., Li, Q., Fu, Y., Donev, E. U., Zhou, J., Turner, S. A., Jackson, A.-M. S., Ashby, V. S., Sheiko, S. S., & Lopez, R. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b02688 · Cited by 55
Biocompound-based multiple shape memory polymers reinforced by photo-cross-linking
Wang, K., Jia, Y.-G., & Zhu, X. X. (2015) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.5b00226 · Cited by 54
Use of intermolecular hydrogen bonding to synthesize triple-shape memory supermolecular composites
Chen, H., Liu, Y., Gong, T., Wang, L., Zhao, K., & Zhou, S. (2013) · RSC Advances · doi:10.1039/c3ra00091e · Cited by 53
‘Two way’ shape memory composites based on electroactive polymer and thermoplastic membrane
Yao, Y., Zhou, T., Wang, J., Li, Z., Lu, H., Liu, Y., & Leng, J. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.08.019 · Cited by 53
Wang, L., Liu, W., Guo, L.-X., Lin, B.-P., Zhang, X.-Q., Sun, Y., & Yang, H. (2017) · Polymer Chemistry · doi:10.1039/c6py02096h · Cited by 53
Xue, R., Li, R., Du, Z., Zhang, W., Zhu, Y., Sun, Z. G., & Guo, X. (2017) · Extreme Mechanics Letters · doi:10.1016/j.eml.2017.03.004 · Cited by 53
Modeling the multiple shape memory effect and temperature memory effect in amorphous polymers
Xiao, R., Guo, J., & Nguyen, T. D. (2015) · RSC Advances · doi:10.1039/c4ra11412d · Cited by 52
Inhomogeneous stretch induced patterning of molecular orientation in liquid crystal elastomers
Ahn, C., Liang, X., & Cai, S. (2015) · Extreme Mechanics Letters · doi:10.1016/j.eml.2015.09.007 · Cited by 52
Ge, F., & Zhao, Y. (2017) · Chemical Science · doi:10.1039/c7sc01792h · Cited by 52
Xiao, L., Wei, M., Zhan, M., Zhang, J., Xie, H., Deng, X., Yang, K., & Wang, Y. (2014) · Polymer Chemistry · doi:10.1039/c3py01476b · Cited by 51
Programmable soft robotics based on nano-textured thermo-responsive actuators
Kang, D. J., An, S., Yarin, A. L., & Anand, S. (2019) · Nanoscale · doi:10.1039/c8nr08215d · Cited by 51
Sachyani Keneth, E., Scalet, G., Layani, M., Tibi, G., Degani, A., Auricchio, F., & Magdassi, S. (2020) · Soft Robotics · doi:10.1089/soro.2018.0159 · Cited by 51
Self-citationA hydrogel‐forming liquid crystalline elastomer exhibiting soft shape memory
Torbati, A. H., & Mather, P. T. (2016) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.23892 · Cited by 47
Fan, L. F., Rong, M. Z., Zhang, M. Q., & Chen, X. D. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201700124 · Cited by 47
Belmonte, A., Fernández-Francos, X., Serra, À., & De la Flor, S. (2017) · Materials & Design · doi:10.1016/j.matdes.2016.10.009 · Cited by 46
Taya, M., Liang, Y., Namli, O. C., Tamagawa, H., & Howie, T. (2013) · Smart Materials and Structures · doi:10.1088/0964-1726/22/10/105003 · Cited by 45
Li, G., King, A., Xu, T., & Huang, X. (2013) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000572 · Cited by 44
Niu, Y., Zhang, P., Zhang, J., Xiao, L., Yang, K., & Wang, Y. (2012) · Polymer Chemistry · doi:10.1039/c2py20311a · Cited by 44
Zhou, J., Cao, H., Chang, R., Shan, G., Bao, Y., & Pan, P. (2018) · ACS Macro Letters · doi:10.1021/acsmacrolett.7b00995 · Cited by 44
Kolesov, I., Dolynchuk, O., Jehnichen, D., Reuter, U., Stamm, M., & Radusch, H.-J. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00097 · Cited by 43
Chen, S., Yuan, H., Chen, S., Yang, H., Ge, Z., Zhuo, H., & Liu, J. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta01617c · Cited by 42 · cited 1×
“It is worth highlighting that multi-step programming is not a prerequisite for achieving the multiple-way SME and one-step programming has been also applied (see [38,73,74] and references therein).”
BackgroundShape memory behavior of liquid-crystalline elastomer/graphene oxide nanocomposites
Marotta, A., Lama, G. C., Ambrogi, V., Cerruti, P., Giamberini, M., & Gentile, G. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.03.002 · Cited by 40
Dolynchuk, O., Kolesov, I., Androsch, R., & Radusch, H.-J. (2015) · Polymer · doi:10.1016/j.polymer.2015.10.017 · Cited by 39
Wen, Z., Zhang, T., Hui, Y., Wang, W., Yang, K., Zhou, Q., & Wang, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta02537k · Cited by 39
Designing temperature-memory effects in semicrystalline polyurethane
Mirtschin, N., & Pretsch, T. (2015) · RSC Advances · doi:10.1039/c5ra05492c · Cited by 39 · cited 1×
“[96] studied how programming parameters such as the strain rate and temperature holding time at the deformation temperature allow one to gain precise control of the TME in semi-crystalline polyurethanes and to design the TME under stress-free recovery conditions.”
BackgroundSequential Motion of 4D Printed Photopolymers with Broad Glass Transition
Inverardi, N., Pandini, S., Bignotti, F., Scalet, G., Marconi, S., & Auricchio, F. (2020) · Macromolecular Materials and Engineering · doi:10.1002/mame.201900370 · Cited by 39
Self-citationAdvances in Shape Memory Materials
Pieczyska, E. A., Takeda, K., Matsui, R., et al. (2017) · Advanced structured materials · doi:10.1007/978-3-319-53306-3 · Cited by 39
A Systematic Overview of Soft Actuators for Robotics
Boyraz, P., Runge, G., & Raatz, A. (2018) · doi:10.20944/preprints201806.0172.v1 · Cited by 39
Scalet, G., Pandini, S., Messori, M., Toselli, M., & Auricchio, F. (2018) · Polymer · doi:10.1016/j.polymer.2018.10.027 · Cited by 38 · cited 8×
“Particularly, the two-way SME was shown to be tailored by the applied stress, the cooling/heating rate, and the crosslink density, leading to materials capable of two-way reversible strain variations between 10% and 100% under the application of moderate stresses (typically, between hundreds of kPa and a few MPa) [103…”
BackgroundInfluentialSelf-citationChen, S., Yuan, H., Ge, Z., Chen, S., Zhuo, H., & Liu, J. (2014) · J. Mater. Chem. C · doi:10.1039/c3tc31612b · Cited by 37
Active Origami: Modeling, Design, and Applications
Hernandez, E. A. P., Hartl, D. J., & Lagoudas, D. C. (2018) · Cited by 36
Li, H., Gao, X. Y., & Luo, Y. (2016) · Soft Matter · doi:10.1039/c6sm00185h · Cited by 35
Dolynchuk, O., Kolesov, I., & Radusch, H. (2014) · Polymers for Advanced Technologies · doi:10.1002/pat.3335 · Cited by 34
Fang, L., Fang, T., Liu, X., Chen, S., Lu, C., & Xu, Z. (2016) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600139 · Cited by 34
Han, J., Lai, S., & Chiu, Y. T. (2018) · Polymers for Advanced Technologies · doi:10.1002/pat.4309 · Cited by 34
Controlled Actuation of a Carbon Nanotube/Epoxy Shape-Memory Liquid Crystalline Elastomer
Lama, G. C., Cerruti, P., Lavorgna, M., Carfagna, C., Ambrogi, V., & Gentile, G. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.6b06550 · Cited by 33
Li, J., Liu, T., Pan, Y., Xia, S., Zheng, Z., Ding, X., & Peng, Y. (2012) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201200231 · Cited by 32
In situ temperature tunable pores of shape memory polyurethane membranes
Ahn, J.-S., Yu, W.-R., Youk, J. H., & Ryu, H. Y. (2011) · Smart Materials and Structures · doi:10.1088/0964-1726/20/10/105024 · Cited by 32
Thermally driven microfluidic pumping via reversible shape memory polymers
Robertson, J. M., Rodriguez, R., Holmes, L. R., Mather, P. T., & Wetzel, E. D. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/8/085043 · Cited by 32
Pieczyska, E. A., Staszczak, M., Maj, M., Kowalczyk-Gajewska, K., Golasiński, K. M., Cristea, M., TOBUSHI, H., & Hayashi, S. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/8/085002 · Cited by 32
Stimuli-induced bi-directional hydrogel unimorph actuators
Liu, S., Boatti, E., Bertoldi, K., & Kramer-Bottiglio, R. K. (2018) · Extreme Mechanics Letters · doi:10.1016/j.eml.2018.03.001 · Cited by 31 · cited 1×
“, multilayer systems) [19,20], architected materials (e.”
Svetozarevic, B., Nagy, Z., Hofer, J., Jacob, D., Begle, M., Chatzi, E., & Schlueter, A. (2016) · Proceedings - IEEE International Conference on Robotics and Automation/Proceedings · doi:10.1109/icra.2016.7487700 · Cited by 30 · cited 1×
“, automotive [3], aerospace [4,5], wearable [6], medical [7–11], and renewable energy [12] sectors.”
BackgroundFlexible Material Based on Poly(lactic acid) and Liquid Crystal with Multishape Memory Effects
Li, M., Song, F., Chen, L., Wang, X., & Wang, Y. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00582 · Cited by 29 · cited 6×
“The two programming steps are similar to those described for the one-way SMP in Section 2.1 and consist of: (i) heating the material up to a temperature T1 > Ttrans,1 > Ttrans,2; (ii) deforming the material; (iii) cooling the material down to Ttrans,2 < T2 < Ttrans,1; (iv) removing the applied load; (v) deforming the…”
BackgroundInfluentialYan, W., Rudolph, T., Noechel, U., Gould, O., Behl, M., Kratz, K., & Lendlein, A. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b00322 · Cited by 29
Chen, S., Yuan, H., Zhuo, H., Chen, S., Yang, H., Ge, Z., & Liu, J. (2014) · J. Mater. Chem. C · doi:10.1039/c4tc00137k · Cited by 28
Zhang, Q., Wei, H., Liu, Y., Leng, J., & Du, S. (2016) · RSC Advances · doi:10.1039/c5ra24247a · Cited by 28
A facile and general approach to recoverable high-strain multishape shape memory polymers
Li, X., Pan, Y., Zheng, Z., & Ding, X. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700613 · Cited by 28 · cited 1×
“, physically-crosslinked thermoplastic polymers) may exhibit lower shape fixity and shape recovery ratios, due to long-range molecular chain slippage and damage of physical crosslinks integrity, especially under high strain [92].”
BackgroundBelmonte, A., Lama, G. C., Gentile, G., Fernández-Francos, X., De la Flor, S., Cerruti, P., & Ambrogi, V. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b04610 · Cited by 28
An actuator of two-way behavior by using two kinds of shape memory polymers with different Tgs
Imai, S., & Sakurai, K. (2013) · Precision Engineering · doi:10.1016/j.precisioneng.2013.01.002 · Cited by 27
Noncontinuously Responding Polymeric Actuators
Farhan, M., Rudolph, T., Nöchel, U., Yan, W., Kratz, K., & Lendlein, A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11316 · Cited by 27
A new approach to modeling liquid crystal elastomers using phase field methods
Oates, W. S., & Wang, H. (2009) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/17/6/064004 · Cited by 25
Molavi, F. K., Ghasemi, I., Messori, M., & Esfandeh, M. (2019) · Journal of Polymers and the Environment · doi:10.1007/s10924-019-01366-6 · Cited by 24
Qi, X., Guo, Y., Yuan, W., Dong, P. W., & Fu, Q. (2016) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.6b08536 · Cited by 23 · cited 1×
“Some approaches use SMP-based composites or fillers to tune polymer behavior [82,97].”
MethodA simple analytical thermo-mechanical model for liquid crystal elastomer bilayer structures
Cui, Y. T., Wang, C., Sim, K., Chen, J., Li, Y., Xing, Y., Yu, C., & Song, J. (2018) · AIP Advances · doi:10.1063/1.5013205 · Cited by 23
Untethered Soft Actuators by Liquid–Vapor Phase Transition: Remote and Programmable Actuation
Han, J., Jiang, W., Niu, D., Li, Y., Zhang, Y., Lei, B., Liu, H., Shi, Y., Chen, B., Yin, L., et al. (2019) · Advanced Intelligent Systems · doi:10.1002/aisy.201970080 · Cited by 23
Harnessing bistability for directional propulsion of untethered, soft robots
Chen, T., Bilal, O., Shea, K., & Daraio, C. (2017) · arXiv.org · doi:10.48550/arxiv.1710.04723 · Cited by 23
Wang, Y., Huang, X., Zhang, J., Meng, B., Zhang, J., Niu, H., Li, C., Yu, H., Wang, B., & Jiang, H. (2017) · Molecular Crystals and Liquid Crystals · doi:10.1080/15421406.2017.1318025 · Cited by 22
Optically and thermally activated shape memory supramolecular liquid crystalline polymers
Fu, S., Zhang, H., & Zhao, Y. (2016) · Journal of Materials Chemistry C · doi:10.1039/c6tc00718j · Cited by 21
Motion control in free-standing shape-memory actuators
Belmonte, A., Lama, G. C., Cerruti, P., Ambrogi, V., Fernández‐Francos, X., & la Flor, S. D. (2018) · Smart Materials and Structures · doi:10.1088/1361-665x/aac278 · Cited by 21
Pieczyska, E. A., Staszczak, M., Kowalczyk-Gajewska, K., Maj, M., Golasiński, K. M., Golba, S., TOBUSHI, H., & Hayashi, S. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.04.014 · Cited by 20
Multiple shape memory polymers for self-deployable device
Zhuo, S., Zhang, G., Feng, X., Jiang, H., Shi, J., Liu, H., & Li, H. (2016) · RSC Advances · doi:10.1039/c6ra06168k · Cited by 18
Xu, M., Cong, Y., & Zhang, B. (2017) · Liquid Crystals · doi:10.1080/02678292.2017.1308022 · Cited by 17
Noncontinuously Responding Polymeric Actuators
Rudolph, T., Farhan, M., Noechel, U., et al. (2018) · Cited by 17
Isothermal programming of triple shape memory
Zhou, J. C., Li, Q., Turner, S. A., Ashby, V. S., & Sheiko, S. S. (2015) · Polymer · doi:10.1016/j.polymer.2015.02.023 · Cited by 15 · cited 1×
“[75] proposed an approach consisting of programming different shapes at different stages of an isothermal crystallization process and in heating the SMP to recover the permanent shape sequentially.”
Design of Soft Origami Mechanisms with Targeted Symmetries
Gillman, A. S., Wilson, G., Fuchi, K., Hartl, D. J., Pankonien, A. M., & Buskohl, P. R. (2018) · Actuators · doi:10.3390/act8010003 · Cited by 14 · cited 1×
“, origami, kirigami) [22,23], bio-inspired and bio-mimetics architectures [19,24,25], reinforced systems [26], and granular jamming [27].”
BackgroundClifford, D. T., Zupan, R. J., Brigham, J. C., et al. (2017) · Durham Research Online (Durham University) · Cited by 13
Kotikian, A., Truby, R. L., Boley, J. W., White, T. J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201870063 · Cited by 13
Gladman, A. S., Matsumoto, E. A., Mahadevan, L., et al. (2017) · The MIT Press eBooks · doi:10.7551/mitpress/11236.003.0018 · Cited by 11
Mo, F., Ban, J., Pan, L., Shi, B., & Lu, S. (2019) · New Journal of Chemistry · doi:10.1039/c8nj05451g · Cited by 10
Thermomechanical Behavior and Modeling Approaches
Qi, H. J., & Dunn, M. L. (2010) · doi:10.1201/9781420090208-7 · Cited by 8
Semi-Autonomous Locomotion for Diagnostic Endoscopy Device1
Dehghani, H., Pourghodrat, A., Terry, B. S., et al. (2015) · Journal of Medical Devices · doi:10.1115/1.4030562 · Cited by 7
Porous Polyurethane Shape Memory Polymers
Huang, W. M., Yang, B., & Fu, Y. (2011) · CRC Press eBooks · doi:10.1201/b11209-9 · Cited by 3
Thermomechanical Behavior and Modeling Approaches
Qi, H. J., & Dunn, M. L. (2010) · CRC Press eBooks · doi:10.1201/9781420090208-c3 · Cited by 2
Research works printed but not linked: 2
- Ueda, J., and Kurita, Y. (2017). Chapter Six - Soft Wearable Robotics Technologies for Body Motion Sensing. Human Modelling for Bio-Inspired Robotics, Academic Press.
- Hayashi, 1993, Properties and Applications of Polyurethane-series Shape Memory Polymer, Int. Prog. Urethanes, 6, 90
Cited by
Micro/nano functional devices fabricated by additive manufacturing
Huang, Z., Shao, G., & Li, L. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101020 · Cited by 224
3D printing of magneto-active smart materials for advanced actuators and soft robotics applications
Khalid, M. Y., Arif, Z. U., Tariq, A., Hossain, M., Ahmed Khan, K., & Umer, R. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2023.112718 · Cited by 190
Auxetic mechanical metamaterials and their futuristic developments: A state-of-art review
Balan P, M., Mertens A, J., & Bahubalendruni, M. V. A. R. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.105285 · Cited by 165
4D printing: Technological developments in robotics applications
Khalid, M. Y., Arif, Z. U., Ahmed, W., Umer, R., Zolfagharian, A., & Bodaghi, M. (2022) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2022.113670 · Cited by 160
Recent Advances in the Additive Manufacturing of Stimuli‐Responsive Soft Polymers
Tariq, A., Arif, Z. U., Khalid, M. Y., Hossain, M., Rasool, P. I., Umer, R., & Ramakrishna, S. (2023) · Advanced Engineering Materials · doi:10.1002/adem.202301074 · Cited by 157
Metadata
- Authors
- Scalet, G.
- Affiliations
- University of Pavia (IT)
- Corresponding author
- Scalet, Giulia
- ORCID
- Scalet, Giulia
- Venue
- Actuators
- Publisher
- MDPI AG
- Published
- 2020-02-15
- Volume
- 9
- Issue
- 1
- Pages
- 10
- ISSN
- 2076-0825 (ISSN-L)
- OpenAlex
- W3006401357
- Cited by
- 209
- References
- 312
- Citations by year
- 2026: 22 · 2025: 35 · 2024: 53 · 2023: 33 · 2022: 37 · 2021: 23 · 2020: 6
- FWCI
- 12.18
- Type
- journal article
- Language
- en
- Open access
- gold
- dx.doi.org
- Licence
- Locations
- Actuators (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Dielectric materials and actuators
- Keywords
- shape memory polymers, soft robotics, temperature-responsive materials, untethered soft robots, soft actuators, smart materials
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-08, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-08 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.