Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 78

The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.

Three-Dimensional (3D) Printed Microneedles for Microencapsulated Cell Extrusion

Farias, Chantell, Lyman, Roman, Hemingway, Cecilia, Chau, Huong, Mahacek, Anne, Bouzos, Evangelia, Mobed-Miremadi, Maryam·2018·Bioengineering

Abstract

Cell-hydrogel based therapies offer great promise for wound healing. The specific aim of this study was to assess the viability of human hepatocellular carcinoma (HepG2) cells immobilized in atomized alginate capsules (3.5% (w/v) alginate, d = 225 µm ± 24.5 µm) post-extrusion through a three-dimensional (3D) printed methacrylate-based custom hollow microneedle assembly (circular array of 13 conical frusta) fabricated using stereolithography. With a jetting reliability of 80%, the solvent-sterilized device with a root mean square roughness of 158 nm at the extrusion nozzle tip (d = 325 μm) was operated at a flowrate of 12 mL/min. There was no significant difference between the viability of the sheared and control samples for extrusion times of 2 h (p = 0.14, α = 0.05) and 24 h (p = 0.5, α = 0.05) post-atomization. Factoring the increase in extrusion yield from 21.2% to 56.4% attributed to hydrogel bioerosion quantifiable by a loss in resilience from 5470 (J/m3) to 3250 (J/m3), there was no significant difference in percentage relative payload (p = 0.2628, α = 0.05) when extrusion occurred 24 h (12.2 ± 4.9%) when compared to 2 h (9.9 ± 2.8%) post-atomization. Results from this paper highlight the feasibility of encapsulated cell extrusion, specifically protection from shear, through a hollow microneedle assembly reported for the first time in literature.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/bioengineering5030059

Cites

4 of 4 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 4 references

Research works printed but not linked: 131

  1. Henry, 1998, Microfabricated Microneedles: A Novel Approach to Transdermal Drug Delivery, J. Pharm. Sci., 87, 922, 10.1021/js980042+ · DOI · Paper page
  2. Wang, 2016, Enhanced Cancer Immunotherapy by Microneedle Patch-Assisted Delivery of Anti-PD1 Antibody, Nano Lett., 16, 2334, 10.1021/acs.nanolett.5b05030 · DOI · Paper page
  3. Ye, Y., Wang, C., Zhang, X., Hu, Q., Zhang, Y., Liu, Q., Wen, D., and Milligan, J. (2017). A Melanin-mediated Cancer Immunotherapy Patch. Sci. Immunol., 2. · DOI · Paper page
  4. Hu, 2017, H2O2-Responsive Vesicles Integrated with Transcutaneous Patches for Glucose-Mediated Insulin Delivery, ACS Nano, 11, 613, 10.1021/acsnano.6b06892 · DOI · Paper page
  5. Lahiji, 2018, Exendin-4-encapsulated dissolving microneedle arrays for efficient treatment of type 2 diabetes, Sci. Rep., 8, 1170, 10.1038/s41598-018-19789-x · DOI
  6. Qiu, 2015, DNA-based Vaccination Against Hepatitis B Virus Using Dissolving Microneedle Arrays Adjuvanted by Cationic Liposomes and CpG ODN, Drug Deliv., 1, 1
  7. Esser, 2016, Tetanus Vaccination with a Dissolving Microneedle Patch Confers Protective Immune Responses in Pregnancy, J. Control. Release, 236, 47, 10.1016/j.jconrel.2016.06.026 · doi:10.1016/j.jconrel.2016.06.026
  8. Ryu, 2017, Efficacy of a Bleomycin Microneedle Patch for the Treatment of Warts, Drug Deliv. Transl. Res., 8, 273, 10.1007/s13346-017-0458-4 · doi:10.1007/s13346-017-0458-4
  9. Maaden, 2018, Hollow Microneedle-mediated Micro-injections of a Liposomal HPV E7 43–63 Synthetic Long Peptide Vaccine for Efficient Induction of Cytotoxic and T-helper Responses, J. Control. Release, 269, 347, 10.1016/j.jconrel.2017.11.035 · DOI
  10. Bhatnagar, 2018, Zein Microneedles for Localized Delivery of Chemotherapeutic Agents to Treat Breast Cancer: Drug Loading, Release Behavior, and Skin Permeation Studies, AAPS PharmSciTech, 19, 1818, 10.1208/s12249-018-1004-5 · DOI
  11. Ali, 2017, DNA Vaccination for Cervical Cancer: A Novel Technology Platform of RALA Mediated Gene Delivery via Polymeric Microneedles, Nanomed. Nanotechnol. Biol. Med., 13, 921, 10.1016/j.nano.2016.11.019 · DOI
  12. Mccrudden, 2017, Transdermal Delivery of Gentamicin using Dissolving Microneedle Arrays for Potential Treatment of Neonatal Sepsis, J. Control. Release, 265, 30, 10.1016/j.jconrel.2017.07.032 · DOI · Paper page
  13. Yan, 2017, Immunotherapeutic Effect of BCG-polysaccharide Nucleic Acid Powder on Mycobacterium Tuberculosis-infected Mice using Microneedle Patches, Drug Deliv., 24, 1648, 10.1080/10717544.2017.1391892 · doi:10.1080/10717544.2017.1391892
  14. Zhang, 2017, Locally Induced Adipose Tissue Browning by Microneedle Patch for Obesity Treatment, ACS Nano, 11, 9223, 10.1021/acsnano.7b04348 · DOI · Paper page
  15. Katsumi, H., Tanaka, Y., Hitomi, K., Liu, S., Quan, Y.-S., Kamiyama, F., Sakane, T., and Yamamoto, A. (2017). Efficient Transdermal Delivery of Alendronate, a Nitrogen-Containing Bisphosphonate, Using Tip-Loaded Self-Dissolving Microneedle Arrays for the Treatment of Osteoporosis. Pharmaceutics, 9. · doi:10.3390/pharmaceutics9030029
  16. Tas, 2017, Dihydroergotamine Mesylate-loaded Dissolving Microneedle Patch Made of Polyvinylpyrrolidone for Management of Acute Migraine Therapy, J. Control. Release, 268, 159, 10.1016/j.jconrel.2017.10.021 · DOI
  17. Gurtner, 2008, Wound Repair and Regeneration, Nature, 453, 314, 10.1038/nature07039 · DOI · Paper page
  18. Park, 2014, Wound healing potential of antibacterial microneedles loaded with green tea extracts, Mater. Sci. Eng. C Mater. Biol. Appl., 42, 757, 10.1016/j.msec.2014.06.021 · doi:10.1016/j.msec.2014.06.021
  19. Kearney, 2015, Methylene blue-loaded dissolving microneedles: Potential use in photodynamic antimicrobial chemotherapy of infected wounds, Pharmaceutics, 7, 397, 10.3390/pharmaceutics7040397 · doi:10.3390/pharmaceutics7040397
  20. Saghazadeh, 2018, Drug delivery systems and materials for wound healing applications, Adv. Drug Deliv. Rev., 127, 138, 10.1016/j.addr.2018.04.008 · DOI · Paper page
  21. Takada, 2013, Usefulness of basic fibroblast growth factor (bFGF) loaded dissolving microneedles for local therapy of skin wounds, J. Biomater. Nanobiotechnol., 4, 256, 10.4236/jbnb.2013.43032 · doi:10.4236/jbnb.2013.43032
  22. Liebl, 2012, Skin Cell Proliferation Stimulated by Microneedles, J. Am. Coll. Clin. Wound Spec., 4, 2
  23. Yeo, 2017, Microneedle physical contact as a therapeutic for abnormal scars, Eur. J. Med. Res., 22, 28, 10.1186/s40001-017-0269-6 · DOI
  24. Omolu, 2017, Assessment of solid microneedle rollers to enhance transmembrane delivery of doxycycline and inhibition of MMP activity, Drug Deliv., 24, 942, 10.1080/10717544.2017.1337826 · DOI
  25. Yang, 2013, A bio-inspired swellable microneedle adhesive for mechanical interlocking with tissue, Nat. Commun., 4, 1702, 10.1038/ncomms2715 · DOI · Paper page
  26. Rajabi, M., Roxhed, N., Shafagh, R.Z., Haraldson, T., Fischer, A.C., Wijngaart, W.V.D., Stemme, G., and Niklaus, F. (2016). Flexible and Stretchable Microneedle Patches with Integrated Rigid Stainless Steel Microneedles for Transdermal Biointerfacing. PLoS ONE, 11. · DOI
  27. Mukerjee, E.V., Isseroff, R.R., Nuccitelli, R., Collins, S.D., and Smith, R.L. (September, January 30). Microneedle Array for Measuring Wound Generated Electric Fields. Proceedings of the 2006 International Conference of the IEEE Engineering in Medicine and Biology Society, New York, NY, USA. · doi:10.1109/iembs.2006.260205
  28. Norman, 2012, Hollow Microneedles for Intradermal Injection Fabricated by Sacrificial Micromolding and Selective Electrodeposition, Biomed. Microdevices, 15, 203, 10.1007/s10544-012-9717-9 · DOI
  29. Dardano, 2015, A Photolithographic Approach to Polymeric Microneedles Array Fabrication, Materials, 8, 8661, 10.3390/ma8125484 · doi:10.3390/ma8125484
  30. Choi, 2013, Nanostructured Lipid Carrier-loaded Hyaluronic Acid Microneedles for Controlled Dermal Delivery of a Lipophilic Molecule, Int. J. Nanomed., 1, 289, 10.2147/IJN.S54529 · DOI
  31. Wang, 2016, Microneedles with Controlled Bubble Sizes and Drug Distributions for Efficient Transdermal Drug Delivery, Sci. Rep., 6, 28755
  32. Kim, 2018, A Repeatable and Scalable Fabrication Method for Hollow Silicon Microneedles, J. Micromech. Microeng., 28, 035007, 10.1088/1361-6439/aaa6a8 · DOI
  33. Ceyssens, 2013, Fabrication Process for Tall, Sharp, Hollow, High Aspect Ratio Polymer Microneedles on a Platform, J. Micromech. Microeng., 23, 075023, 10.1088/0960-1317/23/7/075023 · doi:10.1088/0960-1317/23/7/075023
  34. Ruggiero, 2018, Electro-drawn Polymer Microneedle Arrays with Controlled Shape and Dimension, Sens. Actuators B Chem., 255, 1553, 10.1016/j.snb.2017.08.165 · DOI
  35. Johnson, A.R., Caudill, C.L., Tumbleston, J.R., Bloomquist, C.J., Moga, K.A., Ermoshkin, A., Shirvanyants, D., Mecham, S.J., Luft, J.C., and DeSimone, M.J. (2016). Single-Step Fabrication of Computationally Designed Microneedles by Continuous Liquid Interface Production. PLoS ONE, 11. · DOI · Paper page
  36. Huh, 2018, Effects of Two Droplet-based Dissolving Microneedle Manufacturing Methods on the Activity of Encapsulated Epidermal Growth Factor and Ascorbic Acid, Eur. J. Pharm. Sci., 114, 285, 10.1016/j.ejps.2017.12.025 · doi:10.1016/j.ejps.2017.12.025
  37. Kim, M., Yang, H., Kim, S., Lee, C., and Jung, H. (2015). The Troy Microneedle: A Rapidly Separating, Dissolving Microneedle Formed by Cyclic Contact and Drying on the Pillar (CCDP). PLoS ONE, 10. · doi:10.1371/journal.pone.0136513
  38. Luzuriaga, 2018, Biodegradable 3D Printed Polymer Microneedles for Transdermal Drug Delivery, Lab Chip, 18, 1223, 10.1039/C8LC00098K · DOI · Paper page
  39. Vinayakumar, 2016, A Hollow Stainless Steel Microneedle Array to Deliver Insulin to a Diabetic Rat, J. Micromech. Microeng., 26, 065013, 10.1088/0960-1317/26/6/065013 · DOI
  40. Mansoor, 2013, Arrays of Hollow Out-of-Plane Microneedles Made by Metal Electrodeposition onto Solvent Cast Conductive Polymer Structures, J. Micromech. Microeng., 23, 085011, 10.1088/0960-1317/23/8/085011 · DOI
  41. Ovsianikov, 2007, Two Photon Polymerization of Polymer? Ceramic Hybrid Materials for Transdermal Drug Delivery, Int. J. Appl. Ceram. Technol., 4, 22, 10.1111/j.1744-7402.2007.02115.x · DOI · Paper page
  42. Boehm, R.D., Jaipan, P., Yang, K.-H., Stewart, T.N., and Narayan, R.J. (2016). Microstereolithography-fabricated Microneedles for Fluid Sampling of Histamine-contaminated Tuna. Int. J. Bioprinting, 2. · doi:10.18063/ijb.2016.01.010
  43. Lim, 2017, Three-dimensional Printing of a Microneedle Array on Personalized Curved Surfaces for Dual-pronged Treatment of Trigger Finger, Biofabrication, 9, 015010, 10.1088/1758-5090/9/1/015010 · DOI
  44. Nordon, 2017, High Fidelity Replication of Thermoplastic Microneedles with Open Microfluidic Channels, Microsyst. Nanoeng., 3, 17034, 10.1038/micronano.2017.34 · doi:10.1038/micronano.2017.34
  45. Macdonald, 2016, Assessment of Biocompatibility of 3D Printed Photopolymers Using Zebrafish Embryo Toxicity Assays, Lab Chip, 16, 291, 10.1039/C5LC01374G · DOI · Paper page
  46. Oskui, 2015, Assessing and Reducing the Toxicity of 3D-Printed Parts, Environ. Sci. Technol. Lett., 3, 1, 10.1021/acs.estlett.5b00249 · DOI · Paper page
  47. Carve, M., and Wlodkowic, D. (2018). 3D-Printed Chips: Compatibility of Additive Manufacturing Photopolymeric Substrata with Biological Applications. Micromachines, 9. · DOI
  48. Kang, 2012, Protein Encapsulation in Polymeric Microneedles by Photolithography, Int. J. Nanomed., 1, 3143, 10.2147/IJN.S32000 · doi:10.2147/ijn.s32000
  49. Lu, 2015, Microstereolithography and Characterization of Poly(propylene fumarate)-based Drug-loaded Microneedle Arrays, Biofabrication, 7, 045001, 10.1088/1758-5090/7/4/045001 · DOI
  50. Gieseke, M., Senz, V., Vehse, M., Fiedler, S., Irsig, R., Hustedt, M., Sternberg, K., Nölke, C., Kaierle, S., and Wesling, V. (2012). Additive Manufacturing of Drug Delivery Systems. Biomed. Eng. Biomed. Tech., 57. · doi:10.1515/bmt-2012-4109
  51. Miller, 2011, Integrated Carbon Fiber Electrodes within Hollow Polymer Microneedles for Transdermal Electrochemical Sensing, Biomicrofluidics, 5, 013415, 10.1063/1.3569945 · DOI
  52. Lacan, F., Coulman, S.A., Hotston, A., Petkov, P., and Birchall, J.C. (2013, January 8–10). Prototyping Parts with Micro Scale Features Using Additive Manufacturing: Using Microneedles as a Case Study. Proceedings of the 10th International Conference on Multi-Material Micro Manufacture, San Sebastián, Spain. · doi:10.3850/978-981-07-7247-5-346
  53. Pere, 2018, 3D Printed Microneedles for Insulin Skin Delivery, Int. J. Pharm., 544, 425, 10.1016/j.ijpharm.2018.03.031 · DOI · Paper page
  54. Liu, T.-L., Zahedi, S., Garling, R.J., Kralickk, F., Harris, C.A., and Cheng, M.M.-C. (2017, January 22–26). Prosthetic Arachnoid Granulations using 3D Printing Technology. Proceedings of the IEEE 30th International Conference on Micro Electro Mechanical Systems (MEMS), Las Vegas, NV, USA. · doi:10.1109/memsys.2017.7863463
  55. Nagamine, 2017, An Array of Porous Microneedles for Transdermal Monitoring of Intercellular Swelling, Biomed. Microdevices, 19, 68, 10.1007/s10544-017-0207-y · doi:10.1007/s10544-017-0207-y
  56. Lee, 2018, A Three-dimensional and Bevel-angled Ultra high Aspect Ratio Microneedle for Minimally Invasive and Painless Blood Sampling, Sens. Actuators B Chem., 255, 384, 10.1016/j.snb.2017.08.030 · DOI
  57. Wang, 2011, Hypodermic Needle-like Hollow Polymer Microneedle Array using UV Lithography into Micromolds, J. Microelectromech. Syst., 23, 991, 10.1109/JMEMS.2014.2307320 · DOI
  58. Lau, 2017, Multilayered Pyramidal Dissolving Microneedle Patches with Flexible Pedestals for Improving Effective Drug Delivery, J. Control. Release, 265, 113, 10.1016/j.jconrel.2016.08.031 · doi:10.1016/j.jconrel.2016.08.031
  59. Nguyen, 2015, Enhanced Skin Delivery of Vismodegib by Microneedle Treatment, Drug Deliv. Transl. Res., 5, 407, 10.1007/s13346-015-0241-3 · doi:10.1007/s13346-015-0241-3
  60. Gupta, 2011, Infusion Pressure and Pain During Microneedle Injection into Skin of Human Subjects, Biomaterials, 32, 6823, 10.1016/j.biomaterials.2011.05.061 · DOI
  61. Gill, 2008, Effect of Microneedle Design on Pain in Human Volunteers, Clin. J. Pain, 24, 585, 10.1097/AJP.0b013e31816778f9 · DOI · Paper page
  62. Gupta, 2011, Kinetics of Skin Resealing after Insertion of Microneedles in Human Subjects, J. Control. Release, 154, 148, 10.1016/j.jconrel.2011.05.021 · DOI · Paper page
  63. Sasaki, 2008, Mesenchymal Stem Cells Are Recruited into Wounded Skin and Contribute to Wound Repair by Transdifferentiation into Multiple Skin Cell Type, J. Immunol., 180, 2581, 10.4049/jimmunol.180.4.2581 · DOI · Paper page
  64. Maharlooei, 2011, Adipose Tissue Derived Mesenchymal Stem Cell (AD-MSC) Promotes Skin Wound Healing in Diabetic Rats, Diabetes Res. Clin. Pract., 93, 228, 10.1016/j.diabres.2011.04.018 · DOI · Paper page
  65. Maxson, 2012, Concise Review: Role of Mesenchymal Stem Cells in Wound Repair, STEM Cells Transl. Med., 1, 142, 10.5966/sctm.2011-0018 · DOI · Paper page
  66. Nuschke, 2013, Activity of Mesenchymal Stem Cells in Therapies for Chronic Skin Wound Healing, Organogenesis, 10, 29, 10.4161/org.27405 · DOI · Paper page
  67. Shareef, 2015, Role of Whole Bone Marrow, Whole Bone Marrow Cultured Cells, and Mesenchymal Stem Cells in Chronic Wound Healing, Stem Cell Res. Ther., 6, 24, 10.1186/s13287-015-0001-9 · DOI
  68. Motegi, 2017, Mesenchymal Stem Cells: The Roles and Functions in Cutaneous Wound Healing and Tumor Growth, J. Dermatol. Sci., 86, 83, 10.1016/j.jdermsci.2016.11.005 · DOI
  69. Bryant, 2017, Programmable Hydrogels for Cell Encapsulation and Neo-Tissue Growth to Enable Personalized Tissue Engineering, Adv. Healthc. Mater., 7, 1700605, 10.1002/adhm.201700605 · DOI
  70. Duscher, 2015, Stem Cells in Wound Healing: The Future of Regenerative Medicine? A Mini-Review, Gerontology, 62, 216, 10.1159/000381877 · DOI · Paper page
  71. Rosemann, 2014, Why Regenerative Stem Cell Medicine Progresses Slower Than Expected, J. Cell. Biochem., 115, 2073, 10.1002/jcb.24894 · DOI
  72. Kirby, 2015, Stem Cells for Cutaneous Wound Healing, BioMed Res. Int., 2015, 285869, 10.1155/2015/285869 · DOI
  73. Cerqueira, 2016, Stem Cells in Skin Wound Healing: Are We There Yet?, Adv. Wound Care, 5, 64, 10.1089/wound.2014.0607 · DOI
  74. Dash, B., Xu, Z., Lin, L., Koo, A., Ndon, S., Berthiaume, F., Dardik, A., and Hsia, H. (2018). Stem Cells and Engineered Scaffolds for Regenerative Wound Healing. Bioengineering, 5. · DOI
  75. Dickinson, 2016, Engineered Biopolymeric Scaffolds for Chronic Wound Healing, Front. Physiol., 7, 1, 10.3389/fphys.2016.00341 · DOI · Paper page
  76. Bakhshayesh, 2017, Recent Advances on Biomedical Applications of Scaffolds in Wound Healing and Dermal Tissue Engineering, Artif. Cells Nanomed. Biotechnol., 46, 691, 10.1080/21691401.2017.1349778 · DOI · Paper page
  77. Han, 2016, Microribbon-based Hydrogels Accelerate Stem Cell-based Bone Regeneration in a Mouse Critical-size Cranial, J. Biomed. Mater. Res. Part A, 104, 1321, 10.1002/jbm.a.35715 · DOI
  78. Wong, 1986, Bioartificial Liver: Implanted Artificial Cells Microencapsulated Living Hepatocytes Increases Survival of Liver Failure Rats, Int. J. Artif. Organs, 9, 335, 10.1177/039139888600900515 · DOI
  79. Wright, B., Hopkinson, A., Leyland, M., and Connon, C.J. (2013). The Secretome of Alginate-Encapsulated Limbal Epithelial Stem Cells Modulates Corneal Epithelial Cell Proliferation. PLoS ONE, 8. · doi:10.1371/journal.pone.0070860
  80. Schmitt, A., Rödel, P., Anamur, C., Seeliger, C., Imhoff, A.B., Herbst, E., Vogt, S., van Griensven, M., Winter, G., and Engert, J. (2015). Calcium Alginate Gels as Stem Cell Matrix—Making Paracrine Stem Cell Activity Available for Enhanced Healing after Surgery. PLoS ONE, 10. · DOI
  81. Bussche, 2015, Microencapsulated Equine Mesenchymal Stromal Cells Promote Cutaneous Wound Healing in Vitro, Stem Cell Res. Ther., 6, 1, 10.1186/s13287-015-0037-x · DOI
  82. Cooke, 2017, Geometric Confinement is Required for Recovery and Maintenance of Chondrocyte Phenotype in Alginate, APL Bioeng., 1, 016104, 10.1063/1.5006752 · DOI
  83. Gualeni, 2018, Minimally invasive and targeted therapeutic cell delivery to the skin using microneedle devices, Br. J. Dermatol., 178, 731, 10.1111/bjd.15923 · DOI
  84. Boniface, 2018, Cell Delivery Using Microneedle Devices: A New Approach to Treat Depigmenting Disorders, Br. J. Dermatol., 178, 583, 10.1111/bjd.16159 · doi:10.1111/bjd.16159
  85. Mitteregger, 1999, Rotary Cell Culture System (RCCS): A New Method for Cultivating Hepatocytes on Microcarriers, Int. J. Artif. Organs, 22, 816, 10.1177/039139889902201207 · DOI
  86. Baudoin, 2011, Behavior of HepG2/C3A Cell Cultures in a Microfluidic Bioreactor, Biochem. Eng. J., 53, 172, 10.1016/j.bej.2010.10.007 · DOI
  87. Deng, 2014, Enhanced Liver Functions of HepG2 Cells in the Alginate/Xyloglucan Scaffold, Biotechnol. Lett., 37, 235, 10.1007/s10529-014-1663-6 · doi:10.1007/s10529-014-1663-6
  88. Ratner, B.D., Hoffman, A.S., Schoen, F.J., and Lemons, J.E. (2013). Biomaterials Science, An Introduction to Materials in Medicine, Elsevier. [3rd ed.]. Chapter 1.2.6.
  89. Asi, 2012, Comparative Diffusivity Measurements for Alginate-based Atomized and Inkjet-Bioprinted Artificial Cells using Fluorescence Microscopy, Artif. Cells Nanomed. Biotechnol., 41, 196
  90. Wang, 1996, Influence of Process Parameters on Stereolithography Part Shrinkage, Mater. Des., 17, 205, 10.1016/S0261-3069(97)00008-3 · DOI
  91. Huang, 2014, Optimal Offline Compensation of Shape Shrinkage for Three-dimensional Printing Processes, IIE Trans., 47, 431, 10.1080/0740817X.2014.955599 · DOI · Paper page
  92. Karalekas, 2003, Study of Shrinkage Strains in a Stereolithography Cured Acrylic Photopolymer Resin, J. Mater. Process. Technol., 136, 146, 10.1016/S0924-0136(03)00028-1 · DOI
  93. Wallace, 2014, Validating Continuous Digital Light Processing (cDLP) Additive Manufacturing Accuracy and Tissue Engineering Utility of a Dye-initiator Package, Biofabrication, 6, 015003, 10.1088/1758-5082/6/1/015003 · DOI
  94. Karrer, 1992, Shrinkage Effects in Photopolymerizable Resins Containing Filling Agents: Application to Stereophotolithography, J. Polym. Sci. Part A Polym. Chem., 30, 2715, 10.1002/pola.1992.080301307 · doi:10.1002/pola.1992.080301307
  95. Vitale, A., and Cabral, J. (2016). Frontal Conversion and Uniformity in 3D Printing by Photopolymerisation. Materials, 9. · DOI
  96. Huang, 2017, Preparation of a Novel Hybrid Type Photosensitive Resin for Stereolithography in 3D Printing and Testing on the Accuracy of the Fabricated Parts, J. Wuhan Univ. Technol. Mater. Sci. Ed., 32, 726, 10.1007/s11595-017-1659-x · doi:10.1007/s11595-017-1659-x
  97. Harrison, R.G., Todd, P.W., Rudge, S.R., and Petrides, D. (2002). Bioseparations Science and Engineering, Oxford University Press. [1st ed.].
  98. Prakash, S. (2007). Artificial Cells, Cell Engineering and Therapy, Woodhead Publishing. · doi:10.1533/9781845693077
  99. Chang, T.M.S. (2013). High-Throughput Methods for Miniaturization of Implantable Artificial Cells. Selected Topics in Nanomedicine, World Scientific Publishing. · doi:10.1142/8776
  100. Seaton, 2015, Porcine Models of Cutaneous Wound Healing, ILAR J., 56, 127, 10.1093/ilar/ilv016 · DOI · Paper page
  101. Ligon, 2017, Polymers for 3D Printing and Customized Additive Manufacturing, Chem. Rev., 117, 10212, 10.1021/acs.chemrev.7b00074 · DOI · Paper page
  102. Tappa, K., and Jammalamadaka, U. (2018). Novel Biomaterials Used in Medical 3D Printing Techniques. J. Funct. Biomater., 9. · DOI · Paper page
  103. Kundu, A., Ausaf, T., and Rajaraman, S. (2018). 3D Printing, Ink Casting and Micromachined Lamination (3D PICLμM): A Makerspace Approach to the Fabrication of Biological Microdevices. Micromachines, 9. · DOI
  104. Jager, 2003, Comprehensive biocompatibility testing of a new PMMA-hA bone cement versus conventional PMMA cement in vitro, Biomater. Sci. Polym. Ed., 14, 1283, 10.1163/156856203322553491 · doi:10.1163/156856203322553491
  105. Frazer, 2005, PMMA: An essential material in medicine and dentistry, J. Long-Term Eff. Med. Implants, 15, 629, 10.1615/JLongTermEffMedImplants.v15.i6.60 · DOI · Paper page
  106. Cheng, 2016, Michael Addition Polymerization of Trifunctional Amine and Acrylic Monomer: A Versatile Platform for Development of Biomaterials, Biomacromolecules, 17, 3115, 10.1021/acs.biomac.6b01043 · DOI
  107. Herrick, D., and Klein, R. (2016, January 13–16). Emerging Health and Safety Issues in Makerspaces. Proceedings of the 1st International Symposium on Academic Makerspaces, Cambridge, MA, USA.
  108. Azimi, 2016, Emissions of Ultrafine Particles and Volatile Organic Compounds from Commercially Available Desktop Three-Dimensional Printers with Multiple Filaments, Environ. Sci. Technol., 50, 1260, 10.1021/acs.est.5b04983 · DOI · Paper page
  109. Linan, L.Z., Lima, N.M.N., Benatti, C., Xavier, M., Rodrigues, A.A., Manenti, F., Jardini, A., Filho, R.M., and Gilioli, R. (2018). Cytotoxicity Assessment of a Poly(methyl methacrylate) Synthesized for the Direct Fabrication of Bone Tissues. Braz. Arch. Biol. Technol., 61. · doi:10.1590/1678-4324-2018160526
  110. Simpliciano, 2013, Cross-Linked Alginate Film Pore Size Determination Using Atomic Force Microscopy and Validation Using Diffusivity Determinations, J. Surf. Eng. Mater. Adv. Technol., 3, 1
  111. Baier, 2006, Surface behavior of biomaterials: The theta surface for biocompatibility, J. Mater. Sci. Mater. Med., 17, 1057, 10.1007/s10856-006-0444-8 · DOI · Paper page
  112. Buergers, 2007, Bacterial adhesion of Streptococcus mutans to provisional fixed prosthodontic material, J. Prosthet. Dent., 98, 461, 10.1016/S0022-3913(07)60146-2 · DOI
  113. He, Q., Chen, H., Huang, L., Dong, J., Guo, D., Mao, M., and Lei, W. (2012). Porous Surface Modified Bioactive Bone Cement for Enhanced Bone Bonding. PLoS ONE, 7. · doi:10.1371/journal.pone.0042525
  114. Maluta, 2014, The Biocompatibility of Porous vs Non-Porous Bone Cements: A New Methodological Approach, Eur. J. Histochem., 58, 2255
  115. Xie, 2007, Electrospray in the dripping mode for cell microencapsulation, J. Colloid Interface Sci., 312, 247, 10.1016/j.jcis.2007.04.023 · DOI
  116. Bassett, 2016, Versatile, cell and chip friendly method to gel alginate in microfluidic devices, Lab Chip, 16, 3718, 10.1039/C6LC00769D · DOI
  117. Yang, 2016, Single mammalian cell encapsulation by in situ polymerization, J. Mater. Chem. B, 47, 7662, 10.1039/C6TB02491B · DOI
  118. Jing, 2010, Cardiac Cell Generation from Encapsulated Embryonic Stem Cells in Static and Scalable Culture Systems, Cell Transplant., 19, 1397, 10.3727/096368910X513955 · DOI
  119. Zhang, W., and He, X. (2009). Encapsulation of Living Cells in Small (~100 μm) Alginate Microcapsules by Electrostatic Spraying: A Parametric Study. ASME. J. Biomech. Eng., 131. · DOI
  120. Wilson, 2014, Alginate Encapsulation Parameters Influence the Differentiation of Microencapsulated Embryonic Stem Cell Aggregates, Biotechnol. Bioeng., 111, 618, 10.1002/bit.25121 · DOI
  121. Gryshkov, O., Pogozhykh, D., Hofmann, N., Pogozhykh, O., Mueller, T., and Glasmacher, B. (2014). Encapsulating Non-Human Primate Multipotent Stromal Cells in Alginate via High Voltage for Cell-Based Therapies and Cryopreservation. PLoS ONE, 9. · DOI
  122. Ouyang, 2015, 3D printing of HEK 293FT cell-laden hydrogel into macroporous constructs with high cell viability and normal biological functions, Biofabrication, 7, 015010, 10.1088/1758-5090/7/1/015010 · DOI
  123. Lu, J., Zhang, X., Li, J., Yu, L., Chen, E., Zhu, D., Zhang, Y., and Li, L. (2016). A New Fluidized Bed Bioreactor Based on Diversion-Type Microcapsule Suspension for Bioartificial Liver Systems. PLoS ONE, 11. · DOI
  124. Malafaya, 2007, Natural–origin Polymers as Carriers and Scaffolds for Biomolecules and Cell Delivery in Tissue Engineering Applications, Adv. Drug Deliv. Rev., 59, 207, 10.1016/j.addr.2007.03.012 · DOI · Paper page
  125. Duque, R., Shan, Y., Joya, M., Ravichandran, N., Asi, B., Mobed-Miremadi, M., Mulrooney, S., McNeil, M., and Prakash, S. (2018). Effect of artificial cell miniaturization on urea degradation by immobilized E. coli DH5α (pKAU17). Artif. Cells Nanomed. Biotechnol., 1–10. · DOI
  126. Peppas, 1991, Physiologically Responsive Hydrogels, J. Bioact. Compat. Polym., 6, 241, 10.1177/088391159100600303 · DOI
  127. Denton, 2016, Counterion-Induced Swelling of Ionic Microgels, J. Chem. Phys., 145, 164901, 10.1063/1.4964864 · doi:10.1063/1.4964864
  128. Hwang, 2009, The use of murine embryonic stem cells, alginate encapsulation, and rotary microgravity bioreactor in bone tissue engineering, Biomaterials, 30, 499, 10.1016/j.biomaterials.2008.07.028 · DOI · Paper page
  129. Chan, 2011, Effect of formulation of alginate beads on their mechanical behavior and stiffness, Particuology, 9, 228, 10.1016/j.partic.2010.12.002 · DOI · Paper page
  130. Briscoe, 1998, Adhesive Contact Deformation of a Single Microelastomeric Sphere, J. Colloid Interface Sci., 200, 256, 10.1006/jcis.1997.5365 · doi:10.1006/jcis.1997.5365
  131. Yeatts, 2011, Formation of an Aggregated Alginate Construct in a Tubular Perfusion System, Tissue Eng. Part C Methods, 17, 1171, 10.1089/ten.tec.2011.0263 · DOI

Cited by

See all 78

Metadata

Authors
Farias, C., Lyman, R., Hemingway, C., Chau, H., Mahacek, A., Bouzos, E., & Mobed-Miremadi, M.
Venue
Bioengineering
Publisher
MDPI AG
Published
2018-07-31
Volume
5
Issue
3
Pages
59
ISSN
2306-5354
Cited by
78
References
4
Language
en

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Three-Dimensional (3D) Printed Microneedles for Microencapsulated Cell Extrusion. https://app.cochat.ai/papers/10.3390/bioengineering5030059
The paper
Farias, C., Lyman, R., Hemingway, C., Chau, H., Mahacek, A., Bouzos, E., & Mobed-Miremadi, M. (2018). Three-Dimensional (3D) Printed Microneedles for Microencapsulated Cell Extrusion. Bioengineering. https://doi.org/10.3390/bioengineering5030059

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.