Advances on Bone Substitutes through 3D Bioprinting
Open accessThe DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Abstract
Reconstruction of bony defects is challenging when conventional grafting methods are used because of their intrinsic limitations (biological cost and/or biological properties). Bone regeneration techniques are rapidly evolving since the introduction of three-dimensional (3D) bioprinting. Bone tissue engineering is a branch of regenerative medicine that aims to find new solutions to treat bone defects, which can be repaired by 3D printed living tissues. Its aim is to overcome the limitations of conventional treatment options by improving osteoinduction and osteoconduction. Several techniques of bone bioprinting have been developed: inkjet, extrusion, and light-based 3D printers are nowadays available. Bioinks, i.e., the printing materials, also presented an evolution over the years. It seems that these new technologies might be extremely promising for bone regeneration. The purpose of the present review is to give a comprehensive summary of the past, the present, and future developments of bone bioprinting and bioinks, focusing the attention on crucial aspects of bone bioprinting such as selecting cell sources and attaining a viable vascularization within the newly printed bone. The main bioprinters currently available on the market and their characteristics have been taken into consideration, as well.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Hydrogels for tissue engineering: scaffold design variables and applications
Drury, J. L., & Mooney, D. J. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00340-5 · Cited by 5,136
Hydrogels as extracellular matrix mimics for 3D cell culture
Tibbitt, M. W., & Anseth, K. S. (2009) · Biotechnology and Bioengineering · doi:10.1002/bit.22361 · Cited by 2,727 · cited 1×
“Naturally derived hydrogels resemble the native tissue environment since they provide essential features of the ECM components [77], such as a hydrated and mechanically strong 3D microenvironment, where cells can be encapsulated.”
BackgroundPerfusion-decellularized matrix: using nature's platform to engineer a bioartificial heart
Ott, H. C., Matthiesen, T. S., Goh, S.-K., Black, L. D., Kren, S. M., Netoff, T. I., & Taylor, D. A. (2008) · Nature Medicine · doi:10.1038/nm1684 · Cited by 2,650 · cited 1×
“To be prepared, dECM bioinks require the removal of cells from a tissue (through chemical, physical, and enzymatic processes) while preserving only the ECM [91].”
MethodA 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
Decellularization of tissues and organs
Gilbert, T. W., Sellaro, T. L., & Badylak, S. F. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.02.014 · Cited by 2,222
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Giannoudis, P. V., Dinopoulos, H., & Tsiridis, E. (2005) · Injury · doi:10.1016/j.injury.2005.07.029 · Cited by 2,078
Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink
Pati, F., Jang, J., Ha, D.-H., Won Kim, S., Rhie, J.-W., Shim, J.-H., Kim, D.-H., & Cho, D.-W. (2014) · Nature Communications · doi:10.1038/ncomms4935 · Cited by 1,904 · cited 1×
“Once isolated, the bone dECM can be co-printed with biocompatible hydrogels [93,94].”
BackgroundBiodegradable synthetic polymers: Preparation, functionalization and biomedical application
Tian, H., Tang, Z., Zhuang, X., Chen, X., & Jing, X. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.06.004 · Cited by 1,293 · cited 1×
“They are, in general, mechanically robust and durable and can be used as structural support in tissue engineering (TE) (Figure 1) [58].”
BackgroundHydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs
Bertassoni, L. E., Cecconi, M., Manoharan, V., Nikkhah, M., Hjortnaes, J., Cristino, A. L., Barabaschi, G., Demarchi, D., Dokmeci, M. R., Yang, Y., et al. (2014) · Lab Chip · doi:10.1039/c4lc00030g · Cited by 944 · cited 1×
“Several methods can be adopted to create vasculature, for instance, small channels can be printed using EBB in combination with fugitive inks and later on, they can be populated with endothelial cells to reproduce vessel-like structures [146,147].”
MethodCurrent applications of poly(lactic acid) composites in tissue engineering and drug delivery
Liu, S., Qin, S., He, M., Zhou, D., Qin, Q., & Wang, H. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108238 · Cited by 533
Creating perfused functional vascular channels using 3D bio-printing technology
Lee, V. K., Kim, D. Y., Ngo, H., Lee, Y., Seo, L., Yoo, S.-S., Vincent, P. A., & Dai, G. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.05.083 · Cited by 494 · cited 1×
“The main applications of DBB technology regard skin [171], cartilage [172], bone [173,174] and blood vessels bioprinting [34,175,176].”
BackgroundBioprinting for vascular and vascularized tissue biofabrication
Datta, P., Ayan, B., & Ozbolat, I. T. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.01.035 · Cited by 431
Bioprinting Technology: A Current State-of-the-Art Review
Dababneh, A. B., & Ozbolat, I. T. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028512 · Cited by 427 · cited 1×
“EBB has relatively poor resolution, with 100 um as the optimal [159,160], but it is particularly suitable for bioinks with high viscosities and high cell densities [31].”
BackgroundPorzionato, A., Stocco, E., Barbon, S., Grandi, F., Macchi, V., & De Caro, R. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19124117 · Cited by 319
In situ handheld three‐dimensional bioprinting for cartilage regeneration
Di Bella, C., Duchi, S., O'Connell, C. D., Blanchard, R., Augustine, C., Yue, Z., Thompson, F., Richards, C., Beirne, S., Onofrillo, C., et al. (2018) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2476 · Cited by 313 · cited 2×
“This Biopen was utilized to repair chondral defects in a large animal ovine model [198].”
Method3D bioprinting of BM-MSCs-loaded ECM biomimetic hydrogels for in vitro neocartilage formation
Costantini, M., Idaszek, J., Szöke, K., Jaroszewicz, J., Dentini, M., Barbetta, A., Brinchmann, J. E., & Święszkowski, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035002 · Cited by 250
Handheld co-axial bioprinting: application to in situ surgical cartilage repair
Duchi, S., Onofrillo, C., O’Connell, C. D., Blanchard, R., Augustine, C., Quigley, A. F., Kapsa, R. M. I., Pivonka, P., Wallace, G., Di Bella, C., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-05699-x · Cited by 219 · cited 1×
“[196,197] developed a device named “Biopen”, which is basically an EBB bioprinter for in vivo application directly during the surgery.”
BackgroundThe immune reaction and degradation fate of scaffold in cartilage/bone tissue engineering
Yang, D., Xiao, J., Wang, B., Li, L., Kong, X., & Liao, J. (2019) · Materials Science and Engineering: C · doi:10.1016/j.msec.2019.109927 · Cited by 192
Bio-printing Cell-Laden Matrigel-Agarose Constructs
Fan, R., Piou, M., Darling, E., Cormier, D., Sun, J., & Wan, J. (2016) · Journal of Biomaterials Applications · doi:10.1177/0885328216669238 · Cited by 132 · cited 1×
“On the other hand, agarose and Matrigel, albeit mechanically stronger than the Pluronic gel, are affected by unsatisfactory printability and poor resolution [82].”
Background
Cited by
Cao, H., Duan, L., Zhang, Y., Cao, J., & Zhang, K. (2021) · Signal Transduction and Targeted Therapy · doi:10.1038/s41392-021-00830-x · Cited by 1,274
Scaffold Fabrication Technologies and Structure/Function Properties in Bone Tissue Engineering
Collins, M. N., Ren, G., Young, K., Pina, S., Reis, R. L., & Oliveira, J. M. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010609 · Cited by 867
Unraveling of Advances in 3D-Printed Polymer-Based Bone Scaffolds
Xu, Y., Zhang, F., Zhai, W., Cheng, S., Li, J., & Wang, Y. (2022) · Polymers · doi:10.3390/polym14030566 · Cited by 349
“In the process of extruding bio-printing, the greater the extrusion pressure on the needle, the greater the shear stress on the cells in the bio-ink, and the lower the activity of the cells in the printing model [42].”
BackgroundMethodApplication of decellularized bone matrix as a bioscaffold in bone tissue engineering
Amirazad, H., Dadashpour, M., & Zarghami, N. (2022) · Journal of Biological Engineering · doi:10.1186/s13036-021-00282-5 · Cited by 154
Research advances in mechanical properties and applications of dual network hydrogels
Ning, X., Huang, J., A, Y., Yuan, N., Chen, C., & Lin, D. (2022) · International Journal of Molecular Sciences · doi:10.3390/ijms232415757 · Cited by 131
“Hydrogels prepared from a single material are widely used in biological tissue engineering [2].”
Background
Metadata
- Authors
- Genova, T., Roato, I., Carossa, M., Motta, C., Cavagnetto, D., & Mussano, F.
- Venue
- International Journal of Molecular Sciences
- Publisher
- MDPI AG
- Published
- 2020-09-23
- Volume
- 21
- Issue
- 19
- Pages
- 7012
- ISSN
- 1422-0067 (ISSN-L)
- OpenAlex
- W3089189923
- Cited by
- 151
- References
- 21
- FWCI
- 6.64
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.