The DOI matches its Crossref record; 86 of the 86 references it cites were found in a registry or an index.
Recent Advances in Biomaterials for 3D Printing and Tissue Engineering
Open accessAbstract
Three-dimensional printing has significant potential as a fabrication method in creating scaffolds for tissue engineering. The applications of 3D printing in the field of regenerative medicine and tissue engineering are limited by the variety of biomaterials that can be used in this technology. Many researchers have developed novel biomaterials and compositions to enable their use in 3D printing methods. The advantages of fabricating scaffolds using 3D printing are numerous, including the ability to create complex geometries, porosities, co-culture of multiple cells, and incorporate growth factors. In this review, recently-developed biomaterials for different tissues are discussed. Biomaterials used in 3D printing are categorized into ceramics, polymers, and composites. Due to the nature of 3D printing methods, most of the ceramics are combined with polymers to enhance their printability. Polymer-based biomaterials are 3D printed mostly using extrusion-based printing and have a broader range of applications in regenerative medicine. The goal of tissue engineering is to fabricate functional and viable organs and, to achieve this, multiple biomaterials and fabrication methods need to be researched.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Hydrogels in regenerative medicine
Slaughter, B. V., Khurshid, S. S., Fisher, O. Z., Khademhosseini, A., & Peppas, N. A. (2009) · Advanced Materials · doi:10.1002/adma.200802106 · Cited by 2,703
A Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues
Miller, J. S., Stevens, K. R., Yang, M. T., Baker, B. M., Nguyen, D.-H. T., Cohen, D. M., Toro, E., Chen, A. A., Galie, P. A., Yu, X., et al. (2012) · Nature Materials · doi:10.1038/nmat3357 · Cited by 1,917
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Navarro, M., Michiardi, A., Castaño, O., & Planell, J. A. (2008) · Journal of The Royal Society Interface · doi:10.1098/rsif.2008.0151 · Cited by 1,513
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
The bioink: A comprehensive review on bioprintable materials
Hospodiuk, M., Dey, M., Sosnoski, D., & Ozbolat, I. T. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2016.12.006 · Cited by 1,118
Bioink properties before, during and after 3D bioprinting
Hölzl, K., Lin, S., Tytgat, L., Van Vlierberghe, S., Gu, L., & Ovsianikov, A. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/032002 · Cited by 1,070
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,002
3D Printing of Scaffolds for Tissue Regeneration Applications
Do, A., Khorsand, B., Geary, S. M., & Salem, A. K. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201500168 · Cited by 949
Direct 3D bioprinting of perfusable vascular constructs using a blend bioink
Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.07.038 · Cited by 922
3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
Hong, S., Sycks, D., Chan, H. F., Lin, S., Lopez, G. P., Guilak, F., Leong, K. W., & Zhao, X. (2015) · Advanced Materials · doi:10.1002/adma.201501099 · Cited by 873
3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration
Inzana, J. A., Olvera, D., Fuller, S. M., Kelly, J. P., Graeve, O. A., Schwarz, E. M., Kates, S. L., & Awad, H. A. (2014) · Biomaterials · doi:10.1016/j.biomaterials.2014.01.064 · Cited by 840
Design and Fabrication of Human Skin by Three-Dimensional Bioprinting
Lee, V., Singh, G., Trasatti, J. P., Bjornsson, C., Xu, X., Tran, T. N., Yoo, S.-S., Dai, G., & Karande, P. (2014) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2013.0335 · Cited by 725
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
3D biofabrication strategies for tissue engineering and regenerative medicine
Bajaj, P., Schweller, R. M., Khademhosseini, A., West, J. L., & Bashir, R. (2014) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071813-105155 · Cited by 632
3D Bioprinting for Organ Regeneration
Cui, H., Nowicki, M., Fisher, J. P., & Zhang, L. G. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601118 · Cited by 535
Polymers as Biomaterials for Tissue Engineering and Controlled Drug Delivery
Nair, L. S., & Laurencin, C. T. (2006) · Advances in Biochemical Engineering/Biotechnology · doi:10.1007/b137240 · Cited by 533
Yang, X., Lu, Z., Wu, H., Li, W., Zheng, L., & Zhao, J. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2017.09.002 · Cited by 533
Laronda, M. M., Rutz, A. L., Xiao, S., Whelan, K. A., Duncan, F. E., Roth, E. W., Woodruff, T. K., & Shah, R. N. (2017) · Nature Communications · doi:10.1038/ncomms15261 · Cited by 527
Misch, C. E., Qu, Z., & Bidez, M. W. (1999) · Journal of Oral and Maxillofacial Surgery · doi:10.1016/s0278-2391(99)90437-8 · Cited by 509
Shor, L., Güçeri, S., Wen, X., Gandhi, M., & Sun, W. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.08.018 · Cited by 494
Novel Biomaterials Used in Medical 3D Printing Techniques
Tappa, K., & Jammalamadaka, U. (2018) · Journal of Functional Biomaterials · doi:10.3390/jfb9010017 · Cited by 490
Self-citationCartilage Tissue Engineering by the 3D Bioprinting of iPS Cells in a Nanocellulose/Alginate Bioink
Nguyen, D., Hägg, D. A., Forsman, A., Ekholm, J., Nimkingratana, P., Brantsing, C., Kalogeropoulos, T., Zaunz, S., Concaro, S., Brittberg, M., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-00690-y · Cited by 484
Techniques for fabrication and construction of three-dimensional scaffolds for tissue engineering
Lu, T., Li, Y., & Chen, T. (2013) · International Journal of Nanomedicine · doi:10.2147/ijn.s38635 · Cited by 477
Kim, S. S., Utsunomiya, H., Koski, J. A., Wu, B. M., Cima, M. J., Sohn, J., Mukai, K., Griffith, L. G., & Vacanti, J. P. (1998) · Annals of Surgery · doi:10.1097/00000658-199807000-00002 · Cited by 451
Duan, B., Kapetanovic, E., Hockaday, L. A., & Butcher, J. T. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.12.005 · Cited by 436
Designing of PLA scaffolds for bone tissue replacement fabricated by ordinary commercial 3D printer
Gregor, A., Filová, E., Novák, M., Kronek, J., Chlup, H., Buzgo, M., Blahnová, V., Lukášová, V., Bartoš, M., Nečas, A., et al. (2017) · Journal of Biological Engineering · doi:10.1186/s13036-017-0074-3 · Cited by 406
Emerging Biofabrication Strategies for Engineering Complex Tissue Constructs
Pedde, R. D., Mirani, B., Navaei, A., Styan, T., Wong, S., Mehrali, M., Thakur, A., Mohtaram, N. K., Bayati, A., Dolatshahi‐Pirouz, A., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606061 · Cited by 388
Roohani-Esfahani, S.-I., Newman, P., & Zreiqat, H. (2016) · Scientific Reports · doi:10.1038/srep19468 · Cited by 380
3D bioprinting of methacrylated hyaluronic acid (MeHA) hydrogel with intrinsic osteogenicity
Poldervaart, M. T., Goversen, B., de Ruijter, M., Abbadessa, A., Melchels, F. P. W., Öner, F. C., Dhert, W. J. A., Vermonden, T., & Alblas, J. (2017) · PLOS ONE · doi:10.1371/journal.pone.0177628 · Cited by 357
Nonallograft Osteoconductive Bone Graft Substitutes
Bucholz, R. W. (2002) · Clinical Orthopaedics and Related Research · doi:10.1097/00003086-200202000-00006 · Cited by 356
Wang, W., Caetano, G., Ambler, W., Blaker, J., Frade, M., Mandal, P., Diver, C., & Bártolo, P. (2016) · Materials · doi:10.3390/ma9120992 · Cited by 330
3D-Printed ABS and PLA Scaffolds for Cartilage and Nucleus Pulposus Tissue Regeneration
Rosenzweig, D., Carelli, E., Steffen, T., Jarzem, P., & Haglund, L. (2015) · International Journal of Molecular Sciences · doi:10.3390/ijms160715118 · Cited by 326
Bio-inspired detoxification using 3D-printed hydrogel nanocomposites
Gou, M., Qu, X., Zhu, W., Xiang, M., Yang, J., Zhang, K., Wei, Y., & Chen, S. (2014) · Nature Communications · doi:10.1038/ncomms4774 · Cited by 323
Gaetani, R., Feyen, D. A. M., Verhage, V., Slaats, R., Messina, E., Christman, K. L., Giacomello, A., Doevendans, P. A. F. M., & Sluijter, J. P. G. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.05.005 · Cited by 307
Direct Ink Write (DIW) 3D Printed Cellulose Nanocrystal Aerogel Structures
Li, V. C.-F., Dunn, C. K., Zhang, Z., Deng, Y., & Qi, H. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-07771-y · Cited by 269
Dong, L., Wang, S.-J., Zhao, X.-R., Zhu, Y.-F., & Yu, J.-K. (2017) · Scientific Reports · doi:10.1038/s41598-017-13838-7 · Cited by 268
Three-Dimensional Printed Multiphase Scaffolds for Regeneration of Periodontium Complex
Lee, C. H., Hajibandeh, J., Suzuki, T., Fan, A., Shang, P., & Mao, J. J. (2014) · Tissue Engineering Part A · doi:10.1089/ten.tea.2013.0386 · Cited by 234
Textile Technologies and Tissue Engineering: A Path Toward Organ Weaving
Akbari, M., Tamayol, A., Bagherifard, S., Serex, L., Mostafalu, P., Faramarzi, N., Mohammadi, M. H., & Khademhosseini, A. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500517 · Cited by 215
Castro, N. J., O'Brien, J., & Zhang, L. G. (2015) · Nanoscale · doi:10.1039/c5nr03425f · Cited by 209
Zhang, H., Mao, X., Du, Z., Jiang, W., Han, X., Zhao, D., Han, D., & Li, Q. (2016) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2016.1145532 · Cited by 208
Tarafder, S., & Bose, S. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501048n · Cited by 204
Advances in Polymeric Systems for Tissue Engineering and Biomedical Applications
Ravichandran, R., Sundarrajan, S., Venugopal, J. R., Mukherjee, S., & Ramakrishna, S. (2012) · Macromolecular Bioscience · doi:10.1002/mabi.201100325 · Cited by 201
High-Resolution Patterned Cellular Constructs by Droplet-Based 3D Printing
Graham, A. D., Olof, S. N., Burke, M. J., Armstrong, J. P. K., Mikhailova, E. A., Nicholson, J. G., Box, S. J., Szele, F. G., Perriman, A. W., & Bayley, H. (2017) · Scientific Reports · doi:10.1038/s41598-017-06358-x · Cited by 201
Miao, S., Zhu, W., Castro, N. J., Leng, J., & Zhang, L. G. (2016) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2015.0542 · Cited by 187
Cui, H., Zhu, W., Nowicki, M., Zhou, X., Khademhosseini, A., & Zhang, L. G. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600505 · Cited by 185
Suntornnond, R., Tan, E. Y. S., An, J., & Chua, C. K. (2017) · Scientific Reports · doi:10.1038/s41598-017-17198-0 · Cited by 183
Coaxial 3D bioprinting of self-assembled multicellular heterogeneous tumor fibers
Dai, X., Liu, L., Ouyang, J., Li, X., Zhang, X., Lan, Q., & Xu, T. (2017) · Scientific Reports · doi:10.1038/s41598-017-01581-y · Cited by 173
Cryogenic 3D Printing of Super Soft Hydrogels
Tan, Z., Parisi, C., Silvio, L. D., Dini, D., & Forte, A. E. (2017) · Scientific Reports · doi:10.1038/s41598-017-16668-9 · Cited by 153
In Vivo Chondrogenesis in 3D Bioprinted Human Cell-laden Hydrogel Constructs
Möller, T., Amoroso, M., Hägg, D. A., Brantsing, C., Rotter, N., Apelgren, P., Lindahl, A. H., Kölby, L., & Gatenholm, P. (2017) · Plastic & Reconstructive Surgery Global Open · doi:10.1097/gox.0000000000001227 · Cited by 145
Jiang, T., Munguia-López, J. G., Flores-Torres, S., Grant, J., Vijayakumar, S., León‐Rodríguez, A. D., & Kinsella, J. M. (2017) · Scientific Reports · doi:10.1038/s41598-017-04691-9 · Cited by 141
Bio-printing Cell-Laden Matrigel-Agarose Constructs
Fan, R., Piou, M., Darling, E., Cormier, D., Sun, J., & Wan, J. (2016) · Journal of Biomaterials Applications · doi:10.1177/0885328216669238 · Cited by 132
Qi, X., Pei, P., Zhu, M. C., Du, X., Xin, C., Zhao, S., Li, X., & Zhu, Y. (2017) · Scientific Reports · doi:10.1038/srep42556 · Cited by 125
Effects of 3D-Printed Polycaprolactone/β-Tricalcium Phosphate Membranes on Guided Bone Regeneration
Shim, J., Won, J.-Y., Park, J.-H., Bae, J.-H., Ahn, G., Kim, C., Lim, D.-H., Cho, D., Yun, W., Bae, E., et al. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18050899 · Cited by 125
Shim, J., Kim, S. E., Park, J. Y., Kundu, J., Kim, S. W., Kang, S. S., & Cho, D. (2014) · Tissue Engineering Part A · doi:10.1089/ten.tea.2013.0513 · Cited by 112
Yang, F., Chen, C., Zhou, Q., Gong, Y., Li, R., Li, C., Klämpfl, F., Freund, S., Wu, X., Sun, Y., et al. (2017) · Scientific Reports · doi:10.1038/srep45360 · Cited by 109
Zhang, H., Mao, X., Zhao, D., Jiang, W., Du, Z., Li, Q., Jiang, C.-H., & Han, D. (2017) · Scientific Reports · doi:10.1038/s41598-017-14923-7 · Cited by 101
Development of Novel Three-Dimensional Printed Scaffolds for Osteochondral Regeneration
Holmes, B. B., Zhu, W., Li, J., Lee, J. D., & Zhang, L. G. (2014) · Tissue Engineering Part A · doi:10.1089/ten.tea.2014.0138 · Cited by 92
Li, C., Jiang, C., Deng, Y., Li, T., Li, N., Peng, M., & Wang, J. (2017) · Scientific Reports · doi:10.1038/srep41331 · Cited by 92
Zhang, W., Lian, Q., Li, D., Wang, K., Hao, D., Bian, W., He, J., & Jin, Z. (2014) · BioMed Research International · doi:10.1155/2014/746138 · Cited by 87
Multifunctional 3D printing of heterogeneous hydrogel structures
Nadernezhad, A., Khani, N., Skvortsov, G. A., Toprakhisar, B., Bakırcı, E., Menceloǵlu, Y. Z., Ünal, S., & Koç, B. (2016) · Scientific Reports · doi:10.1038/srep33178 · Cited by 87
John, A., Subramanian, A. P., Vellayappan, M. V., Balaji, A., Jaganathan, S. K., Mohandas, H., Thanalechumi, P., Supriyanto, E., & Yusof, M. (2015) · RSC Advances · doi:10.1039/c5ra03018h · Cited by 85
Deng, Y., Jiang, C., Li, C., Li, T., Peng, M., Wang, J., & Dai, K. (2017) · Scientific Reports · doi:10.1038/s41598-017-05196-1 · Cited by 85
Asadi‐Eydivand, M., Solati‐Hashjin, M., Shafiei, S. S., Mohammadi, S., Hafezi, M., & Osman, N. A. A. (2016) · PLoS ONE · doi:10.1371/journal.pone.0151216 · Cited by 74
Ritz, U., Gerke, R., Götz, H., Stein, S., & Rommens, P. M. (2017) · International Journal of Molecular Sciences · doi:10.3390/ijms18122569 · Cited by 72
Three-dimensional (3D) printing of mouse primary hepatocytes to generate 3D hepatic structure
Kim, Y., Kang, K., Jeong, J., Paik, S. S., Kim, J. S., Park, S. A., Kim, W. D., Park, J., & Choi, D. (2017) · Annals of Surgical Treatment and Research · doi:10.4174/astr.2017.92.2.67 · Cited by 72
Printable Fluorescent Hydrogels Based on Self-Assembling Peptides
Xia, Y., Xue, B., Qin, M., Cao, Y., Li, Y., & Wang, W. (2017) · Scientific Reports · doi:10.1038/s41598-017-10162-y · Cited by 68
3D CELL BIOPRINTING FOR REGENERATIVE MEDICINE RESEARCH AND THERAPIES
Khatiwala, C. B., LAW, R., Shepherd, B. R., Dorfman, S., & CSETE, M. E. (2011) · Gene Therapy and Regulation · doi:10.1142/s1568558611000301 · Cited by 67
Williams, S. K., Touroo, J. S., Church, K. H., & Hoying, J. B. (2013) · BioResearch open access · doi:10.1089/biores.2013.0046 · Cited by 64
Hwang, K.-S., Choi, J.-W., Kim, J., Chung, H. Y., Jin, S., Shim, J., Yun, W., Jeong, C.-M., & Huh, J. (2017) · Materials · doi:10.3390/ma10040421 · Cited by 64
3D Printing Bioceramic Porous Scaffolds with Good Mechanical Property and Cell Affinity
Chang, C., Lin, C., Liu, F.-H., Chen, M. H., Lin, C., Ho, H., & Liao, Y.-S. (2015) · PLoS ONE · doi:10.1371/journal.pone.0143713 · Cited by 62
Mellor, L. F., Huebner, P., Cai, S., Mohiti‐Asli, M., Taylor, M. A., Spang, J. T., Shirwaiker, R. A., & Loboa, E. G. (2017) · BioMed Research International · doi:10.1155/2017/6956794 · Cited by 60
3D Printing of Octacalcium Phosphate Bone Substitutes
Комлев, В. С., Popov, V. K., Mironov, A. V., Fedotov, A. Y., Teterina, A. Y., Смирнов, И. В., Bozo, I. Y., Александровна, Р. В., & Deev, R. V. (2015) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2015.00081 · Cited by 57
A building-block approach to 3D printing a multichannel, organ-regenerative scaffold
Wang, X., Rijff, B. L., & Khang, G. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2038 · Cited by 53
3D printed hyperelastic “bone” scaffolds and regional gene therapy: A novel approach to bone healing
Alluri, R. K., Jakus, A. E., Bougioukli, S., Pannell, W. C., Sugiyama, O., Tang, A., Shah, R. N., & Lieberman, J. R. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36310 · Cited by 52
Stem cell bioprinting for applications in regenerative medicine
Tricomi, B. J., Dias, A. D., & Corr, D. T. (2016) · Annals of the New York Academy of Sciences · doi:10.1111/nyas.13266 · Cited by 44
Zheng, P., Yao, Q., Mao, F., Liu, N., Xu, Y., Wei, B., & Wang, L. (2017) · Molecular Medicine Reports · doi:10.3892/mmr.2017.7266 · Cited by 42
Zhao, M.-L., Li, X.-H., Fu, F., Qin, Z., Xu, C., Chen, X., Li, R., Wang, L., Peng, D., Sun, H., et al. (2017) · Neural Regeneration Research · doi:10.4103/1673-5374.205101 · Cited by 37
Moussa, M., Carrel, J., Scherrer, S. S., et al. (2015) · Materials · doi:10.3390/ma8052174 · Cited by 35
3D Printable Biophotopolymers for in Vivo Bone Regeneration
Russmueller, G., Liska, R., Stampfl, J., Heller, C. M., Mautner, A., Macfelda, K., Kapeller, B., Lieber, R., Haider, A., Mika, K., et al. (2015) · Materials · doi:10.3390/ma8063685 · Cited by 23
Tan, Y. J., Tan, X., Yeong, W. Y., & Tor, S. B. (2016) · Materials · doi:10.3390/ma9110893 · Cited by 18
Naturally Occurring Scaffold Materials
Badylak, S. F. (2008) · Elsevier eBooks · doi:10.1016/b978-012369410-2.50036-x · Cited by 11
Hacker, M. C., & Mikos, A. G. (2008) · Elsevier eBooks · doi:10.1016/b978-012369410-2.50037-1 · Cited by 8
Cited by
Progress in 3D bioprinting technology for tissue/organ regenerative engineering
Matai, I., Kaur, G., Seyedsalehi, A., McClinton, A., & Laurencin, C. T. (2020) · Biomaterials · doi:10.1016/j.biomaterials.2019.119536 · Cited by 1,156
Recent advances in biomaterials for 3D scaffolds: A review
Nikolova, M. P., & Chavali, M. S. (2019) · Bioactive Materials · doi:10.1016/j.bioactmat.2019.10.005 · Cited by 907
Three-dimensional (3D) printed scaffold and material selection for bone repair
Zhang, L., Yang, G., Johnson, B. N., & Jia, X. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.11.039 · Cited by 865
Biopolymer: A Sustainable Material for Food and Medical Applications
Baranwal, J., Barse, B., Fais, A., Delogu, G. L., & Kumar, A. (2022) · Polymers · doi:10.3390/polym14050983 · Cited by 727
An Introduction to 3D Bioprinting: Possibilities, Challenges and Future Aspects
Kačarević, Ž. P., Rider, P. M., Alkildani, S., Retnasingh, S., Smeets, R., Jung, O., Ivanišević, Z., & Barbeck, M. (2018) · Materials · doi:10.3390/ma11112199 · Cited by 479
Metadata
- Authors
- Jammalamadaka, U., & Tappa, K.
- Venue
- Journal of Functional Biomaterials
- Publisher
- MDPI AG
- Published
- 2018-03-01
- Volume
- 9
- Issue
- 1
- Pages
- 22
- ISSN
- 2079-4983 (ISSN-L)
- OpenAlex
- W2792647185
- Cited by
- 526
- References
- 86
- FWCI
- 21.99
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.