The DOI matches its Crossref record; 72 of the 72 references it cites were found in a registry or an index.
Support Structures for Additive Manufacturing: A Review
Open accessAbstract
Additive manufacturing (AM) has developed rapidly since its inception in the 1980s. AM is perceived as an environmentally friendly and sustainable technology and has already gained a lot of attention globally. The potential freedom of design offered by AM is, however, often limited when printing complex geometries due to an inability to support the stresses inherent within the manufacturing process. Additional support structures are often needed, which leads to material, time and energy waste. Research in support structures is, therefore, of great importance for the future and further improvement of additive manufacturing. This paper aims to review the varied research that has been performed in the area of support structures. Fifty-seven publications regarding support structure optimization are selected and categorized into six groups for discussion. A framework is established in which future research into support structures can be pursued and standardized. By providing a comprehensive review and discussion on support structures, AM can be further improved and developed in terms of support waste in the future, thus, making AM a more sustainable technology.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A note on two problems in connexion with graphs
Dijkstra, E. W. (1959) · Numerische Mathematik · doi:10.1007/bf01386390 · Cited by 29,065
A Review of Additive Manufacturing
Wong, K. V., & Hernandez, A. (2012) · ISRN Mechanical Engineering · doi:10.5402/2012/208760 · Cited by 2,555
3-D printing: The new industrial revolution
Berman, B. (2012) · Business Horizons · doi:10.1016/j.bushor.2011.11.003 · Cited by 2,481
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
Additive manufacturing methods and modelling approaches: a critical review
Bikas, H., Stavropoulos, P., & Chryssolouris, G. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7576-2 · Cited by 1,427
Guest, J. K., Prévost, J. H., & Belytschko, T. (2004) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1064 · Cited by 1,300
A comparison of rapid prototyping technologies
Pham, D. T., & Gault, R. S. (1998) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(97)00137-5 · Cited by 915
Three-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., & Cornie, J. (1990) · CIRP Annals · doi:10.1016/s0007-8506(07)61035-x · Cited by 871
Additive manufacturing in the spare parts supply chain
Khajavi, S. H., Partanen, J., & Holmström, J. (2014) · Computers in Industry · doi:10.1016/j.compind.2013.07.008 · Cited by 683
Additive manufacturing technologies: state of the art and trends
Gardan, J. (2016) · International Journal of Production Research · doi:10.1080/00207543.2015.1115909 · Cited by 489
Calignano, F. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.07.043 · Cited by 486
Practical considerations and capabilities for laser assisted direct metal deposition
Lewis, G. K., & Schlienger, E. (2000) · Materials & Design (1980-2015) · doi:10.1016/s0261-3069(99)00078-3 · Cited by 484
Gaynor, A. T., & Guest, J. K. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1551-x · Cited by 476
Advanced lattice support structures for metal additive manufacturing
Hussein, A., Hao, L., Yan, C., Everson, R., & Young, P. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2013.01.020 · Cited by 454
Costs and Cost Effectiveness of Additive Manufacturing
Thomas, D. S., & Gilbert, S. W. (2014) · doi:10.6028/nist.sp.1176 · Cited by 443
3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding
Hinton, T. J., Hudson, A., Pusch, K., Lee, A., & Feinberg, A. W. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00170 · Cited by 437
Experimental characterization of the mechanical properties of 3D-printed ABS and polycarbonate parts
Cantrell, J. T., Rohde, S., Damiani, D., Gurnani, R., DiSandro, L., Anton, J., Young, A., Jerez, A., Steinbach, D., Kroese, C., et al. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2016-0042 · Cited by 433
Analysis of rapid manufacturing—using layer manufacturing processes for production
Hopkinson, N., & Dicknes, P. (2003) · Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · doi:10.1243/095440603762554596 · Cited by 412
Topology optimization of 3D self-supporting structures for additive manufacturing
Langelaar, M. (2016) · Additive Manufacturing · doi:10.1016/j.addma.2016.06.010 · Cited by 405
Selective Laser Melting: A manufacturing technology for the future?
Bremen, S., Meiners, W., & Diatlov, A. (2012) · Laser Technik Journal · doi:10.1002/latj.201290018 · Cited by 402
A new approach to the design and optimisation of support structures in additive manufacturing
Strano, G., Hao, L., Everson, R. M., & Evans, K. E. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4403-x · Cited by 389
The rapid prototyping technologies
Upcraft, S., & Fletcher, R. (2003) · Assembly Automation · doi:10.1108/01445150310698634 · Cited by 367
Leary, M., Merli, L., Torti, F., et al. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.06.015 · Cited by 363
Perspectives on Additive Manufacturing
Bourell, D. L. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031606 · Cited by 362
Topology Optimization for Additive Manufacturing
Brackett, D., Ashcroft, I., & Hague, R. (2011) · doi:10.26153/tsw/15300 · Cited by 347
A model research for prototype warp deformation in the FDM process
Wang, T.-M., Xi, J.-T., & Jin, Y. (2007) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-006-0556-9 · Cited by 331
Zhang, Y., & Chou, K. (2008) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1243/09544054jem990 · Cited by 321
Support structure constrained topology optimization for additive manufacturing
Mirzendehdel, A. M., & Suresh, K. (2016) · Computer-Aided Design · doi:10.1016/j.cad.2016.08.006 · Cited by 318
Design 3D printing cementitious materials via Fuller Thompson theory and Marson-Percy model
Weng, Y., Li, M., Tan, M. J., & Qian, S. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.12.112 · Cited by 304
Build-to-last: strength to weight 3D printed objects
Lu, L., Sharf, A., Zhao, H., Wei, Y., Fan, Q., Chen, X., Savoye, Y., Tu, C., Cohen-Or, D., & Chen, B. (2014) · ACM Transactions on Graphics · doi:10.1145/2601097.2601168 · Cited by 290
Clever Support: Efficient Support Structure Generation for Digital Fabrication
Vanek, J., Galicia, J. A. G., & Benes, B. (2014) · Computer Graphics Forum · doi:10.1111/cgf.12437 · Cited by 268
Cost-effective printing of 3D objects with skin-frame structures
Wang, W., Wang, T. Y., Yang, Z., et al. (2013) · ACM Transactions on Graphics · doi:10.1145/2508363.2508382 · Cited by 252
Practical support structures for selective laser melting
Gan, M., & Chee How, W. O. N. G. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.08.006 · Cited by 204
A Review of Robocasting Technology
Cesarano, J. (1998) · MRS Proceedings · doi:10.1557/proc-542-133 · Cited by 193
Self-supporting rhombic infill structures for additive manufacturing
Wu, J., Wang, C. C. L., Zhang, X., et al. (2016) · Computer-Aided Design · doi:10.1016/j.cad.2016.07.006 · Cited by 189
Laser-Induced Materials and Processes for Rapid Prototyping
Lü, L., Fuh, J. Y. H., & Wong, Y. S. (2001) · Springer eBooks · doi:10.1007/978-1-4615-1469-5 · Cited by 188
Optimal part deposition orientation in FDM by using a multicriteria genetic algorithm
Pandey, P. M., Thrimurthulu, K., & Reddy *, N. V. (2004) · International Journal of Production Research · doi:10.1080/00207540410001708470 · Cited by 186
Expert system-based selection of the preferred direction of build for rapid prototyping processes
Frank, D., & Fadel, G. (1995) · Journal of Intelligent Manufacturing · doi:10.1007/bf00124677 · Cited by 186
Support slimming for single material based additive manufacturing
Hu, K., Jin, S., & Wang, C. C. L. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.03.001 · Cited by 178
Laser engineered net shaping (LENS™): A tool for direct fabrication of metal parts
Atwood, C. L., Griffith, M. L., Harwell, L. D., Schlienger, E., Ensz, M. T., Smugeresky, J. E., Romero, T., Greene, D., & Reckaway, D. E. (1998) · International Congress on Applications of Lasers & Electro-Optics (ICALEO) · doi:10.2351/1.5059147 · Cited by 173
Optimization of scaffold design for bone tissue engineering: A computational and experimental study
Dias, M. R., Guedes, J. M., Flanagan, C. L., Hollister, S. J., & Fernandes, P. R. (2014) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2014.02.010 · Cited by 171
Dumas, J., Hergel, J., & Lefèbvre, S. (2014) · ACM Transactions on Graphics · doi:10.1145/2601097.2601153 · Cited by 167
Healing simulation for bond strength prediction of FDM
Coogan, T. J., & Kazmer, D. O. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-03-2016-0051 · Cited by 166
Costa, L. A., & Vilar, R. (2009) · Rapid Prototyping Journal · doi:10.1108/13552540910979785 · Cited by 162
Granular gel support-enabled extrusion of three-dimensional alginate and cellular structures
Jin, Y., Compaan, A., Bhattacharjee, T., & Huang, Y. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025016 · Cited by 161
Paul, R., & Anand, S. (2014) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2014.06.014 · Cited by 157
Perceptual models of preference in 3D printing direction
Zhang, X., Le, X., Panotopoulou, A., Whiting, E., & Wang, C. C. L. (2015) · ACM Transactions on Graphics · doi:10.1145/2816795.2818121 · Cited by 151
Residual stress measurement in Fused Deposition Modelling parts
Casavola, C., Cazzato, A., Moramarco, V., & Pappalettera, G. (2017) · Polymer Testing · doi:10.1016/j.polymertesting.2017.01.003 · Cited by 146
Ding, Y., Dwivedi, R., & Kovacevic, R. (2016) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2016.08.008 · Cited by 144
Vaidya, R., & Anand, S. (2016) · Procedia Manufacturing · doi:10.1016/j.promfg.2016.08.072 · Cited by 120
Jiang, J., Stringer, J., Xu, X. W., & Zhong, R. Y. (2018) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2018.1466398 · Cited by 120
Self-citationOnline Structure Analysis for Real-Time Indoor Scene Reconstruction
Zhang, Y., Xu, W., Tong, Y., & Zhou, K. (2015) · ACM Transactions on Graphics · doi:10.1145/2768821 · Cited by 116
Part Orientation in Stereolithography
Pham, D. T., Dimov, S., & Gault, R. (1999) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s001700050118 · Cited by 115
Dissolvable Metal Supports for 3D Direct Metal Printing
Hildreth, O. J., Nassar, A. R., Chasse, K. R., & Simpson, T. W. (2016) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2016.0013 · Cited by 103
Support structure design in additive manufacturing based on topology optimization
Kuo, Y.-H., Cheng, C.-C., Lin, Y., & San, C.-H. (2017) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-017-1743-z · Cited by 103
Zhou, X., Hsieh, S., & Sun, Y. (2017) · Virtual and Physical Prototyping · doi:10.1080/17452759.2017.1317214 · Cited by 101
Medial axis tree—an internal supporting structure for 3D printing
Zhang, X., Xia, Y., Wang, J., et al. (2015) · Computer Aided Geometric Design · doi:10.1016/j.cagd.2015.03.012 · Cited by 98
Das, P., Mhapsekar, K., Chowdhury, S., Samant, R., & Anand, S. (2017) · Computer-Aided Design and Applications · doi:10.1080/16864360.2017.1308074 · Cited by 97
ON THE COMPUTATION OF PART ORIENTATION USING SUPPORT STRUCTURES IN LAYERED MANUFACTURING
Dutta, D. (2018) · Texas ScholarWorks (Texas Digital Library) · doi:10.15781/t24f1n368 · Cited by 83
Sloping wall structure support generation for fused deposition modeling
Xiaomao, H., Ye, C., Wu, S., Guo, K., & Mo, J. (2008) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-008-1675-2 · Cited by 79
Inclined layer printing for fused deposition modeling without assisted supporting structure
Zhao, H., He, Y., Fu, J., & Qiu, J. (2017) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2017.11.011 · Cited by 70
A Study on State of the Art Technology of Laminated Object Manufacturing (LOM)
Mekonnen, B. G., Bright, G., & Walker, A. (2016) · Lecture notes in mechanical engineering · doi:10.1007/978-81-322-2740-3_21 · Cited by 63
Lee, J., & Lee, K. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9239-3 · Cited by 53
Five-Axis Ultrasonic Additive Manufacturing for Nuclear Component Manufacture
Hehr, A., Wenning, J., Terrani, K. A., Babu, S. S., & Norfolk, M. (2016) · JOM · doi:10.1007/s11837-016-2205-6 · Cited by 52
Liu, J., & Li, L. (2004) · Optics & Laser Technology · doi:10.1016/j.optlastec.2003.12.003 · Cited by 51
Support generation for additive manufacturing based on sliced data
Jin, Y. Q., He, Y., & Fu, J. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7190-3 · Cited by 45
A Method to Eliminate Anchors/Supports from Directly Laser Melted Metal Powder Bed Processes
Mumtaz, K., Vora, P., & Hopkinson, N. (2011) · White Rose Research Online (University of Leeds, The University of Sheffield, University of York) · doi:10.26153/tsw/15277 · Cited by 33
Weak support material techniques for alternative additive manufacturing materials
Barnett, E., & Gosselin, C. (2015) · Additive manufacturing · doi:10.1016/j.addma.2015.06.002 · Cited by 29
Mass Customization: Reuse of Digital Slicing for Additive Manufacturing
Kwok, T.-H., Ye, H., Chen, Y., Zhou, C., & Xu, W. (2016) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4034010 · Cited by 27
Gardan, N., Schneider, A., & Gardan, J. (2015) · Computer-Aided Design and Applications · doi:10.1080/16864360.2015.1059192 · Cited by 24
Preliminary investigation on cellular support structures using SLM process
Hussein, A., Yan, C., Everson, R., & Hao, L. (2011) · CRC Press eBooks · doi:10.1201/b11341-97 · Cited by 20
Cited by
Jafari, D., Vaneker, T. H. J., & Gibson, I. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.109471 · Cited by 605
Recent developments in polymers/polymer nanocomposites for additive manufacturing
Wu, H., Fahy, W. P., Kim, S., Kim, H., Zhao, N., Pilato, L., Kafi, A., Bateman, S., & Koo, J. H. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100638 · Cited by 531
Surface post-treatments for metal additive manufacturing: Progress, challenges, and opportunities
Maleki, E., Bagherifard, S., Bandini, M., & Guagliano, M. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101619 · Cited by 528
Beautiful and Functional: A Review of Biomimetic Design in Additive Manufacturing
du Plessis, A., Broeckhoven, C., Yadroitsava, I., Yadroitsev, I., Hands, C. H., Kunju, R., & Bhate, D. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.033 · Cited by 448
State-of-the-art of selective laser melting process: A comprehensive review
Sefene, E. M. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.04.002 · Cited by 429
Metadata
- Authors
- Jiang, J., Xu, X., & Stringer, J.
- Venue
- Journal of Manufacturing and Materials Processing
- Publisher
- MDPI AG
- Published
- 2018-09-20
- Volume
- 2
- Issue
- 4
- Pages
- 64
- ISSN
- 2504-4494 (ISSN-L)
- OpenAlex
- W2890746956
- Cited by
- 527
- References
- 72
- FWCI
- 24.57
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.