Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Open accessThe DOI matches its Crossref record; 147 of the 151 references it cites were found in a registry or an index; 5 of the 201 sources its claims cite were checked for support.
Abstract
Cellulose is the most abundant biomass material in nature. Extracted from natural fibers, its hierarchical and multi-level organization allows different kinds of nanoscaled cellulosic fillers—called cellulose nanocrystals or microfibrillated cellulose (MFC)—to be obtained. Recently, such cellulose nanoparticles have been the focus of an exponentially increasing number of works or reviews devoted to understanding such materials and their applications. Major studies over the last decades have shown that cellulose nanoparticles could be used as fillers to improve mechanical and barrier properties of biocomposites. Their use for industrial packaging is being investigated, with continuous studies to find innovative solutions for efficient and sustainable systems. Processing is more and more important and different systems are detailed in this paper depending on the polymer solubility, i.e., (i) hydrosoluble systems, (ii) non-hydrosoluble systems, and (iii) emulsion systems. This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.
Overview
CoChat Summary
TL;DR
This review summarizes preparation, properties, and applications of cellulosic bionanocomposites reinforced with cellulose nanocrystals/whiskers and microfibrillated cellulose (MFC). It reports that these nanofillers can strongly improve mechanical and barrier properties, often via a percolating hydrogen-bonded network, while processing and industrial scale-up remain challenging.
Key findings
- Cellulose nanoparticles act as effective reinforcing fillers; the strong effect is generally attributed to formation of a percolating network above the percolation threshold from hydrogen bonding between nanoparticles.
- Mechanical examples include poly(S-co-BuA) latex with 30 wt% wheat straw cellulose whiskers showing a rubbery Young’s modulus more than 1000-times higher than the bulk matrix; 10 wt% cellulose palm tree whiskers in natural rubber decreased strain at break from 575% to 16%; 5 wt% MFC improved PU modulus by approximately 200% at 5 °C and close to 500% at 85 °C; and PLA-MFC modulus increased from 5 GPa at 10 wt% MFC to almost 9 GPa at 70 wt% MFC.
- Barrier properties can improve: pure MFC films had oxygen transmission rate values of 17.0 and 17.8 mL m⁻² day⁻¹; MFC coating on PLA decreased OTR from 746 to 1 mL m⁻² day⁻¹ Pa⁻¹; and 10 wt% sulfonated whiskers in xylan/sorbitol films decreased WVTR from 304 to 174 g h⁻¹ m⁻².
- Thermal behavior varies: several studies found no important Tg changes with cellulose nanofillers, while moisture, plasticization, and filler content can alter Tg and crystallinity depending on the system.
Methods
- Narrative review of cellulose nanoparticles (whiskers/nanocrystals and MFC), their preparation, characterization, properties, and applications, citing more than 150 references.
- Describes processing routes classified by polymer solubility: hydrosoluble systems, emulsion systems, and non-hydrosoluble systems, plus solvent casting, extrusion, surfactant coating, and surface chemical modification/grafting.
- No new experimental data are generated; the paper synthesizes selected published works and cites SciFinder literature trends, e.g., papers on “cellulose and nano” increased from 57 in 2000 to more than 700 in 2009.
Limitations
- The paper states that toxicity is not discussed because of “a lot of uncertainty,” that practical transition from laboratory to industrial scale is not simple and requires chemical engineering to reduce nanoparticle production costs, and that inconsistent terminology for cellulose nanoparticles causes misunderstanding and ambiguity.
- Evident from the text: as a narrative review, it summarizes “some selected works” rather than using a described systematic search or inclusion criteria, and it does not perform quantitative meta-analysis.
- Evident from the text: many property claims are drawn from cited studies rather than independently verified here, and the review notes limited reported use of cellulose nanocrystals for barrier properties and possible porosity in nanocomposite films reducing MFC efficiency.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
5 Valid · 6 Not valid · 149 Not checked · 42 Own results and interpretations
In the paper
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers. This result was surprising due to the high specific area of such nanofillers, e.g., around 170 m 2 g -1 for tunicin whiskers [139].”
- Also stated in: § 3.2. Thermal Properties · plain
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers.”
What the sources say
- Not checked — no full text of the sourcecites [139] Angles, 2000, Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 3.2. Thermal Properties · plain
In the paper
“However, it seems that, at least under the conditions presented in this work, the cellulose chemical modification via grafting-from technique changes partially the cellulose crystallinity.”
What the sources say
- Not checked — no full text of the sourcecites [44] Morandi, 2009, Cellulose nanocrystals grafted with polystyrene chains through surface-initiated atom transfer radical polymerization (SI-ATRP), Langmuir source
hedgedstates a possible causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“Indeed, classical predicting models for short-fiber composites cannot be applied.”
What the sources say
- Not checked — no full text of the sourcecites [71] Favier, 1995, Polymer nanocomposites reinforced by cellulose whiskers, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A claim is checked only against the cited paper’s full text, never its abstract, and none is available for its sources.
In the paper
“The DMA experiments demonstrated that the storage modulus of PU-MFC nanocomposites was improved over the whole temperature range compared to pure PU [136,137].”
What the sources say
- Not checked — no full text of the sourcecites [136] Seydibeyoglu, 2008, Novel nanocomposites based on polyurethane and micro fibrillated cellulose, Compos. Sci. Technol. source
- Not checked — no full text of the sourcecites [137] Wu, 2007, A high strength nanocomposite based on microcrystalline cellulose and polyurethane, Biomacromolecules source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“High efficiency was reached by this method that allowed esterification of cellulose nanoparticles to different extents with fatty acid chlorides.”
What the sources say
- Not checked — no full text of the sourcecites [129] Berlioz, 2009, Gas-phase surface esterification of cellulose microfibrils and whiskers, Biomacromolecules source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
108 more claims
Create a free account to see all 202 claims and to verify the 1 reference still open.
- Probably not a substantial claim. 61
- It may state two separate claims as one. 45
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
“This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.”
§ References
“150. Saxena, A.; Ragauskas, A.J. Water transmission barrier properties of biodegradable films based on cellulosic whiskers and xylan. Carbohyd. Polym. 2009 , 78 , 357-360.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ References
“23. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1296.”
§ References
“35. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1298.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 3.2. Thermal Properties
“However, when bacterial cellulose nanocrystals were modified with silane groups, Tm values were founded to increase with increasing filler content. According to the authors, this difference was due to stronger interactions between silylated whiskers and PVA matrix.”
§ 3.2. Thermal Properties
“Grunert et al. [43] in their work with cellulose acetate butyrate (CAB) reinforced with bacterial cellulose nanocrystals.”
Citations
Cites
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980 · cited 1×
“[61] gives a clear overview of such cellulosic nanomaterials.”
BackgroundComposites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696 · cited 5×
“The term ―natural fibers‖ is used to designate numerous kinds of fibers that are naturally produced by plants, animals and minerals [5].”
BackgroundInfluentialNishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676 · cited 1×
“Indeed lignocellulosic materials start to degrade near 220 °C restricting the type of matrix that can be used in association with natural fillers [22,101].”
BackgroundCellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493 · cited 2×
“In their study [86], individualized MFC was obtained by TEMPO-mediated oxidation at room temperature and stirring at 500 rpm.”
MethodJOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453 · cited 1×
“their ability to form hydrogen bonds play a major role in directing the crystalline packing and also governing the physical properties of cellulose [16].”
BackgroundAzizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Self-citationPääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796 · cited 1×
“[85,86] have proposed a new process to obtain MFC based on TEMPO reaction and strong mixing.”
MethodNatural Fibers, Biopolymers, and Biocomposites
(2005) · CRC Press eBooks · doi:10.1201/9780203508206 · Cited by 1,617
Research works printed but not linked: 9
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Nalwa, H.S. Encyclopedia of Nanoscience and Nanotechnology, American Scientific Publisher. [2nd ed.]. in press.
- Brännvall, E. (2007). Aspect on Strength Delivery and Higher Utilisation of Strength Potential of Soft Wood Kraft Pupl Fibres. [Ph.D. Thesis, KTH, Royal Institute of Technology].
- Kroschwitz, 2003, Cellulose, Encyclopedia of Polymler Science and Technology, Volume 5, 473
- Lu, 2008, Surface modification of microfibrillated cellulose for epoxy composite applications, Polymer, 49, 1285, 10.1016/j.polymer.2008.01.028 · DOI · Paper page
- Herrick, 1983, Microfibrillated cellulose: Morphology and accessibility, J. Appl. Polym. Sci. Appl. Polym. Symp., 37, 797
- Khademhosseini, 2006, Nanobiotechnology—Drug delivery and tissue engineering, Chem. Engin. Progress, 102, 38
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
Cited by
Items 201–300 of 1,323
Review of Nanocellulose Polymer Composite Characteristics and Challenges
Ng, H.-M., Sin, L. T., Bee, S., Tee, T.-T., & Rahmat, A. R. (2016) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2016.1233277 · Cited by 127
“7/(L/ d), indicating the percolation threshold is inversely proportional to the aspect ratio([27]).”
BackgroundInfluentialMattonai, M., Pawcenis, D., Seppia, S. D., Łojewska, J., & Ribechini, E. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.09.029 · Cited by 121
Fu, T., Montes, F. J., Suraneni, P., Youngblood, J. P., & Weiss, J. (2017) · Polymers · doi:10.3390/polym9090424 · Cited by 116
“Another review of the preparation, properties and applications of cellulose bio nanocomposites can be found in the literature [6].”
BackgroundFortunati, E., Yang, W., Luzi, F., Kenny, J. M., Torre, L., & Puglia, D. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.04.013 · Cited by 117
Fabrication and applications of cellulose nanoparticle‐based polymer composites
Pandey, J. K., Nakagaito, A. N., & Takagi, H. (2012) · Polymer Engineering and Science · doi:10.1002/pen.23242 · Cited by 115
Surface esterification of cellulose nanofibers by a simple organocatalytic methodology
Ramírez, J. A. Á., Suriano, C. J., Cerrutti, P., & Foresti, M. L. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.08.020 · Cited by 112
Reddy, K. O., Maheswari, C. U., Dhlamini, M. S., Mothudi, B. M., Zhang, J., Zhang, J., Rajini, N., & Rajulu, A. V. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.12.051 · Cited by 120
Asim, N., Badiei, M., Alghoul, M. A., Mohammad, M., Fudholi, A., Akhtaruzzaman, M., Amin, N., & Sopian, K. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b02661 · Cited by 117
Green One-Pot Synthesis of Surface Hydrophobized Cellulose Nanocrystals in Aqueous Medium
Yoo, Y., & Youngblood, J. P. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00781 · Cited by 112
Escárcega‐González, C. E., Garza-Cervantes, J. A., Rodríguez, A. V., & Morones‐Ramírez, J. R. (2018) · International Journal of Polymer Science · doi:10.1155/2018/7045852 · Cited by 106
“The hydroxyl groups have been described to be abundant in cellulose nanofibers and very important factor to explain physical properties of cellulose [113, 114].”
BackgroundAlashwal, B. Y., Bala, M. S., Gupta, A. K., Sharma, S., & Mishra, P. (2019) · Journal of King Saud University - Science · doi:10.1016/j.jksus.2019.03.006 · Cited by 118
“…increasing temperature are thesised bioplastics. properties of keratin-based bioplastic film blended with microcrystalline ttps://doi.org/10.1016/j.jksus.2019.03.006 greater than these of K-60, probably due to the higher cross-linking efficiency of cellulose upon heating (Siqueira et al., 2010).”
BackgroundInfluentialRatna, A. S., Ghosh, A., & Mukhopadhyay, S. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.133563 · Cited by 117
Isolation of cellulose nanofibrils from Triodia pungens via different mechanical methods
Amiralian, N., Annamalai, P. K., Memmott, P. C., & Martin, D. J. (2015) · Cellulose · doi:10.1007/s10570-015-0688-x · Cited by 104
Nanocellulose Hybrids with Metal Oxides Nanoparticles for Biomedical Applications
Oprea, M., & Panaitescu, D. M. (2020) · Molecules · doi:10.3390/molecules25184045 · Cited by 113
“To be used in some biomedical applications, the bacterial cellulose membrane should be disrupted by mechanical and/or chemical treatments to provide individual cellulose nanofibers [31] or freeze-dried to obtain 3D nanocellulose networks as foams or aerogels [2,30].”
BackgroundMethodInfluentialGontarek‐Castro, E., & Castro‐Muñoz, R. (2023) · Green Chemistry · doi:10.1039/d3gc03377e · Cited by 107
Bio-Based and Biodegradable Polymeric Materials for a Circular Economy
Oliver-Cuenca, V., Salaris, V., Muñoz-Gimena, P. F., Agüero, Á., Peltzer, M. A., Alcázar, V., Arrieta, M. P., Sempere‐Torregrosa, J., Pavón, C., Samper, M. D., et al. (2024) · Polymers · doi:10.3390/polym16213015 · Cited by 129
Nanocellulosic materials as bioinks for 3D bioprinting
Piras, C. C., Fernández‐Prieto, S., & Borggraeve, W. M. D. (2017) · Biomaterials Science · doi:10.1039/c7bm00510e · Cited by 110
García‐García, D., Balart, R., López, J., Ek, M., & Moriana, R. (2018) · Cellulose · doi:10.1007/s10570-018-1760-0 · Cited by 104
“Intramolecular and intermolecular hydrogen bonds are established between the cellulosic chains resulting in ordered/packed crystalline structures which are intercalated with amorphous regions in the fibril structure (Jiang and Hsieh 2013; Mariano et al. 2014; Sheltami et al. 2012; Siqueira et al. 2010).”
BackgroundResultAzammi, A. M. N., Ilyas, R. A., Sapuan, S. M., Ibrahim, R., Atikah, M. S. N., Asrofi, M., & Atiqah, A. (2020) · Elsevier eBooks · doi:10.1016/b978-0-08-102665-6.00003-0 · Cited by 147
Tan, C., Han, F., Zhang, S., Li, P., & Shang, N. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22189663 · Cited by 108
“[52] reported the structure of cellulosic fibers is composed of cellulose, lignin, and hemicellulose; ash and extractives are also present in varying amounts depending on their origin.”
BackgroundCarrasco, P. M., Montes, S., García, I., Borghei, M., Jiang, H., Odriozola, I., Cabañero, G., & Ruiz, V. (2014) · Carbon · doi:10.1016/j.carbon.2013.12.086 · Cited by 100
“resources, which has triggered rising interest during the past decade in these nanocellulose materials especially for nanoreinforcement and barrier property improvement in polymer matrices [18].”
BackgroundA Comparative Study of Fibrillated Fibers from Different Mechanical and Chemical Pulps
Lahtinen, P., Liukkonen, S., Pere, J., et al. (2014) · BioResources · doi:10.15376/biores.9.2.2115-2127 · Cited by 100
“Pulps produced from hardwood and softwood differ from each other with respect to their hemicellulose composition (Sjöström 1981; Laine et al. 1996).”
BackgroundOne-pot preparation of hydrophobic cellulose nanocrystals in an ionic liquid
Miao, J., Yu, Y., Jiang, Z., & Zhang, L. (2016) · Cellulose · doi:10.1007/s10570-016-0864-7 · Cited by 101
Food-Grade Colloidal Systems for the Delivery of Essential Oils
Fathi, M., Vinceković, M., Jurić, S., Viskić, M., Jambrak, A. R., & Donsì, F. (2019) · Food Reviews International · doi:10.1080/87559129.2019.1687514 · Cited by 108
Wang, H., He, J., Zhang, M., Tam, K. C., & Ni, P. (2015) · Polymer Chemistry · doi:10.1039/c5py00466g · Cited by 102
Adsorption of azo dyes on polymer materials
Panic, V., Seslija, S., Nesic, A., & Velickovic, S. (2013) · Hemijska industrija · doi:10.2298/hemind121203020p · Cited by 99
Transparent Cellulose/Technical Lignin Composite Films for Advanced Packaging
Guo, Y., Tian, D., Shen, F., Yang, G. Q., Long, L., He, J., Song, C. Y., Zhang, J., Zhu, Y., Huang, C., et al. (2019) · Polymers · doi:10.3390/polym11091455 · Cited by 101
“When cellulose is subjected to a dissolution-casting process, flexible transparent films with excellent barrier properties could be obtained, which are comparable to those of prevalent plastic packaging materials [5].”
BackgroundLignin Based Functional Additives for Natural Rubber
Barana, D., Orlandi, M. E., Zoia, L., Castellani, L., Hanel, T., Bolck, C. H., & Gosselink, R. J. A. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b02145 · Cited by 99
Mechanochemical Transformations of Biomass into Functional Materials
Hajiali, F., Jin, T., Yang, G., Santos, M., Lam, E., & Moores, A. (2022) · ChemSusChem · doi:10.1002/cssc.202102535 · Cited by 99
Ansari, M. M., Heo, Y., Do, K., Ghosh, M., & Son, Y. (2024) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2024.100529 · Cited by 140
Thiangtham, S., Runt, J. P., & Manuspiya, H. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.12.080 · Cited by 93
Zhang, Z., Sèbe, G., Wang, X., & Tam, K. C. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.10.094 · Cited by 93
Hernandez, C. C., Ferreira, F. F., & Rosa, D. D. S. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.03.085 · Cited by 98
Post-sulfonation of cellulose nanofibrils with a one-step reaction to improve dispersibility
Luo, J., Semenikhin, N., Chang, H., Moon, R. J., & Kumar, S. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.10.077 · Cited by 97
Boujemaoui, A., Sánchez, C. C., Engström, J., Bruce, C., Fogelström, L., Carlmark, A., & Malmström, E. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b09009 · Cited by 97
Yang, J., Wang, Y., Zhang, W., Li, M., Peng, F., & Bian, J. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.10.223 · Cited by 94
Missoum, K., Martoïa, F., Belgacem, M. N., & Bras, J. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.04.013 · Cited by 106
Self-citationEffect of Preparation Conditions on Cellulose from Oil Palm Empty Fruit Bunch Fiber
Ching, Y. C., & Ng, T. S. (2014) · BioResources · doi:10.15376/biores.9.4.6373-6385 · Cited by 100
“Various methods can be used to extract cellulose, such as grinding, cryocrushing, TEMPO-mediated oxidation, sulfuric acid hydrolysis, and enzyme-assisted hydrolysis (Habibi et al. 2010; Rosa et al. 2010; Siqueira et al. 2010; Chen et al. 2012).”
BackgroundMethodInfluentialTEMPO-Oxidized Nanofibrillated Cellulose as a High Density Carrier for Bioactive Molecules
Weishaupt, R., Siqueira, G. D. F., Schubert, M., Tingaut, P., Maniura‐Weber, K., Zimmermann, T., Thöny‐Meyer, L., Faccio, G., & Ihssen, J. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b01100 · Cited by 95
Self-citationTuning of polyurethane foam mechanical and thermal properties using ball-milled cellulose
Stanzione, M., Oliviero, M., Cocca, M., Errico, M. E., Gentile, G., Avella, M., Lavorgna, M., Buonocore, G. G., & Verdolotti, L. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115772 · Cited by 94
Nabipour, H., Nie, S., Wang, X., et al. (2019) · Cellulose · doi:10.1007/s10570-019-02860-9 · Cited by 92
Nanocellulose from agro-waste: a comprehensive review of extraction methods and applications
Padhi, S., Singh, A., & Routray, W. (2023) · Reviews in Environmental Science and Bio/Technology · doi:10.1007/s11157-023-09643-6 · Cited by 107
Green synthesis of cellulose nanofibers using immobilized cellulase
Yassin, M. A., Gad, A. A. M., Ghanem, A. F. M., & Rehim, M. H. A. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.10.040 · Cited by 91
Mechanical properties of cellulose‐based multiscale composites: A review
Ganapathy, V., Gunasegeran, M., Sudhagar, P. E., Rashedi, A., Norrrahim, M. N. F., Ilyas, R. A., Goh, K. L., Jawaid, M., & Naveen, J. (2022) · Polymer Composites · doi:10.1002/pc.27175 · Cited by 96
Cellulose nanocrystal/PVA nanocomposite membranes for CO2/CH4 separation at high pressure
Jahan, Z., Niazi, M. B. K., Hägg, M., et al. (2018) · Journal of Membrane Science · doi:10.1016/j.memsci.2018.02.061 · Cited by 89
Cellulose based materials to accelerate the transition towards sustainability
Verma, J., Petrů, M., & Goel, S. (2024) · Industrial Crops and Products · doi:10.1016/j.indcrop.2024.118078 · Cited by 105
A review of cellulose nanocrystals and nanocomposites
Ramires, E. C., & Dufresne, A. (2011) · TAPPI Journal · doi:10.32964/tj10.4.9 · Cited by 96
Self-citationGender differences in murine pulmonary responses elicited by cellulose nanocrystals
Shvedova, A. A., Kisin, E. R., Yanamala, N. V. K., Farcas, M. T., Menas, A. L., Williams, A., Fournier, P. M., Reynolds, J. S., Gutkin, D. W., Star, A., et al. (2015) · Particle and Fibre Toxicology · doi:10.1186/s12989-016-0140-x · Cited by 92
Hasanin, M. S., Mostafa, A. M., Mwafy, E. A., et al. (2018) · Environmental Nanotechnology Monitoring & Management · doi:10.1016/j.enmm.2018.10.004 · Cited by 88
Nanocellulose for Sensing Applications
Nguyen, L. H., Naficy, S., Chandrawati, R., & Dehghani, F. (2019) · Advanced Materials Interfaces · doi:10.1002/admi.201900424 · Cited by 91
Hybrid Supramolecular and Colloidal Hydrogels that Bridge Multiple Length Scales
Janeček, E., McKee, J. R., Tan, C. S. Y., Nykänen, A., Kettunen, M., Laine, J., Ikkala, O. T., & Scherman, O. A. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410570 · Cited by 91
Jamwal, N., Sodhi, R. K., Gupta, P., & Paul, S. (2011) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2011.08.013 · Cited by 85
Sajab, M. S., Chia, C. H., Chan, C. H., Zakaria, S., Kaco, H., Chook, S. W., Chin, S. X., & Noor, A. M. (2016) · RSC Advances · doi:10.1039/c5ra26193g · Cited by 86
Lavoine, N., Guillard, V., Desloges, I., et al. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.04.048 · Cited by 86
Self-citationMissoum, K., Bras, J., & Belgacem, M. N. (2012) · Cellulose · doi:10.1007/s10570-012-9780-7 · Cited by 98
“Different pretreatment such as enzymatic (Pääkkö et al. 2007; Siqueira et al. 2010d; Syverud et al. 2011) or TEMPO mediated process (Saito and Isogai 2004; Saito et al. 2007; Isogai et al. 2011), have nowadays been developed to obtain more homogeneous suspension and limit energy consumption.”
InfluentialSelf-citationYaich, A. I., Edlund, U., & Albertsson, A. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00841 · Cited by 90
Freeze–Thaw Gelation of Cellulose Nanocrystals
Lewis, L., Hatzikiriakos, S. G., Hamad, W. Y., & MacLachlan, M. J. (2019) · ACS Macro Letters · doi:10.1021/acsmacrolett.9b00140 · Cited by 84
Nanofibrillated cellulose surface grafting in ionic liquid
Missoum, K., Belgacem, M. N., Barnes, J., Brochier-Salon, M.-C., & Bras, J. (2012) · Soft Matter · doi:10.1039/c2sm25691f · Cited by 93
Self-citationMaalihan, R. D., Domalanta, M. R. B., Corrales, A. C. C., & Caldona, E. B. (2024) · Polymer Composites · doi:10.1002/pc.29358 · Cited by 97
“6,59 Similarly, mineral fillers often contain inorganic oxide linkages, such as siloxane, FIGURE 2 Filler surface functionalization techniques relevant to polymer composite coatings: (A) AP-DBD treatment of CNC powder.”
Peng, Y., Gallegos, S. A., Gardner, D. J., Han, Y., & Cai, Z. (2014) · Polymer Composites · doi:10.1002/pc.23235 · Cited by 85
Gicquel, E., Martin, C., Yanez, J. G., & Bras, J. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-0589-x · Cited by 88
“[9] Siqueira G, Bras J, Dufresne A (2010) Cellulosic bio-”
BackgroundSelf-citationThe thermal stability of nanocellulose and its acetates with different degree of polymerization
Agustin, M. B., Nakatsubo, F., & Yano, H. (2015) · Cellulose · doi:10.1007/s10570-015-0813-x · Cited by 78
“Intensive and informative reviews on the application of nanocelluloses as reinforcing fillers have also been published (Eichhorn et al. 2009; Siqueira et al. 2010; Klemm et al. 2011; Abdul Khalil et al. 2012; Brinchi et al. 2013).”
BackgroundEvaluation of different methods for extraction of nanocellulose from yerba mate residues
Júnior, M. A. D., Borsoi, C., Hansen, B., & Catto, A. L. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.04.064 · Cited by 91
The Use of Nanocellulose in Edible Coatings for the Preservation of Perishable Fruits and Vegetables
Pirozzi, A., Ferrari, G., & Donsì, F. (2021) · Coatings · doi:10.3390/coatings11080990 · Cited by 91
Shrestha, S., A., J. A. D., Ghanbari, S., & Youngblood, J. P. (2017) · Biomacromolecules · doi:10.1021/acs.biomac.7b00026 · Cited by 86
Nascimento, S. A., & de Rezende, C. A. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.09.099 · Cited by 89
Stepanova, M., & Korzhikova‐Vlakh, E. (2022) · Polymers · doi:10.3390/polym14071477 · Cited by 91
“More details about the different forms of cellulose can be found elsewhere [49,51,55,58,59].”
BackgroundInfluentialAn overview on the cellulose based conducting composites
Pandey, J. K., Takagi, H., Nakagaito, A. N., Saini, D. R., & Ahn, S. (2012) · Composites Part B Engineering · doi:10.1016/j.compositesb.2012.04.045 · Cited by 82
Peng, Y., & Gardner, D. J. (2012) · Wood and Fiber Science (Society of Wood Science and Technology) · Cited by 78
Lavoine, N., Givord, C., Tabary, N., Desloges, I., Martel, B., & Bras, J. (2014) · Innovative Food Science & Emerging Technologies · doi:10.1016/j.ifset.2014.06.006 · Cited by 91
Self-citationGicquel, E., Bras, J., Rey, C., Putaux, J., Pignon, F., Jean, B., & Martin, C. (2019) · Cellulose · doi:10.1007/s10570-019-02622-7 · Cited by 88
“…et al., 2017) such as the biomedical domain (Jorfi and Foster, 2015; Lin and Dufresne, 2014; Sunasee et al., 2016), environmentally friendly nanocomposites (Mariano et al., 2014; Oksman et al., 2014; Siqueira et al., 2010) or the paper coating industry (Gicquel et al., 2017; Hoeng et al., 2017).”
Self-citationDervisevic, M., Dervisevic, E., & Şenel, M. (2019) · Microchimica Acta · doi:10.1007/s00604-019-3842-6 · Cited by 80
Nahrawy, A. M. E., Hammad, A. B. A., Khattab, T. A., Haroun, A. A., & Kamel, S. M. (2020) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2020.104533 · Cited by 81
Tahir, D., Karim, M. R. A., Hu, H., Naseem, S., Rehan, M., Ahmad, M., & Zhang, M. (2022) · Polymers · doi:10.3390/polym14214468 · Cited by 90
Flexible Mesoporous Photonic Resins with Tunable Chiral Nematic Structures
Khan, M. K., Giese, M., Yu, M., Kelly, J. A., Hamad, W. Y., & MacLachlan, M. J. (2013) · Angewandte Chemie · doi:10.1002/ange.201303829 · Cited by 80
Idumah, C. I., & Hassan, A. (2016) · Reviews in Chemical Engineering · doi:10.1515/revce-2015-0046 · Cited by 92
“This reveals advancement in flexible electronics, thereby positioning nanocellulose as a supportive material or coating for flexible packages (Siqueira et al. 2010).”
Fabrication and Properties of Polyethylene/Cellulose Nanocrystal Composites
Sapkota, J., Natterodt, J. C., Shirole, A., Foster, E. J., & Weder, C. (2016) · Macromolecular Materials and Engineering · doi:10.1002/mame.201600300 · Cited by 82
Pereira, P., Ornaghi, H. L., Coutinho, L. V., Duchemin, B., & Cioffi, M. O. H. (2020) · Cellulose · doi:10.1007/s10570-020-03179-6 · Cited by 79
Cellulose nanofibers and composites: An insight into basics and biomedical applications
Surendran, G., & Sherje, A. P. (2022) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2022.103601 · Cited by 81
Srithep, Y., Turng, L., Sabo, R. C., & Clemons, C. C. (2012) · Cellulose · doi:10.1007/s10570-012-9726-0 · Cited by 86
“…attention as a reinforcing filler in thermoplastic matrices due to its numerous advanta ges, which include low density, renewability, high specific properties, biodegradability, gas barrier prop erties, and unlimited availability (Siqueira et al. 2010; Dufresne et al. 1997; Jonoobi et al. 2010).”
BackgroundInfluentialMontes, S., Carrasco, P. M., Ruiz, V., et al. (2015) · Composites Science and Technology · doi:10.1016/j.compscitech.2015.05.018 · Cited by 78
Bansal, M., Chauhan, G. S., Kaushik, A., & Sharma, A. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.06.045 · Cited by 81
Martins, B. F., Toledo, P. V. O., & Petri, D. F. S. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.08.082 · Cited by 80
Qasim, U., Ali, Z., Nazir, M. S., Hassan, S. U., Rafiq, S., Jamil, F., Al-Muhtaseb, A. H., Ali, M., Niazi, M. B. K., Ahmad, N. M., et al. (2020) · Advances in Polymer Technology · doi:10.1155/2020/9765950 · Cited by 84
Jose, J., Pai, A. R., Gopakumar, D. A., Dalvi, Y. B., Ruby, V., Bhat, S. G., Pasquini, D., Kalarikkal, N., & Thomas, S. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119338 · Cited by 75
From elastomeric to rigid polyurethane/cellulose nanocrystal bionanocomposites
Saralegi, A., Rueda, L., Martin, L., Arbelaiz, A., Eceiza, A., & Corcuera, M. Á. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.08.025 · Cited by 82
Cunha, A. G., Zhou, Q., Larsson, P. T., & Berglund, L. A. (2014) · Cellulose · doi:10.1007/s10570-014-0334-z · Cited by 81
“Cellulose has good mechanical properties and many forms of cellulose fibers are used as reinforcement in composite materials (Belgacem and Gandini 2005; Berglund and Peijs 2010; Hubbe et al. 2008; Siqueira et al. 2010).”
BackgroundSonia, A., & Dasan, K. P. (2013) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2013.03.020 · Cited by 83
Floros, M. C., Hojabri, L., Abraham, E., Jose, J., Thomas, S., Pothan, L. A., Leão, A. L., & Narine, S. S. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.02.016 · Cited by 79
Sèbe, G., Ham-Pichavant, F., & Pécastaings, G. (2013) · Biomacromolecules · doi:10.1021/bm400854n · Cited by 82
dos Santos, F. A., Iulianelli, G. C. V., & Tavares, M. I. B. (2016) · Materials Sciences and Applications · doi:10.4236/msa.2016.75026 · Cited by 113
Veeramachineni, A. K., Sathasivam, T., Muniyandy, S., Pushpamalar, J., Langford, S. J., & Yan, L. (2016) · Applied Sciences · doi:10.3390/app6060170 · Cited by 76
“The use of natural raw materials for the synthesis of polymers and polymer-based products has been one of the most vital innovations in recent years [1–5].”
BackgroundVenturi, D., Grupkovic, D., Sisti, L., & Baschetti, M. G. (2017) · Journal of Membrane Science · doi:10.1016/j.memsci.2017.11.021 · Cited by 78
CO2-Switchable Cellulose Nanocrystal Hydrogels
Oechsle, A. L., Lewis, L., Hamad, W. Y., Hatzikiriakos, S. G., & MacLachlan, M. J. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b03939 · Cited by 85
Cellulose nanofibrils extracted from the byproduct of cotton plant
Miao, X., Lin, J., Tian, F., Li, X., Bian, F., & Wang, J. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.09.056 · Cited by 76
Liu, J., Korpinen, R. I., Mikkonen, K. S., Willför, S. M., & Xu, C. (2014) · Cellulose · doi:10.1007/s10570-014-0321-4 · Cited by 82
“…such as nanofibrillated cellulose (NFC), the surface charge, surface energy, specific area, crystalline structure and size and some other properties are sometimes significantly different from those of the bulk materials, and thus offer promising application opportunities (Siqueira et al. 2010).”
BackgroundBioplastics from agro-wastes for food packaging applications
de Moura, I. G., de Sá, A. V., Abreu, A. S. L. M., & Machado, A. V. A. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-804302-8.00007-8 · Cited by 90
An Overview of the Antimicrobial Properties of Lignocellulosic Materials
Lobo, F. C. M., Franco, A. R., Fernandes, E. M., & Reis, R. L. (2021) · Molecules · doi:10.3390/molecules26061749 · Cited by 79
“niger [41] e str ct re f t is aterial is r a ize as icr fi rils, it a ia eter et ee 2 an 20 n , connect together to for cell lose fibers [17,22].”
BackgroundMalucelli, L. C., Lacerda, L. G., Dziedzic, M., & Filho, M. A. D. S. C. (2017) · Reviews in Environmental Science and Bio/Technology · doi:10.1007/s11157-017-9423-4 · Cited by 82
“The incorporation of CNCs as nanocomposites should enhance this property because of their inherent characteristic of heat resistance and it also helps to avoid polymeric material decomposition at higher temperatures (Sehaqui et al. 2011; Siqueira et al. 2010a; Sun et al. 2004).”
BackgroundMethodInfluentialNanocellulose for oil and gas field drilling and cementing applications
Ramasamy, J., & Amanullah, M. (2019) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2019.106292 · Cited by 79
Metadata
- Authors
- Siqueira, G., Bras, J., & Dufresne, A.
- Affiliations
- Institut polytechnique de Grenoble (FR)
- Corresponding author
- Dufresne, Alain
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2010-12-13
- Volume
- 2
- Issue
- 4
- Pages
- 728-765
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W1980921765
- Semantic Scholar
- 88e39e80ebe121f79b7f4d6157891419553dc112
- Cited by
- 1,328
- References
- 151
- Citations by year
- 2026: 44 · 2025: 59 · 2024: 69 · 2023: 89 · 2022: 91 · 2021: 111 · 2020: 83 · 2019: 111 · 2018: 101 · 2017: 118 · 2016: 102 · 2015: 113 · 2014: 117 · 2013: 59 · 2012: 41
- FWCI
- 15.68
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- cellulose nanocrystals, microfibrillated cellulose, cellulose nanoparticles, biocomposites, mechanical properties, barrier properties, packaging materials, emulsion processing, natural fibers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-07, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-07 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.