Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Open accessThe DOI matches its Crossref record; 147 of the 151 references it cites were found in a registry or an index; 5 of the 201 sources its claims cite were checked for support.
Abstract
Cellulose is the most abundant biomass material in nature. Extracted from natural fibers, its hierarchical and multi-level organization allows different kinds of nanoscaled cellulosic fillers—called cellulose nanocrystals or microfibrillated cellulose (MFC)—to be obtained. Recently, such cellulose nanoparticles have been the focus of an exponentially increasing number of works or reviews devoted to understanding such materials and their applications. Major studies over the last decades have shown that cellulose nanoparticles could be used as fillers to improve mechanical and barrier properties of biocomposites. Their use for industrial packaging is being investigated, with continuous studies to find innovative solutions for efficient and sustainable systems. Processing is more and more important and different systems are detailed in this paper depending on the polymer solubility, i.e., (i) hydrosoluble systems, (ii) non-hydrosoluble systems, and (iii) emulsion systems. This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.
Overview
CoChat Summary
TL;DR
This review summarizes preparation, properties, and applications of cellulosic bionanocomposites reinforced with cellulose nanocrystals/whiskers and microfibrillated cellulose (MFC). It reports that these nanofillers can strongly improve mechanical and barrier properties, often via a percolating hydrogen-bonded network, while processing and industrial scale-up remain challenging.
Key findings
- Cellulose nanoparticles act as effective reinforcing fillers; the strong effect is generally attributed to formation of a percolating network above the percolation threshold from hydrogen bonding between nanoparticles.
- Mechanical examples include poly(S-co-BuA) latex with 30 wt% wheat straw cellulose whiskers showing a rubbery Young’s modulus more than 1000-times higher than the bulk matrix; 10 wt% cellulose palm tree whiskers in natural rubber decreased strain at break from 575% to 16%; 5 wt% MFC improved PU modulus by approximately 200% at 5 °C and close to 500% at 85 °C; and PLA-MFC modulus increased from 5 GPa at 10 wt% MFC to almost 9 GPa at 70 wt% MFC.
- Barrier properties can improve: pure MFC films had oxygen transmission rate values of 17.0 and 17.8 mL m⁻² day⁻¹; MFC coating on PLA decreased OTR from 746 to 1 mL m⁻² day⁻¹ Pa⁻¹; and 10 wt% sulfonated whiskers in xylan/sorbitol films decreased WVTR from 304 to 174 g h⁻¹ m⁻².
- Thermal behavior varies: several studies found no important Tg changes with cellulose nanofillers, while moisture, plasticization, and filler content can alter Tg and crystallinity depending on the system.
Methods
- Narrative review of cellulose nanoparticles (whiskers/nanocrystals and MFC), their preparation, characterization, properties, and applications, citing more than 150 references.
- Describes processing routes classified by polymer solubility: hydrosoluble systems, emulsion systems, and non-hydrosoluble systems, plus solvent casting, extrusion, surfactant coating, and surface chemical modification/grafting.
- No new experimental data are generated; the paper synthesizes selected published works and cites SciFinder literature trends, e.g., papers on “cellulose and nano” increased from 57 in 2000 to more than 700 in 2009.
Limitations
- The paper states that toxicity is not discussed because of “a lot of uncertainty,” that practical transition from laboratory to industrial scale is not simple and requires chemical engineering to reduce nanoparticle production costs, and that inconsistent terminology for cellulose nanoparticles causes misunderstanding and ambiguity.
- Evident from the text: as a narrative review, it summarizes “some selected works” rather than using a described systematic search or inclusion criteria, and it does not perform quantitative meta-analysis.
- Evident from the text: many property claims are drawn from cited studies rather than independently verified here, and the review notes limited reported use of cellulose nanocrystals for barrier properties and possible porosity in nanocomposite films reducing MFC efficiency.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
5 Valid · 6 Not valid · 149 Not checked · 42 Own results and interpretations
In the paper
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers. This result was surprising due to the high specific area of such nanofillers, e.g., around 170 m 2 g -1 for tunicin whiskers [139].”
- Also stated in: § 3.2. Thermal Properties · plain
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers.”
What the sources say
- Not checked — no full text of the sourcecites [139] Angles, 2000, Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 3.2. Thermal Properties · plain
In the paper
“However, it seems that, at least under the conditions presented in this work, the cellulose chemical modification via grafting-from technique changes partially the cellulose crystallinity.”
What the sources say
- Not checked — no full text of the sourcecites [44] Morandi, 2009, Cellulose nanocrystals grafted with polystyrene chains through surface-initiated atom transfer radical polymerization (SI-ATRP), Langmuir source
hedgedstates a possible causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“Indeed, classical predicting models for short-fiber composites cannot be applied.”
What the sources say
- Not checked — no full text of the sourcecites [71] Favier, 1995, Polymer nanocomposites reinforced by cellulose whiskers, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A claim is checked only against the cited paper’s full text, never its abstract, and none is available for its sources.
In the paper
“The DMA experiments demonstrated that the storage modulus of PU-MFC nanocomposites was improved over the whole temperature range compared to pure PU [136,137].”
What the sources say
- Not checked — no full text of the sourcecites [136] Seydibeyoglu, 2008, Novel nanocomposites based on polyurethane and micro fibrillated cellulose, Compos. Sci. Technol. source
- Not checked — no full text of the sourcecites [137] Wu, 2007, A high strength nanocomposite based on microcrystalline cellulose and polyurethane, Biomacromolecules source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“High efficiency was reached by this method that allowed esterification of cellulose nanoparticles to different extents with fatty acid chlorides.”
What the sources say
- Not checked — no full text of the sourcecites [129] Berlioz, 2009, Gas-phase surface esterification of cellulose microfibrils and whiskers, Biomacromolecules source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
108 more claims
Create a free account to see all 202 claims and to verify the 1 reference still open.
- Probably not a substantial claim. 61
- It may state two separate claims as one. 45
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
“This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.”
§ References
“150. Saxena, A.; Ragauskas, A.J. Water transmission barrier properties of biodegradable films based on cellulosic whiskers and xylan. Carbohyd. Polym. 2009 , 78 , 357-360.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ References
“23. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1296.”
§ References
“35. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1298.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 3.2. Thermal Properties
“However, when bacterial cellulose nanocrystals were modified with silane groups, Tm values were founded to increase with increasing filler content. According to the authors, this difference was due to stronger interactions between silylated whiskers and PVA matrix.”
§ 3.2. Thermal Properties
“Grunert et al. [43] in their work with cellulose acetate butyrate (CAB) reinforced with bacterial cellulose nanocrystals.”
Citations
Cites
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980 · cited 1×
“[61] gives a clear overview of such cellulosic nanomaterials.”
BackgroundComposites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696 · cited 5×
“The term ―natural fibers‖ is used to designate numerous kinds of fibers that are naturally produced by plants, animals and minerals [5].”
BackgroundInfluentialNishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676 · cited 1×
“Indeed lignocellulosic materials start to degrade near 220 °C restricting the type of matrix that can be used in association with natural fillers [22,101].”
BackgroundCellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493 · cited 2×
“In their study [86], individualized MFC was obtained by TEMPO-mediated oxidation at room temperature and stirring at 500 rpm.”
MethodJOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453 · cited 1×
“their ability to form hydrogen bonds play a major role in directing the crystalline packing and also governing the physical properties of cellulose [16].”
BackgroundAzizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Self-citationPääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796 · cited 1×
“[85,86] have proposed a new process to obtain MFC based on TEMPO reaction and strong mixing.”
MethodNatural Fibers, Biopolymers, and Biocomposites
(2005) · CRC Press eBooks · doi:10.1201/9780203508206 · Cited by 1,617
Research works printed but not linked: 9
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Nalwa, H.S. Encyclopedia of Nanoscience and Nanotechnology, American Scientific Publisher. [2nd ed.]. in press.
- Brännvall, E. (2007). Aspect on Strength Delivery and Higher Utilisation of Strength Potential of Soft Wood Kraft Pupl Fibres. [Ph.D. Thesis, KTH, Royal Institute of Technology].
- Kroschwitz, 2003, Cellulose, Encyclopedia of Polymler Science and Technology, Volume 5, 473
- Lu, 2008, Surface modification of microfibrillated cellulose for epoxy composite applications, Polymer, 49, 1285, 10.1016/j.polymer.2008.01.028 · DOI · Paper page
- Herrick, 1983, Microfibrillated cellulose: Morphology and accessibility, J. Appl. Polym. Sci. Appl. Polym. Symp., 37, 797
- Khademhosseini, 2006, Nanobiotechnology—Drug delivery and tissue engineering, Chem. Engin. Progress, 102, 38
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
Cited by
Items 101–200 of 1,323
Wang, C., Gao, X., Chen, Z., Chen, Y., & Chen, H. (2017) · Polymers · doi:10.3390/polym9120689 · Cited by 183
“According to the Food and Agriculture Organization (FAO, QC, Canada), around 35 million tons of natural fibers are harvested each year, which are a fundamental resource that can be used to produce biopolymers [9,10].”
BackgroundNanocrystalline cellulose reinforced PVDF-HFP membranes for membrane distillation application
Lalia, B. S., Guillen, E., Arafat, H. A., & Hashaikeh, R. (2014) · Desalination · doi:10.1016/j.desal.2013.10.030 · Cited by 181
Liu, H., He, H., Peng, X., Huang, B., & Li, J. (2019) · Polymers for Advanced Technologies · doi:10.1002/pat.4524 · Cited by 180
Solala, I., Iglesias, M. C., & Peresin, M. S. (2020) · Cellulose · doi:10.1007/s10570-019-02899-8 · Cited by 178
Subcritical Water: A Method for Green Production of Cellulose Nanocrystals
Novo, L. P., Bras, J., García, A., Belgacem, N., & Curvelo, A. A. S. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00762 · Cited by 177
Self-citationWaste paper: An underutilized but promising source for nanocellulose mining
Kumar, V., Pathak, P., & Bhardwaj, N. K. (2020) · Waste Management · doi:10.1016/j.wasman.2019.10.041 · Cited by 175
Present Status and Future Prospects of Jute in Nanotechnology: A Review
Shah, S. S., Shaikh, M. N., Khan, M. Y., Alfasane, M. A., Rahman, M. M., & Aziz, M. A. (2021) · The Chemical Record · doi:10.1002/tcr.202100135 · Cited by 177
Polylactide cellulose-based nanocomposites
Vatansever, E., Arslan, D., & Nofar, M. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.06.205 · Cited by 173
Synthesis and characterization of cotton fiber-based nanocellulose
Theivasanthi, T., Anne Christma, F. L., Toyin, A. J., Gopinath, S. C. B., & Ravichandran, R. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.11.054 · Cited by 173
Kian, L. K., Saba, N., Jawaid, M., & Sultan, M. T. H. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.09.040 · Cited by 174
Current international research into cellulose as a functional nanomaterial for advanced applications
Eichhorn, S. J., Etale, A., Wang, J., Berglund, L. A., Li, Y., Cai, Y., Chen, C., Cranston, E. D., Johns, M. A., Fang, Z., et al. (2022) · Journal of Materials Science · doi:10.1007/s10853-022-06903-8 · Cited by 171
“Despite many advantages, nanocellulose also has some limitations—namely, moisture sensitivity and low thermal stability [172].”
BackgroundCellulose nanocrystals extracted from okra fibers in PVA nanocomposites
Fortunati, E., Puglia, D., Monti, M., Santulli, C., Maniruzzaman, M., & Kenny, J. M. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.38524 · Cited by 169
Green Approaches To Engineer Tough Biobased Epoxies: A Review
Mashouf Roudsari, G., Mohanty, A. K., & Misra, M. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01422 · Cited by 167
Septevani, A. A., Evans, D. A. C., Annamalai, P. K., & Martin, D. J. (2017) · Industrial Crops and Products · doi:10.1016/j.indcrop.2017.05.039 · Cited by 167
Balea, A., Fuente, E., Monte, M. C., Merayo, N., Campano, C., Negro, C., & Blanco, A. (2020) · Molecules · doi:10.3390/molecules25030526 · Cited by 167
Flexible Mesoporous Photonic Resins with Tunable Chiral Nematic Structures
Khan, M. K., Giese, M., Yu, M., Kelly, J. A., Hamad, W. Y., & MacLachlan, M. J. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201303829 · Cited by 166
Costa, A. L. R., Gomes, A., Tibolla, H., Menegalli, F. C., & Cunha, R. L. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.04.001 · Cited by 166
A comprehensive review on fused deposition modelling of polylactic acid
Sandanamsamy, L., Harun, W. S. W., Ishak, I., Romlay, F. R. M., Kadirgama, K., Ramasamy, D., Idris, S. R. A., & Tsumori, F. (2023) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00356-w · Cited by 167
HPMC reinforced with different cellulose nano-particles
Bilbao-Sainz, C., Bras, J., Williams, T., Sénechal, T., & Orts, W. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.06.060 · Cited by 164
Self-citationMylsamy, B., Shanmugam, S. K. M., Aruchamy, K., Palanisamy, S., Nagarajan, R., & Ayrilmis, N. (2024) · Polymer Engineering & Science · doi:10.1002/pen.26713 · Cited by 166
Li, Q., Wang, Y., Wu, Y., He, K., Li, Y., Luo, X., Li, B., Wang, C., & Liu, S. (2019) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2018.09.039 · Cited by 163
Carboxymethylated nanofibrillated cellulose: rheological studies
Naderi, A., Lindström, T., & Sundström, J. (2014) · Cellulose · doi:10.1007/s10570-014-0192-8 · Cited by 158
“The reader is referred to some of the many reviews and books (Lucian and Rojas 2009; Eichhorn et al. 2010; Siquiera et al. 2010; Klemm et al. 2011; Isogai et al. 2011; Siro and Plackett 2010; Moon et al. 2011; Lindström et al. 2014) on the subject of nanocellulosic materials.”
Nanocelluloses: Natural-Based Materials for Fiber-Reinforced Cement Composites. A Critical Review
Balea, A., Fuente, E., Blanco, A., & Negro, C. (2019) · Polymers · doi:10.3390/polym11030518 · Cited by 160
Starch/PVA-based nanocomposites reinforced with bamboo nanofibrils
Guimarães, M., Botaro, V. R., Novack, K. M., Teixeira, F. G., & Tonoli, G. H. D. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.03.014 · Cited by 159
“…including drugs (Villanova et al., 2011), dietary food (Okiyama et al., 1993), special papers (Nguyen and Tan, 2009), reinforcement in packaging/films (Siro and Plackett, 2010; Syverud et al., 2011) and polymeric matrices (Orts et al., 2005; Azizi Samir et al., 2005; Siqueira et al., 2010).”
BackgroundHenrique, M. A., Flauzino Neto, W. P., Silvério, H. A., Martins, D. F., Gurgel, L. V. A., Barud, H. D. S., Morais, L. C. D., & Pasquini, D. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.06.048 · Cited by 158
Nuruddin, M., Hosur, M. V., Uddin, M., Baah, D. A., & Jeelani, S. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42990 · Cited by 163
Dagnon, K. L., Shanmuganathan, K., Weder, C., & Rowan, S. J. (2012) · Macromolecules · doi:10.1021/ma300463y · Cited by 168
Hairy cellulose nanocrystalloids: a novel class of nanocellulose
van de Ven, T. G. M., & Sheikhi, A. (2016) · Nanoscale · doi:10.1039/c6nr01570k · Cited by 169
General scenarios of cellulose and its use in the biomedical field
Gopi, S., Balakrishnan, P., Divya, C., Poovathankandy, D., & Thomas, S. (2019) · Materials Today Chemistry · doi:10.1016/j.mtchem.2019.04.012 · Cited by 172
Water-Resistant, Transparent Hybrid Nanopaper by Physical Cross-Linking with Chitosan
Toivonen, M. S., Kurki-Suonio, S., Schacher, F. H., Hietala, S., Rojas, O. J., & Ikkala, O. T. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00145 · Cited by 163
Use of nanofillers in wood coatings: a scientific review
Nikolic, M., Lawther, M., & Sanadi, A. R. (2015) · Journal of Coatings Technology and Research · doi:10.1007/s11998-015-9659-2 · Cited by 148
“Semicrystalline nanofibrillated cellulose (NFC) is usually obtained through mechanical shearing in high pressure homogenizers, while nanocellulose crystals (NCC), which are often also called cellulose whiskers, are commonly made by acid hydrolysis with sulfuric acid which removes the amorphous regions.(100) Substantia…”
BackgroundCellulose nanocrystals from rice and oat husks and their application in aerogels for food packaging
de Oliveira, J. P., Bruni, G. P., Halal, S. L. M. E., Bertoldi, F. C., Dias, Á. R. G., & Zavareze, E. D. R. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.11.205 · Cited by 155
“The high crystallinity of cellulose nanocrystals is based on the chemical structure of cellulose, which has the ability to form intermolecular links within the hydrogen between the cellulose chains, allowing packaging of the crystalline cellulose chains in a highly compact system (crystalline structures) [37].”
BackgroundLi, Q., Wu, Y., Fang, R., et al. (2021) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2021.02.027 · Cited by 149
A Review on Grafting of Biofibers for Biocomposites
Wei, L., & McDonald, A. G. (2016) · Materials · doi:10.3390/ma9040303 · Cited by 158
“3 [19] Bamboo 34.”
Asyraf, M. R. M., Rafidah, M., Azrina, A., & Razman, M. R. (2021) · Cellulose · doi:10.1007/s10570-021-03710-3 · Cited by 162
“The kenaf fibre can reinforce any polymeric matrix via numerous methods, including pultrusion, hand lay-up, hot compression and filament winding (Eichhorn et al. 2001; Siqueira et al. 2010; Saba et al. 2015a).”
BackgroundBacterial cellulose films: influence of bacterial strain and drying route on film properties
Zeng, M., Laromaine, A., & Roig, A. (2014) · Cellulose · doi:10.1007/s10570-014-0408-y · Cited by 170
Foroughi, F., Ghomi, E. R., Dehaghi, F. M., Borayek, R., & Ramakrishna, S. (2021) · Materials · doi:10.3390/ma14040714 · Cited by 171
“It is clear that due to having three hydroxyl groups in the monomer structure, the formation of hydrogen bonds has a noticeable influence on directing the crystalline regions and, as a result, controlling the physical properties [19,20].”
BackgroundExtraction of Cellulose Nanocrystals from Phormium tenax Fibres
Fortunati, E., Puglia, D., Monti, M., Peponi, L., Santulli, C., Kenny, J. M., & Torre, L. (2012) · Journal of Polymers and the Environment · doi:10.1007/s10924-012-0543-1 · Cited by 150
Functionalized cellulose nanocrystals as reinforcement in biodegradable polymer nanocomposites
Ferreira, F. V., Pinheiro, I. F., Gouveia, R. F., Thim, G. P., & Lona, L. M. F. (2017) · Polymer Composites · doi:10.1002/pc.24583 · Cited by 159
Sugar Palm Starch-Based Composites for Packaging Applications
Sanyang, M. L., Ilyas, R. A., Sapuan, S. M., & Jumaidin, R. (2017) · Springer eBooks · doi:10.1007/978-3-319-67319-6_7 · Cited by 182
Preparation of different polymorphs of cellulose from different acid hydrolysis medium
Mahmud, M. M., Perveen, A., Jahan, R. A., Matin, M. A., Wong, S. Y., Xu, L., & Arafat, M. T. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.03.027 · Cited by 149
A Jatropha biomass as renewable materials for biocomposites and its applications
Khalil, H. P. S. A., Aprilia, N. A. S., Bhat, A. H., Jawaid, M., Tahir, P. M., & Dungani, R. (2013) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.12.036 · Cited by 155
Effect of ball milling on the production of nanocellulose using mild acid hydrolysis method
Phanthong, P., Guan, G., Ma, Y., Hao, X., & Abudula, A. (2015) · Journal of the Taiwan Institute of Chemical Engineers · doi:10.1016/j.jtice.2015.11.001 · Cited by 146
Dasan, Y. K., Bhat, A. H., & Ahmad, F. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.11.012 · Cited by 145
Polysaccharides for tissue engineering: Current landscape and future prospects
Tchobanian, A., Oosterwyck, H. V., & Fardim, P. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.10.039 · Cited by 152
Enhanced dispersion of cellulose nanocrystals in melt-processed polylactide-based nanocomposites
Arias, A., Heuzey, M., Huneault, M. A., Ausias, G., & Bendahou, A. (2014) · Cellulose · doi:10.1007/s10570-014-0476-z · Cited by 149
“Among them, cellulose nanocrystals (CNC) have become widespread in the literature (Kalia et al. 2011; Lin et al. 2012; Samir et al. 2005; Siqueira et al. 2010).”
BackgroundThermal and Morphological Properties of Poly (Lactic Acid)/Nanocellulose Nanocomposites
Khoo, R. Z., Ismail, H., & Chow, W. S. (2016) · Procedia Chemistry · doi:10.1016/j.proche.2016.03.086 · Cited by 152
Bharimalla, A. K., Deshmukh, S. P., Vigneshwaran, N., Patil, P. G., & Prasad, V. (2016) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2016.1233281 · Cited by 146
“Schematic overview approaches to produce nanocellulosic materials from fibers are given below([53,54]).”
BackgroundSrithep, Y., Ellingham, T., Peng, J., Sabo, R. C., Clemons, C. C., Turng, L., & Pilla, S. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.05.006 · Cited by 145
Controlled grafting of cellulose fibres – an outlook beyond paper and cardboard
Malmström, E., & Carlmark, A. (2011) · Polymer Chemistry · doi:10.1039/c1py00445j · Cited by 149
Karki, S., Gohain, M. B., Yadav, D., & Ingole, P. G. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.11.044 · Cited by 147
Pourreza, N., Golmohammadi, H., Naghdi, T., & Yousefi, H. (2015) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2015.06.041 · Cited by 141
Chen, L., Berry, R. M., & Tam, K. C. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc400540f · Cited by 135
Poly(ε-caprolactone) (PCL)/cellulose nano-crystal (CNC) nanocomposites and foams
Mi, H., Jing, X., Peng, J., Salick, M. R., Peng, X., & Turng, L. (2014) · Cellulose · doi:10.1007/s10570-014-0327-y · Cited by 143
Preparation of Nanocellulose: A Review
Islam, M. T., Alam, M. M., Patrucco, A., Montarsolo, A., & Zoccola, M. (2014) · AATCC Journal of Research · doi:10.14504/ajr.1.5.3 · Cited by 160
Giannakis, S. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2019.02.025 · Cited by 137
Biopolymer-clay nanocomposites as novel and ecofriendly adsorbents for environmental remediation
Orta, M. M., Martín, J., Santos, J. L., Aparicio, I., Medina-Carrasco, S., & Alonso, E. (2020) · Applied Clay Science · doi:10.1016/j.clay.2020.105838 · Cited by 148
Nanocellulose: A mini-review on types and use in drug delivery systems
Raghav, N., Sharma, M. R., & Kennedy, J. F. (2020) · Carbohydrate Polymer Technologies and Applications · doi:10.1016/j.carpta.2020.100031 · Cited by 161
Pal, N., Dubey, P., Gopinath, P., & Pal, K. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.11.041 · Cited by 134
“To get well dispersion of nanofiller into the polymer matrix one can also use the additionally functionalized silylated cellulose nanocrystals (SCNC) as a substitute that will result into increase of tensile modulus and tensile strength by 20% as compared to pure PLA [23,24].”
BackgroundSulaiman, S., Mokhtar, M. N., Naim, M. N., Baharuddin, A. S., & Sulaiman, A. (2014) · Applied Biochemistry and Biotechnology · doi:10.1007/s12010-014-1417-x · Cited by 146
“Cellulose consists of linear chains of homopolysaccharide composed of β-D-glucopyranose units linked together by β-1-4-linkages [35–37], with a degree of polymerization (DP) of approximately 10,000 for cellulose chain in nature and 15,000 for native cellulose cotton [38], as illustrated in Fig.”
BackgroundPinto, R. J. B., Almeida, A., Fernandes, S. C. M., et al. (2012) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2012.09.045 · Cited by 131
Tian, C., Yi, J., Wu, Y., Wu, Q., Qing, Y., & Wang, L. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.09.055 · Cited by 138
Cellulose nanofibrils: a rapid adsorbent for the removal of methylene blue
Chan, C. H., Chia, C. H., Zakaria, S., Sajab, M. S., & Chin, S. X. (2015) · RSC Advances · doi:10.1039/c4ra15754k · Cited by 133
The role of soil properties and it’s interaction towards quality plant fiber: A review
Khalil, H. P. S. A., Hossain, M. S., Rosamah, E., Azli, N. A., Saddon, N., Davoudpoura, Y., Islam, N., & Dungani, R. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.11.099 · Cited by 151
“It is referred as cellulosic or lignocellulosic fibers due to compose mainly of cellulose, hemicelluloses and lignin [10].”
Nasir, M., Hashim, R., Sulaiman, O., & Asim, M. (2017) · Elsevier eBooks · doi:10.1016/b978-0-08-100957-4.00011-5 · Cited by 158
Fundamentals of cellulose lightweight materials: bio-based assemblies with tailored properties
Ferreira, E. S., Rezende, C. A., & Cranston, E. D. (2021) · Green Chemistry · doi:10.1039/d1gc00326g · Cited by 126
Toward a deeper understanding of the thermal degradation mechanism of nanocellulose
Lichtenstein, K., & Lavoine, N. (2017) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2017.09.018 · Cited by 144
Patents involving nanocellulose: Analysis of their evolution since 2010
Charreau, H., Cavallo, E., & Foresti, M. L. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116039 · Cited by 138
Thermal and mechanical properties of PLA-based multiscale cellulosic biocomposites
Ruz-Cruz, M. A., Herrera-Franco, P. J., Flores‐Johnson, E. A., Moreno‐Chulim, M. V., Galera-Manzano, L. M., & Valadez-González, A. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.02.072 · Cited by 145
Microfibrillated cellulose coatings as new release systems for active packaging
Lavoine, N., Desloges, I., & Bras, J. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.12.035 · Cited by 146
Self-citationExtraction and characterization of nanocellulose crystals from cotton gin motes and cotton gin waste
Jordan, J. H., Easson, M. W., Dien, B. S., Thompson, S. R., & Condon, B. (2019) · Cellulose · doi:10.1007/s10570-019-02533-7 · Cited by 132
“CNCs are often produced from bleached wood pulp or other natural fibers and have been obtained from over 30 source materials(Siqueira et al. 2010) and plant species including cotton (Morais et al.”
BackgroundMiao, C., & Hamad, W. Y. (2019) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2019.06.005 · Cited by 144
Bionanocomposites based on gelatin matrix and nanocellulose
Mondragón, G., Peña-Rodríguez, C., González, A., Eceiza, A., & Arbelaiz, A. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.11.003 · Cited by 135
Yang, X., & Berglund, L. A. (2020) · Advanced Materials · doi:10.1002/adma.202001118 · Cited by 135
Leite, L. S. F., Pham, C., Bilatto, S., de Azeredo, H. M. C., Cranston, E. D., Moreira, F. K. V., Mattoso, L. H. C., & Bras, J. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c01774 · Cited by 128
Self-citationHydrothermal Gelation of Aqueous Cellulose Nanocrystal Suspensions
Lewis, L., Derakhshandeh, M., Hatzikiriakos, S. G., Hamad, W. Y., & MacLachlan, M. J. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00906 · Cited by 135
Iridescent Chiral Nematic Cellulose Nanocrystal/Polymer Composites Assembled in Organic Solvents
Cheung, C. C. Y., Giese, M., Kelly, J. A., Hamad, W. Y., & MacLachlan, M. J. (2013) · ACS Macro Letters · doi:10.1021/mz400464d · Cited by 131
Marakana, P. G., Dey, A., & Saini, B. (2021) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2021.106606 · Cited by 138
Natural fiber reinforced poly(vinyl chloride) composites: A review
Khalil, H. P. S. A., Tehrani, M., Davoudpour, Y., Bhat, A. H., Jawaid, M., & Hassan, A. (2012) · Journal of Reinforced Plastics and Composites · doi:10.1177/0731684412458553 · Cited by 134
“The term ‘natural fiber’ used to allocate various types of fibers which naturally come from plants, mineral, and animals.(21) In order to clarify our case, the word ‘natural’ might be cited as ‘vegetable,’ ‘cellulosic,’ or ‘lignocellulosic.”
The modified nanocrystalline cellulose for hydrophobic drug delivery
Qing, W., Wang, Y., Wang, Y., Zhao, D., Liu, X., & Zhu, J. (2016) · Applied Surface Science · doi:10.1016/j.apsusc.2016.01.133 · Cited by 126
Zhao, G., Du, J., Chen, W., Pan, M., & Chen, D. (2019) · Cellulose · doi:10.1007/s10570-019-02683-8 · Cited by 130
Ortiz, C. M., Salgado, P. R., Dufresne, A., & Mauri, A. N. (2018) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2018.01.011 · Cited by 132
Self-citationPreparation of spherical nanocellulose from waste paper by aqueous NaOH/thiourea
Zhang, S., Zhang, F., Jin, L., Liu, B., Mao, Y. H., Liu, Y., & Huang, J. (2019) · Cellulose · doi:10.1007/s10570-019-02434-9 · Cited by 127
Fortunati, E., Benincasa, P., Balestra, G. M., Luzi, F., Mazzaglia, A., Buono, D. D., Puglia, D., & Torre, L. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.07.047 · Cited by 127
Cellulose nanofibers produced from banana peel by enzymatic treatment: Study of process conditions
Tibolla, H., Pelissari, F. M., Rodrigues, M. I., & Menegalli, F. C. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.11.035 · Cited by 132
Water Redispersible Dried Nanofibrillated Cellulose by Adding Sodium Chloride
Missoum, K., Bras, J., & Belgacem, M. N. (2012) · Biomacromolecules · doi:10.1021/bm301378n · Cited by 130
Self-citationdo Nascimento, P. H. A., Marim, R. G., de Carvalho, G. M., & Mali, S. (2016) · Materials Research · doi:10.1590/1980-5373-mr-2015-0423 · Cited by 121
Surface modification of cellulose nanocrystals with cetyltrimethylammonium bromide
Abitbol, T., Marway, H. S., & Cranston, E. D. (2014) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2014-29-01-p046-057 · Cited by 133
Nanocellulose-based membranes for CO2 capture
Ansaloni, L., Salas-Gay, J., Ligi, S., & Baschetti, M. G. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.09.024 · Cited by 123
Bažant, P., Kuřitka, I., Münster, L., et al. (2015) · Cellulose · doi:10.1007/s10570-015-0561-y · Cited by 119
“Cellulose is a very important renewable resource for the development of environmentally friendly, biocompatible and functional materials (Sannino et al. 2009; Siqueira et al. 2010; Sirolli et al. 2000).”
BackgroundDevelopment of nanocellulose-reinforced PLA nanocomposite by using maleated PLA (PLA-g-MA)
Ghasemi, S., Behrooz, R., Ghasemi, I., Yassar, R. S., & Long, F. (2018) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705717734600 · Cited by 118
“So, due to the low interfacial compatibility between polymer and filler, the main problem is represented by the poor dispersion of nanofibers in the polymeric matrix, which may result in lower final properties.(6,18,19) For this reason, researcher used some methods including nanocellulose surface modification or used…”
MethodEom, Y., Son, S. M., Kim, Y. E., Lee, J., Hwang, S.-H., & Chae, H. G. (2019) · Carbon · doi:10.1016/j.carbon.2019.05.007 · Cited by 116
Xiao, S., Gao, R., Gao, L., & Li, J. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.09.115 · Cited by 116
Cellulose: To depolymerize… or not to?
Coseri, S. (2017) · Biotechnology Advances · doi:10.1016/j.biotechadv.2017.01.002 · Cited by 126
Martínez‐Sanz, M., Gidley, M. J., & Gilbert, E. P. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.02.010 · Cited by 122
Lima, M., Gomez, L. D., Steele‐King, C. G., Simister, R., Bernardinelli, O. D., Carvalho, M. A., de Rezende, C. A., Labate, C. A., DeAzevedo, E. R., McQueen‐Mason, S. J., et al. (2014) · Biotechnology for Biofuels · doi:10.1186/1754-6834-7-10 · Cited by 137
“However, the extraction conditions (time, temperature, chemical concentration) are fundamental to the efficient extraction of cellulose nanoparticles with the required characteristics [46].”
BackgroundOutlook and Challenges of Nanotechnologies for Food Packaging
Wyser, Y., Adams, M., Avella, M., Carlander, D., Garcia, L., Pieper, G., Rennen, M., Schuermans, J., & Weiß, J. (2016) · Packaging Technology and Science · doi:10.1002/pts.2221 · Cited by 122
“Although still in their infancy, the amount of research performed on these materials is significant, as can be seen for the review articles by Siqueira et al.74 and more recently by Li et al.75 Research is ongoing to overcome these inherent shortcomings of biopolymer-based packaging materials, with nanotechnology bein…”
BackgroundTen, E., Bahr, D. F., Li, B., Jiang, L., & Wolcott, M. P. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie2023367 · Cited by 122
de Castro, D. O., Bras, J., Gandini, A., & Belgacem, M. N. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.09.101 · Cited by 115
“…covalent grafting of single molecules (acetylation) (Çetin et al., 2009), coupling with isocyanate derivatives (Siqueira et al., 2010b), silylation (Goussé et al., 2002), acetylation with acetic …”
Self-citation
Metadata
- Authors
- Siqueira, G., Bras, J., & Dufresne, A.
- Affiliations
- Institut polytechnique de Grenoble (FR)
- Corresponding author
- Dufresne, Alain
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2010-12-13
- Volume
- 2
- Issue
- 4
- Pages
- 728-765
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W1980921765
- Semantic Scholar
- 88e39e80ebe121f79b7f4d6157891419553dc112
- Cited by
- 1,328
- References
- 151
- Citations by year
- 2026: 44 · 2025: 59 · 2024: 69 · 2023: 89 · 2022: 91 · 2021: 111 · 2020: 83 · 2019: 111 · 2018: 101 · 2017: 118 · 2016: 102 · 2015: 113 · 2014: 117 · 2013: 59 · 2012: 41
- FWCI
- 15.68
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- cellulose nanocrystals, microfibrillated cellulose, cellulose nanoparticles, biocomposites, mechanical properties, barrier properties, packaging materials, emulsion processing, natural fibers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-07, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-07 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.