Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Open accessThe DOI matches its Crossref record; 147 of the 151 references it cites were found in a registry or an index; 5 of the 201 sources its claims cite were checked for support.
Abstract
Cellulose is the most abundant biomass material in nature. Extracted from natural fibers, its hierarchical and multi-level organization allows different kinds of nanoscaled cellulosic fillers—called cellulose nanocrystals or microfibrillated cellulose (MFC)—to be obtained. Recently, such cellulose nanoparticles have been the focus of an exponentially increasing number of works or reviews devoted to understanding such materials and their applications. Major studies over the last decades have shown that cellulose nanoparticles could be used as fillers to improve mechanical and barrier properties of biocomposites. Their use for industrial packaging is being investigated, with continuous studies to find innovative solutions for efficient and sustainable systems. Processing is more and more important and different systems are detailed in this paper depending on the polymer solubility, i.e., (i) hydrosoluble systems, (ii) non-hydrosoluble systems, and (iii) emulsion systems. This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.
Overview
CoChat Summary
TL;DR
This review summarizes preparation, properties, and applications of cellulosic bionanocomposites reinforced with cellulose nanocrystals/whiskers and microfibrillated cellulose (MFC). It reports that these nanofillers can strongly improve mechanical and barrier properties, often via a percolating hydrogen-bonded network, while processing and industrial scale-up remain challenging.
Key findings
- Cellulose nanoparticles act as effective reinforcing fillers; the strong effect is generally attributed to formation of a percolating network above the percolation threshold from hydrogen bonding between nanoparticles.
- Mechanical examples include poly(S-co-BuA) latex with 30 wt% wheat straw cellulose whiskers showing a rubbery Young’s modulus more than 1000-times higher than the bulk matrix; 10 wt% cellulose palm tree whiskers in natural rubber decreased strain at break from 575% to 16%; 5 wt% MFC improved PU modulus by approximately 200% at 5 °C and close to 500% at 85 °C; and PLA-MFC modulus increased from 5 GPa at 10 wt% MFC to almost 9 GPa at 70 wt% MFC.
- Barrier properties can improve: pure MFC films had oxygen transmission rate values of 17.0 and 17.8 mL m⁻² day⁻¹; MFC coating on PLA decreased OTR from 746 to 1 mL m⁻² day⁻¹ Pa⁻¹; and 10 wt% sulfonated whiskers in xylan/sorbitol films decreased WVTR from 304 to 174 g h⁻¹ m⁻².
- Thermal behavior varies: several studies found no important Tg changes with cellulose nanofillers, while moisture, plasticization, and filler content can alter Tg and crystallinity depending on the system.
Methods
- Narrative review of cellulose nanoparticles (whiskers/nanocrystals and MFC), their preparation, characterization, properties, and applications, citing more than 150 references.
- Describes processing routes classified by polymer solubility: hydrosoluble systems, emulsion systems, and non-hydrosoluble systems, plus solvent casting, extrusion, surfactant coating, and surface chemical modification/grafting.
- No new experimental data are generated; the paper synthesizes selected published works and cites SciFinder literature trends, e.g., papers on “cellulose and nano” increased from 57 in 2000 to more than 700 in 2009.
Limitations
- The paper states that toxicity is not discussed because of “a lot of uncertainty,” that practical transition from laboratory to industrial scale is not simple and requires chemical engineering to reduce nanoparticle production costs, and that inconsistent terminology for cellulose nanoparticles causes misunderstanding and ambiguity.
- Evident from the text: as a narrative review, it summarizes “some selected works” rather than using a described systematic search or inclusion criteria, and it does not perform quantitative meta-analysis.
- Evident from the text: many property claims are drawn from cited studies rather than independently verified here, and the review notes limited reported use of cellulose nanocrystals for barrier properties and possible porosity in nanocomposite films reducing MFC efficiency.
Model-written summary. Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
5 Valid · 6 Not valid · 149 Not checked · 42 Own results and interpretations
In the paper
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers. This result was surprising due to the high specific area of such nanofillers, e.g., around 170 m 2 g -1 for tunicin whiskers [139].”
- Also stated in: § 3.2. Thermal Properties · plain
“Several authors did not observed important changes in the Tg of nanocomposites reinforced with cellulose nanofillers.”
What the sources say
- Not checked — no full text of the sourcecites [139] Angles, 2000, Plasticized starch/tunicin whiskers nanocomposites. 1. Structural analysis, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Also stated in: § 3.2. Thermal Properties · plain
In the paper
“However, it seems that, at least under the conditions presented in this work, the cellulose chemical modification via grafting-from technique changes partially the cellulose crystallinity.”
What the sources say
- Not checked — no full text of the sourcecites [44] Morandi, 2009, Cellulose nanocrystals grafted with polystyrene chains through surface-initiated atom transfer radical polymerization (SI-ATRP), Langmuir source
hedgedstates a possible causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“Indeed, classical predicting models for short-fiber composites cannot be applied.”
What the sources say
- Not checked — no full text of the sourcecites [71] Favier, 1995, Polymer nanocomposites reinforced by cellulose whiskers, Macromolecules source
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A claim is checked only against the cited paper’s full text, never its abstract, and none is available for its sources.
In the paper
“The DMA experiments demonstrated that the storage modulus of PU-MFC nanocomposites was improved over the whole temperature range compared to pure PU [136,137].”
What the sources say
- Not checked — no full text of the sourcecites [136] Seydibeyoglu, 2008, Novel nanocomposites based on polyurethane and micro fibrillated cellulose, Compos. Sci. Technol. source
- Not checked — no full text of the sourcecites [137] Wu, 2007, A high strength nanocomposite based on microcrystalline cellulose and polyurethane, Biomacromolecules source
boostedstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
In the paper
“High efficiency was reached by this method that allowed esterification of cellulose nanoparticles to different extents with fatty acid chlorides.”
What the sources say
- Not checked — no full text of the sourcecites [129] Berlioz, 2009, Gas-phase surface esterification of cellulose microfibrils and whiskers, Biomacromolecules source
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
108 more claims
Create a free account to see all 202 claims and to verify the 1 reference still open.
- Probably not a substantial claim. 61
- It may state two separate claims as one. 45
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
“This paper intends to give a clear overview of cellulose nanoparticles reinforced composites with more than 150 references by describing their preparation, characterization, properties and applications.”
§ References
“150. Saxena, A.; Ragauskas, A.J. Water transmission barrier properties of biodegradable films based on cellulosic whiskers and xylan. Carbohyd. Polym. 2009 , 78 , 357-360.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ References
“23. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1296.”
§ References
“35. Lu, J.; Askeland, P.; Drzal, L.T. Surface modification of microfibrillated cellulose for epoxy composite applications. Polymer 2008 , 49 , 1285-1298.”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
§ 3.2. Thermal Properties
“However, when bacterial cellulose nanocrystals were modified with silane groups, Tm values were founded to increase with increasing filler content. According to the authors, this difference was due to stronger interactions between silylated whiskers and PVA matrix.”
§ 3.2. Thermal Properties
“Grunert et al. [43] in their work with cellulose acetate butyrate (CAB) reinforced with bacterial cellulose nanocrystals.”
Citations
Cites
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980 · cited 1×
“[61] gives a clear overview of such cellulosic nanomaterials.”
BackgroundComposites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696 · cited 5×
“The term ―natural fibers‖ is used to designate numerous kinds of fibers that are naturally produced by plants, animals and minerals [5].”
BackgroundInfluentialNishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Natural fibres: Can they replace glass in fibre reinforced plastics?
Wambua, P., Ivens, J., & Verpoest, I. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00096-4 · Cited by 2,676 · cited 1×
“Indeed lignocellulosic materials start to degrade near 220 °C restricting the type of matrix that can be used in association with natural fillers [22,101].”
BackgroundCellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493 · cited 2×
“In their study [86], individualized MFC was obtained by TEMPO-mediated oxidation at room temperature and stirring at 500 rpm.”
MethodJOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453 · cited 1×
“their ability to form hydrogen bonds play a major role in directing the crystalline packing and also governing the physical properties of cellulose [16].”
BackgroundAzizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Self-citationPääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Saito, T., Nishiyama, Y., Putaux, J.-L., Vignon, M., & Isogai, A. (2006) · Biomacromolecules · doi:10.1021/bm060154s · Cited by 1,796 · cited 1×
“[85,86] have proposed a new process to obtain MFC based on TEMPO reaction and strong mixing.”
MethodNatural Fibers, Biopolymers, and Biocomposites
(2005) · CRC Press eBooks · doi:10.1201/9780203508206 · Cited by 1,617
Research works printed but not linked: 9
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Nalwa, H.S. Encyclopedia of Nanoscience and Nanotechnology, American Scientific Publisher. [2nd ed.]. in press.
- Brännvall, E. (2007). Aspect on Strength Delivery and Higher Utilisation of Strength Potential of Soft Wood Kraft Pupl Fibres. [Ph.D. Thesis, KTH, Royal Institute of Technology].
- Kroschwitz, 2003, Cellulose, Encyclopedia of Polymler Science and Technology, Volume 5, 473
- Lu, 2008, Surface modification of microfibrillated cellulose for epoxy composite applications, Polymer, 49, 1285, 10.1016/j.polymer.2008.01.028 · DOI · Paper page
- Herrick, 1983, Microfibrillated cellulose: Morphology and accessibility, J. Appl. Polym. Sci. Appl. Polym. Symp., 37, 797
- Khademhosseini, 2006, Nanobiotechnology—Drug delivery and tissue engineering, Chem. Engin. Progress, 102, 38
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
- Gandini, A., and Belgacem, M.N. (2008). Monomers, Polymers and Composites from Renewable Resources, Elsevier. [1st ed.].
Cited by
Items 301–400 of 1,323
Jordan, J. H., Easson, M. W., & Condon, B. (2019) · Nanomaterials · doi:10.3390/nano9091232 · Cited by 73
“Nanoparticle dimensions of CNCs are typically 5–10 nm in width with lengths of <100–300 nm [14].”
BackgroundMicroalgal nanocellulose – opportunities for a circular bioeconomy
Ross, I. L., Shah, S., Hankamer, B. D., & Amiralian, N. (2021) · Trends in Plant Science · doi:10.1016/j.tplants.2021.05.004 · Cited by 81
Lin, H., Lin, Y., & Hsu, F. (2012) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-012-4734-z · Cited by 73
“It was inferred that during crystallization, the MBG is probably aggregated and subsequently occluded in intercrystalline domains, thereby hindering the crystallization of the polymer [22].”
BackgroundMechanical and antibacterial properties of a nanocellulose-polypyrrole multilayer composite
Bideau, B., Bras, J., Saini, S., Daneault, C., & Loranger, É. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.08.005 · Cited by 72
“The diameter of NFC [22] ranges from approximately 5 to 50 nm. Typically, the size depends mainly on the production process.”
BackgroundInfluentialSelf-citationUltrasonication of spray- and freeze-dried cellulose nanocrystals in water
Beuguel, Q., Tavares, J. R., Carreau, P. J., & Heuzey, M. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2018.01.035 · Cited by 75
Bordoloi, S., Garg, A., & Sreedeep, S. (2017) · Advances in Civil Engineering Materials · doi:10.1520/acem20160076 · Cited by 77
Younas, M., Noreen, A., Sharif, A., Majeed, A., Hassan, A., Tabasum, S., Mohammadi, A., & Zia, K. M. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.11.064 · Cited by 74
Pignon, F., Challamel, M., Geyer, A. D., et al. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.117751 · Cited by 72
Self-citationDivakaran, D., Suyambulingam, I., Rangappa, S. M., Raghunathan, V., Ayyappan, V., & Siengchin, S. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.127687 · Cited by 78
Characterization of Various Kinds of Nanocellulose
Ioelovich, M. (2017) · Wiley eBooks · doi:10.1002/9783527689972.ch2 · Cited by 84
The production, characterization and applications of nanoparticles in the textile industry
Mishra, R., Militký, J., Baheti, V., Huang, J., Kale, B. M., Venkataraman, M., Bele, V. R., Arumugam, V., Zhu, G., & Wang, Y. (2014) · Textile Progress · doi:10.1080/00405167.2014.964474 · Cited by 82
Baghbadorani, N. B., Behzad, T., Etesami, N., & Heidarian, P. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107084 · Cited by 75
Qin, Z., Mo, L., Liao, M., He, H., & Sun, J. (2019) · Polymers · doi:10.3390/polym11111835 · Cited by 71
“As an important factor for potential applications, the overall mechanical properties of SPI has been effectively improved via incorporating nanofillers or constructing chemical crosslinking network [32,33].”
BackgroundBionanowhiskers from jute: Preparation and characterization
Kasyapi, N., Chaudhary, V., & Bhowmick, A. K. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.10.021 · Cited by 73
“Cellulose I has triclinic cell arrangement, mostly found in algae and bacterial cellulose whereas cellulose I is monoclinic allomorph, present in ramie and cotton (Siqueira et al., 2010).”
BackgroundHees, T., Zhong, F., Rudolph, T., Walther, A., & Mülhaupt, R. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605586 · Cited by 73
Interfacial properties of green leaf cellulosic particles
Tenorio, A. T., Gieteling, J., Nikiforidis, C. V., Boom, R. M., & van der Goot, A. J. (2017) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2017.04.030 · Cited by 71
Sakakibara, K., Moriki, Y., Yano, H., & Tsujii, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13963 · Cited by 75
Rosa, R. P., & Rosace, G. (2021) · Macromolecular Materials and Engineering · doi:10.1002/mame.202100345 · Cited by 77
Nasri‐Nasrabadi, B., Behzad, T., & Bagheri, R. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.40063 · Cited by 72
Effects of cellulose fiber content on physical properties of polyurethane based composites
Hadjadj, A., Jbara, O., Tara, A., Gilliot, M., Malek, F., Maafi, E. M., & Tighzert, L. (2015) · Composite Structures · doi:10.1016/j.compstruct.2015.09.043 · Cited by 68
Navarro-Baena, I., Kenny, J. M., & Peponi, L. (2014) · Cellulose · doi:10.1007/s10570-014-0446-5 · Cited by 68
“Nanocomposite materials, formed by a polymeric matrix with embedded nanofillers, embrace many high-performance engineering materials (Siqueira et al. 2010).”
BackgroundPan, M., Zhou, X., & Chen, M. (2013) · BioResources · doi:10.15376/biores.8.1.933-943 · Cited by 74
“The CNWs from the combined treatments have a length of 199 to 344 nm, diameter of 11 to 33 nm, and aspect ratio of 10 to 18, as shown in Table 2, which shows that the materials possessed the intrinsic characteristic of CNWs (Beck-Candanedo et al. 2005; Siró and Plackett 2010).”
BackgroundInfluentialSilva, N. H. C. S., Drumond, I., Almeida, I. F., Costa, P. C., Rosado, C., Neto, C. P., Freire, C. S. R., & Silvestre, A. J. D. (2013) · Cellulose · doi:10.1007/s10570-013-0114-1 · Cited by 78
“Currently, there are two BC based cosmetic masks in the market, namely ‘‘BioCellulose’’ and NanoMasque , in which BC is impregnated with active substances commonly applied in cosmetics (Siqueira et al. 2010) and showed to significantly enhance skin moisture levels (Boonme et al. 2011).”
BackgroundMolecular Dynamics Simulation and Characterization of Graphene–Cellulose Nanocomposites
Rahman, R., Foster, J. T., & Haque, A. (2013) · The Journal of Physical Chemistry A · doi:10.1021/jp402814t · Cited by 67
Short cellulose nanofibrils as reinforcement in polyvinyl alcohol fiber
Peng, J., Ellingham, T., Sabo, R. C., Turng, L., & Clemons, C. M. (2014) · Cellulose · doi:10.1007/s10570-014-0411-3 · Cited by 72
“For rod-like nanoparticles, the percolation threshold (Uc) can be linked to the aspect ratio of the nanoparticles by the following equation (Siqueira et al. 2010):”
BackgroundMoreau, C., Villares, A., Capron, I., & Cathala, B. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.02.028 · Cited by 74
Ribba, L., García, N. L., D’Accorso, N. B., & Goyanes, S. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-809439-6.00003-0 · Cited by 101
Zaaba, N. F., Mariatti, M., & Ismail, H. (2020) · Polymer Engineering and Science · doi:10.1002/pen.25560 · Cited by 72
Hassan, M. L., Moorefield, C. N., Elbatal, H. S., Newkome, G. R., Modarelli, D. A., & Romano, N. C. (2012) · Materials Science and Engineering B · doi:10.1016/j.mseb.2011.12.043 · Cited by 66
He, X., Fan, X., Feng, W., Chen, Y., Guo, T., Wang, F., Liu, J., & Tang, K. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.04.085 · Cited by 69
Cellulose Mineralization as a Route for Novel Functional Materials
Shchipunov, Y. A., & Postnova, I. V. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705042 · Cited by 69
Pinheiro, I. F., Ferreira, F. V., Alves, G. F., Rodolfo, A., Morales, A. R., & Mei, L. H. I. (2019) · Journal of Polymers and the Environment · doi:10.1007/s10924-019-01389-z · Cited by 72
Goswami, R., Singh, S., Narasimhappa, P., Ramamurthy, P. C., Mishra, A., Mishra, P. K., Joshi, H. C., Pant, G., Singh, J., Kumar, G., et al. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.127465 · Cited by 64
Surface grafting of reduced graphene oxide using nanocrystalline cellulose via click reaction
Kabiri, R., & Namazi, H. (2014) · Journal of Nanoparticle Research · doi:10.1007/s11051-014-2474-3 · Cited by 65
“Among carbohydrates, cellulose (Siqueira et al. 2010; Namazi and Jafarirad 2008; Namazi et al. 2014) is one of the most widely used biopolymers that exhibits excellent physical properties such as good flexibility, excellent biocompatibility, and biodegradability, and it is also used as insulating…”
BackgroundPeng, J., Walsh, P. J., Sabo, R. C., et al. (2015) · Polymer · doi:10.1016/j.polymer.2015.12.050 · Cited by 65
Bionanocomposites: Green materials for a sustainable future
Arora, B. M., Bhatia, R., & Attri, P. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-811033-1.00027-5 · Cited by 94
Super Gas Barrier and Fire Resistance of Nanoplatelet/Nanofibril Multilayer Thin Films
Qin, S. M., Pour, M. G., Lazar, S. T., Köklükaya, O., Gerringer, J. C., Song, Y., Wågberg, L., & Grunlan, J. C. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201801424 · Cited by 70
Tibolla, H., Czaikoski, A., Pelissari, F. M., Menegalli, F. C., & Cunha, R. L. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.05.194 · Cited by 65
Bionanocomposite films based on polysaccharides from banana peels
Oliveira, T. Í. S., Rosa, M. D. F., Ridout, M. J., Cross, K. L., de Brito, E. S., Silva, L. K. D. F., Mazzetto, S. E., Waldron, K. W., & de Azeredo, H. M. C. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.03.068 · Cited by 64
“according to Equation 3 [39], results in a volumetric fraction of 1.”
MethodGars, M. L., Bras, J., Salmi-Mani, H., Ji, M., Dragoé, D., Faraj, H., Domenek, S., Belgacem, M. N., & Roger, P. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.115899 · Cited by 66
Self-citationReview of electrically conductive composites and films containing cellulosic fibers or nanocellulose
Zhang, H., Dou, C., Pal, L., & Hubbe, M. A. (2019) · BioResources · doi:10.15376/biores.14.3.7494-7542 · Cited by 66
Reinforcement of Refined and Semi-Refined Carrageenan Film with Nanocellulose
Sedayu, B. B., Cran, M. J., & Bigger, S. W. (2020) · Polymers · doi:10.3390/polym12051145 · Cited by 68
“The improvements in mechanical properties as a result of the addition of NCF may be attributed to the highly interfacial interactions between the high-strength cellulose and carrageenan polymer [53], in conjunction with an even dispersion of the cellulose particles within the polymer matrix, which subsequently strengt…”
BackgroundSim, K., Lee, J., Lee, H., & Youn, H. J. (2015) · Cellulose · doi:10.1007/s10570-015-0784-y · Cited by 62
“Cellulose nanofibrils (CNF) are considered a potential material for use in various industrial fields such as biocomposites (Siqueira et al. 2010; Siró and Plackett 2010), electronic devices (Okahisa et al. 2009; Zheng et al. 2013), medicine (Bhattacharya et al. 2012; Cai et al. 2014; Plackett et…”
BackgroundLazko, J., Sénéchal, T., Landercy, N., Dangreau, L., Raquez, J., & Dúbois, P. (2014) · Cellulose · doi:10.1007/s10570-014-0417-x · Cited by 68
Preparation and characterization of electrospun PLA/nanocrystalline cellulose‐based composites
Pirani, S. I., Abushammala, H., & Hashaikeh, R. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39576 · Cited by 68
Development, application and commercialization of transparent paper
Fang, Z., Zhu, H., Preston, C., & Hu, L. (2014) · Translational Materials Research · doi:10.1088/2053-1613/1/1/015004 · Cited by 67
Printed Humidity Sensors from Renewable and Biodegradable Materials
Aeby, X., Bourely, J., Poulin, A., et al. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202201302 · Cited by 62
Self-citationLazarini, S. C., de Aquino, R., Amaral, A. C., Corbi, F. C. A., Corbi, P. P., Barud, H. D. S., & Lustri, W. R. (2015) · Cellulose · doi:10.1007/s10570-015-0843-4 · Cited by 63
“Structurally, BC is composed of a three-dimensional network of nanofibrils, maintained by hydrogen bonds within intra- and interfibrillar interactions, resulting in a hydrogel with high mechanical strength (Fu et al. 2013; Siqueira et al. 2010).”
BackgroundThe Preparations and Water Vapor Barrier Properties of Polyimide Films Containing Amide Moieties
Zhang, K., Yu, Q., Zhu, L., Liu, S., Chi, Z., Chen, X., Zhang, Y., & Xu, J. (2017) · Polymers · doi:10.3390/polym9120677 · Cited by 63
Santana, J. S., Costa, É. K. D. C., Rodrigues, P. R., Correia, P. R. C., Cruz, R. S., & Druzian, J. I. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.47001 · Cited by 69
Use of Cellulose and Oxidized Cellulose Nanocrystals from Olive Stones in Chitosan Bionanocomposites
ABOUZEID, R. E., Hassan, E. A., Bettaieb, F., Khiari, R., & Hassan, M. L. (2015) · Journal of Nanomaterials · doi:10.1155/2015/687490 · Cited by 62
An, X., Wen, Y., Cheng, D., Zhu, X., & Ni, Y. (2016) · Cellulose · doi:10.1007/s10570-016-0964-4 · Cited by 63
Cellulose Nanocrystals for Health Care Applications
Shankaran, D. R. (2018) · Elsevier eBooks · doi:10.1016/b978-0-08-101971-9.00015-6 · Cited by 86
Recent trends using natural polymeric nanofibers as supports for enzyme immobilization and catalysis
Khan, R. S., Rather, A. H., Wani, T. U., Rather, S., Amna, T., Hassan, M. S., & Sheikh, F. A. (2022) · Biotechnology and Bioengineering · doi:10.1002/bit.28246 · Cited by 67
“D‐ glucopyranose units linked by β‐1‐4‐linkages (Brinchi et al., 2013; Habibi et al., 2010; G. Siqueira et al., 2010) (Figure 3e).”
BackgroundUnique viscoelastic behaviors of colloidal nanocrystalline cellulose aqueous suspensions
Lu, A., Hemraz, U. D., Khalili, Z., & Boluk, Y. (2014) · Cellulose · doi:10.1007/s10570-014-0173-y · Cited by 67
“…example, on its fabrication (Samir et al. 2005; Eichhorn et al. 2010; Siqueira et al. 2010; Gatenholm and Klemm 2010; Dufresne 2008), modification (Siqueira et al. 2010; Gatenholm and Klemm 2010; Dufresne 2008; de Souza Lima and Borsali 2004; Filpponen and Argyropoulos 2010; Zoppe et al. 2011;…”
InfluentialMultilevel composition fractionation process for high-value utilization of wheat straw cellulose
Chen, H., & Liu, Z. (2014) · Biotechnology for Biofuels · doi:10.1186/s13068-014-0137-3 · Cited by 63
“High length-to-width ratio of cellulose should be beneficial to the mechanical property of RCF [23,24].”
InfluentialPolyhydroxybutyrate-Based Nanocomposites with Cellulose Nanocrystals and Bacterial Cellulose
Seoane, I. T., Cerrutti, P., Vázquez, A., Manfredi, L. B., & Cyras, V. P. (2016) · Journal of Polymers and the Environment · doi:10.1007/s10924-016-0838-8 · Cited by 60
“Cellulose is the most abundant biomass material in nature [12, 13], and cellulose nanocrystals (CNC) can be obtained by strong acid hydrolysis of & V.”
BackgroundMethodInfluentialNanocellulose- based biosensor for colorimetric detection of glucose
Neubauerova, K., Carneiro, M. C. C. G., Rodrigues, L. R., Moreira, F. T. C., & Sales, M. G. F. (2020) · Sensing and Bio-Sensing Research · doi:10.1016/j.sbsr.2020.100368 · Cited by 66
Liu, Q., Liu, J., Qin, S., Pei, Y., Zheng, X., & Tang, K. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.08.044 · Cited by 58
da Silva, M. P., & Fabi, J. P. (2022) · Food Hydrocolloids for Health · doi:10.1016/j.fhfh.2022.100079 · Cited by 71
de Assis, S. C., Morgado, D. L., Scheidt, D. T., de Souza, S. S., Cavallari, M. R., Ando, O. H., & Carrilho, E. (2023) · Biosensors · doi:10.3390/bios13010142 · Cited by 62
“Nanocellulose is classified into three kinds of materials (Table 1): (i) cellulose nanofibrils (CNFs), also referred to as nanofibrillated cellulose (NFC); (ii) cellulose nanocrystals (CNCs), also referred to as nanocrystalline cellulose (NCC) and cellulose nanowhiskers (CNWs); and (iii) bacterial nanocellulose (BNC),…”
BackgroundReinforcement of cellulose nanofibers in polyacrylamide gels
Chen, C., Wang, H., Li, S., et al. (2017) · Cellulose · doi:10.1007/s10570-017-1512-6 · Cited by 59
“Nanocellulose (e.g. nanofibers and nanocrystals) has been widely used to strengthen the composites due to their nanoscale dimensions, high aspect ratio, and high Young’s modulus (Huang et al. 2016; Ma et al. 2016; Siró and Plackett 2010; Siqueira et al. 2010).”
BackgroundKhili, F., Borges, J. P., Almeida, P. L., Boukherroub, R., & Dakhlaoui, A. (2018) · Waste and Biomass Valorization · doi:10.1007/s12649-018-0202-4 · Cited by 59
Pyrgiotakis, G., Luu, W. T., Zhang, Z., Vaze, N., DeLoid, G. M., Rubio, L., Graham, W. A., Bell, D. C., Bousfield, D. W., & Demokritou, P. (2018) · Cellulose · doi:10.1007/s10570-018-1718-2 · Cited by 59
“During the CNCs synthesis, the acid hydrolysis removes most of the amorphous cellulose leaving the crystalline form of cellulose (Siqueira et al. 2010).”
BackgroundMethodAntimicrobial Activity of Cellulose Based Materials
Nemeş, N. S., Ardean, C., Davidescu, C. M., Negrea, A., Ciopec, M., Duţeanu, N., Negrea, P., Paul, C., Duda-Seiman, D., & Muntean, D. (2022) · Polymers · doi:10.3390/polym14040735 · Cited by 63
“The repeating segment is a glucose dimer known as cellobiose [6,14,17].”
BackgroundGrate, J. W., Mo, K., Shin, Y., Vasdekis, A. E., Warner, M. G., Kelly, R., Orr, G., Hu, D., Dehoff, K. J., Brockman, F. J., et al. (2015) · Bioconjugate Chemistry · doi:10.1021/acs.bioconjchem.5b00048 · Cited by 58
Optimization of a Wood Plastic Composite for Architectural Applications
Martins, G., Antunes, F., Mateus, A., & Malça, C. (2017) · Procedia Manufacturing · doi:10.1016/j.promfg.2017.08.025 · Cited by 65
Cellulose Reinforced Biodegradable Polymer Composite Film for Packaging Applications
Khalil, H. P. S. A., Tye, Y. Y., Leh, C. P., Saurabh, C. K., Ariffin, F., Fizree, H. M., Mohamed, A., & Suriani, A. B. (2017) · Springer eBooks · doi:10.1007/978-3-319-67319-6_3 · Cited by 73
“It is generally produced from the acid hydrolysis of cellulosic pulp fiber to remove the amorphous region of cellulose (Ashori and Nourbakhsh 2010; Siqueira et al. 2010).”
BackgroundInfluentialHu, Z., Zhai, R., Li, J., Zhang, Y., & Lin, J. (2017) · International Journal of Polymer Science · doi:10.1155/2017/9850814 · Cited by 62
Properties of poly(acrylamide)/TEMPO-oxidized cellulose nanofibril composite films
Kurihara, T., & Isogai, A. (2013) · Cellulose · doi:10.1007/s10570-013-0124-z · Cited by 61
“Because NFCs prepared using only mechanical treatment in water or in combination with enzymatic and carboxymethylation pretreatments have high crystallinities, Young’s modulus, tensile strengths, and surface areas, and form network structures in aqueous dispersions and dried materials, self-standing films, coating lay…”
BackgroundNanocellulose/Starch Biopolymer Nanocomposites: Processing, Manufacturing, and Applications
Ilyas, R. A., Sapuan, S. M., Norrrahim, M. N. F., Yasim‐Anuar, T. A. T., Kadier, A., Kalil, M. S., Atikah, M. S. N., Ibrahim, R., Asrofi, M., Abral, H., et al. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-819661-8.00006-8 · Cited by 73
Iyer, K. A., Flores, A. M., & Torkelson, J. M. (2015) · Polymer · doi:10.1016/j.polymer.2015.08.029 · Cited by 57
de Lima, G. F., Souza, A. G., & Rosa, D. D. S. (2018) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2018.07.080 · Cited by 56
Conversion of Lignocellulose for Bioethanol Production, Applied in Bio-Polyethylene Terephthalate
Damayanti, D., Supriyadi, D., Amelia, D., Saputri, D. R., Listyadevi, Y. L., Auriyani, W. A., & Wu, H. (2021) · Polymers · doi:10.3390/polym13172886 · Cited by 59
“Cellulose is a natural substance that is the primary constituent of plant cell walls [21], with the range of diameters from 2 to 20 nm and lengths ranging from 100 to 40,000 nm [22].”
BackgroundCellulose-Based Functional Materials for Sensing
Gabrielli, V., & Frasconi, M. (2022) · Chemosensors · doi:10.3390/chemosensors10090352 · Cited by 59
“Additionally, given the cellulose strength and reinforcing ability, it has been frequently used alone or as composite with synthetic polymers and biopolymers as a support matrix for several applications, including their incorporation in sensing and biosensing devices [8–11].”
Cellulose nanoparticles are a biodegradable photoacoustic contrast agent for use in living mice
Jokerst, J. V., Sompel, D. V. D., Bohndiek, S. E., & Gambhir, S. S. (2014) · Photoacoustics · doi:10.1016/j.pacs.2014.07.001 · Cited by 61
“This material has a crystalline structure [28], is readily available from renewable sources, well characterized, and easily manipulated through a variety of chemical processes [29].”
BackgroundNew approach for extraction of cellulose from tucumã's endocarp and its structural characterization
Manzato, L., Rabelo, L. C. A., de Souza, S. M., da Silva, C. G., Sanches, E. A., Rabelo, D., Mariúba, L. A. M., & Simonsen, J. (2017) · Journal of Molecular Structure · doi:10.1016/j.molstruc.2017.04.088 · Cited by 57
Zuo, Y., Li, W., Li, P., et al. (2018) · Industrial Crops and Products · doi:10.1016/j.indcrop.2018.07.024 · Cited by 55
Xie, J., Jia, D., Dirican, M., Xia, Y., Li, C., Liu, Y., Cui, M., Yan, C., Wan, J., Liu, H., et al. (2022) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c01353 · Cited by 55
Lavoine, N., Desloges, I., Sillard, C., & Bras, J. (2014) · Cellulose · doi:10.1007/s10570-014-0392-2 · Cited by 61
Self-citationFortunati, E., Luzi, F., Puglia, D., Terenzi, A., Vercellino, M., Visai, L., Santulli, C., Torre, L., & Kenny, J. M. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.05.015 · Cited by 57
A Review on Preparation and Properties of Cellulose Nanocrystal-Incorporated Natural Biopolymer
Nandi, S., & Guha, P. (2018) · Journal of Packaging Technology and Research · doi:10.1007/s41783-018-0036-3 · Cited by 56
Mabrouk, A. B., Brochier-Salon, M.-C., Magnin, A., Belgacem, M. N., & Boufi, S. (2014) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2014.01.077 · Cited by 58
Xu, Y., Salmi, J., Kloser, E., Perrin, F., Große, S., Denault, J., & Lau, P. C. K. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.09.029 · Cited by 58
“Besides, its high aspect ratio (length/diameter) is important for stress transfer in a biocomposite setting (Siqueira et al., 2010; Habibi et al., 2010; Moon et al., 2011; Klemm et al., 2011 Brinchi et al., 2013).”
BackgroundSaini, S., Belgacem, M. N., Mendes, J. P., Elegir, G., & Bras, J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04938 · Cited by 53
Self-citationDutta, K., Das, B., Orasugh, J. T., Mondal, D., Adhikari, A., Rana, D. K., Banerjee, R., Mishra, R., Kar, S., & Chattopadhyay, D. (2017) · Polymer · doi:10.1016/j.polymer.2017.12.015 · Cited by 54
Extraction of Cellulose Nanofibers and Their Eco-friendly Polymer Composites
Hussin, M. H., Trache, D., Chuin, C. T. H., Fazita, M. R. N., Haafiz, M. K. M., & Hossain, M. S. (2019) · Springer eBooks · doi:10.1007/978-3-030-05399-4_23 · Cited by 59
Kusmono, K., & Affan, M. (2020) · Journal of Natural Fibers · doi:10.1080/15440478.2020.1821292 · Cited by 53
“NCC is needlelike cellulosic nano-materials with a width of 5–10 nm and length of 100–500 nm produced from natural cellulose sources via acid hydrolysis (Boluk et al. 2011; Siqueira, Bras, and Dufresne 2010).”
MethodMalekzadeh, E., Tatari, A., & Firouzabadi, M. D. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.120699 · Cited by 60
Nanoparticle Synthesis and Their Integration into Polymer-Based Fibers for Biomedical Applications
Domingues, J., Miranda, C. S., Homem, N. C., Felgueiras, H. P., & Antunes, J. C. (2023) · Biomedicines · doi:10.3390/biomedicines11071862 · Cited by 63
Acetylation of Nanocellulose: Miscibility and Reinforcement Mechanisms in Polymer Nanocomposites
Wohlert, J., Chen, P., Berglund, L. A., & Re, G. L. (2023) · ACS Nano · doi:10.1021/acsnano.3c04872 · Cited by 57
Ang-atikarnkul, P., Watthanaphanit, A., & Rujiravanit, R. (2014) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.03.006 · Cited by 55
Pirani, S. I., & Hashaikeh, R. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.06.063 · Cited by 61
Naderi, A., Lindström, T., Sundström, J., Pettersson, T., Flodberg, G., & Erlandsson, J. (2015) · Cellulose · doi:10.1007/s10570-015-0577-3 · Cited by 58
“The popularity of the material is based not only on several exciting properties (Siquiera et al. 2010; Isogai et al. 2011; Lavoine et al. 2012), which are incidentally shared by the other member of the nanocellulose family, but also due the ability of producing the material by industrially feasible…”
BackgroundMirosanloo, A., Zareyee, D., & Khalilzadeh, M. A. (2018) · Applied Organometallic Chemistry · doi:10.1002/aoc.4546 · Cited by 52
Li, L., Zhang, H., Zhang, Q., Wang, T., & Hou, X. (2021) · Analytica Chimica Acta · doi:10.1016/j.aca.2021.338984 · Cited by 48
Sofiah, A. G. N., Pasupuleti, J., Samykano, M., Kadirgama, K., Koh, S. P., Kiong, T. S., Pandey, A. K., Yaw, C. T., & Natarajan, S. K. (2023) · Polymers · doi:10.3390/polym15143044 · Cited by 66
Nair, J. R., Chiappone, A., Gerbaldi, C., Ijeri, V. S., Zeno, E., Bongiovanni, R. M., Bodoardo, S., & Penazzi, N. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.03.124 · Cited by 55
Naderi, A., & Lindström, T. (2014) · Cellulose · doi:10.1007/s10570-014-0394-0 · Cited by 55
“The reader is referred to some of the many general reviews and books (Lucian and Rojas 2009; Eichhorn et al. 2010; Siquiera et al. 2010; Isogai et al. 2011; Lindström et al. 2014) on the subject of nanocellulosic materials to get the development”
BackgroundSong, H., Luo, Z., Wang, C.-Z., Hao, X.-F., & Gao, J. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.05.079 · Cited by 53
Metadata
- Authors
- Siqueira, G., Bras, J., & Dufresne, A.
- Affiliations
- Institut polytechnique de Grenoble (FR)
- Corresponding author
- Dufresne, Alain
- Venue
- Polymers
- Publisher
- MDPI AG
- Published
- 2010-12-13
- Volume
- 2
- Issue
- 4
- Pages
- 728-765
- ISSN
- 2073-4360 (ISSN-L)
- OpenAlex
- W1980921765
- Semantic Scholar
- 88e39e80ebe121f79b7f4d6157891419553dc112
- Cited by
- 1,328
- References
- 151
- Citations by year
- 2026: 44 · 2025: 59 · 2024: 69 · 2023: 89 · 2022: 91 · 2021: 111 · 2020: 83 · 2019: 111 · 2018: 101 · 2017: 118 · 2016: 102 · 2015: 113 · 2014: 117 · 2013: 59 · 2012: 41
- FWCI
- 15.68
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- Locations
- Polymers (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- cellulose nanocrystals, microfibrillated cellulose, cellulose nanoparticles, biocomposites, mechanical properties, barrier properties, packaging materials, emulsion processing, natural fibers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-07, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-07 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.