CoChat

Real-Time Estimation of Pathological Tremor Parameters from Gyroscope Data

Open access
Gallego, Juan, Rocon, Eduardo, Roa, Javier O., Moreno, Juan, Pons, José L. · 2010 · Sensors

The DOI matches its Crossref record; 40 of the 42 references it cites were found in a registry or an index; 4 of the 53 sources its claims cite were checked for support.

Abstract

This paper presents a two stage algorithm for real-time estimation of instantaneous tremor parameters from gyroscope recordings. Gyroscopes possess the advantage of providing directly joint rotational speed, overcoming the limitations of traditional tremor recording based on accelerometers. The proposed algorithm first extracts tremor patterns from raw angular data, and afterwards estimates its instantaneous amplitude and frequency. Real-time separation of voluntary and tremorous motion relies on their different frequency contents, whereas tremor modelling is based on an adaptive LMS algorithm and a Kalman filter. Tremor parameters will be employed to drive a neuroprosthesis for tremor suppression based on biomechanical loading.

Overview

CoChat Summary

## TL;DR

The paper proposes a two-stage real-time method for estimating pathological tremor amplitude and frequency from gyroscope data by first removing voluntary motion and then modeling the remaining tremor. The authors report that the best setup is a Critically Dampened Filter for voluntary motion tracking plus a WFLC-KF cascade for tremor estimation, with average amplitude error of 0.001 ± 0.002 rad/s.

## Key findings

  • The authors report that pathological tremor generally lies in the 3–12 Hz band, while voluntary motion is mostly 0–2 Hz, and use this separation to justify their two-stage design.
  • For voluntary motion tracking, the Critically Dampened Filter (CDF) with θ = 0.990 had the least KTE and was selected as the best stage-1 filter.
  • For tremor modeling, the best performer was a cascade of WFLC + Kalman Filter, which the authors say produced the least FMSEd for all tasks; they state FMSEd was at least five times smaller than with the BMFLC.
  • The final system achieved an average tremor amplitude estimation error of 0.001 ± 0.002 rad/s and frequency estimates that agreed with spectrograms.

## Methods

  • The study recorded wrist flexion-extension using two solid-state gyroscopes placed on the distal forearm and hand; data were sampled at 1 kHz.
  • The sample included 5 patients with tremor-related pathologies: 4 men and 1 woman, aged 48 to 74 years (average 63), recruited at Hôpital Erasme, Brussels.
  • Patients performed four tasks: arms outstretched (30 s), finger to nose (30 s), rest (30 s), and pouring 20 cl of water.
  • Main analysis: stage 1 compared BBF, CDF, and KF using KTE; stage 2 compared WFLC, BMFLC, and a WFLC-KF cascade using FMSEd.

## Limitations

  • The paper states that the patient sample was small: 5 patients only.
  • It also states that patients had different pathologies that cause tremor, but the text provided does not specify the diagnosis mix in the body beyond referring to Table 1, so generalizability across tremor types is limited by the evidence shown here.
  • Evident from the text: the evaluation is based on a controlled set of short clinical/functional tasks, so the results may not extend to unconstrained daily-life movement; this is not explicitly stated as a limitation in the paper.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.3390/s100302129

Cites

40 of 40 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1. Placement of MEMS gyroscopes (red boxes) for recording wrist flexion-extension. A differential measurement directly provides wrist rotation.
Figure 1. Placement of MEMS gyroscopes (red boxes) for recording wrist flexion-extension. A differential measurement directly provides wrist rotation.CC BY · PubMed Central
Figure 2. Relationship between gyroscope offset and temperature. Top plot shows temperature variation measured by the IMU. Bottom plot shows correlation between offset and temperature for X (blue), Y (green) and Z (red) axis gyroscopes. High correlation is observed.
Figure 2. Relationship between gyroscope offset and temperature. Top plot shows temperature variation measured by the IMU. Bottom plot shows correlation between offset and temperature for X (blue), Y (green) and Z (red) axis gyroscopes. High correlation is observed.CC BY · PubMed Central
Figure 3. Power spectral density of wrist rotation during a finger to nose task performed by patient 01. It is observed that voluntary movement (below 2 Hz) has considerably more energy than tremorous movement (centered around 5.5 Hz). Dashed red line separates energy attributed to voluntary (left) and tremorous motion (right).
Figure 3. Power spectral density of wrist rotation during a finger to nose task performed by patient 01. It is observed that voluntary movement (below 2 Hz) has considerably more energy than tremorous movement (centered around 5.5 Hz). Dashed red line separates energy attributed to voluntary (left) and tremorous motion (right).CC BY · PubMed Central
Figure 4. Separation of voluntary and tremorous components of movement by means of recursive digital filters. Top left figure shows the original signal (black) and voluntary movement (red) obtained with a zero phase low pass filter, fc = 2 Hz. Bottom left plot shows tremorous movement obtained by subtracting voluntary movement from the original signal. Right plots show power spectral densities of voluntary (top) and tremorous components (bottom).
Figure 4. Separation of voluntary and tremorous components of movement by means of recursive digital filters. Top left figure shows the original signal (black) and voluntary movement (red) obtained with a zero phase low pass filter, fc = 2 Hz. Bottom left plot shows tremorous movement obtained by subtracting voluntary movement from the original signal. Right plots show power spectral densities of voluntary (top) and tremorous components (bottom).CC BY · PubMed Central
Figure 5. Block diagram of the two stage algorithm for real-time estimation of tremor parameters. First, we generate an estimation of the voluntary component of motion, which subtracted from the total movement yields an estimate of tremor. Afterwards, in stage two, and adaptive algorithm tracks instantaneous tremor parameters.
Figure 5. Block diagram of the two stage algorithm for real-time estimation of tremor parameters. First, we generate an estimation of the voluntary component of motion, which subtracted from the total movement yields an estimate of tremor. Afterwards, in stage two, and adaptive algorithm tracks instantaneous tremor parameters.CC BY · PubMed Central
Figure 6. Comparison between CDF and BBF estimation of voluntary movement from raw gyroscope data during an arms outstretched test performed by patient 01.
Figure 6. Comparison between CDF and BBF estimation of voluntary movement from raw gyroscope data during an arms outstretched test performed by patient 01.CC BY · PubMed Central
Figure 7. Top plot: Comparison between tremor amplitude tracking with the WFLC (blue line), and a cascade algorithm compound by a KF preceded by a WFLC (red line). Bottom plot: frequency tracking with the WFLC (solid line), plotted against tremor spectrogram. Data corresponds to an arms outstretched test performed by patient 01.
Figure 7. Top plot: Comparison between tremor amplitude tracking with the WFLC (blue line), and a cascade algorithm compound by a KF preceded by a WFLC (red line). Bottom plot: frequency tracking with the WFLC (solid line), plotted against tremor spectrogram. Data corresponds to an arms outstretched test performed by patient 01.CC BY · PubMed Central
Figure 8. Block diagram summarizing the two stage algorithm for real-time estimation of instantaneous tremor parameters. First, a Critically Dampened Filter estimates voluntary motion from raw kinematic data. Next, we generate an estimation of tremor by subtracting voluntary from raw movement. At the second stage, the Weighted Frequency Fourier Linear Combiner estimates instantaneous tremor frequency, and then feds it into a Kalman Filter that tracks instantaneous tremor amplitude.
Figure 8. Block diagram summarizing the two stage algorithm for real-time estimation of instantaneous tremor parameters. First, a Critically Dampened Filter estimates voluntary motion from raw kinematic data. Next, we generate an estimation of tremor by subtracting voluntary from raw movement. At the second stage, the Weighted Frequency Fourier Linear Combiner estimates instantaneous tremor frequency, and then feds it into a Kalman Filter that tracks instantaneous tremor amplitude.CC BY · PubMed Central

Verification

Claims the paper makes

4 Valid · 0 Not valid · 41 Not checked · 46 Own results and interpretations

40 more claims

Create a free account to see all 91 claims and every source verdict.

See all claims — free account
  • Probably not a substantial claim. 24
  • It may state two separate claims as one. 28

Create a free account to see these claims.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 3

  1. Elble, R.J., and Koller, W.C. (1990). Tremor, The John Hopkins Univesity Press.
  2. Riviere, C.N. (Adaptive Suppression of Tremor for Improved Human Machine Control, 1981). Adaptive Suppression of Tremor for Improved Human Machine Control, PhD Thesis;.
  3. Rocon, E. (Reducción Activa de Temblor Patológico de Miembro Superior Mediante Exoesqueletos Robóticos, 2006). Reducción Activa de Temblor Patológico de Miembro Superior Mediante Exoesqueletos Robóticos, PhD Thesis;.

Cited by

See all 109

Metadata

Authors
Gallego, J., Rocon, E., Roa, J. O., Moreno, J., & Pons, J. L.
Affiliations
  • Consejo Superior de Investigaciones Científicas (ES)
  • Bioengineering Group, Consejo Superior de Investigaciones Científicas, CSIC, Ctra. Campo Real, km 0.2 La Poveda, 28500, Arganda del Rey, Spain
Corresponding author
Gallego, Juan
Venue
Sensors
Publisher
MDPI AG
Published
2010-03-16
Volume
10
Issue
3
Pages
2129-2149
ISSN
1424-8220 (ISSN-L)
OpenAlex
W2123467994
Cited by
107
References
42
Citations by year
2025: 6 · 2024: 5 · 2023: 5 · 2022: 2 · 2021: 13 · 2020: 10 · 2019: 9 · 2018: 8 · 2017: 6 · 2016: 10 · 2015: 2 · 2014: 6 · 2013: 12 · 2012: 6
FWCI
4.84
Type
journal article
Language
en
Open access
Locations
  • Sensors (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics
  • Life Sciences › Neuroscience › Cognitive Neuroscience › Motor Control and Adaptation
  • Physical Sciences › Engineering › Biomedical Engineering › Muscle activation and electromyography studies
  • Physical Sciences › Engineering › Aerospace Engineering › Inertial Sensor and Navigation
Keywords
pathological tremor, gyroscope data, real-time estimation, adaptive LMS algorithm, Kalman filter, tremor suppression, neural prostheses, biomechanical loading
MeSH terms
Aged, Algorithms, Biomechanical Phenomena, Clothing, Female, Humans, Male, Middle Aged, Pattern Recognition, Automated, Rotation, Tremor, Wrist, Monitoring, Ambulatory

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-09-29, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-09-29 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.