The DOI matches its Crossref record; 74 of the 74 references it cites were found in a registry or an index.
Fabrication of Transistors on Flexible Substrates: from Mass‐Printing to High‐Resolution Alternative Lithography Strategies
Open accessAbstract
In this report, the development of conventional, mass‐printing strategies into high‐resolution, alternative patterning techniques is reviewed with the focus on large‐area patterning of flexible thin‐film transistors (TFTs) for display applications. In the first part, conventional and digital printing techniques are introduced and categorized as far as their development is relevant for this application area. The limitations of conventional printing guides the reader to the second part of the progress report: alternative‐lithographic patterning on low‐cost flexible foils for the fabrication of flexible TFTs. Soft and nanoimprint lithography‐based patterning techniques and their limitations are surveyed with respect to patterning on low‐cost flexible foils. These show a shift from fabricating simple microlense structures to more complicated, high‐resolution electronic devices. The development of alternative, low‐temperature processable materials and the introduction of high‐resolution patterning strategies will lead to the low‐cost, self‐aligned fabrication of flexible displays and solar cells from cheaper but better performing organic materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Materials and Mechanics for Stretchable Electronics
Rogers, J. A., Someya, T., & Huang, Y. (2010) · Science · doi:10.1126/science.1182383 · Cited by 5,042
Xia, Y., & Whitesides, G. M. (1998) · Angewandte Chemie International Edition · doi:10.1002/(sici)1521-3773(19980316)37:5<550::aid-anie550>3.0.co;2-g · Cited by 4,285
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W., & Woo, E. P. (2000) · Science · doi:10.1126/science.290.5499.2123 · Cited by 3,311
Imprint of sub-25 nm vias and trenches in polymers
Chou, S. Y., Krauss, P. R., & Renstrom, P. J. (1995) · Applied Physics Letters · doi:10.1063/1.114851 · Cited by 2,706
Soft lithography for micro- and nanoscale patterning
Qin, D., Xia, Y., & Whitesides, G. M. (2010) · Nature Protocols · doi:10.1038/nprot.2009.234 · Cited by 2,334
Imprint Lithography with 25-Nanometer Resolution
Chou, S. Y., Krauss, P. R., & Renstrom, P. J. (1996) · Science · doi:10.1126/science.272.5258.85 · Cited by 2,277
New Approaches to Nanofabrication: Molding, Printing, and Other Techniques
Gates, B. D., Xu, Q., Stewart, M., Ryan, D., Willson, C. G., & Whitesides, G. M. (2005) · Chemical Reviews · doi:10.1021/cr030076o · Cited by 2,020
Stretchable and Foldable Silicon Integrated Circuits
Kim, D.-H., Ahn, J.-H., Choi, W. M., Kim, H.-S., Kim, T.-H., Song, J., Huang, Y. Y., Liu, Z., Lu, C., & Rogers, J. A. (2008) · Science · doi:10.1126/science.1154367 · Cited by 1,676
Kumar, A., & Whitesides, G. M. (1993) · Applied Physics Letters · doi:10.1063/1.110628 · Cited by 1,605
Roll-to-roll fabrication of polymer solar cells
Søndergaard, R., Hösel, M., Angmo, D., Larsen-Olsen, T. T., & Krebs, F. C. (2012) · Materials Today · doi:10.1016/s1369-7021(12)70019-6 · Cited by 1,450
Rogers, J. A., Bao, Z., Baldwin, K., Dodabalapur, A., Crone, B., Raju, V. R., Kuck, V., Katz, H., Amundson, K., Ewing, J., et al. (2001) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.091588098 · Cited by 1,117
Organic light‐emitting diode (OLED) technology: materials, devices and display technologies
Geffroy, B., le Roy, P., & Prat, C. (2006) · Polymer International · doi:10.1002/pi.1974 · Cited by 1,058
Polymer microstructures formed by moulding in capillaries
Kim, E., Xia, Y., & Whitesides, G. M. (1995) · Nature · doi:10.1038/376581a0 · Cited by 878
Stretchable, Large‐area Organic Electronics
Sekitani, T., & Someya, T. (2010) · Advanced Materials · doi:10.1002/adma.200904054 · Cited by 773
Pentacene-based radio-frequency identification circuitry
Baude, P. F., Ender, D. A., Haase, M. A., Kelley, T. W., Muyres, D. V., & Theiss, S. D. (2003) · Applied Physics Letters · doi:10.1063/1.1579554 · Cited by 755
Perelaer, J., Smith, P. J., Mager, D., Soltman, D., Volkman, S. K., Subramanian, V., Korvink, J. G., & Schubert, U. S. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00264j · Cited by 736
Recent progress in nanoimprint technology and its applications
Guo, L. J. (2004) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/37/11/r01 · Cited by 733
Nanoimprint lithography: An old story in modern times? A review
Schift, H. (2008) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.2890972 · Cited by 726
Metal deposition from a supported metal film using an excimer laser
Bohandy, J., Kim, B. F., & Adrian, F. J. (1986) · Journal of Applied Physics · doi:10.1063/1.337287 · Cited by 686
Ahn, S. H., & Guo, L. J. (2009) · ACS Nano · doi:10.1021/nn9003633 · Cited by 667
Mold-assisted nanolithography: A process for reliable pattern replication
Haisma, J., Verheijen, M., van den Heuvel, K., & van den Berg, J. (1996) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.588604 · Cited by 659
Complex Optical Surfaces Formed by Replica Molding Against Elastomeric Masters
Xia, Y., Kim, E., Zhao, X.-M., Rogers, J. A., Prentiss, M., & Whitesides, G. M. (1996) · Science · doi:10.1126/science.273.5273.347 · Cited by 643
Krebs, F. C., Fyenbo, J., & Jørgensen, M. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01178a · Cited by 635
Organic Transistors in Optical Displays and Microelectronic Applications
Gelinck, G., Heremans, P., Nomoto, K., & Anthopoulos, T. D. (2010) · Advanced Materials · doi:10.1002/adma.200903559 · Cited by 621
High‐Speed Roll‐to‐Roll Nanoimprint Lithography on Flexible Plastic Substrates
Ahn, S. H., & Guo, L. J. (2008) · Advanced Materials · doi:10.1002/adma.200702650 · Cited by 618
He, Q., Sudibya, H. G., Yin, Z., Wu, S., Li, H., Boey, F., Huang, W., Chen, P., & Zhang, H. (2010) · ACS Nano · doi:10.1021/nn100780v · Cited by 598
Stretchable, Curvilinear Electronics Based on Inorganic Materials
Kim, D., Xiao, J., Song, J., Huang, Y., & Rogers, J. A. (2010) · Advanced Materials · doi:10.1002/adma.200902927 · Cited by 593
Triggering the Sintering of Silver Nanoparticles at Room Temperature
Magdassi, S., Grouchko, M., Berezin, O., & Kamyshny, A. (2010) · ACS Nano · doi:10.1021/nn901868t · Cited by 509
Progress Toward Development of All-Printed RFID Tags: Materials, Processes, and Devices
Subramanian, V., Frechet, J. M. J., Chang, P. C., Huang, D. C., Lee, J. B., Molesa, S. E., Murphy, A. R., Redinger, D. R., & Volkman, S. K. (2005) · Proceedings of the IEEE · doi:10.1109/jproc.2005.850305 · Cited by 507
Fabrication of bulk heterojunction plastic solar cells by screen printing
Shaheen, S. E., Radspinner, R., Peyghambarian, N., & Jabbour, G. E. (2001) · Applied Physics Letters · doi:10.1063/1.1413501 · Cited by 479
Application of Screen Printing in the Fabrication of Organic Light-Emitting Devices
Pardo, D. A., Jabbour, G. E., & Peyghambarian, N. (2000) · Advanced Materials · doi:10.1002/1521-4095(200009)12:17<1249::aid-adma1249>3.0.co;2-y · Cited by 372
Fabrication of three‐dimensional micro‐structures: Microtransfer molding
Zhao, X., Xia, Y., & Whitesides, G. M. (1996) · Advanced Materials · doi:10.1002/adma.19960081016 · Cited by 361
Stability of molded polydimethylsiloxane microstructures
Delamarche, E., Schmid, H., Michel, B., & Biebuyck, H. (1997) · Advanced Materials · doi:10.1002/adma.19970090914 · Cited by 360
Mechanism of Resist Pattern Collapse during Development Process
Tanaka, T., Mitsuaki Morigami, M. M., & Nobufumi Atoda, N. A. (1993) · Japanese Journal of Applied Physics · doi:10.1143/jjap.32.6059 · Cited by 353
Conductive Inks with a “Built-In” Mechanism That Enables Sintering at Room Temperature
Grouchko, M., Kamyshny, A., Mihailescu, C. F., Anghel, D. F., & Magdassi, S. (2011) · ACS Nano · doi:10.1021/nn2005848 · Cited by 331
Large-area flexible 3D optical negative index metamaterial formed by nanotransfer printing
Chanda, D., Shigeta, K., Gupta, S., Cain, T., Carlson, A., Mihi, A., Baca, A. J., Bogart, G. R., Braun, P., & Rogers, J. A. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.82 · Cited by 319
Roller nanoimprint lithography
Tan, H., Gilbertson, A., & Chou, S. Y. (1998) · Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena · doi:10.1116/1.590438 · Cited by 317
Flexible organic electronic devices: Materials, process and applications
Logothetidis, S. (2008) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2008.06.009 · Cited by 316
Inkjet-printed silver tracks: low temperature curing and thermal stability investigation
Perelaer, B. J., de Laat, A. W. M., Hendriks, C. E., & Schubert, U. S. (2008) · Journal of Materials Chemistry · doi:10.1039/b720032c · Cited by 308
An Ultraviolet-Curable Mold for Sub-100-nm Lithography
Choi, S.-J., Yoo, P. J., Baek, S. J., Kim, T. W., & Lee, H. H. (2004) · Journal of the American Chemical Society · doi:10.1021/ja048972k · Cited by 294
Advances in Patterning Materials for 193 nm Immersion Lithography
Sanders, D. P. (2010) · Chemical Reviews · doi:10.1021/cr900244n · Cited by 290
Krebs, F. C., Alstrup, J., Spanggaard, H., Larsen, K., & Kold, E. (2004) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2004.02.031 · Cited by 249
Printed organic transistors for ultra-low-cost RFID applications
Subramanian, V., Chang, P. C., Lee, J. B., Molesa, S. E., & Volkman, S. K. (2005) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2005.859672 · Cited by 242
Meggs' History of Graphic Design
Meggs, P. B., & Purvis, A. W. (1983) · Cited by 212
Synthesis of monodisperse silver nanoparticles for ink-jet printed flexible electronics
Zhang, Z., Zhang, X., Xin, Z., Deng, M., Wen, Y., & Song, Y. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/42/425601 · Cited by 208
Jain, K., Klosner, M., Zemel, M., & Raghunandan, S. (2005) · Proceedings of the IEEE · doi:10.1109/jproc.2005.851505 · Cited by 206
Sub-10 nm patterning using EUV interference lithography
Päivänranta, B., Langner, A., Kirk, E., David, C., & Ekinci, Y. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/37/375302 · Cited by 172
Microchannel deformations due to solvent-induced PDMS swelling
Dangla, R., Gallaire, F., & Baroud, C. N. (2010) · Lab on a Chip · doi:10.1039/c003504a · Cited by 167
Nanoimprinting over topography and multilayer three-dimensional printing
Bao, L.-R., Cheng, X., Huang, X. D., Guo, L. J., Pang, S. W., & Yee, A. F. (2002) · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · doi:10.1116/1.1526355 · Cited by 155
Ji, R., Hornung, M., Verschuuren, M. A., van de Laar, R., van Eekelen, J., Plachetka, U., Moeller, M., & Moormann, C. (2009) · Microelectronic Engineering · doi:10.1016/j.mee.2009.11.134 · Cited by 147
Reversal imprinting by transferring polymer from mold to substrate
Huang, X. D., Bao, L.-R., Cheng, X., Guo, L. J., Pang, S. W., & Yee, A. F. (2002) · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · doi:10.1116/1.1523404 · Cited by 147
Scaling and Optimization of Gravure-Printed Silver Nanoparticle Lines for Printed Electronics
Sung, D., Vornbrock, A. D. L. F., & Subramanian, V. (2009) · IEEE Transactions on Components and Packaging Technologies · doi:10.1109/tcapt.2009.2021464 · Cited by 141
Patterning of micro-scale conductive networks using reel-to-reel flexographic printing
Deganello, D., Cherry, J. A., Gethin, D. T., & Claypole, T. C. (2010) · Thin Solid Films · doi:10.1016/j.tsf.2010.05.125 · Cited by 140
Nanopatterning Soluble Multifunctional Materials by Unconventional Wet Lithography
Cavallini, M., Albonetti, C., & Biscarini, F. (2009) · Advanced Materials · doi:10.1002/adma.200801979 · Cited by 134
Nanotransfer printing of organic and carbon nanotube thin-film transistors on plastic substrates
Hines, D. R., Mezhenny, S., Breban, M., Williams, E. D., Ballarotto, V. W., Esen, G., Southard, A. E., & Fuhrer, M. S. (2005) · Applied Physics Letters · doi:10.1063/1.1901809 · Cited by 125
Fully gravure and ink-jet printed high speed pBTTT organic thin film transistors
Vornbrock, A. D. L. F., Sung, D., Kang, H., et al. (2010) · Organic Electronics · doi:10.1016/j.orgel.2010.09.003 · Cited by 110
Patternable polymer bulk heterojunction photovoltaic cells on plastic by rotogravure printing
Ding, J. M., Vornbrock, A. D. L. F., Ting, C., & Subramanian, V. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.12.003 · Cited by 104
Getting New Technologies Together
(1998) · De Gruyter eBooks · doi:10.1515/9783110810721 · Cited by 99
X-ray lithography: Status, challenges, and outlook for 0.13 μm
Silverman, J. P. (1997) · Journal of Vacuum Science & Technology B Microelectronics and Nanometer Structures Processing Measurement and Phenomena · doi:10.1116/1.589231 · Cited by 99
Ultrafast deep UV Lithography with excimer lasers
Jain, K., Willson, C. G., & Lin, B. J. (1982) · IEEE Electron Device Letters · doi:10.1109/edl.1982.25476 · Cited by 95
Parashkov, R., Becker, E., Ginev, G., et al. (2004) · Journal of Applied Physics · doi:10.1063/1.1636524 · Cited by 94
Organic field-effect transistors and all-polymer integrated circuits
Matters, M., de Leeuw, D. M., Vissenberg, M. C. J. M., Hart, C. M., Herwig, P. T., Geuns, T. C. T., Mutsaers, C. M. J., & Drury, C. J. (1999) · Optical Materials · doi:10.1016/s0925-3467(99)00064-6 · Cited by 91
Sub-100 nm Patterning with an Amorphous Fluoropolymer Mold
Khang, D., & Lee, H. H. (2004) · Langmuir · doi:10.1021/la0358668 · Cited by 89
A parametric study of direct gravure coating
Kapur, N. (2003) · Chemical Engineering Science · doi:10.1016/s0009-2509(03)00136-2 · Cited by 68
Chung, H., Kim, T., Kim, H., Wells, S. A., Jo, S., Ahmed, N., Jung, Y. H., Won, S. M., Bower, C. A., & Rogers, J. A. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100124 · Cited by 67
フレキシブルエレクトロニクスと表示装置:高スループット生産のための高分解能ロール・トー・ロール投影リソグラフィーおよび光アブレーション処理技術
Kanti, J., Klosner, M. A., Marc, Z., & Shyam, R. (2005) · Cited by 63
Recent advances in flexible and stretchable electronics, sensors and power sources
Tok, J. B. ‐., & Bao, Z. (2012) · Science China Chemistry · doi:10.1007/s11426-012-4503-3 · Cited by 58
Patterning of Electrostatic Charge on Electrets Using Hot Microcontact Printing
Zhao, D., Duan, L., Xue, M., Ni, W., & Cao, T. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200902627 · Cited by 54
Printable thin film supercapacitors utilizing single crystal cobalt hydroxidenanosheets
Ji, X., Hallam, P. M., Houssein, S. M., Kadara, R. O., Lang, L., & Banks, C. E. (2011) · RSC Advances · doi:10.1039/c1ra01061a · Cited by 52
Kwak, M. K., Shin, K. H., Yoon, E. Y., & Suh, K. Y. (2009) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2009.11.003 · Cited by 40
Novel roll-to-roll lift-off patterned active-matrix display on flexible polymer substrate
Lo, C., Hiitola‐Keinänen, J., Huttunen, O., Petäjä, J., Hast, J. T., Maaninen, A., Kopola, H. K., Fujita, H., & Toshiyoshi, H. (2009) · Microelectronic Engineering · doi:10.1016/j.mee.2009.02.001 · Cited by 40
Miller, M. S., Filiatrault, H. L., Davidson, G. J. E., Luo, M., & Carmichael, T. B. (2009) · Journal of the American Chemical Society · doi:10.1021/ja908433p · Cited by 29
A modified offset roll printing for thin film transistor applications
Choi, N., Wee, H., Nam, S., Lavelle, J., & Hatalis, M. K. (2011) · Microelectronic Engineering · doi:10.1016/j.mee.2011.11.010 · Cited by 29
OTFT with Silk Screen Printed Drain and Source
Jazairi, I. E. H. E., Trigaud, T., & Moliton, J. P. (2009) · Micro and Nanosystems · doi:10.2174/1876402910901010046 · Cited by 13
Cited by
Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
Khan, S., Lorenzelli, L., & Dahiya, R. S. (2015) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2375203 · Cited by 1,225
Graphene-based materials for flexible supercapacitors
Shao, Y., El-Kady, M. F., Wang, L. J., Zhang, Q., Li, Y., Wang, H., Mousavi, M. F., & Kaner, R. B. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00316k · Cited by 1,154
An Overview of the Development of Flexible Sensors
Han, S., Peng, H., Sun, Q., Venkatesh, S., Chung, K., Lau, S. C., Zhou, Y., & Roy, V. A. L. (2017) · Advanced Materials · doi:10.1002/adma.201700375 · Cited by 771
Inkjet printing wearable electronic devices
Gao, M., Li, L., & Song, Y. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc00038c · Cited by 535
Toward Printed Integrated Circuits based on Unipolar or Ambipolar Polymer Semiconductors
Baeg, K., Caironi, M., & Noh, Y. (2013) · Advanced Materials · doi:10.1002/adma.201205361 · Cited by 522
Metadata
- Authors
- Moonen, P. F., Yakimets, I., & Huskens, J.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2012-08-13
- Volume
- 24
- Issue
- 41
- Pages
- 5526-5541
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2011988252
- Cited by
- 304
- References
- 74
- FWCI
- 15.70
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.