The DOI matches its Crossref record; 185 of the 185 references it cites were found in a registry or an index.
Reviving Lithium‐Metal Anodes for Next‐Generation High‐Energy Batteries
Abstract
Lithium‐metal batteries (LMBs), as one of the most promising next‐generation high‐energy‐density storage devices, are able to meet the rigid demands of new industries. However, the direct utilization of metallic lithium can induce harsh safety issues, inferior rate and cycle performance, or anode pulverization inside the cells. These drawbacks severely hinder the commercialization of LMBs. Here, an up‐to‐date review of the behavior of lithium ions upon deposition/dissolution, and the failure mechanisms of lithium‐metal anodes is presented. It has been shown that the primary causes consist of the growth of lithium dendrites due to large polarization and a strong electric field at the vicinity of the anode, the hyperactivity of metallic lithium, and hostless infinite volume changes upon cycling. The recent advances in liquid organic electrolyte (LOE) systems through modulating the local current density, anion depletion, lithium flux, the anode–electrolyte interface, or the mechanical strength of the interlayers are highlighted. Concrete strategies including tailoring the anode structures, optimizing the electrolytes, building artificial anode–electrolyte interfaces, and functionalizing the protective interlayers are summarized in detail. Furthermore, the challenges remaining in LOE systems are outlined, and the future perspectives of introducing solid‐state electrolytes to radically address safety issues are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Li-ion battery materials: present and future
Nitta, N., Wu, F., Lee, J. T., & Yushin, G. (2015) · Materials Today · doi:10.1016/j.mattod.2014.10.040 · Cited by 7,389
A lithium superionic conductor
Kamaya, N., Homma, K., Yamakawa, Y., Hirayama, M., Kanno, R., Yonemura, M., Kamiyama, T., Kato, Y., Hama, S., Kawamoto, K., et al. (2011) · Nature Materials · doi:10.1038/nmat3066 · Cited by 4,978
A solid future for battery development
Janek, J., & Zeier, W. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.141 · Cited by 3,979
Fast Lithium Ion Conduction in Garnet‐Type Li7La3Zr2O12
Murugan, R., Thangadurai, V., & Weppner, W. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701144 · Cited by 3,250
Nanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
Cited by
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Asenbauer, J., Eisenmann, T., Kuenzel, M., Kazzazi, A., Chen, Z., & Bresser, D. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se00175a · Cited by 1,295
High‐Energy Lithium‐Ion Batteries: Recent Progress and a Promising Future in Applications
Xu, J., Cai, X., Cai, S., Shao, Y., Hu, C., Lu, S., & Ding, S. (2023) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12450 · Cited by 1,201
Recent Progress of the Solid‐State Electrolytes for High‐Energy Metal‐Based Batteries
Fan, L., Wei, S., Li, S., Li, Q., & Lu, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702657 · Cited by 1,179
Lithium–Oxygen Batteries and Related Systems: Potential, Status, and Future
Kwak, W.-J., Rosy, Sharon, D., Xia, C., Kim, H., Johnson, L. R., Bruce, P. G., Nazar, L. F., Sun, Y.-K., Frimer, A. A., et al. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00609 · Cited by 1,009
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Progress and Perspective of Ceramic/Polymer Composite Solid Electrolytes for Lithium Batteries
Li, S., Zhang, S., Shen, L., Liu, Q., Ma, J., Lv, W., He, Y., & Yang, Q. (2020) · Advanced Science · doi:10.1002/advs.201903088 · Cited by 825
Neumann, J., Petranikova, M., Meeus, M., Gamarra, J. D., Younesi, R., Winter, M., & Nowak, S. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202102917 · Cited by 805
Coralloid Carbon Fiber-Based Composite Lithium Anode for Robust Lithium Metal Batteries
Zhang, R., Chen, X., Shen, X., Zhang, X.-Q., Chen, X.-R., Cheng, X.-B., Yan, C., Zhao, C.-Z., & Zhang, Q. (2018) · Joule · doi:10.1016/j.joule.2018.02.001 · Cited by 728
Liu, W., Liu, P., & Mitlin, D. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002297 · Cited by 687
Artificial Soft–Rigid Protective Layer for Dendrite‐Free Lithium Metal Anode
Xu, R., Zhang, X., Cheng, X., Peng, H., Zhao, C., Yan, C., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705838 · Cited by 670
Beyond lithium ion batteries: Higher energy density battery systems based on lithium metal anodes
Shen, X., Liu, H., Cheng, X.-B., Yan, C., & Huang, J.-Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.12.002 · Cited by 653
Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density
Wang, L., Chen, B., Ma, J., Cui, G., & Chen, L. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00322j · Cited by 625
Ionic liquids and derived materials for lithium and sodium batteries
Yang, Q., Zhang, Z., Sun, X.-G., Hu, Y.-S., Xing, H., & Dai, S. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00464h · Cited by 601
Flexible Zn– and Li–air batteries: recent advances, challenges, and future perspectives
Tan, P., Chen, B., Xu, H., Zhang, H., Cai, W., Ni, M., Liu, M., & Shao, Z. (2017) · Energy Environ. Sci. · doi:10.1039/c7ee01913k · Cited by 583
Recent developments and insights into the understanding of Na metal anodes for Na-metal batteries
Zhao, Y., Adair, K. R., & Sun, X. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01373j · Cited by 533
Dual‐Layered Film Protected Lithium Metal Anode to Enable Dendrite‐Free Lithium Deposition
Yan, C., Cheng, X., Tian, Y., Chen, X., Zhang, X., Li, W., Huang, J., & Zhang, Q. (2018) · Advanced Materials · doi:10.1002/adma.201707629 · Cited by 513
Wang, X., Zeng, W., Hong, L., Xu, W., Yang, H., Wang, F., Duan, H., Tang, M., & Jiang, H. (2018) · Nature Energy · doi:10.1038/s41560-018-0104-5 · Cited by 499
Stable Li Metal Anodes via Regulating Lithium Plating/Stripping in Vertically Aligned Microchannels
Wang, S., Yin, Y., Zuo, T., Dong, W., Li, J., Shi, J., Zhang, C., Li, N., Li, C., & Guo, Y. (2017) · Advanced Materials · doi:10.1002/adma.201703729 · Cited by 484
Self-citationLiu, D.-H., Bai, Z., Li, M., Yu, A., Luo, D., Liu, W., Yang, L., Lu, J., Amine, K., & Chen, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00636b · Cited by 483
Zheng, J., Kim, M. S., Tu, Z., Choudhury, S., Tang, T., & Archer, L. A. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00883g · Cited by 466
Supercapattery: Merging of battery-supercapacitor electrodes for hybrid energy storage devices
Iqbal, M. Z., & Aziz, U. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2021.103823 · Cited by 457
Recent Advances in Heterostructure Engineering for Lithium–Sulfur Batteries
Huang, S., Wang, Z., Von Lim, Y., Wang, Y., Li, Y., Zhang, D., & Yang, H. Y. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003689 · Cited by 438
Langmuir–Blodgett artificial solid-electrolyte interphases for practical lithium metal batteries
Kim, M. S., Ryu, J.-H., Deepika, Lim, Y. R., Nah, I. W., Lee, K.-R., Archer, L. A., & Il Cho, W. (2018) · Nature Energy · doi:10.1038/s41560-018-0237-6 · Cited by 417
Liu, S., Li, J., Yan, X., Su, Q., Lu, Y., Qiu, J., Wang, Z., Lin, X., Huang, J., Liu, R., et al. (2018) · Advanced Materials · doi:10.1002/adma.201706895 · Cited by 404
Toward Green Battery Cells: Perspective on Materials and Technologies
Dühnen, S., Betz, J., Kolek, M., Schmuch, R., Winter, M., & Placke, T. (2020) · Small Methods · doi:10.1002/smtd.202000039 · Cited by 395
Ren, W., Ding, C., Fu, X., & Huang, Y. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.10.018 · Cited by 385
Li, C., Liu, S., Shi, C., Liang, G., Lu, Z., Fu, R., & Wu, D. (2019) · Nature Communications · doi:10.1038/s41467-019-09211-z · Cited by 384
A Chronicle Review of Nonsilicon (Sn, Sb, Ge)‐Based Lithium/Sodium‐Ion Battery Alloying Anodes
Liang, S., Cheng, Y., Zhu, J., Xia, Y., & Müller‐Buschbaum, P. (2020) · Small Methods · doi:10.1002/smtd.202000218 · Cited by 383
Key Aspects of Lithium Metal Anodes for Lithium Metal Batteries
Ghazi, Z. A., Sun, Z., Sun, C., Qi, F., An, B., Li, F., & Cheng, H. (2019) · Small · doi:10.1002/smll.201900687 · Cited by 382
Zhang, L., Yang, T., Du, C., Liu, Q., Tang, Y., Zhao, J., Wang, B., Chen, T., Sun, Y., Jia, P., et al. (2020) · Nature Nanotechnology · doi:10.1038/s41565-019-0604-x · Cited by 375
Self-citationZou, P., Sui, Y., Zhan, H., Wang, C., Xin, H. L., Cheng, H.-M., Kang, F., & Yang, C. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01100 · Cited by 368
Lithium Nitrate Regulated Sulfone Electrolytes for Lithium Metal Batteries
Fu, J., Ji, X., Chen, J., Chen, L., Fan, X., Mu, D., & Wang, C. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202009575 · Cited by 358
Designing Safe Electrolyte Systems for a High‐Stability Lithium–Sulfur Battery
Chen, W., Lei, T., Wu, C., Deng, M., Gong, C., Hu, K., Ma, Y., Dai, L., Lv, W., He, W., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702348 · Cited by 356
Eshetu, G. G., Judez, X., Li, C., Martinez-Ibañez, M., Gracia, I., Bondarchuk, O., Carrasco, J., Rodriguez-Martinez, L. M., Zhang, H., & Armand, M. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b04612 · Cited by 351
Nanoengineering Carbon Spheres as Nanoreactors for Sustainable Energy Applications
Tian, H., Liang, J., & Liu, J. (2019) · Advanced Materials · doi:10.1002/adma.201903886 · Cited by 348
Advanced nanostructured carbon-based materials for rechargeable lithium-sulfur batteries
Zhang, L., Wang, Y., Niu, Z., & Chen, J. (2019) · Carbon · doi:10.1016/j.carbon.2018.09.067 · Cited by 343
Recent progress of separators in lithium-sulfur batteries
Li, C., Liu, R., Xiao, Y., Cao, F., & Zhang, H. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.05.034 · Cited by 343
Regulating Li deposition by constructing LiF-rich host for dendrite-free lithium metal anode
Yuan, Y., Wu, F., Bai, Y., Li, Y., Chen, G., Wang, Z., & Wu, C. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.06.022 · Cited by 327
Biomass-based materials for green lithium secondary batteries
Jin, C., Nai, J., Sheng, O., Yuan, H., Zhang, W., Tao, X., & Lou, X. W. (. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02848g · Cited by 324
Perspectives for restraining harsh lithium dendrite growth: Towards robust lithium metal anodes
Wu, F., Yuan, Y.-X., Cheng, X.-B., Bai, Y., Li, Y., Wu, C., & Zhang, Q. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.03.024 · Cited by 319
Synergistic Dual‐Additive Electrolyte Enables Practical Lithium‐Metal Batteries
Li, S., Zhang, W., Wu, Q., Fan, L., Wang, X., Wang, X., Shen, Z., He, Y., & Lu, Y. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202004853 · Cited by 318
An Autotransferable g‐C3N4 Li+‐Modulating Layer toward Stable Lithium Anodes
Guo, Y., Niu, P., Liu, Y., Ouyang, Y., Li, D., Zhai, T., Li, H., & Cui, Y. (2019) · Advanced Materials · doi:10.1002/adma.201900342 · Cited by 314
Self-citationHuang, G., Han, J., Zhang, F., Wang, Z., Kashani, H., Watanabe, K., & Chen, M. (2019) · Advanced Materials · doi:10.1002/adma.201805334 · Cited by 313
Lithium–Graphite Paste: An Interface Compatible Anode for Solid‐State Batteries
Duan, J., Wu, W., Nolan, A. M., Wang, T., Wen, J., Hu, C., Mo, Y., Luo, W., & Huang, Y. (2019) · Advanced Materials · doi:10.1002/adma.201807243 · Cited by 310
Advances in the Design of 3D‐Structured Electrode Materials for Lithium‐Metal Anodes
Park, S., Jin, H., & Yun, Y. S. (2020) · Advanced Materials · doi:10.1002/adma.202002193 · Cited by 301
A “cation-anion regulation” synergistic anode host for dendrite-free lithium metal batteries
Zhang, W., Zhuang, H. L., Fan, L., Gao, L., & Lu, Y. (2018) · Science Advances · doi:10.1126/sciadv.aar4410 · Cited by 299
3D TiC/C Core/Shell Nanowire Skeleton for Dendrite‐Free and Long‐Life Lithium Metal Anode
Liu, S., Xia, X., Zhong, Y., Deng, S., Yao, Z., Zhang, L., Cheng, X., Wang, X., Zhang, Q., & Tu, J. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702322 · Cited by 292
Zheng, B., Lin, X., Zhang, X., Wu, D., & Matyjaszewski, K. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201907006 · Cited by 291
Advances in Interfaces between Li Metal Anode and Electrolyte
Zhang, X., Cheng, X., & Zhang, Q. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201701097 · Cited by 287
Dai, H., Xi, K., Liu, X., Lai, C., & Zhang, S. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b08963 · Cited by 283
Wang, X., Wang, S., Wang, H., Tu, W., Zhao, Y., Li, S., Liu, Q., Wu, J., Fu, Y., Han, C., et al. (2021) · Advanced Materials · doi:10.1002/adma.202007945 · Cited by 283
Toward Practical High‐Energy‐Density Lithium–Sulfur Pouch Cells: A Review
Chen, Z., Zhao, M., Hou, L., Zhang, X., Li, B., & Huang, J. (2022) · Advanced Materials · doi:10.1002/adma.202201555 · Cited by 282
Cheng, Z., Liu, T., Zhao, B., Shen, F., Jin, H., & Han, X. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.09.016 · Cited by 280
Cathode Kinetics Evaluation in Lean-Electrolyte Lithium–Sulfur Batteries
Chen, Z.-X., Cheng, Q., Li, X.-Y., Li, Z., Song, Y.-W., Sun, F., Zhao, M., Zhang, X.-Q., Li, B.-Q., & Huang, J.-Q. (2023) · Journal of the American Chemical Society · doi:10.1021/jacs.3c02786 · Cited by 279
Optimize Lithium Deposition at Low Temperature by Weakly Solvating Power Solvent
Ma, T., Ni, Y., Wang, Q., Zhang, W., Jin, S., Zheng, S., Yang, X., Hou, Y., Tao, Z., & Chen, J. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202207927 · Cited by 278
Review—Li Metal Anode in Working Lithium-Sulfur Batteries
Cheng, X.-B., Huang, J.-Q., & Zhang, Q. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0111801jes · Cited by 277
Protecting the Li‐Metal Anode in a Li–O2 Battery by using Boric Acid as an SEI‐Forming Additive
Huang, Z., Ren, J., Zhang, W., Xie, M., Li, Y., Sun, D., Shen, Y., & Huang, Y. (2018) · Advanced Materials · doi:10.1002/adma.201803270 · Cited by 275
An advance review of solid-state battery: Challenges, progress and prospects
Li, C., Wang, Z.-Y., He, Z.-J., Li, Y.-J., Mao, J., Dai, K.-H., Yan, C., & Zheng, J.-C. (2021) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2021.e00297 · Cited by 273
Boaretto, N., Garbayo, I., Valiyaveettil-SobhanRaj, S., Quintela, A., Li, C., Casas-Cabanas, M., & Aguesse, F. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.229919 · Cited by 271
Engineering of lithium-metal anodes towards a safe and stable battery
Wang, L., Zhou, Z., Yan, X., Hou, F., Wen, L., Luo, W., Liang, J., & Dou, S. X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.014 · Cited by 270
Alkali Metal Anodes for Rechargeable Batteries
Wang, H., Yu, D., Kuang, C., Cheng, L., Li, W., Feng, X., Zhang, Z., Zhang, X., & Zhang, Y. (2019) · Chem · doi:10.1016/j.chempr.2018.11.005 · Cited by 266
Strategies to Solve Lithium Battery Thermal Runaway: From Mechanism to Modification
Kong, L., Li, Y., & Feng, W. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-021-00109-3 · Cited by 265
Zhao, C., Zhao, Q., Liu, X., Zheng, J., Stalin, S., Zhang, Q., & Archer, L. A. (2020) · Advanced Materials · doi:10.1002/adma.201905629 · Cited by 261
Recent progress on electrolyte additives for stable lithium metal anode
Li, S., Luo, Z., Li, L., Hu, J., Zou, G., Hou, H., & Ji, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.07.008 · Cited by 256
Shangguan, X., Xu, G., Cui, Z., Wang, Q., Du, X., Chen, K., Huang, S., Jia, G., Li, F., Wang, X., et al. (2019) · Small · doi:10.1002/smll.201900269 · Cited by 194
Investigation of the temperature-dependent behaviours of Li metal anode
Guo, Y., Li, D., Xiong, R., & Li, H. (2019) · Chemical Communications · doi:10.1039/c9cc04897a · Cited by 49
Self-citationWei, C., Ruan, J., Song, Z., Chen, X., Wang, D., Jiang, J., Wang, X., Zhou, A., Zou, W., & Li, J. (2023) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2023.170643 · Cited by 14
Metadata
- Authors
- Guo, Y., Li, H., & Zhai, T.
- Venue
- Advanced Materials
- Publisher
- Wiley
- Published
- 2017-06-06
- Volume
- 29
- Issue
- 29
- ISSN
- 0935-9648 (ISSN-L)
- 1521-4095
- OpenAlex
- W2621553322
- Cited by
- 1,215
- References
- 185
- FWCI
- 49.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.