The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Lithium–Sulfur Cells: The Gap between the State‐of‐the‐Art and the Requirements for High Energy Battery Cells
Open accessAbstract
Li–S cells are considered a highly attractive electrochemical storage system, especially due to their high potential gravimetric energy density. The long‐term target of all Li–S research activities must be to outperform state‐of‐the‐art Li‐ion cells. A current benchmark is the Panasonic NCR18650B, which has a gravimetric energy density of ≈240 Wh kg−1 and several hundred relatively stable cycles. The possible 18650 Li–S cell energies and cell costs are calculated for various sulfur loads, sulfur utilizations, and electrolyte/sulfur ratios with the aim of determining the cell and electrode property values required to outperform the NCR18650B. These values are compared with statistical information obtained from an extensive literature review of 274 Li–S publications over the last 12 years to show the gap between state‐of‐the‐art Li–S research and requirements for high energy density cells. Finally, a carbon nanotubes‐based electrode is introduced, which meets important criteria for obtaining high gravimetric cell energy densities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
Su, Y.-S., & Manthiram, A. (2012) · Chemical Communications · doi:10.1039/c2cc33945e · Cited by 755
New Nanostructured Li2S/Silicon Rechargeable Battery with High Specific Energy
Yang, Y., McDowell, M. T., Jackson, A., Cha, J. J., Hong, S. S., & Cui, Y. (2010) · Nano Letters · doi:10.1021/nl100504q · Cited by 653
Recent advances in lithium–sulfur batteries
Chen, L., & Shaw, L. L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.111 · Cited by 432
A review of electrolytes for lithium–sulphur batteries
Scheers, J., Fantini, S., & Johansson, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.023 · Cited by 429
Lin, Y.-M., Klavetter, K. C., Abel, P. R., Davy, N. C., Snider, J. L., Heller, A., & Mullins, C. B. (2012) · Chemical Communications · doi:10.1039/c2cc31712e · Cited by 290
Reduced polysulfide shuttle in lithium–sulfur batteries using Nafion-based separators
Bauer, I., Thieme, S., Brückner, J., Althues, H., & Kaskel, S. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.090 · Cited by 288
Rechargeable lithium/sulfur battery with suitable mixed liquid electrolytes
Choi, J.-W., Kim, J.-K., Cheruvally, G., Ahn, J.-H., Ahn, H.-J., & Kim, K.-W. (2007) · Electrochimica Acta · doi:10.1016/j.electacta.2006.08.016 · Cited by 246
Cited by
Performance and cost of materials for lithium-based rechargeable automotive batteries
Schmuch, R., Wagner, R., Hörpel, G., Placke, T., & Winter, M. (2018) · Nature Energy · doi:10.1038/s41560-018-0107-2 · Cited by 3,233
Batteries and fuel cells for emerging electric vehicle markets
Cano, Z. P., Banham, D., Ye, S., Hintennach, A., Lu, J., Fowler, M., & Chen, Z. (2018) · Nature Energy · doi:10.1038/s41560-018-0108-1 · Cited by 2,873
Lithium-ion batteries: outlook on present, future, and hybridized technologies
Kim, T., Song, W., Son, D.-Y., Ono, L. K., & Qi, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta10513h · Cited by 2,479
More Reliable Lithium‐Sulfur Batteries: Status, Solutions and Prospects
Fang, R., Zhao, S., Sun, Z., Wang, D., Cheng, H., & Li, F. (2017) · Advanced Materials · doi:10.1002/adma.201606823 · Cited by 1,785
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Application of Ionic Liquids to Energy Storage and Conversion Materials and Devices
Watanabe, M., Thomas, M. L., Zhang, S., Ueno, K., Yasuda, T., & Dokko, K. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00504 · Cited by 1,667
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Transition of lithium growth mechanisms in liquid electrolytes
Bai, P., Li, J., Brushett, F. R., & Bazant, M. Z. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01674j · Cited by 1,591
Duffner, F., Kronemeyer, N., Tübke, J., Leker, J., Winter, M., & Schmuch, R. (2021) · Nature Energy · doi:10.1038/s41560-020-00748-8 · Cited by 1,335
Self-citationPlacke, T., Kloepsch, R., Dühnen, S., & Winter, M. (2017) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-017-3610-7 · Cited by 1,117
A Perspective toward Practical Lithium–Sulfur Batteries
Zhao, M., Li, B.-Q., Zhang, X.-Q., Huang, J.-Q., & Zhang, Q. (2020) · ACS Central Science · doi:10.1021/acscentsci.0c00449 · Cited by 858
High-energy lithium metal pouch cells with limited anode swelling and long stable cycles
Niu, C., Lee, H., Chen, S., Li, Q., Du, J., Xu, W., Zhang, J.-G., Whittingham, M. S., Xiao, J., & Liu, J. (2019) · Nature Energy · doi:10.1038/s41560-019-0390-6 · Cited by 732
Lithium Metal Anodes with Nonaqueous Electrolytes
Zhang, J.-G., Xu, W., Xiao, J., Cao, X., & Liu, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00275 · Cited by 730
Revisiting the Role of Polysulfides in Lithium–Sulfur Batteries
Li, G., Wang, S., Zhang, Y., Li, M., Chen, Z., & Lu, J. (2018) · Advanced Materials · doi:10.1002/adma.201705590 · Cited by 711
Lithium–Sulfur Batteries under Lean Electrolyte Conditions: Challenges and Opportunities
Zhao, M., Li, B., Peng, H., Yuan, H., Wei, J., & Huang, J. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201909339 · Cited by 663
Enhanced Electrochemical Kinetics on Conductive Polar Mediators for Lithium–Sulfur Batteries
Peng, H., Zhang, G., Chen, X., Zhang, Z., Xu, W., Huang, J., & Zhang, Q. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201605676 · Cited by 649
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Bridging the academic and industrial metrics for next-generation practical batteries
Cao, Y., Li, M., Lu, J., Liu, J., & Amine, K. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0371-8 · Cited by 612
Xue, W., Shi, Z., Suo, L., Wang, C., Wang, Z., Wang, H., So, K. P., Maurano, A., Yu, D., Chen, Y., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0351-0 · Cited by 591
A Cooperative Interface for Highly Efficient Lithium–Sulfur Batteries
Peng, H., Zhang, Z., Huang, J., Zhang, G., Xie, J., Xu, W., Shi, J., Chen, X., Cheng, X., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201603401 · Cited by 583
Lin, F., Liu, Y., Yu, X., Cheng, L., Singer, A., Shpyrko, O. G., Xin, H. L., Tamura, N., Tian, C., Weng, T.-C., et al. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00007 · Cited by 582
Critical Parameters for Evaluating Coin Cells and Pouch Cells of Rechargeable Li-Metal Batteries
Chen, S., Niu, C., Lee, H., Li, Q., Yu, L., Xu, W., Zhang, J.-G., Dufek, E. J., Whittingham, M. S., Meng, S., et al. (2019) · Joule · doi:10.1016/j.joule.2019.02.004 · Cited by 531
Review—Electromobility: Batteries or Fuel Cells?
Gröger, O., Gasteiger, H. A., & Suchsland, J.-P. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0211514jes · Cited by 529
Sulfur and Its Role In Modern Materials Science
Boyd, D. A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201604615 · Cited by 512
Battery cost forecasting: a review of methods and results with an outlook to 2050
Mauler, L., Duffner, F., Zeier, W. G., & Leker, J. (2021) · Energy & Environmental Science · doi:10.1039/d1ee01530c · Cited by 499
Progress on the Critical Parameters for Lithium–Sulfur Batteries to be Practically Viable
Chung, S., Chang, C., & Manthiram, A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201801188 · Cited by 477
Positioning Organic Electrode Materials in the Battery Landscape
Liang, Y., & Yao, Y. (2018) · Joule · doi:10.1016/j.joule.2018.07.008 · Cited by 470
Carbon nanomaterials for advanced lithium sulfur batteries
Xu, Z.-L., Kim, J.-K., & Kang, K. (2018) · Nano Today · doi:10.1016/j.nantod.2018.02.006 · Cited by 454
A Review of Functional Binders in Lithium–Sulfur Batteries
Yuan, H., Huang, J., Peng, H., Titirici, M., Xiang, R., Chen, R., Liu, Q., & Zhang, Q. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201802107 · Cited by 438
Calcium‐Ion Batteries: Current State‐of‐the‐Art and Future Perspectives
Gummow, R. J., Vamvounis, G., Kannan, M. B., & He, Y. (2018) · Advanced Materials · doi:10.1002/adma.201801702 · Cited by 431
Rational Design of Nanostructured Functional Interlayer/Separator for Advanced Li–S Batteries
Jeong, Y. C., Kim, J. H., Nam, S., Park, C. R., & Yang, S. J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707411 · Cited by 429
Perspective on Performance, Cost, and Technical Challenges for Practical Dual-Ion Batteries
Placke, T., Heckmann, A., Schmuch, R., Meister, P., Beltrop, K., & Winter, M. (2018) · Joule · doi:10.1016/j.joule.2018.09.003 · Cited by 428
Xu, J., Zhang, W., Fan, H., Cheng, F., Su, D., & Wang, G. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.06.046 · Cited by 422
Structural Design of Lithium–Sulfur Batteries: From Fundamental Research to Practical Application
Yang, X., Li, X., Adair, K., Zhang, H., & Sun, X. (2018) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0010-3 · Cited by 411
Li-S Batteries: Challenges, Achievements and Opportunities
Raza, H., Bai, S., Cheng, J., Majumder, S., Zhu, H., Liu, Q., Zheng, G., Li, X., & Chen, G. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00188-4 · Cited by 406
Pan, H., Chen, J., Cao, R., Murugesan, V., Rajput, N. N., Han, K. S., Persson, K., Estevez, L., Engelhard, M. H., Zhang, J.-G., et al. (2017) · Nature Energy · doi:10.1038/s41560-017-0005-z · Cited by 402
Strategies toward High‐Loading Lithium–Sulfur Battery
Hu, Y., Chen, W., Lei, T., Jiao, Y., Huang, J., Hu, A., Gong, C., Yan, C., Wang, X., & Xiong, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000082 · Cited by 402
Rational design of two-dimensional nanomaterials for lithium–sulfur batteries
Jana, M., Xu, R., Cheng, X.-B., Yeon, J. S., Park, J. M., Huang, J.-Q., Zhang, Q., & Park, H. S. (2020) · Energy & Environmental Science · doi:10.1039/c9ee02049g · Cited by 393
Betz, J., Bieker, G., Meister, P., Placke, T., Winter, M., & Schmuch, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803170 · Cited by 390
Graphene‐Based Nanocomposites for Energy Storage
Ji, L., Meduri, P., Agubra, V., Xiao, X., & Alcoutlabi, M. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502159 · Cited by 385
Chen, W., Qian, T., Xiong, J., Xu, N., Liu, X., Liu, J., Zhou, J., Shen, X., Yang, T., Chen, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201605160 · Cited by 382
An Overview of Parameter and Cost for Battery Electric Vehicles
König, A., Nicoletti, L., Schröder, D., Wolff, S., Waclaw, A., & Lienkamp, M. (2021) · World Electric Vehicle Journal · doi:10.3390/wevj12010021 · Cited by 363
Chen, S., Dai, F., & Cai, M. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01545 · Cited by 362
Holtstiege, F., Bärmann, P., Nölle, R., Winter, M., & Placke, T. (2018) · Batteries · doi:10.3390/batteries4010004 · Cited by 357
Zhuang, T., Huang, J., Peng, H., He, L., Cheng, X., Chen, C., & Zhang, Q. (2016) · Small · doi:10.1002/smll.201503133 · Cited by 346
Zhang, W., Lu, J., & Guo, Z. (2021) · Materials Today · doi:10.1016/j.mattod.2021.03.015 · Cited by 336
Gunnarsdóttir, A. B., Amanchukwu, C. V., Menkin, S., & Grey, C. P. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c10258 · Cited by 326
A high-entropy metal oxide as chemical anchor of polysulfide for lithium-sulfur batteries
Zheng, Y., Yi, Y., Fan, M., Liu, H., Li, X., Zhang, R., Li, M., & Qiao, Z.-A. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.02.030 · Cited by 315
Ampere-hour-scale zinc–air pouch cells
Shinde, S. S., Jung, J. Y., Wagh, N. K., Lee, C. H., Kim, D.-H., Kim, S.-H., Lee, S. U., & Lee, J.-H. (2021) · Nature Energy · doi:10.1038/s41560-021-00807-8 · Cited by 311
Rana, M., Ahad, S. A., Li, M., Luo, B., Wang, L., Gentle, I., & Knibbe, R. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2018.12.024 · Cited by 301
A Compact Nanoconfined Sulfur Cathode for High-Performance Lithium-Sulfur Batteries
Li, Z., Guan, B. Y., Zhang, J., & Lou, X. W. (. (2017) · Joule · doi:10.1016/j.joule.2017.06.003 · Cited by 295
Chemali, E., Preindl, M., Malysz, P., & Emadi, A. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2566583 · Cited by 291
Li, G., Lei, W., Luo, D., Deng, Y., Deng, Z., Wang, D., Yu, A., & Chen, Z. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01377b · Cited by 283
Progress and Perspective of Solid‐State Lithium–Sulfur Batteries
Lei, D., Shi, K., Ye, H., Wan, Z., Wang, Y., Shen, L., Li, B., Yang, Q., Kang, F., & He, Y. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707570 · Cited by 282
Toward Practical High‐Energy‐Density Lithium–Sulfur Pouch Cells: A Review
Chen, Z., Zhao, M., Hou, L., Zhang, X., Li, B., & Huang, J. (2022) · Advanced Materials · doi:10.1002/adma.202201555 · Cited by 282
McCloskey, B. D. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01814 · Cited by 281
A Toolbox for Lithium–Sulfur Battery Research: Methods and Protocols
Zhang, G., Zhang, Z., Peng, H., Huang, J., & Zhang, Q. (2017) · Small Methods · doi:10.1002/smtd.201700134 · Cited by 260
Peng, H., Xu, W., Zhu, L., Wang, D., Huang, J., Cheng, X., Yuan, Z., Wei, F., & Zhang, Q. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201602071 · Cited by 256
Yan, C., Cheng, X.-B., Zhao, C.-Z., Huang, J.-Q., Yang, S.-T., & Zhang, Q. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.056 · Cited by 255
Li, M., Carter, R., Douglas, A., Oakes, L., & Pint, C. L. (2017) · ACS Nano · doi:10.1021/acsnano.7b01437 · Cited by 254
Recent research trends in Li–S batteries
Kumar, R., Liu, J., Hwang, J.-Y., & Sun, Y.-K. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta01483c · Cited by 254
Lithium-Sulfur Battery Technology Readiness and Applications—A Review
Fotouhi, A., Auger, D., O’Neill, L., Cleaver, T., & Walus, S. (2017) · Energies · doi:10.3390/en10121937 · Cited by 180
Mueller, J.-K., Bensmann, A., Bensmann, B., Fischer, T., Kadyk, T., Narjes, G., Kauth, F., Ponick, B., Seume, J., Krewer, U., et al. (2018) · Energies · doi:10.3390/en11010179 · Cited by 17
Metadata
- Authors
- Hagen, M., Hanselmann, D., Ahlbrecht, K., Maça, R., Gerber, D., & Tübke, J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2015-04-11
- Volume
- 5
- Issue
- 16
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2122141541
- Cited by
- 636
- References
- 16
- FWCI
- 33.84
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.