The DOI matches its Crossref record; 117 of the 117 references it cites were found in a registry or an index.
Anodes for Rechargeable Lithium‐Sulfur Batteries
Abstract
With the significant progress that has been made toward the development of cathode materials and electrolytes in lithium‐sulfur (Li‐S) batteries in recent years, the stability of the anode in Li‐S batteries has become one of the more urgent challenges in order to reach long‐term stability of Li‐S batteries. In Li‐S batteries, a passivation layer is easily formed on the metallic Li anode surface because of the presence of polysulfides and electrolyte additives. Although the passivation layer on the Li metal anode can significantly suppress Li dendrite growth and improve the safety of Li‐S batteries, continuous corrosion of the Li metal anode eventually leads to battery failure due to the increased cell impedance and the depletion of electrolyte. Here, the recent developments on the protection of the Li metal anode in Li‐S batteries are reviewed. Various strategies used to minimize the corrosion of Li anodes and to reduce its impedance increase are analyzed. Other alternative anodes used in sulfur‐based rechargeable batteries are also discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
Lithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Electrochemical Energy Storage for Green Grid
Yang, Z., Zhang, J., Kintner-Meyer, M. C. W., Lu, X., Choi, D., Lemmon, J. P., & Liu, J. (2011) · Chemical Reviews · doi:10.1021/cr100290v · Cited by 5,250
Self-citationLithium Batteries: Status, Prospects and Future
Scrosati, B., & Garche, J. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.048 · Cited by 5,153
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Self-citationRechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries
Verma, P., Maire, P., & Novák, P. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.05.072 · Cited by 2,903
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Wu, H., Chan, G., Choi, J. W., Ryu, I., Yao, Y., McDowell, M. T., Lee, S. W., Jackson, A., Yang, Y., Hu, L., et al. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.35 · Cited by 2,478
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
A review of the electrochemical performance of alloy anodes for lithium-ion batteries
Zhang, W.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.07.020 · Cited by 2,140
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Dendrite-Free Lithium Deposition via Self-Healing Electrostatic Shield Mechanism
Ding, F., Xu, W., Graff, G. L., Zhang, J., Sushko, M. L., Chen, X., Shao, Y., Engelhard, M. H., Nie, Z., Xiao, J., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja312241y · Cited by 2,107
Self-citationWei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Review on recent progress of nanostructured anode materials for Li-ion batteries
Goriparti, S., Miele, E., De Angelis, F., Di Fabrizio, E., Proietti Zaccaria, R., & Capiglia, C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.103 · Cited by 2,092
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Interconnected hollow carbon nanospheres for stable lithium metal anodes
Zheng, G., Lee, S. W., Liang, Z., Lee, H.-W., Yan, K., Yao, H., Wang, H., Li, W., Chu, S., & Cui, Y. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.152 · Cited by 1,764
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644
A realizable renewable energy future
Turner, J. A. (1999) · Science · doi:10.1126/science.285.5428.687 · Cited by 1,642
Silicon‐Based Nanomaterials for Lithium‐Ion Batteries: A Review
Su, X., Wu, Q., Li, J., Xiao, X., Lott, A., Lu, W., Sheldon, B. W., & Wu, J. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300882 · Cited by 1,593
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
Li, X., Gu, M., Hu, S., Kennard, R., Yan, P., Chen, X., Wang, C., Sailor, M. J., Zhang, J.-G., & Liu, J. (2014) · Nature Communications · doi:10.1038/ncomms5105 · Cited by 1,406
Self-citationNew Approaches for High Energy Density Lithium–Sulfur Battery Cathodes
Evers, S., & Nazar, L. F. (2013) · Accounts of Chemical Research · doi:10.1021/ar3001348 · Cited by 1,324
Pang, Q., Kundu, D., Cuisinier, M., & Nazar, L. F. (2014) · Nature Communications · doi:10.1038/ncomms5759 · Cited by 1,318
Materials Challenges and Opportunities of Lithium Ion Batteries
Manthiram, A. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz1015422 · Cited by 1,065
Metallic anodes for next generation secondary batteries
Kim, H., Jeong, G., Kim, Y.-U., Kim, J.-H., Park, C.-M., & Sohn, H.-J. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60177c · Cited by 1,010
A Graphene–Pure‐Sulfur Sandwich Structure for Ultrafast, Long‐Life Lithium–Sulfur Batteries
Zhou, G., Pei, S., Li, L., Wang, D., Wang, S., Huang, K., Yin, L., Li, F., & Cheng, H. (2014) · Advanced Materials · doi:10.1002/adma.201302877 · Cited by 997
Role of LiNO3 in rechargeable lithium/sulfur battery
Zhang, S. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.081 · Cited by 947
Barchasz, C., Molton, F., Duboc, C., Leprêtre, J.-C., Patoux, S., & Alloin, F. (2012) · Analytical Chemistry · doi:10.1021/ac2032244 · Cited by 946
Evolution of Strategies for Modern Rechargeable Batteries
Goodenough, J. B. (2013) · Accounts of Chemical Research · doi:10.1021/ar2002705 · Cited by 859
Three‐Dimensional Porous Silicon Particles for Use in High‐Performance Lithium Secondary Batteries
Kim, H., Han, B., Choo, J., & Cho, J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200804355 · Cited by 851
Carbon anode materials for lithium ion batteries
Wu, Y. P., Rahm, E., & Holze, R. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00596-7 · Cited by 775
Failure Mechanism for Fast‐Charged Lithium Metal Batteries with Liquid Electrolytes
Lu, D., Shao, Y., Lozano, T., Bennett, W. D., Graff, G. L., Polzin, B., Zhang, J., Engelhard, M. H., Saenz, N. T., Henderson, W. A., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201400993 · Cited by 740
Self-citationIonic shield for polysulfides towards highly-stable lithium–sulfur batteries
Huang, J.-Q., Zhang, Q., Peng, H.-J., Liu, X.-Y., Qian, W.-Z., & Wei, F. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42223b · Cited by 679
New Nanostructured Li2S/Silicon Rechargeable Battery with High Specific Energy
Yang, Y., McDowell, M. T., Jackson, A., Cha, J. J., Hong, S. S., & Cui, Y. (2010) · Nano Letters · doi:10.1021/nl100504q · Cited by 653
Challenges for rechargeable batteries
Goodenough, J. B., & Kim, Y. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.074 · Cited by 636
Gao, J., Lowe, M. A., Kiya, Y., & Abruña, H. D. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp207714c · Cited by 600
Song, M.-K., Park, S., Alamgir, F. M., Cho, J., & Liu, M. (2011) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2011.06.001 · Cited by 540
Lithium/sulfur batteries with high specific energy: old challenges and new opportunities
Song, M.-K., Cairns, E. J., & Zhang, Y. (2013) · Nanoscale · doi:10.1039/c2nr33044j · Cited by 522
Chung, S., & Manthiram, A. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400845 · Cited by 516
Recent progress and remaining challenges in sulfur-based lithium secondary batteries – a review
Bresser, D., Passerini, S., & Scrosati, B. (2013) · Chemical Communications · doi:10.1039/c3cc46131a · Cited by 514
Improved cycling performances of lithium sulfur batteries with LiNO3-modified electrolyte
Liang, X. M., Wen, Z., Liu, Y., Wu, M., Jin, J. H., Zhang, H., & Wu, X. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.027 · Cited by 506
Lithium-ion rechargeable batteries
Megahed, S., & Scrosati, B. (1994) · Journal of Power Sources · doi:10.1016/0378-7753(94)01956-8 · Cited by 499
Li, Z., Yuan, L., Yi, Z., Sun, Y., Liu, Y., Jiang, Y., Shen, Y., Xin, Y., Zhang, Z., & Huang, Y. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301473 · Cited by 481
Electrochemical performance of lithium/sulfur cells with three different polymer electrolytes
Marmorstein, D., Yu, T. H., Striebel, K. A., McLarnon, F. R., Hou, J., & Cairns, E. J. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00432-8 · Cited by 451
Phosphorous Pentasulfide as a Novel Additive for High‐Performance Lithium‐Sulfur Batteries
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200696 · Cited by 450
A High‐Performance Polymer Tin Sulfur Lithium Ion Battery
Hassoun, J., & Scrosati, B. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200907324 · Cited by 433
Recent advances in lithium–sulfur batteries
Chen, L., & Shaw, L. L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.111 · Cited by 432
A review of electrolytes for lithium–sulphur batteries
Scheers, J., Fantini, S., & Johansson, P. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.023 · Cited by 429
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.041 · Cited by 414
Yao, H., Zheng, G., Hsu, P.-C., Kong, D., Cha, J. J., Li, W., Seh, Z. W., McDowell, M. T., Yan, K., Liang, Z., et al. (2014) · Nature Communications · doi:10.1038/ncomms4943 · Cited by 398
High-Performance Li–S Batteries with an Ultra-lightweight MWCNT-Coated Separator
Chung, S.-H., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5006913 · Cited by 393
A membrane-free lithium/polysulfide semi-liquid battery for large-scale energy storage
Yang, Y., Zheng, G., & Cui, Y. (2013) · Energy & Environmental Science · doi:10.1039/c3ee00072a · Cited by 390
Lithium Superionic Sulfide Cathode for All-Solid Lithium–Sulfur Batteries
Lin, Z., Liu, Z., Dudney, N. J., & Liang, C. (2013) · ACS Nano · doi:10.1021/nn400391h · Cited by 378
Carbonized Eggshell Membrane as a Natural Polysulfide Reservoir for Highly Reversible Li‐S Batteries
Chung, S., & Manthiram, A. (2014) · Advanced Materials · doi:10.1002/adma.201304365 · Cited by 375
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.07.118 · Cited by 371
Historical development of secondary lithium batteries
BRANDT, K. (1994) · Solid State Ionics · doi:10.1016/0167-2738(94)90408-1 · Cited by 366
Miao, R., Yang, J., Feng, X., Jia, H., Wang, J., & Nuli, Y. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.011 · Cited by 361
Electrochemistry of a nonaqueous lithium/sulfur cell
Yamin, H., & Peled, E. (1983) · Journal of Power Sources · doi:10.1016/0378-7753(83)87029-3 · Cited by 360
Howlett, P. C., Brack, N., Hollenkamp, A. F., Forsyth, M., & MacFarlane, D. R. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2164726 · Cited by 355
Manipulating surface reactions in lithium–sulphur batteries using hybrid anode structures
Huang, C., Xiao, J., Shao, Y., Zheng, J., Bennett, W. D., Lu, D., Saraf, L. V., Engelhard, M., Ji, L., Zhang, J., et al. (2014) · Nature Communications · doi:10.1038/ncomms4015 · Cited by 343
Self-citationFactors Which Limit the Cycle Life of Rechargeable Lithium (Metal) Batteries
Aurbach, D., Zinigrad, E., Teller, H., & Dan, P. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393349 · Cited by 340
Highly Reversible Lithium/Dissolved Polysulfide Batteries with Carbon Nanotube Electrodes
Fu, Y., Su, Y., & Manthiram, A. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201301250 · Cited by 334
Yim, T., Park, M.-S., Yu, J.-S., Kim, K. J., Im, K. Y., Kim, J.-H., Jeong, G., Jo, Y. N., Woo, S.-G., Kang, K. S., et al. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.06.039 · Cited by 328
Li, Z., Yuan, L., Yi, Z., et al. (2013) · ECS Meeting Abstracts · doi:10.1149/ma2013-02/2/42 · Cited by 322
Ionic Liquid Electrolytes for Lithium–Sulfur Batteries
Park, J.-W., Ueno, K., Tachikawa, N., Dokko, K., & Watanabe, M. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp408037e · Cited by 317
Nazar, L. F., Cuisinier, M., & Pang, Q. (2014) · MRS Bulletin · doi:10.1557/mrs.2014.86 · Cited by 314
All-solid-state Li/S batteries with highly conductive glass–ceramic electrolytes
Hayashi, A., Ohtomo, T., Mizuno, F., Tadanaga, K., & Tatsumisago, M. (2003) · Electrochemistry Communications · doi:10.1016/s1388-2481(03)00167-x · Cited by 312
Review of porous silicon preparation and its application for lithium-ion battery anodes
Ge, M., Fang, X., Rong, J., & Zhou, C. (2013) · Nanotechnology · doi:10.1088/0957-4484/24/42/422001 · Cited by 308
A Review on Li-S Batteries as a High Efficiency Rechargeable Lithium Battery
Barghamadi, M., Kapoor, A., & Wen, C. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.096308jes · Cited by 299
High performance lithium–sulfur batteries: advances and challenges
Xu, G., Ding, B., Pan, J., Nie, P., Shen, L., & Zhang, X. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02097a · Cited by 297
Zhang, S. S. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.002207jes · Cited by 297
A new direction for the performance improvement of rechargeable lithium/sulfur batteries
Zhang, S. S., & Read, J. A. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.076 · Cited by 289
Bryngelsson, H., Stjerndahl, M., Gustafsson, T., & Edström, K. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.050 · Cited by 276
Reduced graphene oxide film as a shuttle-inhibiting interlayer in a lithium–sulfur battery
Wang, X., Wang, Z., & Chen, L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.063 · Cited by 274
Rechargeable lithium batteries and beyond: Progress, challenges, and future directions
Amine, K., Kanno, R., & Tzeng, Y. (2014) · MRS Bulletin · doi:10.1557/mrs.2014.62 · Cited by 262
Liang, X., Wen, Z., Liu, Y., Zhang, H., Huang, L., & Jin, J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.12.052 · Cited by 257
Ionic liquid-enhanced solid state electrolyte interface (SEI) for lithium–sulfur batteries
Zheng, J., Gu, M., Chen, H., Meduri, P., Engelhard, M. H., Zhang, J.-G., Liu, J., & Xiao, J. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11553d · Cited by 255
Self-citationBusche, M. R., Adelhelm, P., Sommer, H., Schneider, H., Leitner, K., & Janek, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.02.075 · Cited by 249
Li, Z., & Yin, L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am507660y · Cited by 248
Improved lithium–sulfur cells with a treated carbon paper interlayer
Zu, C., Su, Y.-S., Fu, Y., & Manthiram, A. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp43394j · Cited by 245
Kim, H., Wu, F., Lee, J. T., Nitta, N., Lin, H., Oschatz, M., Cho, W. I., Kaskel, S., Borodin, O., & Yushin, G. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401792 · Cited by 240
A Lithium‐Sulfur Battery with a High Areal Energy Density
Kim, J., Hwang, T. H., Kim, B. G., Min, J., & Choi, J. W. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400935 · Cited by 230
In Situ Formed Lithium Sulfide/Microporous Carbon Cathodes for Lithium-Ion Batteries
Zheng, S., Chen, Y., Xu, Y., Yi, F., Zhu, Y., Liu, Y., Yang, J., & Wang, C. (2013) · ACS Nano · doi:10.1021/nn404601h · Cited by 230
Electrochemical performance of lithium/sulfur batteries with protected Li anodes
Lee, Y. M., Choi, N.-S., Park, J. H., & Park, J.-K. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00300-8 · Cited by 223
Wang, J., Lin, F., Jia, H., Yang, J., Monroe, C. W., & NuLi, Y. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405157 · Cited by 220
Selection of battery technology to support grid-integrated renewable electricity
Leadbetter, J., & Swan, L. G. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.05.081 · Cited by 202
Coated Lithium Powder (CLiP) Electrodes for Lithium‐Metal Batteries
Heine, J., Krüger, S., Hartnig, C., Wietelmann, U., Winter, M., & Bieker, P. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300815 · Cited by 192
Carbon‐Based Anodes for Lithium Sulfur Full Cells with High Cycle Stability
Brückner, J., Thieme, S., Böttger‐Hiller, F., Bauer, I., Grossmann, H. T., Strubel, P., Althues, H., Spange, S., & Kaskel, S. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302169 · Cited by 184
Improved cycle stability and high security of Li-B alloy anode for lithium–sulfur battery
Zhang, X., Wang, W., Wang, A., Huang, Y., Yuan, K., Yu, Z., Qiu, J., & Yang, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta01709a · Cited by 168
Stabilized Lithium–Metal Surface in a Polysulfide-Rich Environment of Lithium–Sulfur Batteries
Zu, C., & Manthiram, A. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501352e · Cited by 164
Xiong, S., Xie, K., Diao, Y., & Hong, X. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.072 · Cited by 160
Hassoun, J., Kim, J., Lee, D.-J., Jung, H.-G., Lee, S.-M., Sun, Y.-K., & Scrosati, B. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.11.060 · Cited by 159
Huang, J., Zhang, Q., Zhang, S., et al. (2013) · Carbon · doi:10.1016/j.carbon.2013.02.037 · Cited by 148
Rechargeable lithium sulfide electrode for a polymer tin/sulfur lithium-ion battery
Hassoun, J., Sun, Y., & Scrosati, B. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.06.093 · Cited by 148
Electrochemical properties of ether-based electrolytes for lithium/sulfur rechargeable batteries
Barchasz, C., Leprêtre, J., Patoux, S., et al. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.11.001 · Cited by 143
Enhanced cycle performance of Li–S battery with a polypyrrole functional interlayer
Ma, G., Wen, Z., Jin, J. H., et al. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.057 · Cited by 139
Chung, S., & Manthiram, A. (2014) · ChemSusChem · doi:10.1002/cssc.201301287 · Cited by 137
Xiong, S., Xie, K., Blomberg, E., Jacobsson, P., & Matic, A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.119 · Cited by 127
Younesi, R., Hahlin, M., Roberts, M. R., & Edström, K. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.011 · Cited by 115
Effects of SEI on the kinetics of lithium intercalation
Ratnakumar, B., Smart, M., & Surampudi, S. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00682-6 · Cited by 114
Jeddi, K., Sarikhani, K., Qazvini, N. T., et al. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.147 · Cited by 91
Barchasz, C., Leprêtre, J., Patoux, S., & Alloin, F. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.022303jes · Cited by 84
Song, J., Yeon, J.-T., Jang, J.-Y., Han, J., Lee, S., & Choi, N. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.101306jes · Cited by 79
Kulisch, J., Sommer, H., Brezesinski, T., et al. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp02220c · Cited by 64
The enhanced performance of Li–S battery with P14YRTFSI-modified electrolyte
Ma, G., Wen, Z., Jin, J. H., Wu, M., Zhang, G., Wu, X., & Zhang, J. (2013) · Solid State Ionics · doi:10.1016/j.ssi.2013.10.012 · Cited by 43
Self-citationJeddi, K., Zhao, Y. H., Zhang, Y., Konarov, A., & Chen, P. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.010308jes · Cited by 42
Effect of polypyrrole coating on Li powder anode for lithium-sulfur secondary batteries
Oh, S. J., & Yoon, W. Y. (2014) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-014-0490-y · Cited by 10
Cited by
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
Peng, H., Huang, J., Cheng, X., & Zhang, Q. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700260 · Cited by 1,746
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
Zhang, X., Cheng, X., Chen, X., Yan, C., & Zhang, Q. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605989 · Cited by 1,699
Advancing Lithium Metal Batteries
Liu, B., Zhang, J.-G., & Xu, W. (2018) · Joule · doi:10.1016/j.joule.2018.03.008 · Cited by 1,647
Self-citationHuang, J.-Q., Zhang, Q., & Wei, F. (2015) · Energy Storage Materials · doi:10.1016/j.ensm.2015.09.008 · Cited by 665
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Metadata
- Authors
- Cao, R., Xu, W., Lv, D., Xiao, J., & Zhang, J.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2015-04-10
- Volume
- 5
- Issue
- 16
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2073877889
- Cited by
- 502
- References
- 117
- FWCI
- 31.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.