The DOI matches its Crossref record; 164 of the 164 references it cites were found in a registry or an index.
Emerging 3D‐Printed Electrochemical Energy Storage Devices: A Critical Review
Abstract
Three‐dimensional (3D) printing, a layer‐by‐layer deposition technology, has a revolutionary role in a broad range of applications. As an emerging advanced fabrication technology, it has drawn growing interest in the field of electrochemical energy storage because of its inherent advantages including the freeform construction and controllable 3D structural prototyping. This article focuses on the topic of 3D‐printed electrochemical energy storage devices (EESDs), which bridge advanced electrochemical energy storage and future additive manufacturing. Basic 3D printing systems and material considerations are described to provide a fundamental understanding of printing technologies for the fabrication of EESDs. The performance metrics of 3D‐printed EESDs are then given and the related performance optimization strategies are discussed. Next, the recent advances of 3D‐printed EESDs, including sandwich‐type and in‐plane architectures, are summarized. Conclusions and future perspectives with some unique challenges and important directions are then discussed. It can be expected that, with the help of 3D printing technology, the development of advanced electrochemical energy storage systems will be greatly promoted.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Materials for electrochemical capacitors
Simon, P., & Gogotsi, Y. (2008) · Nature Materials · doi:10.1038/nmat2297 · Cited by 16,427
Electrical energy storage for the grid: A battery of choices
Dunn, B., Kamath, H., & Tarascon, J.-M. (2011) · Science · doi:10.1126/science.1212741 · Cited by 15,072
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A review of electrode materials for electrochemical supercapacitors
Wang, G., Zhang, L., & Zhang, J. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15060j · Cited by 9,152
Nanostructured materials for advanced energy conversion and storage devices
Aricò, A. S., Bruce, P., Scrosati, B., Tarascon, J.-M., & van Schalkwijk, W. (2005) · Nature Materials · doi:10.1038/nmat1368 · Cited by 8,826
Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries
Poizot, P., Laruelle, S., Grugeon, S., Dupont, L., & Tarascon, J.-M. (2000) · Nature · doi:10.1038/35035045 · Cited by 8,041
What are batteries, fuel cells, and supercapacitors?
Winter, M., & Brodd, R. J. (2004) · Chemical Reviews · doi:10.1021/cr020730k · Cited by 7,389
Nanomaterials for Rechargeable Lithium Batteries
Bruce, P. G., Scrosati, B., & Tarascon, J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702505 · Cited by 5,886
High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance
Augustyn, V., Come, J., Lowe, M. A., Kim, J. W., Taberna, P.-L., Tolbert, S. H., Abruña, H. D., Simon, P., & Dunn, B. (2013) · Nature Materials · doi:10.1038/nmat3601 · Cited by 5,177
Lithium Batteries: Status, Prospects and Future
Scrosati, B., & Garche, J. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.048 · Cited by 5,153
Electrochemical Supercapacitors : Scientific Fundamentals and Technological Applications
Conway, B. E. (2013) · CERN Document Server (European Organization for Nuclear Research) · Cited by 5,015
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
Advanced Materials for Energy Storage
Liu, C., Li, F., Ma, L., & Cheng, H. (2010) · Advanced Materials · doi:10.1002/adma.200903328 · Cited by 4,765
Carbon materials for the electrochemical storage of energy in capacitors
Frackowiak, E., & Béguin, F. (2001) · Carbon · doi:10.1016/s0008-6223(00)00183-4 · Cited by 4,523
Electrochemical capacitors: mechanism, materials, systems, characterization and applications
Wang, Y., Song, Y., & Xia, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00580a · Cited by 3,774
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
Battery materials for ultrafast charging and discharging
Kang, B., & Ceder, G. (2009) · Nature · doi:10.1038/nature07853 · Cited by 3,480
Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage
Bonaccorso, F., Colombo, L., Yu, G., Stoller, M., Tozzini, V., Ferrari, A. C., Ruoff, R. S., & Pellegrini, V. (2015) · Science · doi:10.1126/science.1246501 · Cited by 3,454
Kim, S., Seo, D., Ma, X., Ceder, G., & Kang, K. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200026 · Cited by 3,370
Room-temperature stationary sodium-ion batteries for large-scale electric energy storage
Pan, H., Hu, Y.-S., & Chen, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40847g · Cited by 3,319
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
The role of graphene for electrochemical energy storage
Raccichini, R., Varzi, A., Passerini, S., & Scrosati, B. (2015) · Nature Materials · doi:10.1038/nmat4170 · Cited by 2,687
Thackeray, M. M., Wolverton, C., & Isaacs, E. D. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21892e · Cited by 2,515
An ultrafast rechargeable aluminium-ion battery
Lin, M.-C., Gong, M., Lu, B., Wu, Y., Wang, D.-Y., Guan, M., Angell, M., Chen, C., Yang, J., Hwang, B.-J., et al. (2015) · Nature · doi:10.1038/nature14340 · Cited by 2,491
Relation between the Ion Size and Pore Size for an Electric Double-Layer Capacitor
Largeot, C., Portet, C., Chmiola, J., Taberna, P.-L., Gogotsi, Y., & Simon, P. (2008) · Journal of the American Chemical Society · doi:10.1021/ja7106178 · Cited by 2,445
True Performance Metrics in Electrochemical Energy Storage
Gogotsi, Y., & Simon, P. (2011) · Science · doi:10.1126/science.1213003 · Cited by 2,440
Best practice methods for determining an electrode material's performance for ultracapacitors
Stoller, M. D., & Ruoff, R. S. (2010) · Energy & Environmental Science · doi:10.1039/c0ee00074d · Cited by 2,282
Yan, J., Wang, Q., Wei, T., & Fan, Z. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300816 · Cited by 2,232
Nanostructured Materials for Electrochemical Energy Conversion and Storage Devices
Guo, Y., Hu, J., & Wan, L. (2008) · Advanced Materials · doi:10.1002/adma.200800627 · Cited by 2,223
Efficient storage mechanisms for building better supercapacitors
Salanne, M., Rotenberg, B., Naoi, K., Kaneko, K., Taberna, P.-L., Grey, C. P., Dunn, B., & Simon, P. (2016) · Nature Energy · doi:10.1038/nenergy.2016.70 · Cited by 2,181
Hybrid energy storage: the merging of battery and supercapacitor chemistries
Dubal, D. P., Ayyad, O., Ruiz, V., & Gómez-Romero, P. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00266k · Cited by 2,180
Aurbach, D. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00431-6 · Cited by 2,130
Nitrogen-doped mesoporous carbon of extraordinary capacitance for electrochemical energy storage
Lin, T., Chen, I.-W., Liu, F., Yang, C., Bi, H., Xu, F., & Huang, F. (2015) · Science · doi:10.1126/science.aab3798 · Cited by 2,075
A highly efficient polysulfide mediator for lithium–sulfur batteries
Liang, X., Hart, C., Pang, Q., Garsuch, A., Weiss, T., & Nazar, L. F. (2015) · Nature Communications · doi:10.1038/ncomms6682 · Cited by 2,062
Residual stresses in selective laser sintering and selective laser melting
Mercelis, P., & Kruth, J. (2006) · Rapid Prototyping Journal · doi:10.1108/13552540610707013 · Cited by 2,015
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
Bone tissue engineering using 3D printing
Bose, S., Vahabzadeh, S., & Bandyopadhyay, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.11.017 · Cited by 1,866
Liquid-Mediated Dense Integration of Graphene Materials for Compact Capacitive Energy Storage
Yang, X., Cheng, C., Wang, Y., Qiu, L., & Li, D. (2013) · Science · doi:10.1126/science.1239089 · Cited by 1,838
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Gross, B. C., Erkal, J. L., Lockwood, S. Y., Chen, C., & Spence, D. M. (2014) · Analytical Chemistry · doi:10.1021/ac403397r · Cited by 1,746
Olakanmi, E. O., Cochrane, R. F., & Dalgarno, K. W. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.03.002 · Cited by 1,742
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
3D‐Printing of Lightweight Cellular Composites
Compton, B. G., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201401804 · Cited by 1,626
Lithium–Sulfur Batteries: Progress and Prospects
Manthiram, A., Chung, S., & Zu, C. (2015) · Advanced Materials · doi:10.1002/adma.201405115 · Cited by 1,620
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
3D printing based on imaging data: review of medical applications
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R., Kauczor, H.-U., & Giesel, F. L. (2010) · International Journal of Computer Assisted Radiology and Surgery · doi:10.1007/s11548-010-0476-x · Cited by 1,584
Selective laser melting of iron-based powder
Kruth, J. P., Froyen, L., Van Vaerenbergh, J., Mercelis, P., Rombouts, M., & Lauwers, B. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2003.11.051 · Cited by 1,550
Carbon Nanomaterials for Advanced Energy Conversion and Storage
Dai, L., Chang, D. W., Baek, J., & Lu, W. (2012) · Small · doi:10.1002/smll.201101594 · Cited by 1,546
Supercapacitors Performance Evaluation
Zhang, S., & Pan, N. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401401 · Cited by 1,529
Direct laser writing of micro-supercapacitors on hydrated graphite oxide films
Gao, W., Singh, N., Song, L., Liu, Z., Reddy, A. L. M., Ci, L., Vajtai, R., Zhang, Q., Wei, B., & Ajayan, P. M. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.110 · Cited by 1,461
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
3D Printing of Interdigitated Li‐Ion Microbattery Architectures
Sun, K., Wei, T., Ahn, B. Y., Seo, J. Y., Dillon, S. J., & Lewis, J. A. (2013) · Advanced Materials · doi:10.1002/adma.201301036 · Cited by 1,341
Beidaghi, M., & Gogotsi, Y. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43526a · Cited by 1,293
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Li, H. B., Yu, M. H., Wang, F. X., Liu, P., Liang, Y., Xiao, J., Wang, C. X., Tong, Y. X., & Yang, G. W. (2013) · Nature Communications · doi:10.1038/ncomms2932 · Cited by 1,256
Advances in understanding mechanisms underpinning lithium–air batteries
Aurbach, D., McCloskey, B. D., Nazar, L. F., & Bruce, P. G. (2016) · Nature Energy · doi:10.1038/nenergy.2016.128 · Cited by 1,254
Highly conductive paper for energy-storage devices
Hu, L., Choi, J. W., Yang, Y., Jeong, S., La Mantia, F., Cui, L.-F., & Cui, Y. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0908858106 · Cited by 1,224
Three-Dimensional Battery Architectures
Long, J. W., Dunn, B., Rolison, D. R., & White, H. S. (2004) · Chemical Reviews · doi:10.1021/cr020740l · Cited by 1,194
Preparation, Structure, and Electrochemical Properties of Reduced Graphene Sheet Films
Tang, L., Wang, Y., Li, Y., Feng, H., Lu, J., & Li, J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200900377 · Cited by 1,178
Graphene-based materials for flexible supercapacitors
Shao, Y., El-Kady, M. F., Wang, L. J., Zhang, Q., Li, Y., Wang, H., Mousavi, M. F., & Kaner, R. B. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00316k · Cited by 1,154
Highly compressible 3D periodic graphene aerogel microlattices
Zhu, C., Han, T. Y.-J., Duoss, E. B., Golobic, A. M., Kuntz, J. D., Spadaccini, C. M., & Worsley, M. A. (2015) · Nature Communications · doi:10.1038/ncomms7962 · Cited by 1,148
Hybrid nanostructured materials for high-performance electrochemical capacitors
Yu, G., Xie, X., Pan, L., Bao, Z., & Cui, Y. (2013) · Nano Energy · doi:10.1016/j.nanoen.2012.10.006 · Cited by 1,103
Islam, M. S., & Fisher, C. A. J. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60199d · Cited by 1,079
Leong, K. F., Cheah, C. M., & Chua, C. K. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00030-9 · Cited by 1,076
Self-citationDirect 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels
Highley, C. B., Rodell, C. B., & Burdick, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201501234 · Cited by 1,043
3D-printing technologies for electrochemical applications
Ambrosi, A., & Pumera, M. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00714c · Cited by 1,040
Three‐Dimensional Battery Architectures
Long, J. W., Dunn, B., Rolison, D. R., & White, H. S. (2004) · ChemInform · doi:10.1002/chin.200451264 · Cited by 999
Multiprocess 3D printing for increasing component functionality
MacDonald, E., & Wicker, R. (2016) · Science · doi:10.1126/science.aaf2093 · Cited by 961
Luo, J.-Y., Cui, W.-J., He, P., & Xia, Y.-Y. (2010) · Nature Chemistry · doi:10.1038/nchem.763 · Cited by 948
Nonaqueous Li–Air Batteries: A Status Report
Luntz, A. C., & McCloskey, B. D. (2014) · Chemical Reviews · doi:10.1021/cr500054y · Cited by 925
The role of nanomaterials in redox-based supercapacitors for next generation energy storage devices
Zhao, X., Sánchez, B. M., Dobson, P. J., & Grant, P. S. (2011) · Nanoscale · doi:10.1039/c0nr00594k · Cited by 882
Multiscale metallic metamaterials
Zheng, X., Smith, W., Jackson, J., Moran, B., Cui, H., Chen, D., Ye, J., Fang, N., Rodriguez, N., Weisgraber, T., et al. (2016) · Nature Materials · doi:10.1038/nmat4694 · Cited by 870
Lasers and materials in selective laser sintering
Kruth, J. P., Wang, X., Laoui, T., & Froyen, L. (2003) · Assembly Automation · doi:10.1108/01445150310698652 · Cited by 826
Direct Ink Writing of Three‐Dimensional Ceramic Structures
Lewis, J. A., Smay, J. E., Stuecker, J., & Cesarano, J. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01382.x · Cited by 823
3D printing of functional biomaterials for tissue engineering
Zhu, W., Ma, X., Gou, M., Mei, D., Zhang, K., & Chen, S. (2016) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2016.03.014 · Cited by 822
A high-performance asymmetric supercapacitor fabricated with graphene-based electrodes
Zhang, J., Jiang, J., Li, H., & Zhao, X. S. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01354h · Cited by 800
Towards a calcium-based rechargeable battery
Ponrouch, A., Frontera, C., Bardé, F., & Palacín, M. R. (2016) · Nature Materials · doi:10.1038/nmat4462 · Cited by 794
Metal Sulfide Hollow Nanostructures for Electrochemical Energy Storage
Yu, X., Yu, L., & Lou, X. W. (. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501333 · Cited by 760
Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries
Fu, K., Wang, Y., Yan, C., Yao, Y., Chen, Y., Dai, J., Lacey, S., Wang, Y., Wan, J., Li, T., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505391 · Cited by 758
Influence of Fluid Physical Properties on Ink-Jet Printability
Jang, D., Kim, D., & Moon, J. (2009) · Langmuir · doi:10.1021/la900059m · Cited by 745
Three‐dimensional printing of porous ceramic scaffolds for bone tissue engineering
Seitz, H., Rieder, W., Irsen, S., Leukers, B., & Tille, C. (2005) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30291 · Cited by 742
All‐Solid‐State Lithium‐Ion Microbatteries: A Review of Various Three‐Dimensional Concepts
Oudenhoven, J. F. M., Baggetto, L., & Notten, P. H. L. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201000002 · Cited by 739
Graphene and carbon nanotube composite electrodes for supercapacitors with ultra-high energy density
Cheng, Q., Tang, J., Ma, J., Zhang, H., Shinya, N., & Qin, L.-C. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c1cp21910c · Cited by 733
Zhang, B., Kang, F., Tarascon, J.-M., & Kim, J.-K. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.08.002 · Cited by 720
Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores
Zhu, C., Liu, T., Qian, F., Han, T. Y.-J., Duoss, E. B., Kuntz, J. D., Spadaccini, C. M., Worsley, M. A., & Li, Y. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04965 · Cited by 720
On-chip and freestanding elastic carbon films for micro-supercapacitors
Huang, P., Lethien, C., Pinaud, S., Brousse, K., Laloo, R., Turq, V., Respaud, M., Demortière, A., Daffos, B., Taberna, P. L., et al. (2016) · Science · doi:10.1126/science.aad3345 · Cited by 719
Flexible Boron-Doped Laser-Induced Graphene Microsupercapacitors
Peng, Z., Ye, R., Mann, J. A., Zakhidov, D., Li, Y., Smalley, P. R., Lin, J., & Tour, J. M. (2015) · ACS Nano · doi:10.1021/acsnano.5b00436 · Cited by 712
Carbon Nanotubes and Graphene for Flexible Electrochemical Energy Storage: from Materials to Devices
Wen, L., Li, F., & Cheng, H. (2016) · Advanced Materials · doi:10.1002/adma.201504225 · Cited by 711
Nanowire Electrodes for Electrochemical Energy Storage Devices
Mai, L., Tian, X., Xu, X., Chang, L., & Xu, L. (2014) · Chemical Reviews · doi:10.1021/cr500177a · Cited by 700
Self-citationWu, R., Wang, D. P., Rui, X., Liu, B., Zhou, K., Law, A. W. K., Yan, Q., Wei, J., & Chen, Z. (2015) · Advanced Materials · doi:10.1002/adma.201500783 · Cited by 669
Self-citationZhang, H., Cao, G., Wang, Z., Yang, Y., Shi, Z., & Gu, Z. (2008) · Nano Letters · doi:10.1021/nl800925j · Cited by 649
Pikul, J. H., Gang Zhang, H., Cho, J., Braun, P. V., & King, W. P. (2013) · Nature Communications · doi:10.1038/ncomms2747 · Cited by 635
Polypyrrole-coated paper for flexible solid-state energy storage
Yuan, L., Yao, B., Hu, B., Huo, K., Chen, W., & Zhou, J. (2013) · Energy & Environmental Science · doi:10.1039/c2ee23977a · Cited by 623
Integrated 3D-printed reactionware for chemical synthesis and analysis
Symes, M. D., Kitson, P. J., Yan, J., Richmond, C. J., Cooper, G. J. T., Bowman, R. W., Vilbrandt, T., & Cronin, L. (2012) · Nature Chemistry · doi:10.1038/nchem.1313 · Cited by 617
Du Pasquier, A., Plitz, I., Menocal, S., & Amatucci, G. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00718-8 · Cited by 588
Nanostructured Electrodes for High‐Performance Pseudocapacitors
Lu, Q., Chen, J. G., & Xiao, J. Q. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201203201 · Cited by 579
Song, J., Yu, Z., Gordin, M. L., & Wang, D. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b03217 · Cited by 561
Unconventional supercapacitors from nanocarbon-based electrode materials to device configurations
Liu, L., Niu, Z., & Chen, J. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00041j · Cited by 557
Chalk, S. G., & Miller, J. F. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.04.058 · Cited by 545
The role of Li-ion battery electrolyte reactivity in performance decline and self-discharge
Sloop, S. E., Kerr, J. B., & Kinoshita, K. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00149-6 · Cited by 517
Direct Laser‐Patterned Micro‐Supercapacitors from Paintable MoS2 Films
Cao, L., Yang, S., Gao, W., Liu, Z., Gong, Y., Ma, L., Shi, G., Lei, S., Zhang, Y., Zhang, S., et al. (2013) · Small · doi:10.1002/smll.201203164 · Cited by 513
Direct writing in three dimensions
Lewis, J. A., & Gratson, G. M. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00344-x · Cited by 507
Material properties and fabrication parameters in selective laser sintering process
Gibson, I., & Shi, D. (1997) · Rapid Prototyping Journal · doi:10.1108/13552549710191836 · Cited by 488
Direct writing technology—Advances and developments
Hon, K. K. B., Li, L., & Hutchings, I. M. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.09.006 · Cited by 485
Progress in 3D Printing of Carbon Materials for Energy‐Related Applications
Fu, K., Yao, Y., Dai, J., & Hu, L. (2017) · Advanced Materials · doi:10.1002/adma.201603486 · Cited by 475
Qi, D., Liu, Y., Liu, Z., Zhang, L., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201602802 · Cited by 470
Obreja, V. V. N. (2008) · Physica E: Low-dimensional Systems and Nanostructures · doi:10.1016/j.physe.2007.09.044 · Cited by 463
Quantifying the promise of lithium–air batteries for electric vehicles
Gallagher, K. G., Goebel, S., Greszler, T., Mathias, M., Oelerich, W., Eroglu, D., & Srinivasan, V. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43870h · Cited by 460
Mechanical properties of dense polylactic acid structures fabricated by three dimensional printing
GIORDANO, R. A., Wu, B. M., Borland, S. W., Cima, L. G., Sachs, E. M., & Cima, M. J. (1997) · Journal of Biomaterials Science, Polymer Edition · doi:10.1163/156856297x00588 · Cited by 413
Liu, Z., Wu, Z., Yang, S., Dong, R., Feng, X., & Müllen, K. (2016) · Advanced Materials · doi:10.1002/adma.201505304 · Cited by 411
Chen, Y. M., Yu, X. Y., Li, Z., Paik, U., & Lou, X. W. (. (2016) · Science Advances · doi:10.1126/sciadv.1600021 · Cited by 405
Chu, A. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00364-6 · Cited by 389
Fabrication of highly conductive graphene flexible circuits by 3D printing
Zhang, D., Chi, B., Li, B., Gao, Z., Du, Y., Guo, J., & Wei, J. (2016) · Synthetic Metals · doi:10.1016/j.synthmet.2016.03.014 · Cited by 336
Ganesh, V., Pitchumani, S., & Lakshminarayanan, V. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.10.090 · Cited by 327
Dong, X., Guo, Z., Song, Y., Hou, M., Wang, J., Wang, Y., & Xia, Y. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201304001 · Cited by 324
Xiong, Z., Liao, C., Han, W., & Wang, X. (2015) · Advanced Materials · doi:10.1002/adma.201501983 · Cited by 311
3D printing of bone substitute implants using calcium phosphate and bioactive glasses
Bergmann, C., Lindner, M., Zhang, W., Koczur, K., Kirsten, A., Telle, R., & Fischer, H. (2010) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2010.04.037 · Cited by 311
3D printing: an emerging tool for novel microfluidics and lab-on-a-chip applications
Yazdi, A. A., Popma, A., Wong, W., Nguyen, T., Pan, Y., & Xu, J. (2016) · Microfluidics and Nanofluidics · doi:10.1007/s10404-016-1715-4 · Cited by 307
Effects of processing parameters on properties of selective laser melting Mg–9%Al powder mixture
Zhang, B., Liao, H., & Coddet, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.06.061 · Cited by 280
Wünscher, S., Abbel, R., Perelaer, J., & Schubert, U. S. (2014) · J. Mater. Chem. C · doi:10.1039/c4tc01820f · Cited by 278
3D printing of multifunctional nanocomposites
Campbell, T. A., & Ivanova, O. S. (2013) · Nano Today · doi:10.1016/j.nantod.2012.12.002 · Cited by 261
Three-dimensional printed electronics
Lewis, J. A., & Ahn, B. Y. (2015) · Nature · doi:10.1038/518042a · Cited by 249
Latest advances in the manufacturing of 3D rechargeable lithium microbatteries
Ferrari, S., Loveridge, M., Beattie, S. D., Jahn, M., Dashwood, R. J., & Bhagat, R. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.03.133 · Cited by 248
Holographic patterning of high-performance on-chip 3D lithium-ion microbatteries
Ning, H., Pikul, J. H., Zhang, R., Li, X., Xu, S. H., Wang, J., Rogers, J. A., King, W. P., & Braun, P. V. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1423889112 · Cited by 239
Xiao, X., Liu, P., Verbrugge, M. W., et al. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.08.058 · Cited by 235
Sun, Y., Lopez, J., Lee, H., Liu, N., Zheng, G., Wu, C., Sun, J., Liu, W., Chung, J. W., Bao, Z., et al. (2016) · Advanced Materials · doi:10.1002/adma.201504723 · Cited by 231
Helical 3D‐Printed Metal Electrodes as Custom‐Shaped 3D Platform for Electrochemical Devices
Ambrosi, A., Moo, J. G. S., & Pumera, M. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201503902 · Cited by 214
Hu, J., Jiang, Y., Cui, S., Duan, Y., Liu, T., Guo, H., Lin, L., Lin, Y., Zheng, J., Amine, K., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600856 · Cited by 214
Three dimensional (3D) printed electrodes for interdigitated supercapacitors
Zhao, C., Wang, C., Gorkin, R., Beirne, S., Shu, K., & Wallace, G. G. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.01.013 · Cited by 213
Sol‐Gel Inks for Direct‐Write Assembly of Functional Oxides
Duoss, E. B., Twardowski, M., & Lewis, J. A. (2007) · Advanced Materials · doi:10.1002/adma.200701372 · Cited by 211
Fabrication and properties of a carbon/polypyrrole three-dimensional microbattery
Min, H.-S., Park, B. Y., Taherabadi, L., Wang, C., Yeh, Y., Zaouk, R., Madou, M. J., & Dunn, B. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.10.003 · Cited by 204
Photopolymers for rapid prototyping
Liska, R., Schuster, M., Inführ, R., Turecek, C., Fritscher, C., Seidl, B., Schmidt, V., Kuna, L., Haase, A., Varga, F., et al. (2007) · Journal of Coatings Technology and Research · doi:10.1007/s11998-007-9059-3 · Cited by 197
Tang, Y., Zhang, Y., Rui, X., Qi, D., Luo, Y., Leow, W. R., Chen, S., Guo, J., Wei, J., Li, W., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505161 · Cited by 190
Engineered nanomembranes for smart energy storage devices
Wang, X., Chen, Y., Schmidt, O. G., & Yan, C. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00708a · Cited by 189
Tölle, F. J., Fabritius, M., & Mülhaupt, R. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201102888 · Cited by 165
A high-performance hard carbon for Li-ion batteries and supercapacitors application
Ni, J., Huang, Y., & Gao, L. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.09.047 · Cited by 158
Xie, B., Wang, Y., Lai, W., et al. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.04.045 · Cited by 155
Direct write dispenser printing of a zinc microbattery with an ionic liquid gel electrolyte
Ho, C. C., Evans, J. W., & Wright, P. K. (2010) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/20/10/104009 · Cited by 149
Three-Dimensional Printing of Highly Conductive Carbon Nanotube Microarchitectures with Fluid Ink
Kim, J.-H., Lee, S., Wajahat, M., Jeong, H., Chang, W. S., Jeong, H. J., Yang, J., Kim, J. T., & Seol, S. K. (2016) · ACS Nano · doi:10.1021/acsnano.6b04771 · Cited by 147
Goulas, A., Binner, J. G. P., Harris, R. A., & Friel, R. J. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2016.11.004 · Cited by 146
Hu, H., Pei, Z., & Ye, C. (2015) · Energy storage materials · doi:10.1016/j.ensm.2015.08.005 · Cited by 143
Anomalous or regular capacitance? The influence of pore size dispersity on double-layer formation
Jäckel, N., Rodner, M., Schreiber, A., Jeongwook, J., Zeiger, M., Aslan, M., Weingarth, D., & Presser, V. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.03.015 · Cited by 140
Vu, A., Li, X., Phillips, J. R., Han, A., Smyrl, W. H., Bühlmann, P., & Stein, A. (2013) · Chemistry of Materials · doi:10.1021/cm400915p · Cited by 140
Advanced hybrid Li–air batteries with high-performance mesoporous nanocatalysts
Li, L., Chai, S., Dai, S., & Manthiram, A. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00814f · Cited by 139
Toward fast and cost-effective ink-jet printing of solid electrolyte for lithium microbatteries
Delannoy, P.-E., Riou, B., Lestriez, B., Guyomard, D., Brousse, T., & Bideau, J. L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.164 · Cited by 131
Tooming, T., Thomberg, T., Kurig, H., Jänes, A., & Lust, E. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.01.157 · Cited by 118
Printing nanostructured carbon for energy storage and conversion applications
Lawes, S., Riese, A., Sun, Q., et al. (2015) · Carbon · doi:10.1016/j.carbon.2015.04.008 · Cited by 105
Fabrication of High-Aspect-Ratio Electrode Arrays for Three-Dimensional Microbatteries
Chamran, F., Yeh, Y.-T., Min, H., Dunn, B., & Kim, C. (2007) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2007.901638 · Cited by 93
Soavi, F., Bettini, L. G., Piseri, P., Milani, P., Santoro, C., Atanassov, P. B., & Arbizzani, C. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.04.131 · Cited by 93
Electric vehicles: Driving range
Kempton, W. (2016) · Nature Energy · doi:10.1038/nenergy.2016.131 · Cited by 91
Pursuing two-dimensional nanomaterials for flexible lithium-ion batteries
Liu, B., Zhang, J., & Shen, G. (2016) · Nano Today · doi:10.1016/j.nantod.2016.02.003 · Cited by 89
Direct Reduction of Graphene Oxide by Ni Foam as a High-Capacitance Supercapacitor Electrode
Yang, J., Zhang, E., Li, X., Yu, Y., Qu, J., & Yu, Z. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11337 · Cited by 86
Versatile Graphene Oxide Putty‐Like Material
Jiang, Y., Shao, H., Li, C., et al. (2016) · Advanced Materials · doi:10.1002/adma.201603284 · Cited by 80
Arbitrary Shape Engineerable Spiral Micropseudocapacitors with Ultrahigh Energy and Power Densities
Tian, X., Shi, M., Xu, X., Yan, M., Xu, L., Minhas‐Khan, A., Han, C., He, L. M., & Mai, L. (2015) · Advanced Materials · doi:10.1002/adma.201503567 · Cited by 77
Self-citationDroplet streams for serial crystallography of proteins
Weierstall, U., Doak, R. B., Spence, J. C. H., Starodub, D., Shapiro, D. A., Kennedy, P., Warner, J., Hembree, G. G., Fromme, P., & Chapman, H. N. (2007) · Experiments in Fluids · doi:10.1007/s00348-007-0426-8 · Cited by 75
Aravindan, V., Jayaraman, S., Kumar, P. S., Shubha, N., Ling, W. C., Ramakrishna, S., & Srinivasan, M. (2013) · Nanoscale · doi:10.1039/c3nr04486f · Cited by 68
Graphitic Petal Micro‐Supercapacitor Electrodes for Ultra‐High Power Density
Xiong, G., Meng, C., Reifenberger, R. G., Irazoqui, P. P., & Fisher, T. S. (2014) · Energy Technology · doi:10.1002/ente.201402055 · Cited by 50
3D‐Printed Structural Pseudocapacitors
Liu, X., Jervis, R., Maher, R. C., Villar‐García, I. J., Marlow, M. N., Shearing, P. R., Ouyang, M., Cohen, L. F., Brandon, N. P., & Wu, B. (2016) · Advanced Materials Technologies · doi:10.1002/admt.201600167 · Cited by 42
Integration of dispenser-printed ultra-low-voltage thermoelectric and energy storage devices
Wang, Z., Chen, A., Winslow, R., Madan, D., Juang, R.-C., Nill, M., Evans, J. W., & Wright, P. K. (2012) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/22/9/094001 · Cited by 40
3D/4D Printing Hydrogel Composites: A Pathway to Functional Devices
Bakarich, S. E., Gorkin, R. A., III, Naficy, S., Gately, R. D., Panhuis, M. I. H., & Spinks, G. M. (2015) · MRS Advances · doi:10.1557/adv.2015.9 · Cited by 40
Graphene based integrated tandem supercapacitors fabricated directly on separators
Chen, W., Xia, C., & Alshareef, H. N. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.03.040 · Cited by 38
How Pore Parameters Affect Li Ion Depletion in Mesoporous Materials for Lithium-Ion Batteries
Lee, K. J., Bak, W., Kim, J., et al. (2015) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b00128 · Cited by 18
Direct-growth carbon nanotubes on 3D structural microelectrodes for electrophysiological recording
Pan, A. I., Lin, M.-H., Chung, H.-W., Chen, H., Yeh, S., Chuang, Y., Chang, Y., & Yew, T. (2015) · The Analyst · doi:10.1039/c5an01750e · Cited by 16
Cited by
A Review of Stereolithography: Processes and Systems
Huang, J., Qin, Q., & Wang, J. (2020) · Processes · doi:10.3390/pr8091138 · Cited by 597
Polymeric composites for powder-based additive manufacturing: Materials and applications
Yuan, S., Shen, F., Chua, C. K., & Zhou, K. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.11.001 · Cited by 525
Self-citation3D MXene Architectures for Efficient Energy Storage and Conversion
Li, K., Liang, M., Wang, H., Wang, X., Huang, Y., Coelho, J., Pinilla, S., Zhang, Y., Qi, F., Nicolosi, V., et al. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000842 · Cited by 498
Printed supercapacitors: materials, printing and applications
Zhang, Y.-Z., Wang, Y., Cheng, T., Yao, L.-Q., Li, X., Lai, W.-Y., & Huang, W. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00819h · Cited by 497
3D printing technologies for electrochemical energy storage
Zhang, F., Wei, M., Viswanathan, V. V., Swart, B., Shao, Y., Wu, G., & Zhou, C. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.037 · Cited by 494
Metadata
- Authors
- Tian, X., Jin, J., Yuan, S., Chua, C. K., Tor, S. B., & Zhou, K.
- Venue
- Advanced Energy Materials
- Publisher
- Wiley
- Published
- 2017-05-02
- Volume
- 7
- Issue
- 17
- ISSN
- 1614-6832 (ISSN-L)
- 1614-6840
- OpenAlex
- W2610652639
- Cited by
- 407
- References
- 164
- FWCI
- 12.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.